Search Results

Search found 3195 results on 128 pages for 'tip and tricks'.

Page 86/128 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• libgdx collision detection / bounding the object

  - by johnny-b

  i am trying to get collision detection so i am drawing a red rectangle to see if it is working, and when i do the code below in the update method. to check if it is going to work. the position is not in the right place. the red rectangle starts from the middle and not at the x and y point?Huh so it draws it wrong. i also have a getter method so nothing wrong there. bullet.set(getX(), getY(), getOriginX(), getOriginY()); this is for the render shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.rect(bullet.getX(), bullet.getY(), bullet.getOriginX(), bullet.getOriginY(), 15, 5, bullet.getRotation()); shapeRenderer.end(); i have tried to do it with a circle but the circle draws in the middle and i want it to be at the tip of the bullet. at the front of the bullet. x, y point. boundingCircle.set(getX() + getOriginX(), getY() + getOriginY(), 4.0f); shapeRenderer.begin(ShapeType.Filled); shapeRenderer.setColor(Color.RED); shapeRenderer.circle(bullet.getBoundingCircle().x, bullet.getBoundingCircle().y, bullet.getBoundingCircle().radius); shapeRenderer.end(); thank you need it to be of the x and y as the bullet is in the middle of the sprite when drawn originally via paint.

  Read the article

• Update usb Driver

  - by Enrico Caponi

  i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

  Read the article

• crippling repeating "pciehp card not present" notifications

  - by Nanne

  When using ubuntu (12.04, both installed and on a live usb) I get a lot of these messages: pciehp 0000:00:1c.5:pcie04: Card not present on Slot(37) pciehp 0000:00:1c.5:pcie04: Card present on Slot(37) And with a lot I mean about 20 per second. This has a crippling effect, and I would like to get rid of it :) The computer is a packard bell easynote BG48-U-100 DC. I tip I picked up from some fedora/redhat error here was to look at lspci -vnn. I have pasted the part about "00:1c.5" here: http://pastebin.com/0sfsiqW2 For what good it may do, here is the lsmod of my machine: http://pastebin.com/DQZy1kAL From that first pastebin I think to conclude that it has to do with the module shpchp, which seems to me (aka: google) to have something to do with ACPI. That's as far as I've come in disecting this. Can anyone help me along further? What can I do, check etc? I did see this topic but my intentions are not to surpress the error message: I know how to do this (from that topic ;) ), but I'm looking for a real sollution. Finding the problem on the internet does suspect me to believe it is neither an ubuntu specific nor a packard-bell specific problem.If you google the problem it seems that is present on several other distribution/hardware combo's as well, and it looks like the advice is to remove one of the drivers? I have no clue as to which driver I should look at and and what would be the effect of just removing it. I have seen this topic which is old-ish, but describes my problem and is about a similar computer. The solution in this topic was to compile a new kernel using a spanish guide, which seems a bit extreme to me, so I'm kinda hoping for a better solution than that.

  Read the article

• Raspberry Pi, Time Capsule Progress

  - by Richard Jones

  So by way of an update. I thought all was good with my Raspberry Pi, Debian and Netatalk Apple Time Capsule Clone. However something very strange going on. Although I could backup my Mac's + PC's fine to Raspberry Pi with external USB HD; strangely with RPI running, I couldn't use AirPlay. I found myself unable to play anything from Mac to Apple TV. So after lots of trying to make this work, I about turned and finally went out and got myself a 2TB Apple Time Capsule. More cash than I would want to spend on anything like this, but Apple you got me. I would like to offer a top tip, which maybe goes a small way to justifying silly expenditure... You can easily add a USB HD to any Time Capsule. I've just added a 3 TB external USB HD, giving me a 5 TB of total backup grunt. 3 TB External USB HD, was peanuts by comparison to Apple kit. So all working, its all solid as you'd expect.Apple 2, maybe me .5. But strong, solid backups now happening, without hassle (but a bit of a credit card bill to follow)

  Read the article

• Windows 8 Store App Crash Logs

  - by David Paquette

  I was recently working on a Windows 8 app, and the application was crashing occasionally.  When resuming the application, the app would crash and close immediately without providing any feedback or information on what went wrong.  The crash was very difficult to reproduce, and I could never get the crash to occur when I was debugging through Visual Studio.  My app was crashing, and I had no idea what was going wrong!  HELP!!! After doing some digging, I found that when a Windows 8 Store App crashes, an error is logged in Windows Administrative Events.  You can view the details of any app crash by launching the Event Viewer and selecting Administrative Events under Custom Views.  The Source of the error will be listed as AppHost.  AppHost is the process that runs your Windows 8 Store App.  The error details contain all the information you would expect to find, including a stack trace and line numbers.   Windows 8 Tip:  A shortcut for launching the Event Viewer in Windows 8.  Right click on the bottom left corner of your desktop (where you normally click to go to the Start Screen).  A menu will appear with shortcuts to a number of common system tasks such as Event Viewer, Task Manager, Command Prompt, and Device Manager.

  Read the article

• How to alter image pixels of a wild life bird?

  - by NoobScratcher

  Hello so I was hoping someone knew how to move or change color and position actual image pixels and could explain and show the code to do so. I know how to write pixels on a surface or screen-surface usigned int *ptr = static_cast <unsigned int *> (screen-pixels); int offset = y * (screen->pitch / sizeof(unsigned int)); ptr[offset + x] = color; But I don't know how to alter or manipulate a image pixel of a png image my thoughts on this was How do I get the values and locations of pixels and what do I have to write to make it happen? Then how do I actually change the values or locations of those gotten pixels and how do I make that happen? any ideas tip suggestions are also welcome! int main(int argc , char *argv[]) { SDL_Surface *Screen = SDL_SetVideoMode(640,480,32,SDL_SWSURFACE); SDL_Surface *Image; Image = IMG_Load("image.png"); bool done = false; SDL_Event event; while(!done) { SDL_FillRect(Screen,NULL,(0,0,0)); SDL_BlitSurface(Image,NULL,Screen,NULL); while(SDL_PollEvent(&event)) { switch(event.type) { case SDL_QUIT: return 0; break; } } SDL_Flip(Screen); } return 0; }

  Read the article

• To sell or give for free

  - by QAH

  Hello everyone! I am currently making a game that I was originally planning to sell. It is a simple 2D arcade style game for the PC. I've seen many indie games become popular and generate revenue from advertisements, but the game itself remains free. I need some advice on whether or not I should sell my game, release it for free with advertisements, or ask for donations and keep the game free. I feel that my game is fun, but of course the graphics aren't tip top because I am a programmer, not an artist. I just take screenshots of 3D models I get from Turbosquid and crop around it to make a sprite. Also, and I could be very wrong about this, it seems that there are more legal issues surrounding selling a game than making it free and generating revenue from advertisement, or asking for donations. If I am wrong, someone please correct me. Also, I am very interested in generating some revenue for my work, but that isn't at the very top of my list. I am in my last year of high school, soon to be going to college, and I am going to major in computer science/software engineering. So I am trying to gain some preliminary experience at home by coding stuff every day. One way of getting this experience is by making this game. So what do you think? What route should I take? What has worked well with other indie games? Thanks in advance.

  Read the article

• View the Time & Date in Chrome When Hiding Your Taskbar

  - by Asian Angel

  Do you prefer keeping your Taskbar hidden but still need to keep watch on what time it is? Now you can keep track of the time without the Taskbar using the Date Today extension for Google Chrome. A Look at Date Today with Different Themes This extension does one thing and does it well…it provides you with an “active icon” clock that will let you view the time and date in two fashions. The first is by hovering your mouse over the “Toolbar Clock Button”… And the second is by clicking on the “Toolbar Clock Button” to view an enlarged version. Here you can see the extension in use with five different themes to get an idea of how it might look with the theme that you are currently using. It does stand out very nicely with brighter or darker colored themes. Conclusion While this extension is obviously not for everyone it will make a nice (and useful) addition to Chrome for those who prefer keeping their Taskbar hidden. Links Download the Date Today extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Set the Date and Time on SolarisView Browser History Based on Host & Date in ChromeQuick Tip: Set a Future Date for a Post in WordPressFuture Date a Post in Windows Live WriterSave Screen Space by Hiding the Bookmarks Toolbar in Safari for Windows TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Discovery Channel LIFE Theme (Win7) Increase the size of Taskbar Previews (Win 7) Scan your PC for nasties with Panda ActiveScan CleanMem – Memory Cleaner AceStock – The Personal Stock Monitor Add Multiple Tabs to Office Programs

  Read the article

• Cry Engine 3 vs UDK

  - by Daniele Riccardelli

  I'm new here and I hope that other people may find this question interesting. Me and a bunch of guys from my University are thinking about getting started in game development, but, even though the game design is kind of ready, we are stucked at the point "which Engine should we choose". At first, we were thinking about Unity3D Free, in particular because we are pretty familiar with C# and, even better, it's completely free, but on the other hand there are some cons like no dynamic shadowing that make the realization of our game kinda hard. So, we are thinking about moving either to UDK or Cry Engine, since they are not as expensive as Unity3D Pro (at least before the game deployment) . The thing we are worried the most, though, is that we are kind of scared about the support for team work(i mean, that we might find it hard to coordinate our efforts without software support), since in Unity3D the team features are part of purchasable content, and we are not interested in paying that much for a project we are not even sure we can complete. So, finally, I hope one of you knows the mentioned engines enough to give us a tip telling which one offers better team features and is advisable for guys that have barely worked before on videogames but have good object oriented programming skills. Probably might be helpful for your suggestion, if i say that our game is an exploration game. Thanks to anybody who's going to answer.

  Read the article

• Opengl + SDL linking error

  - by me2loveit2

  I am trying to load an image as a texture with opengl using c++ in visual studio 2010. I researched a couple hours online and found the SDL library, then I implemented a simple example and got some linking error I can not seem to figure out. The error log is here: 1Build started 10/20/2012 12:09:17 AM. 1InitializeBuildStatus: 1 Touching "Debug\texture mapping test.unsuccessfulbuild". 1ClCompile: 1 All outputs are up-to-date. 1 texture mapping test.cpp 1ManifestResourceCompile: 1 All outputs are up-to-date. 1texture mapping test.obj : error LNK2019: unresolved external symbol _IMG_Load referenced in function "void __cdecl display(void)" (?display@@YAXXZ) 1MSVCRTD.lib(crtexe.obj) : error LNK2019: unresolved external symbol main referenced in function __tmainCRTStartup 1C:\Users\Me\Documents\Visual Studio 2010\Projects\Programming projects\texture mapping test\Debug\texture mapping test.exe : fatal error LNK1120: 2 unresolved externals 1 1Build FAILED. 1 1Time Elapsed 00:00:02.45 ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== Can someone please help me!! I am at a desperate point right now. I downloaded the SDL, and copied all the .h file into: C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Include I added the .lib (x86) files into://as a not i tried the (x64) file too but got the exact same error C:\Program Files (x86)\Microsoft SDKs\Windows\v7.0A\Lib and the .dll(x86) into: C:\Windows\System32 For implementing textures, I used the simple sample code from: http://www.sdltutorials.com/sdl-tip-sdl-surface-to-opengl-texture Please let me know if you can see me doing something wrong, or know how I can fix this!! Thanks Phil

  Read the article

• Ubuntu 12.10 Unity & Gnome Shell problems

  - by user109292

  I'm experiencing some problems since I decided to upgrade Ubuntu to 12.10 version two days ago. Firstly, I cannot select the Unity environment I previously used on 12.04 without opening the terminal with Ctrl+Alt+T and typing setsid unity. When I select the Unity environment on the account page when I start the computer, it automatically switch back to Gnome and launch my session. I tried to set back Unity using the setsid unity tip, and it worked fine. But after few minutes, everything freeze and I cannot control anything anymore. The only option left is to press the Power button of my Asus EeePC and switch everything off. Question 1 : What can I do to get my Unity environment back on 12.10 from the start, without using the terminal every time? What should I do to prevent the all system to freeze once done? Secondly, and since I cannot use Unity for new, I'm using an other interface, GNOME Shell. What's bothering me is that the Activities bar (let's call it like that, 'cause I don't know the proper name) and the Internet bar (or any bar from any other window) cannot merge into one another, reducing the display of the screen I'm actually using to peanuts! Question 2 : Is there a way to merge those two bars? Or is there a way to hide the Activities bar when I'm not using it like on Unity environment?

  Read the article

• Rendering a DOM across multiple displays

  - by meetamit

  I'm building a data-driven animation with HTML and javascript to run in a web browser. I would like to display it tiled across three 1080p monitors. This essentially yields a viewport that's 5760px wide and 1080px tall. Pretty large. Does anyone have experience setting up something like this? I have many questions below, but any tip would be appreciated: Is it reasonable to expect a DOM to render into such a large viewport size at close to 60fps? I might choose to use canvas, instead of SVG or HTML, but that would yield a giant canvas. Can a canvas with such high resolution be performant? Of course everything depends on the complexity of the graphics I want to render, but I'm looking to remove that factor from this question, so assume I'm asking about a canvas animation that can run at 60fps at 1920x1080 resolution. Would it run roughly as fast at 3 times the width? Would three.js and WebGL be a more proper approach at that resolution? How do you actually cause Chrome or FF to span 3 monitors at full screen? Do I need a 3rd party solution of any kind? Thanks!

  Read the article

• Algorithm to zoom a plotted function

  - by astinx

  I'm making a game in android and I need plot a function, my algorithm is this: @Override protected void onDraw(Canvas canvas) { float e = 0.5f; //from -x axis to +x evaluate f(x) for (float x = -z(canvas.getWidth()); x < z(canvas.getWidth()); x+=e) { float x1,y1; x1 = x; y1 = f(x); canvas.drawPoint((canvas.getWidth()/2)+x1, (canvas.getHeight()/2)-y1, paintWhite); } super.onDraw(canvas); } This is how it works. If my function is, for example f(x)=x^2, then z(x) is sqrt(x). I evaluate each point between -z(x) to z(x) and then I draw them. As you can see I use the half of the size of the screen to put the function in the middle of the screen. The problem isn't that the code isn't working, actually plots the function. But if the screen is of 320*480 then this function will be really tiny like in the image below. My question is: how can I change this algorithm to scale the function?. BTW what I'm really wanting to do is trace a route to later display an animated sprite, so actually scale this image doesnt gonna help me. I need change the algorithm in order to draw the same interval but in a larger space. Any tip helps, thanks! Current working result Desired result UPDATE: I will try explain more in detail what the problem is. Given this interval [-15...15] (-z(x) to z(x)) I need divide this points in a bigger interval [-320...320] (-x to x). For example, when you use some plotting software like this one. Although the div where is contain the function has 640 px of width, you dont see that the interval is from -320 to 320, you see that the interval is from -6 to 6. How can I achieve this?

  Read the article

• JavaFX: Use a Screen with your Scene!

  - by user12610255

  Here's a handy tip for sizing your application. You can use the javafx.stage.Screen class to obtain the width and height of the user's screen, and then use those same dimensions when sizing your scene. The following code modifies default "Hello World" application that appears when you create a new JavaFX project in NetBeans. package screendemo; import javafx.application.Application; import javafx.event.ActionEvent; import javafx.event.EventHandler; import javafx.scene.Group; import javafx.scene.Scene; import javafx.scene.control.Button; import javafx.stage.Stage; import javafx.stage.Screen; import javafx.geometry.Rectangle2D; public class ScreenDemo extends Application { public static void main(String[] args) { Application.launch(args); } @Override public void start(Stage primaryStage) { primaryStage.setTitle("Hello World"); Group root = new Group(); Rectangle2D screenBounds = Screen.getPrimary().getVisualBounds(); Scene scene = new Scene(root, screenBounds.getWidth(), screenBounds.getHeight()); Button btn = new Button(); btn.setLayoutX(100); btn.setLayoutY(80); btn.setText("Hello World"); btn.setOnAction(new EventHandler() { public void handle(ActionEvent event) { System.out.println("Hello World"); } }); root.getChildren().add(btn); primaryStage.setScene(scene); primaryStage.show(); } } Running this program will set the Stage boundaries to visible bounds of the main screen. -- Scott Hommel

  Read the article

• JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

  - by John-Brown.Evans

  JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list.   Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms  and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows:   <foreign-server name="AqJmsForeignServer">         <default-targeting-enabled>true</default-targeting-enabled>         <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>         <jndi-property>           <key> datasource </key>           <value> jdbc/aqjmsuserDataSource </value>         </jndi-property>   </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is   XAQueueConnectionFactory  because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory  into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

  Read the article

• CodePlex Daily Summary for Monday, December 13, 2010

  CodePlex Daily Summary for Monday, December 13, 2010Popular ReleasesRequest Tracker Data Access: 1.0.0.0: First releaseMicrosoft All-In-One Code Framework: All-In-One Code Framework 2010-12-13: Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for ASP.NET Name Description Owner CSASPNETCMD Run batch/cmd from ASP.NET (C#) YiXiang VBASPNETCMD Run batch/cmd from ASP.NET (VB) YiXiang VBASPNETAJAXWebChat Ajax web chat application (VB) JerryWeng CSASPNETAJAXWebChat Ajax web chat application (C#) JerryWeng CSASPNETCurrentOnlineUserList Get current online u...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...SQL Server PowerShell Extensions: 2.3.1 Production: Release 2.3.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 12 modules with 155 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.EnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...New Projects.NET Tips Repository: This project is the source code repository for all the projects, samples, and tutorials posted at vahidnasiri.blogspot.com. Its main focus is on .NET programming.a hash implement by basic array and link list: a hash implement by basic array and link listApplication Essentials for WPF, Silverlight, and Windows Phone 7: Application essentials is a simplified, small footprint redux of the Structured MVVM and Color Blending projects and is used to build WPF, Silverlight, and Windows Phone 7 applications with an MVVM architecture.Bit.ly Button: Bit.ly Button lets you use the power of Bit.ly bookmarklet to shorten any webpage (especially on sites like Facebook and Twitter). It's like a sharing button, except it will shorten the link before you share on Facebook or Twitter.Check Dependency: Check Dependency is designed to identify the dependency problems in assemblies. It is a valuable assistant to a project hat has complex dependency in many assemblies.Circo: A product oriented towards the need of having a powerful tool improving the construction process of applications. User interface for creating Entity Dictionary, generating .Net classes and also SQL model. It provides a strong productivity oriented.CoralCubeDB: This is the db for coralcube.Dotnet.Samples: Microsoft® .NET™ sample projects Created by Nano Taboada under a MIT License All projects have been coded using Microsoft(R) Visual Studio(R) 2010 mostly targeting framework version 4.0 Get a free copy of Visual C# 2010 Express at http://tinyurl.com/visualstudio2010expressElasticity: An library implementation of the Scheduler-Agent-Supervisor pattern. http://vasters.com/clemensv/2010/09/28/Cloud+Architecture+The+SchedulerAgentSupervisor+Pattern.aspxFacebook Graph Toolkit: get Graph API in ASP.NET.Grabbers: An object relational library and code generator designed to assist agile development teams generate data aware objects. InSimSniffer: InSimSniffer is a InSim packet sniffer for the racing simulator Live for Speed. It allows programmers to view and debug packets sent by the game.Irrlicht Wrapper for D: A D wrapper for the Irrlicht game engine generated by SWIG.Linq to LDAP: Linq provider built on top of System.DirectoryServices.Protocols for querying LDAP servers.ME Video Player: ME Video Player makes it easier for web developers to present medis on web pages. It's developed in C# and Silverlight by Mahyar Esteki.Mladi.com.hr: CMS system for croatian youth portalMouse Practise: A small project that creates a game to train a beginner to use mouse. Developer's Blog : http://shekhar-pro.blogspot.com Follow on Twitter : http://twitter.com/samajshekharMVVMKit: MVVMKit makes it easier to create WPF applications using the MVVM pattern.mygully-searcher: MyGully-Searcher makes it easier for Mygully-Forum-Users to search the forums for downloads. You'll no longer have to click to all forums. It's developed in VB.Net.NBooks Accounting: A simple clone to Quickbooks.Projeto Teste do curso de Pós graduação em Engenharia de Software.: Projeto teste do curso de pós graduação em Engenharia de Software. Códigos exemplos em Javascript e outros. Nayanne Araújo Bonifácio.Razor Reports - a Visualizer for the DotNetNuke Reports Module: Razor Reports is a Visualizer for the DotNetNuke Reports ModuleSiteGrabber: Groepsopdracht 2Supermarket: Hat: tTheSharePage: Project contains the core library for use in my website that i am developing for my NIIT project work. (The website will integrate facebook and twitter in a single website) The library features full custom developed facebook and twitter sdk library that can even be reused.Tip Of Day SharePoint WebPart: Tip Of Day webpartTranslit Hebrew to Russian: Application, which can translit Hebrew text into Russian.WP7 Thai Text Input: WP7 Thai text input makes it possible to enter Thai characters in WP7. It's developed in C# and were used in some of the CoreSharp's WP7 apps.

  Read the article

• CodePlex Daily Summary for Saturday, November 20, 2010

  CodePlex Daily Summary for Saturday, November 20, 2010Popular ReleasesMiniTwitter: 1.59: MiniTwitter 1.59 ???? ?? User Streams ????????????????? ?? ?????????????? ???????? ?????????????Home Access Plus+: v5.4.4: Version 5.4.4Change Log: Added logic to the My Computer Browsers to allow for users with no home directories (set in ad anyhow) Renamed the My School Computer Enhanced page to My School Computer Extended Edition File Changes: ~/bin/hap.web.dll ~/mycomputersl.aspxWatchersNET.SiteMap: WatchersNET.SiteMap 01.03.01: Whats NewNew Setting for the Skin Object <param name="InclusionTabs" value="10,20,40" /> - Specify the Tab Id of the Tab(s) you want to Include the SiteMap. Separated by Comma changes Code Cleanup.NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.01: Added new extensions for - object.CountLoopsToNull Added new extensions for DateTime: - DateTime.IsWeekend - DateTime.AddWeeks Added new extensions for string: - string.Repeat - string.IsNumeric - string.ExtractDigits - string.ConcatWith - string.ToGuid - string.ToGuidSave Added new extensions for Exception: - Exception.GetOriginalException Added new extensions for Stream: - Stream.Write (overload) And other new methods ... Release as of dotnetpro 01/2011Code Sample from Microsoft: Visual Studio 2010 Code Samples 2010-11-19: Code samples for Visual Studio 2010Prism Training Kit: Prism Training Kit 4.0: Release NotesThis is an updated version of the Prism training Kit that targets Prism 4.0 and added labs for some of the new features of Prism 4.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication MEF Navigation Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2...Free language translator and file converter: Free Language Translator 2.2: Starting with version 2.0, the translator encountered a major redesign that uses MEF based plugins and .net 4.0. I've also fixed some bugs and added support for translating subtitles that can show up in video media players. Version 2.1 shows the context menu 'Translate' in Windows Explorer on right click. Version 2.2 has links to start the media file with its associated subtitle. Download the zip file and expand it in a temporary location on your local disk. At a minimum , you should uninstal...Physics Helper for Blend, Silverlight, WP7 and Farseer: PhysicsHelper 4.0.0.1 Beta: This is a beta release of the Physics Helper 4.0 targeting Silverlight 4 and Windows Phone 7 and using the Farseer 3.0 Physics Engine (http://farseerphysics.codeplex.com). The download is an installer which will install the Behaviors into Blend 4's Behaviors list in the Assets Panel. Please see the Home page for details on this releaseLateBindingApi.Excel: LateBindingApi.Excel Release 0.7d: Release+Samples V0.7: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, Pictures, 3D-Effects Example05 - Charts Example06 - Dialoge in Excel Example07 - Einem Workbook VBA Code hinzufügen Example08 - Events Example09 - Eigene Gui Elemente erstellen und Ere...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.4 Released: Hi, Today we are releasing Visifire 3.6.4 with few bug fixes: * Multi-line Labels were getting clipped while exploding last DataPoint in Funnel and Pyramid chart. * ClosestPlotDistance property in Axis was not behaving as expected. * In DateTime Axis, Chart threw exception on mouse click over PlotArea if there were no DataPoints present in Chart. * ToolTip was not disappearing while changing the DataSource property of the DataSeries at real-time. * Chart threw exception ...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesAutoLoL: AutoLoL v1.4.2: Added support for more clients (French and Russian) Settings are now stored sepperatly for each user on a computer Auto Login is much faster now Auto Login detects and handles caps lock state properly nowTailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.9: Contains a number of bug fixes and additional tutorial steps as well as complete database implementation details.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.3 and demos: It contains a rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form and Pager tested on mozilla, safari, chrome, opera, ie 9b/8/7/6 new stuff in 1.3 Autocomplete helper Autocomplete and AjaxDropdown can have parentId and be filled with data depending on the value of the parent PopupForm besides Content("ok") on success can also return J...New ProjectsAccessReporter: This is a project created for CIS601 to display reports based on the Access database extract fro the SAP simulation game.ASP.NET Dynamic Data Layout: Dynamic Data Layout is a library for ASP.NET WebForms that extends the ASP.NET Dynamic Data functionality. It allows you to create complex forms where you can easily define the layout, use tabs, multiple columns, advanced styling etc. And all this without entity templates!Brascomex: Repositório para controle de versão dos dados da Brascomex.Business Advancer: this is a simple web site projectCarrito de Compras: Proyecto de desarrollo de software a gran escalaclinicanet: Descrição em construçãoCrazyBeavers.Geodesy: A library written in C#/.Net 2.0 to transform between geodetic and grid coordinates (using the GauusKreuger algorithm) as well as calculating distances and direction between a set of coordinates.CSTS Work Space: CSTSWSCup of Tea: Project to quickstart work on several platforms.Delete Bin, Obj, Backup directories: This utility deletes bin and obj directories recursively (under a specified root directory). It can also delete psess files and files larger than a specific file size. Single-pass, auto-delete multiple bin, obj, and backup directories. Developer Guidance - Onboarding Windows Phone 7: The Developer Guidance for Windows Phone 7 includes end-to-end application scenarios, code examples, documentation, and best practices.EncryptConfig: EncryptConfig is a simple form application that encrypts app config connection strings for deployment in non-secure environments. EncryptConfig will also decrypt the app config file in case you need to update the connection string information.Graphic MUD: My personal MUD project.lcsunit: Lightweight C# Unit Test Framework. Keep unit testing as simple as possible. Features: * only 1 source file * Assert, AssertEqual support Embed in your code, no XML, no GUI or separate console runnersLightweight Accounting System: Nothing yetLog4Net Demo for Enterprise Applications: Single class which is useful for logging logs into database, file etc. It also sends an emails about the errors. All these can be done using configuration. Very useful to log information in a file and/or in a database within a business class. MapWinGIS ActiveX Map and GIS Component: MapWinGIS.ocx is a C++ based geographic information system programming ActiveX Control and application programmer interface (API) that can be added to a Windows Form in Visual Basic, C#, Delphi, or other languages that support ActiveX, providing your app with a map.nau: nau cmsnewhxbProject: Something about my project.NTypeClasses: This project is an attempt to bring type class feature to .NETPhoto Stream: Need to add it laterSharePoint 2010 Workflow History List: This project hosts a customized version of the Workflow History List for SharePoint 2010. The Description column on this list can handle messages up to 1024 characters.Silverlight Organization Chart: A Silverlight organization ChartSlovníkár: Cílem projektu je vytvorit aplikaci pro PC a PDA, postavenou na platforme Microsoft .NET Framework. Hlavní funkcí aplikace bude vyhledávání v dvojjazycných prekladových slovnících (databázích), predevším ve formátu UDN. S aplikací bude distribuováno 18 slovníku.The Letters Are Falling!: The Letters Are Falling is a XAML project for three year olds. No, I mean the GAME is for three year olds. The project is a prototype I am building to see about incorporating XAML into VB for Dummies. The game is to help learning your alphabet!Tip Calc for Windows Phone 7: Tip Calc makes it easier for Windows Phone users to calculate tips. . It's developed in C# + Silverlight for WP7.Universities managment information system: Universities managment information systemUsersMOSS: UsersMOSS est une petite application permettant de consulter sur un serveur MOSS les sites web (SPWeb) les users (SPUser), et les groupes (SPGroup). Cette application utilise le modèle objet de MOSS pour inspecter le contenu des objets d'un serveur MOSS. Cette application est loin d'être professionnelle, ou même terminée, mais elle me rend très souvent service. Surtout ne l'utilisez pas sur un serveur de production car le gestion du GC n'est pas faite, ce qui peut provoquer des plantages de v...Windows 7 To Go: Windows 7 Beispielanwendungen, Apps, Videos, Präsentationen und Anleitungen Eine Bibliothek mit Demos, Sourcecodes, Präsentationen und Videos für das Demonstrieren, Verwenden und Erlernen von Windows 7 Features.

  Read the article

• .htaccess - Remove all cookies

  - by BlaM

  I want to make an existing domain a "CDN" domain that serves all images, CSS and JS files (i.e. static files). However that domain was parked earlier and some application on that domain has set cookies. As far as I can observe, I'd say that with cookies the "Expires" header doesn't seem to have much effect with some browsers (Including Firefox). The browsers still request the file, even if they shouldn't do so for the next month. It would be possible to do some mod_rewrite tricks to detect if there are any cookies and then call a PHP file to remove the cookies and serve the static file so that for the next call there aren't any cookies left, but maybe you can give me a simpler method: Is there a "Apache .htaccess only" way of removing all existing cookies?

  Read the article

• OSX: Undeletable files

  - by geoffjentry

  So via what I suspect is a cron'd rsync gone awry, I noticed that I have ~25000 variants of .DS_Store in a directory that's on an external disk, they're named "..DS_Store.FOO" where FOO varies. The problem is that I can seem to delete them, even using the various tricks I've seen over the years for removing files with oddball names. No problem, I said - I moved all of the real files into another directory and then just tried to do an 'rm -r' on the original directory ... no luck, it fails to delete those files and says directory not empty. Tried it again with 'rm -rf' and still no luck. I have no idea how to get rid of this thing, does anyone have any idea?

  Read the article

• Rerouting traffic from port 80 to another port on a single ip

  - by zam

  I have a server with multiple IP addresses associated with it. I'm trying to run a node.js web server (which I do not want to run as root), using only one of those ip addresses (it would be very bad if the traffic from all the ip addresses were forwarded). Through searching superuser, it looked like this could be possible with iptables: How to setting up iptables for traffic fowarding on port 80 from specific sources iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 --source 212.333.111.222 -j REDIRECT --to-port 9020 However, I do not understand why eth0 is needed. According to: http://blog.softlayer.com/2011/iptables-tips-and-tricks-port-redirection/ this could be done with: iptables -t nat -A PREROUTING -p tcp --dport 2525 -j REDIRECT --to-ports 25 What is the correct way of forwarding traffic from a single ip on port 80, lets say 111.111.111.111:80 to another port on the same server, lets say 111.111.111.111:8765? thanks for your help!

  Read the article

• Unable to logoff, disconnect, or reset terminal server user in production environment

  - by l0c0b0x

  I'm looking for some ideas on how to disconnect, logoff, or reset a user's session in a 2008 Terminal Server (unable to login as the user either as it is completely locked-up). This is a production environment, so rebooting the server or doing something system-wide is out of the question for now. Any Powershell tricks to help us with this? We've tried killing the session's processes too, directly from the same terminal server (from the task manager, Terminal Services Manager and the Resource Monitor) with no results. Help!

  Read the article

• How can I speed up my Windows Server 2008 VPN Connection?

  - by Pure.Krome

  So I've installed VPN service that comes with Windows Server 2008. Works perfectly, etc. When a client remote desktops to one of the private servers at the office, via VPN .. it's pretty slow. Now - how long is a piece of string? So before I get all the obligatory checks, I'll list the things from Mr. Obvious: Our modem/router (fritz!box) has a data/graph that shows incoming and outbound bandwidth. Both directions are barely getting used when a client has RDP'd via VPN. Our office internet connection is running at 21,9 Mbit/s download 1,3 Mbit/s upload. I feel like it's maxing at .. modem speeds ?? Is there any tricks I can do to confirm this and possibly even fix this?

  Read the article

• How should one manager external and internal DNS servers at the same time?

  - by erotsppa

  We run a mac network here in the office. We have an internal DNS server to manage the network. Everything is resolved to a local ip (for mail.mydomain.com etc). However, we also have an external DNS server for when our users are not in the office. However, isn't it a pain to have to manage two lists? Whenever you change something you have to change another? And you can't have one be a slave of another because the ip are sometimes different (for example mail.mydomain.com would point to a local ip in local dns server but an external ip in the external dns server). Any tricks?

  Read the article

• Wiping out user and/or root password in embedded linux

  - by TryTryAgain

  We have a security camera system running an embedded linux. It boots with Lilo as a bootloader and has no tty access once booted. I don't know any username either. SSH/22 is open, but I don't think brute force is an option. I have tried all the common tricks to reset a linux user password (boot from the bootloader in single user mode = doesn't happen, still prompts for user login, boot to a live cd = can't access the file system...it's all loop files and other binary, etc etc), but they are all not possible as it is an embedded linux setup the way it is. Any help/suggestions would be appreciated. Thanks

  Read the article

• DNS: domain2 points to domain1

  - by Yar

  I have one domain ("domain1") that is set up with hosting and mail (hosted by Gmail Apps). This domain works perfectly. I want a second domain ("domain2") to forward to domain1, but I don't want to use "DNS Forwarding." I would like to have it act EXACTLY like domain1, so that domain2/whatever points to the same resource as domain1/whatever WITHOUT AN HTTP REDIRECT NOR BROWSER TRICKS LIKE FRAMES. I would also love to be able to send mail to "blah@domain2" and have it go to "blah@domain1". Can this be set up, and how? I am using GoDaddy as registrar and DNS host for both domains. GoDaddy is also the web host for domain1, and mail hosting is with Google Apps.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >