Search Results

Search found 9758 results on 391 pages for 'wireless networking'.

Page 88/391 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Ad-hoc network(hot spot created) not detected by android phone

  - by Nirmik

  I created a hot spot via network wireless use as hotspot. Other laptops successfully detected the hot-spot,could connect and use it without any problem. But no android phone could detect it.! I tried with many android phones but none could.(I found out that even an ad-hoc created in windows is not detected by any phone) So is there anything wrong i am doing(rather i am not doing anything actually other than clicking on the "use as hotspt" button..but still..)? or is that the network cannot be shared with phones? and if not,how can i share it with phones?

  Read the article

• After running updates in 10.10 Netbook Remix, Ralink 5390 Not working

  - by nosound

  Additional Drivers still lists the driver. Reports it as being activated but not in use. Prior to running updates, wireless was working fine. Set it up using this guide: http://www.upubuntu.com/2012/02/how-to-install-drivers-for-ralink.html Thoughts and reflections would be much appreciated. ... nm. Using Synaptic Package Manager, marked for reinstallation, reinstalled, rebooted. Back to the way things were. Little new to this side of the world. ;)

  Read the article

• Wifi not working after upgrading from 12.04 to 13.10

  - by Gary

  I went through loads of posts looking for an answer to my WiFi problems but can't seem to fix it. I had Ubuntu 12.04 installed and WiFi worked fine with no issues whatsoever but then I upgraded to 13.10 it has stopped working. It shows the available networks but I can't connect to any of them it just does that animation thing then stops working. Update Heres the link to pastebin: http://pastebin.com/GyMMEYhv And heres what wifi card i have and driver lspci: 01:00.2 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0a) Subsystem: Hewlett-Packard Company Device [103c:18de] Kernel driver in use: r8169 02:00.0 Network controller [0280]: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe [1814:3290] Subsystem: Hewlett-Packard Company Device [103c:18ec] Kernel driver in use: rt2800pci

  Read the article

• Load old kernel module while keeping current

  - by legion

  So I was wondering if there is anyway that I would be able to load an old iwlwifi from a 2.6 kernel while still using the 3.2 kernel and if there was a guide to doing so? I need to be able to do so because my wireless card is.... well the new kernels have broken all support for my card, which is a Intel Ultimate-N 6300. I'm extremely upset with how badly they broke support for this card to the point where I can't connect to any router that isn't wifi N enabled and even then only a select few routers work, it amazes me as to how awful it is and whats more amazing is how well it worked in 2.6 kernels. I've tried all the work arounds that have been discussed to try and fix this, and the only thing I have found that works is running a 2.6 kernel. However I would like to be able to keep my 3.2 kernel and just load up an old version of iwlwifi that actually supports it, is there anyway to do this?

  Read the article

• Deactivated wifi drivers, now they won't activate again on a Dell Mini 10v?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Removing a module when I add a new better one?

  - by yinon

  I'm using this guide to install my TL-WN822N (Wireless/Wifi). I need to add 8192cu at the end of /etc/modules, but I see another module there (Copy-Paste file): # /etc/modules: kernel modules to load at boot time. # # This file contains the names of kernel modules that should be loaded # at boot time, one per line. Lines beginning with "#" are ignored. # Parameters can be specified after the module name. lp 8192cuvhba vhba Should I remove it or is that unnecessary? Thanks for any help!

  Read the article

• Deactivated wifi drivers, now they wont activate again?

  - by UbuntuFan

  I have ubuntu 13.04. In the software and update menu, under additional drivers, Were it says "Broadcom Corporation; BCM4312 802.11b/gLP.PHY" the box labbeled "do not use it ticked" and when i try tick the one that says "Using Broadcom 802.11 Linux STA Wireless drivers....." it wont let me apply changes, it starts doing it then stops and re-ticks the do not use box. Because of this I can not use the wiress driver. Is there another way i can fix this. Or maby restore ubuntu to previous date. I accidentally ticked the do not use box this morning and now can't undo it. I have restarted several times to try apply changes and still no luck

  Read the article

• Samsung NC10 Broadcom difficulties

  - by simonp

  I am new to Ubuntu/Linux and am stuck already! Any help much appreciated. I have managed to install Ubuntu Maverick 10.10 (from a USB flash drive) on my NC10 which also has Windows 7 on the partitioned drive. But the wireless internet is not working. I have identified the hardware as a Broadcom BCM4313. I have also managed to find that the correct driver is installed (Modaliases for Broadcom 802.11 Linux STA driver). I have followed advice from elsewhere and there does not seem to be any competition from other drivers. I am now stuck and do not have any other internet access on this netbook. Any ideas?

  Read the article

• How do I do a B43 Legacy install on Ubuntu 11.10?

  - by Gozzy

  I recently installed ubuntu onto an extra hard drive and everything booted correctly. However, my Linksys wireless card is not working. I went though all the forums and walk throughs and I know that I need to install the b43 legacy firmware to get the card to work. When I try to install the files, I keep getting the message in Terminal saying "No such file or directory" for every file i need to run. It's Ubuntu 11.10 on a dell optiplex gx280. Also, the "pool" file that is supposed to be on the file system is not there

  Read the article

• Wifi very slow on Ubuntu 12.04 but not on Win7, need help

  - by user84504

  I have an enormous problem: I've a Sony Vaio VGN-NR21S with win7 and Ubuntu 12.04 in dual boot. With Windows everything is fine (except that is windows) but with Ubuntu the wireless connection is awfully slow, basically unusable. I've already search for similar discussion but the solution proposed didn't worked. I've noticed this issue also in live mode both with ubuntu and linux mint. I've installed Ubuntu onto an Acer that shows the same problem when connected via wifi to my router, so I think that maybe the issue is about compatibility with my home router. I really need help, I don't want unistall ubuntu! Please tell me which output u need to help me, thanks.

  Read the article

• Need instructions on how to create wpa_supplicant.conf and add fast_reauth=0 to it

  - by nutty about natty

  Like many other natty users on a university/academic network, I'm experiencing annoying frequent disconnects/hangs/delays. See, for instance here. I would like to learn how to add fast_reauth=0 to the wpa_supplicant.conf file. This file, it seems, does not exit by default, and needs to be manually created first: README You will need to make a configuration file, e.g. /etc/wpa_supplicant.conf, with network configuration for the networks you are going to use. Further, I installed wpa_gui which probably needs to be launched with parameters, else it's pretty blank... What I'm hoping for is this: That creating a wpa_supplicant.conf file with fast_reauth=0 in it, saving it to the relevant path, will work and make my uni wireless (more or even completely) stable. I read mixed reviews about wicd (as an alternative to the network manager). Also note that on my basic wlan at home (with bog-standard wpa encryption) the connection is stable. Thanks!

  Read the article

• Laptop wakes while lid is closed and overheats

  - by user56601

  I'm running 12.04 on a toshiba L305D with athlon x2 (Already suspect this has something to do with it). My laptop will wake from suspend, presumably from wireless scanning. This is a serious bug as sleeping laptops are often inside bags, so the cooling system is effectively disabled. I can no longer seriously use Ubuntu when I have to worry about hardware damage every time I close the lid. There is shockingly lack of information about anything close to this. So many control panels have been removed or dumbed down, and everyone seems to want this behavior instead of the opposite, for servers or torrents of whatever. Well, most laptop users will 99% be likely to regularly put their laptop in a backpack or briefcase or other bag. Does anyone know how to fix this?

  Read the article

• Ubuntu and WiFi Network

  - by Anonymous

  I have been trying to figure out this problem. I am currently dual-booting Ubuntu with my Windows machine. My Ubuntu would connect to my wireless router but it cannot access any web pages nor ping any hosts. Wired connection works just fine. My Windows OS in the same machine (with the exact same network configuration as my Ubuntu machine) connects and works fine. I don't know why Ubuntu cannot access the Internet. Any ideas?

  Read the article

• Samsung RV520 with 12.04 freezes while having WiFi and brightness control issues

  - by daveu1

  I have a new Samsung RV520 and have just installed Precise Pangolin 12.04 LTS. I am having serious problems now with the wifi constantly disconnecting. This then causes the brightness control to appear on the screen. The screen starts flickering and then freezes the whole machine. Indeed the brightness control doesn't work at all. I am using a Intel Centrino N wireless card. Please can anyone provide any guidance as to how to resolve these issue on this machine. Many thanks for your help.

  Read the article

• BCM4313 partially working on Toshiba Satellite R630 (Ubuntu 12.10)

  - by Denis

  New to Ubuntu. During installation, the computer identified the wifi card and asked me to connect to the network. I did. After the first restart the wifi was working and I could see networks and connect to them. After the second restart the wireless has VANISHED. Still, the Broadcom STA drivers are enabled in system settings/additional drivers. Tried to restart 5 more times- no effect. I have studied very many topics on askubuntu but none of them work.

  Read the article

• Ubuntu Server 12.04, Wifi problems

  - by brievolz84

  When I installed Ubuntu Server 12.04, I selected the ethernet adapter because I will use that most often; however, I would like to use wifi sometimes as well. This is how far I've gotten with this problem. lspci 02:00.0 Network Controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection iwconfig wlan0 IEEE a/b/g/n BSSID=off/any Mode=Managed Access Point=Not-Associated TX-Power=off Retry Long Limit:7 RTS thr:off Fragment thr:off Power Management:off I tried to do iwconfig wlan0 up but that doesn't work either. The error message said something along the lines of rfkill but I'm not connected to the Internet to download that particular program. Any help here would be great

  Read the article

• Wi-Fi not working only on Ubuntu computer?

  - by Joseph_carp

  The Wi-Fi at our house does not work on my Asus notebook running Ubuntu 12.04. It works fine on all other devices except this one. Internet worked fine before I had Ubuntu and I had Windows 7, but we also had a different ISP and place. My roommate's Windows 7 notebook and netbook both work fine with the internet and so do all of our phones and iPods. I do not know what is wrong because it works fine EVERYWHERE else, but when I am connected to my own router at my house it is either EXTREMELY slow or it just loads and loads and loads. I have all of the correct drivers and all that so why is it just this one connection that is a problem. I do not know if this matters but the ISP is Comcast and so is the Modem/wireless-router. Any help is much appreciated, thank you.

  Read the article

• Create a HotSpot which requires a username and password

  - by Trumbun

  I wish to set up a wireless access point which requires a username and password in order for clients to use the internet. The network setup will be internet modem connected to an Ubuntu Server (2 networks cards). The first network cards to get the internet to the server and the second network card to connect the the wifi hotspot. The server will host the software such as (Example software for windows) which will control the user connected by forcing them to login with the credentials given at the reception. Can some suggest some software that I can use? Thanks in advance

  Read the article

• Windows.Networking.EndpointPair constructor parameters

  - by ComFreek

  I want to create a new EndpointPair object: // hostname is a string // port is an integer var endpointPair = new Windows.Networking.EndpointPair(null, null, hostname, port); But I always get this error: 0x800a000d - JavaScript runtime error: Type mismatch I've already tried the following: converting port to a string passing "" instead of null for the first two Parameters. (null should be okay if the documentation here, under the section Remarks, is right) passing no Parameters, but that ends up in an "too few parameters" error message Above all, the documentation about the constructor has been removed (as of September 4, 2012): http://msdn.microsoft.com/en-us/library/windows/apps/windows.networking.endpointpair.endpointpair.aspx

  Read the article

• No Homegroup Computers, Network Troubleshooter Fails

  - by Mokubai

  I have a problem with my Windows 7 Homegroup, between two Windows 7 Home Premium machines. On one machine I get this: The other machine in the Homegroup is perfectly happy and is able to see and browse this faulty machine as if there is nothing wrong. The Network and Sharing Center shows that I am joined to a Homegroup on my "Home" network and nothing is out of the ordinary. I have tried leaving the Homegroup and rejoining/recreating it several times and that does nothing at all. Normal browsing to machine names and looking through folders seems to work, but it's a much more clunky way to get stuff compared to the convenience of the Homegroup facilities. Starting the troubleshooter detects some problems with a "Peer Networking" (PNRpr or something like that) service not starting but fails to fix anything. Sure enough when I go to view the services via Control Panel - Administrative Tools - Services I see that both the "Peer Name Resolution Protocol" and "Peer Networking Grouping" services are stopped. Attempting to start the "Peer Networking Grouping" gives an error that a dependency service will not start, the only service it is dependant on is the "Peer Name Resolution Protocol" so I try to start that and I get an error saying that the "service could not start due to error 0x80630801" This has happened before and I have fixed it then by using System Restore and restoring the machine to a week before when I knew it had all worked. This time though I cannot remember when I last used the Homegroup from this machine and I've installed quite a bit so I don't want to go fumbling through restore points trying to find one that works... Can anyone tell me if there is a way to reset things so that this machine is able to use the Homegroup again?

  Read the article

• Configure a Windows PC as network appliance w/o monitor, keyboard and mouse

  - by Joshua Lim

  I intend to use a small form factor PC with Windows 7 Professional installed as a network appliance attached directly to my customer's LAN without connecting a monitor, keyboard or mouse. How should I configure the networking for my PC so that I can access it via say my laptop? I figure that I can do it 2 ways. Attach my laptop to the PC using a crossover cable? Connect via RDP and configure networking. Configure an IP address on the PC before I deliver it to the customer place. At the customer's place, attach the PC to LAN and connect to the IP address which I previously configured from my laptop or from one of the customer's workstations. I know the first way is doable, but is the second way possible? I'm sorry if this question sounds ridiculous - I am Delphi programmer but a novice on networking. Finally, if possible, I hope to make the configuration process web based as I wouldn't like to reveal the fact that I am using Win7 Pro for the network appliance!

  Read the article

• No network connection for vmware esxi guests

  - by JavaDev

  I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

  Read the article

• Monitor Mode on the Intel Centrino(R) Advanced-N 6205 (WEP Penetration) On Windows

  - by WindowsEscapist

  Can anyone tell me a way to do WEP hacking (legal, of course) (on my own wireless connection, for the purposes of this question) with Wireshark or similar programs on an Intel Centrino Advanced-N 6205? (Laptop is Acer Aspire 5750-6866.) According to the programs, I cannot accomplish this (monitor mode) but seeing as it is a fairly recent wireless card (should be able to support this) are there any cracked drivers available or does anyone have the knowledge to make one? Much appreciated! Thanks.

  Read the article

• Network devices disabled

  - by Tao

  I've been running the Lucid Lynx alpha since first release and only now, after recently putting my computer into suspend then restarting, has the networking failed completely. Both wireless and ethernet list as disabled with sudo lshw -C network. The wireless adapter is an Atheros AR928X. The ethernet is a Realtek RTL8111/8168B. Any suggestions as to how I might go about fixing this?

  Read the article

• Sonicwall 3500 (Creating VLANS for usage of multiple SSID)

  - by Thomas Chia

  I have an issue here. Here is my setup: X0 - STAFF network | X2 - AGENT network | X4 - Wireless AP (for multiple SSID) Okay, basically I'm going to set up the wireless AP to be broadcasting 2 SSID, STAFF-WIFI and AGENT WIFI. When connected to STAFF-WIFI, the users will be connected to the STAFF network, while connected to the AGENT WIFI, the users will be connected to the AGENT network. Can someone explain in details how to go about setting up this configuration? Thanks!

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >