Search Results

Search found 16 results on 1 pages for 'rigging'.

Page 1/1 | 1 

  • Fastest approach to 3D animation

    - by HappyFerret
    I'm currently tasked with designing a small HTML5 game. Having done everything by myself so far (3D models, codebase, game design, etc) I'm now at a point where I'm running out of time. I've less than a day to animate and bind everything together. However, that's exactly my problem. I was under the naive impression that everything would be easier if I went with pre-rendered 3D models. However, I didn't consider the most difficult part. Animation. After having spent over an hour trying to figure out messiahStudio, I figured it's time to ask for outside help. Is there any easier solution to 3D animation than 3D rigging? What I'm basically looking for is some sort of tool that allows me to simply grab and move/deform select polygons. It doesn't have to be as life-like and accurate as rigging, just efficient enough. Were the circumstances any different, I might just learn how to rig. But that's sorely out of scope right now. PS:The models were created in Sculptris but are fairly low-poly.

    Read the article

  • XNA: Rotating Bones

    - by MLM
    XNA 4.0 I am trying to learn how to rotate bones on a very simple tank model I made in Cinema 4D. It is rigged by 3 bones, Root - Main - Turret - Barrel I have binded all of the objects to the bones so that all translations/rotations work as planned in C4D. I exported it as .fbx I based my test project after: http://create.msdn.com/en-US/education/catalog/sample/simple_animation I can build successfully with no errors but all the rotations I try to do to my bones have no effect. I can transform my Root successfully using below but the bone transforms have no effect: myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; I am wondering if my model is just not right or something important I am missing in the code. Here is my Game1.cs using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; float aspectRatio; Tank myModel; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here myModel = new Tank(); base.Initialize(); } /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: use this.Content to load your game content here myModel.Load(Content); aspectRatio = graphics.GraphicsDevice.Viewport.AspectRatio; } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here float time = (float)gameTime.TotalGameTime.TotalSeconds; // Move the pieces /* myModel.TurretRotation = (float)Math.Sin(time * 0.333f) * 1.25f; myModel.BarrelRotation = (float)Math.Sin(time * 0.25f) * 0.333f - 0.333f; */ base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // Calculate the camera matrices. float time = (float)gameTime.TotalGameTime.TotalSeconds; Matrix rotation = Matrix.CreateRotationY(MathHelper.ToRadians(45)); Matrix view = Matrix.CreateLookAt(new Vector3(2000, 500, 0), new Vector3(0, 150, 0), Vector3.Up); Matrix projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.PiOver4, graphics.GraphicsDevice.Viewport.AspectRatio, 10, 10000); // TODO: Add your drawing code here myModel.Draw(rotation, view, projection); base.Draw(gameTime); } } } And here is my tank class: using System; using System.Collections.Generic; using System.Linq; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Audio; using Microsoft.Xna.Framework.Content; using Microsoft.Xna.Framework.GamerServices; using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Input; using Microsoft.Xna.Framework.Media; namespace ModelTesting { public class Tank { Model myModel; // Array holding all the bone transform matrices for the entire model. // We could just allocate this locally inside the Draw method, but it // is more efficient to reuse a single array, as this avoids creating // unnecessary garbage. public Matrix[] boneTransforms; // Shortcut references to the bones that we are going to animate. // We could just look these up inside the Draw method, but it is more // efficient to do the lookups while loading and cache the results. ModelBone MainBone; ModelBone TurretBone; ModelBone BarrelBone; // Store the original transform matrix for each animating bone. Matrix MainTransform; Matrix TurretTransform; Matrix BarrelTransform; // current animation positions float turretRotationValue; float barrelRotationValue; /// <summary> /// Gets or sets the turret rotation amount. /// </summary> public float TurretRotation { get { return turretRotationValue; } set { turretRotationValue = value; } } /// <summary> /// Gets or sets the barrel rotation amount. /// </summary> public float BarrelRotation { get { return barrelRotationValue; } set { barrelRotationValue = value; } } /// <summary> /// Load the model /// </summary> public void Load(ContentManager Content) { // TODO: use this.Content to load your game content here myModel = Content.Load<Model>("Models\\simple_tank02"); MainBone = myModel.Bones["Main"]; TurretBone = myModel.Bones["Turret"]; BarrelBone = myModel.Bones["Barrel"]; MainTransform = MainBone.Transform; TurretTransform = TurretBone.Transform; BarrelTransform = BarrelBone.Transform; // Allocate the transform matrix array. boneTransforms = new Matrix[myModel.Bones.Count]; } public void Draw(Matrix world, Matrix view, Matrix projection) { myModel.Root.Transform = world; Matrix turretRotation = Matrix.CreateRotationY(MathHelper.ToRadians(37)); Matrix barrelRotation = Matrix.CreateRotationX(barrelRotationValue); MainBone.Transform = MainTransform; TurretBone.Transform = turretRotation * TurretTransform; BarrelBone.Transform = barrelRotation * BarrelTransform; myModel.CopyAbsoluteBoneTransformsTo(boneTransforms); // Draw the model, a model can have multiple meshes, so loop foreach (ModelMesh mesh in myModel.Meshes) { // This is where the mesh orientation is set foreach (BasicEffect effect in mesh.Effects) { effect.World = boneTransforms[mesh.ParentBone.Index]; effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } // Draw the mesh, will use the effects set above mesh.Draw(); } } } }

    Read the article

  • How to port animation from one skeleton to another?

    - by shawn
    While I need to do this in a Blender3D modeler script, the math should be similar for other modelers or realtime engines. Blender3D specific terminology: Armature = skeleton EditBone = rest pose bone (stores the rest pose matrix) PoseBone = can store a different pose (animation matrix) for each frame of your animation I need to share animations (Blender Actions) between Armatures which have EditBones with same names and which have the same positions, but can have different (rest pose) angles and scales. Plus the Armatures might have different bone hierarchy (bone parenting/ no bone parenting). Why I need this: I've made an importer/exporter for a 3d format for a game. The format doesn't store enough info to connect/parent the bones, which makes posing/animating character models in a 3d modeller nearly impossible (original model files for the 3d modeler don't exist, this is for modding). As there are only 2 character skeleton types in the game, I decided to optionally allow to generate the bone from a hardcoded data in the model importer and undo that in the exporter. This allows to easily pose the model for checking weights, easily create weights, makes it easier for Blender to generate automatic weights and of course makes animating possible. This worked perfectly: the importer optionally generated the Armature itself and the exporter removed those changes, so the exported model works with existing animations in the game. But now I'm writing an importer and exporter for the game's animation format and here come the problems of: Trying to make original animations work in Blender with my "custom" (modified) Armature Trying to make animations created by using the "custom" (modified) Armature work with the original models in the game (and Blender). Constraints or bone snapping inside Blender won't work as they don't care that the bones have different angles in the rest pose, they will still face the same direction. It seems I just need to get the "difference" between the EditBone matrices of all EditBones for the two Armatures somehow and apply that difference to PoseBone matrices of all PoseBones, for all frames of my animation. I need to know how to get that difference and how to apply it. BTW, PoseBone matrices are relative to rest pose, they are by default [1.000000, 0.000000, 0.000000, 0.000000](matrix [row 0]) [0.000000, 1.000000, 0.000000, 0.000000](matrix [row 1]) [0.000000, 0.000000, 1.000000, 0.000000](matrix [row 2]) [0.000000, 0.000000, 0.000000, 1.000000](matrix [row 3]) So the question is: How to get the difference between two bone (EditBone) matrices to apply that difference to the animation matrices (PoseBone matrices)? Please be easy on the matrix math.

    Read the article

  • Why are my 3ds Max .fbx exports huge?

    - by abracadabra1980
    I've made an animation in 3ds Max and want to export it to .fbx and import it into Unity. I've done this once without problems. But this time, my .max file is 2,8MB and my .fbx file came out a huge 630MB! There's nothing wrong with my model: I exported it from a Blender model (to .fbx) and imported it to 3ds max (converted it to an editable poly) to do my rigging and animation. As soon as I import some .bip animations, I get these huge files. Is there a safe way to get smaller file sizes? I don't mind redoing the rigging if I can solve this.

    Read the article

  • In concept how is Animation done?

    - by sharethis
    The first approaches in animation for my game relied mostly on sine and cosine functions with the time as parameter. As a jump a perfect sine function is acceptable but for motions of arms, weapons or face it would look quite unnatural. Moreover patching every animation out of sine and cosine is stretched to its limits soon. I head of skeletons and rigging already. Although I could not implement skeletal animations I can't imagine that quite natural animations in major games are made of static predefined motion states. So how in general is animation done today?

    Read the article

  • Real messy JQUERY...

    - by turborogue
    I'm trying to make a nav dropdown using jquery and css, and I feel like I'm jury-rigging far beyond my needing to, however I'm still new to jquery and can't quite figure out a better/cleaner way to get this to work... Any insight would be GREATLY appreciated.. (using tinypaste just cause it's long) http://tinypaste.com/49e96

    Read the article

  • Seeking an C/C++ OBJ geometry read/write that does not modify the representation

    - by Blake Senftner
    I am seeking a means to read and write OBJ geometry files with logic that does not modify the geometry representation. i.e. read geometry, immediately write it, and a diff of the source OBJ and the one just written will be identical. Every OBJ writing utility I've been able to find online fails this test. I am writing small command line tools to modify my OBJ geometries, and I need to write my results, not just read the geometry for rendering purposes. Simply needing to write the geometry knocks out 95% of the OBJ libraries on the web. Also, many of the popular libraries modify the geometry representation. For example, Nat Robbin's GLUT library includes the GLM library, which both converts quads to triangles, as well as reverses the topology (face ordering) of the geometry. It's still the same geometry, but if your tool chain expects a given topology, such as for rigging or morph targets, then GLM is useless. I'm not rendering in these tools, so dependencies like OpenGL or GLUT make no sense. And god forbid, do not "optimize" the geometry! Redundant vertices are on purpose for maintaining oneself on cache with our weird little low memory mobile devices.

    Read the article

  • Transition from 2D to 3D Game development [closed]

    - by jakebird451
    I have been working in the 2D world for a long time from manual blitting in windows to SDL to Python (pygame, pyopengl) and a bunch in between. Needless to say I have been programming for a while. So a while ago I started to program in OpenGL via C++ on my Mac. I then got a little intricate with my work after a while (3D models with skeleton structure and terrain development). After a long time of tinkering, I stopped due to the heavy work just to yield a low level understanding of how OpenGL works. Still interested in Graphics and Game Development I went on a search for a stable game engine with some features to grow on. Licence Requirement: Anything other than GPL (LGPL will do) OS Requirement: Mac & Windows Shader: GLSL or CG (GLSL preferred due to experience) Models: Any model structure with rigging (bone) support & animation I am looking at http://www.ogre3d.org/ currently and am starting to meddle around with some examples. However I am a little reluctant to spend a lot of time on it only to yield another dead end. So instead of falling down a spiraling black pit, I am posting my question to you guys to lead me in the right direction based on my requirements. How was your experience with the engine you recommend? Is it well documented? Does it have well documented examples? Any library requirements (Boost, libpng, etc)?

    Read the article

  • What is the breakdown of jobs in game development?

    - by Destry Ullrich
    There's a project I'm trying to start for Indie Game Development; specifically, it's going to be a social networking website that lets developers meet through (It's a secret). One of the key components is showing what skills members have. Question: I need to know what MAJOR game development roles are not represented in the following list, keeping in mind that many specialist roles are being condensed into more broad, generalist roles: Art Animator (Characters, creatures, props, etc.) Concept Artist (2D scenes, environments, props, silhouettes, etc.) Technical Artist (UI artists, typefaces, graphic designers, etc.) 3D Artist (Modeling, rigging, texture, lighting, etc.) Audio Composer (Scores, music, etc.) Sound Engineer (SFX, mood setting, audio implementation, etc.) Voice (Dialog, acting, etc.) Design Creative Director (Initial direction, team management, communications, etc.) Gameplay Designer (Systems, mechanics, control mapping, etc.) World Designer (Level design, aesthetics, game progression, events, etc.) Writer (Story, mythos, dialog, flavor text, etc.) Programming Engine Programming (Engine creation, scripting, physics, etc.) Graphics Engineer (Sprites, lighting, GUI, etc.) Network Engineer (LAN, multiplayer, server support, etc.) Technical Director (I don't know what a technical director would even do.) Post Script: I have an art background, so i'm not familiar with what the others behind game creation actually do. What's missing from this list, and if you feel some things should be changed around how so?

    Read the article

  • Is c++ explicit conversion really that bad?

    - by LoudNPossiblyRight
    My knowledge in c++ at this point is more academic than anything else and in all my reading thus far, the use of explicit conversion with named casts (const_cast, static_cast, reinterpret_cast, dynamic_cast) has come with a big warning label (and it's easy to see why) that pretty much implies explicit conversion is symptomatic of bad design and should only be used as a last resort in desperate circumstances. So i have to ask: Is explicit conversion with named casts really just jury rigging code or is there a more graceful and positive application to this feature? Is there a good example of the latter? Thanks in advance.

    Read the article

  • How to suggest using an ORM instead of stored procedures?

    - by Wayne M
    I work at a company that only uses stored procedures for all data access, which makes it very annoying to keep our local databases in sync as every commit we have to run new procs. I have used some basic ORMs in the past and I find the experience much better and cleaner. I'd like to suggest to the development manager and rest of the team that we look into using an ORM Of some kind for future development (the rest of the team are only familiar with stored procedures and have never used anything else). The current architecture is .NET 3.5 written like .NET 1.1, with "god classes" that use a strange implementation of ActiveRecord and return untyped DataSets which are looped over in code-behind files - the classes work something like this: class Foo { public bool LoadFoo() { bool blnResult = false; if (this.FooID == 0) { throw new Exception("FooID must be set before calling this method."); } DataSet ds = // ... call to Sproc if (ds.Tables[0].Rows.Count > 0) { foo.FooName = ds.Tables[0].Rows[0]["FooName"].ToString(); // other properties set blnResult = true; } return blnResult; } } // Consumer Foo foo = new Foo(); foo.FooID = 1234; foo.LoadFoo(); // do stuff with foo... There is pretty much no application of any design patterns. There are no tests whatsoever (nobody else knows how to write unit tests, and testing is done through manually loading up the website and poking around). Looking through our database we have: 199 tables, 13 views, a whopping 926 stored procedures and 93 functions. About 30 or so tables are used for batch jobs or external things, the remainder are used in our core application. Is it even worth pursuing a different approach in this scenario? I'm talking about moving forward only since we aren't allowed to refactor the existing code since "it works" so we cannot change the existing classes to use an ORM, but I don't know how often we add brand new modules instead of adding to/fixing current modules so I'm not sure if an ORM is the right approach (too much invested in stored procedures and DataSets). If it is the right choice, how should I present the case for using one? Off the top of my head the only benefits I can think of is having cleaner code (although it might not be, since the current architecture isn't built with ORMs in mind so we would basically be jury-rigging ORMs on to future modules but the old ones would still be using the DataSets) and less hassle to have to remember what procedure scripts have been run and which need to be run, etc. but that's it, and I don't know how compelling an argument that would be. Maintainability is another concern but one that nobody except me seems to be concerned about.

    Read the article

  • ClickOnce Deployment Error - Access to the Path is Denied

    - by michael.lukatchik
    I have a WPF app that I'm deploying to a network path using ClickOnce deployment. After the app is deployed to a network location, I use the ClickOnce html page to launch the installation process. I am successfully able to download and install the app. However, my users are not able to download and install the app. When a user navigates to the ClickOnce html page and clicks to begin the installation process, the following error message is received: ERROR SUMMARY Below is a summary of the errors, details of these errors are listed later in the log. * Activation of http://software.mycompany.com/myapp/myapp.application resulted in exception. Following failure messages were detected: + Downloading file://dev/webs/software/myapp/myapp.application did not succeed. * [4/5/2010 1:56:59 PM] System.Deployment.Application.DeploymentDownloadException (Unknown subtype) - Downloading file://dev/Webs/software/myapp/myapp.application did not succeed. All signs point to this being a security issue. So, I've done the following: Ensured that "Everyone" had read access to the files that were being deployed as part of my project Ensured that "Everyone" had read access to the network location where the app was deployed (//dev/webs/software/myapp) Ensured that "Everyone" had read access to the IIS path where the ClickOnce html page is located In each of these cases, I've made no progress in getting the app to successfully deploy via ClickOnce. Again, the odd thing is that I am able to successfully walk through the process of downloading and installing the app. It's my users, though, that need the ability to download and install the app. I've looked extensively on the web for answers, but there hasn't been much. I'd like to resolve the issue without "re-installing" or "rigging" anything. I need a solid answer. Thank you all for your input!! Mike

    Read the article

  • With the advent of HTML 5, is there a point in using COMET anymore?

    - by h2g2java
    I am very tempted to use long wait http or periodic polling by the client to set up pseudo-sockets on the browser side, for an application that would be used publicly. But then on the 2nd thought, I am thinking HTML 5 is here. But on the 3rd thought, what is the percentage of browsers out there that remain non-HTML5 within 12 months, 24 months, 36 months? If there are at least 20% of browsers still incapable of HTML5, then I cannot depend on HTML5 because 20% of users not being able to access an application is a significant amount. What do you think, how would your advice be (to me and to developers in general)? Q1. Is there any point in rigging in COMET into an application anymore? I am thinking of gwt comet - http://code.google.com/p/gwt-comet/. Q2. Should we release a new public application within the next 2 months that is dependent on HTML5 sockets and tell non-HTML5 browser users "sorry, your browser version cannot access this application"? Or should we architect the apps to use communication like GWT RPC? Q3. I am also very distrustful of long wait http request. I have never used it before but I have a horrible feeling about it. I have been using 10 to 20 second client-side polling. Is long wait http request risky (risk of hanging a browser session)? Does long wait request present any additional security risk?

    Read the article

  • NINE Questions with Michelle Juett

    - by NINEQuestions
    Michelle Juett is one of the more interesting people I know, even though we’ve never met face to face. She’s part artist, part techie and all cool. We “met” via my good buddy George Clingerman and have plotting to take over the world, errr… I mean “collaborating” ever since. If you happen to live in the Seattle area, you can catch her and her work at Sakura Con on April 2-4, 2010 and various other gamer and art cons throughout the year. You can also find her on Twitter as @Shelldragon. Now that you know a little bit, I’ll let her tell you the rest of the story in these NINE Questions: 1. Where are you from? I was born in Clearwater, Florida. I like to tell people I'm from the Bermuda Triangle, it just makes explaining myself so much easier. My family moved to Washington when I was 5 and I've been in the Pacific Northwest ever since. We like to QQ about the rain but we really love the green trees and clean water. 2. What do you do? I fight evil by moonlight and win love by daylight.. or something like that.  I’ve been in quality assurance for games during the day since January 2008 and an artist for life. I currently work in QA for a really awesome game company in Bellevue.  At home, I work on personal digital art, making game assets as well as other random freelance projects as they pop up. 3. How did you get to where you are now? I'm still not where I want to be but I'm getting closer. The biggest piece of advice I can give is to work hard and never settle for the minimum required. I tend to overwork myself but I've never regretted it. You can want something really bad but if you aren't willing to work for it, then you can't expect it to just happen. I've always drawn and had an unhealthy love for video games that I was told I’d grow out of.  I knew I would not ‘grow out’ of games and that real adults make them and I could too. After I graduated, in searching for jobs, I discovered game testing. I figured this would be a good way to get my foot in the door and start networking. I’ve worked with consoles, websites and now, PC games.  I stuck with my journey, although it has been a rocky one, daylighting as a tester and moonlighting as an artist. I'm still on that journey but I wouldn't have it any other way. Test has given me a perspective that is difficult, if not impossible, to obtain any other way. It gives an unconditional respect for other hard working testers and an insight into creative problem solving. 4. So video game testing probably sounds WAY cooler than the reality. What's it like? What's a given day for you? Game testers don't get a lot of respect because of their stigmas and the fact most people don't actually know what we do.  People hear about the opening and closing disc trays all day. Many places do treat their testers like numbers. It all depends on where you work and how awesome your company is. I've had to deal with a lot of bad work situations to get to a really good one. QA exists to ensure the game is as flawless and enjoyable as it can be by the time it has to leave the nest and go out into the world. This includes everything obvious: “can I beat the level and save the princess?” to the more obscure: ‘What happens when I lose internet connection while trying to save right before falling into a pit to my death while holding the jump key then my cat pulls out my memory card and hides it in her litter box?” On the dev side, for developers, testers can be very scary people. Especially when the test team is not in house and you can’t see each other’s faces.  I've seen both sides. We don't mean to hurt your feelings. We really DO love you and want your game to be the best it can be! It can be some serious tough love. 5. You are also an accomplished artist. Got any major projects right now you'd like to talk about? LOL, I don't know if I’d say I'm an accomplished artist just yet. I’m still a long way from where I want to be. I figure that’s what makes you grow though: the desire to never stop improving. I like QA but I want to be a full time artist. I was lucky enough to register for a table at Sakura Con in the 11 second window that the tables sold out. As such, I’ll be selling my wares in the Artist Alley April 2-4th. Part of preparing for this is actually making the art to be sold there. Anime is a fun pass time but I don’t draw a whole lot of it so I’m making up for lost time. As I seem to enjoy burying myself in work, I’m an art lead for a secret project that’s so secret I might be killed tonight for even mentioning it. I also take on various freelance projects and do what I can to help out indie games. I discovered the XNA community a year and a half ago and developed a love for Indies when I was writing a weekly newsletter on XBLA news. I’m a little late to the party but I find myself in a unique position where I am an artist and also have technical skills in games. While not programmer myself, I have a lot of game sense and experience. I hope to make some awesome happen. Lastly, I have an ongoing web comic Shell’s Angels) that tends to get neglected when I get busy. I still love drawing comics and keep a little book with me to sketch down ideas as they pop into my head. I may pick it back up again as a larger project sometime in the future. 6. Can you talk about any of the other freelance projects you're doing or are you sworn to secrecy on those too? We wouldn't want a team of game developer ninjas to take you out or anything. All my projects are currently 2d. I have personal projects such as the ongoing comic as well as a graphic novel I've been picking at here and there. My main focus until April is Sakura Con, Sakura Con, Sakura Con.  I see it as a great way to get exposure and convention experience. I found out I love conventions a couple years ago and I want to get more involved in them. 7. As an artist, what is your weapon of choice? What do you use to get most of your stuff done? I am a Photoshop Hero and I have the hoodie to prove it. (http://www.pennyarcademerch.com/pah090011.html) I've dabbled in other paint programs but I always gravitate back to Photoshop. She is my one true love. I'd like to learn programs like Flash or Anime Studio when I get a bit more time because of their animation abilities. I've worked on frame by frame animation forever but I would love to learn 2d rigging. Still, nothing can compare to a simple sketchpad and a pencil. I always have one on me in case I come across or think of something interesting and can't get to a computer. If the Courier ever comes to exist it will be an ideal weapon for me. 8. You did some videos too, depicting the art creation process. What was the motivation behind those? The creative process is just as important as the final product, if not more so.  I've always loved watching speed paint videos and wanted to try it out myself. Turns out it's a lot of work and time but it's definitely fun to go back and rewatch them. Art isn't always the end result and is more often the process itself. 9. Got any interesting tattoos? Designed any for yourself or other people? Not yet, but not for lack of desire. I've toiled over what and where for years. Last year, I finally decided the back of my shoulders would be the place. Like anything permanent, I want it to have meaning. I thought of somehow incorporating games but I couldn't find something I felt would stand the test of time even with all the classic sprite games. I'm very picky so we'll see if I can get something solid decided. Come see me at Sakura Con April 2 -4!!!

    Read the article

  • How to shoot yourself in the foot (DO NOT Read in the office)

    - by TATWORTH
    Originally posted on: http://geekswithblogs.net/TATWORTH/archive/2013/06/21/how-to-shoot-yourself-in-the-foot-do-not-read.aspxLet me make it absolutely clear - the following is:merely collated by your Geek from http://www.codeproject.com/Lounge.aspx?msg=3917012#xx3917012xxvery, very very funny so you read it in the presence of others at your own riskso here is the list - you have been warned!C You shoot yourself in the foot.   C++ You accidently create a dozen instances of yourself and shoot them all in the foot. Providing emergency medical assistance is impossible since you can't tell which are bitwise copies and which are just pointing at others and saying "That's me, over there."   FORTRAN You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you have no exception-handling facility.   Modula-2 After realizing that you can't actually accomplish anything in this language, you shoot yourself in the head.   COBOL USEing a COLT 45 HANDGUN, AIM gun at LEG.FOOT, THEN place ARM.HAND.FINGER on HANDGUN.TRIGGER and SQUEEZE. THEN return HANDGUN to HOLSTER. CHECK whether shoelace needs to be retied.   Lisp You shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds the gun with which you shoot yourself in the appendage which holds...   BASIC Shoot yourself in the foot with a water pistol. On big systems, continue until entire lower body is waterlogged.   Forth Foot yourself in the shoot.   APL You shoot yourself in the foot; then spend all day figuring out how to do it in fewer characters.   Pascal The compiler won't let you shoot yourself in the foot.   Snobol If you succeed, shoot yourself in the left foot. If you fail, shoot yourself in the right foot.   HyperTalk Put the first bullet of the gun into foot left of leg of you. Answer the result.   Prolog You tell your program you want to be shot in the foot. The program figures out how to do it, but the syntax doesn't allow it to explain.   370 JCL You send your foot down to MIS with a 4000-page document explaining how you want it to be shot. Three years later, your foot comes back deep-fried.   FORTRAN-77 You shoot yourself in each toe, iteratively, until you run out of toes, then you read in the next foot and repeat. If you run out of bullets, you continue anyway because you still can't do exception-processing.   Modula-2 (alternative) You perform a shooting on what might be currently a foot with what might be currently a bullet shot by what might currently be a gun.   BASIC (compiled) You shoot yourself in the foot with a BB using a SCUD missile launcher.   Visual Basic You'll really only appear to have shot yourself in the foot, but you'll have so much fun doing it that you won't care.   Forth (alternative) BULLET DUP3 * GUN LOAD FOOT AIM TRIGGER PULL BANG! EMIT DEAD IF DROP ROT THEN (This takes about five bytes of memory, executes in two to ten clock cycles on any processor and can be used to replace any existing function of the language as well as in any future words). (Welcome to bottom up programming - where you, too, can perform compiler pre-processing instead of writing code)   APL (alternative) You hear a gunshot and there's a hole in your foot, but you don't remember enough linear algebra to understand what happened. or @#&^$%&%^ foot   Pascal (alternative) Same as Modula-2 except that the bullet is not the right type for the gun and your hand is blown off.   Snobol (alternative) You grab your foot with your hand, then rewrite your hand to be a bullet. The act of shooting the original foot then changes your hand/bullet into yet another foot (a left foot).   Prolog (alternative) You attempt to shoot yourself in the foot, but the bullet, failing to find its mark, backtracks to the gun, which then explodes in your face.   COMAL You attempt to shoot yourself in the foot with a water pistol, but the bore is clogged, and the pressure build-up blows apart both the pistol and your hand. or draw_pistol aim_at_foot(left) pull_trigger hop(swearing)   Scheme As Lisp, but none of the other appendages are aware of this happening.   Algol You shoot yourself in the foot with a musket. The musket is aesthetically fascinating and the wound baffles the adolescent medic in the emergency room.   Ada If you are dumb enough to actually use this language, the United States Department of Defense will kidnap you, stand you up in front of a firing squad and tell the soldiers, "Shoot at the feet." or The Department of Defense shoots you in the foot after offering you a blindfold and a last cigarette. or After correctly packaging your foot, you attempt to concurrently load the gun, pull the trigger, scream and shoot yourself in the foot. When you try, however, you discover that your foot is of the wrong type. or After correctly packing your foot, you attempt to concurrently load the gun, pull the trigger, scream, and confidently aim at your foot knowing it is safe. However the cordite in the round does an Unchecked Conversion, fires and shoots you in the foot anyway.   Eiffel   You create a GUN object, two FOOT objects and a BULLET object. The GUN passes both the FOOT objects a reference to the BULLET. The FOOT objects increment their hole counts and forget about the BULLET. A little demon then drives a garbage truck over your feet and grabs the bullet (both of it) on the way. Smalltalk You spend so much time playing with the graphics and windowing system that your boss shoots you in the foot, takes away your workstation and makes you develop in COBOL on a character terminal. or You send the message shoot to gun, with selectors bullet and myFoot. A window pops up saying Gunpowder doesNotUnderstand: spark. After several fruitless hours spent browsing the methods for Trigger, FiringPin and IdealGas, you take the easy way out and create ShotFoot, a subclass of Foot with an additional instance variable bulletHole. Object Oriented Pascal You perform a shooting on what might currently be a foot with what might currently be a bullet fired from what might currently be a gun.   PL/I You consume all available system resources, including all the offline bullets. The Data Processing & Payroll Department doubles its size, triples its budget, acquires four new mainframes and drops the original one on your foot. Postscript foot bullets 6 locate loadgun aim gun shoot showpage or It takes the bullet ten minutes to travel from the gun to your foot, by which time you're long since gone out to lunch. The text comes out great, though.   PERL You stab yourself in the foot repeatedly with an incredibly large and very heavy Swiss Army knife. or You pick up the gun and begin to load it. The gun and your foot begin to grow to huge proportions and the world around you slows down, until the gun fires. It makes a tiny hole, which you don't feel. Assembly Language You crash the OS and overwrite the root disk. The system administrator arrives and shoots you in the foot. After a moment of contemplation, the administrator shoots himself in the foot and then hops around the room rabidly shooting at everyone in sight. or You try to shoot yourself in the foot only to discover you must first reinvent the gun, the bullet, and your foot.or The bullet travels to your foot instantly, but it took you three weeks to load the round and aim the gun.   BCPL You shoot yourself somewhere in the leg -- you can't get any finer resolution than that. Concurrent Euclid You shoot yourself in somebody else's foot.   Motif You spend days writing a UIL description of your foot, the trajectory, the bullet and the intricate scrollwork on the ivory handles of the gun. When you finally get around to pulling the trigger, the gun jams.   Powerbuilder While attempting to load the gun you discover that the LoadGun system function is buggy; as a work around you tape the bullet to the outside of the gun and unsuccessfully attempt to fire it with a nail. In frustration you club your foot with the butt of the gun and explain to your client that this approximates the functionality of shooting yourself in the foot and that the next version of Powerbuilder will fix it.   Standard ML By the time you get your code to typecheck, you're using a shoot to foot yourself in the gun.   MUMPS You shoot 583149 AK-47 teflon-tipped, hollow-point, armour-piercing bullets into even-numbered toes on odd-numbered feet of everyone in the building -- with one line of code. Three weeks later you shoot yourself in the head rather than try to modify that line.   Java You locate the Gun class, but discover that the Bullet class is abstract, so you extend it and write the missing part of the implementation. Then you implement the ShootAble interface for your foot, and recompile the Foot class. The interface lets the bullet call the doDamage method on the Foot, so the Foot can damage itself in the most effective way. Now you run the program, and call the doShoot method on the instance of the Gun class. First the Gun creates an instance of Bullet, which calls the doFire method on the Gun. The Gun calls the hit(Bullet) method on the Foot, and the instance of Bullet is passed to the Foot. But this causes an IllegalHitByBullet exception to be thrown, and you die.   Unix You shoot yourself in the foot or % ls foot.c foot.h foot.o toe.c toe.o % rm * .o rm: .o: No such file or directory % ls %   370 JCL (alternative) You shoot yourself in the head just thinking about it.   DOS JCL You first find the building you're in in the phone book, then find your office number in the corporate phone book. Then you have to write this down, then describe, in cubits, your exact location, in relation to the door (right hand side thereof). Then you need to write down the location of the gun (loading it is a proprietary utility), then you load it, and the COBOL program, and run them, and, with luck, it may be run tonight.   VMS   $ MOUNT/DENSITY=.45/LABEL=BULLET/MESSAGE="BYE" BULLET::BULLET$GUN SYS$BULLET $ SET GUN/LOAD/SAFETY=OFF/SIGHT=NONE/HAND=LEFT/CHAMBER=1/ACTION=AUTOMATIC/ LOG/ALL/FULL SYS$GUN_3$DUA3:[000000]GUN.GNU $ SHOOT/LOG/AUTO SYS$GUN SYS$SYSTEM:[FOOT]FOOT.FOOT   %DCL-W-ACTIMAGE, error activating image GUN -CLI-E-IMGNAME, image file $3$DUA240:[GUN]GUN.EXE;1 -IMGACT-F-NOTNATIVE, image is not an OpenVMS Alpha AXP image or %SYS-F-FTSHT, foot shot (fifty lines of traceback omitted) sh,csh, etc You can't remember the syntax for anything, so you spend five hours reading manual pages, then your foot falls asleep. You shoot the computer and switch to C.   Apple System 7 Double click the gun icon and a window giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small bomb appears with note "Error of Type 1 has occurred."   Windows 3.1 Double click the gun icon and wait. Eventually a window opens giving a selection for guns, target areas, plus balloon help with medical remedies, and assorted sound effects. Click "shoot" button and a small box appears with note "Unable to open Shoot.dll, check that path is correct."   Windows 95 Your gun is not compatible with this OS and you must buy an upgrade and install it before you can continue. Then you will be informed that you don't have enough memory.   CP/M I remember when shooting yourself in the foot with a BB gun was a big deal.   DOS You finally found the gun, but can't locate the file with the foot for the life of you.   MSDOS You shoot yourself in the foot, but can unshoot yourself with add-on software.   Access You try to point the gun at your foot, but it shoots holes in all your Borland distribution diskettes instead.   Paradox Not only can you shoot yourself in the foot, your users can too.   dBase You squeeze the trigger, but the bullet moves so slowly that by the time your foot feels the pain, you've forgotten why you shot yourself anyway. or You buy a gun. Bullets are only available from another company and are promised to work so you buy them. Then you find out that the next version of the gun is the one scheduled to actually shoot bullets.   DBase IV, V1.0 You pull the trigger, but it turns out that the gun was a poorly designed hand grenade and the whole building blows up.   SQL You cut your foot off, send it out to a service bureau and when it returns, it has a hole in it but will no longer fit the attachment at the end of your leg. or Insert into Foot Select Bullet >From Gun.Hand Where Chamber = 'LOADED' And Trigger = 'PULLED'   Clipper You grab a bullet, get ready to insert it in the gun so that you can shoot yourself in the foot and discover that the gun that the bullets fits has not yet been built, but should be arriving in the mail _REAL_SOON_NOW_. Oracle The menus for coding foot_shooting have not been implemented yet and you can't do foot shooting in SQL.   English You put your foot in your mouth, then bite it off. (For those who don't know, English is a McDonnell Douglas/PICK query language which allegedly requires 110% of system resources to run happily.) Revelation [an implementation of the PICK Operating System] You'll be able to shoot yourself in the foot just as soon as you figure out what all these bullets are for.   FlagShip Starting at the top of your head, you aim the gun at yourself repeatedly until, half an hour later, the gun is finally pointing at your foot and you pull the trigger. A new foot with a hole in it appears but you can't work out how to get rid of the old one and your gun doesn't work anymore.   FidoNet You put your foot in your mouth, then echo it internationally.   PicoSpan [a UNIX-based computer conferencing system] You can't shoot yourself in the foot because you're not a host. or (host variation) Whenever you shoot yourself in the foot, someone opens a topic in policy about it.   Internet You put your foot in your mouth, shoot it, then spam the bullet so that everybody gets shot in the foot.   troff rmtroff -ms -Hdrwp | lpr -Pwp2 & .*place bullet in footer .B .NR FT +3i .in 4 .bu Shoot! .br .sp .in -4 .br .bp NR HD -2i .*   Genetic Algorithms You create 10,000 strings describing the best way to shoot yourself in the foot. By the time the program produces the optimal solution, humans have evolved wings and the problem is moot.   CSP (Communicating Sequential Processes) You only fail to shoot everything that isn't your foot.   MS-SQL Server MS-SQL Server’s gun comes pre-loaded with an unlimited supply of Teflon coated bullets, and it only has two discernible features: the muzzle and the trigger. If that wasn't enough, MS-SQL Server also puts the gun in your hand, applies local anesthetic to the skin of your forefinger and stitches it to the gun's trigger. Meanwhile, another process has set up a spinal block to numb your lower body. It will then proceeded to surgically remove your foot, cryogenically freeze it for preservation, and attach it to the muzzle of the gun so that no matter where you aim, you will shoot your foot. In order to avoid shooting yourself in the foot, you need to unstitch your trigger finger, remove your foot from the muzzle of the gun, and have it surgically reattached. Then you probably want to get some crutches and go out to buy a book on SQL Server Performance Tuning.   Sybase Sybase's gun requires assembly, and you need to go out and purchase your own clip and bullets to load the gun. Assembly is complicated by the fact that Sybase has hidden the gun behind a big stack of reference manuals, but it hasn't told you where that stack is. While you were off finding the gun, assembling it, buying bullets, etc., Sybase was also busy surgically removing your foot and cryogenically freezing it for preservation. Instead of attaching it to the muzzle of the gun, though, it packed your foot on dry ice and sent it UPS-Ground to an unnamed hookah bar somewhere in the middle east. In order to shoot your foot, you must modify your gun with a GPS system for targeting and hire some guy named "Indy" to find the hookah bar and wire the coordinates back to you. By this time, you've probably become so daunted at the tasks stand between you and shooting your foot that you hire a guy who's read all the books on Sybase to help you shoot your foot. If you're lucky, he'll be smart enough both to find your foot and to stop you from shooting it.   Magic software You spend 1 week looking up the correct syntax for GUN. When you find it, you realise that GUN will not let you shoot in your own foot. It will allow you to shoot almost anything but your foot. You then decide to build your own gun. You can't use the standard barrel since this will only allow for standard bullets, which will not fire if the barrel is pointed at your foot. After four weeks, you have created your own custom gun. It blows up in your hand without warning, because you failed to initialise the safety catch and it doesn't know whether the initial state is "0", 0, NULL, "ZERO", 0.0, 0,0, "0.0", or "0,00". You fix the problem with your remaining hand by nesting 12 safety catches, and then decide to build the gun without safety catch. You then shoot the management and retire to a happy life where you code in languages that will allow you to shoot your foot in under 10 days.FirefoxLets you shoot yourself in as many feet as you'd like, while using multiple great addons! IEA moving target in terms of standard ammunition size and doesn't always work properly with non-Microsoft ammunition, so sometimes you shoot something other than your foot. However, it's the corporate world's standard foot-shooting apparatus. Hackers seem to enjoy rigging websites up to trigger cascading foot-shooting failures. Windows 98 About the same as Windows 95 in terms of overall bullet capacity and triggering mechanisms. Includes updated DirectShot API. A new version was released later on to support USB guns, Windows 98 SE.WPF:You get your baseball glove and a ball and you head out to your backyard, where you throw balls to your pitchback. Then your unkempt-haired-cargo-shorts-and-sandals-with-white-socks-wearing neighbor uses XAML to sculpt your arm into a gun, the ball into a bullet and the pitchback into your foot. By now, however, only the neighbor can get it to work and he's only around from 6:30 PM - 3:30 AM. LOGO: You very carefully lay out the trajectory of the bullet. Then you start the gun, which fires very slowly. You walk precisely to the point where the bullet will travel and wait, but just before it gets to you, your class time is up and one of the other kids has already used the system to hack into Sony's PS3 network. Flash: Someone has designed a beautiful-looking gun that anyone can shoot their feet with for free. It weighs six hundred pounds. All kinds of people are shooting themselves in the feet, and sending the link to everyone else so that they can too. That is, except for the criminals, who are all stealing iOS devices that the gun won't work with.APL: Its (mostly) all greek to me. Lisp: Place ((gun in ((hand sight (foot then shoot))))) (Lots of Insipid Stupid Parentheses)Apple OS/X and iOS Once a year, Steve Jobs returns from sick leave to tell millions of unwavering fans how they will be able to shoot themselves in the foot differently this year. They retweet and blog about it ad nauseam, and wait in line to be the first to experience "shoot different".Windows ME Usually fails, even at shooting you in the foot. Yo dawg, I heard you like shooting yourself in the foot. So I put a gun in your gun, so you can shoot yourself in the foot while you shoot yourself in the foot. (Okay, I'm not especially proud of this joke.) Windows 2000 Now you really do have to log in, before you are allowed to shoot yourself in the foot.Windows XPYou thought you learned your lesson: Don't use Windows ME. Then, along came this new creature, built on top of Windows NT! So you spend the next couple days installing antivirus software, patches and service packs, just so you can get that driver to install, and then proceed to shoot yourself in the foot. Windows Vista Newer! Glossier! Shootier! Windows 7 The bullets come out a lot smoother. Active Directory Each bullet now has an attached Bullet Identifier, and can be uniquely identified. Policies can be applied to dictate fragmentation, and the gun will occasionally have a confusing delay after the trigger has been pulled. PythonYou try to use import foot; foot.shoot() only to realize that's only available in 3.0, to which you can't yet upgrade from 2.7 because of all those extension libs lacking support. Solaris Shoots best when used on SPARC hardware, but still runs the trigger GUI under Java. After weeks of learning the appropriate STOP command to prevent the trigger from automatically being pressed on boot, you think you've got it under control. Then the one time you ever use dtrace, it hits a bug that fires the gun. MySQL The feature that allows you to shoot yourself in the foot has been in development for about 6 years, and they are adding it into the next version, which is coming out REAL SOON NOW, promise! But you can always check it out of source control and try it yourself (just not in any environment where data integrity is important because it will probably explode.) PostgreSQLAllows you to have a smug look on your face while you shoot yourself in the foot, because those MySQL guys STILL don't have that feature. NoSQL Barrel? Who needs a barrel? Just put the bullet on your foot, and strike it with a hammer. See? It's so much simpler and more efficient that way. You can even strike multiple bullets in one swing if you swing with a good enough arc, because hammers are easy to use. Getting them to synchronize is a little difficult, though.Eclipse There are about a dozen different packages for shooting yourself in the foot, with weird interdependencies on outdated components. Once you finally navigate the morass and get one installed, you then have something to look at while you shoot yourself in the foot with that package: You can watch the screen redraw.Outlook Makes it really easy to let everyone know you shot yourself in the foot!Shooting yourself in the foot using delegates.You really need to shoot yourself in the foot but you hate firearms (you don't want any dependency on the specifics of shooting) so you delegate it to somebody else. You don't care how it is done as long is shooting your foot. You can do it asynchronously in case you know you may faint so you are called back/slapped in the face by your shooter/friend (or background worker) when everything is done.C#You prepare the gun and the bullet, carefully modeling all of the physics of a bullet traveling through a foot. Just before you're about to pull the trigger, you stumble on System.Windows.BodyParts.Foot.ShootAt(System.Windows.Firearms.IGun gun) in the extended framework, realize you just wasted the entire afternoon, and shoot yourself in the head.PHP<?phprequire("foot_safety_check.php");?><!DOCTYPE HTML><html><head> <!--Lower!--><title>Shooting me in the foot</title></head> <body> <!--LOWER!!!--><leg> <!--OK, I made this one up...--><footer><?php echo (dungSift($_SERVER['HTTP_USER_AGENT'], "ie"))?("Your foot is safe, but you might want to wear a hard hat!"):("<div class=\"shot\">BANG!</div>"); ?></footer></leg> </body> </html>

    Read the article

  • What arguments do I send a function being called by a button in python?

    - by Jared
    I have a UI, in that UI is 4 text fields and 1 int field, then I have a function that calls to another function based on what's inside of the text fields, this function has (self, *args). My function that is being called to takes five arguments and I don't know what to put in it to make it actually work with my UI because python button's send an argument of their own. I have tried self and *args, but it doesn't work. Here is my code, didn't include most of the UI code since it is self explanatory: def crBC(self, IKJoint, FKJoint, bindJoint, xQuan, switch): ''' You should have a controller with an attribute 'ikFkBlend' - The name can be changed after the script executes. Controller should contain an enum - FK/DYN(0), IK(1). Specify the IK joint, then either the dynamic or FK joint, then the bind joint. Then a quantity of joints to pass through and connect. Tested currently on 600 joints (200 x 3), executed in less than a second. Returns nothing. Please open your script editor for details. ''' import itertools # gets children joints of the selected joint chHipIK = cmds.listRelatives(IKJoint, ad = True, type = 'joint') chHipFK = cmds.listRelatives(FKJoint, ad = True, type = 'joint') chHipBind = cmds.listRelatives(bindJoint, ad = True, type = 'joint') # list is built backwards, this reverses the list chHipIK.reverse() chHipFK.reverse() chHipBind.reverse() # appends the initial joint to the list chHipIK.append(IKJoint) chHipFK.append(FKJoint) chHipBind.append(bindJoint) # puts the last joint at the start of the list because the initial joint # was added to the end chHipIK.insert(0, chHipIK.pop()) chHipFK.insert(0, chHipFK.pop()) chHipBind.insert(0, chHipBind.pop()) # pops off the remaining joints in the list the user does not wish to be blended chHipBind[xQuan:] = [] chHipIK[xQuan:] = [] chHipFK[xQuan:] = [] # goes through the bind joints, makes a blend colors for each one, connects # the switch to the blender for a, b, c in itertools.izip(chHipBind, chHipIK, chHipFK): rotBC = cmds.shadingNode('blendColors', asUtility = True, n = a + 'rotate_BC') tranBC = cmds.shadingNode('blendColors', asUtility = True, n = a + 'tran_BC') scaleBC = cmds.shadingNode('blendColors', asUtility = True, n = a + 'scale_BC') cmds.connectAttr(switch + '.ikFkSwitch', rotBC + '.blender') cmds.connectAttr(switch + '.ikFkSwitch', tranBC + '.blender') cmds.connectAttr(switch + '.ikFkSwitch', scaleBC + '.blender') # goes through the ik joints, connects to the blend colors cmds.connectAttr(b + '.rotate', rotBC + '.color1', force = True) cmds.connectAttr(b + '.translate', tranBC + '.color1', force = True) cmds.connectAttr(b + '.scale', scaleBC + '.color1', force = True) # connects FK joints to the blend colors cmds.connectAttr(c + '.rotate', rotBC + '.color2') cmds.connectAttr(c + '.translate', tranBC + '.color2') cmds.connectAttr(c + '.scale', scaleBC + '.color2') # connects blend colors to bind joints cmds.connectAttr(rotBC + '.output', a + '.rotate') cmds.connectAttr(tranBC + '.output', a + '.translate') cmds.connectAttr(scaleBC + '.output', a + '.scale') ------------------- def execCrBC(self, *args): g.crBC(cmds.textField(self.ikJBC, q = True, tx = True), cmds.textField(self.fkJBC, q = True, tx = True), cmds.textField(self.bindJBC, q = True, tx = True), cmds.intField(self.bQBC, q = True, v = True), cmds.textField(self.sCBC, q = True, tx = True)) ------------------- self.bQBC = cmds.intField() cmds.text(l = '') self.sCBC = cmds.textField() cmds.text(l = '') cmds.button(l = 'Help Docs', c = self.crBC.__doc__) cmds.setParent('..') cmds.button(l = 'Create', c = self.execCrBC) Here is the code causing the problem as requested: import maya.cmds as cmds import jtRigUI.createDummyRig as dum import jtRigUI.createSkeleton as sk import jtRigUI.generalUtilities as gu import jtRigUI.createLegRig as lr import jtRigUI.createArmRig as ar class RUI(dum.Dict, dum.Dummy, sk.Skel, sk.FiSkel, lr.LeanLocs, lr.LegRig, ar.ArmRig, gu.Gutils): def __init__(self, charNameUI, gScaleUI, fingButtonGrp, thumbCheckBox, spineButtonGrp, neckButtonGrp, ikJBC, fkJBC, bindJBC, bQBC, sCBC): rigUI = 'rigUI' if cmds.window(rigUI, exists = True): cmds.deleteUI(rigUI) rigUI = cmds.window(rigUI, t = 'JT Rigging UI', sizeable = False, tb = True, mnb = False, mxb = False, menuBar = True, tlb = True, nm = 5) form = cmds.formLayout() tabs = cmds.tabLayout(innerMarginWidth = 1, innerMarginHeight = 1) rigUIMenu = cmds.menu('Help', hm = True) aboutMenu = cmds.menuItem('about') cmds.popupMenu('about', button = 1) deleteUIMenu = cmds.menu('Delete', hm = True) cmds.menuItem('dummySkeleton') cmds.formLayout(form, edit = True, attachForm = ((tabs, 'top', 0), (tabs, 'left', 0), (tabs, 'bottom', 0), (tabs, 'right', 0)), w = 30) tab1 = cmds.rowColumnLayout('Dummy') #cmds.columnLayout(rowSpacing = 10) #cmds.setParent('..') cmds.frameLayout(l = 'A: Dummy Skeleton Setup', w = 400) self.charNameUI = cmds.textFieldGrp (label="Optional Character Name:", ann="Insert a name for the character or leave empty.", tx = '', w = 1) fingJUI = cmds.frameLayout(l = 'B: Number of Fingers', w = 10) cmds.text('\n', h = 5) self.fingButtonGrp = cmds.radioButtonGrp('fingRadio', p = fingJUI, l = 'Fingers: ', sl = 4, w = 1, numberOfRadioButtons = 4, labelArray4 = ['One', 'Two', 'Three', 'Four'], ct2 = ('left', 'left'), cw5 = [60,60,60,60,60]) self.thumbCheckBox = cmds.checkBoxGrp(l = 'Thumb: ', v1 = True) cmds.text('\n', h = 5) spineJUI = cmds.frameLayout(l = 'C: Number of Spine Joints') cmds.text('\n', h = 5) self.spineButtonGrp = cmds.radioButtonGrp('spineRadio', p = spineJUI, l = 'Spine Joints: ', sl = 2, w = 1, numberOfRadioButtons = 3, labelArray3 = ['Three', 'Five', 'Ten'], ct2 = ('left', 'left'), cw4 = [95,95,95,95]) cmds.text('\n', h = 5) neckJUI = cmds.frameLayout(l = 'D: Number of Neck Joints') cmds.text('\n', h = 5) self.neckButtonGrp = cmds.radioButtonGrp('neckRadio', p = neckJUI, l = 'Neck Joints: ', sl = 0, w = 1, numberOfRadioButtons = 3, labelArray3 = ['Two', 'Three', 'Four'], ct2 = ('left', 'left'), cw4 = [95,95,95,95]) cmds.text('\n', h = 5) cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') cmds.frameLayout('E: Creation') cmds.text('SAVE FIRST: CAN NOT UNDO', bgc = (0.2,0.2,0.2)) cmds.button(l = '\nCreate Dummy Skeleton\n', c = self.build) # also have it make char name field grey cmds.text('Elbows and Knees must have bend.', bgc = (0.2,0.2,0.2)) cmds.columnLayout() cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') tab2 = cmds.rowColumnLayout('Skeleton') cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'A: Skeleton Setup') cmds.text('SAVE FIRST: CAN NOT UNDO', bgc = (0.2,0.2,0.2)) cmds.button(l = '\nConvert to Skeleton - Orient - Set LRA\n', c = self.buildSkel) self.gScaleUI = cmds.textFieldGrp (label="Scale Multiplier:", ann="Scale multipler of Character: basis for all further base controllers", tx = '1.0', w = 1, ed = False, en = False, visible = True) cmds.frameLayout('B: Manual Orientation') cmds.text('You must manually check finger, thumb, leg, foot orientation specifically.\nConfirm rest of joints.\nSpine: X aim, Y point backwards from spine, Z to the side.\nFingers: X is aim, Y points upwards, Z to the side - Spread on Y, curl on Z.\nFoot: Pivots on Y, rolls on Z, leans on X.') cmds.columnLayout() cmds.setParent('..') cmds.frameLayout('C: Finalize Creation of Skeleton') cmds.button(l = '\nFinalize Skeleton\n', c = self.finishS) cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') tab3 = cmds.rowColumnLayout('Legs') cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'A: Leg Rig Setup') cmds.button(l = '\nGenerate Foot Lean Locators\n', c = self.makeLean) cmds.text('Place on either side of the foot.\nDo not rotate: Automatic orientation in place.') cmds.frameLayout(l = 'B: Rig Legs') cmds.button(l = '\nRig Legs\n', c = self.makeLegs) cmds.setParent('..') cmds.setParent('..') cmds.setParent('..') tab4 = cmds.rowColumnLayout('Arms') cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'A: Arm Rig Setup') cmds.button(l = '\nA: Rig Arms\n', c = self.makeArms) cmds.setParent('..') cmds.setParent('..') tab5 = cmds.rowColumnLayout('Spine and Head') cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'Spine Rig Setup') cmds.setParent('..') cmds.setParent('..') tab6 = cmds.rowColumnLayout('Stretchy IK') cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'Stretchy Setup') cmds.setParent('..') cmds.setParent('..') tab6 = cmds.rowColumnLayout('Extras') cmds.scrollLayout(saw = 600, sah = 600, cr = True) cmds.columnLayout(columnAttach = ('both', 5), rowSpacing = 10, columnWidth = 150) cmds.setParent('..') cmds.frameLayout(l = 'General Utitlities') cmds.text('\nHere are all my general utilities for various things') cmds.frameLayout(l = 'Automatic Blend Colors Creation and Connection') cmds.rowColumnLayout(nc = 5, w = 10) cmds.text('IK Joint:') cmds.text(l = '') cmds.text('FK/Dyn Joint:') cmds.text(l = '') cmds.text('Bind Joint:') self.ikJBC = cmds.textField() cmds.text(l = '') self.fkJBC = cmds.textField() cmds.text(l = '') self.bindJBC = cmds.textField() cmds.text(' \nBlend Quantity:') cmds.text(l = '') cmds.text(' \nSwitch Control:') cmds.text(l = '') cmds.text(l = '') self.bQBC = cmds.intField() cmds.text(l = '') self.sCBC = cmds.textField() cmds.text(l = '') cmds.button(l = 'Help Docs', c = self.crBC.__doc__) cmds.setParent('..') cmds.button(l = 'Create', c = self.execCrBC) cmds.text(l = '') cmds.setParent('..') cmds.frameLayout(l = 'Make Spline IK Curve Stretch And Squash') cmds.rowColumnLayout(nc = 5, w = 10) cmds.text('Curve Name:') cmds.text(l = '') cmds.text('Setup Name:') cmds.text(l = '') cmds.text('Joint Quantity:') self.ikJBC = cmds.textField() cmds.text(l = '') self.fkJBC = cmds.textField() cmds.text(l = '') self.bindJBC = cmds.textField() cmds.text(' \nSwitch Control:') cmds.text(l = '') cmds.text(' \nGlobal Control:') cmds.text(l = '') cmds.text(l = '') self.bQBC = cmds.intField() cmds.text(l = '') self.sCBC = cmds.textField() cmds.text(l = '') cmds.button(l = 'Help Docs', c = self.crBC.__doc__) cmds.setParent('..') cmds.button(l = 'Create', c = self.execCrBC) cmds.setParent('..') cmds.showWindow(rigUI) r = RUI('charNameUI', 'gScaleUI', 'fingButtonGrp', 'thumbCheckBox', 'spineButtonGrp', 'neckButtonGrp', 'ikJBC', 'fkJBC', 'bindJBC', 'bQBC', 'sCBC') # last modified at 6.20 pm 29th June 2011

    Read the article

1