Search Results

Search found 1360 results on 55 pages for 'is it plugged in'.

Page 9/55 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Linux (lsusb) not showing String Descriptors of a USB device

  - by tzippy

  I have an embedded device that when plugged to a linux host, shows up with vid and pid that are not in the usb.ids file (proprietary IDs). However I provide String Descriptors that do show up when plugged into a Windows Host. But not on a Linux Host. lsusb -v shows only iManufacturer 3 iProduct 2 iSerial 1 But on the device side, when processing the setup requests, I see that the Strings are actually requested by the Host. By Windows and also the Linux Host. The USB Device Tree Viewwer under Windows shows this output: iManufacturer : 0x01 Language 0x0409 : "My Manufacturer" iProduct : 0x02 Language 0x0409 : "MyProduct" iSerialNumber : 0x03 Language 0x0409 : "My Serial" I feel that lsusb does not show all of the information. Is there a more informative tool?

  Read the article

• can power supply affect I/O

  - by user101289

  I have a dev server machine running Ubuntu 12.04. For a long while it's been throwing intermittent errors where it would suddenly tell me "File system is read only" or drop into a GRUB error console on boot. I've done disk checks, bad blocks, etc. and no real problems with the main SATA drive were detected. Finally the drive would not be detected at all-- but neither would other drives I plugged in (via SATA). I plugged the supposedly "bad" drive into another server and it worked fine, no issues, for days-- so I assumed the motherboard had a bad SATA controller, and replaced the motherboard with an identical model. I replaced the drive into the original machine with the new motherboard, rebooted-- and the same issues-- I/O errors, failure to read the drive at all, dropping into GRUB, etc. I'm wondering if there could be some other issue with this machine, that's not related to the drive-- possibly power supply? Thanks for ideas

  Read the article

• How to fix a Corrupted USB

  - by Help

  My USB stick has suddenly stopped working. It's a Busbi 4GB. My USB used to be G:/ but as soon as I plugged it in, I used to get a pop up box showing that it was plugged in. Now, when I plug this in, it shows as I:/ and no pop up box appears. It shows in my computer as I:/ and when I click to open it says I:/ is not accessible the disk structure is corrupted and unreadable. I have tried to change the file name back to G:/ but nothing happened (this was under disk management). On disk management, it shows Volume as I:/ Layout simple Type Basic File system RAW status Healthy (Active,Primary partition) Capacity 3.42GB. I've tried right clicking properties then the tab tools and click error checking (this option will check the volume for errors). When I click "check now" it comes up with the disk check could not be performed because Windows cannot access the disk.

  Read the article

• Asus Eee-PC 1015PEM

  - by Bianka

  My Asus worked perfectly until yesterday. I assume that the battery drained and AC was not plugged. I turned it on and doesn't chargeat all. It seems that something wrong with my battery. It works from AC but when it is plugged it shows only 4% available charging. When I unplug AC it shuts down right away. I already tried the 45 seconds holding power button method, and I uninstalled in device manager Microsoft ACPI-compliant Method Battery. Nothing helped. Does anybody has any idea?

  Read the article

• How to make fonts look better on the mac?

  - by Another Registered User

  After I plugged in an external monitor, suddenly my Xcode fonts look really bad. It's like if font's are not antialiased very well. I have a 15" unibody MacBookPro. The monitor resolution is set to 1440 x 900 pixels. I am very sure font's looked better BEFORE I plugged in that external monitor. At least, suddenly I feel they are bad. Something happened... A restart didn't help. Is there an setting that affects how text is rendered?

  Read the article

• External microphone not working

  - by haireefairee

  gnome-volume-control does not recognise external hardware. My headphones work nonetheless, but an external microphone does not. External microphones used to work, but at times were temperamental - I would have to login or logout with or without microphone plugged in. I am running Ubuntu 10.04 LTS (Lucid Lynx) on an mSi U100 wind notebook with one Intel soundcard and trying to use a jack microphone which has worked previously. USB microphones have also been problematic. I have done the basics: Installed upgrades. Checked nothing is muted. Looked for the device on gnome-volume-control. Tried using a different microphone that works on a friends computer. Tested my microphone works when using a different computer. Checked my soundcard can be seen (cat /proc/asound/cards). I have done more complicated things: I have tried playing around with settings in alsamixer. Nothing is muted. I can adjust "mic" and "internal mic" regardless of whether an external microphone is plugged in. I have the choice of input source from "mic", "front mic", "line" and "CD". I've played around changing this and it hasn't helped. I only have one CAPTURE option. In gnome-sound-recorder I have the choice of line, microphone 1 and microphone 2. I have played around changing this option. None of these pick up sound from the external microphone. Microphone 2 is the microphone on my laptop which is bad quality. In gnome-sound-recorder I have the choice of different profiles, and changing this has not helped either. I have looked at gstreamer-properties but none of that seemed helpful. I don't know if there a way to check if these external devices are being picked up. I would like to make an external microphone work. Please help!

  Read the article

• [MINI HOW-TO] Repair Missing External Hard Drive Database Error in WHS

  - by Mysticgeek

  If you’re using external hard drives with your Windows Home Server, they might get unplugged and create an error. Here we look at running the Repair Wizard to quickly fix the issue. If an external drive that is included in your drive pool becomes unplugged or loses power, you might see the following error under Home Network Health when opening the WHS Console. To fix the issue verify the drive has power and is plugged in correctly and click Repair. The wizard launches and you’ll need to agree that you may lose data during the repair of the backup database. In this example it was a simple problem where an external drive became unplugged from the server…so you can close out of the wizard. If you look under Server Storage you can see the drive is missing…To fix the issue verify the drive has power and is plugged in correctly. WHS will add the drive back into the pool and when finished you’ll see it listed as healthy and good to go. Using external drives that are part of your storage pool may not be the best way to have your home built WHS setup, but if you do, expect occasional errors such as this. Similar Articles Productive Geek Tips Find Your Missing USB Drive on Windows XPFixing "BOOTMGR is missing" Error While Trying to Boot Windows VistaSpeed up External USB Hard Drives in Windows VistaRebit Backup Software [Review]Troubleshoot Startup Problems with Startup Repair Tool in Windows 7 & Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

  Read the article

• winusb formatting and installation error, lost data storage on 32gb flash drive

  - by Cary Felton

  i recently purchased a pny brand 32gb usb drive to use for configuring a dual boot on my computer, and for hdd files backup. i also recently installed zorin os 6.1 as my main os, and then downloaded winusb for linux, and set it to install the iso for windows 8 release preview as the activation code is still good untill jan.2013, and there was an error on the installation. i rebooted the computer, plugged in the usb drive, and i went from 32gb usable space to somehow having a partitioned drive (mounted as two separate drives) one being 3.7gb, and the other being i believe 25gb or so... i then formatted the drive with gparted back to fat32, and it still read as a windows usb with the installation files on it still? so then i took my usb drive to my library which runs windows 8, i installed bootice, and completely reformatted my usb drive, and somehow it is usable, but still not perfect. it reads i only have 29.9gb usable space... i have already thought of the non usable area, and that doesnt account for this error as when i first bought the drive and plugged it in on linux, it read total drive space was 32.2 and exactly 32 was usable. somehow i am short by 2gb of space which is very critical for what i am doing. i love linux, i only needed windows for bluray playback with daplayer as it wont work well in wine, but if i keep losing space on my usb drives im afraid ill have to switch back. any help would be appreciated as i already visited pny's site, and they have no support for this issue, and im not that fond of partitions, file systems, or formatting.

  Read the article

• Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

  - by vivi

  I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

  Read the article

• SD Card only mounted after a reboot

  - by hattenn

  I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Oracle Virtual Desktop Client with USB smart card reader

  - by wim.coekaerts

  I have my Sun Ray thin client at home which I use religiously, I use a Sun Ray 3i at work as my main desktop and just always take my smart card home and happily continue with the hot desking feature. We released a software version of the Sun Ray client called Oracle Virtual Desktop Client (OVDC). There is a version for Windows, Linux and Mac OS X. I have a minimac at home and I installed OVDC on it, which of course works great but since I like to re-connect to my session that I use at work, I wanted to try out the external usb smart card reader feature. I ordered a cute, low cost device online and tried it out. As expected, it worked out of the box without -any- configuration. I took the device, plugged it into my minimac, started OVDC, plugged in my smartcard and I got the password screen (screensaver) to get into my sun ray session on my server at work. Nothing new here, this is a feature that's been in the product but I had never tried it before and it works out of the box and is super easy and I just felt like sharing :-) Here are a few pictures : (1) login screen (2) smart cardreader without card (3) password screen (4) smart card reader with card

  Read the article

• External monitor problems with Asus UX32VD in 12.04

  - by rsilva

  I've posted this video where I show one of the problems I'm facing with my UX32VD in regard of external monitors. As you can see as soon as I plugged the external monitor the laptop screen goes black and the external monitor displays a single color (color changes between red, green and blue). However this does not always happen. For instance if I reboot the laptop with the external monitor already plugged in I get to use it but not the laptop screen. In the Displays settings the laptop screen it's not even listed. Other times it just works. The to screens, without any problems. I tried with other to different external monitor and all this apparently random issues repeat, I even tried using HDMI cable instead. Same random behavior. This question seams to cover one of this issues however the answer did not helped me. I was forced to use the 3.5.2 kernel in order to use the Intel graphics card else the Gallium something was used. Also I've Bumblebee installed.

  Read the article

• Latest update to Ubuntu 13.10 broke Intel graphics drivers

  - by James Davies

  I'm running a copy of Ubuntu 13.10 on an i7-4771 w/ Intel HD4600 Graphics using a Dell Ultrasharp 1440p monitor via Displayport. Up until today this configuration has been working perfectly, however the latest update appears to have broken my graphics configuration, and xorg is now refusing to go above 1280p resolution. Running xrandr it appears the driver incorrectly thinks my monitor is plugged into the HDMI port and is detecting a max resolution of 1920x1200 instead of 2560x1440. (It's actually plugged in via Displayport). Based on the apt history.log, the latest update was for the kernel. I'm presuming the issue is that the official Intel driver hasn't been updated to support this version? Is there any way to resolve this, or will I need to upgrade to 14.10 to get the latest driver from Intel? Start-Date: 2014-05-28 11:30:57 Commandline: aptdaemon role='role-commit-packages' sender=':1.473' Install: linux-image-extra-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-image-3.11.0-22-generic:amd64 (3.11.0-22.38), linux-headers-3.11.0-22:amd64 (3.11.0-22.38), linux-headers-3.11.0-22-generic:amd64 (3.11.0-22.38)

  Read the article

• Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

  - by user42424

  So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

  Read the article

• SD Card only mounted after a reboot

  - by evothur

  Hi everyone. I have a Kingston 2GB MicroSD and I plug it in via an inconix MicroSD Adapter to the internal card reader of my Samsung N210 Netbook with Ubuntu 10.10, but it doesn't show up. Only if I reboot the system when the card's plugged in it shows up. Why does it need a reboot for mounting? sudo fdisk -l gives the output below. But I can only see the drive when I reboot the computer while the card's plugged. Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9a5a7990 Device Boot Start End Blocks Id System /dev/sda1 1 1959 15728640 27 Unknown Partition 1 does not end on cylinder boundary. /dev/sda2 * 1959 1972 102400 7 HPFS/NTFS /dev/sda3 1972 18992 136718750 83 Linux /dev/sda4 18992 19458 3738625 5 Extended /dev/sda5 18992 19458 3738624 82 Linux swap / Solaris Disk /dev/sdb: 1973 MB, 1973420032 bytes 60 heads, 59 sectors/track, 1088 cylinders Units = cylinders of 3540 * 512 = 1812480 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 1089 1927100+ 6 FAT16

  Read the article

• Hard drive clicking noise on Acer AO722

  - by Blank

  I'm running Ubuntu 11.10 on an Acer Aspire One 722. Whenever I'm on battery power I get a clicking sound from my hard drive every 5 seconds or so (this does not happen when the laptop is plugged in). I'm dual booting with Windows 7 and I don't get the clicking sound in Windows. The clicking sound stops when I run the command:sudo hdparm -B 254 /dev/sda Also, according to:sudo smartctl -H /dev/sda my hard drive is healthy. Is this clicking sound something I can just ignore? Or is it a serious problem and will it eventually damage my computer? If so, how would I fix it? I have tried adding hdparm -B 254 /dev/sda to my /etc/rc.local file, but I still run into the clicking problem if my computer boots while plugged in and is then unplugged. Also, I'm finding this fix to be unreliable. Sometimes it works, sometimes it does not. Is this a good solution and is there a better way of doing this? Also, would running my laptop with a -B value of 254 have any negative effects? (I read somewhere about a lower level protecting the hard drive from bumps)

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• BASH, multiple arrays and a loop.

  - by S1syphus

  At work, we 7 or 8 hardrives we dispatch over the country, each have unique labels which are not sequential. Ideally drives are plugged in our desktop, then gets folders from the server that correspond to the drive name. Sometimes, only one hard drive gets plugged in sometimes multiples, possibly in the future more will be added. Each is mounts to /Volumes/ and it's identifier; so for example /Volumes/f00, where f00 is the identifier. What I want to happen, scan volumes see if any any of the drives are plugged in, then checks the server to see if the folder exists, if ir does copy folder and recursive folders. Here is what I have so far, it checks if the drive exists in Volumes: #!/bin/sh #Declare drives in the array ARRAY=( foo bar long ) #Get the drives from the array DRIVES=${#ARRAY[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points #I plan to use AFP eventually, but for the sake of ease #using a local mount. ServerMount="BigBlue" #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #Loop through each item in the array and check if exists on /Volumes for (( i=0;i<$DRIVES;i++)); do dir="$BaseDir/${ARRAY[${i}]}" if [ -d "$dir" ]; then echo "$dir exists, you win." else echo "$dir is not attached." fi done What I can't figure out how to do, is how to check the volumes for the server while looping through the harddrive mount points. So I could do something like: #!/bin/sh #Declare drives, and folder location in arrays ARRAY=( foo bar long ) ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) #Get the drives from the array DRIVES=${#ARRAY[@]} SERVERFOLDER=${#ARRAY1[@]} #Define base dir to check BaseDir="/Volumes" #Define shared server fold on local mount points ServerMount="BigBlue #Define folder name for where files are to come from Dispatch="File-Dispatch" dir="$BaseDir/${ARRAY[${i}]}" #List the contents from server directory into array ARRAY1=($(ls ""$BaseDir"/"$ServerMount"/"$Dispatch"")) echo ${list[@]} for (( i=0;i<$DRIVES;i++)); (( i=0;i<$SERVERFOLDER;i++)); do dir="$BaseDir/${ARRAY[${i}]}" ser="${ARRAY1[${i}]}" if [ "$dir" =~ "$sir" ]; then cp "$sir" "$dir" else echo "$dir is not attached." fi done I know, that is pretty wrong... well very, but I hope it gives you the idea of what I am trying to achieve. Any ideas or suggestions?

  Read the article

• IntelliJ IDEA :: Deploy android application onto Samsung S5300

  - by jdevelop

  I'm trying to deploy the app onto my phone (Samsung S5300) I created project in IDEA and it works well in Android emulator. Now I want to deploy it onto my phone. I did the following: plugged USB enabled development mode and checked all options (USB, location etc) on the phone launched the same configuration but specified the device from the plugged devide (choose a running device) nothing happened, I don't see any errors neither in IDEA, not on the phone. What am I missing and how to fix the problem? The API SDK seems to be correct (2.3)

  Read the article

• VB.Net: Detect Webcam

  - by Ben

  How can I programmatically detect whether a webcam device is plugged in to the PC or not, return 'True' or 'False.

  Read the article

• Shell script to name videos on device

  - by Jordan

  I have a .sh script that automounts any usb device that is plugged in. I need it to also find if there are videos in a certain location on the device that is plugged in then write them to a videos.txt file. Here's what I have and its not working. Also I need it to put the mountpoint in the videos.txt file. ${MOUNTPOINT}$count is the path to the mounted device. VIDEOS=ls ${MOUNTPOINT}$count/dcim/100Video | grep mp4 if [ "$VIDEOS" -ne "" ] ; then "${MOUNTPOINT}$count" > ${MOUNTPOINT}$count/videos.txt; "$VIDEOS" >> ${MOUNTPOINT}$count/videos.txt; fi What am I doing wrong?

  Read the article

• Where are the really high quality and complex Swing components?

  - by jouhni

  Looking at Swing, I have the feeling that it comes with many useful and reasonable atomic components in its core. And when I look at the Web there are hundrets of quickly plugged together components (among them many date/time pickers, pimped lists and tables), which have in common that I could easily write them on my own, if I needed them. When I build big software and come to the point where I need a domain-specific component which is really big, I mostly come to the point where I have to write it on my own, which, due to the point that they are not just plugged together lists and tables, isn't done qickly. So, the question is, why are there no Swing component galleries which contain more than just customized date/time pickers or lists with added tree support. Where are the components which really raise the level of abstraction, or are in best case domain-specific?

  Read the article

• Trying to prevent Windows from hibernating/sleeping automatically

  - by user328821

  My Dell XPS 8700 (Win 7) suddenly began putting itself to sleep at 6pm daily, even if I'm typing. I don't know what caused this to occur, except possibly a windows update that took place in the middle of the night. I initially went into settings for power and saw 2 plans set up, one from Dell and the other window's Power saver plan. I set both to never for sleep and hibernate yet it still occurred. I have current drivers and a fairly new UPS that has software to set to shutdown only after power loss. Dell is of little help, can anyone point me in the right direction? I did do the powerdfg -energy program and came up with this: Power Efficiency Diagnostics Report Scan Time 2014-05-08T19:21:48Z Scan Duration 60 seconds System Manufacturer Dell Inc. System Product Name XPS 8700 BIOS Date 08/23/2013 BIOS Version A04 OS Build 7601 Platform Role PlatformRoleDesktop Plugged In true Process Count 115 Thread Count 1631 Report GUID {097caf99-039b-44c3-b154-d797bfbfdfcc} Analysis Results Errors Power Policy:Sleep timeout is disabled (Plugged In) The computer is not configured to automatically sleep after a period of inactivity. System Availability Requests:System Required Request The device or driver has made a request to prevent the system from automatically entering sleep. Requesting Driver Instance HDAUDIO\FUNC_01&VEN_10EC&DEV_0899&SUBSYS_102805B7&REV_1000\4&220b1bbc&0&0001 Requesting Driver Device Realtek High Definition Audio CPU Utilization:Processor utilization is high The average processor utilization during the trace was high. The system will consume less power when the average processor utilization is very low. Review processor utilization for individual processes to determine which applications and services contribute the most to total processor utilization. Average Utilization (%) 9.48 Warnings Platform Timer Resolution:Platform Timer Resolution The default platform timer resolution is 15.6ms (15625000ns) and should be used whenever the system is idle. If the timer resolution is increased, processor power management technologies may not be effective. The timer resolution may be increased due to multimedia playback or graphical animations. Current Timer Resolution (100ns units) 10000 Maximum Timer Period (100ns units) 156001 Platform Timer Resolution:Outstanding Kernel Timer Request A kernel component or device driver has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Request Count 2 Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 10000 Requesting Process ID 8672 Requesting Process Path \Device\HarddiskVolume3\Program Files (x86)\Mozilla Firefox\firefox.exe Platform Timer Resolution:Outstanding Timer Request A program or service has requested a timer resolution smaller than the platform maximum timer resolution. Requested Period 100000 Requesting Process ID 1212 Requesting Process Path \Device\HarddiskVolume3\Windows\System32\svchost.exe Power Policy:802.11 Radio Power Policy is Maximum Performance (Plugged In) The current power policy for 802.11-compatible wireless network adapters is not configured to use low-power modes. CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name audiodg.exe PID 1304 Average Utilization (%) 4.73 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\msvcrt.dll 1.88 \Device\HarddiskVolume3\Windows\System32\MaxxAudioAPO5064.dll 1.77 \Device\HarddiskVolume3\Windows\System32\AudioEng.dll 0.80 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name thunderbird.exe PID 6036 Average Utilization (%) 0.35 Module Average Module Utilization (%) \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\xul.dll 0.16 \Device\HarddiskVolume3\Program Files (x86)\Mozilla Thunderbird\mozjs.dll 0.05 \SystemRoot\System32\win32k.sys 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace. Process Name dwm.exe PID 1340 Average Utilization (%) 0.25 Module Average Module Utilization (%) \Device\HarddiskVolume3\Windows\System32\dwmcore.dll 0.08 \Device\HarddiskVolume3\Windows\System32\nvwgf2umx.dll 0.05 \SystemRoot\system32\ntoskrnl.exe 0.03 CPU Utilization:Individual process with significant processor utilization. This process is responsible for a significant portion of the total processor utilization recorded during the trace.

  Read the article

• WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

  - by kobaltz

  Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

  Read the article

• Error when plugging iPod Touch into MacBook

  - by Mr. Man

  Whenever I plug my iPod Touch (2nd gen) into my MacBook running Ubuntu 10.10 I get the following error: DBus error org.freedesktop.DBus.Error.NoReply: Message did not receive a reply (timeout by message bus) It will show up in the file browser but whenever I try to mount it I get that error. EDIT: I thought that this might be because I had it plugged into a dock, but I tried plugging it in directly to the MacBook with the USB Cable and it still does not work, same error message.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >