Search Results

Search found 19671 results on 787 pages for 'internet'.

Page 91/787 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • Cannot access certain URL on my wireless

    - by dehmann
    Problem: On my wireless network at home, there is one URL that I just cannot access with my browser: http://research.microsoft.com/ I have no problems with the Internet connection otherwise. But on that address I just get The connection was reset The connection to the server was reset while the page was loading. from Firefox. I am using a DSL modem (Westell) and Linksys wireless router (using DHCP). When I use my neighbor's wireless connection I can access the microsoft site without a problem. Additional technical details: But with my connection, here is what I get from nslookup. It is weird: It first cannot find the address, but after I look up another address it can find it: $ nslookup research.microsoft.com ;; connection timed out; no servers could be reached $ nslookup google.com Non-authoritative answer: Name: google.com Address: 72.14.204.104 Name: google.com Address: 72.14.204.147 Name: google.com Address: 72.14.204.99 Name: google.com Address: 72.14.204.103 $ nslookup research.microsoft.com Non-authoritative answer: Name: research.microsoft.com Address: 131.107.65.14 But even after nslookup finds it Firefox still cannot access it. Here is what traceroute says: $ traceroute http://research.microsoft.com/ traceroute: Warning: http://research.microsoft.com/ has multiple addresses; using 8.15.7.117 traceroute to http://research.microsoft.com/ (8.15.7.117), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 4.515 ms 2.760 ms 3.072 ms 2 * * * Traceroute just to the IP: $ traceroute 131.107.65.14 traceroute to 131.107.65.14 (131.107.65.14), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 11.912 ms 2.684 ms 2.808 ms 2 * * * Comparison: Traceroute to google.com IP: $ traceroute 72.14.204.99 traceroute to 72.14.204.99 (72.14.204.99), 64 hops max, 40 byte packets 1 dslrouter.westell.com (1XX.XXX.X.X) 6.428 ms 6.981 ms 117.099 ms 2 * * * Any comments / help?

    Read the article

  • I can't download or stream for more then 3 sec, and then the conection activity just dies

    - by JMHein
    Just got a new internet connection installed at my sisters place, but it randomly just stops working. At first it was only affecting flash videos. they would randomly just stop buffering. I did a lot of research on this and found that there can be many things that cause this exact trouble. I then tried IE and some flash would stream fine, but still random deaths. So I told my brother in law to reset the router and modem and that fixed the problem for them but not my laptop. I then started trying to fix the flash problem only to fined that downloads of any kind were affected. Now it is so bad that 50% of page loads will never finish because the connection drops to 0% usage with in a split sec. I can't get flash reinstalled because the installer is trying to download but the download dies at 8% I tried up loading a large file by FTP to a web server with no troubles. Yet any activity on my end that takes longer then about 1 sec to finish, just never finishes I can watch the network log in the taskmanager and it spikes for ruffly one sec then drops back to zero and when I go back to the web page it says it is still loading and no matter how long I let it sit it never does any thing more till I reload then it will again create a very short spike of activity on the connection and then drop to zero. Also if I start a download and it does drop off I can restart the download where it left off and get up to 100Kb/s for around the same one sec then it drops to around 14Kb/s then zero a sec latter... I am running Win 7 home prem x64 with FF11 and IE8 I have simply tried every thing I can short of calling up the ISP which very likely will get me no where fast. any advice on what step to take to figure this out would be nice. I am not even sure it is not just an ISP problem. (at least I should be able to get flash reinstalled once I get back home)

    Read the article

  • How to bridge multiple wireless access points (and internet entry points) into one network

    - by amccormack
    I have two DSL lines coming in to wireless access points and then running to a RV082 Gateway/Bridge. The gateway then runs to a switch, which runs to multiple PCs and a Printer (See picture below). Normally, I would set up the wireless access points behind the gateway, but they are also the modems for the dsl. I have found that I can not print to the network printer if I am connected to the wireless network, but only if I am connected to the wired network. How can I configure the Gateway and APs (Routers) so that the PCs and Printer are all on the same internal network? I have tried turning DHCP off or redirect on the APs and redirect them to the Gateway. However, neither of these worked. Furthermore, I tried pinging the Gateway from the AP but got no response.

    Read the article

  • I keep losing wireless connection

    - by posfan12
    I have a WRT54GL v1.1 wireless router and a WUSB54G v4 wireless adapter, both made by Linksys. The router is in the living room by the TV and the my computer is in the bedroom. My ISP is Brighthouse. Operating System Microsoft Windows 7 Home Premium 64-bit SP1 CPU Intel Core 2 Duo E6600 @ 2.40GHz 36 °C Conroe 65nm Technology RAM 3.00GB Single-Channel DDR2 @ 333MHz (5-4-4-14) Motherboard eMachines EMCP73VT-PM (CPU 1) 26 °C Graphics ASUS VS247 (1920x1080@60Hz) 767MB GeForce GTX 460 (nVidia) 43 °C Hard Drives 466GB Seagate ST350041 8AS SCSI Disk Device (SATA) 35 °C Optical Drives HL-DT-ST DVDRAM GH41N SCSI CdRom Device Audio High Definition Audio Device The problem is that my Internet connection will work fine for 15 minutes or so. Then the data will just stop flowing. Windows says I am still connected, and the systray icon still shows five bars. But Comodo Firewall will stop showing up and down traffic, and another of my systray applications complains about a lack of connection. What I usually do is either disconnect from the network manually, or unplug and re-plug the USB adapter. At which point the connection will work properly for another 15 minutes. I've tried unplugging my router for 30 seconds and letting it reboot. I've also tried looking for a newer driver for my adapter but I seem to have the latest version 3.1.3.0. This is a recent problem starting about a week ago. For the previous several months things were working just fine. I haven't made any changes to my system that I am aware of. The only thing I did was open my case to blow the dust out of it, then put everything back together. How do I fix this issue?

    Read the article

  • How much network latency is "typical" for east - west coast USA?

    - by Jeff Atwood
    At the moment we're trying to decide whether to move our datacenter from the west coast to the east coast. However, I am seeing some disturbing latency numbers from my west coast location to the east coast. Here's a sample result, retrieving a small .png logo file in Google Chrome and using the dev tools to see how long the request takes: West coast to east coast: 215 ms latency, 46 ms transfer time, 261 ms total West coast to west coast: 114 ms latency, 41 ms transfer time, 155 ms total It makes sense that Corvallis, OR is geographically closer to my location in Berkeley, CA so I expect the connection to be a bit faster.. but I'm seeing an increase in latency of +100ms when I perform the same test to the NYC server. That seems .. excessive to me. Particularly since the time spent transferring the actual data only increased 10%, yet the latency increased 100%! That feels... wrong... to me. I found a few links here that were helpful (through Google no less!) ... Does routing distance affect performance significantly? How does geography affect network latency? Latency in Internet connections from Europe to USA ... but nothing authoritative. So, is this normal? It doesn't feel normal. What is the "typical" latency I should expect when moving network packets from the east coast <--> west coast of the USA?

    Read the article

  • PORT FORWARDING TO PUT MY WEB SERVER ON THE INTERNET

    - by Chadworthington
    I went to http://canyouseeme.org/ to check to see what my external IP address. Regardless of what port I enter, it tells me that the port is blocked. I have a LinkSys router that basically has the default settings with the exception that I have WEP encrptin setup and I have forwarded a few ports, including 80 and 69. I forwarded them to the 192.x.x.103 IP address of the PC which is running IIS. That PC runs Symantec Endpoint Protection, which I right mouse clicked in the tray to Disable. These steps used to make my PC visible so I could host my own web site in IIS on port 80, or some other port, like 69. Yet, the Open Port tool cannot see my IP when it checks eiether port and when I navigate to http://my external ip/ I get "page cant be displayed" At first I was thinking that maybe Comcast is blocking port 80, but 69 doesnt work eiether. I do not see any other blockking set up in my router and, as I mentioned, I went with teh defaults except where discussed. This is a corporate PC and Symantec End Point Protecion is new to it (this previously worked on teh same PC with Symantec Protection Agent), but I thought that disabling Sym End Pt from the tray, that that would effectively neutralize it. I do not have the rights to kill the program itself. Any suggestions on what else to try to make my PC externally visible?

    Read the article

  • Authenticating AIX Users Against OID (Oracle Internet Directory)

    - by mwilkes
    We have a need to authenticate local users on an AIX server against OID using LDAP. We have a branch within OID where we've placed and synchronized Active Directory users. We've also configured external authentication on OID so that it verifies username/passwords against AD. Has anyone configured authentication for AIX in this type of environment? We believe we need to populate unix specific attributes on the user's directory entry in OID, but are unsure which attributes are needed. Additionally, we are looking to authenticate Oracle database users against OID but because of external authentication we are unable to populate the ORCLPASSWORD attribute on the user's directory entry on OID (which is the attribute Oracle is looking for password in). Help with either or both are welcome.

    Read the article

  • Easy solution to monitoring & blocking connections to non-malicious services, IP's, and tracking companies

    - by binarybunny
    Our family lives in the middle of nowhere, so the only high-speed internet available is Verizon's 3G mobile broadband. We have the highest package available, yet continually go over the 10GB limit and get charged $10 every 1GB we go over. We run a business from home, so stopping when we hit the limit is not an option. I've found the majority of connections are to Google, Microsoft, Akamai, Facebook, and other web service companies (mainly google). I know these are harmless connections, but when it costs money for them to monitor our web activity it becomes a serious problem. Here's some things I've done, but I'm sure there's something else that could help before blocking a huge set of IP ranges: stopped using windows (on my machine) use MVPS host file on all computers use firefox on all computers (with don't track me option) ad block plugin on all browsers blocking google updates blocking windows updates block images in browsers (when possible) use comodo (paranoia-level style of blocking..) virus-free computers with ESET NOD32 bought router and installed dd-wrt in attempt to block connections more diligently (and throttle bandwidth if it comes to that) Anything I'm missing? I know Google analytics is on almost all websites, as well as FB like buttons but I would like to be able to stop these connections without blocking use of google services like gmail, etc. Any ideas?

    Read the article

  • IE9 will not navigate to some websites but Google Chrome can

    - by Storchburp
    Was recommended by a friend to ask for help here. I am using Internet Explorer 9. As of two days ago I was suddenly unable to navigate to any part of the following websites: www.computerandvideogames.com www.deviantart.com www.cnet.com However I can still access all of them normally through Google Chrome. I am on a college network but these sites are also accessible through fixed terminals provided by the school and are definitely not blocked. I do not know of any other sites similarly affected. There is no popup, no error message, no diversion to a site telling me I can't access / am blocked etc. I can be on www.google.com and attempt to access these sites through the URL or google search, and my cursor will just show the little moving blue wheel next to the arrow for a couple of seconds, and the page displayed on my browser will not change; ie. not navigating at all. Running antivirus software, changing proxy settings in IE, clearing cookies, unplugging/plugging in computer, restarting PC etc have not changed the situation. Any assistance or advice would be greatly appreciated. Thanks in advance.

    Read the article

  • Connection Issue

    - by Karl Schneider
    Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

    Read the article

  • Setting up DNS server on VPS on the internet

    - by Nick Duffell
    I have followed multiple online tutorials on setting this up, it is BIND9 on a debian server. It is the only server I have, so it is acting as both ns1, ns1, and the server they domain name should point to itself. It all appears to be working and when I dig the domain name from the server itself I get (what seems to me) the correct output: ; << DiG 9.7.3 << theonetekkit.com.au ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: NOERROR, id: 18593 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;theonetekkit.com.au. IN A ;; ANSWER SECTION: theonetekkit.com.au. 3000 IN A 103.4.17.189 ;; AUTHORITY SECTION: theonetekkit.com.au. 3000 IN NS ns1.theonetekkit.com.au. theonetekkit.com.au. 3000 IN NS ns2.theonetekkit.com.au. ;; ADDITIONAL SECTION: ns1.theonetekkit.com.au. 3000 IN A 103.4.17.189 ns2.theonetekkit.com.au. 3000 IN A 103.4.17.189 ;; Query time: 15 msec ;; SERVER: 103.4.17.189#53(103.4.17.189) ;; WHEN: Wed Nov 7 02:12:58 2012 ;; MSG SIZE rcvd: 121 When I dig it from another server / computer, however, I am getting a problem: ; << DiG 9.7.3 << theonetekkit.com.au ;; global options: +cmd ;; Got answer: ;; -HEADER<<- opcode: QUERY, status: SERVFAIL, id: 56637 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;theonetekkit.com.au. IN A ;; Query time: 22 msec ;; SERVER: 103.4.16.166#53(103.4.16.166) ;; WHEN: Wed Nov 7 02:12:40 2012 ;; MSG SIZE rcvd: 37 I have given it more than enough time for the records to be refreshed since setting up the DNS server, so I don't know what would be causing this. Any ideas? Thanks

    Read the article

  • Why can`t we treat SSL Certs like Pgp keys instead of trusting CAs?

    - by yarun can
    I am dumb and stupid and I do not know all the technical aspects of SSL and server/client side implications and implementations. However I understand them good enough from user point of view to use SSL and encyrption daily. I was thinking that how silly it is to trust some unknown/known CAs when it comes to our our certificates for our servers. There had been many cases of misconduct, misuse, compromises and theft of certificates/ca keys from those places. On top of those known issues we also have to pay these guys regularly. I am wondering why can not we use/treat web server certificates like we use our pgp keys? So I sign a SSL certificate and send to a central server. And then each user accessing my site checks the validity and the keys from some central server (like pgp key servers). Is this a stupid idea? If so what could be a better idea than current system of issuing valid certificates. I am looking for a better than more secure idea. Naturally this is not a solution to an existing problem, rather it will be a hypothetical solution for some future implementation of a currently messed up web of trust on the internet due to recent news about NSA and their criminal buddies around the world. thanks

    Read the article

  • Vmware Player network adapters have no network or internet access in Windows 7 enterprise [closed]

    - by daffers
    As per the title. My VMWare player installation has setup the two network adaptor VMnet1 and VMnet8 and they are picked up as unidentified networks with no network access (i need this to activate my windows server installation on it). The option to change the network location is not available (this might be because of network policy on the domain despite having set this as configurable in the local security policy section). Is there anyway i can change how these networks are detected or alter the configuration of vmware to get around this?

    Read the article

  • Backtrack 4 internet problem/vmware tools

    - by Meiko
    Hi i recently installed "Backtrack 4" on my vmware workstation 6.5 and it wont install the vmware tools, and will neither let me drag and drop files into backtrack 4. My network connection says that dhcp is not enabled, but i went over to my reuter and checked and the dhcp was online (using Dir-300 from D-Link)

    Read the article

  • User Receiving Partial Downloads

    - by JGB146
    Some background: I run a subscription-based poker strategy video website. Our videos range in length from 30 mins up to 80 mins, and in size from 20MB up to 500MB. The site is on a shared server with hostmonster.com One of my users is having problems downloading some of the larger video file. He reports problems with anything over 100MB. Basically, he's only getting part of the file, which means that the video stops before the end. He has tried multiple computers from multiple locations. He reports that he is able to successfully download 500MB files from other sites. He is using Internet Explorer (version unknown) as his browser. I have suggested that he try Firefox or Chrome to see if their download managers work any better for him, but as of yet I have not heard anything back. He has also reported that his downloads do not report any filesize. I see the same thing (no file size reported), but I have not experienced any problems with the downloads themselves. We pass the downloads through a php script which verifies login information and records the download to our database before returning the file. I suspect this is why there is no filesize reported. What else should I ask the user? What other things could he or I try?

    Read the article

  • OpenVPN not sending traffic to internet?

    - by coleifer
    I've set up openvpn on my pi and am running into a small issue. I can connect to the VPN server and ping it just fine, and I can also connect to other machines on my local network. However I am unable, when connected to the VPN, to reach the outside world (either by name lookup or IP). here are the details: On the server the tun0 interface: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.1 netmask 255.255.255.255 destination 10.8.0.2 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 I can ping it just fine: # ping -c 3 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. 64 bytes from 10.8.0.1: icmp_seq=1 ttl=64 time=0.159 ms 64 bytes from 10.8.0.1: icmp_seq=2 ttl=64 time=0.155 ms 64 bytes from 10.8.0.1: icmp_seq=3 ttl=64 time=0.156 ms --- 10.8.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2002ms Routing table # ip route show default via 192.168.1.1 dev eth0 metric 204 10.8.0.0/24 via 10.8.0.2 dev tun0 10.8.0.2 dev tun0 proto kernel scope link src 10.8.0.1 192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.6 metric 204 I also have ip traffic forwarding: net.ipv4.ip_forward = 1 I do not have any custom iptables rules (that I'm aware of). On the client, I can connect to the VPN. Here is my tun0: tun0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1500 inet 10.8.0.6 netmask 255.255.255.255 destination 10.8.0.5 unspec 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 txqueuelen 100 (UNSPEC) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 21 bytes 1527 (1.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 And on the client I can ping it: sudo ping -c 3 10.8.0.6 PING 10.8.0.6 (10.8.0.6) 56(84) bytes of data. 64 bytes from 10.8.0.6: icmp_seq=1 ttl=64 time=0.035 ms 64 bytes from 10.8.0.6: icmp_seq=2 ttl=64 time=0.026 ms 64 bytes from 10.8.0.6: icmp_seq=3 ttl=64 time=0.032 ms --- 10.8.0.6 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.026/0.031/0.035/0.003 ms I can ssh from the client into another server on my LAN (192.168.1.x), however I cannot reach anything outside my LAN. Here's some of the server logs at the bottom of this gist: https://gist.github.com/coleifer/6ef95c3008f130249933/edit I am frankly out of ideas! I don't think it's my client because both my laptop and my phone (which has an openvpn client) exhibit the same behavior. I had OpenVPN installed on this pi before using debian and it worked, so I don't think it's my router but of course anything is possible.

    Read the article

  • Using Linode as a proxy server wrapped in DNS to bypass paid internet services

    - by snihalani
    I have a linode server that I use for development. I was thinking of using that as a proxy server. I have noticed that most paid connections allow DNS queries but don't allow http until I pay them. I verified this by flushing my dns cache and nslookup some random websites. How do I create a proxy server that allows me to may be wrap my packets from my computer in DNS packets, relay to my linode server with ssh key authentication and act as a broker? Thanks.

    Read the article

  • Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

    - by Jonah Goldstein
    I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

    Read the article

  • Internet Explorer 6 Encountered An Error ntl.dll Issue on XP and Win2000

    - by Gary B2312321321
    As we have some PC's still running Windows 2000 and this is beyond our control we use IE 6 so we can keep the IE platform standard. Recently on some XP and Win2000 PCs IE has been crashing with the Encountered a Problem and Needs to close do you want to send a message to Microsoft error when entering some sites. This happens even after a format reinstall with minimal software load (Office 2000, some avaya software, kaspersky, tapiex.dll). The module pointed to in the error report is ntl.dll. There are lots of reports over the net of the problem but has anyone resolved this issue? (Latest IE6 updates are installed). Also please note there were no 3rd party IE addons, spyware, viruses or adware Hope someone can help.

    Read the article

  • VMWare guest OS internet access issues

    - by Qua Phan
    My host is running Win 7 ultimate 64bit, ESET NOD32 AV 4.0 (64 bit). My guest OS is Windows XP Professional (Sp3) Using bridge mode, I can ping gateway just fine, even ping public dns server (8.8.8.8 or 208.67.222.222). But cannot resolve any dns request. I tried using nslookup with public dns, my gateway but no good. I can access my host share file normally thou. Any suggestions?

    Read the article

  • internet service providers

    - by gautam kumar
    I am unclear about the differences between international, national, regional and local ISPs. Please explain the differences and their importance, with examples. I am new to this site, so please forgive me if my question is not up to your expectations.

    Read the article

  • How does TTL affect my internet connection?

    - by Luiscencio
    Each day I run pings to test latencies, but TTL is different every day, sometimes higher, sometimes lower. How does this affect my connection? Reply from 209.131.36.159: bytes=32 time=106ms TTL=52 Reply from 209.131.36.159: bytes=32 time=93ms TTL=52 Reply from 209.131.36.159: bytes=32 time=63ms TTL=52 Reply from 209.131.36.159: bytes=32 time=73ms TTL=52

    Read the article

  • How to access website on localhost from internet?

    - by Nitesh Panchal
    Hello, I turned my pc into router by allowing port forwarding on port 80 and got my hostname(xyz.donexist.org) registered through dyndns.com. Now i when i type my public ip address in browser i get redirected to my browser. I have installed glassfish and have my website deployed in glassfish. I want that when i type xyz.donexist.org my website should be opened. What all steps more i need to take? I have made a entry in etc/hosts file as :- 127.0.0.1 xyz.donexist.org Please guide me. I am and beginner. Thanks in advance :)

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >