Search Results

Search found 5859 results on 235 pages for 'driver'.

Page 91/235 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Remove NVIDIA Update and UpdatusUser

  - by Ove

  Does anyone know how to remove the UpdatusUser user created by installing the NVIDIA driver? Or better yet, how to install the drivers in such a way that UpdatusUser won't even be created? I have tried choosing custom installation and unchecking NVIDIA Update, but that does not work. Also, I have tried uninstalling NVIDIA update from Programs and features in Control Panel, but that won't remove the UpdatusUser account. I have also created a post in the NVIDIA forums that contains more images and details: here (please look at the screenshots there), but I didn't get a solution to my problem. I am using Windows 7 x64 and the latest NVIDIA 295.73 driver.

  Read the article

• Windows XP detecting printer as USB hub - how to start again without reinstalling XP?

  - by Umber Ferrule

  Fresh install of Windows XP SP3. No system restore. Didn't install USB printer drivers before connected it to PC. Mistakenly allowed XP to auto install some driver which turned out to be a USB hub(!). Now I can't get XP to see the printer as a printer. Have tried uninstalling the offending driver in Device Manager and rebooting but it keeps being detected as a USB hub. How do I revert XP back to a pristine, unsullied USB state so it doesn't know about the USB hub and will (hopefully) install the printer as a printer?

  Read the article

• How to discern video details from Linux Live CD

  - by Chris Lieb

  I was having trouble getting X.Org to work with the video card in a recently aquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?

  Read the article

• How to achieve reliable Gigabit Ethernet Link with my Acer Aspire Revo R3610?

  - by The Operator

  I want to stream HD movies over my wired Gigabit LAN from my PC to my Acer Aspire Revo R3610. It's connected with a 3ft Cat5e patch cable to my Netgear GS605v2 Switch. The PC acting as File Server is connected at 1Gbps to the Switch. Network driver options are set to defaults, including automatic speed/duplex negotiation on both machines. The Revo will not connect to my Network Switch at 1Gbps - the OS reports that it reverts to 100Mbps either shortly after connection or immediately upon connection. Through a process of elimination (trying different drivers, patch cables, ports on the switch, and other 1Gbps-capable devices connected to the Network switch which successfully achieve 1Gbps links and performance) I have drawn the conclusion there is either a Hardware or Software (Driver) issue with the Revo itself. I have performed tests using Windows 7 and Ubuntu 9.10. Can anyone offer insight on Gigabit Ethernet with the Revo?

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• Unable to connect to mysql through JDBC connector through Tomcat or externally

  - by Stefan Kendall

  I've installed a stock mysql 5.5 installation, and while I can connect to the mysql service via the mysql command, and the service seems to be running, I cannot connect to it through spring+tomcat or from an external jdbc connector. I'm using the following URL: jdbc:mysql://myserver.com:myport/mydb with proper username/password, but I receive the following message: server.com: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. the driver has not received any packets from the server. and tomcat throws: com.mysql.jdbc.exceptions.jdbc4.CommunicationsException: Communications link failure The last packet sent successfully to the server was 0 milliseconds ago. The driver has not received any packets from the server. sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:57) Which seems to be the same issue as if I try to connect externally.

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• Where can I get drivers for Windows 8

  - by Capt.Nemo

  I own a Dell Inspiron 1545, which came pre-installed with Vista. I upgraded to 7, and Dell made special windows 7 drivers available. I cannot seem to find any such special driver downloads for Windows 8. Is there any place I can check for driver updates, and be notified if and when they become available. The required drivers include: - Webcam - Alps Touchpad - Broadcom Wifi Of these, the webcam and wifi default windows drivers are working fine. However the touchpad configuration needs the official drivers.

  Read the article

• Thinkpad Bluetooth turns itself on upon restart/hibernate

  - by Traveling Tech Guy

  I have a T400 with Windows 7 64bit. About 3 weeks ago, the Lenovo update pushed a Bluetooth update that added a 2.1 driver and device experience. Since then, my bluetooth turns itself on whenever the OS comes up (full restarts as well as waking from hibernation). I can turn it of using the <Fn>+<F5> Radio menu, but it just turns itself on again the next time. If I forget to turn it off, it just eats my battery that much faster.I've been scouring the web and couldn't find similar occurrences. Is this a hardware issue, a BIOS issue (although no reference to BT in any of the BIOS menus), a driver issue or (shudder) a user issue? Thanks for your help.

  Read the article

• Logitech M185 Wirless Mouse issue

  - by Elliot Harrison

  An issue with a Logitech M185 mouse today. A user is unable to use the device. The device works perfectly fine on my PC (It appears as HID-compliant mouse), but not on her laptop. It does not appear in her device manager on the 'Mice and other pointing devices' section. I did notice an unknown device in the Universal Serial Bus Controllers section, but when I try to update the driver, it says it has the most up to date driver. We've tried plugging in the dongle in multiple USB slots but no luck. Any advice? It's a HP 620 Laptop on Windows 7. Thank you :)

  Read the article

• Why doesn't Ubuntu show my wireless device after updating the kernel?

  - by Jigar Shah

  After an kernel update Ubuntu doesn't show my wireless device. How can I fix this? I checked the syslogs and it says the following: 2010-02-16 19:25:39,913 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:25:39,940 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,066 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,086 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:25:46,162 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,451 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,480 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:05,506 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:12,496 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:19,870 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted 2010-02-16 19:35:23,398 WARNING: modinfo for module wl failed: ERROR: modinfo: could not find module wl 2010-02-16 19:35:23,399 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver 2010-02-16 19:35:23,432 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx: blacklisted, b43: blacklisted, b43legacy: blacklisted

  Read the article

• What is the lease irriating printer manufacturer?

  - by aireq

  Currently I have a Lexmark all in one printer/scanner which has some of the worse drivers I've seen for a printer. The installation takes forever. Then once it's installed the printer will only work if I keep the "Lexmark Productivity Studio" running in my system tray. Then later after I've scanned something 99% of the time the "Save to PDF" button doesn't do anything when I click it. It is also a wireless printer, but of course the only way to set any of the wireless settings is during the driver setup. So if my WEP key changes then I have to go off and reinstall the entire printer driver. Lately I tried refilling one of the ink cartridges with a key I bought off amazon, and now both the printer and the drivers keep complaining about being out of "Official Lexmark Ink" This comic from The Oatmeal pretty much sums up my feelings about consumer printers and their drivers. This question is, of course, pretty subjective but I'd like to know what (if any) consumer printer brands actual provide quality drivers and software with their printers.

  Read the article

• Install latest kernel to Ubuntu and have grub acknowledge the new installed kernel

  - by Phuong Nguyen

  I have an installed Ubuntu Distro (Karmic 9.10) already. However, due to some problems with xorg ati driver, I cannot standby my computer. Some guy have suggested me to try the latest version of xorg driver which in turn requires a newer version of Linux kernel than the newest release available from Ubuntu Central Repository (2.6.33). I have searched though several articles on how to install a custom Linux kernel. However, these articles are so 2004/2005 and they were talking about lilo (???). Since then, I'm afraid that I cannot make the Grub Boot recognize the new Linux kernel properly (I'm just a newbie to Linux). I would love to know how to install the kernel into Ubuntu and have grub acknowledge the new installed kernel.

  Read the article

• Printer Problems: Snow Leopard with Epson CX 4200 - worked and then didn't?

  - by user33521

  We got a new laptop in the office with Snow Leopard. We installed the new driver for the Epson CX 4200 printer we have and it seemed to be working okay. However, after an Apple update, the printer stopped working. A few days later we saw an update for the Epson driver and so we downloaded and installed that. However, the printer still isn't working. We plugged and unplugged the printer power cable and usb cable, and also tried replacing the ink (because the colour ink light was blinking)...however the printer still isn't working?

  Read the article

• Problem with USB drivers (Windows-XP)

  - by Carl

  I obtained the drivers from the manufacturer for my HT-Link NEC USB 2.0 2-port Cardbus card. When I plugged in the card before I got the drivers, 3 new entries showed up in the Device Manager - two "NEC PCI to USB Open Host Controller" and one "Standard Enhanced PCI to USB Host controller." With the card plugged in, I uninstalled those two drivers. I then removed the card. I copied the new drivers to c:\windows\system32\drivers and the .inf file to c:\windows\inf. I also copied the drivers & inf to a new directory called c:\windows\drivers\ousb2. I reinserted the card. Windows automatically installed the same drivers as before. I selected 'update driver' on the "NEC PCI to USB..." entry and didn't see any other options. I then selected 'have disk' and pointed to c:\windows\drivers\ousb2 and got a message "The specified location does not contain information about your hardware." I then selected 'update driver' on the "Standard Enhanced PCI to USB...," and manually selected "USB 2.0 Enhanced Host Controller" (OWC 4/15/2003 2.1.3.1). Windows then automatically found a USB root hub, and I manually selected "USB 2.0 Root Hub Device" (OWC 4/15/2003 2.1.3.1). Now there are two sections in the Device Manager titled "Universal Serial Bus controllers." I plugged in my external USB hard disk adapter, and "USB Mass Storage Device" was added to the first set. Here's how it looks (w/drivers from the properties): [Universal Serial Bus controllers] Intel(R) 82801DB/DBM USB 2.0 Enhanced Host Controller - 24CD (6/1/2002 5.1.2600.0) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C2 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C4 (7/1/2001 5.1.2600.5512) Intel(R) 82801DB/DBM USB Universal Host Controller - 24C7 (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) NEC PCI to USB Open Host Controller (7/1/2001 5.1.2600.5512) USB Mass Storage Device USB Root Hub (7/1/2001 5.1.2600.5512) (5 more USB Root Hubs - same driver) [Universal Serial Bus controllers] USB 2.0 Enhanced Host Controller (OWC 4/15/2003 2.1.3.1) USB 2.0 Root Hub Device (OWC 4/15/2003 2.1.3.1) When I unplug the card the two "NEC PCI to USB..." entries in the first set disappear, and the whole second set disappears. (I unplugged the hard disk adapter first...) The hard disk adapter still doesn't work in that Cardbus card with the new drivers. I don't think the above looks right - a second set of USB controllers listed in the Device Manager, and the NEC entries still in the first set, and the the USB mass storage device still in the first set. Any help appreciated. (Windows XP PRO SP3 w/all current updates.)

  Read the article

• No network adapter drivers after Windows re-install

  - by Arno

  This is a pretty basic question. I got a PC (Packard Bell Easynote TK11-BZ-010BE) that had linux on it, so I thought, just delete the partition and its alright. Well, it wasn't. I went into grub recovery and couldn't do anything, so I re-installed windows again. Now the problem is that everything works expect my network adapter. When I go to device manager, I get that there aren't any driver's for it installed. But without internet, I can't install the so called driver finders. How should I solve this?

  Read the article

• Deny users in a certain group access to dovecot

  - by celil

  I installed the dovecot-imapd package in Ubuntu, and my setup is as follows: $ sudo dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-27-generic-pae i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock auth default: passdb: driver: pam userdb: driver: passwd For security reasons I would like to deny all users that are in the admin group ability to do imap login via dovecot. This is done in order to prevent a brute force attacker from discovering the admin passwords, and obtaining administrator privileges on the system. How can this be achieved? Presumably, I will have to modify some settings in /etc/dovecot/dovecot.conf, but I am hesitant to change the default settings lest I create other security vulnerabilities.

  Read the article

• Why many applications close after opening a document or doing a specific actions?

  - by Mohsen Farjami

  I have some encrypted pdf files that have no problem and in my last windows, I could open them easily with Adobe Reader 9.2 and other pdf readers. But now, I can only open non-encrypted pdf files and one encrypted file with Adobe Reader. every time I open almost any encrypted pdf, it closes itself. Also, when I try to search a folder for a keyword with Foxit Reader, once it closed. This is not related to Adobe Reader, because I have the same problem with Word 2007. When I open a document, sometimes it closes instantly and sometimes it closes after a few seconds and sometimes it is stable. My windows is Fresh. I have installed it a few days ago. I have ESET Smart Security 5.2 and I have updated it today. OS: XP Pro SP3, RAM: 3 GB, CPU: 2 GHZ, HDD: 320 GB My installed applications: Adobe AIR Adobe Flash Player 11 ActiveX Adobe Flash Player 11 Plugin Adobe Photoshop CS4 Adobe Reader 9.2 Atheros Wireless LAN Client Adapter Babylon Bluetooth Stack for Windows by Toshiba CCleaner Conexant HD Audio Dell Touchpad ESET Smart Security Farsi (101) Custom Foxit Reader Framing Studio 3.27 Google Chrome Hard Disk Sentinel PRO HDAUDIO Soft Data Fax Modem with SmartCP Intel(R) Graphics Media Accelerator Driver IrfanView (remove only) Java(TM) 6 Update 18 K-Lite Mega Codec Pack 8.8.0 Microsoft .NET Framework 2.0 Service Pack 1 Microsoft .NET Framework 3.0 Service Pack 1 Microsoft .NET Framework 3.5 Microsoft Data Access Components KB870669 Microsoft Office 2007 Primary Interop Assemblies Microsoft Office Enterprise 2007 Microsoft User-Mode Driver Framework Feature Pack 1.0.0 (Pre-Release 5348) Mozilla Firefox 7.0.1 (x86 en-US) Notepad++ Office Tab FreeEdition 8.50 ParsQuran PerfectDisk 12 Professional Registry First Aid RICOH R5C83x/84x Flash Media Controller Driver Ver.3.54.06 Sahar Money Manager 2.5 Stickies 7.1d The KMPlayer (remove only) TurboLaunch 5.1.2 Unlocker 1.9.1 USB Safely Remove 4.2 Virastyar Visual Studio 2005 Tools for Office Second Edition Runtime Winamp Windows Internet Explorer 8 Windows Media Player 11.0.5358.4826 Windows XP Service Pack 3 WinRAR 4.11 (32-bit) WorkPause 1.2 Z Dictionary My startup applications: WorkPause USB Safely Remove TurboLaunch SunJavaUpdateSched Stickies rfagent Persistence ParsQuran Daily Verse ITSecMng IgfxTray HotKeysCmds Hard Disk Sentinel egui disable shift+delete CTFMON.EXE Bluetooth Manager Babylon Client Apoint AdobeCS4ServiceManager Adobe Reader Speed Launcher Adobe ARM What should I do to solve it? If you recommend installing Windows again, what guarantees that it won't happen again?

  Read the article

• Rotate monitor to portrait on Windows Server 2003 with ATI card

  - by user10179

  Does anyone know if it is possible to rotate a monitor from landscape to portrait mode on Windows Server 2003 32-bit with an ATI video card? According to Dell's site, I should be able to rotate my Dell P2310H monitor by installing drivers from their website, but they don't have drivers for Windows Server 2003. I let Windows Update search for the driver (with the driver CD that came with the monitor in my drive) and it did install drivers, but I still don't see any options for rotating. Some people say that the ATI Catalyst Control Center allows for monitor rotation, but I've never been able to run that software on Windows Server 2003. A google search reports that others have the same problem. Has anyone successfully figured out how to rotate a monitor on Windows Server 2003 with an ATI card?

  Read the article

• Laptop windows 7 power settings - screen display goes black after 1 minute

  - by Puneet Dudeja

  My laptop windows 7 power settings are not working since last week, i have tried using "Dim display after 5 hours" and "Dim Never" also, but my screen goes black after 1 minute. Any resolutions ? My laptop model is : Compaq Pressario CQ62 Graphics Card Information: Name Intel(R) HD Graphics PNP Device ID PCI\VEN_8086&DEV_0046&SUBSYS_1425103C&REV_02\3&11583659&0&10 Adapter Type Intel(R) HD Graphics (Core i3), Intel Corporation compatible Adapter Description Intel(R) HD Graphics Adapter RAM 1.21 GB (1,303,306,240 bytes) Installed Drivers igdumd64.dll,igd10umd64.dll,igdumdx32,igd10umd32 Driver Version 8.15.10.2119 INF File oem17.inf (iILKM0 section) Color Planes Not Available Color Table Entries 4294967296 Resolution 1366 x 768 x 59 hertz Bits/Pixel 32 Memory Address 0xD0000000-0xD03FFFFF Memory Address 0xC0000000-0xCFFFFFFF I/O Port 0x00004050-0x00004057 IRQ Channel IRQ 4294967294 I/O Port 0x000003B0-0x000003BB I/O Port 0x000003C0-0x000003DF Memory Address 0xA0000-0xBFFFF Driver c:\windows\system32\drivers\igdkmd64.sys (8.15.10.2119, 9.85 MB (10,326,784 bytes), 4/21/2010 6:18 PM) I am not able to solve my problem from any of the answers till now. The screen still goes dark and password screen appears after 1 minute of idle time.

  Read the article

• update ocz vertex le capacity via firmware update

  - by Ben Voigt

  I have an OCZ Vertex LE 100GB drive. It's actually 128GiB of NAND flash, with a whopping 28%+ reserved for write combining. Most 128GiB drives are actually ~ 115GB usable (and marketed as 120GB or 128GB). There were rumors that the reserved fraction could be decreased on OCZ 100GB drives. Can anyone provide a link to firmware that does that, or an official statement that no such firmware exists? (NB: I recently installed the 1.24 firmware from the OCZ site, it didn't affect the capacity. Possibly because the rumors say the capacity change is destructive to existing content.) Of possible interest: flashing firmware was more of a pain than it should have been -- the tool didn't detect the disk until I booted an older Windows install off a secondary hard disk, I suspect the Intel SATA driver is the issue and tool only works with the msachi.sys driver.

  Read the article

• How can I use 2 monitors plus laptop with my Dell e6420 w/ Nvidia nvs 4200m

  - by KallDrexx

  I have just hooked up a 2nd external monitor to my Dell e6420 laptop with a Nvidia NVS 4200m graphics card, running Windows 8 64 bit. However, the computer won't let me have both monitors and the laptop display active at the same time. I installed the latest Nvidia graphics drivers (310.70) but it claims that my GPU can only support up to 2 monitors. Nivdia's website implies differently (as does various other laptops around the office). The monitors are connected both via DVI to my dell docking station that has multiple DVI ports. Both monitors are working correctly, I just can't get all 3 working together. Attempting to download the driver from dell fails, as their driver installer is broken apparently Any ideas?

  Read the article

• Bypassing "Found New Hardware Wizard" / Setting Windows to Install Drivers Automatically

  - by Synetech inc.

  Hi, My motherboard finally died after the better part of a decade, so I bought a used system. I put my old hard-drive and sound-card in the new system, and connected my old keyboard and mouse (the rest of the components—CPU, RAM, mobo, video card—are from the new system). I knew beforehand that it would be a challenge to get Windows to boot and install drivers for the new hardware (particularly since the foundational components are new), but I am completely unable to even attempt to get through the work of installing drivers for things like the video card because the keyboard and mouse won't work (they do work, in the BIOS screen, in DOS mode, in Windows 7, in XP's boot menu, etc., just not in Windows XP itself). Whenever I try to boot XP (in normal or safe mode), I get a bunch of balloons popping up for all the new hardware detected, and a New Hardware Found Wizard for Processor (obviously it has to install drivers for the lowest-level components on up). Unfortunately I cannot click Next since the keyboard and mouse won't work yet because the motherboard drivers (for the PS/2 or USB ports) are not yet installed. I even tried a serial mouse, but to no avail—again, it does work in DOS, 7, etc., but not XP because it doesn't have the serial port driver installed. I tried mounting the SOFTWARE and SYSTEM hives under Windows 7 in order to manually set the "unsigned drivers warning" to ignore (using both of the driver-signing policy settings that I found references to). That didn't work; I still get the wizard. They are not even fancy, proprietary, third-party, or unsigned drivers. They are drivers that come with Windows—as the drivers for CPU, RAM, IDE controller, etc. tend to be. And the keyboard and mouse drivers are the generic ones at that (but like I said, those are irrelevant since the drivers for the ports that they are connected to are not yet installed). Obviously at some point in time over the past several years, a setting got changed to make Windows always prompt me when it detects new hardware. (It was also configured to show the Shutdown Event Tracker on abnormal shutdowns, so I had to turn that off so that I could even see the desktop.) Oh, and I tried deleting all of the PNF files so that they get regenerated, but that too did not help. Does anyone know how I can reset Windows to at least try to automatically install drivers for new hardware before prompting me if it fails? Conversely, does anyone know how exactly one turns off automatic driver installation (and prompt with the wizard)? Thanks a lot.

  Read the article

• Bluetooth radio device is not available

  - by Mike

  I reinstalled my Windows 7 operating system, and have since been unable to detect my Logitech m555b bluetooth mouse. Here is some info about my system: I have have a working connection with a bluetooth printer. I have a message in the "My Bluetooth" section of explorer stating "Bluetooth radio device is not available". The Device Manager indicates that the Generic Bluetooth radio is working correctly. The bluetooth "F12" switch is on. Mouse batteries are new and the right way around. I'm presuming that I need a bluetooth driver which is non generic. The computer is a Clevo P150HMx (the version with the GTX485 GPU) with the default WLAN / bluetooth combo card manufactured by Realtek (I think it's a Realtek RTL8188CE card). I think I have the drivers installed, but I still get the generic driver in the Device Manager. I'm confused. Please help, I'm going mad on the touchpad. (Thanks for the touchup wizlog)

  Read the article

• Linksys WiFi usb dongle and linux woes

  - by MrStatic

  I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great. tail of the system log Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink Jun 2 20:14:35 localhost kernel: usb 1-7: SerialNumber: 1.0 Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::radio Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::assoc Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::quality Jun 2 20:14:35 localhost NetworkManager[1367]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/ieee80211/phy3/rfkill3) (driver <unknown>) Jun 2 20:14:35 localhost kernel: rt2800usb 1-7:1.0: firmware: requesting rt2870.bin Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4 Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): now managed Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): bringing up device. Jun 2 20:14:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): preparing device. Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): deactivating device (reason: 2). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): supplicant interface state: starting -> ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 2 -> 3 (reason 42) [root@localhost log]# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated Tx-Power=8 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >