Search Results

Search found 11493 results on 460 pages for 'customer success'.

Page 96/460 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • systemctl enable differs from systemctl start, how?

    - by rudi_visser
    I am running an Arch Linux (latest, up-to-date) box, and attempting to get MySQL to start at boot. With the systemd package installed I have systemctl available, and as such I can do things like this: systemctl start mysqld.service systemctl [stop|status|restart] mysqld.service That's all fine, and works great when I want to start/stop manually, however, when it comes to getting it to start at boot (by using 'enable' on systemctl, I get some nasty output): [root@rudivarch ~]# systemctl enable mysqld.service Failed to issue method call: No such file or directory Obviously, since the other commands work just fine, I'm seriously confused by this and have spent a good while trying to figure it out... systemctl status outputs this: [root@rudivarch ~]# systemctl status mysqld.service mysqld.service Loaded: loaded (/etc/rc.d/mysqld) Active: inactive (dead) since Tue, 31 Jan 2012 15:32:28 +0000; 1min 25s ago Process: 589 ExecStop=/etc/rc.d/mysqld stop (code=exited, status=0/SUCCESS) Process: 257 ExecStart=/etc/rc.d/mysqld start (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/mysqld.service Anybody have any ideas as to why 'enable' doesn't work?

    Read the article

  • Must I have Exchange to use Blackberry Enterprise Server Express?

    - by John Spaz
    In the past I've setup BES (not express) for a company that just wanted their users on the corporate network, they didn't care for email or any other enterprise feature, they just wanted to push a policy that the phones internet should be routed through the corporate network. I want to setup BES Express now for a customer that also just wants the phones on his network but wherever I look, it says that BES Express requires Exchange. Is there a way to install BES Express without Exchange and without a AD Domain? Basically what the customer wants to accomplish is to be able to filter and log the internet access on the phones.

    Read the article

  • My Macbook Pro doesn't give any reaction when pressing the power button

    - by Juri
    An hour ago I closed the display my Macbook Pro. it goes into sleep mode. After dinner I returned, opened the display and wanted to continue with my work, but I recognized it was switched off completely. I tried to press the power button and received nothing. I also noticed that the green light on the power supply plug which is plugged into my Macbook is off. Same thing with a power supply from the Mac of a friend of mine. What could I try? Some suggestions? What could be the problem here?? I already tried using the battery to start, no success, also taking the battery out completely, no success. Even if I press the small button for showing the current battery charge, none of the leds starts. It's like the Mac is completely dead.

    Read the article

  • Can I split a spreadsheet into multiple files based on a column in Excel 2007?

    - by geofftnz
    Is there a way in Excel to split a large file into a series of smaller ones, based on the contents of a single column? eg: I have a file of sales data for all sales reps. I need to send them a file to make corrections and send back, but I dont want to send each of them the whole file (because I dont want them changing eachother's data). The file looks something like this: salesdata.xls RepName Customer ContactEmail Adam Cust1 [email protected] Adam Cust2 [email protected] Bob Cust3 [email protected] etc... out of this I need: salesdata_Adam.xls RepName Customer ContactEmail Adam Cust1 [email protected] Adam Cust2 [email protected] and salesdata_Bob.xls Bob Cust3 [email protected] Is there anything built-in to Excel 2007 to do this automatically, or should I break out the VBA?

    Read the article

  • "error 1723 there is a pr*blem with this windows installer package a dll required for this install to complete could not be run" while uninstall java

    - by user1650410
    I am having the following problem:I've installed java 1.6u33 on my windows 7 machine.Everything was fine, i was running eclipse for example.But i did a mistake -i deleted the jre6 dir.Now i am trying to reinstall java with no success.I got this msg when i try to uninstall it: "error 1723 there is a problem with this windows installer package a dll required for this install to complete could not be run..."I've deleted everything i had found for java in the registry,the Java dir, also tried JavaRa.I saw in MSI**.LOG files what dll is mising and put it where it was searched for.No success. So is there a way i can reinstall java without reinstalling windows?

    Read the article

  • Freezing with black screen after booting OS with AMD Catalyst driver

    - by Oleg
    I have ATI Mobility Radeon HD 5470 on my HP laptop. A few weeks ago I was confused with a weird trouble in proprietary drivers for my graphics card. When I start X server (or just boot Windows) system sometimes totally hangs up with black screen. The most annoying thing is that issue appearing is absolutely random (2 success, 3 fails, 1 success, 7 fails, etc.). It appears both on Linux (Arch, Debian 7) and Windows XP. I've tried reinstalling OS, drivers, etc. I've also tried updating BIOS. Then boot was successful for the next few times and issue appeared again (probably it was just a coincidence, because another BIOS updates gave no results). I really don't know what to do. Any ideas?

    Read the article

  • Proven and Scalable Comet Server

    - by demetriusnunes
    What is the most proven, scalable comet server solution out there that can handle up to 100.000 real-life connections per node using HTTP streaming (not long-poll)? It must be a free, preferably open-source project. We've already tried Meteor (Perl), with no success. Meteor was able to scale just up to 20.000 connections per node. We are looking right now at these options: APE (C++), Orbited (Python), Grizzly (Glassfish), Cometd (Jetty). Any big success stories with any of these?

    Read the article

  • Remove all HTTP bindings from an IIS 6 site while leaving SSL bindings

    - by MikeBaz
    We have a (remote, via a reseller) customer who configured their IIS6 server to not have any port 80 HTTP bindings, only port 443 SSL bindings. We would like to reproduce this without going through the three layers (!) to get to the customer to test some error scenerios. However, whenever I try to get IIS to not listen on IIS at all, I can't do it. If I do it in the UI, either leaving in the main properties page, or in the advanced bindings page, the UI does not let me proceed. If I remove the HTTP ServerBindings from the metabase.xml directly, IIS makes it port 80, all unassigned addresses anyway. Is there a way to get to the "SSL only" state naturally? Please note I am NOT talking about the "require SSL" checkbox or underlying metabase setting, as that still listens on port 80 (or whatever) to give the "SSL required" error message. I'm talking about not having any bindings listed at all for HTTP.

    Read the article

  • Cisco login on-failure using syslog doesn't show username on failure?

    - by Jim
    interesting issue I am running into. I am trying to get syslog rmeote logging working with a Cisco switch. i have it working and logging for both on-success and on-failure. However when it is a failed login attempt it does not show the user name that tried to log in in the logs? Here is what the log looks like after a failed login: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: ] [Source: 10.0. 0.6] [localport: 23] [Reason: Login Authentication Failed] Here is what I ahve in the sh run: login block-for 60 attempts 3 within 60 login delay 1 login on-failure log login on-success log archive log config logging enable notify syslog contenttype plaintext logging trap notifications logging facility local4 logging 10.0.0.8 aaa new-model aaa authentication login default local group tacacs+ aaa authorization config-commands aaa authorization exec default local group tacacs+

    Read the article

  • Outlook receives winmail.txt attachment instead of Excel, PowerPoint or Word attachments from Lotus

    - by Philippe
    Ok so the title pretty much says it all. We are offering a Hosted Exchange solution for our customer. Everything is working fine except for one customer complaining that he is receiving winmail.dat or winmail.txt attachments instead of the actual Word Excel or PowerPoint attachments he should be receiving, only when these messages come from a specific European senders, that is using Lotus Notes. I know that usually the problem is coming from Outlook senders to other mail clients, but this is not the first they inform me of this but I can't find anything on the matter so far. Has anyone ever gotten and solved this problem? If not, does anyone have any idea regarding this? I had solved this problem a few months ago, by upgrading Outlook to SP2 and then uninstalling it using the Service Pack removing tool of Microsoft. It seems that only the latest SP1 version could work but not the SP2. The problem is that now nothing is working at all. Thank you for your help, Philippe

    Read the article

  • Serving static files fails - nginx

    - by Sergei
    Hi, I've been looking and trying around all night, but without success. I configured nginx to serve my static files and proxy all the other traffic: server { listen 80; server_name mydomain.com; access_log /home/boudewijn/www/bbt/brouwers/logs/access.log; error_log /home/boudewijn/www/bbt/brouwers/logs/error.log; location / { proxy_pass http://127.0.0.1:8080; include /etc/nginx/proxy.conf; } location /media/ { root /home/boudewijn/www/bbt/brouwers/; } } The proxy passing is no problem, but when I go to mydomain.com/media/ or try to access any testfile over there, it's without success. I paid attention to the difference between root and alias, my media folder exists, I paid attention to the trailing slashes, but still I get a 404 when trying to access my static media files. Any help?

    Read the article

  • Postfix: How to apply header_checks only for specific Domains?

    - by Lukas
    Basically what I want to do is rewriting the From: Header, using header_checks, but only if the mail goes to a certain domain. The problem with header_check is, that I can't check for a combination of To: and From: Headers. Now I was wondering if it was possible to use the header_checks in combination with smtpd_restriction_classes or something similar. I've found a lot information about header_checks and multiple header fields, when searching the net. All of them basically telling me, that one can't combine two header for checking. But I didn't find any information if it was possible to only do a header check if a condition (eg. mail goes to example.com) was met. Edit: While doing some more Research I've found the following article which suggests to add a Service in postfix master.cf, use a transportmap to pass mails for the Domain to that service and have a separate header_check defined with -o. The thing is that I can't get it to work... What I did so far is adding the Service to the master.cf: example unix - - n - - smtpd -o header_checks=regexp:/etc/postfix/check_headers_example Adding the followin Line to the transportmap: example.com example: Last but not least I have two regexp-files for header checks, one for the newly added service, and one to redirect answers to the rewritten domain. check_headers_example: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 Obviously if someone answers, the mail would go to nirvana, so I have the following check_headers defined in the main postfix process: /To:(.*)<(.*)@mydomain.example.com>(.*)/ REDIRECT [email protected]$2 Somehow the Transport is ignored. Any help is appreciated. Edit 2: I'm still stuck... I did try the following: smtpd_restriction_classes = header_rewrite header_rewrite = regexp:/etc/postfix/rewrite_headers_domain smtpd_recipient_restrictions = (some checks) check_recipient_access hash:/etc/postfix/rewrite_table, (more checks) In the rewrite_table the following entries exist: /From:(.*)@mydomain.ain>(.*)/ REPLACE From:[email protected]>$2 All it gets me is a NOQUEUE: reject: 451 4.3.5 Server configuration error. I couldn't find any resources on how you would do that but some people saying it wasn't possible. Edit 3: The reason I asked this question was, that we have a customer (lets say customer.com) who uses some aliases that will forward mail to a domain, let's say example.com. The mailserver at example.com does not accept any mail from an external server that come from a sender @example.com. So all mails that are written from example.com to [email protected] will be rejected in the end. An exception on example.com's mailserver is not possible. We didn't really solve this problem, but will try to work around it by using lists (mailman) instead of aliases. This is not really nice though, nor a real solution. I'd appreciate all suggestions how this could be done in a proper way.

    Read the article

  • How to find what Service Pack of IE is currently installed on the system?

    - by Kanini
    Hello...We have website and one of our customers complains that when he launches the URL there is a blank popup that appears on his window. He uses IE 7. We have tried to reproduce the same behaviour in our local PC's but we are not able to do so. The site opens up perfectly fine in our systems. We suspect that it could be due to a different Service Pack installed on the customer's PC. Is there a way we can find out which SP is he running on. What would be the simplest process which we can then pass on to the customer to know which SP is he running on?

    Read the article

  • No Telnet login prompt when used over SSH tunnel

    - by SCO
    Hi there ! I have a device, let's call it d1, runnning a lightweight Linux. This device is NATed by my internet box/router, hence not reachable from the Internet. That device runs a telnet daemon on it, and only has root as user (no pwd). Its ip address is 192.168.0.126 on the private network. From the private network (let's say 192.168.0.x), I can do: telnet 192.168.0.126 Where 192.168.0.126 is the IP address in the private network. This works correctly. However, to allow administration, I'd need to access that device from outside of that private network. Hence, I created an SSH tunnel like this on d1 : ssh -R 4455:localhost:23 ussh@s1 s1 is a server somewhere in the private network (but this is for testing purposes only, it will endup somewhere in the Internet), running a standard Linux distro and on which I created a user called 'ussh'. s1 IP address is 192.168.0.48. When I 'telnet' with the following, let's say from c1, 192.168.0.19 : telnet -l root s1 4455 I get : Trying 192.168.0.48... Connected to 192.168.0.48. Escape character is '^]'. Connection closed by foreign host . The connection is closed after roughly 30 seconds, and I didn't log. I tried without the -l switch, without any success. I tried to 'telnet' with IP addresses instead of names to avoid reverse DNS issues (although I added to d1 /etc/hosts a line refering to s1 IP/name, just in case), no success. I tried on another port than 4455, no success. I gathered Wireshark logs from s1. I can see : s1 sends SSH data to c1, c1 ACK s1 performs an AAAA DNS request for c1, gets only the Authoritave nameservers. s1 performs an A DNS request, then gets c1's IP address s1 sends a SYN packet to c1, c1 replies with a RST/ACK s1 sends a SYN to c1, C1 RST/ACK (?) After 0.8 seconds, c1 sends a SYN to s1, s1 SYN/ACK and then c1 ACK s1 sends SSH content to d1, d1 sends an ACK back to s1 s1 retries AAAA and A DNS requests After 5 seconds, s1 retries a SYN to c1, once again it is RST/ACKed by c1. This is repeated 3 more times. The last five packets : d1 sends SSH content to s1, s1 sends ACK and FIN/ACK to c1, c1 replies with FIN/ACK, s1 sends ACK to c1. The connection seems to be closed by the telnet daemon after 22 seconds. AFAIK, there is no way to decode the SSH stream, so I'm really stuck here ... Any ideas ? Thank you !

    Read the article

  • OEM to Virtual Machine for Diaster Recovery / Business Continuity.

    - by James
    Hello, We are trying to deploy a Business Continuity Appliance (Zenith BDR) for a customer and one of the features is the ability to bring up the failed server in a virtual machine on the appliance. Great feature. However, the customer has OEM version of Server 2003 on that server and it comes up requiring immediate re-activation since it is now on different hardware. We would be happy with a 2-3 day grace period which is what we expected, but this isn't happening. What are the solutions without having to purchase another VLK copy of Server 2008 and re-installing the server with that license just so we can set this thing up.

    Read the article

  • SQL Maintenance Cleanup Task Working but Not Deleting

    - by Alex
    I have a Maintenance Plan that is suppose to go through the BACKUP folder and remove all .bak older than 5 days. When I run the job, it gives me a success message but older .bak files are still present. I've tried the step at the following question: SQL Maintenance Cleanup Task 'Success' But not deleting files Result is column IsDamaged = 0 I've verified with the following question and this is not my issue: Maintenance Cleanup Task(s) running 'successfully' but not deleting back up files. I've also tried deleting the Job and Maintenance Plan and recreating, but to no avail. Any ideas?

    Read the article

  • Remote support via VPN without split tunnel

    - by Robe Eleckers
    my title might not be very clear, but I'll explain my setup in more detail now. We have several customers (companies) that need to be remotely supported. At these customers we have servers running with our software that needs to be serviced. These servers are (almost) never connected to the internet. For this we have multiple PC's running VPN clients. These PC's run a VNC server so our service engineers can login from their home laptop remotely to these PC's and connect from there to our customer via the VPN connection on the PC. The problem is however that several customers do not allow split tunneling. That means that when we connect via VPN to such a customer the VNC connection drops. Our current workaround is using a Citrix VM which we control via XenCenter console, but it's quite slow. Are there common solutions to handle this?

    Read the article

  • I can not watch any videos on youtube

    - by hamed
    I can not watch any videos on Youtube with any browser ( Chrome 20 , Firefox 13 , IE 8 ). I get this error An error accurred. Please try again later. My OS is Windows 7 (32bit) and the antivirus is zonealarm extreme security 10.1.079.000 . I installed flash player 11 but no success. I exited zone alarm to watch video, but no success again and error is the same. I don't know what's the problem . I searched a lot but didn't find the problem. I'd appreciate any idea.

    Read the article

  • custom adm file for IE search providers on Windows 2003

    - by filipv
    Hi, I have been stumped by this issue for some time, I created a custom ADM template for a customer to populate the search providers in Internet Explorer 7 and 8. The custom ADM works fine and I have set 3 search providers, the problem is that I cannot change them (the customer wants to change the entry for wikipedia from EN to NL), I edited the ADM file but the clients seem to keep on using the old settings. Removing/replacing the adm file has no effect either, the settings remain. I used the following article as a base: http://support.microsoft.com/kb/918238 For IE8 you need to work with a name instead of a UID for the default entry, that works as expected. but there seems to be no way to change the setting once in place.

    Read the article

  • Print Preview Blank IE8

    - by Ben
    On a Windows XP, in IE8 print preview always appears completely blank except for header information. I can open the generated temp file in firefox and print it from there. I have tried browsing without addons to no success. I have tried re-creating the "%TEMP%\low" folder as described on the web, e.g. here: http://answers.microsoft.com/en-us/ie/forum/ie8-windows_xp/ie8-printing-does-not-work-preview-empty/920588e5-ccc4-4e24-83d6-606d5e3b1c70 ... all with no success.

    Read the article

  • javax.naming.NameNotFoundException: Name [comp/env] is not bound in this Context. Unable to find [comp] error with java scheduler

    - by Morgan Azhari
    What I'm trying to do is to update my database after a period of time. So I'm using java scheduler and connection pooling. I don't know why but my code only working once. It will print: init success success javax.naming.NameNotFoundException: Name [comp/env] is not bound in this Context. Unable to find [comp]. at org.apache.naming.NamingContext.lookup(NamingContext.java:820) at org.apache.naming.NamingContext.lookup(NamingContext.java:168) at org.apache.naming.SelectorContext.lookup(SelectorContext.java:158) at javax.naming.InitialContext.lookup(InitialContext.java:411) at test.Pool.main(Pool.java:25) ---> line 25 is Context envContext = (Context)initialContext.lookup("java:/comp/env"); I don't know why it only works once. I already test it if I didn't running it without java scheduler and it works fine. No error whatsoerver. Don't know why i get this error if I running it using scheduler. Hope someone can help me. My connection pooling code: public class Pool { public DataSource main() { try { InitialContext initialContext = new InitialContext(); Context envContext = (Context)initialContext.lookup("java:/comp/env"); DataSource datasource = new DataSource(); datasource = (DataSource)envContext.lookup("jdbc/test"); return datasource; } catch (Exception ex) { ex.printStackTrace(); } return null; } } my web.xml: <web-app version="3.0" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_3_0.xsd"> <listener> <listener-class> package.test.Pool</listener-class> </listener> <resource-ref> <description>DB Connection Pooling</description> <res-ref-name>jdbc/test</res-ref-name> <res-type>javax.sql.DataSource</res-type> <res-auth>Container</res-auth> </resource-ref> Context.xml: <?xml version="1.0" encoding="UTF-8"?> <Context path="/project" reloadable="true"> <Resource auth="Container" defaultReadOnly="false" driverClassName="com.mysql.jdbc.Driver" factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" initialSize="0" jdbcInterceptors="org.apache.tomcat.jdbc.pool.interceptor.ConnectionState;org.apache.tomcat.jdbc.pool.interceptor.StatementFinalizer" jmxEnabled="true" logAbandoned="true" maxActive="300" maxIdle="50" maxWait="10000" minEvictableIdleTimeMillis="300000" minIdle="30" name="jdbc/test" password="test" removeAbandoned="true" removeAbandonedTimeout="60" testOnBorrow="true" testOnReturn="false" testWhileIdle="true" timeBetweenEvictionRunsMillis="30000" type="javax.sql.DataSource" url="jdbc:mysql://localhost:3306/database?noAccessToProcedureBodies=true" username="root" validationInterval="30000" validationQuery="SELECT 1"/> </Context> my java scheduler public class Scheduler extends HttpServlet{ public void init() throws ServletException { System.out.println("init success"); try{ Scheduling_test test = new Scheduling_test(); ScheduledExecutorService executor = Executors.newScheduledThreadPool(100); ScheduledFuture future = executor.scheduleWithFixedDelay(test, 1, 60 ,TimeUnit.SECONDS); }catch(Exception e){ e.printStackTrace(); } } } Schedule_test public class Scheduling_test extends Thread implements Runnable{ public void run(){ Updating updating = new Updating(); updating.run(); } } updating public class Updating{ public void run(){ ResultSet rs = null; PreparedStatement p = null; StringBuilder sb = new StringBuilder(); Pool pool = new Pool(); Connection con = null; DataSource datasource = null; try{ datasource = pool.main(); con=datasource.getConnection(); sb.append("SELECT * FROM database"); p = con.prepareStatement(sb.toString()); rs = p.executeQuery(); rs.close(); con.close(); p.close(); datasource.close(); System.out.println("success"); }catch (Exception e){ e.printStackTrace(); } }

    Read the article

  • Is there a relation between MS SQL Server client licenses and performance

    - by ramdaz
    I have a customer who has an .Net application running on MS SQL Server 2008, supplied by our company as a part of Microsoft Small Business Server. He started off with around 5 users, and hence we had not sold any extra licenses. Today there are 40 users, and there's performance degradation. An MS Consultant said that to improve performance you need to buy extra licenses. Is there a relationship. I am anyway planning to force the customer to buy extra licenses on legal grounds. But will there be any appreciable performance difference too? Advice welcome

    Read the article

  • Excel - How to count matches in data?

    - by JunkUtopia
    I am looking for patterns in the user journey of converted customers. I have each customers details in a row and then each step of the journey in it's own cell in columns, with up to 12 steps for each customer. For example if I want to find the count of every customer who at any point in their journey has for example, downloaded a pdf and contacted us via email, what formula is best suited to this? I've tried countifs but couldn't get it to work over multiple columns. Thank you.

    Read the article

  • How do I establish the network sharing to my WinXP server network drive from my Mac notebook?

    - by mobibob
    I have been able to connect to my WinXP server's shared drives by using Finder's Command-K to browse the network. Unfortunately, when the server gets rebooted, the connection drops and sometimes I cannot get reconnected. I have specified different protocols (afp / cifs / smb) and different login names (connect as...) with limited success. Once I find the right combination, I am good for a few weeks. Once, it seems as though I had to unshared and shared the drive to get it to work. Unfortunately, it is very frustrating, so I try multiple things at one time, so when I finally get to the success point -- I honestly don't know what worked. I followed Mac help, surfed for instructions, issues, etc., but nothing appears to be consistent. I would love for this thread to be the ultimate answer for all time! Can anyone help me? If my description or question need more detail, please ask away!

    Read the article

  • How to handle recurring dates (dates only) in .NET?

    - by Wayne M
    I am trying to figure out a good way to handle recurring events in .NET, specifically for an ASP.NET MVC application. The idea is that a user can create an event and specify that the event can occur repeatedly after a specific interval (e.g. "every two weeks", "once a month" and so on). What would be the best way to tackle this? My brainstorming right now is to have two tables: Job and RecurringJob. Job is the "master" record and has the description of the job as well a key to what customer it's for, while RecurringJob links back to Job and has additional info on what the occurrence frequency is (e.g. 1 for "once a month") as well as the timespan (e.g. "Weekly", "Monthly"). The issue is how to determine and set the next occurrence of the job since this will have to be something that's done regularly. I've seen two trains of thought with this: This logic should either be stored in a database column and periodically updated, or calculated on the fly in the code. Any thoughts or suggestions on tackling this? Edit: this is for a subscription based web app I'm creating to let service businesses schedule their common recurring jobs easily and track their customers. So a typical use might be to create a "Cut lawn" job for Mr Smith that occurs every month The exact date isn't important - it's the ability for the customer to see that Mr Smith gets his lawn cut every month and followup with him about it. Let me rephrase the above to better convey my idea. A sample use case for the application might be as follows: User pulls up the customer record for John Smith and clicks the Add Job link. The user fills out the form to create a job with a name of "Cut lawn", a start date of 11/15/2009, and selects a checkbox indicating that this job continually occurs. The user is presented with a secondary screen asking for the job frequency. The user indicates (haven't decided how at this point - let's assume select lists) that the job occurs once a month. User clicks save. Now, when the user views the record for John Smith, they can see that he has a job, "Cut lawn", that occurs every month starting from 11/15/2009. On the main dashboard when it's one week prior to the assumed start date, the user sees the job displayed with an indicator such as "12/15/2009 - Cut lawn (John Smith)". A week before the due date someone from the company calls him up to schedule and he says he's going to be out of town until 1/1/2010, so he wants his appointment rescheduled for that date. Our user can change the date for the job to be 1/1/2010, and now the recurrence will start one month from that date (e.g. next time will be 2/1/2010). The idea behind this is that the app is targeting businesses like lawn care, plumbers, carpet cleaners and the like where the exact date isn't as important (because it can and will change as people are busy), the key thing is to give the business an indicator that Mr. Smith's monthly service is coming up, and someone should give him a call to determine when exactly it can be scheduled for. In effect give these businesses a way to track repeat business and know when it's time to followup with a customer.

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >