Search Results

Search found 304 results on 13 pages for 'logitech'.

Page 9/13 | < Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >

• No sound (USB speakers) in Ubuntu 9.04 Jaunty Jackalope

  - by Mike

  I just installed Ubuntu 9.04 and have been unable to get sound functioning. I have a set of USB speakers (not USB powered with a stereo plug... they are totally USB). I've tried plugging them directly into the tower as well as into the USB port on my Dell 2405FPW monitor. Both USB ports are functioning correctly (I tested by sticking a flash drive in there - they both read it), and the speakers are functioning correctly in Windows. If it's relevant, I have an SB Audigy 2 sound card that came with the computer, but is not being used. Any ideas? Thanks! EDIT: These are the speakers - Logitech S-150 USB Speakers

  Read the article

• How to get better video quality in Lync?

  - by sinned

  I want to use a ConferenceCam from Logitech to stream talks live via Lync. When I view the RAW webcam image via VLC, the quality is very good (but the latency is high because of buffering). However, when I stream it using Lync, the video gets blurry. Is there a way to ensure QoS in Lync or otherwise improve the video quality to (near-)native? I would rather have some dropped frames than a lower resolution where I can't read the slides. In my setup, I use Lync with an Office365-E3 contract, so I have no Lync-Server in my network. I thought about replacing Lync completely with VLC, but I first want to try Lync because VLC will probably cause firewall issues. Also, I haven't looked up the VLC parameters for less buffering, faster encoding, a bit lower resolution (natively it's more than HD) and streaming.

  Read the article

• USB Keyboard not working under windows 7 x64?

  - by Comboo

  I have two usb keyboards, one no-name cheapo thing and an old logitech. When i plug them in to my computer they pop up in device manager as "Unknown device" respective "USB-receiver". Both of them fail to install any drivers, neighter automatically or through windows update. Both keyboards work perfectly on another computer i have with vista 32bit. Can this be one of those cases where a device does not work in 64bit version of windows? I doubt it though since I've never had that problem before with any device and i thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing usb-port etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over usb? There is nothing written on it.

  Read the article

• Use trackball to scroll, zoom, etc

  - by filledvoid

  I've got a Logitech Marble Trackball (which is great, btw). By setting one of the extra buttons as a "middle" mouse button, when I click it, many apps (like browsers) will start "scrolling mode" so that moving the trackball will scroll up and down. Most of the time, this is sufficient, but I figure it would be way cooler if I could have several "modes" to do different things like zooming, panning, rotating (particularly in GIMP). Then when I hold CTRL, CTRL+SHIFT, or some such, it would enter a new mode, and the trackball would behave differently. I found a couple questions similar to this that suggest using AutoHotKey, but I haven't found an example script to do this, nor can I find out to track mouse movements within AHK. Any pointers? hotkey for scrollwheel remedy for a no scroll wheel trackball? Thanks!

  Read the article

• Can't Type Tilde character in Mac OS X

  - by Brock Woolf

  Hi this is a new problem that I did not have a few weeks ago. I have a Logitech Illuminated Keyboard running on Mac OS X 10.6 (Snow Leopard). The problem is that I cannot type a tilde. Instead when I press the tilde I get this character: §§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§§ I cannot for the life of me figure this out, except that I vaguely remember I can asked to redetect the Mac keyboard layout for this keyboard and I think i chose the wrong one. Now I get this weird character when pressing tilde. How can I fix this? Or how can I redetect this keyboard layout? Thanks.

  Read the article

• ffmpeg open webcam using YUYV but i want MJPEG

  - by Pavel

  I need ffmpeg to open webcam (logitech c910) in MJPEG mode, because the webcam can give ~24 using MJPEG "protocol" and only ~10 fps using the YUYV. Can i choose between them using ffmpeg command line? xx@(none) ~ $ v4l2-ctl --list-formats ioctl: VIDIOC_ENUM_FMT Index : 0 Type : Video Capture Pixel Format: 'YUYV' Name : YUV 4:2:2 (YUYV) Index : 1 Type : Video Capture Pixel Format: 'MJPG' (compressed) Name : MJPEG My current command line: ffmpeg -y -f alsa -i hw:3,0 -f video4linux2 -r 20 -s 1280x720 -i /dev/video0 -acodec libfaac -ab 128k -vcodec libx264 /tmp/web.avi ffmpeg produces corrupted h264 stream when i record from webcam, but normal h264 strem when i record from x11grab. Another codecs (mjpeg, mpeg4) works well with webcam... But this is another story.

  Read the article

• USB microphone very quiet in Windows 7 64bit [migrated]

  - by Brian Harris

  My microphone input is very quiet. I record my voice and the recording comes out very faint. I can barely see the level indicator move when I'm 4 inches away, only when I'm 0.5 inches away does it pick up well enough. Motherboard: P8Z68-V Windows 7 64bit Mic: http://www.amazon.com/Logitech-Desktop-Microphone-Black-Silver/dp/B00009EHJV/ I've been searching the net and lots of people have this problem but I don't see any solutions that work. Maybe this isn't the best forum for a question like this, if not then let me know.

  Read the article

• Lock screen keeps making sound when screen is off

  - by row1

  I have my laptop (Asus UL20FT) on external power and hooked up to an external monitor. I keep the laptop lid closed and am using the 'second screen only' option. If you leave it on the lock screen for a short period of time the screen powers off. While the screen is off it keeps repeating a "duuuh duh duh" sound (sounds just like the device plugged in sound). The monitor is connected via HDMI and I have Microsoft and Logitech wireless USB dongles plugged in. How can I prevent this sound loop?

  Read the article

• Stop external USB keyboard repeating key presses on Vista.

  - by dommer

  We have an infuriating problem with a (Vista/Dell) laptop. When an external (Logitech) USB keyboard is attached to it, it regularly starts repeating key presses. When the user recently deleted an Outlook message, it deleted them all! When typing a message, suddenly it will start repeating the last keypress about 30 times (it varies). It's not a mechanical issue. We've switched the keyboard out four times. Even tried a brand new one one. Every time it's the same. Also, the keyboard works fine on other machines. The problem doesn't arise when the laptop's own keyboard is used - even if the external USB keyboard is still attached. I'm stumped? Any ideas. Not using an external keyboard isn't an option due to our health and safety policy (...don't ask...).

  Read the article

• Zoneminder camera permanently idle

  - by C. Ross

  I have an Ubuntu server with zoneminder installed. I only have one camera (cheap Logitech USB model) and it seems to be permanently idle. I'm also getting this error repeatedly in the logs 06/06/2010 08:26:56.563783 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:26:56.812964 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:26:56, pid = 29214] 06/06/2010 08:27:06.814486 zmwatch[28234].INF [Restarting capture daemon for main_room, shared memory not valid] 06/06/2010 08:27:07.054854 zmwatch[28234].INF ['zmc -d /dev/video0' starting at 10/06/06 08:27:07, pid = 29219] I've already tried following the instructions in the FAQ for increasing shared memory, but that doesn't seem to work. What do I need to do to get this working?

  Read the article

• Different keyboard layouts at same time for different devices

  - by Joao Carlos

  I have a MacBook Pro running Snow Leopard, and I am using it as a portable but also desktop computer. In order to acheive this, I bought a VGA adapter and I am using it with an external mouse, keyboard, and monitor. The problem is, the external keyboard layout is different from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave differently than they should. Question is, how can I set up different layouts at same time for different devices? I want US for external keyboard and PT for the default one.

  Read the article

• Diferent keyboard layouts at same time for diferent devices

  - by Joao Carlos

  Hello, I have a MacBook Pro running Snow Leopard, and I am using it was a portable but also desktop computer. In order to acheive this, i bought a VGA adapter and I am using it with an external mouse+keyboard+monitor. The problem is, the external keyboard layout is diferent from the one on the macbook. It is set to US qwerty (its a logitech G15), and because of that, most keys behave diferently from what they are supposed to. Question is, how can I set up diferent layouts at same time for diferent devices? I want US for external keyboard and PT for the default one.

  Read the article

• Why are my USB 2.0 devices hanging Windows XP?

  - by BenAlabaster

  Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

  Read the article

• Does anyone use the L-Track trackball?

  - by thethinman

  I've been using the Logitech Trackman Marble Mouse for years. Now I'm looking for a trackball with a scroll wheel, larger and heavier ball, and preferably rollers instead of pins. It must be finger (not thumb) operated. The Kensington Expert Mouse is close, but from what I've read the scroll wheel is poorly implemented. They also switched from rollers to pins. I bought a Kensington Orbit Trackball and it's not bad but the scroll wheel is rough and the ball is the same as the marble mouse. I'm still looking for something better. I found the L-Trac and it looks good but there's little info on the web. Has anyone used it and can provide their impressions? Or can you point out another option?

  Read the article

• WinXP keyboard input repeat rate problem

  - by Victor Sorokin

  I have problem similar to http://superuser.com/questions/33981/problems-with-kvm-switch-and-keyboard-repeat-rate-on-windows-xp: When I press and hold some key it's repeated random number of times, after that repeat stops and I need to release key and press it again to make repeat continue. If there's simultaneous sound playback and repeat is stopped, sound's stuck while I hold key with unpleasant drumming as if there's some audio problem. This issue is reproducible in WinXP Safe Mode. On the same config under Linux there's no issue. My config: List item PS/2 Logitech Keyboard USB Mouse MB M3A/H-HDMI WinXP Pro English SP2 with added Russian layout (WinXP loads via GRUB2) Realtek audio drivers for AC97 Thanks for your suggestions J

  Read the article

• Portable trackball mouse, any recommendations?

  - by joshcomley

  Hi, I know there are other "mouse recommendation" questions, but I'm after some specific advise: Are there any useful and portable trackball mice? I'm particularly interested to hear if the recommendation has been used by the recommender! I have some space for a mouse on my travels, which are mainly on a train. A trackball mouse is the only real viable option as I don't really have room to "move around" a lot. I'm aware of the Genius Traveller 350: And some more crazy inventions: Anybody actually used any of these? Or anyone know of anything a little better? I have the Logitech Trackman, but the receiver makes it wholly unportable (and it's quite big anyway): Any thoughts?

  Read the article

• Microsoft Wireless Mouse 5000 Scroll Not Working

  - by Nathan Totten

  I have a Microsoft Wireless Mouse 5000 with Intellipiont 7.1 installed on Windows 7 x64. The scroll has stopped working before, but a restart or two always seemed to resolve it. I tested the mouse on another computer and it worked. I also tested an Microsoft Arc mouse on this computer and the scroll worked. I have checked everything I could find on google and nothing helps. I have reinstalled intellipoint two times. Tried to change my mouse to another model in the intellipoint settings as suggested in many forums. Nothing. If anyone has any suggestions that would be great. Otherwise, I think my next step is to pitch this mouse and get a logitech at Best Buy tomorrow.

  Read the article

• Audigy 2 Coaxial to Coaxial/Optical connection possible?

  - by Chris

  Hello, The original question is deleted, and asked again below with accurate information. Edit: Excuse me for my ignorance, my friend has a Logitech Z-5500 set. I thought after comparing those systems on Google images that he had the Z-680, but he hasn't. This set has a single Digital coaxial for DVD or CD players or PC sound cards (requires coaxial cable, sold separately) cable. This single cable was connected to the orange tulip connector (SPDIF coaxial out) on the backside of his onboard HP Elite m9070, this connector is broken. How can I use the digital out with a single cable coaxial cable on the Audigy2 (see image below) (I have the following converters for my disposal, can I use one of these? 3.5 mm male - coax optical mini optical male - toslink optical female 2 x toslink optical female, toslink coupler, optical audio extension note: Is it possible to connect a toslink cable with an mini optical male - toslink converter on the digital out of the Audigy 2? (see image below)

  Read the article

• Computer not acknowledging sound card after move

  - by Angela

  We just got our computer back from having moved and when I tried to hook our speaker system, the computer keeps telling me that I don't have a sound system installed. It's a Dell computer with the original surround/subwoofer system that it came with and was working fine before the move. I tried buying a new speaker system (Logitech) to see if it would work, but still saying I have no audio device installed and it's not showing up in my device manager. I opened up the computer and unplugged the sound card, then plugged it back in, still nothing. I put the install disc from the sound card in the cd-rom, but it's saying that I have no sound device hardware in my system.

  Read the article

• upgrading my computer system for office use

  - by denise ellul

  Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

  Read the article

• Eliminating "phantom" or "ghost" clicks on my Mac Pro

  - by fbrereto

  Recently on my Mac Pro I have been experiencing phantom clicks and other strange behaviors. I have been rummaging through my system preferences to try and root out possible causes, and recently came across a strange finding in the Exposé panel (the keyboard modifiers are there from my taking the screenshot): I have had a Logitech 2-button mouse with a mouse wheel for years, and have never had a problem with it in the past. In addition I am running OS X 10.6.8 and have not had any issues like this up to this point. Is this a known issue? Is the extensive mouse listing a red herring? Are there any fixes for either issue?

  Read the article

• how can I discover what keys are being sent when I press a mouse button?

  - by jcollum

  I'd like to map my Logitech MX Revolution keys in Visual Studio. More importantly, I'd like to do it without installing any software. Is this possible? I specifically want to map the two side buttons to View.NavigateBackward and View.NavigateForward. But I'm not sure what those keys are mapped to right now. I thought they were mapped to Ctrl-Tab and Shift-Ctrl-Tab, since they seem to behave that way in Notepad++, but that isn't working in VS. I'm on the work computer, which means 2 problems: I'm in Windows XP and installing software is frowned upon/monitored.

  Read the article

• Bluetooth radio device is not available

  - by Mike

  I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

  Read the article

• Map mouse xbuttons to keypress?

  - by Will

  Hi, the utilities that come with my HP vector mouse are fairly basic. My old logitech G9, the best mouse ever made (except when it gets senile and starts having 'gaps') had a utility to map each of the buttons to a keypress, which I use in games, such as xbutton1 and 2 for run, etc. is there a utility, or a way, that I can map the 2 xbuttons on my new mouse so that they generate/simulate a keypress? I'm wondering if there are built in mappings in Windows that do this already, and its just a case of finding out what the keypresses are? thanks, Will

  Read the article

• Need Boxee/Vista remote control recommendations

  - by gurun8

  I have an Acer Aspire X1200 (specs link below) desktop computer that I've installed Boxee on and it works great. And it looks like it's going to be a perfect computer for a media player. It's small with lots of hard drive space and even has a HDMI output on it. http://support.acer.com/acerpanam/desktop/0000/Acer/AspireX1200/AspireX1200sp2.shtml I also have a Harmony® 880 Advanced Universal Remote (specs link below) that I'd like to use with the Acer computer. www.logitech.com/en-us/440/372 My thought is that I need to get a USB remote control adapter, right? So I did a quick Google search and found products from $5 to hundreds of $$$. Does anyone have recommendations? Things you like/dislike about certain remotes? This Acer is running Vista and has a AMD LIVE!: Athlon X2 dual-core processor. 64 bit some times makes it a little more difficult. Thanks for the help.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13  | Next Page >