Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 96/306 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• Stop sending packets to private IPs

  - by SlasherZ

  I have a problem that my server got locked down because it was sending packets to private IPs. My question is, what is the best solution to stop that? Here is the log that I got from my hosting provider: [Mon Jun 2 00:04:36 2014] forward-to-private:IN=br0 OUT=br0 PHYSIN=vm-44487.0 PHYSOUT=eth0 MAC=78:fe:3d:47:3d:20:00:1c:14:01:4e:cd:08:00 SRC=78.46.198.21 DST=192.168.249.128 LEN=1454 TOS=0x00 PREC=0x00 TTL=64 ID=58859 DF PROTO=UDP SPT=41366 DPT=41234 LEN=1434 [Mon Jun 2 00:17:15 2014] forward-to-private:IN=br0 OUT=br0 PHYSIN=vm-44487.0 PHYSOUT=eth0 MAC=78:fe:3d:47:3d:20:00:1c:14:01:4e:cd:08:00 SRC=78.46.198.21 DST=192.168.249.128 LEN=1456 TOS=0x00 PREC=0x00 TTL=64 ID=52234 DF PROTO=UDP SPT=55430 DPT=41234 LEN=1436

  Read the article

• Is there a way to force Windows to recognize a network folder as a local drive, for the purposes of

  - by NoCatharsis

  I just started using the file search program Everything at work to search through documentation on our shared drives. This is after disappointments with Google Desktop and Windows Search. I love the speed of Everything, but I wish it were able to index other shared folders. My makeshift solution was to somehow force Windows to recognize the necessary shared folders as local drives, then add them to the index list. I have also considered using SyncToy, but this requires downloading all data to my drive, which could be terabytes of information - obviously not a good idea on a small company network. What would be the best solution here?

  Read the article

• ZFS Configuration advice

  - by rbarrette

  I need some advice on configuring ZFS. Here is what I have: Physical Disks: 4x 3 TB 2x 2 TB 2x 1 TB What is the best configuration for my Vdevs and storage pool. I want to maximaze space but still maintain redundancy. Should I just get 2 more 3TB's and just create 2x 3-3TB raid2z storage pools? Create a 1x 4-3TB raidz2 vdev? Can I put redundancy at the pool level and create individual vdevs for each drive and then add 2x 1TB+2TB striped vdevs to keep all vdevs the same size. Keep in mind I do need to migrate data from the smaller drives and am planning on adding more 3tb drives later on. What do you think?

  Read the article

• SATA Devices not showing up when in UEFI mode

  - by Dan Barzilay

  I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD (it's just not there). The weird thing is that when set to LEGACY mode they all show up.. SATA mode is set to AHCI and I'm on Lenovo Y510P. I have a Linux OS installed that is accessible only when BIOS is in LEGACY mode (otherwise the hard drive it's on is not available) I also tried reseting the BIOS settings which didn't help.. Comment please if more details needed Extra details: Computer model: Lenovo IdeaPad Y510P (not overcloacked) Installed Linux OS version: Linux 3.7-trunk-amd64 x86_64 Trying to install Windows: Windows 7 Ultimate 64bit BIOS Information: Vendor: LENOVO Version: 74CN26WW(V1.07) Update: Using user1608638 answer and suggestion of using the USB flash drive as the boot device instead of the CD/DVD method I succeeded in installing Windows 7! (Thanks alot user1608638)

  Read the article

• spontaneous hard disk password

  - by sc

  I had an HP proliant server go down recently. All of the sudden the sas controller (e200i) would not see any of the physical disks. New disks were detected just fine. I thought it was odd that all 6 disks would go down at one time so sent them to a data recovery firm to find out what happened. I'm being told that, somehow, all of the disks were spontaneously password protected. These are Hitachi 2.5" drives and I guess this is something of a known issue. The company has worked for a while to try and recover them, with no luck. Has anyone had experience with this? Any recommendations for how to recover the drives or a company that might have the expertise to do so?

  Read the article

• how do I use tar -C on Snow Leopard when creating an archive ?

  - by ssc

  The man page states -C directory In c and r mode, this changes the directory before adding the following files. However, tar does not change to the directory I specify, but instead reports tar: <folder name>: Cannot stat: No such file or directory for every folder in the directory I run the tar command in. Do I really have to do something like cd <folder> && tar ... && cd - or is there a way to get this work ?

  Read the article

• Raid-3 like software backup tool

  - by Chronial

  I have a lot of data (about 7 TB), stored across multiple hard-drives with varying sizes. I would like to have a backup of that data to be safe against drive failure. A RAID is not a good option for me, as I want to keep my cost low and be able to easily extend the storage capacity of my setup by buying an additional HD. I remember seeing a piece of software that generates parity data over all drives and stores that on an extra drive. That solution protects the setup from hard drive failure and works with varying drive sizes (as long as the parity drive is the biggest one). But I can’t seem to find that software again. Does anybody now what I’m talking about or have any other solution for my situation?

  Read the article

• formating a hard drive for use in an asus aspire one d250

  - by paynes_bay

  I have an Asus Aspire One D250 that's out of warranty and whose hard drive is giving the click of death. I'm trying to use a spare SATA HDD I have but am having some difficulty. I have a USB CD drive that I plugged into the computer but when I tried to boot off of a Windows XP SP3 install CD the hard drive wasn't recognized. I tried to format the hard drive in another computer and then plug the hard drive into the Asus Aspire and although this gets me to the Windows XP loading screen it crashes before it gets into Windows, itself. Even in Safe Mode. I also tried to install Windows XP off of a USB stick but it seemed to hang during the install process. As in the next day it was still in the blue screen installer. Any ideas?

  Read the article

• Desktop directory disappears in gnome-terminal, then appears again, but all files in it are deleted

  - by Ingen

  I am able to see my Desktop and with all its various links and files. But in the terminal when I try to access the Desktop directory: cd ~/Desktop I get: bash: cd: /home/administrator/Desktop: No such file or directory Then I find I am unable to access any of the files on the Desktop when I click on them although the file icons are there. Then the icons disappear after my clicking on them. Then I am able to access the Desktop directory in the terminal but the directory is empty i.e. all the files/folders have been deleted. What's going on? How can I fix this?

  Read the article

• Maximum hard drive space for an Xserve G5

  - by wjlafrance

  At my college we're upgrading an Xserve G5 (RackMac3,1) to be a file server for some courses. Currently it has one sled with a 75GB drive. Obviously, this isn't enough. I've tried some Googling on this matter and I'm hearing a ton of different stuff - custom firmware, size issues, etc. So, for anyone who knows, what's the actual lowdown on this machine. We want to put in three 2TB drives using three standard sleds, replaced with third-party drives. Is this possible?

  Read the article

• Windows boot iso file without press any key

  - by gln

  I'm trying to make an iso file which will boot without any key-press from the user. In Windows iso files, when booting from a cd, there is a message "press any key to boot from cd" which will wait for 5-10 seconds and then, if there is no key-press, it will boot from HD. I searched the web for how to remove this message, and do not press any key and all the answers were "delete bootfix.bin" from the iso. I edited the iso (I've tried several iso files) to remove the bootfix.bin, but now the iso is not correct. Do you have any suggestions?

  Read the article

• Black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• NVidia raid 5 array spooling sounds and delay

  - by Chase B. Gale

  I've had a raid 5 array setup with 3 2TB WD Green drives for about 3 years now. Starting last week, when I would access the array for the first time, I hear a loud drive spooling sound and experience a ~5 second delay before being able to access\save files. This behavior happens when I don't use the array for some time (about an hour) and after occurring it doesn't happen again if I continue to access the array. I've run SMART scans on all drives and they come back as being a-ok. What's causing this? Is my array getting close to death?

  Read the article

• Empty DVD Drive indicates it has music in it (CDFS)

  - by Amado Colberg

  I have a Windows 7, 64 bit computer with a Blu-ray DVD drive. When I first start the computer, the DVD drive indicates it has music in it, but it is empty. If I put a CD in it, it will not Autoplay. But, if I open the drive and close it again, it will Autoplay and will no longer act as if it has a music CD in it. I've checked the drive with Plextor Utilities and it says it is working OK. I would appreciate any help with this.

  Read the article

• Can a power loss break an hard disk?

  - by dag729

  Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

  Read the article

• How can one implement RAID1 with a Dell Latitude laptop containing one normal hard drive, and one hard drive in an external bay?

  - by user12583188

  OS: Win7 professional Laptop: latitude e6420 The answer to this question should address how to deploy RAID1 software wise on a dell latitude e6420. I have two Hitachi Z5K500 320GB drives (new). There is one hard drive (320GB capacity) in the system now, which contains the current installation that I would prefer to keep. The drive currently inside the laptop will be replaced with one of the Hitachi drives, and the other Hitachi drive will be fitted into the laptop by way of a Dell hard drive "caddy" enclosure, which inserts into the media bay of the laptop (you remove the cd-rom bay, insert hd-bay).

  Read the article

• Windows 2008 Best Raid Configuration

  - by Brandon Wilson

  I have 4 2TB hard drives and I was thinking about using Raid 10. This would give me 4TB correct? My next question is would it be easy to add more hard drives to the raid array. For example if I bought another hard drive can I add it to the array without backing up any data? Basically I want to be able to start off with 4TB and when the space becomes full add more space as needed. If this isn't possible with Raid 10, is it possible with any Raid configuration. Any suggestions would be appreciated. Thank you.

  Read the article

• Defrag/TRIM settings for hybrid hard drive?

  - by Joel Coehoorn

  I recently acquired a momentus XT hybrid hard drive. This is a tradition spinning HDD with a small SSD portion for frequently used files. Normally, you are not supposed to defrag SSDs, as it does not help performance and can significantly reduce the life of the drive. But you do need to defrag an HDD to keep good performance. So where does that leave us for hybrid drives? Do I need to turn off defragging in Windows to preserve the SSD portion? Is the on-disk controller smart enough to handle defragging correctly? Is there some utility I need to set it up that I missed? Additionally, for SSDs you normally want to check for and enable TRIM support... but this makes no sense for a HDDs. Where does that leave us for hybrid drives? Should I try to enable TRIM or not?

  Read the article

• How to repair Windows XP Installation HDD from another PC?

  - by Matt

  My friend gave me his HDD that has Windows XP Pro installed on it to try and fix it. I don't have the XP CD to repair it, but I do have the ISO. I suppose I could always burn it.. but that's a lot of trouble because I don't have any blank CD's. I plugged it into my PC's hot-swap drive bay, and I have Daemon tools. Is there anyway I can try to repair the XP installation on this HDD from my PC without booting from it and burning my ISO?

  Read the article

• What could be causing LVM errors on first boot after install in Debian?

  - by ianfuture

  Hi, I've installed Debian (lenny) on a machine at home. It was set up during install to have a /boot partition, then the rest was encrypted, then had an LVM ontop of that, then all the other partitons inside LVM. After install completed and on first boot it asked for password to un-encrypt(same password for both drives) then it showed an error which said LVM could not find a physical device with a particular UUID or something similar. LVM install is over two HDs. One is 120GB and one 40GB. 120GB is Master on its IDE cable and this has /boot on it. 40GB is slave on the other IDE cable. Is there anything that could be done to rescue this install? Or diagnose problem? It took ages to get installed due to time spent enrypting drives and I'd rather not go through that again. :( Thanks.. Ian

  Read the article

• Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

  - by rofrol

  Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

  Read the article

• Clearing Windows file share "memory"

  - by Tom Shaw

  I'm currently upgrading a Samba file server (from 3.0.23d to 3.4.3). I have a problem on the Windows client side: if the client was accessing a UNC path or mapped drive from the Samba server before the upgrade, then after the upgrade those paths or drives are not accessible. However, I can consistently resolve the client side problem for good by rebooting the client and then re-mapping all of the mapped drives. The problem appears to be related to the client's "memory" of the pre-upgrade Samba server, which the reboot and re-map clears. I have the same issue and same fix on Windows XP SP3 and Windows Server 2003 SP2. This question is specifically: is it possible to reproduce the benefits of the Windows reboot without actually rebooting the client? I have tried restarting various Windows services, disabling and enabling the network, logging out and back in again, but nothing except a reboot appears to do the trick.

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• Most efficient RAID configuration with 6 disks?

  - by Bob King

  I have a hand-me-down server that I'm setting up at home and it's got 6 72Gb hard disks (as well as 2 18Gb drives that I'm using for the OS). What is the best way to configure those 6 drives? Should I RAID 5 or 6, or go with something simpler, like mirroring? I'm planning to use it to hold a source control repository, and possibly data for a development SQL server. The machine has a hardware raid controller. It is an old IBM server.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >