Search Results

Search found 9156 results on 367 pages for 'cloud storage'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 94/367 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • Is it common to have portable hard drive not recognize?

    - by lamwaiman1988
    I have a bad hard drive which could not be recognized by windows. If windows can recognize it, it could just be pure luck. There are better chance of it being recognize by plugging it at the usb back of the machine, rather than the front one. More interestingly, I have a usb cable which fork itself at one side ( i.e it has 2 heads at one side ). I can plug both heads to the machine and connect the portable hard drive on the other end of the usb cable? Can I get more voltage by doing this? I am guessing the front usb port doesn't have enough power. I am wondering if I buy a new portable usb hard drive, would it have easy read by plugging at the front usb port? I am not sure if I screw up the jumper connecting the front usb ports, but it is okay for other device such as usb stick and mouse.

    Read the article

  • Can I use plain RAID on a Drobo?

    - by cringe
    I'm thinking about a RAID device and the Drobo is on top of my list (followed by the WD ShareSpace). But I don't want to be in another walled garden with Drobos BeyondRAID technology. Can I use the Drobo with a plain RAID setup? So I can take my HDDs and connect it to another RAID controller and go on?

    Read the article

  • Sharing information between nodes in Beowulf Cluster

    - by Alejandro Sazo
    I am setting up a beowulf cluster and I've been reading that it might be necessary to make the home directory of the cluster users shared between them (assuming this users are local to each machine). The other case is leave each user with its own home and the communication is up to the master node. Another idea that came up was to use an LDAP unique user logged on each machine in the cluster, that keeps the idea of the shared home between nodes (but is only one home of one user). Which approach is better for this kind of cluster? Edit: The cluster is running openmpi and it will support cuda and opencl

    Read the article

  • Does a 3ware "ECC-ERROR" matter on a JBOD when I have ZFS?

    - by Stefan Lasiewski
    I have a FreeBSD 8.x machine running ZFS and with a 3ware 9690SA controller. The 3ware controller shows an ECC-ERROR with one of the disks: //host> /c0 show VPort Status Unit Size Type Phy Encl-Slot Model ------------------------------------------------------------------------------ p0 OK u0 279.39 GB SAS 0 - SEAGATE ST3300657SS p1 OK u0 279.39 GB SAS 1 - SEAGATE ST3300657SS p2 OK u1 931.51 GB SAS 2 - SEAGATE ST31000640SS p3 ECC-ERROR u2 931.51 GB SAS 3 - SEAGATE ST31000640SS p4 OK u3 931.51 GB SAS 4 - SEAGATE ST31000640SS /c0 show events shows no ECC errors in it's recent history. ZFS does not currently detect any errors. zpool status says No known data errors My question: Is this ECC-ERROR something that I need to be concerned about? According to the 3ware CLI 9.5.2 Manual, an ECC-ERROR means that the 3ware controller caught a read-error for one or more sectors on this drive. This sometimes occurs when a RAID array is recovering from a failed disk. I believe that ECC-ERRORS can also be detected when the 3ware Controller verifies each disk. None of the drives have failed and thus there was no drive rebuild, so I assume that 3ware discovered a bad sector when it ran it's weekly auto-verify scan of the disks. Is this a safe assumption? According to our logs, ZFS has not detected any bad sectors on this drive. ZFS can work around read errors -- if ZFS detects a bad sector on the drive, it will simply mark that sector as bad and never use it again. From the ZFS perspective one bad sector isn't a big deal, although it might indicate that the drive is starting to go bad.

    Read the article

  • How to upload stuff to Amazon EC2 Windows instance?

    - by JohnIdol
    I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works, in terms of transferring data to my ec2 instances. So the question is how can I upload stuff to my instance? Any help appreciated!

    Read the article

  • How do projects manage chef cookbooks when multiple teams manage multiple sets of cookbooks?

    - by strife25
    I am wondering how projects that have multiple component teams manage their sets of cookbooks? We are trying to figure out how we can have an ops team provide a set of "common component" cookbooks that can be re-used by other teams that will also write their own cookbooks. For example, the ops team should own the Java cookbook, while a component manages their cookbooks written for their component or build engines. From my little experience with chef server, this kind of workflow seems to not be well supported since the server stores and manages all cookbooks - so there is a potential to overwrite a cookbook written by another team. How do other projects deal with this type of problem?

    Read the article

  • Disabling RAID feature on HP Smart Array P400

    - by Arie K
    I'm planning to use ZFS on my system (HP ML370 G5, Smart Array P400, 8 SAS disk). I want ZFS to manage all disks individually, so it can utilize better scheduling (i.e. I want to use software RAID feature in ZFS). The problem is, I can't find a way to disable RAID feature on the RAID controller. Right now, the controller aggregates all of the disks into one big RAID-5 volume. So ZFS can't see individual disk. Is there any way to acomplish this setup?

    Read the article

  • IOmeter Hanging

    - by Xiuhtecuhtli
    am attempting to setup a test bed with 2 server using IOmeter.exe I have IoMeter & Dynamo running on My Manger server @ 10.0.0.3 i have another machine running only Dynamo @ 10.0.0.4 so. on 10.0.0.4 i run "Dyanmo.exe /i 10.0.0.4 /m 10.0.0.3" at this point the Iometer.exe on 10.0.0.3 Hangs and stops responding. Any Thoughts?

    Read the article

  • MediaShield RAID 5 is showing up as 760GB when the actual size is 2.7TB

    - by Ilya Volodin
    I just finished setting up Windows 2003 Server on my new server. And I started setting up a RAID 5 for it. I have 4x1TB Hard Drives. From MediaSheild RAID Utility (at boot time) the RAID size is displayed as 2.7TB. Linux also shows it as 2.7TB. However, in Windows, everything (including Windows Disk Management as well as Windows based MediaShield utility) is reporting only 760Gb. I already tried converting partitioning table to GUID from MBR, because I read somewhere that Windows can only handle up to 2TB MBR tables, that didn't help much. Tried searching for partitioning utilities that I could use, but couldn't find anything free. Formatted the disk as NTFS partition from within Linux, it stop showing in Windows all together, even MediaShield windows utility isn't showing at anymore. Windows is installed on a separate 500Gb hard drive, that's setup not to support RAID. Any ideas?

    Read the article

  • Is RAID 5 or SnapRAID the better alternative for a media server raid system?

    - by rubo77
    I am using a raid 5 system for my ubuntu 12.04 xmbc media server with 5 disks. Since the data isn't changing a lot and a total loss wouldn't be so bad, cause I have another backup anyway I am thinking about using SnapRAID It sais: SnapRAID is mainly targeted for a home media center, where you have a lot of big files that rarely change The main advantage for me would be power-saving, cause not all disks have to run all the time. Would you recomment using this? (with a regular resync script once a day)

    Read the article

  • Database Performance Across 3 NetApp FAS2050

    - by bjd145
    I recently inherited a SQL Server 2005 box that has LUNs mounted on it from three different NetApp FAS2050 filers. The reason there are three is because the first two filers are out of space and our databases continually need more of it. What kind of performance impact (if any) does this setup have? Is it better to move the LUNs from the two other older filers to the newer one so that we have only one filer/controller for caching, etc ? This is in general. I apologize for not having more specifics.

    Read the article

  • Failures when copying between two external drives on the same controller

    - by Krzysztof Kosinski
    I'm encountering a weird problem which is present both on Ubuntu 9.10 and 10.04, on two different machines. When trying to copy between two external drives connected to the same USB controller, the transfer will randomly hang at some random time (after copying 300MB, 1GB, 10GB - it doesn't appear to depend on the dataset being copied). The hang appears to happen faster in 10.04. It appears to happen slower if both drives are connected to a hub. If the drives are connected to 2 distinct physical ports on the machine, the hang will be very fast. Hangs cannot be reproduced if: Data is copied from the first external drive to an internal drive, then to the second external drive Drives are connected to different USB controllers, for example the first one is connected to the built-in controller and the second one via an external PCMCIA controller. lspci says the first machine has an Intel ICH9 USB controller, the second an Intel ICH4. Is this a hardware problem, a kernel problem or a software issue? I used Nautilus when copying the files.

    Read the article

  • How can I repair my USB drive?

    - by yurko
    USB drive is in read only state and I can't repair it. First of all I tried erase it using dd: root@yurko-laptop:/home/yurko-laptop# ls -l /dev/disk/by-id | grep usb lrwxrwxrwx 1 root root 9 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0 -> ../../sdb lrwxrwxrwx 1 root root 10 ??? 18 23:45 usb-Generic_Flash_Disk_C173828A-0:0-part1 -> ../../sdb1 root@yurko-laptop:/home/yurko-laptop# dd if=/dev/zero of=/dev/sdb dd: ?????? ? «/dev/sdb»: ?? ?????????? ????????? ????? 8257537+0 ??????? ??????? 8257536+0 ??????? ???????? ??????????? 4227858432 ????? (4,2 GB), 942,633 c, 4,5 MB/c After that I wanted to create new filesystem using fdisk: root@yurko-laptop:/home/yurko-laptop# fdisk /dev/sdb You will not be able to write the partition table. WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 4227 MB, 4227858432 bytes 4 heads, 63 sectors/track, 32768 cylinders Units = cylinders of 252 * 512 = 129024 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 18 32768 4126596 b W95 FAT32 Command (m for help): fdisk showed that the partition still exists and I can't write the partition table. I tried to delete the existing partition: Command (m for help): d Selected partition 1 Command (m for help): w Unable to write /dev/sdb root@yurko-laptop:/home/yurko-laptop# Why am I not be able to write the partition table? Does it mean that some hardware failure occurred? And is it possible to repair the current USB drive? I've tried to use hdparm and it showed that the readonly flag is on: root@yurko-laptop:/home/yurko-laptop# hdparm /dev/sdb /dev/sdb: SG_IO: bad/missing sense data, sb[]: f0 00 05 00 00 00 00 0a 00 00 00 00 26 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 multcount = 0 (off) readonly = 1 (on) readahead = 256 (on) geometry = 1016/131/62, sectors = 8257536, start = 0

    Read the article

  • How to install software on Amazon EC2 Windows instance?

    - by JohnIdol
    I've never used Amazon EC2 - I am thinking to test a few instances for running intensive computation processes I have a requirement for rather than buying real hardware. I am given to understand the thing is quite easy to setup - but I have no clue of how it actually works. Can I upload disc images and install just any software as on any other virtual machine or is there any significant difference? Any help appreciated!

    Read the article

  • Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

    - by techaddict
    Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

    Read the article

  • Unable to edit CIFS Share permissions

    - by Datapimp23
    Hi, I have this backup Disk to disk device HP Storageworks 2540i. Managing the device is via a web interface. I joined the device into our AD domain in the CIFS server configuration. I then created a CIFS share called backupdata. If I try to access it I'm prompted for a login. The permissions tab in the web interface is empty. The following message is displayed. "CIFS Authentication is managed through Active Directory" However I do not find the share in AD. I forced replication between all DCs and I do not find it. Is there another way to edit the permissions?

    Read the article

  • Using 2-port LSI 2308-8e card to control 24 SAS HDDs

    - by GregC
    I would like to rely on a RAID-on-chip solution to control 24 SAS hard drives in a direct-attached environment. How would you approach this to get best bandwidth given that I'd like to spend less than $10,000 on the interconnect. I've read that LSI 2308 chip can easily handle 8-drive SSD RAID6 in hardware. I'd like to harness its power to control 24 SAS hard drives over an expander in an external enclosure. Currently I use an Infortrend S24S-G2240 external enclosure. It provides its own controller and expander. I'd like to use LSI 2308 controller for RAID6 somehow instead of the mystery controller in the enclosure. P.S. I tried to create SAS-expander as a tag, but my rep on this site is low.

    Read the article

  • Is it generally a bad idea to have other types of virtual appliances installed along side a firewall

    - by MGSoto
    I want to run my Firewall/NAT software (pfsense) and an internal NAS (looking at freenas right now) for my SOHO on one machine. Right now I have them separated on two different machines, but I'd like to consolidate them. Is this generally a bad idea? I see the security concern where if the firewall or host OS is compromised, then your data is essentially screwed. But is it really a concern for me?

    Read the article

  • Recommendations for USB flash drive fast at writing small files

    - by Andrew Bainbridge
    I want a drive that I can be used as my work drive, storing a Subversion repo and sandbox for a small project. I'd also like it to be able to store a DVD rip. At the moment I've got a Super Talent pico-C 8gb. It's fast at reading and writing DVD rips, but the performance on small files (ie less than 4k) is utterly terrible (we're talking floppy disk speeds here). This Ars review measured a similar Super Talent drive and pretty much confirmed my measurements (take a look at the random write speeds on page 5). So, I'm looking for a 8gb or bigger drive that doesn't suck at read and write of small files and still has acceptable performance for very large files.

    Read the article

  • alias name in brocade

    - by wildchild
    how do i look for alias name using the WWN in brocade. Say i have created an alias "CentosNode2Port1" using switch show i get the WWN ,but how to look for the alias name. alishow (WWN) is not accepting. please help

    Read the article

  • Architecture behind live streaming [on hold]

    - by l19
    I'm a Comp Sci undergraduate student, and I'm currently trying to understand the architecture behind streaming. I hear several terms and I'm not quite sure how they are related (e.g. streaming, broadcasting, ingesting, etc.) Is there a blog post or book that explains: How it all works in a high-level view (the workflow) The architecture (i.e. I capture content using my camera and want to display it real-time to an audience. I imagine that the content will be transferred to a server, but how does that server transmit the information to several users simultaneously?) Thanks!

    Read the article

  • Saving music wisely: Why save 'Queen - Bohemian Rhapsody.mp3' millions of times?

    - by hsmit
    As far as I'm concerned, Queen's song 'bohemian rhapsody' is one of the most popular songs all time. But for the purpose of this message you may replace this with another track. At the same time I think 60% of the digital-music listeners have this track. Sometimes we have multiple copies: different versions of the track, different devices, unwanted duplicates in download folders, itunes folders etc.. Wouldn't it be much smarter to store these songs only once? You can imagine various solutions for this. How would you accomplish this? Some criteria that may help you find an answer: It must reduce disk space It must remember which music belongs to you (DRM) It must use network traffic efficiently

    Read the article

  • 4K sectors: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors? Are 4K sectors a

    - by Chris W. Rea
    I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >