Search Results

Search found 25718 results on 1029 pages for 'external hard drive'.

Page 116/1029 | < Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >

• Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

  - by Filip Ekberg

  I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

  Read the article

• What Raid should I use for Website Static Files / Content

  - by Simon

  I'm building a Web server (IIS7) and would like to know the best practice for storing static content and the uploaded files of website's users (predominantly pictures, but also other documents like pdf's). I will keep the operating System on a Raid 1 array. Where should I be keeping the actual website's pages & files, it's own static content, and that of it's users? Should I be placing this content on a seperate raid array, and if so which type? I was considering using SLC SSD's (Such as the Intel's X25-e) but the following issues came to light. Will the SLC SSD's give any improvement over a 2.5" 15k SAS Drive for this type of content? If I did use SSD's, I'm under the belief I would still need to use Raid for redundancy, yet I've heard Intel X25-e's don't support TRIM. Does this scrap them as a legitimate option?

  Read the article

• Replacement Alternative for Dell FY606 in a Poweredge T105

  - by Mike C

  I have recently upgraded my Poweredge T105 server to use a SAS 6/ir RAID controller. Unfortunately, I did not realize at the time that adding the card would cause the BIOS to complain about a missing hard drive fan. This warning requires that a user press F1 to continue, which is disastrous in a server environment. I have searched all over found that the specific part I need is a Dell FY606 fan. However, I have yet to find a suitable retailer that covers this part. I have contacted Dell and they do not have this part in stock. Are there any alternative models of a fan that I could use in place of an FY606? Seems like a pretty straightforward part, just a fan that connects to a 4-pin power connector on the motherboard.

  Read the article

• Windows 7 Disk Management Spanned Volume vs Striped Volume

  - by Kairan

  Im looking for a reason why a person would use a Spanned volume rather than a Striped volume? If my understanding is correct Striped: Faster read/write speed than spanned, but I "assume" more wear+tear Spanned: No speed benefit like striped, but data is written sequentially and fills up Drive1 before filling up Drive2, so it saves on wear+tear Beyond that Im not sure if there is any other deciding factor on which to use. Definition found below: A striped volume uses the free space on more than one physical hard disk to create a bigger volume. Unlike a spanned volume, a striped volume writes across all volumes in the stripe in small blocks, distributing the load across the disks in the volume. The portions of disk used to create the volume need to be the same size; the size of the smallest free space included in the striped volume will determine.

  Read the article

• Used HDD/ran DiskSmartView/40,000 Power-on-hours?? should i trust it w/ my data, or take it back and bitch?

  - by David Lindsay

  I just bought a used hard drive from a University Surplus Store. Decided to run DiskSmartView to make sure it wasn't ready to fail. 40,000 power-on-hours I don't know if I feel like trusting my data to something that used. I really dont know if thats unreasonably old, but when i compare it to the POH reading i get when testing my other hdds its more than 3x older (my others have 2110 hours, 6150 hours, etc.. It's a Western Digital, so that gives me a little bit of hope(WDC WD4000KD-00NAB0). I could sure use someone else's opinion here. Thanks, DAVE

  Read the article

• NAS that supports NZB downloading for around £150 ($220) or less (without hard drive)

  - by Jigs

  I have seen a number of NAS's that are around that price, but I am worried that they may not be able to handle the processing of .rar files (I know that can be quite CPU intensive). Does anyone have any experiences with sabnzbd or hellanzb - or similar on their NAS? In terms of features the main requirement is NZB downloading - I am quite flexible on the other features. Wifi support would be nice, but not essential. Torrent downloading would also be nice. One disk drive would probably be enough. Easy installation of application would be nice... but again I am sure I can follow a tutorial.

  Read the article

• How do I restore a non-system hard drive using Time Machine under OSX?

  - by richardtallent

  I dropped one of the external drives on my Mac Pro and it started making noises... so I bought a replacement drive. No biggie, that's why I have Time Machine, right? So now that I have the new drive up and initialized, how do I actually restore the drive from backup? Time Machine is intuitive when it comes to restoring the system drive or restoring individual folders/files on the same literal device, but I'm a bit stuck in how to properly restore an entire drive that is not the boot drive. I saw one suggestion to use the same volume name as the old drive and then go into Time Machine. Haven't tried that since the information is unconfirmed. For now, I just went to the Time Machine volume, found the latest backup folder for that volume, and I'm copying the files via Finder. Of couse, I expect this to work just fine, but I feel like I'm missing something if that's the "proper" way to do this.

  Read the article

• HDD vanished after wakeup from standby

  - by Sam

  In my computer I got two hard drives: One 80GB Intel X25 Postville SSD for the system and a 1,5TB Sata HDD for data. When I put the system into standby, and wake it up again, roundabout 50% of the time the 1,5TB HDD is not found. It just vanished from the system (wreaking havok to all programs running which had open files on it). Even going into the system management and refreshing the drives does not find the lost HDD. There are no messages about this in the event log. After a warm reboot the hdd is found again, just like it should. The system is a Shuttle SP35P2 Pro with 8GB Ram and DualCore CPU, OS is Windows 7 Ultimate. I even set up the OS anew, didn't help. Any ideas what might cause this? How to debug, or maybe even fix it?

  Read the article

• Error in using DBAN on HDD

  - by John Watson

  I am using DBAN to erase HDD. DBAN is loaded from a CD and BIOS Boot order has been set to favour CD drive. On starting laptop, system boots from CD and DBAN interface can be seen. DBAN detects two storage devices, HDD and the SD Card. My HDD IS 320GB but DBAN says 298GB. It erases the SD card but when i try to erase HDD, it gives following error. DBAN finished with non-fatal errors. *ERROR /dev/sdb (process crash) *ERROR /dev/sda (process crash)

  Read the article

• Laptop HDD failure imminent?

  - by Andrei Rinea

  I have an HP Compaq 615 laptop with an 160 GB 7200 rpm HDD. Hasn't been dropped or shaken, in fact it almost always stayed on my desk. I've treated it as nice as I could. The other day, however, my OS froze and I could hear a repeated clink-clink-clink coming from the HDD zone of the laptop. I had to switch off hardware-ly the laptop and re-start it. It worked very well after, including now. However I backed up immediately the core data on my USB drive and ordered an external USB HDD for periodic backups. Will it die soon or it was just a "blip"?

  Read the article

• 1Tb disk formatted on Linux won't mount on windows nor mac

  - by Pedro MC

  I have an external HD (western digital) with 1Tb. I use Linux but I wanted to reserve a cross platform partition on the disk. I decided to create two partitions and used the "disks" application to do it. I created one partition with the LUKS (version 1) encryption and the other one, cross platform, in NTFS filesystem. Things work fine on my OS but when I try to use the disk (the cross platform partition) on both windows and mac the device is not recognized. What could it be? Next, output of "sfdisk -l /dev/sdb": Disk /dev/sdb: 121600 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/sdb1 0+ 36473- 36473- 292968750 83 Linux /dev/sdb2 36473+ 121600- 85128- 683789062+ 83 Linux /dev/sdb3 0 - 0 0 0 Empty /dev/sdb4 0 - 0 0 0 Empty

  Read the article

• DBan not working because disk has bad sectors? [migrated]

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• Defragment an Exchange Volume

  - by IceMage

  The Scenario: I use a dedicated volume (RAID volume) to store all of my data for my Exchange 2007 server. Today, out of curiosity, I decided to check up on how fragmented the files on this data volume were. To my surprise, the answer is extremely. So, a three part question: First and Foremost, SHOULD I defragment this volume (after a full backup of course)? Be specific as to why not if I should not, or reasons I absolutely should if I should. Second, about how much time should I allow for during this maintenance period per gigabyte. The drives are all 7200 RPM SATA drives on a Hardware RAID 5 controller (Perc 5i/6i, can't remember), the files are extremely fragmented. (Over 5000 file fragments per gigabyte). Third, is there something wrong here? It seems to me like the drive shouldn't be this fragmented. Could something be configured incorrectly that could be causing this to happen?

  Read the article

• Cannot see main user profile directory on old vista hdd on win7

  - by chaoskreator

  I have an old laptop HDD that ran Vista that I need to get some pictures and movies off of. I've attached it via SATA cable to my new Win 7 (64 bit) machine and it mounts fine, except I can't see the main user profile in the D:\Users directory. I've changed ownership and permissions for the D: drive to my C:\ Username but still no luck. I read something about it being caused by the UAC being active on the Vista machine. Is this true? Is there a way to disable this and gain access to the main profile without putting it back into the old laptop (it's fried and won't boot)?

  Read the article

• Windows 7 - swap file on a USB disk? [closed]

  - by Sara Cohen

  Possible Duplicate: How to move the page file to another physical disk location Windows 7 I was given temporarily a PC, running Windows 7 Ultimate. The problem is it's hard drive is full, there are like 250 MB free. The swap file is set to none. It has 4 GB RAM. When I load a few tabs in Chrome or IE and start a game it runs out of memory. I already emptied Recycle Bin, %temp%, etc. Deleting/moving user files or adding RAM is not an option. Now I have a USB 3 7200 RPM drive, it's connected to a USB 3 port and is really fast. Is there a way to create a swap file on that drive?

  Read the article

• HDD is not readable - can I fix this

  - by user1983017

  I have two HDD in my system, but today morning the additional hard disk is not readable. My all data are kept inside the additional HDD. When I disconnect the additional HDD from my system then system boot as usual, but when I connect HDD my system hangs Up in windows boot logo. Please note this problem is not related to HDD order. When I connect only the additional HDD then system shows this error: disk not readable press ctrl+alt+del to restart I can see the name of additional HDD in BIOS. When I connect both HDD i get a continues beep... beeep .. beep sound. Please tell me is my HDD gone dead ? How do I get the data back ? is there any kit for recovering HDD data ?

  Read the article

• Ubuntu issues when moving hard disk to new system

  - by Tim

  I'm working on a legacy project with a small single board computer running Ubuntu 10.04 on a compact flash card. I need to be able to save away a working image (via dd) and copy said image to other compact flash cards for use in other single board computers (with identical hardware) I'm able to copy the image to other flash cards and bootup on other systems no problem. But I'm seeing strange behavior. For instance, I can't use sudo on the new system (“sudo: must be setuid root”). I've gone down the path of trying to fix this, but have run into a slew of other issues. General question is: what do I need to be aware of when moving a hard disk containing Ubuntu (in my case a compact flash card) to another computer? I was hoping it would be seamless to Ubuntu since it's moving to a system with identical hardware. Is there something that needs to be done to make it "portable"?

  Read the article

• Test disk recovery

  - by AIB

  I had a 250GB hard disk having several NTFS partitions. The disk was a dynamic disk (created in windows). Now when I formatted windows (which was in another disk), the dynamic disk is shown as offline. I tried using the testdisk tool to recover the data and created a partial backup. Testdisk is able to list all partitions in the disk. All partitions are shown as type 'D' (Deleted). I want to change the 'D' to 'P' (Primary), 'L'(Logical), 'E' (Extended) appropriately and build a new partition table. If I can write the partition table to disk, the disk will be of 'basic' type and should be readable in all OS. What should be the appropriate partition types? I checked the files on the partitions and no OS was ound. So none of the partitions were bootable. Will randomly selecting P,L,E hurt the data in anyway?

  Read the article

• My C disk show 33gb less space then i have bcs of hidden or encrypted files i cant find

  - by Peter

  Hello I was hoping some one could help me my drive has 92gbs used space, 95gbs free out of 220 partition 33gbs in the air i cant find, already did cleanup, emptied recycle bin, history and temp files also and I believe sin Ive seen before its possibly space my brother used with a program he uses to hide (possibly encrypted) files dont know the name just seen him do it on usb and pc dont appear visible or hidden and result is what you read above is there any way of finding them to delete them hence my brother is nowhere to b found or could it be something else??? already tried freecommander also.

  Read the article

• New power supply and now HDDs are not recognized.

  - by Michael

  So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

  Read the article

• Lost HDD partition to clean command, testdisk unresponsive

  - by Sujay Anjankar

  I accidentally cleaned my external HDD by the clean command in Diskpart and got a full sized heart attack after that. I did some research and I have tried a number of tools already. To name a few: Testdisk Recuva Partition Find and mount Eassos Recovery I have even tried some other dumb sounding tools, but none of them could find the lost partition. They just show "no partition found". Testdisk shows Partition sector doesn't have the endmark 0xAA55. The file recovery softwares list the files, but none of them seem to be able to restore the lost partition. I need to recover the disk as it was. Any help would be much appreciated!

  Read the article

• Best way to Duplicate a Laptop's Hard Drive One-to-One

  - by Urda

  I have a Lenovo X61 Tablet computer, with a plain SATA drive inside. I have windows 7 and Ubuntu 9.10 dual booting on the computer. I want to back up both of these OS's, and their special partitions (Windows 7 has one, and of course the Linux Swap). I want a one-to-one backup, all of my mission critical data is already backed up, but I would like to get a snapshot, and store it on a larger file server at home for quick recovery. What is the best approach to do this?

  Read the article

• Ubuntu 12 Server messing up my hard disk

  - by Jeroen Jacobs

  I'm installing Ubuntu server on a disk with 12GB available. During the setup, I choose the default LVM-based partition layout. However for some reason, Ubuntu decides that it only wants to use 4GB of this disk. How do I reclaim the remaining space of the hard disk? "lvextent" doesn't work btw... output of df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 4.3G 3.4G 754M 82% / udev 3.9G 4.0K 3.9G 1% /dev tmpfs 1.6G 756K 1.6G 1% /run none 5.0M 0 5.0M 0% /run/lock none 3.9G 0 3.9G 0% /run/shm /dev/sda1 228M 25M 192M 12% /boot output of pvdisplay: --- Physical volume --- PV Name /dev/sda5 VG Name ubuntu PV Size 12.32 GiB / not usable 2.00 MiB Allocatable yes PE Size 4.00 MiB Total PE 3154 Free PE 8 Allocated PE 3146 PV UUID dD06RZ-kGcL-1tTX-Ruds-XIDG-ssMd-FIUkzZ my partitions: Device Boot Start End Blocks Id System /dev/sda1 * 2048 499711 248832 83 Linux /dev/sda2 501758 26343423 12920833 5 Extended /dev/sda5 501760 26343423 12920832 8e Linux LVM when I try lvextent, it says there is not enough diskspace.

  Read the article

• Causes of hard crashes on Windows XP and how to debug

  - by Sam Brightman

  I am occasionally seeing hard lockups on XP: totally unresponsive to keyboard/mouse, screen freezes at time of crash, no SSH/VNC possible. Very intermittent, nothing in the logs. I never see a blue screen on any kind of error message. This morning I logged in via VNC, logged out again, 20 minutes later physically sat at PC and it crashed around the time of VNC logout. I tend to suspect video cards in these kind of situations but it's a modern-ish card with modern drivers (one revision back, but this has been happening for 5 revisions or more) and normally would at least see a blue screen I expect. What would you suspect? Where can I look or what can I set up for more information? Bear in mind that this happens about once every 3 or 4 weeks, so extensive logging or intrusive monitoring isn't really an option.

  Read the article

• Recover Time Machine partition that turned MBR only instead of GUID

  - by alex

  I have one drive that has a NTFS partition, a TimeMachine partition (I guess HFS+) and empty space. The other day, I did one partition more from Windows 8 (bootcamp) and since then, I can't see the TimeMachine one from OSX, I can see it from Windows though. The problem is that TimeMachine uses a file system that Windows cannot browse, only shows some folders and I need to recover this partition because I have to use it to backup my Mac. On OSX I can only see the NTFS partition and the other one appears unmounted and it's impossible to mount. I've come to the conclusion that something has happened to the partition table. With TestDisk it shows that it's MBR only when I think it should be GUID: And pressing p shows that it's FDisk_partition_scheme and the TimeMachine one appears as Windows_NTFS. I found this thread that is similar to what it's happening to me: Adding NTFS partition to disk in Windows makes HFS+ partition on same disk invisible in Mac OS X

  Read the article

< Previous Page | 112 113 114 115 116 117 118 119 120 121 122 123  | Next Page >