Search Results

Search found 3312 results on 133 pages for 'freebsd ports'.

Page 90/133 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Gateway ZA8 Netbook graphics Issue

  - by Hansel

  The graphics keep tearing and are barely usable anytime I try to use my Netbook. And I did a full install with Ubuntu so I'm pretty much stuck. These are the specs of the Netbook: Processor AMD Athlon™ 64 L110 Single-Core Processor (1.2GHz, 800MHz FSB, 512KB L2 Cache)6 Operating System Genuine Windows Vista® Home Basic (32-bit) with SP1 Display 11.6" HD WXGA Ultrabright™ LED-backlit Display (1366 x 768 resolution, 16:9 aspect ratio)7 Memory 2048MB DDR2 533MHz SDRAM Single Channel Memory8 Hard Drive 250GB SATA hard drive2 Color Classic and Elegant Design with Cherry Red finish Wireless Network 802.11b/g Wi-Fi CERTIFIED®3 Adapter AC Adapter Application Software Microsoft® Works, Microsoft® Money Essentials, Microsoft® Office Home and Student 2007 (60-day complimentary trial period)1 Battery 6-Cell Lithium Ion (5200mAh) Chassis Chassis with ATI Radeon® X1270 Graphics and AMD RS690E Chipset8 Dimensions (Box) 3.1" (H) x 14.8" (W) x 10.1" (D) or 80mm (H) x 376mm (W) x 256mm (D) Dimensions (System) 1.03" (H) x 11.26" (W) x 7.99" (D) or 26.4mm (H) x 286mm (W) x 203mm (D) External Ports (3) USB 2.0, VGA Connector Keyboard and Mouse Keyboard with Multi-Gesture Touchpad Media Card Reader Multi-in-1 Digital Media Card Reader (Memory Stick®, Memory Stick Pro™, MultiMediaCard, Secure Digital™, xD-Picture Card™) Network 10/100 Ethernet LAN (RJ-45 port) What can I do?

  Read the article

• Cedarview drivers boot to a blank screen

  - by map7

  I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• Getting into driver development for linux [closed]

  - by user1103966

  Right now, I've been learning about writing device-drivers for linux 3.2 kernel for about 2 months. So far I have been able program simple char drivers that only read and write to a fictitious dev structure like a file, but now I'm moving to more advance concepts. The new material I've learned about includes I/O port manipulation, memory management, and interrupts. I feel that I have a basic understanding of overall driver operation but, there is still so much that I don't know. My question is this, given that I have the basic theory of how to write a dev-driver for a piece of hardware ... how long would it take to actually develop the skills of writing actual software that companies would want to employ? I plan on getting involved in an open-source project and building a portfolio. Also what type of beginner drivers could I write for hardware that would best help me develop my skills? I was thinking that taking on a project where I design my own key logger would easy and a good assignment to help me understand how IO ports and interrupts are used. I may want to eventually specialize in writing software for video cards or network devices though these devices seem beyond my understanding at the moment. Thanks for any help

  Read the article

• BPM 11gR1 now available on Amazon EC2

  - by Prasen Palvankar

  BPM 11gR1 now available on Amazon EC2The new Oracle BPM 11gR1, including the latest Oracle SOA Suite 11gR1 Patchset-2 is now available as an Amazon Machine Image (AMI). This is a fully configured image which requires absolutely no installation and lets you get hands on experience with the software within minutes. This image has all the required software installed and configured and includes the following:Oracle 11g Database Standard Edition Oracle SOA Suite 11gR1 Patch-set 2Oracle BPM 11gR1Oracle Webcenter with BPM Process SpacesOracle Universal Content ManagementOracle JDeveloper with SOA and BPM pluginsNote: Use of this AMI requires acceptance of Oracle Technology Network (OTN) terms of use.To use this AMI, follow these steps: Login to your Amazon account and browse to Amazon AWS Console. If this is the first time you are using Amazon Web Services please visit https://aws.amazon.com/ec2/ for information on Amazon Elastic Cloud Computing and how to get started with Amazon EC2Make sure your security group that you will be using to launch the instance allows the following ports to be opened:22 (SSH)1521, 7001, 8001, 8888, 9001Click on AMIsChange the Viewing filters to 64-bit and enter soa-bpm in the search box. You should see the following AMI:083342568607/oracle-soa-bpm-11gr1-ps2-4.1-pubSelect the AMI and click on Launch or Spot Request. For more information on spot requests, please visit the Amazon EC2 link aboveAccept all the defaults and launch the instanceWhen the instance state changes to running, copy the assigned public host name and connect to it using either PuTTY or SSH command. For PuTTY usage, refer to this document.Once you are connected to the instance using PuTTY or SSH, you will be presented with the terms of use.Accept the terms of use to proceed. This will prompt you to set passwords for your oracle OS login as well as for VNC. Note that the instance will not be usable until you have accepted the terms of use.The instance is now ready to use. The SOA/BPM and other servers are automatically started once you accept the term of use. Initial startups can take about 5-10 minutes.If you would like to use the JDeveloper installed in the AMI, you can access it either using VNC or NX. You can get the NX client from NoMachine./home/oracle/README.txt contains all the URLs that you can use to access the Enterprise Manager, BPM Composer, BPM Workspace, Webcenter etc.

  Read the article

• Host is unreacheble with static networking configuration via /etc/network/interfaces while GUI NetworkManager is ok

  - by Riccardo

  I have some trouble setting-up the network interface using the static IP configuration. I run ubuntu 12.04 kernel 3.11.0-22 with the back-ports enabled. I followed these instructions from help.ubuntu.com but there seems to exist some conflict between the GUI approach (NetworkManager) and the command line approach. $ sudo nano /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.1.1.50 gateway 10.1.1.10 netmask 255.255.255.0 dns-nameservers 192.168.3.45 192.168.8.10 $ sudo /etc/init.d/networking restart I than try to ping for example google.com ping -c 3 www.google.com the response is that the host is unreachable. The icon on the top right of the desktop says: wired network disconnected. If I work using the GUI approach (Edit Connections and so on...) all works great. Can same one explain to me where I wrong? $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 90:e6:ba:07:4a:77 inet addr:10.1.1.50 Bcast:10.1.1.255 Mask:255.255.255.0 inet6 addr: fe80::92e6:baff:fe07:4a77/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:39619 errors:0 dropped:0 overruns:0 frame:0 TX packets:18520 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:19030895 (19.0 MB) TX bytes:2768769 (2.7 MB) $ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0

  Read the article

• Lenovo Ideapad 205 and Ubuntu 12.04 LTS

  - by Oranges

  I just wanted to report one thing, because I know there are a lot of Ideapad S205 users out there, that had issues running Ubuntu on their Lenovo Ideapad S205 in the past. Lenovo Ideapad with Ubuntu 12.04 LTS: Everything works out of the box. I just installed it and everything, including the microphone, the webcam, the WLAN, the AMD E-350 CPU/GPU and the sound worked right away. In other words: Everything works. Even the AMD E-350 GPU works very well with the Open Source drivers and with the prop. drivers. The prop. drivers were automatically offered to me via Ubuntu itself. It works great. A long idea, written short: I love it. It's extremly stable and very fast. I am using the German version of the Idepad S205, combined with the 32bit version of Ubuntu. There is only one, single thing to keep in mind when installing Ubuntu on the S205: Plugin your USB/CD/DVD drive in the left USB-Port. I don't know why, but it only works with the USB-Port on the left side of the Netbook. This is only for installing Ubuntu. After it has been installed and updated successfully, all of the USB ports will work. Oranges - feedback on Lenovo S205 with Ubuntu 12.04 LTS.

  Read the article

• Windows Azure Database (SQL Azure) Development Tip

  - by BuckWoody

  When you create something in the cloud, it's real, and you're charged for it. There are free offerings, and you even get free resources with your Microsoft Developer Network (MSDN) subscription, but there are limits within those. Creating a 1 GB database - even with nothing in it - is a 1 GB Database. If you create it, drop it, and create it again 2 minutes later, that's 2 GB of space you've used for the month. Wait - how do I develop in this kind of situation? With Windows Azure, you can simply install the free Software Development Kit (SDK) and develop your entire application for free - you need never even log in to Windows Azure to code. Once you're done, you simply deploy the app and you start making money from the application as you're paying for it. Windows Azure Databases (The Artist Formerly Known As SQL Azure) is a bit different. It's not emulated in the SDK - because it doesn't have to be. It's just SQL Server, with some differences in feature set. To develop in this environment, you can use SQL Server, any edition. Be aware of the feature differences, of course, but just develop away - even in the free "Express" or LocalDB flavors - and then right-click in SQL Server Management Studio to script objects. Script the database, but change the "Advanced" selection to the Engine Type of "SQL Azure". Bing. Although most all T-SQL ports directly, one thing to keep in mind is that you need a Clustered Index on every table. Often the Primary Key (PK) is a good choice for that.

  Read the article

• New technical product guide for Sun Ray clients

  - by Jaap

  In the Oracle online documentation system a new Sun Ray clients Technical Product guide has been published. The document provides detailed information about the similarities and differences between the three Sun Ray client hardware models: Sun Ray 3, Sun Ray 3 plus and Sun Ray 3i. From the description of the Technical Product guide I want to quote the following section: "......Since Sun Ray 3 Series Clients have no local operating system and require no local management, they eliminate the complexity, expenses, and security vulnerabilities associated with other thin client and PC solutions. ......" This is always one of the great advantages of Sun Ray clients compared to other thin clients (which are actually low-fat PCs where you have to manage thin client OS images). The guide lists the features and technical specifications of the Sun Ray Client such as number of ports, chassis, graphics, network interfaces, power supply, operating conditions, MTBF, reliability, and other standards. The guide also contains a separate chapter about environmental data. As you may know, the Sun Ray 3 Series clients are designed specifically to be sensitive to a spectrum of environmental concerns and standards, from materials to manufacturing processes to shipping, operation, and end of life. The Sun Ray 3 Series clients complies to environmental standards and certifications such as Energy Star 5.0, EPEAT, WEEE and RoHS (see the Oracle policy for RoHS and REACH).

  Read the article

• BizTalk HL7 Receive Pipeline Exception

  - by Paul Petrov

  If you experience sequence of errors below with BizTalk HL7 MLLP receive ports you may need to request a hotfix from Microsoft. Knowledge base article number is 2454887 but it’s still not available on the KB site. The hotfix is recently released and you may need to open support ticket to get to it. It requires three other hotfixes installed: ·         970492 (DASM 3.7.502.2) ·         973909 (additional ACK codes) ·         981442 (Microsoft.solutions.btahl7.mllp.dll 3.7.509.2) If the exceptions below repeatedly appear in the event log you most likely would be helped by the hotfix: Fatal error encountered in 2XDasm. Exception information is Cannot access a disposed object. Object name: 'CEventingReadStream'. There was a failure executing the receive pipeline: "BTAHL72XPipelines.BTAHL72XReceivePipeline, BTAHL72XPipelines, Version=1.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "BTAHL7 2.X Disassembler" Receive Port: "ReceivePortName" URI: "IPAddress:portNumber" Reason: Cannot access a disposed object. Object name: 'CEventingReadStream'. The Messaging Engine received an error from transport adapter "MLLP" when notifying the adapter with the BatchComplete event. Reason "Object reference not set to an instance of an object." We’ve been through a lot of troubleshooting with Microsoft Product Support and they did a great job finding an issue and releasing a fix.

  Read the article

• Network really slow with TL-WN951N wireless card

  - by Sam

  I literally just installed ubuntu and it seems to be working great except the network is deadly slow. I'm running a TL-WN951N wireless card which can download at about 600-700 KB/s in windows but in Ubuntu the max speed it seems to get is around 5KB/s. I guess I should note that my WAP is only wireless-G but like I said, I can get much better speeds in Windows. I'm testing the speeds by downloading files from here: http://mirror.internode.on.net/pub/test/ Anyone have any idea? I saw some people recommend downloading drivers and compiling them myself but I'm really really new to all of this so would appreciate someone babying me through it so I don't brick my computer! Here are the results of lspci -v: 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) Subsystem: Giga-byte Technology GA-EP45-DS5 Motherboard Flags: bus master, fast devsel, latency 0, IRQ 44 I/O ports at c000 [size=256] Memory at e9110000 (64-bit, prefetchable) [size=4K] Memory at e9100000 (64-bit, prefetchable) [size=64K] [virtual] Expansion ROM at e9120000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8169 Kernel modules: r8169 05:02.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) Subsystem: Atheros Communications Inc. Device 3071 Flags: bus master, 66MHz, medium devsel, latency 168, IRQ 18 Memory at e9200000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• Help with IPTables - Masquerading + Forwarding, 1-to-1?

  - by Artiom Chilaru

  I've got a clean Ubuntu Server 10.10 with OpenSSH, OpenVPN and vsFTPd installed. The server is running as a VM on the Hyper-V server (hypervisor), has two network interfaces mapped to physical adapters (eth0 and eth1), and a virtual interface with a direct connection to the hypervisor (eth2). The VPN will create a tun0 interface when a client connects. What I want is the remote user, connecting over VPN to be able to connect to the hypervisor (all ports, ping etc). The initial idea was to make the VPN create a tap0 interface, and bridge eth2 to tap0, but this didn't work, unfortunately, as it seems that the adapters don't want to go into promiscuous mode (partially confirmed by MS) At the same time, both the hypervisor and the remove client over VPN can successfully ping/connect to the ubuntu server with no problems. So my plan right now is to try doing some 1-1 masquerading, if possible. Basically, I want every request sent from the VPN client to the ubuntu server to be redurected to the hypervisor instead (with IP translation ofc), and every request from the hypervisor to the ubuntu machine sent to the VPN client (IP translated too). Only 1 client will be connected at a time to the VPN, so I can force limit it to a single IP at all times, if necessary. Is this the right way to go, and if true, how can this be achieved? It's almost like a special case of port-forwarding, except every single port on tun0 is forwarded to a machine in eth2, and every port on the eth2 side forwards to an ip on tun0 I guess it could be done with iptables, but I'm rather new in linux, so I can't do it myself... help? :(

  Read the article

• Try out ubuntu on thinkpad x40 (via usb)?

  - by Oliver

  I am trying to try out ubuntu (i,e, install it within windows) on my thinkpad x40. I followed the instructions on how to create a bootable usb (http://www.ubuntu.com/download/ubuntu/download). No problem. The issue I have now is that th eusb ports on my x40 were burned before (common problem with the machine), i.e. do not work. So I got a USB notebook card from belkin. However it does not seem to recognize the usb stick from bios, thus I cannot boot from it. I also do not have a cd rom. Then tried to run wubi from the usb stick, briefly appears in task manager, no further action. So I tried it with wubi.exe, but same thing. Downloaded it to desktop, run it, briefly appears in the task manager under processes, no further action. Any one idea? I have enough memory and enough freed hd space. Thanks. Oliver

  Read the article

• Short Look at Frends Helium 2.0 Beta

  - by mipsen

  Pekka from Frends gave me the opportunity to have a look at the beta-version of their Helium 2.0. For all of you, who don't know the tool: Helium is a web-application that collects management-data from BizTalk which you usually have to tediously collect yourself, like performance-data (throttling, throughput (like completed Orchestrations/hour), other perfomance-counters) and data about the state of BTS-Applications and presents the data in clearly structured diagrams and overviews which (often) even allow drill-down.  Installing Helium 2 was quite easy. It comes as an msi-file which creates the web-application on IIS. Aditionally a windows-service is deployt which acts as an agent for sending alert-e-mails and collecting data. What I missed during installation was a link to the created web-app at the end, but the link can be found under Program Files/Frends... On the start-page Helium shows two sections: An overview about the BTS-Apps (Running?, suspended messages?) Basic perfomance-data You can drill-down into the BTS-Apps further, to see ReceiveLocations, Orchestrations and SendPorts. And then a very nice feature can be activated: You can set a monitor to each of the ports and/or orchestrations and have an e-mail sent when a threshold of executions/day or hour is not met. I think this is a great idea. The following screeshot shows the configuration of this option. Conclusion: Helium is a useful monitoring  tool for BTS-operations that might save a lot of time for collecting data, writing a tool yourself or documentation for the operations-staff where to find the data. Pros: Simple installation Most important data for BTS-operations in one place Monitor for alerts, if throughput is not met Nice Web-UI Reasonable price Cons: Additional Perormance-counters cannot be added Im am not sure when the final version is to be shipped, but you can see that on Frend's homepage soon, I guess... A trial version is available here

  Read the article

• Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

  - by Nic

  I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

  Read the article

• Playing Age of Empires II multiplayer in VirtualBox Over wi fi network

  - by Gaurav_Java

  I installed Age of Empires II (Expansion) in VirtualBox (hosting Windows XP). It works great in single player mode. Unfortunately, I tried playing multiplayer via WI-FI which I created on my Ubuntu machine and can't seem to join games. But when I connected to my WI-FI router other able to connect to my system and we can play multiplayer mode This is what I've done so far to try to resolve the issue: I noticed that the IP address of my virtual machine was 10.0.x.x, While the local IP on Ubuntu is 192.168.x.x, which I figured was a Problem. So I changed from NAT networking to bridged networking in VirtualBox . I turned off the Windows firewall in the virtual machine and don't have any ports blocked by Ubuntu, so no software firewall should be at fault. However I'm still unable to play multiplayer games, and suspect that some kind of networking issue lies at the heart of the problem. I'm not sure what else I would need to change, however. So essentially I was wondering if anyone else here has managed to play AOE2, or any similar game, inside VirtualBox from Ubuntu, and if so what you needed to do to make it possible. Or if anyone has suggestions on where else to look to figure out the problem, I'd appreciate that as well. Unfortunately AOE2 itself doesn't provide any debugging information to troubleshoot the inability to connect to network games. Here MY IP result both for Ubuntu and Virtualbox XP I want to play game on multiplayer mode in virtualbox on my system(Own Created on Ubuntu ) wi-fi on which other can connect and play hope someone will answer this

  Read the article

• Is knowledge of hacking mechanisms required for an MMO?

  - by Gabe

  Say I was planning on, in the future (not now! There is alot I need to learn first) looking to participating in a group project that was going to make a massively multiplayer online game (mmo), and my job would be the networking portion. I'm not that familiar with network programming (I've read a very basic book on PHP, MYSQL and I messed around a bit with WAMP). In the course of my studying of PHP and MYSQL, should I look into hacking? Hacking as in port scanning, router hacking, etc. In MMOs people are always trying to cheat, bots and such, but the worst scenario would be having someone hack the databases. This is just my conception of this, I really don't know. I do however understand networking fairly well, like subnetting/ports/IP's (local/global)/etc. In your professional opinion, (If you understand the topic, enlighten me) Should I learn about these things in order to counter the possibility of this happening? Also, out of the things I mentioned (port scanning, router hacking) Is there anything else that pertains to hacking that I should look into? I'm not too familiar with the malicious/Security aspects of Networking. And a note: I'm not some kid trying to learn how to hack. I just want to learn as much as possible before I go to college, and I really need to know if I need to study this or not.

  Read the article

• Configuring Transmission for faster download

  - by Luis Alvarado

  I have tested on the same PC with the same torrent/magnet links the following Torrent Clients: Transmission Ktorrent Deluge qBittorrent Vuze After 7 days of testing I noticed that the only one that took longer to start downloading and to keep an optimum/max download speed was Transmission. It was the slowest of them all to download the same torrents or magnet links which I tested 8 torrents and 4 magnet links from different sites and the one that took the most to start downloading or start after a pause/resume event. The other 4 just took less than 2 seconds for example to start downloading and to download the same content between 50% less time to 80% less time. I think that Transmission has the same capabilities about downloading/resuming than the other torrent clients but it may be because of some configuration I need to do to get the same speed and effect than the others. In my tests all torrent clients were tested with their default configurations. No changes were made. They were tested on the same PC, with the same network connection in the same time periods. So I am thinking that Transmission just needs a little bit of configuration tunning. I also set the ports for use to the same one for each. Checked the router for any blocking and anything related to the network. What options can I change to make it so Transmission resumes a download faster (grabs the seeds faster) and keeps a fast download all the time (Stays with the seeds that offer the best connection for example). Both of which by the look of it are features that the rest of the torrent clients do already.

  Read the article

• Why is my Wacom Intuos tablet not detected?

  - by mjwittering

  I need a little help trying to install a Wacom Intuos tablet, model number CTL-480/S. My installation of Ubuntu 13.04, 64bit, doesn't seem to be able to detect the device. I've tried an few different USB ports on my machine and get the same result. I believe there is an issue because when I open the System Settings app from the launcher and browse to the Wacom Tablet section under hardware, it reports that there is 'No table detected'. When I use lsusb I can see the device is detected: Bus 003 Device 004: ID 056a:030e Wacom Co., Ltd I've also pulled the following from the syslog: Oct 16 16:51:05 earth kernel: [ 7062.388031] usb 3-5: new full-speed USB device number 4 using ohci_hcd Oct 16 16:51:05 earth kernel: [ 7062.611038] usb 3-5: New USB device found, idVendor=056a, idProduct=030e Oct 16 16:51:05 earth kernel: [ 7062.611042] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Oct 16 16:51:05 earth kernel: [ 7062.611045] usb 3-5: Product: Intuos PS Oct 16 16:51:05 earth kernel: [ 7062.611047] usb 3-5: Manufacturer: Wacom Co.,Ltd. Oct 16 16:51:05 earth mtp-probe: checking bus 3, device 4: "/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5" Oct 16 16:51:05 earth mtp-probe: bus: 3, device: 4 was not an MTP device I'd really appreciate any suggestions to help debug and install this device.

  Read the article

• What would cause SSD to become not detectable?

  - by Balthazar

  I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

  Read the article

• RPi and Java Embedded GPIO: Using Java to read input

  - by hinkmond

  Now that we've learned about using Java code to control the output of the Raspberry Pi GPIO ports (by lighting up LEDs from a Java app on the RPi for now and noting in the future the same Java code can be used to drive industrial automation or medical equipment, etc.), let's move on to learn about reading input from the RPi GPIO using Java code. As before, we need to start out with the necessary hardware. For this exercise we will connect a Static Electricity Detector to the RPi GPIO port and read the value of that sensor using Java code. The circuit we'll use is from William J. Beaty and is described at this Web link. See: Static Electricity Detector He calls it an "Electric Charge" detector, which is a bit misleading. A Field Effect Transistor is subject to nearby electro-magnetic fields, such as a static charge on a nearby object, not really an electric charge. So, this sensor will detect static electricity (or ghosts if you are into paranormal activity ). Take a look at the circuit and in the next blog posts we'll step through how to connect it to the GPIO port of your RPi and then how to write Java code to access this fun sensor. Hinkmond

  Read the article

• make my Ubuntu 12.04 laptop visible on the network

  - by Andrew Boyd

  I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

  Read the article

• Cannot ping router with a static IP assigned?

  - by Uriah

  Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

  Read the article

• Fix 403 errors in Google Webmaster Tools

  - by Justin

  Hi Team, I have a domain that has "fallen off a cliff" for searches in Google. Searches that used to be in position 1-4 are now gone from page 1. The same search in Bing shows the typical position expected (top 5 results). In reviewing Google Webmaster Tools, I am seeing two problems: 1. The Sitemap is reporting two errors: General HTTP error: HTTP 403 error (Forbidden) URLs not accessible However, the URL they provide as "no accessible" is accessible. I can click the link Google provides and it works fine. There are 6,000 crawl errors of type 403. Again, most of these pages that have 403 are accessible in my browser (tried various browsers as well). About half are from January, the other half from November. There are no IP-specific firewall rules on ports 80 and 443 that could block the goolgebot Using the user agent switcher add-on for FF I confirmed that the page loads when the user agent is the googlebot I an confirm that most of the pages reported as 403 are accessible. A search of just "site:thedomain.com" does confirm there are over 9,000 in the index. But most searches don't return the site. I believe the 403 issues are the cause of the fall in search rankings, but I can't seem to find any information online with ideas about how to address this. Any ideas? jpe

  Read the article

• What ufw allows/denies by default?

  - by mgibsonbr

  I was accessing a server running Ubuntu 12.04 Server using SSH and managed to lock myself out of it. I'm still wondering how that happened: The firewall was enabled by default; sudo ufw status did not show any rules (but I could SSH to the server normally); I tried explicitly allowing ports 80 and 443 using the commands: sudo ufw allow 80 sudo ufw allow 443 sudo ufw status now showed something like: Status: active To Action From -- ------ ---- 80 ALLOW Anywhere 80 ALLOW Anywhere (v6) 443 ALLOW Anywhere 443 ALLOW Anywhere (v6) (Recalling from memory and seeing some examples; I can't access the server to see the exact output, so I might be mistaken) After logging out of SSH, now I can't log in anymore (connection timeout). What just happened? There were no DENY rules previously (AFAIK), neither I introduced any. How could SSH be previously available and now it's not? Does ufw (or more precisely iptables) allow everything by default, unless you explicitly allow something, then it denies everything by default? Or did I do something wrong, that broke the existing rules somehow?

  Read the article

• My card reader doesn't show up at all, but previously did in 10.10

  - by Nathan J. Brauer

  I bought a pin-based-USB powered internal media card reader and it worked perfectly when I first installed Ubuntu 10.10 a month ago. I used it a few times since and today I booted up the computer and it's not working. Here's how it used to work: In nautilus->computer, 5 "drives" would display even when no card was inserted. One for each slot (SD, XD, CF/MS, etc). Opening one w/o a card would initiate a "Please insert card." dialog. Inserting a card would automatically open nautilus. Now: No drives display at all whether cards are inserted or not. lsusb lists the following (which seems to indicate that it's not being detected) Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 002: ID 046d:c52e Logitech, Inc. (my keyboard/mouse) Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub (A side note, all of my USB ports are 2.0 + 1 USB port which is 3.0, why does everything say 1.1/2.0?) I tried using ubuntu-bug but for USB devices it expects you to be able to remove and insert them while the computer is running -- obviously something you probably shouldn't be doing when you're dealing with devices plugged straight into the USB pins. Thanks in advance!

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >