Search Results

Search found 3880 results on 156 pages for 'extended ascii'.

Page 97/156 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• FBA site owner encounter access deny in sharepoint 2007

  - by intangible02

  I created a sharepoint 2007 publishing site first using windows authentication, then extended it to another site using FBA. I created a FBA user and set it as site collection admin as well as top site owner. I also make application pool which the FBA site is running in to run with a user account which is within administrator group. But I encounter access deny error when browsing certain links using this site owner account. Is there other settings I need to configure? I found in the web.config, the impersonation is set to true. How does this affect the access rights?

  Read the article

• When is assembler faster than C?

  - by Adam Bellaire

  One of the stated reasons for knowing assembler is that, on occasion, it can be employed to write code that will be more performant than writing that code in a higher-level language, C in particular. However, I've also heard it stated many times that although that's not entirely false, the cases where assembler can actually be used to generate more performant code are both extremely rare and require expert knowledge of and experience with assembler. This question doesn't even get into the fact that assembler instructions will be machine-specific and non-portable, or any of the other aspects of assembler. There are plenty of good reasons for knowing assembler besides this one, of course, but this is meant to be a specific question soliciting examples and data, not an extended discourse on assembler versus higher-level languages. Can anyone provide some specific examples of cases where assembler will be faster than well-written C code using a modern compiler, and can you support that claim with profiling evidence? I am pretty confident these cases exist, but I really want to know exactly how esoteric these cases are, since it seems to be a point of some contention.

  Read the article

• iphone sqlite3 UPDATE with LIMIT and OFFSET clause

  - by Remover

  Does anyone know if the LIMIT and OFFSET clause work when using the UPDATE statement on iphone. on the sqlite3 website it says "if SQLite is built with the SQLITE_ENABLE_UPDATE_DELETE_LIMIT compile-time option then the syntax of the UPDATE statement is extended with optional ORDER BY and LIMIT clauses.." if not, can it be enabled? I'm using "UPDATE TESTDATA SET VAR = 1 LIMIT 1 OFFSET 1" but i get an error: near "LIMIT": syntax error I can get LIMIT and OFFSET clause to work on a SELECT statement. Are there any other ways around this?

  Read the article

• Looping through worksheets in an Excel (xls) file using classic ASP on a win 2008 server

  - by Roy

  Hi, I have just migrated an older ASP solution to a windows 2008 server and everything works out fine except for using ADOX.Catalog to list all the worksheets in an uploaded xls file. I use the following code: <% Set objExcelCon = Server.CreateObject("ADODB.Connection") With objExcelCon .Provider = "Microsoft.ACE.OLEDB.12.0" .ConnectionString = "Data Source=" & strFilePath & "\" & strFileName & ";Extended Properties=Excel 12.0;" .Open End With Set objAdo = Server.CreateObject("ADOX.Catalog") ' Set ADOX activeConnection objAdo.activeConnection = objExcelCon ' Loop through tables (worksheets) For i = 0 To objAdo.Tables.Count - 1 response.Write objAdo.Tables(i).Name Next Set objExcelCon = Nothing Set objAdo = Nothing % When I run this i get no error message or anything. Anyone got any idea whats causing this? Best regards, Roy

  Read the article

• Sharepoint - Navigation.QuickLaunch has missing items

  - by linqmonkey

  The following code generates an ASCII art tree view of a sharepoint site structure based on the items in the quick launch menu. But some are missing. From googling i've found suggestions that this may be because QuickLaunch only contains items that have been customised. Any idea how to fix this? I want to use the QuickLaunch items as many of the sites have subsites and pages that need to be displayed in a specific order. RecurseNavigation(SPWeb web) { depth++; foreach (SPNavigationNode node in web.Navigation.QuickLaunch) { Console.Write(new String('-', depth)); Console.WriteLine(node.Title + " ("+node.Url+")"); RecurseNavigation(root.OpenWeb(node.Url)); } depth--; }

  Read the article

• Android View.onDraw() always has a clean Canvas

  - by CaseyB

  I am trying to draw an animation. To do so I have extended View and overridden the onDraw() method. What I would expect is that each time onDraw() is called the canvas would be in teh state that I left it in and I could choose to clear it or just draw over parts of it (This is how it worked when I used a SurfaceView) but each time the canvas comes back already cleared. Is there a way that I can not have it cleared? Or maybe save the previous state into a Bitmap so I can just draw that Bitmap and then draw over top of it?

  Read the article

• Code Golf: Seven Segments

  - by LiraNuna

  The challenge The shortest code by character count to generate seven segment display representation of a given hex number. Input Input is made out of digits [0-9] and hex characters in both lower and upper case [a-fA-F] only. There is no need to handle special cases. Output Output will be the seven segment representation of the input, using those ASCII faces: _ _ _ _ _ _ _ _ _ _ _ _ | | | _| _| |_| |_ |_ | |_| |_| |_| |_ | _| |_ |_ |_| | |_ _| | _| |_| | |_| _| | | |_| |_ |_| |_ | Restrictions The use of the following is forbidden: eval, exec, system, figlet, toilet and external libraries. Test cases: Input: deadbeef Output: _ _ _ _ _ _||_ |_| _||_ |_ |_ |_ |_||_ | ||_||_||_ |_ | Input: 4F790D59 Output: _ _ _ _ _ _ |_||_ ||_|| | _||_ |_| || | _||_||_| _| _| Code count includes input/output (i.e full program).

  Read the article

• Reading UDP Packets

  - by Thomas Mathiesen

  I am having some trouble dissecting a UDP packet. I am receiving the packets and storing the data and sender-address in variables 'data' and 'addr' with: data,addr = UDPSock.recvfrom(buf) This parses the data as a string, that I am now unable to turn into bytes. I know the structure of the datagram packet which is a total of 28 bytes, and that the data I am trying to get out is in bytes 17:28. I have tried doing this: mybytes = data[16:19] print struct.unpack('>I', mybytes) --> struct.error: unpack str size does not match format And this: response = (0, 0, data[16], data[17], 6) bytes = array('B', response[:-1]) print struct.unpack('>I', bytes) --> TypeError: Type not compatible with array type And this: print "\nData byte 17:", str.encode(data[17]) --> UnicodeEncodeError: 'ascii' codec can't encode character u'\xff' in position 0: ordinal not in range(128) And I am not sure what to try next. I am completely new to sockets and byte-conversions in Python, so any advice would be helpful :) Thanks, Thomas

  Read the article

• Error in Jaclplus component

  - by Aruna

  Hi, I am working on Joomla 1.5 and our site is using the Bluehost server.Till March 9th, 2010 our site was working perfectly.And on March 10th,2010 , the following error was shown in the site as Warning: Unexpected character in input: '' (ASCII=28) state=1 in /home1/tcscoinc/public_html/tcsrnd/administrator/components/com_jaclplus/jac lplus.class.php on line 73 Parse error: syntax error, unexpected T_STRING in /home1/tcscoinc/public_html/tcsrnd/administrator/components/com_jaclplus/jac lplus.class.php on line 73 For time being, i have just renamed the file jaclplus.class.php to make the site to function. As we are using Jaclplus component and we have purchased the Jaclplus component from Byos Tech , i have checked in the membership details.And we found that our Membership has been expired on 03/10/2010 . I have asked them but they had replied that it may not be a problem on membership. Please anyone share what can be the reason for the error.I am not able to open that file(jaclplus.class.php) since its a binary file.

  Read the article

• What Determines the Default Setting of the x87 FPU Control Word?

  - by Rick Regan

  What determines the default setting of the x87 FPU control word -- specifically, the precision control field? Does the compiler set it based on the target processor? Is there a compiler option to change it? Using Microsoft Visual C++ 2008 Express Edition on an Intel Core Duo processor, the default setting for the precision control field is "01b", meaning double (53 bit) precision. I'm wondering -- why is the default not "11"b, or extended (64 bit) precision? (I know I can change it using _controlfp.)

  Read the article

• [.NET] Line break in ListView work in Vista/7 but not in XP

  - by karol

  hi, I've got problem. I'm using ListView to show some data and I need to make two lines in one row. I've found solution to make row higher by adding ImageList with specified height and then I add Environment.NewLine to my text. It works in Vista and 7 but in XP instead of new line there are shown squares. I've been trying to add "\n" "\r\n" and ASCII char 10 but ther were still squares! After few days I still don't know what's wrong and I need your help.

  Read the article

• ASP: Extend control (ASCX) and access base markup file from subclass code

  - by Pathoschild

  Hello, I'm building form validation controls for our C# ASP application. The bulk of the work is handled by a BaseValidator control (subclassing System.Web.UI.UserControl), which also has the markup for the validation output. This is then extended by subcontrols like PasswordValidator, that provides the Validate method and any extra fields needed by that validator control. (The end goal is to have controls like <uc1:PasswordValidator ControlId="txtPassword" /> which we can plop into any form with minimum duplication.) However, PasswordValidator.ascx.cs cannot access the form elements defined in BaseValidator.ascx; the only way I've found to do so is to duplicate the markup in each subcontrol's *.ascx file. How can I extend BaseValidator.ascx.cs and access BaseValidator.ascx's markup in the subclass?

  Read the article

• I'm getting this exception : Unresolved compilation problems

  - by Stephan

  I get this exception after i removed from my project the jars (pdfbox ,bouncycastle etc) and moved them to another folder but i included them in the build path ... at the first line eclipse shows this error( the constructor PDFParser(InputStream) refers to missing type InputStream) -altought FileInputStream is extended from InputStream- and i don't know why? FileInputStream in = new FileInputStream(path); PDFParser parser = new PDFParser(in); PDFTextStripper textStripper = new PDFTextStripper(); parser.parse(); String text = textStripper.getText(new PDDocument(parser.getDocument())); any ideas? ** Exception in thread "AWT-EventQueue-0" java.lang.Error: Unresolved compilation problems: The constructor PDFParser(InputStream) refers to the missing type InputStream The constructor PDFTextStripper() refers to the missing type IOException The method parse() from the type PDFParser refers to the missing type IOException The method getText(PDDocument) from the type PDFTextStripper refers to the missing type IOException The method getDocument() from the type PDFParser refers to the missing type IOException The method getDocument() from the type PDFParser refers to the missing type IOException The method close() from the type COSDocument refers to the missing type IOException **

  Read the article

• Is it possible to read to a Paradox 7.x .db file in a .Net app?

  - by Pedro

  I'm trying to read a Paradox 7.x .db file in a .Net 3.5 app and I'm not being successful on that. First of all, when I'm registering the odbc, as a user or system dsn, the Microsoft Paradox ODBC Driver only display versions up to 5.x, so it looks like that it does not support Paradox version 7.x. At connectionsstrings.com I've found the connection string that is supposed to work with Paradox 7.x: Provider=MSDASQL;Persist Security Info=False;Mode=Read; Extended Properties='DSN=Paradox;DBQ=C:\mydbfolder; DefaultDir=C:\mydbfolder;DriverId=538;FIL=Paradox 7.X;MaxBufferSize=2048; PageTimeout=600;';Initial Catalog=C:\mydbfolder But when I try to test the connection using a Data Adapter I get the following exception: "ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified" I have specified the ODBC as a user DSN and as a System DSN as well but kept receiving the same error. Any clues on what should I do? Thanks, Pedro

  Read the article

• How to compare two TXT files before send it to SQL

  - by adopilot

  I have to handle TXT dat files which coming from one embed device, My problem is in that device always sending all captured data but I want to take only difrences between two sending and do calculation on them. After calculation I send it to SQL using bulkinsert function. I want to extract data which is different according to first file I got from device. Lats say that device first time device send data like this in some.dat (ASCII) file 0000199991 0000199321 0000132913 0000232318 0000312898 On second calls to get data from device it is going to return all again (previous and next captured records) something like this 0000199991 0000199321 0000132913 0000232318 0000312898 9992129990 8782999022 2323423456 But this time I do want only to calculate and pass trough data added after first insert. I am trying to make Win Forms app using C# and Visual Studio 2008

  Read the article

• ruby on rails state machines

  - by srboisvert

  I'm looking to implement a state machine to manage a user moving through a series of steps over an extended period of time (weeks) with emails and then they interact with the app. I've looked at a couple of AASM plugins and forks (it seems like this plugin space has become a bit chaotic) and am curious what people would recommend. I saw the automatic AASM by hashrocket, that transitions states using cron, and from the title it looks like it might fit the bill but there doesn't appear to be any documentation anywhere and it looks more like a skeleton app than a plugin.

  Read the article

• Python utf-8 decoding issue with hashlib.digest() method

  - by Sorw

  Hello StackOverflow community, Using Google App Engine, I wrote a keyToSha256() method within a model class (extending db.Model) : class Car(db.Model): def keyToSha256(self): keyhash = hashlib.sha256(str(self.key())).digest() return keyhash When displaying the output (ultimately within a Django template), I get garbled text, for example : ?????_??!`?I?!?;?QeqN??Al?'2 I was expecting something more in line with this : 9f86d081884c7d659a2feaa0c55ad015a3bf4f1b2b0b822cd15d6c15b0f00a08 Am I missing something important ? Despite reading several guides on ASCII, Unicode, utf-8 and the like, I think I'm still far from mastering the secrets of string encoding/decoding. After browsing StackOverflow and searching for insights via Google, I figured out I should ask the question here. Any idea ? Thanks !

  Read the article

• Endianness inside CPU registers

  - by Abhishek Tamhane

  I need help understanding endianness inside CPU registers of x86 processors. I wrote this small assembly program: section .data section .bss section .text global _start _start: nop mov eax, 0x78FF5ABC mov ebx,'WXYZ' nop ; GDB breakpoint here. mov eax, 1 mov ebx, 0 int 0x80 I ran this program in GDB with a breakpoint on line number 10 (commented in the source above). At this breakpoint, info registers shows the value of eax=0x78ff5abc and ebx=0x5a595857. Since the ASCII codes for W, X, Y, Z are 57, 58, 59, 5A respectively; and intel is little endian, 0x5a595857 seems like the correct byte order (least significant byte first). Why isn't then the output for eax register 0xbc5aff78 (least significant byte of the number 0x78ff5abc first) instead of 0x78ff5abc?

  Read the article

• ASP.NET Binding integer to CheckBox's Checked field

  - by Sung Meister

  I have a following ListView item template, in which I am trying to bind integer value to Checked property of CheckBox. IsUploaded value contains only 0 and 1... <asp:ListView ID="trustListView" runat="server"> <ItemTemplate> <asp:CheckBox ID="isUploadedCheckBox" runat="server" Checked='<%# Bind("IsUploaded") %>' /> </ItemTemplate> </asp:ListView> But ASP.NET complains that Exception Details: System.InvalidCastException: Sepcified cast is not valid Even though following code using DataBinder.Eval() works, I need to have a 2-way binding, thus need to use Bind(). <asp:CheckBox ID="isUploadedCheckBox2" runat="server" Checked='<%# Convert.ToBoolean( DataBinder.Eval(Container.DataItem, "IsUploaded"))) %>' /> How can I convert 0's and 1's to boolean using Bind()? [ANSWER] I have extended auto-generated type through partial class by adding a new property mentioned in the answer by Justin

  Read the article

• The reasons to upgrade from Delphi 2009

  - by Serg

  I have made the question "community wiki" - it is subjective. I have upgraded to Delphi 2009 because of unicode support. I have found the anonymous methods a very interesting and useful language feature, I can't say the same about generics. The generics seemed important for me before the upgrade to Delphi 2009, but I have never used them and probably will never use. As for Delphi 2010, I don't need the attributes and I don't like the whole idea of extended RTTI - that is why Delphi 2009 is better for me. Sometimes I hit one or other annoying bug in Delphi 2009 IDE, but they are not critical and I can live with them. I have no plans to develop software for Mac or Linux. Sure sometime I will need 64-bit support, so I think about upgrading to Delphi 2012. Are where any more reasons that can force me to upgrade from Delphi 2009?

  Read the article

• Strange Recurrent Excessive I/O Wait

  - by Chris

  I know quite well that I/O wait has been discussed multiple times on this site, but all the other topics seem to cover constant I/O latency, while the I/O problem we need to solve on our server occurs at irregular (short) intervals, but is ever-present with massive spikes of up to 20k ms a-wait and service times of 2 seconds. The disk affected is /dev/sdb (Seagate Barracuda, for details see below). A typical iostat -x output would at times look like this, which is an extreme sample but by no means rare: iostat (Oct 6, 2013) tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16.00 0.00 156.00 9.75 21.89 288.12 36.00 57.60 5.50 0.00 44.00 8.00 48.79 2194.18 181.82 100.00 2.00 0.00 16.00 8.00 46.49 3397.00 500.00 100.00 4.50 0.00 40.00 8.89 43.73 5581.78 222.22 100.00 14.50 0.00 148.00 10.21 13.76 5909.24 68.97 100.00 1.50 0.00 12.00 8.00 8.57 7150.67 666.67 100.00 0.50 0.00 4.00 8.00 6.31 10168.00 2000.00 100.00 2.00 0.00 16.00 8.00 5.27 11001.00 500.00 100.00 0.50 0.00 4.00 8.00 2.96 17080.00 2000.00 100.00 34.00 0.00 1324.00 9.88 1.32 137.84 4.45 59.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.00 44.00 204.00 11.27 0.01 0.27 0.27 0.60 Let me provide you with some more information regarding the hardware. It's a Dell 1950 III box with Debian as OS where uname -a reports the following: Linux xx 2.6.32-5-amd64 #1 SMP Fri Feb 15 15:39:52 UTC 2013 x86_64 GNU/Linux The machine is a dedicated server that hosts an online game without any databases or I/O heavy applications running. The core application consumes about 0.8 of the 8 GBytes RAM, and the average CPU load is relatively low. The game itself, however, reacts rather sensitive towards I/O latency and thus our players experience massive ingame lag, which we would like to address as soon as possible. iostat: avg-cpu: %user %nice %system %iowait %steal %idle 1.77 0.01 1.05 1.59 0.00 95.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 13.16 25.42 135.12 504701011 2682640656 sda 1.52 0.74 20.63 14644533 409684488 Uptime is: 19:26:26 up 229 days, 17:26, 4 users, load average: 0.36, 0.37, 0.32 Harddisk controller: 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) Harddisks: Array 1, RAID-1, 2x Seagate Cheetah 15K.5 73 GB SAS Array 2, RAID-1, 2x Seagate ST3500620SS Barracuda ES.2 500GB 16MB 7200RPM SAS Partition information from df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdb1 480191156 30715200 425083668 7% /home /dev/sda2 7692908 437436 6864692 6% / /dev/sda5 15377820 1398916 13197748 10% /usr /dev/sda6 39159724 19158340 18012140 52% /var Some more data samples generated with iostat -dx sdb 1 (Oct 11, 2013) Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sdb 0.00 15.00 0.00 70.00 0.00 656.00 9.37 4.50 1.83 4.80 33.60 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 12.00 836.00 500.00 100.00 sdb 0.00 0.00 0.00 3.00 0.00 32.00 10.67 9.96 1990.67 333.33 100.00 sdb 0.00 0.00 0.00 4.00 0.00 40.00 10.00 6.96 3075.00 250.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 2.62 4648.00 500.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 1.00 0.00 16.00 16.00 1.69 7024.00 1000.00 100.00 sdb 0.00 74.00 0.00 124.00 0.00 1584.00 12.77 1.09 67.94 6.94 86.00 Characteristic charts generated with rrdtool can be found here: iostat plot 1, 24 min interval: http://imageshack.us/photo/my-images/600/yqm3.png/ iostat plot 2, 120 min interval: http://imageshack.us/photo/my-images/407/griw.png/ As we have a rather large cache of 5.5 GBytes, we thought it might be a good idea to test if the I/O wait spikes would perhaps be caused by cache miss events. Therefore, we did a sync and then this to flush the cache and buffers: echo 3 > /proc/sys/vm/drop_caches and directly afterwards the I/O wait and service times virtually went through the roof, and everything on the machine felt like slow motion. During the next few hours the latency recovered and everything was as before - small to medium lags in short, unpredictable intervals. Now my question is: does anybody have any idea what might cause this annoying behaviour? Is it the first indication of the disk array or the raid controller dying, or something that can be easily mended by rebooting? (At the moment we're very reluctant to do this, however, because we're afraid that the disks might not come back up again.) Any help is greatly appreciated. Thanks in advance, Chris. Edited to add: we do see one or two processes go to 'D' state in top, one of which seems to be kjournald rather frequently. If I'm not mistaken, however, this does not indicate the processes causing the latency, but rather those affected by it - correct me if I'm wrong. Does the information about uninterruptibly sleeping processes help us in any way to address the problem? @Andy Shinn requested smartctl data, here it is: smartctl -a -d megaraid,2 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:13 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 20 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1236631092 Blocks received from initiator = 1097862364 Blocks read from cache and sent to initiator = 1383620256 Number of read and write commands whose size <= segment size = 531295338 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36556.93 number of minutes until next internal SMART test = 32 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 509271032 47 0 509271079 509271079 20981.423 0 write: 0 0 0 0 0 5022.039 0 verify: 1870931090 196 0 1870931286 1870931286 100558.708 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36538 - [- - -] # 2 Background short Completed 16 36514 - [- - -] # 3 Background short Completed 16 36490 - [- - -] # 4 Background short Completed 16 36466 - [- - -] # 5 Background short Completed 16 36442 - [- - -] # 6 Background long Completed 16 36420 - [- - -] # 7 Background short Completed 16 36394 - [- - -] # 8 Background short Completed 16 36370 - [- - -] # 9 Background long Completed 16 36364 - [- - -] #10 Background short Completed 16 36361 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes] smartctl -a -d megaraid,3 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:26 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 19 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 288745640 Blocks received from initiator = 1097848399 Blocks read from cache and sent to initiator = 1304149705 Number of read and write commands whose size <= segment size = 527414694 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36596.83 number of minutes until next internal SMART test = 28 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 610862490 44 0 610862534 610862534 20470.133 0 write: 0 0 0 0 0 5022.480 0 verify: 2861227413 203 0 2861227616 2861227616 100872.443 0 Non-medium error count: 1 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36580 - [- - -] # 2 Background short Completed 16 36556 - [- - -] # 3 Background short Completed 16 36532 - [- - -] # 4 Background short Completed 16 36508 - [- - -] # 5 Background short Completed 16 36484 - [- - -] # 6 Background long Completed 16 36462 - [- - -] # 7 Background short Completed 16 36436 - [- - -] # 8 Background short Completed 16 36412 - [- - -] # 9 Background long Completed 16 36404 - [- - -] #10 Background short Completed 16 36401 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes]

  Read the article

• Pipe data from InputStream to OutputStream in Java

  - by Wangnick

  Dear all, I'd like to send a file contained in a ZIP archive unzipped to an external program for further decoding and to read the result back into Java. ZipInputStream zis = new ZipInputStream(new FileInputStream(ZIPPATH)); Process decoder = new ProcessBuilder(DECODER).start(); ??? BufferedReader br = new BufferedReader(new InputStreamReader( decoder.getInputStream(),"us-ascii")); for (String line = br.readLine(); line!=null; line = br.readLine()) { ... } What do I need to put into ??? to pipe the zis content to the decoder.getOutputStream()? I guess a dedicated thread is needed, as the decoder process might block when its output is not consumed.

  Read the article

• Experience/Articles about "decision tree" documentation?

  - by Philipp Keller

  I'm running an "defect fixing" group (developers do 2 weeks operations, then rotate). I want to build up a documentation "how to deal with problem x" - basically a decision tree: Is the problem in part x of the web site? Yes: Is the problem occurring in all browsers? Yes: ... No: ... No: ... The documentation should be written and extended by the people using it. Do you know of any book/article describing how that is best done, or is there a software (Mac OS X) that helps doing that?

  Read the article

• RoR Devise: Sign in with username OR email

  - by Patrick Oscity

  Whats the best way to enable users to log in with their email address OR their username? I am using warden + devise for authentication. I think it probably won't be too hard to do it but i guess i need some advice here on where to put all the stuff that is needed. Perhaps devise devise already provides this feature? like in the config/initializers/devise.rb you would write: config.authentication_keys = [ :email, :username ] To require both username AND email for signing in. But i really want to have only one field for both username and email and require only one of them. I'll just visualize that with some ASCII art, it should look something like this in the view: Username or Email: [____________________] Password: [____________________] [Sign In]

  Read the article

• Code Golf: Beehive

  - by LiraNuna

  The challenge The shortest code by character count that will generate a beehive from user input. A beehive is defined a a grid of hexagons in a size inputted by the user as two positive numbers greater than zero (no need to validate input). The first number (W) represents the width of the beehive - or - how many hexagons are on each row. The second number (H) represents the height of the beehive - or - how many hexagons are on each column. A Single hexagon is made from three ASCII characters: _, / and \, and three lines: __ / \ \__/ Hexagons complete each other: the first column of the beehive will be 'low', and the second will be high - alternating and repeating in the same pattern forming W hexagons. This will be repeated H times to form a total of WxH hexagons. Test cases: Input: 1 1 Output: __ / \ \__/ Input: 4 2 Output: __ __ __/ \__/ \ / \__/ \__/ \__/ \__/ \ / \__/ \__/ \__/ \__/ Input: 2 5 Output: __ __/ \ / \__/ \__/ \ / \__/ \__/ \ / \__/ \__/ \ / \__/ \__/ \ / \__/ \__/ Input: 11 3 Output: __ __ __ __ __ __/ \__/ \__/ \__/ \__/ \__ / \__/ \__/ \__/ \__/ \__/ \ \__/ \__/ \__/ \__/ \__/ \__/ / \__/ \__/ \__/ \__/ \__/ \ \__/ \__/ \__/ \__/ \__/ \__/ / \__/ \__/ \__/ \__/ \__/ \ \__/ \__/ \__/ \__/ \__/ \__/ Code count includes input/output (i.e full program).

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >