Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 98/356 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

  • What Sort of Server Setup Am I Likely to Need? - School A/V streaming

    - by DeathMagus
    My prior experience with servers has generally been limited to home file-sharing servers, low-traffic web-servers, and the like. This leaves me with the technical knowledge of how to set up a system, but little experience in terms of scaling said system. My current project, however, has me as the technical lead in setting up a school for online audio and video streaming. The difficulty I'm running into is that I don't quite have the experience to guess what they'll need, and they don't have the experience to tell me - so I've tried to ask as many pertinent questions about what they want to do with their server, and here's what I found out: About 1000 simultaneous users, and hoping to expand (possibly significantly) Both video and audio streaming, at obviously the highest quality possible Support for both live and playlist-based streaming. Probably only one channel, but as it's an educational opportunity, I imagine letting them have a few more wouldn't hurt. No word on whether they're locked into Windows or whether Linux is acceptable. Approximate budget - $7000. It may actually be about $2k less than this, because of a mishap with another technology firm (they ordered a $7000 DV tape deck for some reason, and now the company wants them to pay a 30% restocking fee). The tentative decisions I've already made: I'm planning on using Icecast 2 for my streaming server, fed by VLC Shoutcast encoding. Since the school already has a DMZ set up, I plan on placing the Icecast server in there, and feeding it through their intranet from a simple workstation computer in their studios. This system isn't in any way mission critical - it's an education tool (they're a media magnet school), so I figure redundancy is not worthwhile to them from a cost:benefit perspective. What I don't know is this: How powerful of a server will I need? What is likely to be my major throttle - bandwidth? How can I mitigate that? Will I need anything special for the encoding workstation other than professional video and audio capture cards and a copy of VLC? Are there any other considerations that I'm simply missing? Thanks a lot for any help - if there's more information you need, let me know and I'll tell you all I can.

    Read the article

  • PC powers up but there is no display

    - by Matthew
    I built a computer with standard components I bought from Newegg about three years ago. It ran great for 2 years and has sat powered down for the last year. I tried to power it up today and the display was blank. It powers up, lights come on, drives start spinning but there is nothing on the display. I verified that the monitor and video adapter work. I also tried the video adapter in a different slot on the mother board with no luck. What's the next thing I should try? Is the mother board shot? Thanks.

    Read the article

  • Upgrading memory in a laptop

    - by ulidtko
    I'm a bit confused about all the memory types and various bus frequencies of modern consumer PCs. Requesting expert help on the subject. So far I'm confident that: I have an Asus X51L laptop with an unknown set of configuration options. The CPU in there supports PAE, so I still have a chance to extend the memory beyond 3GiB; and the upper limit of the system is 8GiB. (?) The laptop has two SODIMM slots, one of which is occupied by a 2GiB bank, and the other one is empty. dmidecode and lshw tools consistently state 533 Mhz frequency of the bank. The last one confuses me the most. I failed to find out characteristics of the northbridge in this laptop, and still can't figure out what DDR2 to seek for. Is it DDR2-1066? Or, rather, PC2-8500/PC2-8600? Wouldn't a DDR2-800 bank harm the system's performance? Which kind of modules should I look up in stores? Update: I have bought a 2 GiB DDR2-800 SODIMM, and it seams that the system can't handle 4 GiB of memory. When installed by itself in either slot, both new and old bank (which btw happens to be marked GDDR2-677) work just perfectly; i.e. any configuration resulting in 2 GiB works. When both banks are installed though (totalling in 4 GiB), the memcheck86 tool produces horrible artifacts and crashes, and system reboots; an Ubuntu system can be started and even logged into a Unity session, but the system reboots too in this case from even a minor RAM load. So it's pretty obvious to me now that this laptop doesn't support 4 GiB of RAM or more.

    Read the article

  • How to build a cheap and fanless server

    - by dag729
    Any advice about how to build a cheap and fanless server? It's main uses would be web and file servering, but it could be a day when I'd like to add some streaming and mailing capabilities as well. OS of choice: GNU/Linux Thanks in advance

    Read the article

  • Evaluate a vendor laptop before deployment to user?

    - by NetWarrior
    I get numerous requests from executives and users for new smaller laptops for travel purposes. Most of my evaluation is based upon whether or not it can run certain applications. Mainly lotus notes, office, and video. Most of the laptops include windows 7 OS, and are fully loaded with ram, a high-end processor and a integrated graphics card. My boss whats me to document the usefulness of the laptop and performance. I'm just a little confused on how to setup a document that can be used by members of the IT department for future evaluations.

    Read the article

  • What GTX 285 should I choose?

    - by Thomaschaaf
    I'm trying to buy a graphics card and the GTX 285 models seem to be in the right pricerange. A friend of mine suggested me the ZOTAC GeForce GTX 285 over the XFX Black Editon. Which card maker and edition would you choose? Is the AMP! a good decision for the ZOTAC?

    Read the article

  • Low-profile, PCI Express, x1 video card with VGA-out?

    - by Dandy
    I just bought an Acer Aspire EasyStore H340 system (http://us.acer.com/acer/productv.do?LanguageISOCtxParam=en&kcond61e.c2att101=54825&sp=page16e&ctx2.c2att1=25&link=ln438e&CountryISOCtxParam=US&ctx1g.c2att92=450&ctx1.att21k=1&CRC=936243954) It comes with Windows Home Server, which I don't particularly care for (too dumbed down for my liking)--I bought the box mainly for the form factor, and intend to install Server 2008 on it and have it run as a small domain controller. The geniuses at Acer however went out of their way to ensure you can only run Home Server--you can only connect to it via the Home Server Connector software, as it has no video-out whatsoever (so essentially, there's no way to even get into the BIOS). It only has a low-profile, PCI Express x1 slot. It turns out to be way harder than I thought to locate a video card that both has an x1 connector, and is low-profile (I'd really rather not snip the bracket at the back just so it'll fit the case). I know they're out there, and I've seen one with Display Port outputs, but I don't have a monitor with this connection. So to reiterate, it needs to be: - x1 connector - low profile - VGA out (though DVI would be okay; I have some spare adapters) Can anyone recommend anything at all?

    Read the article

  • Where can I find this HP modular keyboard or similar?

    - by Chaos Whistler
    I'm looking for an HP USB 104-Key Modular Keyboard with Detachable Number Pad (model number is DT530A, I believe), shown at this online store, where it's quite cheap but is sadly sold out. I've searched for hours on Google, and I've found several - the problem is they're Spanish or Greek keyboards but I need one in English (US keys preferred)! I would also be happy with a keyboard which is not exactly this but is similar, either with a detachable keypad or with no keypad at all, as long as the keyboard key layout and positioning is the same as on a standard keyboard. Can you help me find such a keyboard?

    Read the article

  • What is the largest flatscreen monitor available for PC use?

    - by Avery Payne
    I'll qualify this specifically (by order of preference): must have the highest diagonal measurement, widescreen or "normal" aspect ratio doesn't matter here, just the diagonal. must have the highest resolution available, which means 72 inches of 1280x1024 won't cut it. must not have a TV tuner built into it, I'm not looking for a TV set, this is a monitor! must be available at a retail outlet that caters to the general public, i.e. Best Buy, Sears, Costco (all of these examples are in the U.S., although you can suggest something from whatever chain is in your area/nation/geography). Non-retail or non-physical venues like eBay, or businesses that only cater to other businesses, do not qualify under this requirement. I should be able to walk into this place and purchase it, not just whip up an order online. If you are unsure about this requirement, just ask yourself: can I physically see it before I open my wallet and purchase it?

    Read the article

  • Boot drive not found issue after cloning using Apricorn EZgig

    - by TomWilsonFL
    A couple days ago I cloned a drive for someone using the EZgig software. Usually this goes without a hitch, but this particular drive I was cloning is quite old. When I restarted with the new drive I received the typical bootable disk not found message, so I turned it off, messed with the BIOS, restarted and it came up fine. That night I was working remotely on the computer and had to restart it. It didn't come back up; not a good sign. When the user came to the computer in the morning it was giving the same message. I have found that to make the computer boot, all I have to do is go into the BIOS and "Load Defaults", then restart. It will boot and runs great. Any thoughts on what is causing this situation? Is it MBR corruption? Are some settings being saved in the CMOS? A couple points of mention: I have already attempted looking for a BIOS update for the computer, but the newest is already installed (from 2003). When the computer reboots it either shows "None" for Primary Master, or sometimes it will just not show anything. Thanks, Tom

    Read the article

  • I have been told to accept one error with Memtest86+

    - by DustByte
    Bought a new computer back in August with 4x4 GB RAM. Had problems with the RAM. They sent me four new sticks, which also generated errors. Singled out four sticks (from the eight I now had) that didn't generate any errors. Discovered by coincident a new RAM error last week (this time no BSOD). Contacted the company. According to them there have been issues with a bad stock from last summer so I got two tested 8 GB sticks sent to me. Been running Memtest86+ over the weekend. After 20 hours I got an error (see attached photo). The test has now been running for 37 hours but so far only this one error. I contacted the company where I bought the computer. They wrote back: I wouldn't worry about hat one fail. We have had similar situations here whereby it passes numerous times but then fails once. We think it's an issue with memtest, after all memory is faulty or it isn't so you can't really have it pass a few times, fail the next time around and then pass again! Please trust me on this and continue with the memory we sent you and if your problems continue we'll look at getting it replaced again. I gather from other forum posts that many people do not accept a single error. What could this single error signify, faulty RAM or a glitch in the MEMTEST program (or other)? Update: From the helpful comments below I conclude that an occasional (and rare) "random" error could occur and be acceptable, but repeated errors at the same address would indicate malfunction. Memtest has now run for 45 hours and I still have only one error. For everyone's information, I will keep running the test. In less than two days I am going away for a month. I will most likely leave Memtest running. As I do not have a UPS there is a risk that a power outage will ruin the experiment. The computer is a desktop so I cannot bring it with me (which would curiously have exposed it to more cosmic rays as I will be flying ;)).

    Read the article

  • How does one go about fixing a pixelation issue?

    - by Tyler
    I've been having a lot of trouble with pixelation and also in-game display driver crashes. At first I thought the problem may have been my graphics card (Sapphire 5750) but I have RMA'd it three times and I'm still having trouble. So what I think it might be is my PSU, its 650Watt but its made by Azza so it was cheap and not made by a necessarily good company. Or maybe it could be the CPU (AMD Phenom Black Edition 3.4Ghz) It runs hot (60C) but it passes Everest's test. Someone told me it could be the memory (8GB DDR3) but I don't really see how RAM has anything to do with my problem. So what are some of you suggestions? Here is a video a made awhile ago of what is happening. http://www.metacafe.com/watch/4392213/ati_radeon_5750/ That was just a stress test most games tend to just freeze and crash or lock my system up.

    Read the article

  • Simple electric DC question. Current consumption

    - by Bobb
    Suppose you have DC power supply and a consumer connected to it (i.e. computer PSU and a hard drive). Suppose PSU which was supplied with the consumer has output 5V 1A. So I assume that the consumer should not consume more than 1A. Suppose the original PSU is broken now and I want to replace it with the one I have which is 5V 10A. My guess is that current is something which depends on the consumer. So if the consumer consumes normally 1A then it will not consume more than that even if it is connected to 10A PSU. In other word - am I right assuming that the consumer will not burn out being connected to a power supply with higher current output? P.S. my understanding is that voltage is something independent from the consumer. If you give it higher voltage it will burn (voltage is from PSU to the consumer). However current must be in opposite - consumer sucks as much current as it need not as much as PSU can provide (of course given that max PSU current is greater than the consumer needs)

    Read the article

  • Weird RAM Upgrade Experience

    - by Axel Isouard
    I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

    Read the article

  • Can I create a virtual network interface to connect to a real network device?

    - by michelemarcon
    I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

    Read the article

  • Starting old computer - nothing shown on screen at boot

    - by Jonas
    I'm trying to start an about 10 years old PC computer. But nothing is shown on the screen, and it beeps everytime I press a key on the keyboard. I can press Ctrl+Alt+Del to reboot the computer. The monitor is newer and seem to work with other computers. I don't see anything from POST/BIOS at start or later. I have tried to change to another graphic card, but it didn't change anything. What can I do to solve this problem? Update: I have now tried with another computer (the one where the "another graphic card" came from) and I got the same problem. I doesn't show anything on the screen. Both these computers had a GeForce2 MX 400 graphic card. I tried with another computer screen it didn't work - it was showing "signal out of range". So is the graphic card GeForce2 MX 400 too old for newer TFT-monitors? I tried with a third computer so I know that the monitors are working, and both monitors work fine with that computer.

    Read the article

  • Complete machine freezes...at a loss

    - by user28818
    Guys, We built around 12 machines a few months ago to run Ubuntu. They each have the following specs: ASUS Z8NA-D6 motherboard Dual quad core Intel(R) Xeon(R) CPU E5520 @ 2.27GHz OCZ Mod Extreme Pro 500W power supply 12 GB Kingston RAM Nvidia GeForce 9800 GT graphics card My machine ran well for awhile. However, it started experiencing random lockups. These lockups are not X lockups, they are complete system freezes. The nic stops responding, the magic sysrq buttons won't work. The machine is dead. I first suspected RAM. Memtest86 didn't find anything, but I replaced the RAM anyway. Still, lockups. So I replaced the graphics card. Still, more lockups. They became more and more frequent and started to happen 2-3 times a day. So I replaced the motherboard and power supply in one fell swoop. Suddenly, no more lockups! Woohoo! Except, a week later, in the morning, the machine wouldn't wake up. I reset it, started it up, and the log files showed the last entry at around 11 pm the evening before. This has started occurring with more frequency...now just about every morning I come in, the machine is locked up, and has been since the night before. Yesterday, in the 3 weeks since I replaced the motherboard and power supply, the machine actually locked up on in in mid-work. This is the first time since replacing the two (MB and PS) that this happened while I was using it. All others occurred while I was away. I'm at a loss. Nothing is in syslog or message that would indicate a problem around the time of the lockup. Temps are good...I use lmsensors to monitor and have a script that writes the output to file every minute. They never get that high. The only thing I haven't replaced at this point is the case and the harddrives. I doubt either could be the cause. What would you do if you were in my shoes? Is there a troubleshooting approach I'm missing? For the record, all of the other machines, all eleven of them, don't have any problems. They're all running the same version of Ubuntu (Lucid) that I am. Thanks!

    Read the article

  • Windows Mobile 7 corporate device...

    - by Toymaker
    Does anyone know of a Windows Mobile 7 device aimed at business use? I’m looking for something with bar code scanning capability. Psion, hand held, and honeywell only offer 6.5 at the moment. Granted, Windows Mobile 7 just barely came out and these sorts of devices usually lag a bit behind consumer toys...but hopefully someone can help.

    Read the article

  • Asus Eee replacement netbook monitor doesn't fit connector

    - by Michael Morisy
    I bought a replacement screen for an Asus Eee netbook 1005HA from a company that said the screen they were selling was compatible, but the connector on the replacement is smaller than the original. I've scoured the net for instructions, but so far, I'm out of luck. As far as I can tell, they both have 32 pins, but maybe I'm missing a connector? The replacement is a [LG Philips 10.1 inchs Glossy LED Panel Screen][1]. Picture of two connectors I couldn't include due to low rep. The replacement is on the left.

    Read the article

  • Laptop powering off after 10 mins or so

    - by Jack
    I have no OS installed, and I am trying to use a linux boot disc. However it is not a linux problem....if I just leave the computer on at the no operating system found message, it still turns off. I thought maybe it was overheating, but I am 90% sure that is not the problem. What else could cause this? I should have mentioned, it's a laptop.

    Read the article

  • Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

    - by raldi
    I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

    Read the article

  • Is the cooling fan on a 2004 graphics card really necessary?

    - by Andrew
    I have an old GeForce 6600 card in my computer, circa 2004. Recently the fan has started playing up and making loud irritating noises. I've tried oiling it with no luck. This is the second fan I've put on the card, the stock one broke ages ago. Is a card this old really likely to need a cooling fan or can I remove it altogether? It has a decent heatsink on the chip but there's not a lot of airflow in that part of the box. Edit: I should add that I seem to remember most mid range graphics cards at the time I bought that didn't have fans (pretty sure they had heatsinks only), which is why I'm wondering.

    Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >