Search Results

Search found 3582 results on 144 pages for 'digital camera'.

Page 9/144 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Western Digital HDD disappears and reappears in BIOS

    - by tbkn23
    I know many people asked about similar problems, but I have a very specific case where I can't understand what's going on... I have a 3TB Western Digital Caviar Green disk connected in my Desktop, that also has a seagate 1.5TB disk and 2 SSD drives (OCZ and Sandisk). After working fine for quite some time (probably more than a year), suddenly my Caviar Green drive disappeared from windows. I checked the BIOS, and it wasn't there either. I opened my PC, played with the connectors, power, etc, but nothing helped. Even tried switching connectors with those of the 1.5TB disk, and nothing changed, the 1.5TB seagate was there, but the 3TB WD was not. Ok, now for the strange part. I have another desktop at home, so I took out my 3TB drive, connected it there, and it worked fine! I copied the most important files out of it, and then made another attempt in the original desktop. Surprise! It now appeared in the BIOS and worked fine! I even ran the SMART test with the WD tools and it said everything was intact. It doesn't end here. After leaving it overnight in the original desktop, it disappeared again in the morning. I repeated the entire process, connecting it to the second desktop, and there it is again working fine. Now for my question... Whats going on? The disk seems to be appearing on/off in my original Desktop, while other drives there work fine. SMART test says the disk is fine. Any ideas? Is the disk defective and should be replaced? Or maybe there's a problem with the controller in the desktop? I'm using a Gigabyte GA-880GA-UD3H motherboard and tried connecting the drive to both bridges (SATA2 and SATA3 bridges). Thanks EDIT: Power options are set never to turn off hard drives:

    Read the article

  • Zoneminder camera permanently idle

    - by C. Ross
    I have an Ubuntu server with zoneminder installed. I only have one camera (cheap Logitech USB model) and it seems to be permanently idle. I'm also getting this error repeatedly in the logs 06/06/2010 08:26:56.563783 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:26:56.812964 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:26:56, pid = 29214] 06/06/2010 08:27:06.814486 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:27:07.054854 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:27:07, pid = 29219] I've already tried following the instructions in the FAQ for increasing shared memory, but that doesn't seem to work. What do I need to do to get this working?

    Read the article

  • Command line method to find disk usage of camera mounted using gvfs

    - by Hamish Downer
    When my camera was mounted on /media I could use the standard tools (df) to see the disk usage of the card in my camera. However now the camera is mounted using gvfs, and df seems to ignore it. I've also tried pydf and discus to no avail. The camera is definitely available through nautilus, and when I select the camera in nautlius, the status bar tells me the amount of disk free. I can also open the ~/.gvfs/ folder in nautilus and right click on the camera folder and get the disk usage in a graphical way. But that is no use for a script. Are there command line tools that are the equivalent of df for gvfs filesystems? Or even better, a way to make df report on gvfs filesystems?

    Read the article

  • How to access photos from my Genius G-Shot P7545 camera?

    - by Florin
    I have a Genius G-Shot P7545 camera. In Windows I had just to plug in the camera to the usb and acces it like a usb stick. I tried to do that in Ubuntu 10.10 with no result. How can I acces the photots? With these comands I get: lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 015: ID 0784:1692 Vivitar, Inc. Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xcf5acf5a Device Boot Start End Blocks Id System /dev/sda1 * 1 2550 20478976 83 Linux /dev/sda3 2550 19458 135810048 f W95 Ext'd (LBA) /dev/sda5 2550 19458 135809024 83 Linux Unable to read /dev/sdb

    Read the article

  • Capture RTSP stream from IP Camera and store

    - by Keerthi
    I've got a few IP Cameras which output an RTSP (h264 mpeg4) stream. Hitting the URL locally via VLC: rtsp://192.168.0.21:554/mpeg4 I can stream the camera and dump to disk (on my desktop). I'd like to however store these files on my NAS (FreeNAS). I was looking at ways to capture the RTSP stream and dump them to disk but I'm unable to find anything. Is it possible to capture the stream on FreeBSD or Linux (RaspberryPi) and dump the streamed content to a disk local to Linux or FreeBSD - preferably every 30minutes? EDIT: The NAS is headless (HP N55L or something) and the RaspberryPi's are headless too. I've already looked into ZoneMinder but need something small. I was hoping maybe using Motion to detect motion on the stream but that will come later.

    Read the article

  • Zoneminder camera permanently idle

    - by C. Ross
    I have an Ubuntu server with zoneminder installed. I only have one camera (cheap Logitech USB model) and it seems to be permanently idle. I'm also getting this error repeatedly in the logs 06/06/2010 08:26:56.563783 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:26:56.812964 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:26:56, pid = 29214] 06/06/2010 08:27:06.814486 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:27:07.054854 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:27:07, pid = 29219] I've already tried following the instructions in the FAQ for increasing shared memory, but that doesn't seem to work. What do I need to do to get this working?

    Read the article

  • How to set orthgraphic matrix for a 2d camera with zooming?

    - by MahanGM
    I'm using ID3DXSprite to draw my sprites and haven't set any kind of camera projection matrix. How to setup an orthographic projection matrix for camera in DirectX which it would be able to support zoom functionality? D3DXMATRIX orthographicMatrix; D3DXMATRIX identityMatrix; D3DXMatrixOrthoLH(&orthographicMatrix, nScreenWidth, nScreenHeight, 0.0f, 1.0f); D3DXMatrixIdentity(&identityMatrix); device->SetTransform(D3DTS_PROJECTION, &orthographicMatrix); device->SetTransform(D3DTS_WORLD, &identityMatrix); device->SetTransform(D3DTS_VIEW, &identityMatrix); This code is for initial setup. Then, for zooming I multiply zoom factor in nScreenWidth and nScreenHeight.

    Read the article

  • Android Video Camera : still picture

    - by Alex
    I use the camera intent to capture video. Here is the problem: If I use this line of code, I can record video. But onActivityResult doesn't work. Intent intent = new Intent("android.media.action.VIDEO_CAMERA"); If I use this line of code, after press the recording button, the camera is freezed, I mean, the picture is still. Intent intent = new Intent(MediaStore.ACTION_VIDEO_CAPTURE); BTW, when I use $Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE); to capture a picture, it works fine. The java file is as follows: package com.camera.picture; import java.io.File; import java.text.SimpleDateFormat; import java.util.Date; import android.app.Activity; import android.content.ContentValues; import android.content.Intent; import android.net.Uri; import android.os.Bundle; import android.os.Environment; import android.provider.MediaStore; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.ImageView; import android.widget.Toast; import android.widget.VideoView; public class PictureCameraActivity extends Activity { private static final int IMAGE_CAPTURE = 0; private static final int VIDEO_CAPTURE = 1; private Button startBtn; private Button videoBtn; private Uri imageUri; private Uri videoUri; private ImageView imageView; private VideoView videoView; /** Called when the activity is first created. * sets the content and gets the references to * the basic widgets on the screen like * {@code Button} or {@link ImageView} */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); imageView = (ImageView)findViewById(R.id.img); videoView = (VideoView)findViewById(R.id.videoView); startBtn = (Button) findViewById(R.id.startBtn); startBtn.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { startCamera(); } }); videoBtn = (Button) findViewById(R.id.videoBtn); videoBtn.setOnClickListener(new View.OnClickListener() { @Override public void onClick(View v) { // TODO Auto-generated method stub startVideoCamera(); } }); } public void startCamera() { Log.d("ANDRO_CAMERA", "Starting camera on the phone..."); String fileName = "testphoto.jpg"; ContentValues values = new ContentValues(); values.put(MediaStore.Images.Media.TITLE, fileName); values.put(MediaStore.Images.Media.DESCRIPTION, "Image capture by camera"); values.put(MediaStore.Images.Media.MIME_TYPE, "image/jpeg"); imageUri = getContentResolver().insert( MediaStore.Images.Media.EXTERNAL_CONTENT_URI, values); Intent intent = new Intent(MediaStore.ACTION_IMAGE_CAPTURE); intent.putExtra(MediaStore.EXTRA_OUTPUT, imageUri); intent.putExtra(MediaStore.EXTRA_VIDEO_QUALITY, 1); startActivityForResult(intent, IMAGE_CAPTURE); } protected void onActivityResult(int requestCode, int resultCode, Intent data) { if (requestCode == IMAGE_CAPTURE) { if (resultCode == RESULT_OK){ Log.d("ANDROID_CAMERA","Picture taken!!!"); imageView.setImageURI(imageUri); } } if (requestCode == VIDEO_CAPTURE) { if (resultCode == RESULT_OK) { Log.d("ANDROID_CAMERA","Video taken!!!"); Toast.makeText(this, "Video saved to:\n" + data.getData(), Toast.LENGTH_LONG).show(); videoView.setVideoURI(videoUri); } } } private void startVideoCamera() { // TODO Auto-generated method stub //create new Intent Log.d("ANDRO_CAMERA", "Starting camera on the phone..."); String fileName = "testvideo.mp4"; ContentValues values = new ContentValues(); values.put(MediaStore.Video.Media.TITLE, fileName); values.put(MediaStore.Video.Media.DESCRIPTION, "Video captured by camera"); values.put(MediaStore.Video.Media.MIME_TYPE, "video/mp4"); videoUri = getContentResolver().insert( MediaStore.Video.Media.EXTERNAL_CONTENT_URI, values); Intent intent = new Intent("android.media.action.VIDEO_CAMERA"); //Intent intent = new Intent(MediaStore.ACTION_VIDEO_CAPTURE); intent.putExtra(MediaStore.EXTRA_OUTPUT, videoUri); intent.putExtra(MediaStore.EXTRA_VIDEO_QUALITY, 1); // start the Video Capture Intent startActivityForResult(intent, VIDEO_CAPTURE); } private static File getOutputMediaFile() { // TODO Auto-generated method stub // To be safe, you should check that the SDCard is mounted // using Environment.getExternalStorageState() before doing this. File mediaStorageDir = new File(Environment.getExternalStoragePublicDirectory( Environment.DIRECTORY_PICTURES), "MyCameraApp"); // This location works best if you want the created images to be shared // between applications and persist after your app has been uninstalled. // Create the storage directory if it does not exist if (! mediaStorageDir.exists()){ if (! mediaStorageDir.mkdirs()){ Log.d("MyCameraApp", "failed to create directory"); return null; } } // Create a media file name String timeStamp = new SimpleDateFormat("yyyyMMdd_HHmmss").format(new Date()); File mediaFile; mediaFile = new File(mediaStorageDir.getPath() + File.separator + "VID_"+ timeStamp + ".mp4"); return mediaFile; } /** Create a file Uri for saving an image or video */ private static Uri getOutputMediaFileUri(){ return Uri.fromFile(getOutputMediaFile()); } }

    Read the article

  • Handling Digital ID/Signature in Outlook Add-in

    - by CoSteve
    I have a C# Outlook Add-In application (VS2005 and 2003 Outlook) that reads incoming emails and strips out the attachments and the email text body for future processing. Occasionally I'll get an email that contains a digital signature. The application will fail when I try to access the mailitem.body property, throwing the following exception: System.Runtime.InteropServices.COMException (0xAB404001): The operation failed. at Microsoft.Office.Interop.Outlook._MailItem.get_Body() at MyLib.MyApp.OutlookAddin.MailProcessor.ProcessMailItem(MailItem mailItem) I'm pretty sure it is the digital signature causing the problem because if I forward the email back to myself, it will strip off the original sender's digital signature and the add-in application will process the email without any problems. I'm not sure what to do. I need to process the email, so I can't just ignore it. Somehow getting the body of the original email without throwing an exception would be ideal. Or I guess if I can identify that there is a digital signature associated with the email, I could forward the email to myself, but that seems a little messy. Does anyone have any suggestions/fixes? Thanks for any help.

    Read the article

  • Calculate the digital root of a number

    - by Gregory Higley
    A digital root, according to Wikipedia, is "the number obtained by adding all the digits, then adding the digits of that number, and then continuing until a single-digit number is reached." For instance, the digital root of 99 is 9, because 9 + 9 = 18 and 1 + 8 = 9. My Haskell solution -- and I'm no expert -- is as follows. digitalRoot n | n < 10 = n | otherwise = digitalRoot . sum . map (\c -> read [c]) . show $ n As a language junky, I'm interested in seeing solutions in as many languages as possible, both to learn about those languages and possibly to learn new ways of using languages I already know. (And I know at least a bit of quite a few.) I'm particularly interested in the tightest, most elegant solutions in Haskell and REBOL, my two principal "hobby" languages, but any ol' language will do. (I pay the bills with unrelated projects in Objective C and C#.) Here's my (verbose) REBOL solution: digital-root: func [n [integer!] /local added expanded] [ either n < 10 [ n ][ expanded: copy [] foreach c to-string n [ append expanded to-integer to-string c ] added: 0 foreach e expanded [ added: added + e ] digital-root added ] ] EDIT: As some have pointed out either directly or indirectly, there's a quick one-line expression that can calculate this. You can find it in several of the answers below and in the linked Wikipedia page. (I've awarded Varun the answer, as the first to point it out.) Wish I'd known about that before, but we can still bend our brains with this question by avoiding solutions that involve that expression, if you're so inclined. If not, Crackoverflow has no shortage of questions to answer. :)

    Read the article

  • the unity aspect ratio script looks good in computer but not in android phones

    - by Pooya Fayyaz
    I'm developing a game for android devices.and i have a script that solve the ratio problem but i have a problem in this code.and i dont know why.it looks perfect in computer even resize the game screen but in mobile phones have a problem.my game runs in landscape mode.this is the script : using UnityEngine; using System.Collections; using System.Collections.Generic; public class reso : MonoBehaviour { void Update() { // set the desired aspect ratio (the values in this example are // hard-coded for 16:9, but you could make them into public // variables instead so you can set them at design time) float targetaspect = 16.0f / 9.0f; // determine the game window's current aspect ratio float windowaspect = (float)Screen.width / (float)Screen.height; // current viewport height should be scaled by this amount float scaleheight = windowaspect / targetaspect; // obtain camera component so we can modify its viewport Camera camera = GetComponent<Camera>(); // if scaled height is less than current height, add letterbox if (scaleheight < 1.0f && Screen.width <= 490 ) { Rect rect = camera.rect; rect.width = 1.0f; rect.height = scaleheight; rect.x = 0; rect.y = (1.0f - scaleheight) / 2.0f; camera.rect = rect; } else // add pillarbox { float scalewidth = 1.0f / scaleheight; Rect rect = camera.rect; rect.width = scalewidth; rect.height = 1.0f; rect.x = (1.0f - scalewidth) / 2.0f; rect.y = 0; camera.rect = rect; } } } i figure that my problem occur in this part of the script: if (scaleheight < 1.0f) { Rect rect = camera.rect; rect.width = 1.0f; rect.height = scaleheight; rect.x = 0; rect.y = (1.0f - scaleheight) / 2.0f; camera.rect = rect; } and its look like this in my mobile phone in portrait: and in landscape mode:

    Read the article

  • How to make an object move again after being stopped by collision in Unity?

    - by Matthew Underwood
    I have a player object which position is always centered on the main camera's viewport. This object has a Rigidbody 2D, a box and circle collider. The player moves around a level, the level has a polygon collider attached. I move the camera until the object hits against the collider, which stops the movement of the camera by setting its speed to 0. The problem happens when I want to move the camera / player object away from the collider. As the speed is already at 0, it cannot move away from the collider. The script attached to the player object, checks for collisions and applies the speed to 0 on the main camera's test script. using UnityEngine; using System.Collections; public class move : MonoBehaviour { public float speed; public test testing; // Use this for initialization void Start () { speed = 10F; testing = Camera.main.GetComponent<test>(); } // Update is called once per frame void FixedUpdate () { Vector3 p = Camera.main.ViewportToWorldPoint(new Vector3(0.5F, 0.5F, Camera.main.nearClipPlane)); transform.position = new Vector3(p.x, p.y, -1); } void OnCollisionEnter2D(Collision2D col) { testing.speed = 0; } void OnCollisionExit2D(Collision2D col) { testing.speed = 10F; } } This is the script attached to the main camera; just a simple script that changes the camera's position. using UnityEngine; using System.Collections; public class test : MonoBehaviour { public float speed; public float translationY; public float translationX; // Use this for initialization void Start () { speed = 10F; } void FixedUpdate () { translationY = Input.GetAxis("Vertical") * speed * Time.deltaTime; translationX = Input.GetAxis("Horizontal") * speed * Time.deltaTime; transform.Translate(translationX, translationY, 0); } } The player object isn't kinematic and is a fixed angle, the colliders aren't triggers and the polygon collider isn't a trigger either. The player is the red square, the collider is the pink area. -- EDIT -- From the latest change the collider set up for the player So if the X speed was disabled. It wouldnt move into the side of the polygon colider which is good, but yet you couldnt move away from it. And moving down would move inside the colider.

    Read the article

  • glm quaternion camera rotating on wrong axis

    - by Jarrett
    I'm trying to get my camera implemented with a glm::quat used to store the rotation. However, whenever I do circles with the mouse, the camera rotates along the axis I am viewing (i.e. I think it's called the target axis). For example, if I rotated the mouse in a clockwise fashion, the camera rotates clockwise around the axis. I initialize my quaternion like so: void Camera::initialize() { orientationQuaternion_ = glm::quat(); orientationQuaternion_ = glm::normalize(orientationQuaternion_); } I rotate like so: void Camera::rotate(const glm::detail::float32& degrees, const glm::vec3& axis) { orientationQuaternion_ = orientationQuaternion_ * glm::normalize(glm::angleAxis(degrees, axis)); } and I set the viewMatrix like so: void Camera::render() { glm::quat temp = glm::conjugate(orientationQuaternion_); viewMatrix_ = glm::mat4_cast(temp); viewMatrix_ = glm::translate(viewMatrix_, glm::vec3(-pos_.x, -pos_.y, -pos_.z)); } The only axis' I actually try to rotate are the X and Y axis (i.e. (1,0,0) and (0,1,0)). Anyone have any idea why I see my camera rotating around the target axis?

    Read the article

  • Beginner video capture and processing/Camera selection

    - by mattbauch
    I'll soon be undertaking a research project in real-time event recognition but have no experience with the programming aspect of video capture (I'm an upperclassman undergraduate in computer engineering). I want to start off on the right foot so advice from anyone with experience would be great. The ultimate goal is to track events such as a person standing up/sitting down, entering/leaving a room, possibly even shrugging/slumping in posture, etc. from a security camera-like vantage point. First of all, which cameras/companies would you recommend? I'm looking to spend ~$100, more if necessary but not much. Great resolution isn't a must, but is desirable if affordable. What about IP network cameras vs. a USB type webcam? Webcams are less expensive, but IP cameras seem like they'd be much less work to deal with in software. What features should I look for in the camera? Once I've selected a camera, what does converting its output to a series of RGB bitmaps entail? I've never dealt with video encoding/decoding so a starting point or a tutorial that will guide me up to this point would be great if anyone has suggestions. Finally, what is the best (least complicated/most efficient) way to display video from the camera plus my own superimposed images (boxes around events in progress, for instance) in a GUI application? I can work on any operating system in any language. I have some experience with win32 GUIs and Java GUIs. The focus of the project is on the algorithm and so I'm trying to get the video capture/display portion of the app done cleanly and quickly. Thanks for any responses!!

    Read the article

  • Glitch when moving camera in OpenGL

    - by CG
    I am writing a tile-based game engine for the iPhone and it works in general apart from the following glitch. Basically, the camera will always keep the player in the centre of the screen, and it moves to follow the player correctly and draws everything correctly when stationary. However whilst the player is moving, the tiles of the surface the player is walking on glitch as shown: Compared to the stationary (correct): Does anyone have any idea why this could be? Thanks for the responses so far. Floating point error was my first thought also and I tried slightly increasing the size of the tiles but this did not help. Changing glClearColor to red still leaves black gaps so maybe it isn't floating point error. Since the tiles in general will use different textures, I don't know if vertex arrays can be used (I always thought that the same texture had to be applied to everything in the array, correct me if I'm wrong), and I don't think VBO is available in OpenGL ES. Setting the filtering to nearest neighbour improved things but the glitch still happens every ten frames or so, and the pixelly result means that this solution is not viable anyway. The main difference between what I'm doing now and what I've done in the past is that this time I am moving the camera rather than the stationary objects in the world (i.e. the tiles, the player is still being moved). The code I'm using to move the camera is: void Camera::CentreAtPoint( GLfloat x, GLfloat y ) { glMatrixMode(GL_PROJECTION); glLoadIdentity(); glOrthof(x - size.x / 2.0f, x + size.x / 2.0f, y + size.y / 2.0f, y - size.y / 2.0f, 0.01f, 5.0f); glMatrixMode(GL_MODELVIEW); } Is there a problem with doing things this way and if so is there a solution?

    Read the article

  • WPF Orthographic Camera. Region of view

    - by Evgeny
    Hello. I added Orthographic Camera to my project. I want to show my chart on screen proportional. For example height is 4 and width 4 (region from -2 to 2). I set width to 4 and it perfectly fit my square in widht. but i have problem with height. The chart top and bottom is always out of screen space. Why this happens and how to set to camera view the same width and height ? Camera position: 0,0,5 Viewport have size: 571.5x497 On image we can see on vertical axis points from 2 to -2 but on vertical much more. How to make them same? Image: http://i076.radikal.ru/1003/96/273c74ed9add.png Sorry for my English.

    Read the article

  • Western Digital My Book World drops off network

    - by Macha
    Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

    Read the article

  • 3½" PATA Western Digital Caviar SE (250MB) makes steady ticking sound when idle

    - by intuited
    I've started to notice a ticking sound emanating from my WD2500JB. It is not alarmingly loud. The sound seems to occur only when the drive has been idle for some time, and will cease upon (some?) disk activity. The sound has a regular, steady cadence of somewhere between about 4 and 6 ticks per second. I'm not entirely certain that it just started making these sounds, since I previously had the drive — mounted in a USB enclosure — stored out of earshot, and only recently moved it to where I can hear it. The SMART attributes for the drive do not indicate any problems. I did have some errors to clean up recently (since I started noticing the sounds). The errors occurred on an ext3 filesystem. The drive had been powered down while mounted a few times prior to that fsck. Is this cause for alarm? Should I scrap the drive on principle?

    Read the article

  • Western Digital not recognized by Windows after power Outage on windows

    - by vikasde
    I have WD Essential Plus 1.5TB (formatted in NTFS). It was working fine under windows and mac mini. While it was connected to the mac mini, I had an power outage and now the HD is not being recognized under windows anymore. Now on the mac mini the HD is fine and I can see my data. When I use ActiveBootDisk under windows, then I can see the data as well. I updated the drivers on windows machine and also updated the firmware on the HD, but its still not being recognized. Is there any way for me to fix the HD under windows without having to re-format it?

    Read the article

  • Western Digital Smartware not detect External HDD

    - by romilnagrani
    Hi people, i recently buy WD Mybook Essential HDD 1 TB. I downloaded and install Smartware software in both my desktop (windows xp) and laptop (Windows 7) but in both case the s/w is not able to detect the external hard disc. It shows desktop/laptop (Whichever is apt) on left hand side of software but not the hard drive on right side. Why so? i need to install smartware s/w as my friend had gave me which i suppose had deleted the software. please help me thanks

    Read the article

  • Camera Filters in ios7

    - by Muhannad Dasoqie
    How I can use the camera filters that already exist in iOS7? If i used this code: UIImagePickerController *picker= [[UIImagePickerController alloc]init]; picker.delegate = self; picker.allowsEditing = YES; picker.sourceType = UIImagePickerControllerSourceTypeCamera; [self presentModalViewController:picker animated:YES]; the camera will open, and I can capture a photo but without using the filters. my question is: can I use the exist filters in camera view in iOS7?

    Read the article

  • Digital signatures and encryption in GMail

    - by Antonio
    I just wonder if there is a way to use SSL certificates or PGP keys for signing my email. At the moment I have to setup S/MIME in Outlook (or another thick client) to send signed messages via SMTP. It works for me, but I'm looking for a way to do the same using GMail's web interface.

    Read the article

  • How to detect in a Flex app if a camera is already in use by another application?

    - by Alex Fisherr
    I am making an application that plays the video stream from the user's local system (both Windows and Mac). I use the Camera.getCamera() method and in turn Camera.names to get a list of camera attached with the system. Unfortunately, if the camera is already in use by another application, say a desktop application on user's system, the browser is crashed. Is there any way that I can detect if a specific camera from the list of available camera is already in use by any other application?

    Read the article

  • Western Digital Mybook is creating folders I didn't create

    - by Rogue
    I have a WD MyBook which has been creating empty folders with a long string of numbers and alphabets and some shorter ones with just some numbers with a 0kb file in it Some of these can be deleted but some just stay put. It's irritating to find new ones everyday and now i have a collection of them which don't delete is there any way to delete these ? Edit: I have scanned the drive using Antivirus and AntiMalware Software so i don't think it would have a virus One solution is copying all the matter elsewhere and formatting the hard disk but there is not guarantee that these folders wont reappear.

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >