Search Results

Search found 20273 results on 811 pages for 'network camera'.

Page 89/811 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Odd Series of Packets, How would I reproduce this behavior?

    - by JustSmith
    I recorded a series of http packets that I cant programmatically recreate. The series of packets goes like this: HTTP GET /axis-cgi/admin/param.cgi?action=list&group=Network.eth0.MACAddress,Properties.System.SerialNumber,DVTelTest,SightLogix.ProdShortName HTTP/1.1 HTTP HTTP/1.1 200 OK (text/plain) HTTP GET /axis-cgi/admin/param.cgi?action=list&group=Properties.Image.Resolution HTTP/1.1 HTTP HTTP/1.1 200 OK (text/plain) HTTP GET /axis-cgi/admin/param.cgi?action=update&Network.RTSP.ProtViewer=password HTTP/1.1 HTTP GET /axis-cgi/admin/param.cgi?action=list&group=Event HTTP/1.1 HTTP HTTP/1.1 200 OK (text/plain) HTTP GET /axis-cgi/admin/param.cgi?action=list&group=ImageSource.I0.Sensor HTTP/1.1 HTTP HTTP/1.1 200 OK (text/plain) Notice the two GET followed by one response. I though the two gets were going out at the same time but there is no corresponding number of responses. Also when trying to reproduce this pattern as the server if I abort the first GET request the client waits until it times out and starts the request over with out sending any other requests. What is happening here? How can I reproduce it?

    Read the article

  • Cisco Prime NCS not starting

    - by Kwazii
    I have received the Cisco Prime OVA file and which we placed onto an Oracle virtual environment. We turn the VM on and the CLI boots, When we try to start the NCS service we get errors. HOSTNAME/USER# ncs start Starting Network Control System... Exception in thread "main" java.lang.NullPointerException at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Logs HOSTNAME/USER# show logging 07/18/13 10:25:38.878 INFO [system] [main] Setting management interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting peer server interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting client interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting local host name to HOSTNAME 07/18/13 10:25:40.341 ERROR [system] [main] THROW java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at com.cisco.server.persistence.util.OracleSchemaUtil.openConnection(OracleSchemaUtil.java:277) at com.cisco.server.persistence.util.OracleSchemaUtil.dbServerUp(OracleSchemaUtil.java:836) at com.cisco.packaging.DBAdmin.dbServerUp(DBAdmin.java:1429) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:833) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:757) at com.cisco.packaging.WCSAdmin.wcsServerUp(WCSAdmin.java:637) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:294) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:375) at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422) at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:678) at oracle.net.ns.NSProtocol.connect(NSProtocol.java:238) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1054) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308) ... 15 more Caused by: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:209) at oracle.net.nt.ConnOption.connect(ConnOption.java:123) at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:353) ... 20 more 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.347 INFO [admin] [main] Starting Network Control System... 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.394 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPersistenceDirectory(UDIManager.java:139) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:332) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.396 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setVirtualPID(UDIManager.java:169) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:333) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPhysicalPID(UDIManager.java:154) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:334) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.getUDI(UDIManager.java:112) at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Any help is appreciated, Thanks

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Can't attach EC2 instance to Network Interface

    - by Ian Warburton
    When trying to attach a network interface, it says... No instances were found for this availability zone. My instance is in us-east-1c and my network interface is in us-east-1b. Is that significant? If so, how do I create the VPC in the same zone and if not then why this error? EDIT: I've re-created the VPC and the Network Interface is now us-east-1c and the EC2 instance is also us-east-1c. Same error message though!

    Read the article

  • Installing Win7 over PXE through Serva fails on Loading Network Resources

    - by Armand
    Trying to install Win7 OS to a Lenovo E335 with no DVD/CD. I have to do it either over PXE/Network or USB. Although I am able to get passt the installation menu of Serva, it fails on Loading Network Resources ... FAILED No NIC/Driver, ABORTING! This is the only log on the Serva Client PC and nothing on the Serva-server. Would appreciate if someone can tell me how to go pass this error. THe network card works fine, it has already loaded the Windows installation structure on a X: drive on the new laptop. Another detail: I am using a normal Ethernet Cable to connect the PCs. Should this be enough or a crossover cable is a must in this case?

    Read the article

  • "No active network adapters found" Hyper-V 2008 R2

    - by mnemosyn
    I fiddled around with the virtual network settings of my Hyper-V server, because Windows Update failed to run in the VMs. I set the flag that makes the NIC exclusively usable by the VM. Now, the host system tells me it has no active network adapters. What does that even mean? According to netsh, there are three enabled network connections. I tried to restart the NICs using devcon.exe (the correct x64 version), but that doesn't make any difference - still, devcon reports the NICs are there and they are activated?! Is there any way I can force the host to re-enable the NICs?

    Read the article

  • WOL for Asus M5A97 built in Realtek Network Adapter

    - by madphp
    I cant get wake on lan to work for my built in network adapter. Its a ASUS M5A97 motherboard, and the network adapter is a Realtek PCIe GBE. I have Shutdown WakeOnLan - Enabled Wake on Magic Packet - Enabled Wake on Pattern Match - Enabled WOL & Shutdown Link Speed - 10 Mbps First I have set up a magic packet client to listen, and the packet is getting through. I have also checked these in Power Management for the network adapter. Allow the computer to turn off this device to save power Allow this device to wake the computer Allow a magic packet to wake the computer.

    Read the article

  • Windows - Use Local Service and/or Network Service account for a windows service

    - by user19185
    I've created a window's service that monitors files on a specific directory on our Windows OS. When a file is detected, the service does some file I/O, reads the files, creates sub-directories, etc. This service also uses database connectivity to connect to another server. My plan is to have the service run as the default "Local Service" account. Since I need to allow write/read privileges, which apparently the "Local Service" account does not do by default, I'm going to explicitly set "Full Control" privileges for the "Local Service" account on the folder that I'm reading/writing to and from. I believe the above is a good . My question is, for the folder that I'm reading and writing to, do I need to setup a "Network Service" role with full control access? I'm wondering since my service uses database connectivity to another server, if I'll need the "Network Service" account setup. I may be misunderstanding what the "Network Service" account does.

    Read the article

  • Need help diagnosing network performance issues

    - by tokes
    I am currently working in a developing country as a system analyst for a government department. My area of expertise is software projects, but I've come across a few issues with the network setup in my office. (Unfortunately, being a developing country, there's not a lot of professional help available for this sort of thing.) Most recently, I am trying to diagnose a problem with slowness on the network. Our office is connected to the internet via an ADSL wireless modem/router (called Router). The modem is connected via ethernet to a switch (called Switch). The modem also acts as a wireless access point (called Wireless1), though because it is in a room at the end of the floor, it's range is limited. There are ethernet ports installed around the office. The cables of these all lead back to the same switch. In closer vicinity to the bulk of the client computers, there is another wireless router that acts as an access point for those clients (called Wireless2). That router is connected via ethernet to a wall port, and therefore to Switch. There is also a Windows server which acts as a DNS server (called DNSBox) which is located in the same room and is connected directly to Switch. ---Internet----------| Router/Wireless1 192.168.10.1 ---------------| |----|=========| DNSBox | |-------------------- 192.168.10.4 --------------------| Switch |---Other clients---- | |-------------------- |----|=========| Wireless2 ------------------| 192.168.10.198 One final thing to mention about the network setup. All clients are configured with manual IP addresses. Their router/gateway is set to the IP address of Router, and their DNS server is set to the IP address of DNSBox (with a secondary IP set to an external IP - that of our ISP's DNS server). Here are the symptoms we are experiencing: Clients connected to Wireless2 AP experience slow and unstable connections to the internet. (Slow here is defined as speeds of ~1KB/s, though ping response times seem to be as normal.) Clients connected via ethernet to Switch also experience the same slowness. Clients connected to Wireless1 AP (i.e. connecting via wireless directly to the ADSL modem) experience normal connections to the internet. Clients connected via ethernet to Router (i.e. connecting via ethernet directly to the ADSL modem) also experience normal connections to the internet. I also tried to gauge the connection performance between two machines on the network via ethernet: A file transfer between two clients who were both directly connected to Switch was the fastest; A file transfer between one client directly connected to Switch, and one client directly connected to Router (which is directly connected to Switch) performed much slower; A file transfer between two clients directly connected to Router also performed slowly. Things I have attempted to diagnose the problem: Restarted Switch -- no change. We tried unplugging ethernet jacks from Switch 4 at a time and testing the internet connection. The thought here was that perhaps a client on the network has contracted a virus, and is possibly spamming the network with traffic? (Not very technical, I know.) Unfortunately we couldn't get any significant increases in performance using this method. There were a couple of times when it seemed to be better, but then the connection speed quickly dropped back to slow/dead pace. I didn't want to unplug all jacks from Switch because I was concerned that users might be affected or that I would re-plug in the jacks incorrectly (should I even be worried about that? a port is a port on a switch, right?) I tried swapping the ethernet cable used to connect Router to Switch -- no change in performance. I tried swapping the port used on Switch for Router -- no change in performance. Anyone got any ideas on what this could be? Should I be mentioning specific brand names/models of the hardware used? Virii outbreaks are common in this country/office -- what could I be doing to figure out if a virus is at fault? If it is a virus, it doesn't seem to be generating a lot of traffic to/from the internet, because a) I can still get a good speed if I am directly connected to Router / Wireless1 and b) our ISP data usage has not risen suspiciously. Thanks for your help! Update #1 Here are the specs of some of the hardware: Switch is an Edimax ES3132RL 32-Port 10/100 Rackmount Switch Router is a D-Link DSL-G604T Update #2 I just tried unplugging everything except a laptop and Router from Switch. Speeds are still slow. I guess that means that Router / Switch are not being flooded? It seems more and more likely that the cause is something to do with the interaction between Router and Switch. However, I still can't find any useful resources on setting the LAN speed for either (and I'm not well-versed in these advanced networking configurations).

    Read the article

  • WAMP, DD-WRT, Using DNSMasq to access multiple virtual hosts via aliases on local network

    - by christian
    I've updated my question to coincide with my progress I am attempting to configure WAMP on my development machine. I would like to use it in conjunction with DD-WRT's DNSMasq feature to access multiple virtual hosts via aliases (dev1.local,dev2.local,etc.) over my local wireless network. I have followed the following tutorial which allows me to setup virtual hosts and access on local network by ip addresses. http://www.logicspot.com/web-development-2/viewing-a-locally-hosted-website-with-your-smartphone/ I've got this up and running. For simplicity sake I'd still like to setup DNSMasq to connect via aliases. I have followed the following tutorial http://www.question-defense.com/2008/12/29/add-static-dns-entries-to-dd-wrt-router-firmware And the aliases load on my development machine, but I can not access via the aliases on my mobile devices connected to the local network. I can however access via IPs. Thanks for any help you can provide

    Read the article

  • Unidentified Connection in Compaq CQ61Windows7 OS on DSL cable network connection

    - by Mohammed Thouseef
    I have Dell studio with shared DSL internet connection my router is "NETGEAR DG834" & Network connection discription is "Broadcom netlink tm gigabit ethernet" this connection is working fine with dell laptop with Vista homepremium OS. My Question is? If i connect HPcompaq presario CQ61 in this connection it will automatically select Public network and display unidentified connection i tried several times but not suceeded its OS is Win7 home premium. but wireless networking is working fine only this problem is faceing with DSL cable connection when i diagnos the connection an error will generate "Local Area Connection does not have a valid IP configuration" in LAN Connection status window i noticed IPV4 & IPV6 Connectivity is showing "No Network Access" please can you clarify whats the problem.

    Read the article

  • Windows Service and Group Policy unable to access network share on Win2008 Domain

    - by Terence Johnson
    I have one computer on my domain that has suddenly stopped receiving software updates via group policy. Domain logins still work, and group policy on the machine is still being updated, so it knows that there are new packages to install and where to look for them, but every time it tries to install a package, it throws a 1622 error (location not found). Logged in users can reach the same network shares, and every other computer on network is installing the packages. Further investigation found that other services running as "System" on the problematic computer are also unable to authenticate to network shares. How do I diagnose/fix this computer's account in Active Directory? The computer account exists, and is a member of "Domain Computers" - or is there something else I should be looking at?

    Read the article

  • Remote Desktop, Host: 2008, Client: Windows 7, The remote computer requires Network Level Authentica

    - by deerchao
    Hi, today I accidently changed one option of Teminal Services, I checked "Allow connections only from computers running Remote Desktop with Network Level Authentication". After that, I can't connect to my server any more. The error says: The remote computer requires Network Level Authentication, which your computer does not support. But my client pcs(both home and at office) are running Windows 7, as far as I know, it shoud support NLA; And in About dialog of Remote Desktop Connection there says "Supports Network Level Authentication". My server is running Windows Server 2008, placed in IDC center; I could connect to it before I change the settings. All other sevices(like IIS, SQL Server) are running normally. For clients, I tried two PCs running Windows 7, and two virtual windows XP machine running in Virtual PC and Virtual Box, all of them gives the same error message. Is there a way I can make things right without go to IDC which is far away? Thanks.

    Read the article

  • Network issues with DNS not being found

    - by Anriëtte Combrink
    Hi there This is exactly like how our network looks like: Single server with a network router Everything is setup, but I cannot connect our Macs under the Login Options - Join... to this server. Our server's name is Toolbox and I have tried Toolbox.local, Toolbox.private, prepended the afp:// protocol to the name, but nothing, our Macs just don't want to connect this way. Our router has DHCP and gives out all the IP addresses naturally, would I have to add Toolbox.local to the DNS on the router and like it via static internal IP to the server? Our Macs keep giving the following error while trying to join the Network Account Server: Unable to add server Could not resolve the address (2200) What am I doing wrong?

    Read the article

  • Delayed startup of network icon (wi-fi)

    - by Michael Dy
    When my Windows 7 Starter netbook boots up and after everything is loaded, it takes about five minutes before the network icon near the clock becomes functional. When there's an available wi-fi signal (which automatically connects to my netbook as preconfigured) after the boot, my netbook seamlessly connects to it even if the network icon cannot be clicked or accessed. (The icon is shown to be loading for about five minutes.) During this time, when I go to Network and Sharing Center, it takes the same time to load. So even while the icon and the Center cannot be accessed, I can surf the Internet. When my netbook was still new, it didn't have this issue. How do I fix this?

    Read the article

  • What is the difference betweeen "Network install" and "Network Boot" options in virt-manager when installing a new virtual machine

    - by Marwan
    From my understanding of PXE (Preboot Execution Environment), I know that there must be some negotiation first between the booting client and a DHCP server to obtain network parameters (IP address, etc) in order for the client to be able to fetch the boot loader and kernel image from the boot server. In other words, and aside from being a "virtual" machine, we're talking here about a "bare metal" machine, so there must be some "pre boot" mechanism for those negotiations to take place, and this is exactly what PXE is all about. When I think about the "Network install" option, I can't figure out how the new VM would be able to fetch the boot images (bootloader and kernel) without the previously mentioned mechanism. So, here is a short version of the question: When provisioning a new virtul machine, how do you expect the "Network install" option in virt-manager to work behind the scenes? Many thanks.

    Read the article

  • Scheduled task to map a network drive runs, but doesn't map the drive

    - by bikefixxer
    I have a task set up to run whenever the computer is logged onto that deletes all network folders and maps a network drive. Here is what is in the batch file: @echo off net use * /delete /y net use b: \\Server\Share /user:DOMAIN\Username password exit When the computer is restarted or logged off and back on, the task runs fine (according to the scheduled tasks window saying when it ran last) but the mapped drive doesn't show up. I'll open the command prompt and type "net use" and it simply says "There are no entries in the list". If I then right click on the task and run it, it works and the mapped drive shows up. I've checked the log and nothing shows up. I've tried adding a timer in the batch file so it waits 10 seconds (ping 1.1.1.1 -n 1 -w 10000nul) thinking that maybe the network wasn't connected, but that didn't work. What else can I try? Thanks!

    Read the article

  • Network bottleneck/throttling issue

    - by Gavin
    Hi all, It's my first day at a new company and i've been given the task to find out an issue with the internet connection. I noticed that whilst I was downloading a large file, the network grinds to a halt, except for my download. At first I thought it was the internet connection/modem but it seems that whilst the lockdown occurs, I am unable to access any network device. Has anyone experienced this before and if so, do you have any pointers? Looking at the setup. They have an DSL modem that connects to a 10/100 switch. There are only 5-6 computers on the network. Cheers Gavin

    Read the article

  • I can't get router and switches configured properly for my home office network

    - by BernicusMaximus
    Networking Gurus, I recently built a new detached garage, with an office above. As such I had it tied into my existing home ethernet wiring. The ethernet signal is coming into the garage just fine, but I can not get my network configured the way I want because of problems trying to link the various router/switch devices. Please see the following links for the network diagrams: Home Network So basically, I can't my future state to work. I'm not sure if I'm using incompatible switches or what, but I tried the future state with some 4 port switches from best buy and had no luck. I resorted to setting up the Current State so I could operate. What I am looking for is help on how best to get my future state to work. Is this possible with my current configuration, and if not, what should I do? Any help is appreciated. Thanks, Bernie

    Read the article

  • Disable (or switch off) a network interface on windows but keep the "plug and play"

    - by Leandro
    I'm looking for a good workaround to do this on Windows 7 and Windows XP: Disable or make ineffective the network interface (ETH, WIFI, any NIC). If the user connect his ETH cable, the network interface enable again. Important Notes to take care: I'm working with wmic on Win7 (through the command line) I'm working with devcon on WinXP (through the command line) I'm specifically working with the .NET Framework 2.0 on C# but this is just for informational purposes. I know that an event won't help me to detect it (if there is a way or workaround to do this I don't know it). The real problem is that when I disable the NIC, I can't know if the user connects his cable or has a wired network. This is why I am looking for a workaround. I'll treat suggestions as answers if no direct answer exists. I'll provide any extra detail necessary.

    Read the article

  • Routing traffic to another internal network

    - by Jason
    OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

    Read the article

  • Mac Parallels - Bridged network

    - by Jack
    Hey All, I am new to Apple and my task is to install VMs on a Mac server. I am trying to install 4 VMs and I want them to have separate IPs and be visible on the network as separate machines. What are my options ? My research shows me that I can use bridged network, but I have to select an adapter. I have only two network adapters, does that mean I can only have 2 VMs ? And when I configure the 2 VMS, will my actual server have internet connection ? Or does it use the Mac address ?

    Read the article

  • Local network cache of PHP and Apache2 on Win Server 2008 R2

    - by Ahmed Benlahsen
    Software configuration : I have a new server with Windows Server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separate packages. Issue : On my first installation of my application, all works great. When I updated some JS and CSS files and accessed my application again from a PC on local network, I got the old JS and CSS versions. When I access the same application on local server I got the latest versions of those files. Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I think that must be some cache but I don't know where. Maybe on Win Server 2008 R2 or on VMWare? The question is: Why, when I access my application on the server, everything works fine, but when I access the same application from a local network, I do not see the updated versions of JS and CSS files?

    Read the article

  • Routing traffic to another internal network

    - by Jason
    OK, so here is the scenario. I have 4 Locations connected with an MPLS. I have installed an ASA at the primary location which is 10.20.1.0. Traffic is fine internally and to the world, however... I can't route traffic over the MPLS to another network. It is being blocked by an implicit deny rule even though there is a rule to allow any to any less secure interface (it should be using the same interface in/out, right?). I have a static route for the network in and the ASA can ping it - Just not traffic on the internal network of the ASA. -Jason

    Read the article

  • Copy Network Volume configuration among Linux systems

    - by David Yu
    I have several standalone Debian Linux (Lenny) systems. As it stands now, all of the systems are configured with a generic login account. This login account has a network volume that connects to a Windows share on a Windows server. I need to create a batch of user accounts on all of the systems (this part I figured out). After I create all of the user accounts, I need all of them to have the same network volume mapping as the current generic account. Is the network volume configuration saved somewhere, where I could copy that configuration across all of the user accounts?

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >