Search Results

Search found 3141 results on 126 pages for 'dav svn'.

Page 97/126 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Centralized sudo sudoers file?

  - by Stefan Thyberg

  I am the admin of several different servers and currently there is a different sudoers file on each one. This is getting slightly out of hand as quite often I need to give someone permissions to do something with sudo but it only gets done on one server. Is there an easy way of editing the sudoers file just on my central server and then distributing it by SFTP or something like that to the other servers in an easy way? Mostly wondering how other sysadmins solve this problem, since the sudoers file doesn't seem to be remotely accessible with NIS, for example. Operating system is SUSE Linux Enterprise Server 11 64-bit, but it shouldn't matter. EDIT: Every machine will, for now, have the same sudoers file. EDIT2: The accepted answer's comment was the closest to what I actually went ahead and did. I am right now using an SVN-supported puppet-installation and after a few headaches, it's working very well.

  Read the article

• Differences in memory consumption between two identical D7 sites?

  - by aendrew

  I'm running Drupal on a news site that has a lot of different View blocks on the front page (~5 total, all cached). In trying to reduce the memory footprint of the site, I've checked out source from SVN to a local development install to try and convert some of those blocks into more optimized code. Here's the weird thing. Devel module lists memory consumption at 50mb on the Production site (Running Nginx, PHP 5.2.17, XCache and Zend Optimizer.) but only 14mb on my development site (Running Apache2, PHP 5.2.13 and XCache). These are nearly-identical versions of the same site — frankly, the Production site should use even less memory as I've disabled some of the modules running on the Dev site. Any idea why this might be the case?

  Read the article

• Possible to get IIS on Windows Server 2008 R2 to "port-forward" port 80 for certain domains to other

  - by Lasse V. Karlsen

  I have IIS set up on my server, but also Apache x2 (other products which comes with their own servers, cannot be integrated into IIS.) Is it possible for me to "port-forward" certain domains on port 80 (that IIS handles) to those other ports? For instance: www.vkarlsen.no - IIS svn.vkarlsen.no - port 81 on same machine teamcity.vkarlsen.no - port 82 on same machine Or do I just need to set up those domains and redirect to the correct port? I'd like the domain name and url to be transparent to the user, but perhaps that won't work. Can anyone shed some light on this?

  Read the article

• Slow git clone and fetch

  - by EtienneT

  I setuped gitosis on a linux server following this tutorial: http://scie.nti.st/2007/11/14/hosting-git-repositories-the-easy-and-secure-way We are using git on our windows machines with TortoiseGit and msysgit. Pushing changes to the server is pretty fast, but when we want to clone or fetch changes from the remote server, it begins really fast (800k/s) and then drop pretty fast to around 3 to 30k/s and it can take forever to update. git-pull for small update is fast, but as soon as we have to download something of more than a few MB, it is slow. We are switching from SVN to git and this is holding us back from using git full time. Thanks!

  Read the article

• Are whole VM images backed up on Amazon EC2/S3?

  - by John

  I've been trying to get my head around Amazon Web Services as a VPS provider. My understanding is a EC2 instance running Windows is basically a Windows VM, very similar to renting a VPS from a more traditional hosting provider. I don't want to have complex backups, either to administer or to restore - if my restore involves installing SVN, MySQL, Jira, etc on a new box before I can even try to restore the backup then it's not great to me. What I really want is a service which backs up my entire VM... if the PC running the VPS dies then the VM image is installed on a new PC and off we go again. With Amazon being all about flexibility and elasticity, I wondered if they have this service? I can't figure it out from reading their docs.

  Read the article

• 403 Forbidden Error when trying to view localhost on Apache

  - by misbehavens

  I think my Apache must be all screwed up. I don't know if it ever worked. I just upgraded to Snow Leopard, and the first step on this tutorial is to start apache and check that it's working by opening http://localhost. It starts fine but when I go to localhost I get a 403 forbidden error. I don't know where to start figuring out how to fix it, so I wonder if a fresh install of Apache would do the trick. What do you think? Update: I found some error logs in /private/var/log/apache2/. Found this in one of the logs. Not sure what it means: [Tue Nov 10 17:53:08 2009] [notice] caught SIGTERM, shutting down [Tue Nov 10 21:49:17 2009] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] Warning: DocumentRoot [/usr/docs/dummy-host.example.com] does not exist Warning: DocumentRoot [/usr/docs/dummy-host2.example.com] does not exist httpd: Could not reliably determine the server's fully qualified domain name, using Andrews-Mac-Pro.local for ServerName mod_bonjour: Skipping user 'andrew' - cannot read index file '/Users/andrew/Sites/index.html'. [Tue Nov 10 21:49:19 2009] [notice] Digest: generating secret for digest authentication ... [Tue Nov 10 21:49:19 2009] [notice] Digest: done [Tue Nov 10 21:49:19 2009] [notice] Apache/2.2.11 (Unix) mod_ssl/2.2.11 OpenSSL/0.9.8k DAV/2 PHP/5.3.0 configured -- resuming normal operations Update: I also found something in the dummy-host.example.com-error_log file. I didn't set these dummy-host things by the way. Is this the default configuration? [Tue Nov 10 21:59:57 2009] [error] [client ::1] client denied by server configuration: /usr/docs Update: Woohoo! I found the file that had the virtual host definitions. It was in /etc/apache2/extra/httpd-vhosts.conf. It had those two dummy virtual host settings in there. I added a localhost virtual host. Not sure if this is necessary, but since it wasn't working before, decided to do it anyway. After removing the old virtual hosts, adding my new localhost virtual host, and restarting apache, it seems to work. So I guess whenever I want to add a virtual host, I only need to add them to this file? Or is there a hosts file somewhere, like there is on Linux? Update: Yes, there is an /etc/hosts file that need to be changed to. Add the virtual host name to that file.

  Read the article

• Windows 7 offline files - work temporarily offline even if network connection works

  - by Robert

  Sometimes I am connected via VPN to a network containing the server where files are stored which are cached by Windows offline files feature. Sometimes the connection works good and working this way is not a problem - on other times working is quite a pain because of high latency when working with the files in the Windows explorer. Is there an interactive way how a user (with admin permissions) can temporary suspend online usage of offline files? I already activated the "Transparent caching" group policy feature (Computer Configuration Policies Administrative Templates Networks Offline Files) with a network latency of 200msec but from my experience even if I get ping times to the file server of less than 40msec online usage is quite tenacious. Setting low latency times at this point causes the offline files often to toggle which makes problems with some applications working with several files and requires them to be consistent (like SVN client).

  Read the article

• What linux permissions are need for www?

  - by Xeoncross

  I know that 777 is full read/write/execute permission for owner/group/other. So this doesn't seem to be needed as it leaves random users full permissions. What permissions are need to be used on /var/www so that... Source control like git or svn Normal users in a group like "websites" or added to "www-data" Servers like apache or lighthttpd And PHP/Perl/Ruby can all read, create, and run files there? If I'm correct, Ruby and PHP scripts are not "executed" directly - but passed to an interpreter. So there is no need for execute permission on files in /var/www. Therefore, it seems like the correct permission would be chmod -R 1660 which would make all files shareable by these four entities all files non-executable by mistake block everyone else from the directory entirely set the permission mode to "sticky" for all future files Is this correct? Update: I just realized that files and directories might need different permissions - I was talking about files above so i'm not sure what the directory permissions would need to be.

  Read the article

• Showing Directory Root When Launching Rails App Using Apache2 and Passenger

  - by LightBe Corp

  I have done the following in an attempt to host a Rails 3.2.3 application using Apache 2.2.21 and Passenger 3.0.13: Installed gem Passenger rvmsudo passenger-install-apache2-module Added website info in /etc/apache2/extra/httpd-vhosts.conf Added line to /etc/hosts (not sure if this was needed or not; not mentioned in Passenger documentation Uncommented out the line in /etc/apache2/httpd.conf to Include /etc/apache2/extra/httpd-vhosts.conf Restarted Apache When I try to pull up my website the following displays: Index of / Name Last modified Size Description Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8r DAV/2 PHP/5.3.10 with Suhosin-Patch Phusion_Passenger/3.0.13 Server at lightbesandbox2.com Port 443 Here is /etc/hosts entry for the website: 127.0.0.1 www.lightbesandbox2.com Here is my /etc/apache2/extra/httpd-vhosts.conf entry for the website: NameVirtualHost *:80 <VirtualHost *:80> ServerName www.lightbesandbox2.com ServerAlias lightbesandbox2.com PassengerAppRoot /Users/server1/Sites/iktusnetlive_RoR/ DocumentRoot /Users/server1/Sites/iktusnetlive_RoR/public <Directory /Users/server1/Sites/iktusnetlive_RoR/public> AllowOverride all Options -MultiViews </Directory> </VirtualHost> When I do rvmsudo passenger-status I get the following output: ----------- General information ----------- max = 6 count = 1 active = 0 inactive = 1 Waiting on global queue: 0 ----------- Application groups ----------- /Users/server1/Sites/iktusnetlive_RoR/: App root: /Users/server1/Sites/iktusnetlive_RoR/ * PID: 8140 Sessions: 0 Processed: 2 Uptime: 20m 51s None of my assets are in the public folder in my Rails app. I have written an application using the template presented in Michael Hartl's Ruby on Rails Tutorial. The home page is in /app/views/static_pages/home.html.erb. I decided to copy an index.html file in the public folder to see if it would display. It displayed as I had hoped.. Is there a way to get Passenger to find my assets without me having to rewrite my application? Any help would be appreciated. Update 6/23/2012 10:00 am CDT GMT-6 I corrected the problems with my file and have successfully executed the rake assets:precompile command. I still get the index page as before. I have made no other changes. I did a passenger-status command and it is still loaded. Restarting Apache did nothing.

  Read the article

• Paint.NET equivalent for Linux?

  - by Macha

  On Windows, my favorite image editor is Paint.NET. However, on Linux, GIMP is as unfriendly as photoshop despite having less features. (i.e. It takes ages to load, their's far too much stuff). Most of my image editing is simple things where Photoshop or GIMP would be overkill. Paint.NET does not run on Wine or Mono. So is there any similar fast and simple but powerful image editor available for Linux? EDIT: There is a Mono version available, but I don't want to have to deal with installing svn versions of mono, and compiling the version myself.

  Read the article

• Debian Server Daemon: File sync

  - by Gehk

  Hello, I'm looking for a way to (auto) sync files on some pcs over the internet and save/backup them on my server. Just like Dropbox and other services like that. I found iFolder (by Novell), but it's not made for debian (i think it would still compile). I don't know if it's made for an webserver or just home server. Another way would be FTP, I don't know clients (i use ubuntu and windows on my pcs), which autoupload new/edited files. There is also svn/csv, but they are quite slow (afaik), and I don't know if there are suited for this. Someone got an idea? Thanks.

  Read the article

• BASH function not escaping control characters

  - by ehime

  Hey guys I have a function that I'm using to find stuff, but unfortunately anytime I pass it a control character ($intVal or testing : etc) it chokes. I was wondering what the fix was? I can understand that using $ or % or : etc in grep without escaping causes this issue, but since I'm passing it in by reference I'm not sure how to escape it... Anyway, here's the code. function ffind() { if [ $1 ] ; then find -type f | grep -ir '$1' * | grep -v '.svn' else echo "'$1' is not a valid resource" fi } Example(s): $ ffind $intVal '' is not a valid resource $ ffind "testing :" bash: [: testing: unary operator expected 'testing :' is not a valid resource

  Read the article

• How can you enable SMB2.0 on a router running DD-WRT?

  - by jeffreypriebe

  I think the steps are something like: Install DD-WRT on a router with an external hard-drive Install Optware to get Samba Upgrade to Samba 3.6 (the link shows Samba 3.5, but using the NSLU2 optware packages, you can get 3.6 with built-in SMB2.0) ...then a miracle occurs... Then you can use SMB2.0 to connect to your share What is step 4? I can't find it on forums, etc. Am using Microsoft Network monitor to check for SMB2.0 connection, I'm on Windows 7 and have tried network connections on wireless and gigabit wired to the router. No joy. I doubt it matters, but to get ahead of the questions: DD-WRT v24-sp2 (10/26/10) big (SVN revision 15508M NEWD-2 K2.6 Eko) on Cisco/Linksys E3000

  Read the article

• Setting up NFS server on Gentoo

  - by StackedCrooked

  I'm trying to set up an NFS server on a Gentoo VM. I've installed nfs-utils-1.2.2 and added the following line to the /etc/exports file: /root/svn 10.0.0.0/255.0.0.0(rw,sync,no_subtree_check) However, when I try to start the nfs service I get the following errors: gentoo-amd64-francis orig # /etc/init.d/nfs start FATAL: Could not load /lib/modules/2.6.24-9-pve/modules.dep: No such file or directory * Exporting NFS directories ... [ ok ] * Starting NFS mountd ... [ !! ] * Starting NFS daemon ... [ !! ] * Starting NFS smnotify ... [ ok ] It complains about not finding the /lib/modules/2.6.24-9-pve/modules.dep file, but the /lib/modules directory doesn't even exist on this machine. Can anyone help me getting it to work?

  Read the article

• What is it that automatically checks config changes (such as those in /etc) into git?

  - by Brandon

  I remember reading on the ubuntu forums some time ago about a program to automatically check configuration changes into version control for you. It was (of course) not Ubuntu-specific. I'm pretty sure it used git, though it may have been svn, or perhaps even able to work with multiple different VCSs. My Googling has turned up nothing, and I'd rather not roll my own script if someone has already done this well. Of course I could just manually check things in, but there are reasons I'd like it done automatically. (I'm actually planning to use this for my LastSession.plist file for Safari, so when the #@$%^*&! thing crashes, and I don't restore everything, and then Leopard crashes, the fact that it has such lousy session management won't mean I lose the dozens of windows with dozens of tabs I had open.)

  Read the article

• Cannot access Network Shares on Windows Server 2008 running VisualSVN Server

  - by mwillmott

  I have installed VisualSVN server on Windows Server 2008. The server is part of a domain but not the domain controller, it is just a data server and now an SVN server. VisualSVN uses port 80 and can only be access from inside the network (i do i by going to the dns name of the server). However, ever since i have installed this, other computers on the network can no longer access the shared folders on the server EXCEPT the domain controller which has no problems accessing the shares. I am stumped, i am guessing it is something to do with Apache running and not using host-headers (or whatever the Apache equivalent may be) but just being bound to the servers DNS name or IP. Any suggestions?

  Read the article

• install PECL JSON in PHP 5.04

  - by Radu Maris

  It's OK (compatible) to install PECL native JSON (from here) in PHP 5.0.4, on a production server running FC4 where unfortunately I cannot update PHP to at least 5.2 ? If there is a good chance to screw up PHP instalation on the server, I will not try to install it, and I will stick to Service JSON ( http ://svn.php.net/viewvc/pear/packages/Services_JSON/trunk/ ) In documentation ( http ://aurore.net/projects/php-json/ ) I have found: A simple ./configure; make; make install should do the trick. Make sure to add an extension=json.so line to your php.ini/php.d. (but I can't find anythink about compatible versions of PHP) Thank you. (Please don't tell me to update the OS and PHP, beacause it's not my decision :( )

  Read the article

• ffmpeg add two audio streams to video

  - by Tossin Hausen

  I tried this: ffmpeg -i /sdcard/video/transcode/video.avi -map 0:0,0 -i /sdcard/video/transcode/first.mp3 -map 1:0,1 -i /sdcard/video/transcode/second.mp3 -map 2:0,2 -acodec copy -vcodec py /sdcard/video/transcode/Output.avi to add two audio streams to one video file. But ffmpeg says the number of mappings should match the number of output streams. What is wrong here? I'm trying to work with an Android build of FFmepg "ffmpeg for android beta". "Does not work" means that this uncommunicative Android build of FFmpeg just stops without giving any error message. The -codec copy option does not work with this build. Now I tried the same set of files with the FFmpeg called command line tool that comes with Ubuntu 10. Something (can't say where it is from). The -codec copy option does not work with this FFmpeg too. Here the complete output: m30x:~/movie/Film$ ffmpeg -i input.avi -i first.mp3 -i second.mp3 -map 0 -map 1 -map 2 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x93cfd10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Input #2, mp3, from 'second.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #2.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Number of stream maps must match number of output streams Merging only one audio stream with the video stream works with Ubuntu and Android version of FFmpeg. Here the complete output: ffmpeg -i input.avi -i first.mp3 -map 0 -map 1 -acodec copy -vcodec copy output.avi FFmpeg version SVN-r0.5.9-4:0.5.9-0ubuntu0.10.04.1, Copyright (c) 2000-2009 Fabrice Bellard, et al. configuration: --extra-version=4:0.5.9-0ubuntu0.10.04.1 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-runtime-cpudetect --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --enable-shared --disable-static libavutil 49.15. 0 / 49.15. 0 libavcodec 52.20. 1 / 52.20. 1 libavformat 52.31. 0 / 52.31. 0 libavdevice 52. 1. 0 / 52. 1. 0 libavfilter 0. 4. 0 / 0. 4. 0 libswscale 0. 7. 1 / 0. 7. 1 libpostproc 51. 2. 0 / 51. 2. 0 built on Jun 12 2012 16:27:34, gcc: 4.4.3 [NULL @ 0x9bfad10]looks like this file was encoded with (divx4/(old)xvid/opendivx) -> forcing low_delay flag Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 25.00 (25/1) Input #0, avi, from 'input.avi': Duration: 01:30:33.00, start: 0.000000, bitrate: 901 kb/s Stream #0.0: Video: mpeg4, yuv420p, 576x432, 25 tbr, 25 tbn, 30k tbc Input #1, mp3, from 'first.mp3': Duration: 01:30:32.84, start: 0.000000, bitrate: 63 kb/s Stream #1.0: Audio: mp3, 22050 Hz, stereo, s16, 64 kb/s Output #0, avi, to 'output.avi': Stream #0.0: Video: mpeg4, yuv420p, 576x432, q=2-31, 90k tbn, 25 tbc Stream #0.1: Audio: libmp3lame, 22050 Hz, stereo, s16, 64 kb/s Stream mapping: Stream #0.0 -> #0.0 Stream #1.0 -> #0.1 Press [q] to stop encoding frame= 6157 fps=6156 q=-1.0 size= 31667kB time=246.28 bitrate=1053.3kbits/s Do you have an idea why it does not work with two audio streams? By the way, ffmpeg -i input_with_first_audio_stream.avi -i second.mp3 -acodec copy -vcodec copy output_two_audio_streams.avi -newaudio works with both versions of ffmpeg that I use, but the first audio stream is played too fast (x10 or more), while the second audio stream is played correct. Many thanks in advance and sorry for my unconventional question and outdated versions of ffmpeg. But I am a lamer and it is not so easy for me to compile from the source (especially for the Android version). I will try to compile an up to date version of ffmpeg with Ubuntu, but I don't have much free time.

  Read the article

• How to establish SIP connection, when SIP-proxy is required?

  - by LA_

  I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

  Read the article

• How can I install my installed linux on another hardware too?

  - by donamir

  Hi. It's my state: I installed some apps on a linux server(ubuntu). Apps stack are development tools: -some of Atlassian product -SVN, USVN -Maven, Artifactory -Tomcat & ... My problem: I want to create a bootable dvd to be able to restore same state(OS, configuration and apps) on another hardware(server). Some notes: I prefer ubuntu but my linux can be a different distributions if needed. w I prefer final result (bootable dvd) be simple and easy to use as installing a linux(ubuntu). I prefer a bootable DVD but if it's not possible, any other solution like partial backup/package even if needed to install first OS and then apply the package/backup/... can be good. Finally: Thanks in advance.

  Read the article

• Restoring permissions on Windows 2008

  - by Andrey

  I have played with folder permissions due to SVN not being able to write to a folder and now I got into a state where I go to any folder of C: drive in Windows Explorer and when I right-click it takes 30 seconds to show the context menu and it just hangs the window after that. It definitely has something to do with permissions as it was all working fine until I started tweaking permissions about an hour ago. My login belongs to two groups Users and Administrators. I changed ownership of C drive to Administrators group and I think it screwed everything, but I can't change it back because I don't even remember what it was :) Oh, and only Administrators group has access to drive C now. Any way to reset permissions to some previous state or some workable state?

  Read the article

• How can I view updatedb database content, and then exclude certain files/paths?

  - by rubo77

  The updatedb database on my debian server is quite slow. where is the database located and how can I view its content and find out if there are some paths with useless stuff, that I could add to the prunepaths? my /etc/updatedb.conf looks like this: ... # filesystems which are pruned from updatedb database PRUNEFS="NFS nfs nfs4 afs binfmt_misc proc smbfs autofs iso9660 ncpfs coda devpts ftpfs devfs mfs shfs sysfs cifs lustre_lite tmpfs usbfs udf" export PRUNEFS # paths which are pruned from updatedb database PRUNEPATHS="/tmp /usr/tmp /var/tmp /afs /amd /alex /var/spool /sfs /media /var/backups/rsnapshot /var/mod_pagespeed/" ... and how can I prune all paths that contain */.git/* and */.svn/* ?

  Read the article

• Get tortoisesvn to give me filenames with build number in the filename

  - by EricJLN

  I am on a Windows 7 box, and I have tortoisesvn on my machine. After getting a little familiar with svn and tortoisesvn on a code repository, I set up a local repository to manage revisions of some word and powerpoint documents. I want to figure out some scripted way to output a set of files with the build/revision number embedded in the filename. I will then email the files to some business people to review. For example, say I have a group of files in my working directory: PresentA.pptx PresentA-notes.docx PresentB.pptx and TortoiseSVN repo browser tells me that I am currently at revision 21 for PresentA.pptx and PresentA-notes.docx but at revision 25 for PresentB.pptx, I would like some way to get 3 files with the following names: PresentA-r21.pptx PresentA-notes-r21.docx PresentB-r25.pptx Alternatively, if revision 25 is the current value for the repository, having all the names appended with -r25 would work, too.

  Read the article

• Code deploy system [closed]

  - by Turnaev Evgeny

  Currently we deploy code to servers in a various ways: freebsd package freebsd ports part of config files and static just svn up'ed and a symlink is changed to new upped folder The distribution of freebsd packages to target servers is done through custom tool that uses ssh. I am looking for a code deploy system that will allow: deploy several packages (freebsd or linux) atomic (ether deploy all or none of them to server) can save a history of last stable version - so in case of bad deploy i can easily rollback to last working version all servers ease deployment of config and static files - and integrate those into atomic deploy/rollback system. should work with freebsd or linux (apt-get system)

  Read the article

• How to establish SIP connection, when SIP-proxy is required?

  - by LA_

  I have Asterisk/1.8.13.1 Asterisk GUI-version : SVN--r Yes, quite old one, but I can not update it since this is installed on my Synology NAS. NAS is connected to internet thru router Asus RT-N16. I should use the following data to connect to the server: Auth name – 7499952XXXX User name/User ID/Display Name – nickname Authorization user name - [email protected] Domain - sip.beeline.ru SIP proxy server - msk.sip.beeline.ru I've also found the following string: [email protected]:password:[email protected]@msk.sip.beeline.ru:5060/7499952XXXX I've tested the parameters on my PC thru X-Lite and it works well (so, assume there is no any problem with the router, no need to do anything with router's NAS settings). But since I am quite new to Asterisk, I can not understand where to input all these data. Asterisk GUI doesn't have fields for proxy: Can somebody please help me with step-by-step instruction? Thank you in advance!

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >