Search Results

Search found 398 results on 16 pages for 'rubber band'.

Page 1/16 | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• Get the wireless adapter frequency-band mode in Windows 7

  - by Petr

  I have a dual-band 802.11n router operating in both frequency bands with the same SSID. My Windows 7 laptop has a dual-band wireless adapter. Is there a way to find out which frequency band is the one currently used by the client? Also, is there a way to set the preffered band? Thanks. EDIT1: The router is Linksys E4200 (V2) and I essentially want to keep the 2.4GHz band in the mixed-mode so that the legacy 802.11g devices can connect while allocating the 5.0GHz band for 802.11n devices. The laptop's adapter (Intel Centrino Ultimate-N 6300 ANG) can operate in both 802.11n modes. EDIT2: Related topic

  Read the article

• Is a rubber keyboard suitable for heavy use?

  - by Vilx-

  Every keyboard wears out with time, and mine has some age already. The day it fails is coming closer and closer. So I'm slowly starting to look around for a new one. I use the keyboard for gaming and programming, so it gets some pretty solid use. I also tend to eat by the computer, so there's plenty of... uhh... lifeforms down there. Anyway, I was looking at these rubber keyboards. They come pretty cheap (my local computer shop has one for less than $20) and they seem to have some nice properties. They can be easily cleaned, they're quiet, and can be rolled up when needed (plus no worries about spilled drinks). However I'm wondering what their type-ability is. If I can't write on it at a decent speed, the rest of the features don't matter. Not that I'm a fast typer, but being a professional progammer does give a boost to the skill. I couldn't find any reviews on the net so I'm turning to you. Who has used these keyboards and what was your experience? Perhaps there is something else I haven't though of why such a keyboard would not be a good idea?

  Read the article

• socket programming: How do I handle out of band data

  - by soulmerge

  I just looked into wikipedia's entry on out-of-band data and as far as I understand, OOB data is somehow flagged more important and treated as ordinary data, but transmitted in a seperate stream, which profoundly confuses me. The actual question would be (besides "Could someone explain what OOB data is?"): I'm writing a unix application that uses sockets and need to make use of select() and was wondering what to do with the exceptfds parameter? Do I need to put all my sockets into this parameter and react to such events? Or do I just ignore them?

  Read the article

• Why are there so few Wireless N Dual Band adapter PCI cards, only USB adapters instead?

  - by daiphoenix

  There has been several Wireless N Dual Band routers/APs out in the market for quite some time now, and there are several Wireless N Dual Band USB adapters out there. But as for PCI/PCI-X card adapters, there seems to be only one (the Linksys WMP600N). Why is that? I find it very strange. Is it because the USB adapters are easier to install, and can be used on multiple computers? But if so, why isn't it the same case with single band (2.4 Ghz) wireless N adapters? Because for these ones there as many PCI card adapters as there are USB adapters. Also, can the USB adapters, despite the lack of external antenna, offer the same level of performance as a card with external antennas?

  Read the article

• Simulate 'Shock absorbtion' with tire rubber in PhysX (2.8.x)

  - by Mungoid

  This is a kinda tricky question and I fear there is no easy enough solution, but I figured I'd hit SE up before giving up on it and just doing what I can. A machine I am working on has no suspension or shocks or springs of any sort in the real machine, so you would think that when it drives over bumps, it would shake like crazy but because its tires (6 of them) are quite large they seem to absorb a lot of shock from the bumps. Part of this is because the machine is around 30k lbs and it just smashes/compresses any bumps in the ground down (This is another issue im still working on) and the other part is that the tires seem to have a lot of flex to them with a lot of air as well. So my current task is to simulate shock absorption in physx without visibly separating the tires from the spindle/axle.. I have been messing with all kinds of NxMaterial, NxSpring, Joints, etc. and have had no luck getting this to work. The main problem is that the spindle attached to the tire is directly in the center and the axle is basically solidly attached to the chassis, so if i give it any spring or suspension travel, that spindle on the tires will move upwards or downwards, looking very odd because now its not any longer in the center of the tire. I tried giving it a higher restitution but that just makes it bouncy without any shock absorption. Another avenue I am messing with is to actively smooth the terrain in front of the tires so that before it hits a bumpy patch, that patch is smoothed and it doesn't bounce. The only issue with this is that it is pretty expensive to do with 6 tires, high tesselation of the terrain and other complex things going on at the same time in this simulation. I am still working on this but I am hoping to mix and match a few different aspects to get the best possible outcome. This is a bit of a complex issue so I'm not expecting anyone to have a definitive answer, just hoping someone may think of something I haven't =-) -Side note: Yes i know PhysX 2.8.x is quite outdated but we have to stick with it for this implementation. We are in the process of going to another physics engine but it is out of scope to apply that engine to this project.

  Read the article

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

• OSU Marching Band Delivers Impressive Half-Time Tribute to Video Games

  - by Jason Fitzpatrick

  This Saturday, during the Ohio State-Nebraska game halftime, the Ohio State University marching band paid tribute to decades of popular video games in an impressively choreographed 10 minute show. The video starts off a little shaky, but once the crowd settles down to watch the show things get significantly smoother. How many of the games do you recognize? [via Reddit] 7 Ways To Free Up Hard Disk Space On Windows HTG Explains: How System Restore Works in Windows HTG Explains: How Antivirus Software Works

  Read the article

• Microsoft Issues Out-of-Band Internet Explorer Security Patch

  Microsoft fixes a gaping security hole in Internet Explorer 6 and 7, plus tosses in fixes for nine other critical security flaws in the same out-of-band patch.

  Read the article

• Intel Dual Band Wireless-AC 7260 keeps dropping wifi

  - by Rick T

  My wifi Intel Dual Band Wireless-AC 7260 keeps dropping wificonnection drops and the network to which I was connected disappears from the list of available networks in network manager. The only way to fix it is to disable wifi and re-enable it How can I fix this. I'm using ubuntu 14.04 64bit. It mostly drops connections on the 5ghz network. My other devices don't drop connections over wifi. see logs and versions rt@simon:~$ uname -a Linux simon 3.13.0-34-generic #60-Ubuntu SMP Wed Aug 13 15:45:27 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux rt@simon:~$ rt@simon:~$ dmesg | grep iwl [ 3.370777] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [ 3.381089] iwlwifi 0000:03:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm [ 3.414637] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 3.414695] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.414913] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S rt@simon:~$ cat /var/log/syslog | grep -e iwl -e 80211 | tail -n25 Aug 14 08:13:02 simon kernel: [ 3.452780] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:13:02 simon kernel: [ 3.630208] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Aug 14 08:13:06 simon NetworkManager[1125]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.2/0000:03:00.0/ieee80211/phy0/rfkill1) (driver iwlwifi) Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): using nl80211 for WiFi device control Aug 14 08:13:06 simon NetworkManager[1125]: <info> (wlan0): new 802.11 WiFi device (driver: 'iwlwifi' ifindex: 3) Aug 14 08:13:06 simon kernel: [ 9.304838] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:13:06 simon kernel: [ 9.305068] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:14:18 simon kernel: [ 81.230162] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:14:18 simon kernel: [ 81.232330] cfg80211: World regulatory domain updated: Aug 14 08:14:18 simon kernel: [ 81.232332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:14:18 simon kernel: [ 81.232333] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232334] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232335] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:14:18 simon kernel: [ 81.232337] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:02 simon kernel: [ 605.483174] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:02 simon kernel: [ 605.483396] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S Aug 14 08:23:18 simon kernel: [ 621.223905] cfg80211: Calling CRDA to update world regulatory domain Aug 14 08:23:18 simon kernel: [ 621.228945] cfg80211: World regulatory domain updated: Aug 14 08:23:18 simon kernel: [ 621.228950] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Aug 14 08:23:18 simon kernel: [ 621.228954] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228956] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228959] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228961] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Aug 14 08:23:18 simon kernel: [ 621.228963] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

  Read the article

• No more internet connection after update in 14.04 with Intel Dual Band Wireless AC 7260

  - by luis

  My Dell XPS 15 (haswell) was working fine until I stupidly accepted recently to apply Ubuntu updates. Since then, my wifi does not work (it shows "device not managed" when clicking wifi icon in toolbar). Even USB to Ethernet adapter does not seem to work. Bluetooth at least "sees" other bluetooth devices around... See below output from dmesg (dmesg |grep iwl) : [ 886.462459] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 886.462561] iwlwifi 0000:06:00.0: Direct firmware load failed with error -2 [ 886.462562] iwlwifi 0000:06:00.0: Falling back to user helper [ 886.463284] iwlwifi 0000:06:00.0: loaded firmware version 22.1.7.0 op_mode iwlmvm [ 886.475345] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 886.475433] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.475684] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 886.689214] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' Below the output from modinfo iwlwifi: filename: /lib/modules/3.13.0-29- generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko license: GPL author: Copyright(c) 2003-2013 Intel Corporation <[email protected]> version: in-tree: description: Intel(R) Wireless WiFi driver for Linux firmware: iwlwifi-100-5.ucode firmware: iwlwifi-1000-5.ucode firmware: iwlwifi-135-6.ucode firmware: iwlwifi-105-6.ucode firmware: iwlwifi-2030-6.ucode firmware: iwlwifi-2000-6.ucode firmware: iwlwifi-5150-2.ucode firmware: iwlwifi-5000-5.ucode firmware: iwlwifi-6000g2b-6.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6050-5.ucode firmware: iwlwifi-6000-4.ucode firmware: iwlwifi-3160-7.ucode firmware: iwlwifi-7260-7.ucode srcversion: 1E6912E109D5A43B310FB34 alias: pci:v00008086d0000095Asv*sd00005490bc*sc*i* (a pack of lines of kind "alias: pci:xxxxx...." that I guess are not helpful) alias: pci:v00008086d0000095Bsv*sd00005290bc*sc*i* depends: cfg80211 intree: Y vermagic: 3.13.0-29-generic SMP mod_unload modversions signer: Magrathea: Glacier signing key sig_key: 66:02:CB:36:F1:31:3B:EA:01:C4:BD:A9:65:67:CF:A7:23:C9:70:D8 sig_hashalgo: sha512 parm: swcrypto:using crypto in software (default 0 [hardware]) (int) parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint) parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int) parm: fw_restart:restart firmware in case of error (default true) (bool) parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int) parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable, 2=enable (default: 0) (int) parm: nvm_file:NVM file name (charp) parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool) parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int) parm: power_save:enable WiFi power management (default: disable) (bool) parm: power_level:default power save level (range from 1 - 5, default: 1) (int) I downloaded the latest versions of iwlwifi firmware from git (git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git; copy iwlwifi-3160-9.ucode iwlwifi-7260-9.ucode iwlwifi-7265-9.ucode to /lib/firmware and reboot) but as you can imagine it did not help. Update #1: Downloaded from http://wireless.kernel.org/en/users/Drivers/iwlwifi?action=AttachFile&do=get&target=iwlwifi-7260-ucode-22.15.8.0.tgz and copied the file into /lib/firmware. After reloading it with modprobe, it seems to be OK: [ 14.761283] iwlwifi 0000:06:00.0: enabling device (0000 -> 0002) [ 14.761472] iwlwifi 0000:06:00.0: irq 51 for MSI/MSI-X [ 14.772478] iwlwifi 0000:06:00.0: loaded firmware version 22.15.8.0 op_mode iwlmvm [ 14.800274] iwlwifi 0000:06:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144 [ 14.800349] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 14.800657] iwlwifi 0000:06:00.0: L1 Enabled; Disabling L0S [ 15.007048] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs' However, clicking in wifi in the toolbar still shows "device not managed". Any clues? Many thanks! Luis

  Read the article

• Internet Explorer Cumulative Update Releasing Out-of-Band

  This is an advance notification of an out-of-band security bulletin that Microsoft is intending to release on March 30, 2010. The bulletin is being released to address attacks against customers of Internet Explorer 6 and Internet Explorer 7. Users of Internet Explorer 8 and Windows 7 are not vulnerable to these attacks. The vulnerability used in these attacks, along with workarounds, is described in Microsoft Security Advisory 981374....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Get Members of Band

  - by user168083

  If I look at the Freebase page for the band '311', I see Chad Sexton listed. http://www.freebase.com/view/en/311 I am trying to query for the members of a band : { "name" : "311", "/music/artist/album" : [{"name":null, "id":null, "optional": true}], "type|=" : ["/music/artist","/music/musical_group"], "/award/award_winner/awards_won" : ["award":null, "optional" => true], "/award/award_nominated_work/award_nominations" : ["award":null, "optional" => true], "/music/artist/supporting_artists":[{}] } I thought supporting_artists would return the band member names, but the array is always empty. But if I query for all properties related to Chad Sexton, I don't see 311 mentioned. But he is listed as member on the Freebase web info page (which is correct). { "*": null, "name": "Chad Sexton", "type": "/music/artist" } How can I grab the band member names along with the band info?

  Read the article

• Microsoft SharePoint Conference 2011: Which Band Should Perform?

  As you all know the SharePoint Conference last year in Las Vegas was a great show (here are links to broadcasts of several of our sessions). I followed the show with a ticket to see U2s 360 concert (unlike any other spectacle in rock-and-roll). Since then, Ive often been asked, Is there going to be another SPC in 2010?. The answer is: The next one is October 3-6, 2011 in Anaheim, California. The weather in Cali is truly unbeatable, and the conference is sure to be another smash with great content...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• multiple detail band in jasper report

  - by BlackPanther

  Hi I want to show multiple detail section in my jasper report.How to add multiple detail bands in jasper.For details band I am passing collection from my java class.So if I have multiple detail band how to pass the different collections to different detail band. Can some one provide help on this

  Read the article

• How to increase detail band height dynamically

  - by Chandu

  Hi All, I am using ireport. My requirement is to increase the detail band height dynamically when the text field has more data , are there any settings to increase to it? I am using one textfield in the detail band when it has more information(words), it is displaying only some information.i.e the words are being cut off. Depending on the detail band height the words are displaying.I would like to increase the band hieght dynamically when the text field has more data. Please advice me on this regard. Regards, Chandu

  Read the article

• How to change the band height dynamically?

  - by Kumar

  Is it possible to modify the height of detail band dynamically in jasper report? Because in my application i need to create pdf document.I have used one main document inside detail band of that main document i used one subreport. Sub report will take java bean as data source. This java bean return a list of field. So if we fixed the size of band then some time all values are not stretch in the document. Is it possible to change the detail band dynamically.

  Read the article

• Drawing rubber band line during user drag

  - by Pete W

  In my iPhone app, I would like the user to be able to "connect" two of my views by: 1) starting a drag in View A 2) as they drag towards View B, a straight line with one end in View A and the other end under at the current drag point, animates in a rubber-band fashion 3) when/if they release in View B, the line is then shown between the two views I've seen examples of dragging and dropping views, and other examples of animations, but I haven't seen one that is a simple example of this kind of user-directed animation. Any pointers towards examples or the specific docs I should be looking at would be appreciated. If this turns out to be trivial - my apologies. Although I've done quite a bit of development, I'm just getting started in the iPhone SDK and Core Graphics.

  Read the article

• Broad Band LAN connection through existing 6 wire phone line ( no phone connected )

  - by Paul Taylor

  I have an (up to but never achieved ) 10 mb broadband signal coming into my house along the telephone line. The modem then connects the broadband signal via a LAN connection and Wi-Fi signal to my computers and iPad. My workshop desk is 54 yards (approx. 50m) downhill from the modem (part of a separate building) – too far to give a good direct signal. The inside corner of the workshop (by a window) receives a weak signal. I have a disconnected telephone cable consisting of 6 wires going from the house to the workshop. The telephone is no longer used in the workshop - we use our mobile number for business calls. A broad band signal using the cable would not have to share with a phone. What would be the most economic price/efficient way to get the broadband signal to the workshop? I am writing in hope that since the telephone didn't need the six wires, an Ethernet connection might be similar and not need all the eight wires for a LAN connection. In theory could use the telephone wire to pull an Ethernet cable trough the underground pipe but I doubt if the cable would survive the strain. The broad band connection in the workshop does not have to have network facility. My skill level is high enough to do house wiring, plumbing and gas fitting; so given any sound advice and a wiring diagram or instructions I can probably work out the rest myself.

  Read the article

• Best dual band A/B/G/N wireless router/ap for Linux

  - by Kevin Bowling

  Hello, I am looking for the best A/B/G/N dual band (simultaneous) router or access point that can be flashed with community firmware like dd-wrt or openwrt. In the past I have used the WRT54G series from Linksys with great success as access points and bridges. The WRT610N looks nice but I'm not sure how well the community firmwares support it. I am open to any manufacturer and any input or experience would be appreciated.

  Read the article

• How do I install rubber pins onto a case fan?

  - by Resorath

  I have the following rubber pins with my new case fan: I'm not sure how to install these. They are obvious to install into the case, the rubber pulls easily into the screw hole and stays in place, however the fan they came with they do not seem to fit in the screw holes at all. I put the thin side into the fan and pulled so hard that it actually snapped the rubber, so obviously that is not the correct method. How do you install these rubber pins into stubborn fans of which they were designed for?

  Read the article

• Detect start of a new band

  - by Dave Jarvis

  Using iReport, how do you set a variable (could be a parameter, or a value in the REPORT_PARAMETERS_MAP) to Boolean.TRUE at the start of a new band? There are some fields in the header that should only be displayed after a specific band has started being filled. Thank you!

  Read the article

• Web pages show empty band across the top

  - by Gerry

  In Chrome, site http://www.helpinghandspeople.com has a 16px empty band (background colour shows) across the top of the page. It's not supposed to be there, but I can't figure out how to make it go away. In Firefox, the home page shows fine, but login and a few other pages show a 24px band. Viewing source and running inspect element are not helpful. Does anyone have a suggestion where to look? Thanks Gerry

  Read the article

• What is the best algorithm for solving a band-diagonal matrix?

  - by Goose Bumper

  I'm trying to figure out the best way to solve a pentadiagonal matrix. Is there something faster than gaussian elimination?

  Read the article

• Ideas for band site, which technology to use?

  - by brux

  I am attempting to design and build a website for my friends band. There is minimal content to be included such as bio,news,enbemdded Audio/Visual material. My web dev expertise is average. I'm basicaly looking for inspiration, I was edging towards embedding a silverlight deepzoom xap object to add some visual stimulation, perhaps by featuring a high res photo of the bandshardware/equipment which zooms when mouseover occurs. Does anyone have any cool ideas for a central feature for this site, and which way to approact it in terms of technique (js,css,silverlight etc) If anyone has any immediate ideas which they think would be cool then I am eager to hear them! Also if anyone can link me to any cool band sites they have come across recently I would be greatful,nothing too complicated though please I will be doing all the work myself. Im want the site to be simple but have a certain wow factor!

  Read the article

• 5GHz vs 2.4GHz dual band router, max mbps

  - by Tallboy

  I've done a fair amount of reading before posting this but there are a few things still unclear. I just bought a Netgear WNDR3700 N600. I understand that 5GHz offers more channels, less interference because of more available channels, wont interfere with a microwave and so on, and also has a shorter range. Currently, my router is broadcasting both signals (for my iPhone on 2.4, and my computer on 5) But my question is What is the max speed of 5GHz in mbps? In the router settings, it allows me to set '300mbps', but I keep reading online that the max is 54. Is this true? I noticed when I set up the router the default for 2.4 was set to 300 and the default for 5 was set to 54, so I changed both to 300. Is this fine as well? I don't see why it wouldn't be maxed out for both by default. On the box it says max rate of 300+300 so I assume this is correct, but it's throttled down so the router isn't stressing in case you have something streaming media 24/7 and slowing the internet down too. What is the max range of 5GHz? my apt is 780 square feet, and the router is in the main living room.

  Read the article

1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >