Search Results

Search found 2344 results on 94 pages for 'ethernet'.

Page 9/94 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• OpenVPN Server Ethernet Bridging Question

  - by Hooplad

  Hello All, I am having a difficult time properly configuring an ethernet bridge using OpenVPN 2.0.9 install on CentOS 5 ( VPN server ). The goal that I am trying to complete is to connect a VM ( instance running on the same CentOS machine ) acting as a Microsoft Business Contact Manager server. I would then like this "BCM server" to serve Windows XP clients on 192.168.1.0/24 network as well as clients connecting from VPN ( 10.8.0.0/24 ). The setup as it is now was based off a known working configuration. The problem with the working configuration was that it would allow to the client to connect and access everything running on the VPN server ( SVN, Samba, VM Server ) but not any computers on the 192.168.1.0/24 network. I must disclose that the VPN server is behind a router/firewall. Ports are being forwarded correctly ( again, clients were able to connect to the VPN server with no problem. netcat confirms the udp port is open as well ). current ifconfig output br0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 inet addr:192.168.1.169 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:5eff:fe4d:3ac2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:846890 errors:0 dropped:0 overruns:0 frame:0 TX packets:3072351 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:42686842 (40.7 MiB) TX bytes:4540654180 (4.2 GiB) eth0 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C2 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:882641 errors:0 dropped:0 overruns:0 frame:0 TX packets:1781383 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:82342803 (78.5 MiB) TX bytes:2614727660 (2.4 GiB) Interrupt:169 eth1 Link encap:Ethernet HWaddr 00:21:5E:4D:3A:C3 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:650 errors:0 dropped:0 overruns:0 frame:0 TX packets:1347223 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:67403 (65.8 KiB) TX bytes:1959529142 (1.8 GiB) Interrupt:233 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:17452058 errors:0 dropped:0 overruns:0 frame:0 TX packets:17452058 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:94020256229 (87.5 GiB) TX bytes:94020256229 (87.5 GiB) tap0 Link encap:Ethernet HWaddr DE:18:C6:D7:01:63 inet6 addr: fe80::dc18:c6ff:fed7:163/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:3086 errors:0 dropped:166 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 b) TX bytes:315099 (307.7 KiB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01 inet addr:192.168.177.1 Bcast:192.168.177.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4224 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08 inet addr:192.168.55.1 Bcast:192.168.55.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4226 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) current route table Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.55.0 * 255.255.255.0 U 0 0 0 vmnet8 192.168.177.0 * 255.255.255.0 U 0 0 0 vmnet1 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 current iptables output Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination server_known_working.conf local banshee port 1194 proto udp dev tap0 ca ca.crt cert banshee_server.crt key banshee_server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt push "route 192.168.1.0 255.255.255.0" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 4 The following is the current CentOS server config file. server_ethernet_bridged.conf ( current ) local 192.168.1.169 port 1194 proto udp dev tap0 ca ca.crt cert server.crt key server.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.1.169 255.255.255.0 192.168.1.200 192.168.1.210 push "route 192.168.1.0 255.255.255.0 192.168.1.1" client-to-client keepalive 10 120 tls-auth ta.key 0 user nobody group nobody persist-key persist-tun status openvpn-status.log verb 6 The following is one of the client's config file that was used with the known working configuration. client.opvn client dev tap proto udp remote XXX.XXX.XXX 1194 resolv-retry infinite nobind persist-key persist-tun ca client.crt cert client.crt key client.key tls-auth client.key 1 verb 3 I have tried the HOWTO provided by OpenVPN as well as others http://www.thebakershome.net/openvpn%5Ftutorial?page=1 with no success. Any help or suggestions would be appreciated.

  Read the article

• System network service uncompatable after harddrive change and format

  - by NStephenH

  After changing out the hard drive in my dell optiplex 750, and reinstalling ubuntu, my computer tells me the system network services are not compatable. Because my cd drive does not work, I installed this by placing the hard drive in another computer an dusign the mini.iso to install it. I need networking capabilities becuase I want to use this computer as a web server. The on-board ethernet card is a intel 82566 something. If you need more information, and can tell me how to get it, just ask. Please help.

  Read the article

• 12.04 drops Wired Network if Wireless connects

  - by mitt10tim

  This is a little different then most of the questions I have seen here. When I am at my office I keep my Lenovo Thinkpad t61p running Ubuntu 12.04 x64 connected via wired Ethernet. I also typically leave the wireless radios on. After a recent update the behavior of laptop in regards to the networks has changed. It used to be that if the laptop had a wired connection, the wired would supersede the wireless. Now, when I get to work and plug the laptop in and power it up, it connects via wired (correct behavior), shortly after the wireless begins searching for its favorite network (also correct) but as soon as it finds a network to connect to, I lose Internet. If I disconnect from the wireless network, leaving the wireless radios powered on, and refresh the wired connection, all is well again. Powering down the wireless radios also corrects the problem. How can I set this up so that the wired network (if available) always has precedence over the wireless?

  Read the article

• how to connect to ethernet printer throught python?

  - by Prasanth

  How can i connect and send data to a Ethernet receipt printer Epson-T88V through python2.7, i have set the ipaddress of the Ethernet printer manually and the utility software communication is also successful. How do i detect and connect to these printers and send data to print. Is there and module for Ethernet connection in python. Using more than one Ethernet printer and separate data to be printed simultaneously from a single system, i am using windows xp and python 2.7 hope i am clear Thanks.

  Read the article

• Hyper-V Virtual Ethernet Adapter not working probperly - Code 31 on Host

  - by Chris S

  I have a Windows 8.1 machine with Hyper-V installed. From a "clean" Hyper-V configuration I open Virtual Switch Manager, create an External switch with "Allow management operating system to share this network adapter", click OK. Everything seems to work properly but the host loses network connectivity. Opening Device Manager, the "Hyper-V Virtual Ethernet Adapter" is shown under the Network Adapter section with a yellow triangle, and the following message: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31) An object ID was not found in the file. I tried "Uninstalling" the device, seems to work, but the device doesn't actually remove. I tried removing and re-adding the Hyper-V feature completely, no difference. Tried scf /scannow, no problems. System and Application logs show no errors. The Hyper-V-VMMS Networking log shows the following: Log Name: Microsoft-Windows-Hyper-V-VMMS-Networking Source: Microsoft-Windows-Hyper-V-VMMS Date: 10/24/2013 10:53:07 AM Event ID: 26088 Description: Failed to apply static IP settings to internal Ethernet adapter {A813DE9A-BE70-4FAE-AD31-BE4D54505A4B} ('885435B8-BE65-4EE9-826D-AB56035237ED'): Unspecified error (0x80004005). If I try to remove the Virtual Switch in Hyper-V Virtual Switch Manager I get this in that same log: Log Name: Microsoft-Windows-Hyper-V-VMMS-Networking Source: Microsoft-Windows-Hyper-V-VMMS Date: 10/24/2013 11:19:47 AM Event ID: 26142 Description: Failed while removing virtual Ethernet switch. Trying to remove the Virtual Switch leads to an error: Error applying Virtual Switch Properties changes Failed while removing virtual Ethernet switch. VM Networking does work.

  Read the article

• Fast Ethernet module for Cisco 2620

  - by Kenny Rasschaert

  I have a Cisco 2620 Router. It comes with one fast ethernet port built in (circled in red), and one old AUI ethernet module is installed (circled in blue). I figure I can put a transceiver on the AUI interface to get a second RJ45 connector. What I'd really like to have is a second fast ethernet connector. The ideal candidate to achieve this would be the NM-1FE-TX module. Cisco claims on their website that this module is not suitable for the Cisco 2620 and Cisco 2620XM. It says so in "Table 2 Physical Limitation of Serial Modules per Chassis". Indeed, this module was designed for the 3600 series of routers. I've seen claims on the internet, however, of people having this module on a 2620XM, and it being fully functional. This claim gains some credibility because of the fact that in Cisco's own Packet Tracer software, you can install this module on the 2620XM router. I'm looking for a definitive answer. Will this module work on a Cisco 2620? Is there perhaps another way to get a second fast ethernet port on this device?

  Read the article

• Portable, battery-powered, wireless access point, ethernet adapter

  - by Jed

  I am in need of an adapter that will convert an ethernet port into a wireless access point. I have found a handful of devices, but I'm unable to find a device that is battery powered. Does a self-powered wireless access point even exist? The particular scenario that I will be using the device for is not your typical computer/PC scenario. For the curious, here's a bit of background on the problem I'm trying to solve: I make devices (controllers) that monitor water systems. Our controllers have a Webserver that serves out web pages so that users can configure the controller's settings. Typically, the user will use a cross-over cable to connect directly to the controller's ethernet port with their laptop to gain access to the controller's web pages. Now that tablets (devices that don't have an ethernet port - iPad, for example) are becoming more common, I need to find a device that will convert the controller's ethernet port into a wireless access point so that the user can connect to the controller's web pages via Wi-Fi or Bluetooth. It's worth noting that this wireless device that I'm looking for will NOT be permanently installed on the controller. It will be a portable device that the user will use on any of his controllers when he needs to make a connection to the controller. If you know of a device that will solve the scenario that I mention above, please share your info.

  Read the article

• Cat 6 Only 100mbit speed

  - by Stu2000

  I tried two different cat6 cables directly connected between my two ubuntu machines. This one I ordered online: http://www.amazon.co.uk/gp/product/B002SQPDXS/ref=wms_ohs_product only achieves 100mbit speeds, but does appear to be supporting cross-talk (direct pc to pc), the other cat 6 cable, worked perfectly and gets the full 1gigabit speed. Both tests were performed using ftp and checking the network monitor with direct pc to pc connection. Did the product from amazon lie to me or do I need to manually set a setting somewhere in ubuntu for some cables? I had thought 10 quid for 20m of gigabit ethernet cable was a bit cheap, you get what you pay for... Regards, Stu Update: It seems that after rebooting, the device is set to 1000mbit sec when looking it up with sudo ethtool eth0 However after a while, this will drop down to just 100, after which to reset it to 1000 again, I have to reboot, and simply unpugging and re-plugging in the cable doesn't do it. I tried setting this in networking config file as suggested here: auto eth0 iface eth0 inet static pre-up /usr/sbin/ethtool -s eth0 speed 1000 duplex full but that resulted in my networking failing to start. Is there a problem with my 'auto-negotiation' or something? Can I manually override a setting to 1000mbit?

  Read the article

• can't get a good install:11.10 server

  - by jack

  I screwed up my partitioning aparently tring to get lvm and raid1 going. the machine is an intel dual core dt with 2 gig of ram and 2 sata drives, one 250g and the other 500g. This a build for my school in n.e. Thailand. we have 20+ clients now, a website, email. Our old server is dying fast and we are going to add another 12 stations next week. I really need some help here! 1. have onboard gigabit ethernet that aparently uses same driver as realtek 811c. I installed a pcie gigabit card also 811c. At several points the eth0 has accessed the internet fine, but the eth1 will not communicate. 2. I saw a "fix" for this online which from root: rmmod r8169. this imediately killed the working onboard card. 3.I tried to re-install 11.10 figuring that would re-install r8169. However I messed something up in my partitioning and can't get a clean boot now. 6. so I think after 12 re-installs or so and 2 days. I can get through it right if I can start over with clean drives, but I can't figure out how to empty them out what with soft raid and lvm partitions. seems like i've had it going well and then trying to fix that one little problem, i go backwards.Please help! please send email.-thanks

  Read the article

• Wired connection to windows ISC stopped working

  - by cmpickle

  I have had my Linux box connected to the internet through a Windows computer by wiring them together with a cat5 cable then the Windows is connected wireless to a router. This setup has worked since I got the Linux box but just yesterday stopped working. The changes that occurred were: I changed networking so that I was connecting the Linux box and Windows computer through a second router so during that time the Linux box went through a router to connect to the Windows computer that was still connected wireless to the first router. The Internet didn't work on the Linux box at the time they second router was involved when I removed it and directly connected the Linux box and Windows the Internet worked again. Another thing that changed was that I had disconnected my Windows computer from all network connections and deleted them to make my Ethernet work better. Also at that time my dad had I connect the Windows to a third router and changed some settings in it. After reconnecting this time the connection between the router and the windows would not establish. If anyone has any ideas as to why this is I would greatly appreciate it!

  Read the article

• How to make ip Address static (eth0)

  - by Jordan Angelucci

  I'm having a really hard time configuring ubuntu 13.04 to have a static ip address. I have tried multiple solutions but everytime I reboot (can't do the network reset command because ubuntu freezes) I end up with no connection. Here is what I get when i type ifconfig into the terminal: eth0 Link encap:Ethernet HWaddr 10:bf:48:bc:07:cb inet addr:192.168.0.8 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::12bf:48ff:febc:7cb/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1763067 errors:0 dropped:0 overruns:0 frame:0 TX packets:1024326 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2284491220 (2.2 GB) TX bytes:136809317 (136.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:1840 errors:0 dropped:0 overruns:0 frame:0 TX packets:1840 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:185688 (185.6 KB) TX bytes:185688 (185.6 KB) I have also tried this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.160 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 dns-nameservers 24.222.0.94 dns-nameservers 24.222.0.95 If anyone could help me it would be very much appreciated.

  Read the article

• Is that possible to share pc speaker among PC over ethernet?

  - by Chau Chee Yang

  I have few PC in same LAN. Only one PC has speaker. I want to play music from another PC but I want the sound to play out on the only PC that only has speaker via LAN. Is that possible to do so?

  Read the article

• How do I choose which Ethernet Adapter to bridge in VMPlayer

  - by Catherine MacInnes

  I am running vmplayer 3.1.0 on Ubuntu. The host machine has four ethernet adapters that are configured to run on four different subnets. I need to run four VMs each with a single ethernet adapter bridged onto a specific one of the physical ethernet adapters. Does anyone know how to do this? Am I simply exceeding the capabilities of vmplayer and have to go to one of the other vmware products, if so, which one. Note that I have no need to create additional VMs, these are VMs that are being given to me by companies that want us to develop software for their products.

  Read the article

• How to connect laptop with telephone using WI-FI? (ethernet)

  - by rmaster

  What I did: 1)added new wireless network in wireless network settings and gave it SSID 2)gave laptop the IP like 192.168.0.1, mask: 255.255.255.0, gateway: 192.168.0.2 3)gave the telephone with wifi the same mask but IP and gateway rewersed But telephone can not find my new wireless network(it can find all other networks), computer also can not find it. where is error? how to make it visible and working? if my steps are wrong tell me correct way to establish this connection via wi-fi

  Read the article

• House Wiring for Ethernet/Coax/Power

  - by Adam Kragt

  Hoping this is the right place to post, the rest didn't seem to fit. If not, I apologize. Remodeling my house and want to wire up each room with Ethernet/coax wall ports. Both Ethernet, coax and power will be running through the sub-floor. I've read that there needs to be 2 ft between power cables and Ethernet to limit/prevent interference. Is this true? If not, does anyone know what the distance is? Thanks!

  Read the article

• Bonding: works only for download

  - by Crazy_Bash

  I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

  Read the article

• High number of ethernet errors. Tool for testing the ethernet card?

  - by Fabio Dalla Libera

  I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

  Read the article

• Switching between ethernet interfaces on Ubuntu 10.04 SERVER

  - by Chaitanya

  I have ubuntu 10.04 "SERVER" installed on a system with two ehternet ports. I use only one at a time. I wanted to know if I can switch between ports without using ifup and ifdown every time. That means when I connect my Lan cable on eth0 it should work and it does. But when I disconnect the lan cable and connect it on eth1 I have to ifdown eth0 and only then it works. In my /etc/network/interfaces file I have configured both eth0 and eth1. there is no problem other than I have to switch it manually with ifdown and ifup everytime. Please guide. Thanks in advance

  Read the article

• Using two ethernet connections (Internet enabled) simultaneously

  - by vedarthk

  I have searched and read over the Internet and also on askubuntu. i am using Ubuntu 11.04 and my question or the thing that I want to achieve is efficient use of both the connections and thus increasing my browsing and downloading speed. I want my system to decide which packet should be routed over which interface. I want to know if this is possible. For example, Is it possible to route alternate packets over the two interfaces ? Please let me know any Internet resource or If I would have to insert any code into the network drivers etc. ?

  Read the article

• Configuring ethernet network

  - by den-javamaniac

  Hi. I've got a wired network connection and if I'm using network manager (hereafter "NM") everything works fine except for the hardware address (it doesn't change). I'm thinking of using /etc/network/interfaces. So, I added some code and it looks like this: auto lo iface lo inet loopback auto eth1 iface eth1 inet static address #corresponding value netmask #corresponding value gateway #corresponding value hwaddress #corresponding value After restarting networking I get the following message: *Reconfiguring network interfaces... #here some help code appears Failed to bring up eth1. The default interface that works with NM is eth0. Please advise on how to handle the problem.

  Read the article

• Switch between network configurations via command line in fedora 17

  - by Mike Fairhurst

  I have two different setups I use on my work laptop; one enables synergy over an ethernet ssh tunnel with my work computer on the local network, and the other opens an HTTP tunnel to my work computer from outside the network. When I have wifi enabled at work, my laptop seems to use it by preference. This makes synergy run incredibly slowly. At home I must use wifi. I have scripts that begin my ssh tunnels, add my ssh keys, and starts up other programs like synergy, and close themselves when I shut my laptop. However, every day I have to start out my routine by opening my gnome-control-center and turning on my ethernet. I have tried route add and ifup, none of it works, so I dove into gnome-control-center's source code and found that it enabled the connection by libnm's method nm_client_activate_connection with some libnm specific structs that I am having trouble tracking down. I'm not much of a c programmer, and I'm not familiar with either GTK or libnm. Does anybody know what fedora 17 does with ethernet connections to fully enable them? Or does anybody know what libnm does to fully enable an ethernet connection? Do I have to write a c script to run libnm for me to fully emulate whatever gnome-control-center is trying to do?

  Read the article

• Networking OSX 10.6 and Vista via ethernet?

  - by Moshe

  How can I make Vista home premium access OS X hard drive? and the other way around? I'd like to transfer files via direct ethernet. Plugging in an ethernet cable makes both computers recognize a network, but not the other device. Each firewall is turned off, but no luck. Edit: I don't see Windows Sharing in the Service Column.

  Read the article

• Computer sending data while turned of

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

  Read the article

• can not access dlink 604 set up interface

  - by user36089

  Hello everyone I used dlink-di604 enthernet board as router to share web access. My ISP provides the service base on Ethernet rathern than base on Ethernet pppoe mode. It is manually setup ipv4, subnet mask , DNS, Gateway etc Log in using web user name&password. I use http://192.168.0.2 try to access dlink di604 setup inferface, but failed I call command ipconfig /all Dos shell displayed: Ethernet adapter Local Connection: Physical Address: 00-3c-56-79-19-49 IPv4 address:10.7.8.225 subnet mask: 255.255.255.0 default gate way: 10.7.8.1 DNS servers 10.10.10.10 What is the correct way to access dlink 604 setup interface and set to share web access? Welcome any comment Thanks interdev

  Read the article

• Simple way to make wired internet wireless without router

  - by Anriëtte Combrink

  Hi there Is there any device which you can plug into an Ethernet port and then have it broadcast the internet connection it receives through Ethernet wirelessly with a set password (maybe a serial number on device itself)? The problem is, I have a Wi-fi capable device, an iPhone and I want to use the wired internet connection in a hotel room, but the iPhone needs a Wi-fi signal. How can I accomplish this with a rather simplistic device. // EDIT: Can this be achieved with an Apple Airport Express?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >