Search Results

Search found 17950 results on 718 pages for 'directory listing'.

Page 95/718 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Trouble joining Windows Server 2008 to Domain

  - by Jim R

  When I try to join my new server to my existing domain I get the following error: "An attempt to resolve the DNS name of a DC in the domain being joined has failed. Please verify this client is configured to reach a DNS server that can resove DNS names in the target domain." I have tried all of the following already: Successfully pinged the domain controller. Ping the new server from the domain controller by IP address and by DNS name. Ping the DC server from the new server by IP address and by DNS name. Changed the network to DHCP (it was originally static). No joy as static or DHCP. Turned off all firewall settings. Added the domain name to 'hosts' file. Added the server name of the primary domain controller to the 'hosts' file in the new server. Any ideas? Thanks in advance for any help! Jim Update: With help from J. Brian Kelly (Thanks) I have managed to narrow down the problem to a DNS issue. Specifically, UDP/53 packets are being sent (they are seen in Network Monitor), but are not getting to the DNS server. But, I do not yet know why. Update: The quested output from IPCONFIG for the HyperV host and the virtual machine. IPCONFIG from HyperV Server Windows IP Configuration Host Name . . . . . . . . . . . . : HYPER Primary Dns Suffix . . . . . . . : sfi-wfc.com Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi-wfc.com Ethernet adapter Local Area Connection 4: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Primary Network Physical Address. . . . . . . . . : 00-30-48-CA-CC-7A DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::cd16:3ac2:3d4f:e275%679(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.100.1(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.100.10 DHCPv6 IAID . . . . . . . . . . . : -1476382648 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-10-20-E9-00-30-48-CA-CC-7A DNS Servers . . . . . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Intel(R) 82576 Gigabit Dual Port Network Connection #2 Physical Address. . . . . . . . . : 00-30-48-CA-CC-7B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPCONFIG from Virtual Machine Windows IP Configuration Host Name . . . . . . . . . . . . : DB Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : sfi Ethernet adapter Local Area Connection 2: Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : Microsoft Virtual Machine Bus Network Adapter Physical Address. . . . . . . . . : 00-15-5D-66-03-02 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.100.128(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Saturday, August 29, 2009 10:44:45 AM Lease Expires . . . . . . . . . . : Tuesday, September 01, 2009 3:08:33 PM Default Gateway . . . . . . . . . : 192.168.100.10 DHCP Server . . . . . . . . . . . : 192.168.100.5 DNS Servers . . . . . . . . . . . : 192.168.102.5 Primary WINS Server . . . . . . . : 192.168.100.5 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 8: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : sfi Description . . . . . . . . . . . : isatap.sfi Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Local Area Connection* 9: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 02-00-54-55-4E-01 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes

  Read the article

• How to Setup Sharepoint Extranet to authenticate against a dmz AD

  - by Satish

  I have a web app which is extended to extranet for our clients to access. We have setup a different AD server and domain for dmz and clients have to be authenticated against that domain. I'm little confused about the setup especially what all web.config files I have to update. Do I have to update the web.config file for Central admin site and the extended web app. According to this blog I need to do update both, but as soon as I make the changes in the web.config for central admin, central admin site stops working. Here is what I added to the central admin web.config file between /Sharepoint and system.web I have this <connectionStrings> <add name="DMZConnectionString" connectionString= "LDAP://dmz.xxx.com:389/OU=Clients,DC=dmz,DC=xxx,DC=com "/> Between system.web and securityPolicy <membership defaultProvider=”DMZADProvider“> <providers> <add name="DMZADProvider" connectionStringName="DMZConnectionString" connectionUsername="DMZ\ldapUser" connectionPassword="Password" enableSearchMethods="true" attributeMapUsername="userPrincipalName" type="System.Web.Security.ActiveDirectoryMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" /> </providers> </membership> I know the connectionusername and password works becuase I use the same in SSP for importing profiles. Any idea what might be causing the error?

  Read the article

• Must I have Exchange to use Blackberry Enterprise Server Express?

  - by John Spaz

  In the past I've setup BES (not express) for a company that just wanted their users on the corporate network, they didn't care for email or any other enterprise feature, they just wanted to push a policy that the phones internet should be routed through the corporate network. I want to setup BES Express now for a customer that also just wants the phones on his network but wherever I look, it says that BES Express requires Exchange. Is there a way to install BES Express without Exchange and without a AD Domain? Basically what the customer wants to accomplish is to be able to filter and log the internet access on the phones.

  Read the article

• Multi-Domain Root Administrator

  - by Brent Pabst

  We have a new domain structure we are planning on rolling out in the next few months. Essentially there is a single top level and forest domain controller "mydomain.lan" and two children "us.mydomain.lan" and "pl.mydomain.lan". We want to configure an administrator account or two at the top level domain that then has full administrator permissions on the sub domains. By default the top level administrator cannot access or login to machines on the sub-domains. Running W2K8R2. Ideas?

  Read the article

• Painfully slow login to AD bound Mac OS X Leopard machine when off home network

  - by GeeBee

  Dear all Just looking for a little help with this problem that seems to trip a lot of people up and is causing me no end of grief. I have a number of fully patched OS X Leopard machines that are bound to my AD (Server 2003). When on the home network, logging in seems swift and works as expected. When users take the machines off site, login can take 5 minutes or more. The user adds correct credentials but the desktop does not appear for a very long time. Outside the office, I have tried logging in using a local Admin account, switching off Airport and then logging in using an AD account. In this situation login is immediate again. It all seems as if Leopard is finding a suitable wireless network, spending far too long looking for the Domain before eventually giving up and using the cached credentials instead. I have read that disabling Bonjour on the machine will stop this problem (i have not yet tested) http://www.macwindows.com/leopardAD.html#111607z ...but I am reluctant to use this "Solution" as I would like to be able to use Bonjour on the local network as well as having AD-bound machines. However, is disabling Bonjour really the only answer? Is there not some time-out setting somewhere that could be amended to stop Leopard spending forever looking for home? Any help would be very gratefully received Thanks Gordon

  Read the article

• IIS6 Permissions

  - by Gordon Carpenter-Thompson

  We have a set of IIS6 Jakarta/ASP.NET applications (implemented as virtual directories) on a machine without a domain. The directories all exist under the default website. We need to setup the permissions so that certain users can access only specific applications yet others users can access several of the applications. The way it's been setup previously has been to explicitly deny access to the users for every application except the ones that they are allowed to see. The problem is that the list of applications changes fairly often (for demos etc) and it's been known for the developers to forget to deny the old users access to the new applications which leads to security problems. This is all quite unmaintainable. Does anybody have any advice on this? Surely I can't be the only person to find this all a bit of a mess? Thanks

  Read the article

• Exchange 2003 - Keep user's mailbox but disable account and prevent new emails

  - by molecule

  Hi all, Just wanted to know what's your take on this... A user has left the company but may return in future. I would like to disable his AD account, archive all his emails, keep his mailbox and prevent new emails from being sent to him. What's the "best practice" method of doing this? Please enlighten and thanks in advance. What I would do: Reset AD password Change SMTP address - leading to NDRs if new emails are sent to his/her previous address Logon as him/her and archive emails Disable AD account Hide address from GAL

  Read the article

• GlusterFS with CIFS, quotas and LDAP

  - by lpfavreau

  Has anyone had experience plugging GlusterFS and Openfiler together or something similar? Here is the motivation: Disk space on multiple server regrouped using GlusterFS Centralized access using LDAP/AD and quota management using Openfiler as the GlusterFS client SMB/CIFS server for easy sharing to multiple users on Mac and Windows I know I can have Gluster installed on Openfiler (rPath Linux) successfully but Openfiler seems to be very picky on what it can use as a shared drive. Mounting the Gluster volume inside an existing share does not seem to allow quotas with the mounted folder free space. If this is not possible, is there any alternative to give the same capabilities?

  Read the article

• How to find the computer name a user logged on to

  - by V. Romanov

  Is there a tool or script or some other way of knowing what computer name a specific user is currently logged on to? Or even was logged on to? Say the user "HRDrone" is working on his machine whose hostname is "HRStation01". I, sitting at my sysadmin desk, only know that the username is "HRDrone". Any way i can find out that he is logged on to "HRStation01" without asking the user? AD event viewer? anything? Thanks!

  Read the article

• Applocker custom extension (Java, CPL, MSC etc.)

  - by test1839

  We have a Terminal server and want to prevent users from running inappropriate software. Previously we used Software Restriction Policies for this purpose. Now, Microsoft seems to recommend Applocker instead. However we found no possibilities to add custom extensions like JAR, CPL, MSC etc. which was possible in Software Restriction Policies. Do you know how to add custom extensions to the Applocker policies in Windows 2008? Or how can we block custom script interpreters like Perl etc.?

  Read the article

• The session setup from the computer <computerName> failed to authenticate.

  - by TheCodeMonk

  Every once in a while, I get a client PC that won't be able to log into the domain. This morning it was telling us that the trust relationship between the pc and the domain failed. I checked the event logs on the primary domain controller and I see this for 2 PCs (the one that had the problem and one that can log in today). The session setup from the computer failed to authenticate. The name(s) of the account(s) referenced in the security database is . The following error occurred: Access is denied. I know how to fix this, by rejoining the PC to the domain... But why does this happen and how can I prevent it so I don't have to keep rejoining PCs to the domain?

  Read the article

• Share Exchange/Outlook calendars between two different domains

  - by Jon

  Can this be done? Two organisations, complete separate domains and exchange servers. Do I need a AD trust? Can data be shared over HTTP or does it require a VPN connection? One Org will have an Exchange 2010 server, the other 2007.

  Read the article

• trying to install lync 2010 and experiecing an error with central management store

  - by Itai Ganot

  I'm trying to install Lync 2010 and i'm getting stuck in the stage where i have to install or point to the local configuration store. I've tried finding it in the domain and without luck, any recommendations? PS C:\Users\Administrator.ASUTA> Get-csconfigurationstorelocation WARNING: No Configuration Store location has been set. PS C:\Users\Administrator.ASUTA> Get-CsComputer "$env:computername.$env:userdnsd omain" Get-CsComputer : Cannot find location of Central Management Store in Active Dir ectory. At line:1 char:15 + Get-CsComputer <<<< "$env:computername.$env:userdnsdomain" + CategoryInfo : ResourceUnavailable: (:) [Get-CsComputer], Manag ementStoreNotFoundException + FullyQualifiedErrorId : ManagementStoreNotFound,Microsoft.Rtc.Management .Xds.GetComputerCmdlet PS C:\Users\Administrator.ASUTA>

  Read the article

• How to automate kinit process to obtain TGT for Kerberos?

  - by tore-

  I'm currently writing a puppet module to automate the process of joining RHEL servers to an AD domain, with support for Kerberos. Currently I have problems with automatically obtain and cache Kerberos ticket-granting ticket via 'kinit'. If this were to be done manually, I would do this: kinit [email protected] This prompts for the AD user password, hence there is a problem with automate this. How can i automate this? I've found some posts mentioning using kadmin to create a database with the ad users password in it, but I've had no luck. Thanks for input

  Read the article

• Printer monitor software across multiple workstations (AD integrated)

  - by HannesFostie

  I was asked to see if there is any kind of (free) software that allows multiple people in an office that use the same printer to see what jobs have finished recently, which are queued and which is printing. Main reason is that sometimes multiple people have the same task where they need to print some kind of form, and they are unsure whether or not their colleague has already printed the file. Because the printer is AD integrated, they only see a short message when printing, but they do not see a proper printer queue. A simple tray icon/tool would be perfect, no real graphical user interface is required. If this turns out to be too hard to find, I will attempt to write a simple application or script for the job, but since this is a low priority job I decided to ask here first before I start messing around with scripting which isn't my forte. Thanks

  Read the article

• Prevent Exchange Server from advertising itself on domain

  - by Justin Shin

  I'm in the middle of setting up an Exchange 2010 Server. Currently, we use a SaaS provider for Exchange 2007 services. Some (but not all) of my users have been reporting that they are receiving Outlook/Exchange login prompts to login to the new Exchange server. This is happening without any intervention on the client's machines. The Exchange server is a member of the domain and connects to the domain site remotely through a site-to-site VPN. What can I do to prevent these login prompts from appearing? Will shutting down the new server until it is time to switch resolve these issues? A little more info: I found that on one of the client computers, all of the settings for Outlook over HTTP had been changed (automatically) from webmail.provider.com to mail.company.com (the latter being the new server). This happened when I enabled Outlook Anywhere access on Exchange 2010. I changed the client's settings back, and everything was groovy. But, when I disabled Outlook Anywhere again, the logon prompt came back.

  Read the article

• Is it possible to configure simultaneous authentication against 2 different AD domains by IIS 7?

  - by just3ws

  Basically, I need to be able to attempt to authenticate against two different AD domains from IIS. I'd like to be able to automatically query both AD's and whichever comes back with an authentication wins. The users are completely separate and will only exist in their respective domain.         IIS           |           |   /-------------\   |                 |  ------        ------  AD1         AD2  JoeU        AmyU  JillU         JohnU So, if IIS requests to authenticate JoeU it will query both domains. JoeU will be found in AD1 so we can ignore whatever response comes back from AD2. Is this even possible using stock IIS 7? Is there a middleware or something to allow this type of configuration on IIS 7? Would this be a job for some kind of middleware sitting between IIS and the AD domains?

  Read the article

• How do I apply WinHTTP proxy settings domain-wide?

  - by Oliver Salzburg

  We're already configuring Internet Explorer proxy settings through group policy and it works great. Sadly, I've recently run into multiple issues where those settings are ignored by certain services. I realized that these service have one thing in common. They use WinHTTP, which has its own proxy settings. Now I'm asking myself how to apply those across the whole domain. I realize that I could create a logon script and simply run netsh winhttp import proxy source=ie, but, from experience I know that these settings require a reboot to take effect. So this wouldn't help me at all in a logon script. So, how can I do it?

  Read the article

• how to configure my internal dns to resolve external resources

  - by Ralph Shillington

  I have an internal DNS as part of my AD setup. I have an hosted DNS for public resources (which are typically at some data centre somewhere) Occasionally while on our internal network I need to get to a public resource --- for example www.ourcompany.com since there isn't a www record in our internal DNS I cant get the name resolved. How do I configure my DNS to forward names it doesn't recognise to the public DNS. Update: As per the comment yes I have a "split-horizon" dns (which seemed like a good idea at the time) This AD setup is less than 24 hours old, and can be redone if need be -- (although I would rather not)

  Read the article

• Strange permission errors with Windows Server 2008

  - by Spirit

  I just don't know a better way to describe my issue that is driving me nuts. I am trying to establish a test domain with virtual machines on a box that has Win7 with VMwware workstation installed. The purpouse with this domain will be so that we can try and test different situations before they go into the production network. I build a VM with WinSrv2008R2 and I am using that VM as a template to make other servers for the domain by making clones of it. Now I raise a DC with one clone and a member server with another clone - I add the server to the domain. I am following a standard procedure as always (it is not my first domain). Then I make an admin account and I am adding the admin to be a member of the Domain and Enterprise Admins group. That admin is admin with full priviledges on the DC.. no problem there. But on the other server has ... somewhat half the privileges and I cant log in via RDP. I tryed with another account. Same issues. For example (with half the privileges): I can't open the Even Viewer if I go via Start - Administrative Tools - Event Viewer. But I can open the Even Viewer via the server manager. You can notice this on the image below. I mean WTF??? I am going crazy, I haven't experienced anything similar in my three years of expertise. I already lost 3 days troubleshooting this. Could this be related with the cloning? Perhaps if I make fresh installs of WinSrv2008 there won't be any problems? I've had raised test domains as VMs on other occasions before, and there weren't any problems then. This is VMware Workstation 8. I've made clones before, on Workstation 7 it didn't had any problems. Anyone has any ideas? UPDATE: This is the info from the event log when I try to access via RDP: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: pat.coleman Account Domain: lab Failure Information: Failure Reason: Domain sid inconsistent. Status: 0xc000006d Sub Status: 0xc000019b

  Read the article

• How to find the computer name a user logged on to

  - by V. Romanov

  Hi guys Is there a tool or script or some other way of knowing what computer name a specific user is currently logged on to? Or even was logged on to? Say the user "HRDrone" is working on his machine whose hostname is "HRStation01". I, sitting at my sysadmin desk, only know that the username is "HRDrone". Any way i can find out that he is logged on to "HRStation01" without asking the user? AD event viewer? anything? Thanks!

  Read the article

• Mystery "users" email group

  - by dangowans

  This morning, our entire company received a spam message sent to [email protected], where "ourdomain.on.ca" is our actual domain. There is a distinguished name that this could correspond to: CN=Users,DC=ourdomain,DC=on,DC=ca Looking at the attributes though, there is no mail, no proxyAddresses, no signs that there is a mailbox configured there. I did some LDAP queries, searching for: (proxyAddresses=smtp:[email protected]) ([email protected]) But am not seeing any records. (I also search for known email addresses to ensure the tree was being searched properly.) We are running Exchange 2003. Is there another place to look for group email addresses? Is it possible that the distinguished name is being automatically translated to an email address?

  Read the article

• How to conigure windows group policy to limit browsing

  - by John Hoge

  Hi, Is there any way to configure group policy on a windows 2003 server to restrict/block external web access to certain groups of users? Thanks, John

  Read the article

• AD domain on web servers behind NAT - DNS issues?

  - by Ant

  I'm trying to setup an AD domain to manage the security between two Windows Server 2008 webservers that will sooner or later use NLB to balance website requests. I've hit a problem which I think is a simple solution and is down to DNS. My website domain is mydomain.com. The two servers are running behind a NAT firewall on the 10.0.0.0 IP range. I've setup the AD domain to be called ad.mydomain.com (as recommended by MS and a few other answers to questions on here). The second web server however doesn't want to join the domain, and gives an error pinning the problem on DNS - "ensure that the domain name is typed correctly" even though it queries the SRV record successfully and gets the correct DC back - dc.ad.mydomain.com. Doing a dcdiag /test:dns on the DC gives the Delegation error 'DNS Server dc.mydomain.com Missing glue A record'. I have a feeling I need to add something to the public DNS so that it in some way knows about ad.mydomain.com. Can anyone suggest whether I'm on the right track in adding something to the public DNS? Or whether it's something else? Many thanks

  Read the article

• Dsquery nested groups

  - by Doctor Trout

  Hi there, How would I write a dsquery to get a list of all the members of a d-list, expanding any nested groups to get the members of those groups? I've written this: dsquery * -filter "(&(memberOf=cn=...))" -r -limit 0 -attr CUSTOMFIELD sAMAccountName displayName > export.txt but returns nested d-lists and I want to expand these. I then tried this: dsquery group -samid "NAME | dsget group -members -expand > export.txt But this just lists the OU of each member and I want to get the Account Name and a custom field returned. Is there any way, either of chosing which fields to return from dsget or to epxand dsquery to show nested group membership? Thanks.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >