Search Results

Search found 22877 results on 916 pages for 'network storage'.

Page 96/916 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • pfsense 2.0.1 Firewall SMB Share not showing up under network

    - by atrueresistance
    I have a freenas NAS with a SMB share running at 192.168.2.2 of a 192.168.2.0/28 network. Gateway is 192.168.2.1. Originally this was running on a switch with my LAN, but now having upgraded to new hardware the Freenas has it's own port on the firewall. Before the switch the freenas would show up under Network on a windows 7 box and an OSX Lion box as freenas{wins} or CIFS shares on freenas{osx} so I know it doesn't have anything do to with the freenas. Here are my pfsense rules. ID Proto Source Port Destination Port Gateway Queue Schedule Description PASS TCP FREENAS net * LAN net 139 (NetBIOS-SSN) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 389 (LDAP) * none cifs lan passthrough PASS TCP FREENAS net * LAN net 445 (MS DS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 137 (NetBIOS-NS) * none cifs lan passthrough PASS UDP FREENAS net * LAN net 138 (NetBIOS-DGM) * none cifs lan passthrough BLOCK * FREENAS net * LAN net * * none BLOCK * FREENAS net * OPTZONE net * * none BLOCK * FREENAS net * 192.168.2.1 * * none PASS * FREENAS net * * * * none BLOCK * * * * * * none I can connect if I use \\192.168.2.2 and enter the correct login details. I would just like this to show up on the network. Nothing in the log seems to be blocked when I filter by 192.168.2.2. What port am I missing for SMB to show up under the network and not have to connect by IP? ps. Do I really need the LDAP rule?

    Read the article

  • Accessing network shares on Windows7 via SonicWall VPN client

    - by Jack Lloyd
    I'm running Windows7 x64 (fully patched) and the SonicWall 4.2.6.0305 client (64-bit, claims to support Windows7). I can login to the VPN and access network resources (eg SSH to a machine that lives behind the VPN). However I cannot seem to be able to access shared filesystems. Windows is refusing to do discovery on the VPN network. I suspect part of the problem is Windows persistently considers the VPN connection to be a 'public network'. Normally, you can open the network and sharing center and modify this setting, however it does not give me a choice for the VPN. So I did the expedient thing and turned on file sharing for public networks. I also disabled the Windows firewall for good measure. Still no luck. I can access the server directly by putting \\192.168.1.240 in the taskbar, which brings up the list of shares on the server. However, trying to open any of the shares simply tells me "Windows cannot access \\192.168.1.240\share You do not have permission to access ..."; it never asks for a domain password. I also tried Windows7 native VPN functionality - it couldn't successfully connect to the VPN at all. I suspect this is because SonicWall is using some obnoxious special/undocumented authentication system; I had similar problems trying to connect on Linux with the normal IPsec tools there. What magical invocation or control panel option am I missing that will let this work? Are there any reasonable debugging strategies? I'm feeling quite frustrated at Windows tendency to not give me much useful information that might let me understand what it is trying to do and what is going wrong.

    Read the article

  • Ubuntu 12.04 on VMware Player loses network configuration

    - by d4ryl3
    I've been having this issue for 2 weeks now with my VMware Player-hosted Ubuntu 12.04. I only use it for my LAMP stack. I've had no issues with it before until about 2 weeks ago when it almost always (once per day at least) loses its network configuration. On boot it shows: Waiting for network configuration... Waiting up to 60 more seconds for network configuration... Booting system without full network configuration... Then when I do ifconfig -a it doesn't show an IP Address and couldn't get online. The only resolutions I've found so far was either to reinstall VMware Tools or use the VMware Player installer and choose Repair. This is frustrating to me because even when the issue was resolved after doing either of the steps I mentioned, the IP Address gets changed. Then I'd have to update the Remote Configuration of my IDE (Netbeans) and my database manager. What could possible cause this? Please help. Thank you. Additional details: I'm using a laptop with Windows 7 and connected to the office WiFi, which is unrestricted as far as I know. Thanks again.

    Read the article

  • Damaged XenServer Storage LVM partition table

    - by Fiolek
    I have a homeserver running under XenServer control with 3x1TB discs inside, one for XenServer and two mirrored(using Intel's fakeRAID and dmraid) for VMs and a user data(but now I think RAID didn't work). I tried to pass PCI card to VM using PCI-passthroug and I read somewhere that I need to recompile kernel with pciback module but something went wrong(I made mistake in /boot/extlinux.conf and server couldn't run) and I had to use LiveCD of GPartEd(I already had it on USB key) to correct this. But when I re-run the server all VDIs were gone. I have completly no idea what could go wrong. I tried to repair RAID using dmraid -R in the hope that everything will return to noramal but now I think this done more bad than good(and corrupted rest of LVM table...). Is there any possibility to recover this SR or only data from one(~100GB) of VDI? I also wants to apologise for my English, I'm not from English-speaking country and I'm only 16 years old, so I hadn't "time" to learn it(school isn't good place to do this) in sufficient way.

    Read the article

  • update all the servers through one virtual servers using Storage are network virtual machine

    - by Mr.Calm
    Using UBUNTU and Virtal Box by Oracle, and Using this script to start nginx in Virtual Box, and placing it in Virtual box inside~/init.d #!/bin/bash ### BEGIN INIT INFO # Provides: Testinit # Required-Start: # Required-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Start daemon at boot time # Description: Enable service provided by daemon. ### END INIT INFO # RETVAL=0; start() { CurrentTime=$(date +%d/%m/%Y"-"%I:%M:%S) ./usr/local/nginx/sbin/nginx echo "Current Time:"$CurrentTime>>/home/server/Desktop/NginxLogs.txt echo "!Starting nginx!" >>/home/server/Desktop/NginxLogs.txt Like this i want to write auto script (setup.sh file) and place that script in all virtual boxes inside my system, for example 8 virtual boxes and in all Virtual boxes NGINX is installed. Now, The thing is i am facing problem when i want change something in setup.sh i have to go to each and every virtual box, or Communicate each Virtual machine through SSH from my main machine. i am thinking to write another script (ex: Update.sh),and inside that script we give one path of file which is saved and recently edited in main machine (ex: DummySetup.sh). as soon as i run that script all the setup.sh files which are saved in each virtual machines should update the change or replace contents with DummySetup.sh's contents. Hope this is possible thing. Help would be appreciated.Thanking you

    Read the article

  • Windows 7 PC cannot see some LAN PCs, but can access them via path

    - by zoot
    In an office LAN, with Windows 7 Professional workstations and a FreeNAS Samba server, 2 workstations have intermittent problems in browsing for the other workstations, as well as the FreeNAS server. However, so far, it appears that typing in the path to any of the workstations which aren't visible via the "browse" function, works. ie. the machine Workstation7 is not visible while browsing via Windows Explorer, but is accessible if I type \\Workstation7 in the path field. Occasionally the workstations exhibiting these symptoms show errors that their connection to the FreeNAS server has failed and only rebooting resolves the issue. All other workstations on the network use identical Windows 7 Professional installations and never have these problems. I've checked all machines and they're not using Home Groups. All are setup on the same WorkGroup as the FreeNAS server and the network type is set to Work Network. Temporarily disabling the firewall on the workstations with the issue made no difference, so I know this has nothing to do with the firewall settings. Any pointers would be appreciated. Thanks.

    Read the article

  • Windows Server 2008 network speed slow, Xen 3.4.3 HVM ISO

    - by Elliot.Bradshaw
    I've setup a VM running Windows Server 2008 on a host node running Xen 3.4.3-5 and the following kernel: 2.6.18-308.1.1.el5xen #1 SMP Wed Mar 7 05:38:01 EST 2012 i686 i686 i386 GNU/Linux The network speed on the VM is very slow--using the online speed tests I can only get it up to 8-9mbps. The line is 100mbps burstable and the host node has no problem achieving those speeds. If it setup a VM running CentOS, it too has no problems achieving those speeds. I've done some pretty exhaustive troubleshooting, but nothing has helped: New VM installations of Win2k8 do have the same network problem. Upgrading to most recent kernel-xen did not help (2.6.18-308.1.1.el5xen). Upgrading from xen 3.4.0 to xen 3.4.3-5 did not help. Disabling Windows firewall, etc did not help. Changing network card device config from auto negotiation to manually be 100mbps full duplex did not help. Changing the network receive buffer packet size did not help (tried all combos from 64k to 8k). At this point I'm pretty much out of ideas--any help would be appreciated!

    Read the article

  • Reverse proxy setup for distributed storage

    - by vise
    I have 4 file servers that I want to access under a single mount point from another server. This server has a web application that should serve content from the mounted point. I think I can achieve this with glusterfs. Considering that the file servers have fairly powerful hardware, I want to install a webserver on each of them and serve those files via a reverse proxy. Any thoughts on how I may be able to do so?

    Read the article

  • Encrypted off-site data storage

    - by Dan
    My business has a rather unique problem. We work in China and we want to implement a file server paradigm which does not store any files locally, but rather in a server overseas. Applications would be saved onto our local machines, but data would be loaded directly into memory from the cloud, e.g. I load a docx into word at the beginning of the day, saving periodically to the cloud as I work on it, and turn off my computer at night, with nothing saved locally. Considering recent events, we worry about being raided by the Chinese authorities, and although all our data is encrypted, it would not be hard for the authorities to force us to give up the keys. So the goal is not to have anything compromising physically in China. We have about 20 computers, and we need an authenticated, encrypted connection with this overseas file server. A system with Active-Directory-like permissions would be best, so that only management can read or write to certain files, or workers can only access files that relate to their projects, and to which all access can be cut off should the need arise. The file server itself would also need to be encrypted. And for convenience, it would be nice if this system was integrated with each computer's file explorer (like skydrive or dropbox does, but, again, without saving a copy locally), rather than through a browser. I can't find any solution online. Does anyone know of a service that does this? Otherwise I'll have to do it myself (which kinda sounds fun, but I don't really have the time), and I'm not sure where to start. Amazon maybe. But the protocols that offices would use on their intranet typically aren't encrypted; we need all traffic securely tunneled out of the country. Each computer already has a VPN to a server in California, but I'm unsure whether it would be efficient to pipe file transfers through it. Let me know if anyone has any ideas. And this is my first post; feel free say whether this question is inappropriate/needs to be posted elsewhere.

    Read the article

  • Copying SD Cards with "LaCie d2 Network"

    - by rjstelling
    The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

    Read the article

  • Improving abysmal 802.11n wireless network

    - by concept
    I am in desperate need of help to improve the abysmal performance of my 802.11n wireless network. At best I get 30Mbs (this is an internet download) from a technology that boasts 300Mbs, even worse is the LAN where to date best i have ever gotten is 1Mbs. It is literally quicker to copy the file to a USB and walk it to the other computer. Infrastructure is this AP 802.11n only broadcasting at both 2.4GHz and 5GHz Mac with 802.11a/b/g/n card is connected to the AP via 5GHz Linux with 802.11a/b/g/n card is connected to AP via 2.4GHz I have conducted the following tests (results at end of post) Internet based speed test wired and wireless LAN file copy wired and wireless I have read: http://nutsaboutnets.com/troubleshooting-wi-fi-problems/ http://www.smallnetbuilder.com/wireless/wireless-basics/30664-5-ways-to-fix-slow-80211n-- speed http colon //www.wi-fiplanet dot com/tutorials/7-tips-to-increase-wi-fi-performance.html Slow file transfer on network between two 802.11n laptops (connected directly together via access point) Wireless Network Performance Issues Slower than expected 802.11n wireless network speeds I have made the following optimizations AP broadcasts only 802.11n on both 2.4GHz and 5GHz frequencies 2.4GHz is on a channel with least interference (live in an apartment with lots of APs), this did make a 10Mb/sec improvement Our AP is the only one transmitting on the 5GHz freq. Security: WPA Personal WPA2 AES encryption Bandwidth: 20MHz / 40MHz (i assume this to be channel bonding) I have tried the following with 0 improvement Dropped the Fragment Threshold to 512 Dropped the Request To Send (RTS) Threshold to 512 and 1 Even thought of buying a frequency spectrum analyzer, until i saw the cost of them!!! Speed test results Linux Wired: DOWNLOAD 128.40Mb/s UPLOAD 10.62Mb/s www dot speedtest dot net/my-result/2948381853 Mac Wired: DOWNLOAD 118.02Mb/s UPLOAD 10.56Mb/s www dot speedtest dot net/my-result/2948384406 Linux Wireless: DOWNLOAD 23.99Mb/s UPLOAD 10.31Mb/s www.speedtest dot net/my-result/2948394990 Mac Wireless: DOWNLOAD 22.55Mb/s UPLOAD 10.36Mb/s www.speedtest dot net/my-result/2948396489 LAN NFS 53,345,087 bytes (51Mb) file Linux Mac NFS Wired: 65.6959 Mb/sec Linux Mac NFS Wireless: .9443 Mb/sec All help is appreciated, even testing methods will be accepted.

    Read the article

  • Allow access from outside network with dmz and iptables

    - by Ivan
    I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

    Read the article

  • Can't install SB750 RAID drivers in Windows 7 for two additional storage drives

    - by jf46
    Mobo: ASUS M4A79XTD, 790X/SB750 OS: Windows 7 x64 I currently have SATA 1-4 set to RAID and SATA 5-6 set to IDE. I have an SSD connected to SATA5 with Windows 7 installed on it, and that works fine. I also have configured a RAID 1 array of two 1TB HDDs, connected to SATA 1 and 2. These don't show up in Windows, and I'm having trouble getting the RAID driver installed. I even tried booting from the Windows DVD and repairing or installing Windows, but when I navigated to the relevant .sys files on my motherboard's driver CD, Windows setup told me that the files in question weren't relevant to my hardware. To be clear: I'm not trying to install Windows on a RAID. I have Windows installed on a separate disk on a separate SATA controller. I just want to get the SB750 RAID drivers installed so that the Windows disk utility can see my RAID 1 array, which is composed of two other disks. Do I need to wipe my SSD and reinstall Windows to get the RAID driver installed? That seems kind of ridiculous, and given what I described above, I'm not even sure it would work. Any help or guidance would be appreciated - thanks! Edit: Also, I've copied the driver files from the mobo CD into system32 and rebooted, no luck. Then I changed HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\iaStorV\Start from 3 to 0, and that didn't work either.

    Read the article

  • Resize partition of Windows 7 running on VirtualBox with dynamically allocated storage

    - by Nicolas Raoul
    I run Windows 7 inside VirtualBox. I resized the disk of Windows 7 from 25 GB to 50 GB: VBoxManage modifyhd Windows\ 7\ Pro.vdi --resize 50000 0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100% PROBLEM: I can' grow the partition, neither with Windows 7 itself nor with GParted: It looks like VirtualBox does not tell the client OS about the new size. What additional step is necessary?

    Read the article

  • Mapped networkdrive on logout

    - by Robuust
    I'm using a script to keep a mapped networkconnection alive, but ofcourse the mapped connection is gone when I logout. The point is now, that I'm running this on Windows Server 2008 R2, where I use remote desktop to login on the administrator account. However, it should remain logged in and not remove the mapped connection as this script takes care of not logging out on MS office 365 sharepoint. Is there a way to keep the mapped networklocation (L:) available after logout? So the script can run to remain the connection? # Create an IE Object and navigate to my SharePoint Site $ie = New-Object -ComObject InternetExplorer.Application $ie.navigate('https://xxx.sharepoint.com/') # Don't need the object anymore, so let's close it to free up some memory $ie.Quit() # Just in case there was a problem with the web client service # I am going to stop and start it, you could potentially remove this # part if you want. I like it just because it takes out a step of # troubleshooting if I'm having problems. Stop-Service WebClient Start-Service WebClient # We are going to set the $Drive variable here, this is just # going to tell the command what drive letter to map you can # change this to whatever you want (if you change it to a # drive that is already mapped it will overwrite it, so be careful. $Drive = "L:" # You can change the drive destiniation to whatever you want, # it has to be a document library or folder of course. $DrvDest = "https://xxx.sharepoint.com/files/" # Here is where we create the object to map the network drive and # then map the network drive $net = New-Object -ComObject WScript.Network; $net.mapnetworkdrive($Drive,$DrvDest) # That is the end of the script, now schedule this with task # scheduler and every so often and you should be set.

    Read the article

  • Moving Farm to co-location hosting - network settings requirements

    - by Saariko
    I am moving my farm (2 Dell's R620) to a co-location hosting service. I am trying to figure out the secure way to have my network settings The requirements are: VM1 is the working HOST, includes: esxi 5.1, vSphere, 4 clients (w2008r2 all) VM2 has esxi 5.1 installed, and a single machine with Veeam Backup and copy 6.5 - keeping a copy of VM1 clients on the VM2 internal storage (this solution is due to a very small budget - in case of failure on Host 1 - can redirect IP's) Only 2 VM clients require network address and access from the WWAN - ISP provides IP's range for them (with Gateway and DNS) I need connection to the iDrac's from my office (option to create a VPN-SSL tunnel) Connection to the vSphere appliances I want to be able to RDP to the VM clients The current configuration is that each host has the iDrac dedicated nic connected , and another (NIC #1) connected - with a static IP on 192.168.3.x The iDrac's have a static IP from the same network range (19.168.3.x) It will look something like this: My thoughts: On NIC#2 of both hosts I will connected a crossed cable I will give each VM clients that needs internet access a 2ndry VM network with the assigned IP from the ISP open only to web - can not access from the My Question: Should I give IP's (external) to the machines who DO NOT require WWAN Access? - I can't see a way to RDP to them directly if not. Should I use the crossed cable? or just plug NIC #2 to the switch? Will this setup even work? What do I need to verify? What Virtual nic's and/or switches should I create on the Hosts?

    Read the article

  • Slow File Copy observed copying 40GB files across network to iSCSI device

    - by Rick
    Here's a curious ones for the gurus: Setup: Source Machine: Windows Server 2003 R2 machine with local hard drive. VHD file of 40GB. 1 x 1Gbps network card, Cat6 cable, switch. Target Machine: Windows Server 2008 R2 machine with iSCSI connection to iSCSI target on separate machine (1TB, RAID5). 1 x 1Gbps network card, Cat6 cable, connected to same switch as for Source Machine. Second 1Gbps network card, Cat6 cable, connected via isolated switch to the iSCSI target. Switches are Netgear JGS524 model (web managed). If I copy from the Win2003R2 machine to Win2008R2 machine local drive I get 40GB in 45 minutes, 36 seconds. If I copy from the Win2008R2 machine to the iSCSI target (local drive to iSCSI target) I get 40GB in 37 minutes 56 seconds. If I copy from the Win2003R2 machine to the iSCSI target via the Win2008R2 machine I get 40GB in 3 hours, 50 minutes, 24 seconds. All copies were done via the following command issued on the Win2008R2 box: XCOPY <source> <target> /J XCOPY /J - Copies using unbuffered I/O. Recommended for very large files. So, what's the bit I'm missing here? Why does a back-to-back copy take in total 1 hour, 23 minutes, 32 seconds when a "straight through" copy take almost 3 times as long? Switches show no errors, network hovers around the 3% utilisation mark for the duration of the copy (whereas the "back-to-back" copies are around the 25% utilisation mark). What have I missed?

    Read the article

  • how to pre-create directories on linux for file storage

    - by Erik Sorensen
    Hi - looking for a way to pre-create directories on linux to be used to store a large number of files. We will be generating file ids using a GUID - I need to keep a copy of these files on a linux web server. I plan on using subdirectories to split up the files (it's ext3)... so for example, the filename 055c102b-62fb-4671-a3c7-68b9515ec53e.swf would live in /data/files/0/5/5/055c102b-62fb-4671-a3c7-68b9515ec53e.swf (taking the first 3 characters as directory names) My question is - how to create the /data/files/?/?/?/ directories ahead of time? Where ? could be a-z or 0-9

    Read the article

  • Storage (EBS) attached to my EC2 instance reporting files on two devices at once

    - by Philip Isaacs
    I have on EC2 instance with two attached EBS drives. One drive /dev/sda1 is mounted on / The second /dev/sda2 is mounted on /var2 So here's what's strange. Whenever I add any files to /var2 the it is also reporting that the / device is also filling up. As if they are the same device. It's so strange. So if I were to save a 10 mb file to a directory on /var2. Both / and /var2 use 10 mb of space up. Is this bizarre?

    Read the article

  • OpenVPN, install a TAP adapter

    - by GolezTrol
    When I try to connect to my work VPN using OpenVPN, the connection fails with the message: All TAP-Win32 adapters on this system are currently in use. Many sources suggest to look in Control Panel\Network and Internet\Network Connections an enable the TAP adapter, but when I look there, there is none. Now I've run addtap.bat which is provided with OpenVPN, but I still don't get to see any TAP adapter, and logging in in VPN still fails. The output of addtap.bat is C:\Windows\system32>"C:\Program Files (x86)\OpenVPN\bin\tapinstall.exe" install "C:\Program Files (x86)\OpenVPN\driver\OemWin2k.inf" tap0801 Device node created. Install is complete when drivers are updated... Updating drivers for tap0801 from C:\Program Files (x86)\OpenVPN\driver\OemWin2k .inf. Drivers updated successfully. I've Run As Administrator both the setup of OpenVPN and addtap.bat. I've run deltapall.bat to remove any (maybe hidden) adapters. It said it removed three of them, after which I ran addtap.bat again to try to create another one. I also run OpenVPN itself as administrator. What's wrong? Running Windows 7 Home Premium on a HP Pavilion dv7 4050ed. It has worked before, but I recently had to reinstall my laptop, for which I used the restore disks I created when I just got it. Everything else seems to work fine. == UPDATE == The TAP adapter is found in Device Manager, but apparently it is disabled because it is incompatible with Windows 7 64bit. I've deïnstalled OpenVPNGui, downloaded a version that should be 64bit compatible, and installed that. Still no cigar. Then I found a tip to install OpenVPN (version 9) after installing OpenVPNGui, because that installs OpenVPN version 8. Now I got a v9 TAP driver in Device Manager, but it still doesn't work and shows up in device manager with an exclamation mark, and not at all in my network devices.

    Read the article

  • Epson Artisan 800 on Ubuntu/Linux

    - by Tim Lytle
    Update for Ubuntu 10.04: Printing should work 'out-of-box', scanning still needs the newer sane backend. Looking for a known good way to setup an Epson Artisan 800 on Ubuntu specifically or any linux box in general. It is a printer/scanner with ethernet/wifi/usb. I'd like to use it as a network printer/scanner being able to do both from my Windows and Ubuntu machines; however, if it needs to be physically connected to a computer (preferably the Ubuntu machine) that is doable (again, then sharing print/scan functions to the network). Basically, I'm looking for someone who has used this printer/scanner (or similar) in a multi-platform environment to share how the set it up and how well it worked. Updated: A little more information, like most printers (I expect) the documentation for the printer basically says, "don't use plug-n-play, run our setup CD from your Windows/Mac system", to do anything (set it up for network use even). I guess that's to make it easy for anyone else to setup, but when you're looking to use it with an unsupported (by Epson's documentation) OS, you're just stuck on your own. What I was hoping for was someone who could say, "Forget the bundled software, do [this] to set it up on wifi manually, install [this] to connect to the scanner from [os], printing works with [this] driver - at least that's how I set it up." I'll will (and have so far) use the information here, and post my own setup when I'm done, if there's no one else out there with that experience.

    Read the article

  • Sharing storage on Linux and Solaris

    - by devlearn
    I'm looking for a solution in order to share a san mounted volume between several hosts running on Linux (RHEL) and/or Solaris (Sparc). Note that I basically need to share a set of directories containing large binary files that are accessed in random R/W mode. I have the following reqs : keep the data on the SAN suitable i/o performances as the software is pretty demanding on IOPS stick to a shared file system as I can't afford a cluster fs (lack of MDS/OSS infrastructure) compression could be really usefull For now I've found only the following candidates : GFS2 , supports Linux only, no compression VxFS , supports Linux and Solaris, compression supported So if you have some suggestions for this list, I'll really welcome them. Thanks in advance,

    Read the article

  • Copying compressed files from Server 2008 R2 network share to XP client via VPN fails

    - by Dejan Janjuševic
    At the first sight the question looks similar to this one. I have experienced an odd behavior while trying to copy a certain file from Windows Server 2008 R2 network share to Windows XP Professional client via VPN. The VPN was set up using RRAS on the server machine. I will try to provide as much informations as possible in order to make the issue more clear. When trying to copy the compressed file sized ~2.5 MB (via Explorer or CMD, doesn't matter), the process stalls after some 20%, producing an error message after few seconds: Cannot copy filename: The specified network name is no longer available. If i start the command ping -t 192.168.2.1 (where the IP address specified belongs to the server) side by side with the copy command, I can clearly see that the ping command times out for few seconds as the copy process stalls. When this happens all network activities are frozen. After a few seconds, the network recovers, ping continues to run normally, however the copy process stands still before it displays the above error message. Copying other files (I tried 4-5 files), of which some are larger and some are smaller, succeeds. Seems to me that I can copy all uncompressed files. As soon as I try to copy an archive, the process freezes. Even a 707 KB large archive can't be copied. I can only reproduce this behavior on 2 machines, both Windows XP Professional, one is w/ SP2 and the other w/ SP3. Other XP clients don't have this problem, neither do Windows 7 clients. If I connect to the server using Remote Desktop Connection without using VPN from either of these 2 machines (using the same user account), I can copy anything I want normally, even these "problematic" files. Does anyone have any clue about what could possibly be going on?

    Read the article

  • OpenVZ with brdiged interfaces and VLAN

    - by Deimosfr
    Hi, I've got a problem with OpenVZ with brdiged VLAN. Here is my configuration : +------+ +-------+ +-----------+ +---------+ br0 |VE101 | | | | OpenBSD |----->| Debian |------->| | | WAN |--->| Router | | OpenVZ | +------+ | | | Firewall |----->| br0 br1 | br1 +------+ +-------+ +-----------+ +---------+------->|VE102 | |br0 | | |VLAN br0.110 +------+ v +---------+ |VE103.110| +---------+ I can't make VLAN working on br0 (br0.110) and I would like to understand why. I don't have any switch so no problem with unmanageable switch. I've configured a VLAN interface on OpenBSD in /etc/hostname.vlan110 : inet 192.168.110.254 255.255.255.0 NONE vlan 110 vlandev sis1 And it seams working fine. I've also adapted my PF configuration to work with VLAN but I don't see any incoming traffic. On my Debian lenny, here is my interfaces configuration : # The loopback network interface auto lo iface lo inet loopback # br0 auto br0 iface br0 inet static address 192.168.100.1 netmask 255.255.255.0 gateway 192.168.100.254 network 192.168.100.0 broadcast 192.168.100.255 bridge_ports eth0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off # VLAN 110 auto br0.110 iface br0.110 inet static address 192.168.110.1 netmask 255.255.255.0 network 192.168.110.0 gateway 192.168.110.254 broadcast 192.168.110.255 pre-up vconfig add br0 110 post-down vconfig rem br0.110 It looks like ok, but when I start my VE, here is the message : ... Configure veth devices: veth103.0 Adding interface veth103.0 to bridge br0.110 on CT0 for VE103 can't add veth103.0 to bridge br0.110: Operation not supported VE start in progress... So I've got one error here. I've followed this documentation http://wiki.openvz.org/VLAN but it doesn't work. I've certainly missed something but I don't know why. Someone could help me please ? Thanks

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >