Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 95/306 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• When is it time to buy a new hard drive, and what considerations go into buying a new hard drive?

  - by user1125620

  I've had my current hard drive for about 4-5 years now, and I've never had a problem with it before, but now it's making whirring noises. It's done this before and, last time, the noise did go away the next day, but I have accumulated quite a bit of information that I wouldn't want to lose on the drive. HD Tune Pro and Berlac Advisor both said the drive was healthy, and I wouldn't want to get a new one unless it was absolutely necessary or was going to show drastic performance improvements. My only knock against the drive would be that Visual Studio takes longer to load than I'd like it to. HD Tune Pro says the average read speed is 54.3MB/s. I'm not sure if that's good or bad, but it seems about average compared to similar drives on http://www.hdtune.com/testresults.html. Model #: WDC WD5000AAJS-22YFA0 So, should hard drives be replaced after a certain amount of time? Has mine reached that point? Would a new hard drive be any faster?

  Read the article

• Is there a way to force Windows to recognize a network folder as a local drive, for the purposes of

  - by NoCatharsis

  I just started using the file search program Everything at work to search through documentation on our shared drives. This is after disappointments with Google Desktop and Windows Search. I love the speed of Everything, but I wish it were able to index other shared folders. My makeshift solution was to somehow force Windows to recognize the necessary shared folders as local drives, then add them to the index list. I have also considered using SyncToy, but this requires downloading all data to my drive, which could be terabytes of information - obviously not a good idea on a small company network. What would be the best solution here?

  Read the article

• To Run Linux (Ubuntu) on Windows 7, is using Virtual PC one of the best ways?

  - by Jian Lin

  I need to try Linux (Ubuntu) and feel hesitant to install Ubuntu on top of a Win 7 machine to dual boot (might need to use Win7 and Ubuntu at the same time). Is creating a Virtual PC on Win7, and then installing the latest Ubuntu on that Virtual PC one of the better option? So I think I can create a Virtual PC with an empty virtual hard disk (vhd), say, for 30GB, and then put in the Ubuntu DVD-R or CD-R to install Ubuntu onto that empty hard disk. Update: for some reason, the first time Ubuntu 10.04 installation CD-R boots up, it asked for the Language, and "Install Ubuntu" and then the screen has vertical green bars and then the VPC just closed. The 2nd or 3rd time it booted up, there is no asking of Language or "Install Ubuntu" and just shut down the VPC, sometimes with vertical green bars. I even created another new hard drive and same thing happened. And created VPC 02, and same thing happened. Created VPC 03 with a fixed hard drive size of 60GB and same thing happened.

  Read the article

• Macbook Drivers for Windows 7

  - by Kaan

  I have a hard drive which I removed from my HP Laptop and plugged into my Macbook. Windows 7 started well and then installed graphic driver but the others (sound, touchpad) were not recognized by the operating system. What should I do? Edit from OP Sorry for writing here. I don't know why but my account is not associated with this post. First, I have Tiger CD but problem is neigher my Macbook, nor my Desktop PC can read the CD. I have downloaded Driver's from Apple (http://support.apple.com/kb/DL74) but it's not working. I mean, when I double click the exe file, It gets listed in process list int task manager but after 5 seconds, I disappears. But somehow, Windows recognized my audio device and installed its driver. Microphone is ok but red light is on.

  Read the article

• What does the the reconstruction process of mdadm do exactly on raid10

  - by Azrael

  I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

  Read the article

• Is it safe to use an IDE to SATA power adapter for an extended period of time?

  - by qwertymk

  I just bought a computer from HP and they failed to include SATA power connectors with the power supply other then the one HD and DVD drive. Meanwhile I have two IDE to SATA power adapters that came with my "USB 2.0 to SATA/IDE cable" http://www.amazon.com/USB-2-0-SATA-Cable-Adapter/dp/B001OORN06 3rd pic on the left. I was wondering if I would just open up my computer and use it to plug it my SATA drives to the IDE power sources and mount it to the motherboard, would it damage my drives in the long run or have any other significant effects. A friend told me he knows people who have had their HD burn out because of this

  Read the article

• How do I recover a RAID 1 volume on Mac OS X (10.7)?

  - by Avry

  I have a Synology NAS that I've set up with RAID 1. The device is set up with two drives, both the same size (i.e. 500 GB each), formatted in ext3, as a RAID 1 volume (i.e. even though the total capacity is 1TB, I effectively only get 500 GB). In the case of a device failure where I can only access one of the drives, how can I recover my data? The solution I'm looking for is something like: 'Put the working drive in an enclosure, and use <some software> to recover your data.'

  Read the article

• How do I execute a script or program on Windows Shut Down

  - by Subhen

  I want to run a exe or bat file when window shut down? I want to unmount few drives , which are mounted by my application , when user shutdown the system. For that I need to execute another exe on shutdown, which will disconnect drives mounted by my app. I got few links which shows we can create a entry in Group Policy to execute a programe while window shut down. I am not sure how I can add a entry to Group ploicy by C++ code. Again , group policy doesn't work with Win Vista. Any other better approach ?

  Read the article

• Would hybrid drive work after SSD failure

  - by lulalala

  Hybrid hard drive combines SSD with traditional hard drives. I know that SSD can fail much often than traditional hard drives. So I want to ask that, when the SSD part of the hybrid drive fails, would I still be able to use the traditional hard drive? If it won't work like that, then I will consider add-in SATA cards instead, as it delegates risk much better. EDIT: I guess it differs from model to model, so if yes what models would work. (I am evaluating Seagate DX for now)

  Read the article

• Can't change current working directory to external drive in Windows

  - by Tom

  I'm trying to run a program located on an external USB disk using the Windows command prompt. I'm running Windows 7 64-bit (running in VMWare Workstation 8.0.) Here's what happens: I plug in the USB disk and it appears as drive letter 'E' in My Computer. I launch cmd from the start menu. I notice the prompt displays C:\Users\Tom> I type cd E:\ I notice the prompt displays C:\Users\Tom> (cd also yields C:\Users\Tom>) I can explore the drive using explorer.exe just fine, and it is connected according to VMWare Workstation. What am I doing wrong?

  Read the article

• Deleting Time Machine in Mac OS X 10.6.4

  - by cappuccino

  Does anyone know how to delete Time Machine in Mac OS X 10.6.4? Before answering: sudo rm -rf /whateverthetimemachineis does not work Disabling the ACL permissions first with sudo fsaclctl -p /whatever -d does not work, sudo: fsaclctl: command not found Use the delete all backup feature in Time Machine... this is slow as hell, would take days. Need a command line solution. No I don't want to reformat the drive, I have other content on it, and no don't say I should have separated on two partition or two drives, I did it this say since partitions cannot be dynamically changed, and two drives is annoying since, whats the point of having a big drive?... plus has no relation to the issue at hand. Already googlied for hours and read everything on Super User, nothing working. and all solutions are the first 4. Any clues?

  Read the article

• spontaneous hard disk password

  - by sc

  I had an HP proliant server go down recently. All of the sudden the sas controller (e200i) would not see any of the physical disks. New disks were detected just fine. I thought it was odd that all 6 disks would go down at one time so sent them to a data recovery firm to find out what happened. I'm being told that, somehow, all of the disks were spontaneously password protected. These are Hitachi 2.5" drives and I guess this is something of a known issue. The company has worked for a while to try and recover them, with no luck. Has anyone had experience with this? Any recommendations for how to recover the drives or a company that might have the expertise to do so?

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• Blank screen after grub menu

  - by Tim

  I just rebooted an Ubuntu Server 10.04. After choosing boot options in the grub menu, though, it just displays a black screen with the blinking white underscore in the upper-left corner. The machine has had (hardware) trouble with networking before, but the problem remains after 10 minutes, so I don't think it's the problem now. Booting into recovery mode or using earlier kernels yields the same problem. This also happens if I boot from another hard-drive. I haven't yet tried to boot from CD as the machine lacks a CD reader. How should I diagnose the problem? Update: My boot options are: recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 567[redacted] linux /boot/vmlinuz-2.6.32-29-generic root=UUID=567[redacted] ro quiet splash initrd /boot/initrd.img-2.6.32-29-generic Update: Also, I cannot access the virtual terminals (ctrl+alt+Fn).

  Read the article

• Upgrading HP DL185 G5 8LFF, is using a Dell J1520 4-Drop SATA Adapter possible?

  - by jpreed00

  The HP DL185 G5 8LFF model supports 8 3.5" drives and 1 optical drive. However, instead of the optical drive, I'd like to have 2x 2.5" drives instead. The problem is that the PSU has no more SATA power cables (even though the motherboard has 4 additional SATA data ports). The PSU does have a free 10-pin connector and it looks like the J1520 cable from Dell would fit the bill. Link to cable description Does anyone have any experience using these cables? Are they safe? Any other ideas for adding the disks to the server if I don't use the cable? Thanks!

  Read the article

• New harddrives failing within weeks.

  - by Jason Kealey

  I've experienced 8 hard disk failures in 3 months and have tried many things to solve the issue permanently but I have failed. I would like to know if you have any advice for me. System was running Win XP on an Asus P5W-DH Deluxe. I have setup a RAID-1 array. I started out with 2 x 500 GB 7200RPM Western Digital drives. One died. I took it out to RMA it. On the same day, the router was fried. Assumed a power surge occurred; connected an older UPS to protect the system. Once I got my hands on an identical disk, I installed it. The RAID array was rebuilt. A few days later, the other one died. Assumed the rebuild caused it to fail. Took it out for RMA. Before the other one arrived, the remaining one died. I then discovered I could re-enable them using the Intel Matrix Storage Manager. I re-enabled both and the system seemed fine for a week, until both died again. I got two new 1.5 TB 7200RPM Seagate drives and re-installed Windows 7. Also replaced the UPS and power supply. They both died again. The voltage on the plug is stable between 120 and 122V as per the UPS. None of the other devices have had any problems (monitors, etc.). At this point, I see two options: a) electrical issue in the house that was, for some reason, not blocked by the UPS. b) something else inside the system causing surges? motherboard? onboard raid controller? Failures happen fairly quickly, between 2 and 14 days after I fix the previous issue. I just gotten a new computer (Core i7) to replace it. If it is stable, I can determine that b) was the problem. If it fries its hard drive again, I can determine that it is an electrical issue in the house. Do you have any other thoughts? Any tools I can run on the drives that failed to get more information about the original SMART event history?

  Read the article

• Computer doesn't boot, continuously restarts; possible disk error

  - by Olcay Ertas

  I have shut down my computer two hours ago. When I open my computer it started restarting itself after showing the POST screen. I can open my computer with a Ubuntu Live CD or Windows installation CD. I can also open and boot my computer with my second drive, so I think something is wrong with my primary hard drive. Do you have any idea what the problem might be and how can I fix it? I am using an HP DV9087EA laptop and my primary disk is a WD500GB. I have installed Ubuntu 10.10 and Windows 7 on my drive.

  Read the article

• USB-keyboard & mouse powered off in windows-7

  - by sinned

  I have a problem with a pc where usb devices are not getting any power as soon as windows starts up (it works in preboot). This pc has no ps/2, so there is no chance for input, also not in secure boot mode. I "tidied up" using sysinternals autostart, so there is a chance I messed something up here, although I'm quite sure I only deleted some old printer drivers from autostart. I do not know how to reset this, I cant even log in because there is no input possible. I could use a linux live cd, but I don't know what to do there because there is no sysinternals from linux into a not running windows... To make things even worse, I have the windows installation completely encrypted with truecrypt, so I haven't even tried windows recovery cd yet. There is no loss of data since I can access the disc with a live-linux, I only want to use it again without resetting up everything. Any suggestions?

  Read the article

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• Desktop directory disappears in gnome-terminal, then appears again, but all files in it are deleted

  - by Ingen

  I am able to see my Desktop and with all its various links and files. But in the terminal when I try to access the Desktop directory: cd ~/Desktop I get: bash: cd: /home/administrator/Desktop: No such file or directory Then I find I am unable to access any of the files on the Desktop when I click on them although the file icons are there. Then the icons disappear after my clicking on them. Then I am able to access the Desktop directory in the terminal but the directory is empty i.e. all the files/folders have been deleted. What's going on? How can I fix this?

  Read the article

• how do I use tar -C on Snow Leopard when creating an archive ?

  - by ssc

  The man page states -C directory In c and r mode, this changes the directory before adding the following files. However, tar does not change to the directory I specify, but instead reports tar: <folder name>: Cannot stat: No such file or directory for every folder in the directory I run the tar command in. Do I really have to do something like cd <folder> && tar ... && cd - or is there a way to get this work ?

  Read the article

• ZFS Recover from Faulted Pool State

  - by nickv2002

  I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

  Read the article

• What is the fastest RAID in practise?

  - by Luke

  I'm going to be rebuilding my server, and I want much faster access to my data. I've used RAID 1 and 0 in the past, and decided upon RAID 10 (dedicated RAID card). Then someone told me to use RAID 5+0, then someone else told me to use RAID 6+0. Assuming the Hardware RAID Card supports each level, what is currently the FASTEST RAID available, given x number of hard drives? Reliability is now another factor, and I am willing to spend money on new drives if a drive (or multiple) fail. I simply want to know what the fastest RAID level is, along with some reliability for recovering from a failure

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

• Can a power loss break an hard disk?

  - by dag729

  Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >