Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 112/379 | < Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >

• How do I prevent my filesystems from being mounted read-only after suspending?

  - by Chas. Owens

  I have Ubuntu 12.04 installed on an SDHC card (only one ext2 partition, no swap). When I suspend using pm-suspend, my root filesystem is mounted read-only. I am currently "fixing" this with the following file: /etc/pm/sleep.d/99_make_disk_rw: #!/bin/sh mount -o remount,rw / But the disk is marked as needing an fsck on reboot. How can I prevent the filesystem from being mounted read-only or whatever is going wrong here. Update: It looks like it is getting mounted read-only because an error occurred. I have changed the mount options for / in /etc/fstab to noatime,nodiratime,errors=continue and it no longer mounts the SDHC card as read-only after it resumes. So the problem is happening when it suspends, not when it resumes as I had thought. I checked /sys/bus/usb/devices/1-4/power/persist and it is set to 1. So the SDHC card shouldn't appear disconnected to the OS (or more accurately it should recover from the disconnection without error). Here seems to be the relevant section of the syslog Sep 10 10:34:23 iubit kernel: [ 748.246226] sd 4:0:0:0: [sdb] Media Changed Sep 10 10:34:23 iubit kernel: [ 748.246234] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Sep 10 10:34:23 iubit kernel: [ 748.246243] sd 4:0:0:0: [sdb] Sense Key : Unit Attention [current] Sep 10 10:34:23 iubit kernel: [ 748.246253] Info fld=0x0 Sep 10 10:34:23 iubit kernel: [ 748.246258] sd 4:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed Sep 10 10:34:23 iubit kernel: [ 748.246271] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 5d 3e f0 00 00 08 00 Sep 10 10:34:23 iubit kernel: [ 748.246291] end_request: I/O error, dev sdb, sector 6110960 Sep 10 10:34:23 iubit kernel: [ 748.247027] EXT2-fs (sdb1): error: ext2_fsync: detected IO error when writing metadata buffers Sep 10 10:34:23 iubit anacron[6954]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:23 iubit anacron[6954]: Normal exit (0 jobs run) Sep 10 10:34:24 iubit laptop-mode: Laptop mode Sep 10 10:34:24 iubit laptop-mode: enabled, not active Sep 10 10:34:24 iubit kernel: [ 749.055376] sd 4:0:0:0: [sdb] No Caching mode page present Sep 10 10:34:24 iubit kernel: [ 749.055387] sd 4:0:0:0: [sdb] Assuming drive cache: write through Sep 10 10:34:25 iubit anacron[7555]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:25 iubit anacron[7555]: Normal exit (0 jobs run) Sep 10 10:34:31 iubit kernel: [ 756.090861] EXT2-fs (sdb1): previous I/O error to superblock detected

  Read the article

• Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

  - by Liz

  Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

  Read the article

• Cannot see boot options after editing grub background

  - by cipricus

  After solving this problem I managed to get myself into truble again out of nothing by trying to change the display of the dual boot option page in Boot Customizer. I have changed the background, the fonts size (I have increased them) and font style (I have chosen UnDotum). But Boot Customizer gave me an error (I mean a message that the application was closed unexpectedly or smth). I have restarted BootCustomizer and the settings were there. When I rebooted, instead of the normal boot options list, just the background image that I had selected and nothing else. I used Boot Repair to repair grub, it says it did it successfully, but I still get the background image when I try to boot. Any ideas? (Could it be the matter that I chose UnDotum font style? That was installed in Lubuntu - but how could it be accessible in displaying boot options?) The contents of etc/default/grub are: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" I have tried to modify etc/default/grub: GRUB_HIDDEN_TIMEOUT=0 to 10 GRUB_HIDDEN_TIMEOUT_QUIET=true to false and GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" to "" but it doesn't help Also, using Shift doesn't make the list visible. I am looking for something like a command that would reset grub options to default. [When trying to reinstall grub i get to this window in term:

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop where with their software on and I also have my own where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also sometimes spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the High-CPU On-Demand Instances (medium) for 8 hours a day for a year costs me 580$, which is acceptable. I imagine that when I approach the workplace each day, I will make a single click my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you forsee?

  Read the article

• How to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  - by mehdi

  I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

  Read the article

• Low graphic mode after switching to fglrx drivers

  - by MrKenkadze27

  I have another problem on my laptop after trying to fix another issue. So, because of this issue, I wanted to switch to fglrx to fix it and after restart, I got this screen: I went back to terminal and I got rid of this problem by "purge"-ing the fglrx driver and removing it, going back to problem number one. I tried lot of methods to fix this such as this ones but they ether switched back to open-source drivers or didn't helped at all. So would anyone like to help? maybe give some commends to try? My Laptop has 2 GPU, AMD Radeon HD 7650M and Intel(R) HD Graphics 4000. AMD is running always making my laptop too hot. Here's one of the Xorg.5.log file paste, I am sure it will be useful finding my problem. Thanks! Please make answer easy to understand as I am not an expert, this problem is keeping me from being one. Also the AMD driver which can be downloaded from their site doesn't install, it says non compatible graphics card but Ubuntu Software Updater sure installs it.

  Read the article

• High Power Consumption and Wakeups on my Asus X54H with 12.04

  - by Marogian

  So I've been using powertop to try and reduce the power consumption on my laptop as I only seem to get about 3 hours of battery. From reading other threads on here it seems my power consumption and wakeups are strangely high, here's a summary: The battery reports a discharge rate of 10.2 W Summary: 651.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec The things which stand out as odd: 1.31 W 4.0 ms/s 166.7 Interrupt PS/2 Touchpad / Keyboard / Mouse So more than 10% of my battery is being consumed by my touchpad/keyboard? That doesn't seem right. 548 mW 34.3 ms/s 45.9 Process compiz 5% from Compiz. Is this correct? 376 mW 1.8 ms/s 47.5 Interrupt [51] i915 298 mW 1.4 ms/s 37.7 Timer tick_sched_timer Another few percent from these things- not quite sure what they are. For reference I've installed Laptop Mode Tools, Jupiter (on power save), the CPU governor is definitely on powersave and brightness is on minimum. What else can I do/Any ideas? I've seen other posts on here reporting laptop battery lives of ~8 hours and power consumption of 4W rather than my 10W... Thanks!

  Read the article

• Using EC2 instance as main development platform

  - by David

  My problem I am working as a consultant for various companies. Each company provides me with a laptop with their software on and I also have my own, where I have my development environment. I tend to buy a new laptop every second year and find myself spending lots of time configuring and installing software. I also spend a lot of time waiting for my laptop to process things. To solve all these issues, I am now considering using EC2 (running windows instances) as my main development platform and just access this from any PC I happen to be at. I calculated that running the Large instance (cheapest 64-bit) for 8 hours a day for a year costs me 960$ per year, which is acceptable. I imagine that when I approach the workplace each day, I will make a single tap on my phone to fire up the instance, so it is ready when I get to work. I should have different icons on my phone to fire up the various instance types. The same software should of course automatically be loaded on the various hardware (sometimes I would even need their instance with 68.4 GB of memory). Another advantage is that if I am having a specific problem with my instance, I could fire up another instance and have someone look into the problem and update the image. My question: Does anyone have experience with such a setup on EC2? What kind of problems do you foresee?

  Read the article

• When running a .jar application with OpenJDK, my keyboard becomes unresponsive?

  - by Mochan

  I recently downloaded a Java application with the .jar format, and had it running on my computer not so long ago. Now that I'm using my desktop instead of laptop temporarily, I want it to run. On my laptop it was a tremendous hassle to get OpenJDK to even run the application without it going black, and now on my desktop I don't have that problem. However, when I run the application, my keyboard becomes unresponsive and doesn't type at all. This is a really big problem because it's demands the use of a keyboard. It works as normal on my laptop though, and it works perfectly. But now on the desktop its completely useless. I don't know if there's like a keyboard driver I'm missing, but there shouldn't be because the keyboard runs flawlessly everywhere else. I'm using OpenJDK 6 because the 7 has the same 'black screen' I mentioned, so I need this to work within OpenJDK 6. Thanks so much in advance and I'll try to specify as many details as I can. M

  Read the article

• Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

  - by vivi

  I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

  Read the article

• Gparted funkiness - won't recognize 1TB, full-hdd /home partition, but recognizes ext4 and /home label

  - by Kurtosis

  I have a 1TB SATA hard disk from my old desktop, and the entire thing is an ext4 /home partition (/, /boot, and swap were all on another hdd). It is now in a USB2 enclosure and I want to use it to back up my current laptop /home. To do this I need to shrink the /home partition on the 1TB backup drive. It only uses about 500GB so that shouldn't be a problem, I'll start the laptop with an Ubuntu live USB, plug in the 1TB drive, and use Gparted to shrink the 1TB /home partition to ~500GB. Then I can create a second partition in the newly freed space, and cp -ax my laptop's /home over to it. Unfortuntely, Ubuntu Live USB can detect and mount the external hdd, and Gparted can see it's there, but Gparted can't read it and hence can't resize it. Disk Utility reports the drive is fine, no errors, so I'm not sure what's the problem. See linked pics, worth a thousand words. Anyone know what the problem is here? Any pointers in the right direction much appreciated.

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Is there an easy way to configure an Ubuntu system to function as a proxy/file server from behind an NAT?

  - by amol.kamath

  Sorry for the long question, but the situation/desire is quite complex. Here is my setup: I have a laptop which I carry around everywhere and I have a desktop sitting at home, connected to the internet through a router using NAT. My objective is to create a connection from my laptop to my desktop that can allow me to (in order of priority): Use the desktop as a proxy server Access files on the desktop remotely Control said desktop from the laptop using VNC or similar. Now here is the scene. I have already looked up and tried several ways to achieve the above goals. Teamviewer - I used it and didn't like it. This is not an option. SSH - This seems ideal, I have figured a way to use this for both proxy and file sharing. However, I am currently unable to connect it due to the NAT. I have a separate thread trying to get that to work here. VPN - I've figured out how to use this method for proxy, but not file sharing. However this faces the same problem as the above: I can't get it to connect through the NAT. Does anyone have any other solutions for what I want? Otherwise, if there are solutions to connecting through the NAT, please tell me (in the other thread). Thanks

  Read the article

• Windows 8 BIOS - Boot Ubuntu from External HDD

  - by F3AR3DLEGEND

  My laptop came pre-loaded with Windows 8 64-bit (only storage device is a 128 GB SSD). Since it is my school laptop/I've heard creating a Linux partition alongside Windows 8 is not very wise I installed Ubuntu onto my external hard drive. I have a 500GB external HDD with the following partitions: Main Partition - NFTS - ~400 GB Extension Partition / - ext2 - ~25gb /home - ext2 - ~30gb swap - ext2 - 10gb /boot - ? - 10gb ? = not sure of partition Using the PenDriveLinux installer, I created a LiveUSB version of Ubuntu 12.04 (LTS) on a 4GB USB drive. Using that, I installed Ubuntu onto the external hard-drive, without any errors (or at least none that I was notified of). Using the BIOS settings, I changed the OS-loading order so that it is in this order: My External USB HDD Windows Boot Loader Some other things Therefore, Ubuntu should load from my hard drive first, but it doesn't. Also, my hard drive is in working condition, and it turns on when BIOS starts (there is a light indicator). When I start my laptop, it goes directly to Windows 8 (I have the fast startup setting disabled as well). So, is there any way for me to set it up so that when my HDD is connected, it will automatically load Ubuntu? Thanks in advance!

  Read the article

• how to create a mirror of minimum size to install Ubuntu

  - by Registered User

  I need to create an http url at my laptop to have a Ubuntu installation begin within my laptop on a Xen environment. This is how the final thing will look like http://bderzhavets.wordpress.com/2008/10/28/install-ubuntu-intrepid-server-pv-domu-at-xen-33-port-via-httpgetco-centos-52-dom0/ the host and client are both going to be my laptop, I Google d and came across apt-mirror and some other packages. I do not want to archive entire 15 GB Ubuntu repositories on my machine. It is not possible to use a CD,ISO,loop mounted disk (reason mentioned below). I have tried using netboot image on local machine which failed because if you are attempting to create a virtual machine on a hardware which does not support VT virt-manager installer necessarily needs a URL of this sort http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/ any other option to create guest OS is simply grayed out. The unfortunate part is my Ethernet connections do not work when I boot with Xen-4.0 and a pv-ops Dom0 kernel from Jeremy's tree.Which is where I have to do this work.So I have to create a URL structure which is similar to Ubuntu mirrors.So how can I do this in bare minimum so that at least the console boots and once the console comes I can do some work.

  Read the article

• Connect to NFS on availability

  - by berkes

  What would be a good way to automatically mount an NFS when it gets/is available? I have the following: Media server at home, running Ubuntu, 10.10 with GUI *) Laptop often at home, often on the road or at clients. Ubuntu 10.10 with GUI. What I'd like is my laptop connecting to the nfs (or any other mountable networked filesystem) so that Banshee sees all the music, new podcast-entries (and video) from that media-server. I already have firefly (mt-daapd) running, which works, but is flakey on both server-side and client-side. But its biggest downside, is that I cannot easily fix metadata on files on the media-server this way. DAAP is read-only by design. I can mount nfs manually, through a sudo mount /media/nfsmultimedia/. I am not looking for a manual, or howto on setting up a NFS client and server. Merely a way to have this more transparently working. Obviously I'd like the NFS to be unmounted if the network is no longer available (i.e. when I open my laptop-lid on my clients buro). It may be, that an NFS is not suited for this, in that case, I'd love to hear other options. :) *) Actually: I also have a fileserver, backupserver and webserver to which I'd like to connect in a somewhat similar way. Right now I connect to these over SSH, using gvfs.

  Read the article

• Grub does not show a Windows 8 option after dual boot

  - by skytreader

  So, I've successfully dual-booted my Windows 8 machine with Ubuntu 12.04 . However, I still don't have a convenient method of choosing what OS to load at boot time. After installing Ubuntu, my computer still loads Windows 8 directly. I then added grubx64.efi to the white list of my boot loader. But after that, my machine loads Ubuntu directly without even a shadow of GRUB showing up! I used boot-repair and I got this paste.ubuntu URL: paste.ubuntu.com/1326074. After running boot-repair (and re-white listing the grubx64.efi file), GRUB now shows up but without any Windows 8 option! Lastly, I ran sudo fdisk -l and it gave me this: WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x6396389f Device Boot Start End Blocks Id System /dev/sda1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. I'm guessing my problem has something to do with the warning from fdisk above but I don't know what to do with it. How do I proceed now?

  Read the article

• Why is my fresh install of 12.04 running slow?

  - by user75129

  Hey guys I'm a new linux user, I figured it would be the best for the laptop I just purchased because it's said to be faster than Windows 7. I'm currently dual-booting with Windows 7 Professial and Ubuntu 12.04. The laptop I am using is the LG X Note P210 Specs: Intel Core i5 470UM Dual Core clocked at 1.33GHz 12.5" HD LED LCD Screen at 1366 by 768 4GB DDR3 @ 1333 MHz RAM Integrated Intel HD Graphics Card 4 Cell Battery with 3150mAh It comes loaded Windows 7 Home Premium 64-Bit, it runs fine on that but my Ubuntu 12.04 runs slower than it and I don't understand why, it definitely has decent specs to run even a 64-bit operating system and do some gaming. Granted I know it's not the best but for a laptop it does the job so Ubuntu should work especially since it's said to make older units with worse specs run even better. I'm not all that familiar with coding and all so what are things I can do to optimize speed without overclocking? Boot up is fine, its program response time I believe, once Im in the actual OS, it lags, slows down, apps stop working, take forever to load up apps.

  Read the article

• Update usb Driver

  - by Enrico Caponi

  i just now start to use Xubuntu, and i install Xubuntu on my second laptop i had in my garage, just for put back in use. On the ASUS xubuntu work really perfect but now after i put on my old laptop i have some little proble. My Laptop old is a Fujitsu Siemens AMILO L7310GW, i explain my problem: The installation works fine, everything is quite good but there are few little problem i have a know idea, how I can fix them... so USB: i have a optical mouse usb and works quite strage, when i tip on terminal "lsusb" the system recognized fine my mouse but the strange thing is the mouse it move like jump around the desktop. what i had done: - update the usbdrive - change mouse - tried mouse on different pc and on both they work fine another problem i don't know where came from: when i take off my mouse, and try to put back doesn't work at all, if i want back i have to restart the OS. and no usb pen or other ar working so for that i think is usb problem. i can tell before Xubuntu whit winXP the usb work fine, but i don't want windows anymore... So i tried almost everything you can find on the net, maybe i have done something wrong so please help me. I tried also to install the new version 12.04, but i came back for the 11.10.

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• Problem with wake after suspend using USB remote.

  - by Bod

  Hi, I'm a linux newbie looking for some help. I'm currently setting up an XBMC HTPC using a laptop and 10.10 and all works great except for waking from resume using the power button on the remote. The suspend works from remote works fine as does the resume using the power button on the laptop. I've checked /proc/acpi/wakeup which initially showed the following. Device S-state Status Sysfs node C096 S5 *disabled pci:0000:00:1e.0 C0F1 S3 *disabled pci:0000:00:1d.0 C0F8 S3 *disabled pci:0000:00:1d.1 C0F9 S3 *disabled pci:0000:00:1d.2 C0FA S3 *disabled pci:0000:00:1d.3 C0FB S3 *disabled pci:0000:00:1d.7 C102 S5 *disabled pci:0000:00:1c.0 C22B S5 *disabled pci:0000:08:00.0 C115 S5 *disabled pci:0000:00:1c.2 C22C S5 *disabled C118 S5 *disabled pci:0000:00:1c.3 C22C S5 *disabled I've since configured the above so that the S3 devices above are enabled. I've confirmed that they are the correct devices using lspci 00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) None of this has worked unfortunately and I'm now stuck. It simply refuses to wakeup from the remote. The USB receiver shows no activity LED while suspended. Suspend/resume from the remote works fine from Windows 7 so I know the laptop is ok with it. Any ideas? I need to get this sorted to gain Wife Approval for this system. Thanks, Bod.

  Read the article

• Ubuntu 12.04 desktop, VNC viewer not refreshing screen

  - by user73279

  I've had this issues across multiple machines and multiple versions of Ubuntu desktop (all 10.04 or later). Usually it happens with an old laptop I've put Ubuntu on but now it's happening on my primary dev machine (a quad-core PC recently upgraded to Ubuntu 12.04 desktop). The problem is this - I can connect to the machine and login with the password, the initial screen looks fine but never refreshes. I can see the monitor for the machine across the room and can see the mouse move and the menus pop up but the image of the screen on the PC in front me running the VNC viewer never updates. So the mouse and keyboard commands are working. Ubuntu 12.04 Desktop Ultra VNC Viewer (also seen with RealVNC's free VNC viewer) Desktop Sharing Static IP on eth0; Dynamic ID on eth1 I think it is an Ubuntu config issue because this PC used to work just fine with 9.04, 10.04, and 11.10 (over the past couple of years). I've also had a couple of laptops that used to have this issue with older Ubuntu's but don't with 12.04. Additional info: The Win7 PC I'm trying to use to control the Ubuntu PC is connected via 2 DLink 8-port gigabit routers. The Ubuntu laptop I usually control via VNC is typically only connected to the network via wireless. The screen refresh is choppy but usable. I've repeated the issue on a Win7 laptop which was connected via ethernet and wireless.

  Read the article

• Tried to install some software, it says some packages are damaged, cannot fix them

  - by lempira

  So, I go to the Ubuntu Software Center, as soon as it opens, a window pops up with the following text: "Items cannot be installed or removed until the package catalog is repaired. Do you want to repair it now?" Then I click the "Repair" button, then a new window pops up with the following text: "Package operation failed. The installation or removal of a software package failed." Then I click on the "Details" button, which returns me the following text: installArchives() failed: Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... Can't exec "locale": No such file or directory at /usr/share/perl5/Debconf/Encoding.pm line 16. Use of uninitialized value $Debconf::Encoding::charmap in scalar chomp at /usr/share/perl5/Debconf/Encoding.pm line 17. Preconfiguring packages ... dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. Error in function: SystemError: E:Sub-process /usr/bin/dpkg returned an error code (2) dpkg: warning: 'ldconfig' not found in PATH or not executable. dpkg: error: 1 expected program not found in PATH or not executable. Note: root's PATH should usually contain /usr/local/sbin, /usr/sbin and /sbin. What should I do?

  Read the article

• tunneling x11vnc through ssh on a non standard port to ubuntu computer tightvnc

  - by user72372

  I have been stuck with setting up my virtual desktop on my ubuntu laptop. I am running ubuntu to ubuntu with x11vnc I start the process on my laptop as follows: " ssh -L5904:localhost:5900 -p Port remoteuser@remoteip." That command works, then I start x11vnc server, "x11vnc -noncache -once -shared -rfbauth ~/.vnc/passwd." This command works and starts connection. Then I open another window on my laptop and type, export VNC_VIA_CMD='/usr/bin/ssh -2 -c aes128-cbc -x -p Port -l User -f -: %L:%H:%R %G sleep 20' (not sure if works). then I type, vncviewer -endcodings Tight -depth 8 -quality 1 -via IPofremotemachine -u remoteuser localhost:01. The first time it work but from now on it just gives me the vncviewer -help screen everytime. I type in the password for my remote machine and then shows -help screen for vncviewer. I think the problem is with Tightvnc viewer but don't know what. Please help. I got some info on www.vanemery.com/Linux/VNC/vnc-over-ssh.html?.

  Read the article

• 12.10 Wireless networking

  - by user108594

  I downloaded ubuntu 12.10 using WUBI and cannot connect to the internet. I removed it and downloaded ubuntu 12.04 still cannot connect. This I assume rules out the program being the problem. I reinstalled 12.10. When loaded I get the same message W/red (x) stating Internet not connected. I went to the Settings drop down box and it does not reveal the network list but (enable networking has a ck mark). Am running a HP Laptop with a w/7/64 OS that has a kill switch that indicates (orangeno connection) I downloaded 12.10 on my desktop (on the same network) and everything OK. I tried to follow the instructions in the help menu but got lost and confused . Sincerely Dan Additional Info per request Broadcom 802.11b/g Wlan Internal pc [hp laptop] P.S. I've been out of town for about a month. TKS for your gitback I did install 12.10 via cd and everything ok,but retried alongside 7 and unable to connect to internet,also took laptop and hard wired using ethernet cable and everything ok. stumped again and running out of ideas!!!

  Read the article

< Previous Page | 108 109 110 111 112 113 114 115 116 117 118 119  | Next Page >