Search Results

Search found 93 results on 4 pages for 'tj mott'.

Page 1/4 | 1 2 3 4  | Next Page >

• Disabling Laptop (PB TJ-75) faulty card reader Linux

  - by Gab

  My problem comes from that my laptop [PB TJ-75] has a faulty Alcor card reader. It’s 100% sure, the device is dead and unusable whatever the OS is. It cannot be disabled in BIOS [latest: Vendor: Phoenix Technologies LTD Version: V1.26 Release Date: 05/04/2010]. If I could take it apart from the main board easily, and if with that, the system would never look again for it, I’ll be very happy! Is it possible, has anyone ever tried this? Or maybe, replacing the BIOS with a more open one, which let you disable the card reader. Does this exists? Here's what I've tried to disable it so far. In Win7, I choose ‘disable’ in device manager and that’s ok. If not, the device keeps on appearing and disappearing and lot of resources are used. In Lubuntu 13.04, I got extra boot time, with the msg:'sdb, assuming drive cache, etc.’ I tried other distros (isos booted by grub). I can boot Puppy, Gparted, and Redobackup apparently without any problem. I cannot boot Debian, live or install + tried Crunchbang and Tails. I got a loop :’usb device, scsi n+1 blabla‘. I tried "nousb", no result, I have blacklisted EHCI, no result, then usb_storage module, better boot time in Lubuntu, with just the message "...data transfer failed", better shutdown time too. But, no way to use usb storage medias. In Debian, it ends with BusyBox prompt. Is it possible to just disable that Alcor card reader? Does it have a specific module? Is there a special kernel boot option that I missed? Does it have something to do with kernel recompiling, and if yes, how to do with isos? Programming a driver which says everything is ok (out of my comprehension for the moment)? Disabling device by vendor id? What is the best way?

  Read the article

• In listview,Viewstub cannot be found after the previous one is inflate

  - by user2958132

  I am using some list item layout and in the item layout, there is a Viewstub where I want to put some image in.I don't have the source of list item layout and just know there are some TextViews and ViewStubs in it. My purpose is to find the ViewStub first and set my personal layout and play with it. However, some of the ViewStub cannot be found. public class TJAdapter extends CursorAdapter { .... public void bindView(View view, Context context, Cursor cursor) { ViewStub contentstub = (ViewStub)item.findViewById(R.id.content_stub); if (contentstub == null){ LOG.error("TJ,contentstub is null"); } else { LOG.error("TJ,contentstub is not null"); contentstub.setLayoutResource(R.layout.icon_image); View iconImage = contentstub.inflate(); } .... } public View newView(Context context, Cursor cursor, ViewGroup parent) { final View view = mInflater.inflate(R.layout.list_item, parent, false); bindView(view, context, cursor); } And the log output is like this: TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is not null TJ,bindView is called TJ,contentstub is null TJ,bindView is called TJ,contentstub is not null I spent a lot of time on it and have no idea why this happens. Can some body help?

  Read the article

• Some optimization about the code (computing ranks of a vector)?

  - by user1748356

  The following code is a function (performance-critical) to compute tied ranks of a vector: mergeSort(x,inds,ci); //a sort function to sort vector x of length ci, also returns keys (inds) of x. int tj=0; double xi=x[0]; for (int j = 1; j < ci; ++j) { if (x[j] > xi) { double rankvalue = 0.5 * (j - 1 + tj); for (int k = tj; k < j; ++k) { ranks[inds[k]]=rankvalue; }; tj = j; xi = x[j]; }; }; double rankvalue = 0.5 * (ci - 1 + tj); for (int k = tj; k < ci; ++k) { ranks[inds[k]]=rankvalue; }; The problem is, the supposed performance bottleneck mergeSort(), which is O(NlogN) is several times faster than the other part of codes (which is O(N)), which suggests there is room for huge improvment with the other part of the codes, any advices?

  Read the article

• 9o9 98 6y jetj ety jetjte j [closed]

  - by mandnd

  8oo o o9o tj jy jey

  Read the article

• BizTalk Cross Reference Data Management Strategy

  - by charlie.mott

  Article Source: http://geekswithblogs.net/charliemott This article describes an approach to the management of cross reference data for BizTalk.  Some articles about the BizTalk Cross Referencing features can be found here: http://home.comcast.net/~sdwoodgate/xrefseed.zip http://geekswithblogs.net/michaelstephenson/archive/2006/12/24/101995.aspx http://geekswithblogs.net/charliemott/archive/2009/04/20/value-vs.id-cross-referencing-in-biztalk.aspx Options Current options to managing this data include: Maintaining xml files in the format that can be used by the out-of-the-box BTSXRefImport.exe utility. Use of user interfaces that have been developed to manage this data: BizTalk Cross Referencing Tool XRef XML Creation Tool However, there are the following issues with the above options: The 'BizTalk Cross Referencing Tool' requires a separate database to manage.  The 'XRef XML Creation' tool has no means of persisting the data settings. The 'BizTalk Cross Referencing tool' generates integers in the common id field. I prefer to use a string (e.g. acme.country.uk). This is more readable. (see naming conventions below). Both UI tools continue to use BTSXRefImport.exe.  This utility replaces all xref data. This can be a problem in continuous integration environments that support multiple clients or BizTalk target instances.  If you upload the data for one client it would destroy the data for another client.  Yet in TFS where builds run concurrently, this would break unit tests. Alternative Approach In response to these issues, I instead use simple SQL scripts to directly populate the BizTalkMgmtDb xref tables combined with a data namepacing strategy to isolate client data. Naming Conventions All data keys use namespace prefixing.  The pattern will be <companyName>.<data Type>.  The naming conventions will be to use lower casing for all items.  The data must follow this pattern to isolate it from other company cross-reference data.  The table below shows some sample data. (Note: this data uses the 'ID' cross-reference tables.  the same principles apply for the 'value' cross-referencing tables). Table.Field Description Sample Data xref_AppType.appType Application Types acme.erp acme.portal acme.assetmanagement xref_AppInstance.appInstance Application Instances (each will have a corresponding application type). acme.dynamics.ax acme.dynamics.crm acme.sharepoint acme.maximo xref_IDXRef.idXRef Holds the cross reference data types. acme.taxcode acme.country xref_IDXRefData.CommonID Holds each cross reference type value used by the canonical schemas. acme.vatcode.exmpt acme.vatcode.std acme.country.usa acme.country.uk xref_IDXRefData.AppID This holds the value for each application instance and each xref type. GBP USD SQL Scripts The data to be stored in the BizTalkMgmtDb xref tables will be managed by SQL scripts stored in a database project in the visual studio solution. File(s) Description Build.cmd A sqlcmd script to deploy data by running the SQL scripts below.  (This can be run as part of the MSBuild process).   acme.purgexref.sql SQL script to clear acme.* data from the xref tables.  As such, this will not impact data for any other company. acme.applicationInstances.sql   SQL script to insert application type and application instance data.   acme.vatcode.sql acme.country.sql etc ...  There will be a separate SQL script to insert each cross-reference data type and application specific values for these types.

  Read the article

• Creating typed WSDL’s for generic WCF services of the ESB Toolkit

  - by charlie.mott

  source: http://geekswithblogs.net/charliemott Question How do you make it easy for client systems to consume the generic WCF services exposed by the ESB Toolkit using messages that conform to agreed schemas\contracts?  Usually the developer of a system consuming a web service adds a service reference using a WSDL. However, the WSDL’s for the generic services exposed by the ESB Toolkit do not make it easy to develop clients that conform to agreed schemas\contracts. Recommendation Take a copy of the generic WSDL’s and modify it to use the proper contracts. This is very easy.  It will work with the generic on ramps so long as the <part>?</part> wrapping is removed from the WCF adapter configuration in the BizTalk receive locations.  Attempting to create a WSDL where the input and output messages are sent/returned with a <part> wrapper is a nightmare.  I have not managed it.  Consequences I can only see the following consequences of removing the <part> wrapper: ESB Test Client – I needed to modify the out-of-the-box ESB Test Client source code to make it send non-wrapped messages.  Flat file formatted messages – the endpoint will no longer support flat file message formats.  However, even if you needed to support this integration pattern through WCF, you would most-likely want to create a separate receive location anyway with its’ own independently configured XML disassembler pipeline component. Instructions These steps show how to implement a request-response implementation of this. WCF Receive Locations In BizTalk, for the WCF receive location for the ESB on-ramp, set the adapter Message settings\bindings to “UseBodyPath”: Inbound BizTalk message body  = Body Outbound WCF message body = Body Create a WSDL’s for each supported integration use-case Save a copy of the WSDL for the WCF generic receive location above that you intend the client system to use. Give it a name that mirrors the interface agreement (e.g. Esb_SuppliersSearchCommand_wsHttpBinding.wsdl).   Add any xsd schemas files imported below to this same folder.   Edit the WSDL to import schemas For example, this: <xsd:schema targetNamespace=http://microsoft.practices.esb/Imports /> … would become something like: <xsd:schema targetNamespace="http://microsoft.practices.esb/Imports">     <xsd:import schemaLocation="SupplierSearchCommand_V1.xsd"                            namespace="http://schemas.acme.co.uk/suppliersearchcommand/1.0"/>     <xsd:import  schemaLocation="SuppliersDocument_V1.xsd"                              namespace="http://schemas.acme.co.uk/suppliersdocument/1.0"/>     <xsd:import schemaLocation="Types\Supplier_V1.xsd"                              namespace="http://schemas.acme.co.uk/types/supplier/1.0"/>     <xsd:import  schemaLocation="GovTalk\bs7666-v2-0.xsd"                               namespace="http://www.govtalk.gov.uk/people/bs7666"/>     <xsd:import  schemaLocation="GovTalk\CommonSimpleTypes-v1-3.xsd"                             namespace="http://www.govtalk.gov.uk/core"/>     <xsd:import  schemaLocation="GovTalk\AddressTypes-v2-0.xsd"                              namespace="http://www.govtalk.gov.uk/people/AddressAndPersonalDetails"/> </xsd:schema> Modify the Input and Output message For example, this: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part" type="xsd:anyType"/> </wsdl:message> … would become something like: <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_InputMessage">   <wsdl:part name="part"                       element="ssc:SupplierSearchEvent"                         xmlns:ssc="http://schemas.acme.co.uk/suppliersearchcommand/1.0" /> </wsdl:message> <wsdl:message name="ProcessRequestResponse_SubmitRequestResponse_OutputMessage">   <wsdl:part name="part"                       element="sd:SuppliersDocument"                       xmlns:sd="http://schemas.acme.co.uk/suppliersdocument/1.0"/> </wsdl:message> This WSDL can now be added as a service reference in client solutions.

  Read the article

• What label of tests are BizUnit tests?

  - by charlie.mott

  BizUnit is defined as a "Framework for Automated Testing of Distributed Systems.  However, I've never seen a catchy label to describe what sort of tests we create using this framework. They are not really “Unit Tests” that's for sure. "Integration Tests" might be a good definition, but I want a label that clearly separates it from the manual "System Integration Testing" phase of a project where real instances of the integrated systems are used. Among some colleagues, we brainstormed some suggestions: Automated Integration Tests Stubbed Integration Tests Sandbox Integration Tests Localised Integration Tests All give a good view of the sorts of tests that are being done. I think "Stubbed Integration Tests" is most catchy and descriptive. So I will use that until someone comes up with a better idea.

  Read the article

• How to I access "Deny" message from a Lidgren client?

  - by TJ Mott

  I'm using the Lidgren v3 network for a UDP client/server networking model. On the server end, I'm initializing a NetServer object with the NetIncomingMessage.ConnectionApproval message type enabled. So the client is able to successfully connect and the first packet it sends is a login packet, containing a username and password supplied by the user. The server is receiving that and doing some black magic to authenticate, and everything works up to that point. If the login fails, the server calling NetIncomingMessage.SenderConnection.Deny("Invalid Login Credentials"). I want to know how to properly receive this deny message on the client. I'm getting the message, it shows up with a message type of NetIncomingMessage.StatusChanged. If I call ReadString on that message, I get a corrupted version of the string I passed to the Deny method on the server. The type of corruption varies, I've seen odd characters in there but in every case it's truncated and is way shorter than the string I entered. Any ideas? The official documentation is sparse on this topic. I could use pointers from anyone who has successfully used the Lidgren library and uses the Accept or Deny methods. Also, if I don't do any authentication and just Approve() the connection every time, stuff actually works just fine and I'm getting reliable two-way UDP traffic. (And lastly, Stack Exchange said I don't have enough reputation to use the "Lidgren" tag....???)

  Read the article

• Business Case for investing time developing Stubs and BizUnit Tests

  - by charlie.mott

  I was recently in a position where I had to justify why effort should be spent developing Stubbed Integration Tests for BizTalk solutions. These tests are usually developed using the BizUnit framework. I assumed that most seasoned BizTalk developers would consider this best practice. Even though Microsoft suggest use of BizUnit on MSDN, I've not found a single site listing the justifications for investing time writing stubs and BizUnit tests. Stubs Stubs should be developed to isolate your development team from external dependencies. This is described by Michael Stephenson here. Failing to do this can result in the following problems: In contract-first scenarios, the external system interface will have been defined.  But the interface may not have been setup or even developed yet for the BizTalk developers to work with. By the time you open the target location to see the data BizTalk has sent, it may have been swept away. If you are relying on the UI of the target system to see the data BizTalk has sent, what do you do if it fails to arrive? It may take time for the data to be processed or it may be scheduled to be processed later. Learning how to use the source\target systems and investigations into where things go wrong in these systems will slow down the BizTalk development effort. By the time the data is visible in a UI it may have undergone further transformations. In larger development teams working together, do you all use the same source and target instances. How do you know which data was created by whose tests? How do you know which event log error message are whose?  Another developer may have “cleaned up” your data. It is harder to write BizUnit tests that clean up the data\logs after each test run. What if your B2B partners' source or target system cannot support the sort of testing you want to do. They may not even have a development or test instance that you can work with. Their single test instance may be used by the SIT\UAT teams. There may be licencing costs of setting up an instances of the external system. The stubs I like to use are generic stubs that can accept\return any message type.  Usually I need to create one per protocol. They should be driven by BizUnit steps to: validates the data received; and select a response messages (or error response). Once built, they can be re-used for many integration tests and from project to project. I’m not saying that developers should never test against a real instance.  Every so often, you still need to connect to real developer or test instances of the source and target endpoints\services. The interface developers may ask you to send them some data to see if everything still works.  Or you might want some messages sent to BizTalk to get confidence that everything still works beyond BizTalk. Tests Automated “Stubbed Integration Tests” are usually built using the BizUnit framework. These facilitate testing of the entire integration process from source stub to target stub. It will ensure that all of the BizTalk components are configured together correctly to meet all the requirements. More fine grained unit testing of individual BizTalk components is still encouraged.  But BizUnit provides much the easiest way to test some components types (e.g. Orchestrations). Using BizUnit with the Behaviour Driven Development approach described by Mike Stephenson delivers the following benefits: source: http://biztalkbddsample.codeplex.com – Video 1. Requirements can be easily defined using Given/When/Then Requirements are close to the code so easier to manage as features and scenarios Requirements are defined in domain language The feature files can be used as part of the documentation The documentation is accurate to the build of code and can be published with a release The scenarios are effective to document the scenarios and are not over excessive The scenarios are maintained with the code There’s an abstraction between the intention and implementation of tests making them easier to understand The requirements drive the testing These same tests can also be used to drive load testing as described here. If you don't do this ... If you don't follow the above “Stubbed Integration Tests” approach, the developer will need to manually trigger the tests. This has the following risks: Developers are unlikely to check all the scenarios each time and all the expected conditions each time. After the developer leaves, these manual test steps may be lost. What test scenarios are there?  What test messages did they use for each scenario? There is no mechanism to prove adequate test coverage. A test team may attempt to automate integration test scenarios in a test environment through the triggering of tests from a source system UI. If this is a replacement for BizUnit tests, then this carries the following risks: It moves the tests downstream, so problems will be found later in the process. Testers may not check all the expected conditions within the BizTalk infrastructure such as: event logs, suspended messages, etc. These automated tests may also get in the way of manual tests run on these environments.

  Read the article

• TODO Formatting

  - by charlie.mott

  Article Source: http://geekswithblogs.net/charliemott TODO's should only be used for a short period of time to remind you that something needs to be done. They should then be addressed as soon as possible. In order to know who owns a TODO task and how long it’s been outstanding, my company uses the following standard for TODO formatting: Format:     // TODO : Owner Initials – Date Created – Description of task. Sample:     // TODO: CM – 2012/01/20 – Move this class to a new location so it can be reused. Using this pattern makes it easy to use the Resharper TODO explorer. The Carrot In order to make it easy for developers to apply this rule, a code snippet can be created in Visual Studio. Even better, I created a Resharper template. This gives the facility to use the current user name and current date macros. image This actually makes the formatting look like this. Sample:     // TODO: cmott – 2012/01/20 – Move this class to a new location so it can be reused. The Stick How to you enforce such a rule? I tried to create a custom Resharper Highlighting Pattern to perform custom code analysis inspection for deviations from this pattern. However, I did not have any success. The find dialog would not accept // text. If I work it out, I will update this blog post. StyleCop Instead I created a custom StyleCop rule. I followed the approach used with the StyleCop Contrib project. This provides a simple to use base class and easy to use unit testing framework. I will upload this todo format analyzer as a patch to that project. image

  Read the article

• Azure Task Scheduling Options

  - by charlie.mott

  Currently, the Azure PaaS does not offer a distributed\resilient task scheduling service.  If you do want to host a task scheduling product\solution off-premise (and ideally use Azure), what are your options? PaaS Option 1: Worker Roles Use a worker role to schedule and execute actions at specific time periods.  There are a few frameworks available to assist with this: http://azuretoolkit.codeplex.com https://github.com/Lokad/lokad-cloud/wiki/TaskScheduler http://blog.smarx.com/posts/building-a-task-scheduler-in-windows-azure - This addresses a slightly different set of requirements. It’s a more dynamic approach for queuing up tasks, but not repeatable tasks (e.g. daily). I found the Azure Toolkit option the most simple to implement.  Step 1 : Create a domain entity implementing IJob for each job to schedule.  In this sample, I asynchronously call a WCF service method. 1: namespace Acme.WorkerRole.Jobs 2: { 3: using AzureToolkit; 4: using ScheduledTasksService; 5: 6: public class UploadEmployeesJob : IJob 7: { 8: public void Run() 9: { 10: // Call Tasks Service 11: var client = new ScheduledTasksServiceClient("BasicHttpBinding_IScheduledTasksService"); 12: client.UploadEmployees(); 13: client.Close(); 14: } 15: } 16: } Step 2 : In the worker role run method, add the jobs to the toolkit engine. 1: namespace Acme.WorkerRole 2: { 3: using AzureToolkit.Engine; 4: using Jobs; 5:   6: public class WorkerRole : WorkerRoleEntryPoint 7: { 8: public override void Run() 9: { 10: var engine = new CloudEngine(); 11:   12: // Add Scheduled Jobs (using CronJob syntax - see http://www.adminschoice.com/crontab-quick-reference). 13:   14: // 1. Upload Employee job - 8.00 PM every weekday (Mon-Fri) 15: engine.WithJobScheduler().ScheduleJob<UploadEmployeesJob>(c => { c.CronSchedule = "0 20 * * 1-5"; }); 16: // 2. Purge Data job - 10 AM every Saturday 17: engine.WithJobScheduler().ScheduleJob<PurgeDataJob>(c => { c.CronSchedule = "0 10 * * 6"; }); 18: // 3. Process Exceptions job - Every 5 minutes 19: engine.WithJobScheduler().ScheduleJob<ProcessExceptionsJob>(c => { c.CronSchedule = "*/5 * * * *"; }); 20:   21: engine.Run(); 22: base.Run(); 23: } 24: } 25: } Pros Cons Azure Toolkit option is simple to implement. For the AzureToolkit option, you are limited to a single worker role.  Otherwise, the jobs will be executed multiple times, once for each worker role instance.   Paying for a continuously running worker role, even if it just processes a single job once a week.  If you only have a few scheduled tasks to run calling asynchronous services hosted in different web roles, an extra small worker role likely to be sufficient.  However, for an extra small worker role this still costs $14.40/month (03/09/2012). Option 2: Use Scheduled Task on Azure Web Role calling a console app Setup a Windows Scheduled Task on the Azure Web Role. This calls a console application that calls the WCF service methods that run the task actions. This design is described here: http://www.ronaldwidha.net/2011/02/23/cron-job-on-azure-using-scheduled-task-on-a-web-role-to-replace-azure-worker-role-for-background-job/ http://www.voiceoftech.com/swhitley/index.php/2011/07/windows-azure-task-scheduler/ http://devlicio.us/blogs/vinull/archive/2011/10/23/moving-to-azure-worker-roles-for-nothing-and-tasks-for-free.aspx Pros Cons Fairly easy to implement. Supportability - I RDC’ed onto the Azure server and stopped the scheduled task. I then rebooted the machine and the task was re-started. I also tried deleting the task and rebooting, the same thing occurred. The only way to permanently guarantee that a task is disabled is to do a fresh deployment. I think this is a major supportability concern.   Saleability - multiple instances would trigger multiple tasks. You can only have one instance for the scheduled task web role. The guidance implements setup of the scheduled task as part of a web role instance. But if you have more than one instance in a web role, the task will be triggered multiple times for each scheduled action (once per machine). Workaround: If we wanted to use scheduled tasks for another client with a saleable WCF service, then we could include the console & tasks scripts in a separate web role (e.g. a empty WCF service with no real purpose to it). SaaS Option 3: Azure Marketplace I thought that someone might be offering this type of service via the Azure marketplace. At the point of writing this blog post, I did not find anyone doing so. https://datamarket.azure.com/ Pros Cons   Nobody currently offers this on the Azure Marketplace. Option 4: Online Job Scheduling Service Provider There are plenty of online providers that offer this type of service on a pay-as-you-go approach.  Some of these are free for small usage.   Many of these providers are listed here: http://en.wikipedia.org/wiki/Webcron Pros Cons No bespoke development for scheduler. Reliance on third party. IaaS Option 5: Setup Scheduling Software on Azure IaaS VM’s One of job scheduling software offerings could be installed and configured on Azure VM’s.  A list of software options is listed here: http://en.wikipedia.org/wiki/List_of_job_scheduler_software Pros Cons Enterprise distributed\resilient task scheduling service VM Setup and maintenance   Software Licence Costs Option 6: VM Gallery A the time of writing this blog post, I did not spot a VM in the gallery that included pre-installation of any of the above software options. Pros Cons   No current VM template. Summary For my current project that had a small handful of tasks to schedule with a limited project budget I chose option 1 (a worker role using the Azure Toolkit to schedule tasks).  If I was building an enterprise scale solution for the future, options 4 and 5 are currently worthy of consideration. Hopefully, Microsoft will include tasks scheduling in the future as part of their PaaS offerings.

  Read the article

• How to keep menu in a single place without using frames

  - by TJ Ellis

  This is probably a duplicate, but I can't find the answer anywhere (maybe I'm searching for the wrong thing?) and so I'm going to go ahead and ask. What is the accepted standard practice for creating a menu that is stored in a single file, but is included on every page across a site? Back in the day, one used frames, but this seems to be taboo now. I can get things layed out just the way I want, but copy/pasting across every page is a pain. I have seen php-based solutions, but my cheap-o free hosting doesn't support php (which is admittedly a pain, but it's a fairly simple webpage...). Any ideas for doing this that does not require server-side scripting?

  Read the article

• Moodle 2 pages loading up to 2000% faster

  - by TJ

  On average our Moodle 2 pages were loading in 2.8 seconds, now they load in as little as 0.12 seconds, so that’s like 2333.333% faster!What was it I hear you say?Well it was the database connection, or more correctly the database library. I was using FreeTDS http://docs.moodle.org/22/en/Installing_MSSQL_for_PHP, but now I’m using the new Microsoft Drivers 3.0 for PHP for SQL Server http://www.microsoft.com/en-us/download/details.aspx?id=20098. I’m in a Windows Server IT department, and in both our live and development environments, we have Moodle 2.2.3, IIS 7.5, and PHP 5.3.10 running on two Windows Server 2008 R2 servers and using MS Network Load Balancing.Since moving to Moodle 2, the pages have always loaded much more slowly than they did in Moodle 1.9, I’ve been chasing this issue for quite a while. I had previously tried the Microsoft Drivers for PHP for SQL Server 2.0, but my testing showed it was slower than the FreeTDS driver.Then yesterday I found Microsoft had released the new version, Microsoft Drivers 3.0 for PHP for SQL Server, so I thought I’d give it a run, and wow what a difference it made.Pages that were loading in 2.8 seconds, now they load in as little as 0.12 seconds, 2333.333% faster…I have more testing to do, but so far it’s looking good, I have scheduled multi user load testing for early next week (fingers crossed).To make the change all I need to do was,download the driverscopy the relevant files to PHP\ext (for us they were php_pdo_sqlsrv_53_nts.dll and php_sqlsrv_53_nts.dll) install the Microsoft SQL Server 2012 Native Client x64 http://www.microsoft.com/en-us/download/details.aspx?id=29065 add to PHP.ini, extension=php_pdo_sqlsrv_53_nts.dll, extension=php_sqlsrv_53_nts.dllremove form PHP.ini, extension=php_dblib.dllvchange in PHP.ini, mssql.textlimit = 20971520 and mssql.textsize = 20971520change Moodle config.php, $CFG->dbtype = 'sqlsrv'; and 'dbpersist' => Trueand then reboot and test…I've browsed courses, backed up/restored some really large and complicated courses, deleted courses etc. etc. all good.Still more testing to do but, hey this is good start...Hope this helps anyone experiencing the same slowness…

  Read the article

• MVC & Windows Authentication

  - by TJ

  Changed the ValidateUser function  public bool ValidateUser(string userName, string password)         {             bool validation;             try             {                 LdapConnection ldc = new LdapConnection(new LdapDirectoryIdentifier((string)null, false, false));                 NetworkCredential nc = new NetworkCredential(userName, password, "domainname.com");                 ldc.Credential = nc;                 ldc.AuthType = AuthType.Negotiate;                 ldc.Bind(nc); // user has authenticated at this point, as the credentials were used to login to the dc.                  string myvar = ldc.SessionOptions.DomainName;                 validation = true;             }             catch (LdapException)             {                 validation = false;             }             return validation;         }

  Read the article

• Using JQuery to open a popup window and print

  - by TJ Kirchner

  Hello, A while back I created a lightbox plugin using jQuery that would load a url specified in a link into a lightbox. The code is really simple: $('.readmore').each(function(i){ $(this).popup(); }); and the link would look like this: <a class='readmore' href='view-details.php?Id=11'>TJ Kirchner</a> The plugin could also accept arguments for width, height, a different url, and more data to pass through. The problem I'm facing right now is printing the lightbox. I set it up so that the lightbox has a print button at the top of the box. That link would open up a new window and print that window. This is all being controlled by the lightbox plugin. Here's what that code looks like: $('.printBtn').bind('click',function() { var url = options.url + ( ( options.url.indexOf('?') < 0 && options.data != "" ) ? '?' : '&' ) + options.data; var thePopup = window.open( url, "Member Listing", "menubar=0,location=0,height=700,width=700" ); thePopup.print(); }); The problem is the script doesn't seem to be waiting until the window loads. It wants to print the moment the window appears. As a result, if I click "cancel" to the print dialog box, it'll popup again and again until the window loads. The first time I tried printing I got a blank page. That might be because the window didn't finish load. I need to find a way to alter the previous code block to wait until the window loads and then print. I feel like there should be an easy way to do this, but I haven't found it yet. Either that, or I need to find a better way to open a popup window and print from the lightbox script in the parent window, without alternating the webpage code in the popup window.

  Read the article

• Increase RGB components every Hour (r), Minute (g), Second (b) for digital clock

  - by TJ Fertterer

  So I am taking my first javascript class (total noob) and one of the assignments is to modify a digital clock by assigning the color red to hours, green minutes, blue to seconds, then increase the respective color component when it changes. I have successfully assigned a decimal color value (ex. "#850000" to each element (hours, minutes, seconds), but my brain is fried trying to figure out how to increase the brightness when hours, minutes, seconds change, i.e. red goes up to "#870000" changing from 1:00:00 pm to 2:00:00 pm. I've searched everywhere with no help on how to successfully do this. Here is what I have so far and any help on this would be greatly appreciated. TJ <script type="text/javascript"> <!-- function updateClock() { var currentTime = new Date(); var currentHours = currentTime.getHours(); var currentMinutes = currentTime.getMinutes(); var currentSeconds = currentTime.getSeconds(); // Pad the minutes with leading zeros, if required currentMinutes = ( currentMinutes < 10 ? "0" : "" ) + currentMinutes; // Pad the seconds with leading zeros, if required currentSeconds = ( currentSeconds < 10 ? "0" : "" ) + currentSeconds; // Choose either "AM" or "PM" as appropriate var timeOfDay = ( currentHours < 12 ) ? "AM" : "PM"; // Convert the hours component to 12-hour format currentHours = ( currentHours > 12 ) ? currentHours - 12 : currentHours; // Convert an hours component if "0" to "12" currentHours = ( currentHours == 0 ) ? 12 : currentHours; // Get hold of the html elements by their ids var hoursElement = document.getElementById("hours"); document.getElementById("hours").style.color = "#850000"; var minutesElement = document.getElementById("minutes"); document.getElementById("minutes").style.color = "#008500"; var secondsElement = document.getElementById("seconds"); document.getElementById("seconds").style.color = "#000085"; var am_pmElement = document.getElementById("am_pm"); // Put the clock sections text into the elements' innerHTML hoursElement.innerHTML = currentHours; minutesElement.innerHTML = currentMinutes; secondsElement.innerHTML = currentSeconds; am_pmElement.innerHTML = timeOfDay; } // --> </script> </head> <body onload="updateClock(); setInterval( 'updateClock()', 1000 )"> <h1 align="center">The JavaScript digital clock</h1> <h2 align="center">Thomas Fertterer - Lab 2</h2> <div id='clock' style="text-align: center"> <span id="hours"></span>: <span id='minutes'></span>: <span id='seconds'></span> <span id='am_pm'></span> </div> </body> </html>

  Read the article

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• How easy is it to migrate a Linux VM image from one VM env to another?

  - by T.J. Crowder

  If I stick to one of the standard, well-supported VM disk images (like a raw image, or VDI, VMDK, ...), are Linux VMs typically easy to move between VM environments? E.g., between (say) VirtualBox and KVM, or VMWare and Xen? I'm talking here of fully virtualized environments, not paravirtualization requiring support within the guest OS. It seems to me that the kernels in most Linux distributions these days are configured to...keep an open mind and detect things at boot time, so you don't have the issue that you sometimes have moving a Windows VM from one virtualization system to another (I'm thinking particularly of HAL issues that Windows has, like ACPI vs. non-ACPI; I've also just had Windows VMs generally acting strangely when moved from VMWare to VirtualBox, for instance). I'm looking for a general answer, but if it helps, specifically I'm mostly going to be doing this with Ubuntu 8.04 LTS and 10.04 LTS guests. But that could change.

  Read the article

• Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

  - by T.J. Crowder

  Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

  Read the article

• Intel D510MO board - 1000Mbit LAN or not?

  - by T.J. Crowder

  The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

  Read the article

• How to get rid of a stubborn 'removed' device in mdadm

  - by T.J. Crowder

  One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

  Read the article

• Why is port 444 open on this router?

  - by TJ Thind

  I have a Cisco RV110W. I ran nmap at it from the outside and nmap reports that the router has tcp port 444 open. Yet there are no port forwarding rules specifying this port. It should as far as I can tell, be closed. There's even a service listening to that port which I can connect to through telnet. I threw some SNPP commands at it but the service doesn't respond to any of them so I don't believe it's SNPP. Does anyone have any idea why this particular router has tcp port 444 open? I haven't been able to find anything in the manual or on Cisco's website.

  Read the article

• Simple end-to-end load and bottleneck monitoring for DB-based web sites

  - by T.J. Crowder

  What tools do you use / would you recommend for monitoring a Linux-based, DB-based website's servers for bottlenecks and load? The obvious goal being to know when growth has gotten to the point where it's necessary to scale up (or out) one or more of the bits and pieces because the current system won't be managing the load if an observed trend continues. I'm looking for general recommendations based on standard Linux load metrics, disk I/O metrics, network I/O metrics, etc., but if specifics are helpful: It'll be Tomcat6 using APR (possibly with a Varnish or similar caching and balancing front-end), MySQL, and either Ubuntu 8.04 LTS or 10.04 LTS depending on timing. I know about top, vmstat, iostat, bwmon and the like that collect and parse info from the /proc file system (et. al.); and obviously MySQL provides a lot of queriable performance information. I could use those directly, probably automating periodic monitoring logs with scripts and such. But I have a suspicion that I'd be reinventing a wheel... For example, Hyperic HQ seems to be along the lines of what I'm looking for. Others? Meta: I tend to think of "recommendation" questions as needing to be CW because there's no one right answer, but I see a lot of these here that aren't CWs, so I haven't marked it as one. I'll happily do so if enough people think I should.

  Read the article

1 2 3 4  | Next Page >