Search Results

Search found 3312 results on 133 pages for 'freebsd ports'.

Page 86/133 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Getting started with VNC

  - by Stephen

  I have subscribed to a VPS service for the purpose of running some remote applications. To do this I'm going to need a remote desktop of one sort or another. With this in mind it was suggested that I try Ubuntu. The installation that was prepared for me was Ubuntu 11.10 64 bit (Ubuntu 11.10 (GNU/Linux 2.6.18-348.4.1.el5.028stab107.1 x86_64)) From here I used apt-get install ubuntu-desktop which completed successfully. I rebooted the machine and reconnected via ssh. When I attempt to connect from TightVNC on my Windows machine I get a message about the session being actively refused. What should I do to confirm the service is running? Do I need to setup a firewall rule to allow the ports to pass through? (I am a linux newb so explicitness is appreciated)

  Read the article

• APF, IPTABLES, Fedora 15 - Not blocking correctly

  - by RichardW11

  I just got a new remote server which came with Fedora 15. I first tried to run APF but it gave me this error "apf(18031): {glob} unable to load iptables module (ip_tables), aborting.". Which I then set SET_MONOKERN="0" to SET_MONOKERN="1" to resolve the problem. However, with my config file showing BLK_P2P_PORTS="1214,2323,4660_4678,6257,6699,6346,6347,6881_6889,6346,7778" The ports show up as closed, instead of being filtered. Any idea why this would be happening? 22/tcp open ssh 80/tcp open http 443/tcp open https 2323/tcp closed 3d-nfsd 4662/tcp closed edonkey 6346/tcp closed gnutella 6699/tcp closed napster 6881/tcp closed bittorrent-tracker 7778/tcp closed interwise

  Read the article

• Having internet on a VirtualBox

  - by S4M

  I am running a linux laptop and I set up a VirtualBox under windows XP. My only problem is the VirtualBox doesn't seem to be connected to internet - When I do the connection diagnosis it tells me there is no connection. I am using an NAT adapter, and I bind the port 80 from my computer to the port 80 of the VirtualBox, and same for the ports 8080, but still no result. I would be grateful is someone could help me to sort this out. EDIT: thinking of it, what is making the problem hard - and painful - is the absence of error message. If I try to use a given adapter to share my computer's connection with the VirtualBox, and it doesn't work, I have no way to know why. So, it would be really helpful if someone could share a way to access this king of information (is there a log file somewhere or a way to run VirtualBox from command line in a verbose mode?).

  Read the article

• Squid3 not working. Access denied.

  - by Nitish

  I installed SQUID3 on a Linux machine with two ethernet interfaces (eth0 and eth1). I used the default settings in the squid.conf file and uncommented the two lines acl localnet src 192.168.0.0/16 and http_access allow localnet. eth0 is connected to a router, which provides Internet access. It is assigned an IP 192.168.1.2 by the router. I manually configured eth1 to have an IP address 192.168.5.1. It is connected to a switch. Systems having IP addresses 192.168.5.x are connected to this switch. I ran these two commands for NAT: iptables -t nat -A PREROUTING -i eth1 -p tcp -m tcp --dport 80 -j DNAT --to-destination 192.168.5.1:3128 iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j REDIRECT --to-ports 3128 But when I try to access internet from a system having IP 192.168.5.2 through the proxy I get an error that says "Access denied". What is wrong with my configuration?

  Read the article

• JBoss behind NAT hostname problem

  - by z0mbix

  My company has a JBoss cluster sitting behind a firewall that performs NAT. We forward ports to JBoss from the firewall, so that our client application can access the server. We are having trouble when JBoss replies it tells the clients to connect to the internal hostname, not the external one with which the initial connection was made. Is this something that is easily resolved/configured? How are other JBoss app servers configured behind NAT firewalls? Split-horizon DNS? Many Thanks

  Read the article

• Setting up linux server with multiple access rights

  - by Mark

  I am a graduate student and want to set up a linux server (preferably Ubuntu) in my office. I also want to give my friends SSH access to that box. My question is can I set up my server such that I can give one of my friends rights to install software on my machine but he cannot brows around outside the directory he is allowed to? Can I set up multiple apache instances (on different ports) for different people? so each has access to their own apache instance?

  Read the article

• Issues connecting to a pix 501 via console cable

  - by Bourne

  Have a pix 501 that was set up to do filtering and I was working on setting the vpn up when I lost ssh connectivity. Looking at the front, all 4 lan lights blink intensely green but in a very repetitive pattern. The funny thing is there are only 3 devices connected to the 4 ports so that's the first element that doesn't look right to me. Console cable light doesn't turn on when cable is plugged in and have tried rebooting it many many times to see the bootup sequence with no result. Also, I cannot connect to it via pdm or console but the traffic is permitted through. Are there any additional troubleshooting steps I could do or should I count it as dead? Thank you.

  Read the article

• D Link DSL G624T Router will work wirelessly but not via cable

  - by Andy Fensome

  I have a D Link router which works in providing a wireless internet connection for my main PC and secondary notebook. I have been advised that the internet connection to the main pc will be better if I wire the router directly to the PC. I have tried this and can not get a connection. I just keep getting the message network cable unplugged. I have had the ethernet adaptor checked out on the pc and the cable is good ( also checked out). Anything I can do or do I have a bad router. I have tried the cable in all 4 ports and the message is still the same.

  Read the article

• Windows Server 2003: Nat Port Forwarding Not Working

  - by jM2.me

  The setup is following: Internet (108.99.XXX.XX) <- Windows Server 2003 (10.0.0.1) <- Switch <- Office Computers (10.0.0.100-200 some static routes some manual some automatic) Windows Server has NAT installed on it and two network interfaces are configured properly. The problem is, whenever I try to forward port 80 (or any other) from office computer (lets say 10.0.0.100), it fails. Nic #1 Settings: All settings are obtained from ISP Nic #2 Settings: Set manually IP: 10.0.0.1 Mask: 255.255.255.0 Nat Server is configured to automatically assign IP addresses to private network. Settings are: IP: 10.0.0.0 Mask: 255.255.255.0 Forwarding was done in Routing and Remote Access (local) - IP Routing - NAT/Basic Firewall - Local Area Connection (right click_properties) - services and ports - Web Server HTTP - Private Address: 10.0.0.100 SO what is causing the problem of failure to forward any port from other computer inside private network?

  Read the article

• Unknown device error installing Lexmark printer in Vista

  - by packotjimmy

  I have been using Lexmark X3650 All-In-One on my Windows Vista Desktop PC for a year without problem. Yesterday, I was prompted to plug in the USB from the printer and after that I got errors: "The USB device has malfunctioned." ,"The unknown device has been installed unsuccessfully.". Then, the printer just stoped responding. I have uninstalled the driver from Device Manager and software (using Lexmark's clean utility), rebooted, reinstalled, same thing, tried different ports/cable. Vista displays these two errors stated above immediately upon plug in. Please help me!

  Read the article

• How to stop live network traffic displayed in terminal?

  - by Jakobud

  For our network we are working on building a new firewall box and we just installed Smoothwall on it to test it out. When I start up the box, before the login prompt even appears, all of the live IP traffic is appearing in the terminal (source/destination IPs, MACs, Ports, etc). I wait for the boot sequence to finish, but all I see is this IP traffic. The login prompt never comes up. I finally get sick of waiting and press CTRL + C and it says "Entering Run Level 3" and then I get a login prompt finally. Once I login, the IP traffic continues to fly through the terminal even as I'm trying to type commands. How do I turn this stuff off? Is this the default setting for Smoothwall to have all this IP traffic going by on the screen? It essentially renders using the terminal to being useless.

  Read the article

• Software to create a virtual parallel port in Windows XP?

  - by drknexus

  I am writing a program that will eventually be used on a computer with a physical parallel port and will need to set certain pins high or low in order to signal to an external device. However, the development laptop I am using does not have any physical parallel ports and is too low powered to run a virtual machine. Is there any option available that will create a virtual parallel port within Windows XP? Ideally it would include a debug mode that would allow me to see what values have been pushed out on the parallel port.

  Read the article

• DNS for route between WAN & LAN

  - by David Maitland

  I have a few machines set up on my internal 192.168.1.* network and i have one public ip, my router is links all ports to on internal linux machine on my network 192.168.1.3. I want to know how to configure the DNS server on my linux box to forward to internal LAN ip's depending on the host name. EG. computer4.83.22.56.12 would find my box then forward to 192.168.1.4 on the local network. This is so i can run multiple web server under one ip. btw, i use Ubuntu. Thanks Dave

  Read the article

• Linux router with diffent gateways for incomming and outgoing connections

  - by nkout

  I have the following topology: LAN Users:192.168.1.2 - 254 (192.168.1.0/24) gateway1: 192.168.2.2/24 used for all outgoing connections of LAN users (default gateway) gateway2: 192.168.3.2/24 used for incoming services (destination NAT, ports 80,443 are forwarded to 192.168.2.1) linux router-server R eth0 192.168.1.1/24: LAN eth1 192.168.2.1/24: WWAN1 eth2 192.168.3.1/24: WWAN2 I want to: route all outgoing traffic coming from LAN and R via 192.168.2.2 route the responses to incoming connections via 192.168.3.2 My config: ifconfig eth0 up 192.168.1.1 netmask 255.255.255.0 ifconfig eth1 up 192.168.2.1 netmask 255.255.255.0 ifconfig eth2 up 192.168.3.1 netmask 255.255.255.0 echo 0 >/proc/sys/net/ipv4/ip_forward route add default gw 192.168.2.2 iptables -t nat -A POSTROUTING -d !192.168.0.0/16 -j MASQUERADE I want to add iptables rule to mark incoming traffic from WWAN2 and send back the responses to WWAN2, while keeping default gateway on WWAN1

  Read the article

• How can I force certain applications to use specific network connections?

  - by snicker

  Let's say I have two active network connections that let me out to the internet. I want certain applications to only use Network Connection 1, while some others should use Network Connection 2. Is this possible in Windows XP? If so, how can it be done? The main reason I wish to do this is I want to use a tethered phone's network for certain applications and an ethernet connection for others. Certain ports and networks are blocked by the ethernet connection, whereas they are not on my tethered phones connection.

  Read the article

• VM VirtualBox, Ubuntu 9.10: USB memory stick and SD card not detected...

  - by vikramtheone

  Hello Guys, I have installed Ubuntu9.10 on VM VirtualBox, on my HP laptop. My laptop has several USB ports and also a SD card port. Unfortunately, I'm unable to access both, my pen-drive on the USB port and my 8GB SD card inserted in the SD Card port. Can anyone suggest me what I should do for my Ubuntu to detect both of them? I have installed all latest updates on Ubuntu. I'm able to use my USB mouse. Thank you Vikram

  Read the article

• PNY ExpressCard SATA II 2-port card - drivers?

  - by stewartwb

  I bought a couple of PNY eSATA cards for notebook computers, model P-NSA2-EC-RF. I mistakenly thought that they would be a bit more plug-and-play, like cards that supply USB or Firewire ports. They did not ship with the Driver CD, and the drivers I found on the PNY web site didn't work. I've emailed their support group, but we all know how likely it is that they will respond before the end of the decade. Does anyone have a driver disc handy for this model card, or know where I might download a driver ISO? (Dell XPS M1330 laptop running Windows 7 x64 and sometimes Windows 7 x86)

  Read the article

• Can't connect to server from certain machines

  - by Joel Coel

  On a small college campus we have a VLAN setup for the computer labs. These machines get assigned IP addresses in the 192.168.7.xxx range. In the server room, all of the server are on the default VLAN and assigned an IP address in the 10.1.1.xxx range. For the most part this works, but the lab machines are unable to connect to one of the servers. They can't even ping it. They can talk to other servers on the same switch as this server just fine. At first I thought it might be a vlan issue, but I changed the server port vlan to match other known-working ports with no effect. Any ideas?

  Read the article

• access server from blocked machine

  - by user40994

  I want to access my Linux server(vnc) from a distant machine which has most ports blocked with the exception of 21, 25, 80, 135, and 445. So, I would like to know if theres a way to communicate with my vnc server on the server, while using an available port on client. i.e. port 25 So I think essentially I need the serverside router to forward packets coming in on port 25 to linux server machine(servername, p5900), which should forward them on to itself on port 5900. And when transmitting, I need the server OR to router to send out packets changing their port to 25. Im totally lost on how to acheive this. Please help(much appreciated). Thanks I do not use smtp.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• What's the best multiple monitor setup I can buy for $500 and a macbook?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Is there a feature in Nagios that allows Memory between checks?

  - by Kyle Brandt

  There are various instances where there are values I want to monitor with Nagios, and I don't care as much about the value itself, but rather how it compares to the previous value. For instance, I wrote one to check the fail counters in OpenVZ. In this case, I didn't care about the value that much, but rather I cared if the value increased. Another example might be switch ports, I would be most interested to get alerted about the change of state of a port (Although perhaps a trap would be better for this one). For my OpenVZ script, I used a temp file, but I am wondering if there is a better way? Maybe Nagios has some variables that plugins (check scripts) can access that are persistent across checks?

  Read the article

• Windows 2003 Server Suddenly Drops Connections to everything but PING and port 80 (webserver)

  - by Urda

  Hi, I'm running a Windows 2003 Dedicated server, and the box has been rock solid for more than 2 years now. Just recently, I have had an issue where after a certain ammount of time the server will just stop accepting connections on all ports except 80, and still responds to pings. If you surf to a static HTML page on the box, you can display it. If you pull up a PHP file that has an outside database connection, it fails. RDP refuses to connect, and LogMeIn reports that "The connection was reset" The only fix at this time is to have the provider physically reboot my box to correct the issue. The event log doesn't seem to be leaving helpful messages, and I am at a lost to what is causing this error since I have not installed any new software in months on it. Any tips or help would be appreciated to tracking down this issue. I don't mind updating the question as responses come in, I just do not know where to start troubleshooting because it seems random at this time.

  Read the article

• How to install windows on a server with no CD or DVD drive

  - by user29266

  I've found a few posts on this site, however my situation is different. I have a new Dell server with no OS installed. I would like to install Windows 2008 Web Edition. I have a few USB ports and Ethernet. No CD or DVD drives. Is this article the best & only way to proceed? Installing Windows 2008 via USB thumbdrive or should I just get a external hardrive and hook it up to a usb. Once the OS is installed I'll never need a DVD drive again - so that's idea is a waste of money.

  Read the article

• WD Elements Desktop External - Not recognised on a single computer

  - by Aelexe

  My WD Elements Desktop External is no longer recognised on my main computer. It has worked fine in the past, but now all of a sudden is not detected. It does not prompt when plugged in, nor does it show up in the disc management interface or the device manager. It appears to be aware that it is plugged in however as the light on the external blinks rapidly for a short while after being plugged in. The strangest thing however is that it works fine on other computers, including my family computers and my laptop. I have attempted to troubleshoot the issue by trying various USB devices in multiple ports on each system to see if there is any correlation with the issue, but have come up with nothing that gives me an idea of what is going on. I have also attempted to format the external using my laptop, but that has not helped either. If anyone has had a similar issue, or knows of any potential solutions, please post your advice. Thanks for your time.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >