Search Results

Search found 22914 results on 917 pages for 'solid state drive'.

Page 92/917 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Slow speeds on Samsung SSD PM800 256gb on a Lenovo W500

  - by cc0

  I recently bought a W500 with a 256gb samsung ssd drive. Now it seems ridiculously slow at writing. I am copying files at about 30mb/s, but I can read them at about 200mb/s. I tested it with the AS SSD Benchmark v1.4, and got a sequential writing speed of 34.64mb/s and reading speed of 196.95mb/s When I bought it the drive had only been in use for about 240 hours, and according to the CrystalDiskInfo app it had 98% health. Is there a bottleneck here somewhere? Or is the drive just plain bad. I'd really love it if someone could help me find some answers. The main relevant (I hope) w500 specs for this machine are; T9600 @ 2.8ghz 4gb ddr3

  Read the article

• Windows 7 - swap file on a USB disk? [closed]

  - by Sara Cohen

  Possible Duplicate: How to move the page file to another physical disk location Windows 7 I was given temporarily a PC, running Windows 7 Ultimate. The problem is it's hard drive is full, there are like 250 MB free. The swap file is set to none. It has 4 GB RAM. When I load a few tabs in Chrome or IE and start a game it runs out of memory. I already emptied Recycle Bin, %temp%, etc. Deleting/moving user files or adding RAM is not an option. Now I have a USB 3 7200 RPM drive, it's connected to a USB 3 port and is really fast. Is there a way to create a swap file on that drive?

  Read the article

• Western Digital My Book World drops off network

  - by Macha

  Most of my storage in my house relies on a WD My Book World Edition 500GB network drive. I threw out the vendor crapware they give you to access it (a trial version of Mionet) after it starting nagging me to upgrade, and set it up as a standard network drive using Window's Map Network Drive. However, since then, it has been dropping off the network after 30 minutes of non-usage. The only way to get it back on is to switch it off and on again at the plug socket. Does anyone know what is causing this, and hopefully how to fix it? EDIT: it's the original "blue rings" version with the latest firmware.

  Read the article

• Is there an easy way to convert a SolidWorks drawing to an 3d flash file?

  - by Max Schmeling

  My dad does a lot of designing in SolidWorks for his business, and I would like to take one of his 3D drawings and put it on the web on a product page. Is there any way to easily convert that to flash? Thoughts? Recommendations?

  Read the article

• Can my PowerMac G3 B&W really take a harddrive larger than 128GB?

  - by Josh Calvetti

  So it's a well known fact that the PowerMacs manufactured before 2002 cannot take a harddrive larger than 128GB. I have an old B&W that was running 10.4, and upon putting a 250GB drive inside, it told me that I had inserted a 128GB. That was expected. However, I recently decided to turn that machine into a Debian home file server. I shoved the 250GB drive inside, did some formatting, and now it tells me that it is a 250GB drive. Is this safe to use? Will all my data go corrupt after I've added more than 128GB of stuff? In case the specs are helpful to have, it's a 400MHz B&W, 1GB RAM, Rev. B.

  Read the article

• Partition External Harddrive already using Time Machine?

  - by Wex

  I have a 1TB external that I've used to backup my Mac for the past year using Time Machine. Unfortunately, my hard drive is getting close to full, and I'd like to move some of the stuff off of my Mac onto the same external drive. The problem is that the external drive is already full with my Time Machine Backups. I'd like to partition 750GB to the Time Machine Backups, and save the other 250GB for personal use. Is there any way I can go about this without corrupting my current backups? I'm willing to delete some of the older backups if necessary; again I'm just worried about corrupting the data.

  Read the article

• Replacing notebook SATA hard disk with SSD without reinstalling

  - by Graeme Donaldson

  So there's a notebook (Lenovo Thinkpad Z61m) with a SATA hard disk, the SATA controller is configured for native AHCI operation & the OS is Windows XP. The hard disk is going to be replaced with an SSD which is larger. I have an idea of how I'm going to do this, but I want to be sure there isn't something obvious I'm missing. Connect external USB drive Boot some flavour of Linux live CD Use dd to clone the SATA disk to the external drive Power off and replace the SATA disk with the SSD Boot the live CD Use dd to clone back from the external drive to the SSD Does anyone have anything to add?

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• MacBook Pro - 72k vs 54k rpm drives - Heat and Noise

  - by webworm

  I am looking at a new 15" MacBook Pro for development purposes. I am planning to run a Virtual Machine for about 50% of my work (Windows 7 x64, IIS, SQL Server, and VS 2010). The upgrade from a 54000 rpm drive to a 72000 rpm is only $45. From what I understand the faster rotational speed of the 72000 rpm drive will help virtual machine performance. However, I am concerned that additional heat and fan noise might be an issue. I will be running mostly on A/C power so decreased battery life is not a major concern for me. Since I would be running with a Core i7 processor which gives off a fair amount of heat already I was wondering if it might be best to stay at 54000 rpm for the hard drive. What do you all think? Thanks!

  Read the article

• Set default expand/colapse state on pivot tables

  - by CLockeWork

  The Setup I have a pivot table in tabular form pulling data from an Analysis Services Cube. I want to calculate the number of days between two dates, but the setup will only allow me to pull in all date elements, not just the date. I’ve been able to deal with this easily enough by just grouping all the columns: The Problem The default state for the expand/collapse buttons in the image above is often collapsed, but that means the dates I need aren’t there and you have to open the group and manually expand them. This also happens in some random ways (as shown in the image) where only some rows expand. The Question I need a way to set these sections to always be expanded, so that the user never has to open the group to expand the rows. Ideally I’d like to avoid VBA because our end users often block it, but if that’s what’s needed then so be it. Is there a way to set my pivot table to never collapse it’s predefined groups? Note the end user is using Excel 2010

  Read the article

• SD card mounted as bootable image instead of FAT 32

  - by Benny Wong

  I have an SD card that I recently used to take photos on vacation. It have taken a lot of photos using it and worked fine on the camera. However, I had forgotten that a few months before this trip, I tried to make the SD card a bootable Xubuntu USB drive. So when I plugged my SD card in to copy the photos, the card mounts as the Xubuntu image, rather than mounting as the FAT32 drive with the images on it. The files must still be on the drive. Any ideas on how to fix this? (I'm using Mac OS X) Thanks!

  Read the article

• Do SSD hybrid drives perform better than HDD + ReadyBoost flash?

  - by Chris W. Rea

  Seagate has released a product called the Momentus XT Solid State Hybrid Drive. This looks exactly like what Windows ReadyBoost attempts to do with software at the OS level: Pairing the benefits of a large hard drive together with the performance of solid-state flash memory. Does the Momentus XT out-perform a similar ad-hoc pairing of a decent hard drive with similar flash memory storage under Windows ReadyBoost? Other than the obvious "a hardware implementation ought to be faster than a software implementation", why would ReadyBoost not be able to perform as well as such a hybrid device?

  Read the article

• Using a non-validated SED on a Dell R720

  - by a coder

  We were given a Dell R720 a couple years ago, and the machine currently has standard 300GB 3.5" SAS 15k drives. Our RAID controller is a Perc H710. We need to update our disks to FIPS 140-2 certified SED. According to Dell, they have only one tested/validated FIPS SED for this machine/controller, but it is a 7200rpm 3.5" unit. I'm showing that Dell offers a 600GB 15k FIPS SED in 3.5" configuration (Dell part number 342-0605), but they say they haven't validated or tested to know if it works. They informed us that we would not void our warranty in using this non-validated drive. How likely is it that our R720 with H710 controller will work with the non-validated drive? Are there significant differences in how drive manufacturers build SED that would prevent them from working consistently across different controllers?

  Read the article

• Does the advanced format tool bundled by manufacturers actually do anything which mkntfs doesn't?

  - by neurolysis

  I recently bought a new drive (specifically, a 2TB Samsung Spinpoint) that says on the label that it supports advanced format, and that I should download the tool from their site. Unless I'm missing something, mkntfs has always had its maximum sector size at 4096b: -s, --sector-size BYTES Specify the size of sectors in bytes. Valid sector size values are 256, 512, 1024, 2048 and 4096 bytes per sector. If omitted, mkntfs attempts to determine the sector-size automatically and if that fails a default of 512 bytes per sector is used. Will this tool on Samsung's site do anything other than format the drive in the same way doing mkntfs -s 4K /dev/sdb1 would do? To be specific, I'm intending to use this drive on a machine that will primarily run Windows XP, but I'd rather boot into Linux/BSD and format the disk manually than have bloated software. I do want to have the new AF style sectors though -- that's essential. So if I did the command above, would it have exactly the same effect as using the advanced format tool?

  Read the article

• S.M.A.R.T - Predictive Failure Count

  - by Bastien974

  I'm monitoring my IBM ServeRAID M5015 controller for RAID status with MegaCLI, I have this on one of the disk : Enclosure Device ID: 252 Slot Number: 6 Enclosure position: 0 Device Id: 14 Sequence Number: 2 Media Error Count: 32 Other Error Count: 0 Predictive Failure Count: 18 Last Predictive Failure Event Seq Number: 8119 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.464 GB [0x22cee000 Sectors] Firmware state: Online, Spun Up SAS Address(0): 0x5000c50042c319c9 SAS Address(1): 0x0 Connected Port Number: 5(path0) Inquiry Data: IBM-ESXSST9300653SS B6336XN04HC10525B633 IBM FRU/CRU: 81Y9671 FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive: Not Certified Drive Temperature :33 Celsius What does this mean exactly ? I can't find an exact description, is there a way to have more details ? The RAID array has the Optimal state. Media Error Count: 32 Predictive Failure Count: 18 Is there a way through the CLI to power-on the front LED so I physically know which disk I need to replace ?

  Read the article

• Harddrive in the freezer ever work for you?

  - by Stefan Thyberg

  Once upon a time, my little 10 GB drive in my webserver failed and of course I had no backup, teaching me to immediately set up an automatic backup job afterwards. Anyhow, this drive refused to start and as a last-ditch effort I put it in a plastic bag and put it in the freezer overnight, since I had heard somewhere that it might work and I really didn't have any other options. The next day I take it out, immediately plug it in outside the case and lo and behold, the drive works long enough for me to copy my data off it. Have you ever had a similar experience with this method?

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• Looking for a free or open-source burner emulator [closed]

  - by Jared Harley

  Possible Duplicate: Virtual CDR driver I am looking for a free or open-source virtual CD/DVD emulator to run in a Windows environment. What I want is similar to what SlySoft's Virtual Clone Drive or Daemon Tools provides, but the emulated drive needs to be a burner of some type. The burner should be able to save disc images (.iso, .ccd, etc) to my harddrive - basically, the same as if I burned the files to a CD-R, and then ripped them back to a disc image. I have already looked around some and come across 2 - DVD neXt COPY iTurns and NoteBurner M4P. Both of these programs create a virtual CD-RW drive, but they are integrated into their product (for burning from iTunes to create mp3 files) and cannot create disc images. I am currently writing a piece of software that will have the capability to burn disc images onto CDs/DVDs, and I don't want to end up with a 100 coasters while I'm testing my software. Anyone have any ideas? Related ServerFault queston: Create netbook recovery image without DVD burner (virtual burner?)

  Read the article

• Colored blocks on boot

  - by stackzerad

  When my laptop tries to boot right after POST I see colored blocks with flashing symbols in them. I am able to boot from windows PE cd. Tried fixboot and fixmbr with no success. I have also tried replacing boot files (ntldr, io.sys etc..) and removing video card drivers from windows\system32\drivers. The drive is seagate 2.5 ATA 160GB and has one NTFS partition on it. I have already fixed this issue by reformating the drive and reinstalling everything but after couple of weeks I get the same issue again. The diagnostics software shows no bad sectors on it and virus scan didn't find anything. Does anybody have an idea what this might be? UPDATE: tried defragmenting the hard drive just in case, but still no luck

  Read the article

• ubuntu12.04 hangs at checking battery state

  - by crystalbass17

  My 12.04 system hangs at "Checking battery state". At this stage, no commands work eg: ctrl+alt+f1, alt+f5. I ran recovery mode, I ran the command sudo mount -o remount, rw sudo dpkg-reconfigure gdm and gdm was the only one installed so I didn't get a GUI screen. I have an integrated graphics card "Intel Corporation Mobile 4 chipset Integrated Graphics Controller (rev 07)". So I cannot install nvidia drivers as everyone else suggests. I have gone through several similar questions but everyone suggests reconfiguring gdm or reinstalling graphic drivers. I did sudo add-apt-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get upgrade to get the latest x-swat drivers. The system still hung at the same line. The other option is to reinstall ubuntu, which is out of the question, since we have a very specific install for our project where the settings are very hard to duplicate. Suggestions/Comments welcome.

  Read the article

• Delete the pendrive contents and also trash in Mac OS X?

  - by Warrior

  I am using a MacBook Pro. I copied some data from my pen drive to my Mac and deleted the content by moving it to trash. After that when I see the info of pen drive it give more value than the original value. If I cleaned the content of the trash only I am able to see the correct value of pen drive and able to copy data. Has Mac been designed like that or is there some other way to delete other than using the "move to trash" option? Thanks.

  Read the article

• Why are my flash drives getting formatted?

  - by user13743

  I've had two cheapie flash drive from Microcenter, and they booth out-of-the-blue became unformatted. When you insert then in the USB drive, windows says "The drive is not formatted. Do you want to format it now?" And then it can't actually format it. Nothing happened to them physically. For one, it 'died' during a reset, and the other, it was normal and then it was dead once when I inserted it, IIRC. What's the deal? Are these just cheap, crappy drives, or what?

  Read the article

• Recommendations for stable, reliable flash drives

  - by Josh Kelley

  We're looking to purchase some flash drives for use in some embedded devices. Most of our requirements aren't too different the generic "good, fast" flash drive: reliability is very important, speed is good, and so that the drive will fit, the case shouldn't be too large (so no OCZ Throttles). Consistency is also a major priority; we'd like to be able to buy more or less the same product a year or two from now without having to worry about the manufacturer swapping drive components with less reliable or slower parts. (We've been burned already by our previous manufacturer doing this.) Any recommendations, especially regarding consistency? I can read Ars Technica to get an overview of current models, but what are consistently good models?

  Read the article

• TCP connection stuck in SYN_RECV state despite ACK received, Linux 2.6.18, embedded, ARM

  - by waynix

  My client cannot connect to my protocol port (TCP) after some network glitches, even though all other protocols (telnet/HTTP/FTP) work fine. netstat shows that my server is listening and tcpdump on the server shows all 3 packets are exchanged: 18:29:16.578964 IP 10.9.59.10.3355 10.9.43.131.5084: S 2602965897:2602965897(0) win 65535 <mss 1460,nop,nop,sackOK> 18:29:16.579107 IP 10.9.43.131.5084 10.9.59.10.3355: S 3464857909:3464857909(0) ack 2602965898 win 5840 <mss 1460,nop,nop,sackOK> 18:29:16.579284 IP 10.9.59.10.3355 10.9.43.131.5084: . ack 1 win 65535 But somehow netstat -t shows the connection still in SYN_RECV, as if the ack is not seen by the TCP state machine. I have to restart my server to get it to work. syncookie is not enabled, and I know from client code behavior and tcpdump that there is no SYN flooding. Help much appreciated.

  Read the article

• How to determine the best byte size for the dd command

  - by James

  I know that doing a dd if=/dev/hda of=/dev/hdb does a deep hard drive copy. I've heard that people have been able to speed up the process by increasing the number of bytes that are read and written at a time (512) with the "bs" option. People have suggested that the optimal byte size is due to sector size. I personally think it would have something to do with the amount of cache that the hard drive has. My question is: What determines the ideal byte size for copying from a hard drive? and Why does that determine the ideal byte size?

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >