Search Results

Search found 15926 results on 638 pages for 'business card'.

Page 117/638 | < Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >

• Can you boot an Acer Aspire One from an SD card when no BIOS is available?

  - by henrijs

  Is it possible to boot the Acer Aspire One PC from an SD card? I have bricked an Aspire One, but it does not even start the BIOS. Aspire One have this issue and a BIOS update usually work and it helped me once in the past, but this time it's all over, and the BIOS update fails. It still reads the SD card with the magic Ctrl + Esc shortcut used to launch the BIOS update. Can I trick the computer into booting somehow using this shortcut?

  Read the article

• Is it possible to connect an internal USB 3 card reader in a computer with only USB 2?

  - by Grzenio

  I would like to buy an internal flash card reader. There are now loads of USB 3 reader, however I still have an USB 2 system. Would it be possible to connect the new reader to the old USB port on the motherboard? I understand that I will not be able to take advantage of having the faster reader with the old motherboard, but I am planning an upgrade next year and I would like to avoid having to upgrade the card reader as well...

  Read the article

• Can I boot my notebook via eSata pci-xpress card?

  - by OliverS

  I would like to boot directly from an external hard disk to improve performance over my internal notebook hard disk. My notebook has no native eSata jack but a pci express card. As my BIOS doesn't support the card on boot time so no way directly booting it. My question is, is it possible to work around this issue by using an USB stick or similar with a boot loader like grub and if so, will this only work for Linux or Windows as well?

  Read the article

• Windows XP maximum memory - reduced by graphics card memory?

  - by John C

  I've seen occasional references that claimed a graphics card's video memory was part of Windows XP's memory address space - is that true? If you have 4GB on an XP system, and add a 1GB graphics card, does that mean Windows only has 3GB for programs?

  Read the article

• client problems - misaligned expectations & not following SDLC protocols

  - by louism

  hi guys, im having some serious problems with a client on a project - i could use some advice please the short version i have been working with this client now for almost 6 months without any problems (a classified website project in the range of 500 hours) over the last few days things have drastically deteriorated to the point where ive had to place the project on-hold whilst i work-out what to do (this has pissed the client off even more) to be simplistic, the root cause of the issue is this: the client doesnt read the specs i make for him, i code the feature, he than wants to change things, i tell him its not to the agreed spec and that that change will have to be postponed and possibly charged for, he gets upset and rants saying 'hes paid for the feature' and im not keeping to the agreement (<- misalignment of expectations) i think the root cause of the root cause is my clients failure to take my SDLC protocols seriously. i have a bug tracking system in place which he practically refuses to use (he still emails me bugs), he doesnt seem to care to much for the protocols i use for dealing with scope creep and change control the whole situation came to a head recently where he 'cracked it' (an aussie term for being fed-up). the more terms like 'postponed for post-launch implementation', 'costed feature addition', and 'not to agreed spec' i kept using, the worse it got finally, he began to bully me - basically insisting i shut-up and do the work im being paid for. i wrote a long-winded email explaining how wrong he was on all these different points, and explaining what all the SDLC protocols do to protect the success of the project. than i deleted that email and wrote a new one in the new email, i suggested as a solution i write up a list of grievances we both had. we than review the list and compromise on different points: he gets some things he wants, i get some things i want. sometimes youve got to give ground to get ground his response to this suggestion was flat-out refusal, and a restatement that i should just get on with the work ive been paid to do so there you have the very subjective short version. if you have the time and inclination, the long version may be a little less bias as it has the email communiques between me and my client the long version (with background) the long version works by me showing you the email communiques which lead to the situation coming to a head. so here it is, judge for yourself where the trouble started... 1. client asked me why something was missing from a feature i just uploaded, my response was to show him what was in the spec: it basically said the item he was looking for was never going to be included 2. [clients response...] Memo Louis, We are following your own title fields and keeping a consistent layout. Why the big fuss about not adding "Part". It simply replaces "model" and is consistent with your current title fields. 3. [my response...] hi [client], the 'part' field appeared to me as a redundancy / mistake. i requested clarification but never received any in a timely manner (about 2 weeks ago) the specification for this feature also indicated it wasnt going to be included: RE: "Why the big fuss about not adding "Part" " it may not appear so, but it would actually be a lot of work for me to now add a 'Part' field it could take me up to 15-20 minutes to properly explain why its such a big undertaking to do this, but i would prefer to use that time instead to work on completing your v1.1 features as a simplistic explanation - it connects to the change in paradigm from a 'generic classified ad' model to a 'specific attributes for specific categories' model basically, i am saying it is a big fuss, but i understand that it doesnt look that way - after all, it is just one ity-bitty field :) if you require a fuller explanation, please let me know and i will commit the time needed to write that out also, if you recall when we first started on the project, i said that with the effort/time required for features, you would likely not know off the top of your head. you may think something is really complex, but in reality its quite simple, you might think something is easy - but it could actually be a massive trauma to code (which is the case here with the 'Part' field). if you also recalled, i said the best course of action is to just ask, and i would let you know on a case-by-case basis 4. [email from me to client...] hi [client], the online catalogue page is now up live (see my email from a few days ago for information on how it works) note: the window of opportunity for input/revisions on what data the catalogue stores has now closed (as i have put the code up live now) RE: the UI/layout of the online catalogue page you may still do visual/ui tweaks to the page at the moment (this window for input/revisions will close in a couple of days time) 5. [email from client to me...] *(note: i had put up the feature & asked the client to review it, never heard back from them for a few days)* Memo Louis, Here you go again. CLOSED without a word of input from the customer. I don't think so. I will reply tomorrow regarding the content and functionality we require from this feature. 5. [from me to client...] hi [client]: RE: from my understanding, you are saying that the mini-sale yard control would change itself based on the fact someone was viewing for parts & accessories <- is that correct? this change is outside the scope of the v1.1 mini-spec and therefore will need to wait 'til post launch for costing/implementation 6. [email from client to me...] Memo Louis, Following your v1.1 mini-spec and all your time paid in full for the work selected. We need to make the situation clear. There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon. You have undertaken to complete the Parts and accessories feature as follows. Obviously, as part of this process the "mini search" will be effected, and will require "adaption to make sense". 7. [email from me to client...] hi [client], RE: "There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon." a few points to consider: 1) the specification for the 'parts & accessories' feature was as follows: (i.e. [what] "...we have agreed upon.") 2) you have received the 'parts & accessories' feature free of charge (you have paid $0 for it). ive spent two days coding that feature as a gesture of good will i would request that you please consider these two facts carefully and sincerely 8. [email from client to me...] Memo Louis, I don't see how you are giving us anything for free. From your original fee proposal you have deleted more than 30 hours of included features. Your title "shelved features". Further you have charged us twice by adding back into the site, at an addition cost, some of those "shelved features" features. See v1.1 mini-spec. Did include in your original fee proposal a change request budget but then charge without discussion items included in v1.1 mini-spec. Included a further Features test plan for a regression test, a fee of 10 hours that would not have been required if the "shelved features" were not left out of the agreed fee proposal. I have made every attempt to satisfy your your uneven business sense by offering you everything your heart desired, in the v1.1 mini-spec, to be left once again with your attitude of "its too hard, lets leave it for post launch". I am no longer accepting anything less than what we have contracted you to do. That is clearly defined in v1.1 mini-spec, and you are paid in advance for delivering those items as an acceptable function. a few notes about the above email... i had to cull features from the original spec because it didnt fit into the budget. i explained this to the client at the start of the project (he wanted more features than he had budget hours to do them all) nothing has been charged for twice, i didnt charge the client for culled features. im charging him to now do those culled features the draft version of the project schedule included a change request budget of 10 hours, but i had to remove that to meet the budget (the client may not have been aware of this to be fair to them) what the client refers to as my attitude of 'too hard/leave it for post-launch', i called a change request protocol and a method for keeping scope creep under control 9. [email from me to client...] hi [client], RE: "...all your grievances..." i had originally written out a long email response; it was fantastic, it had all these great points of how 'you were wrong' and 'i was right', you would of loved it (and by 'loved it', i mean it would of just infuriated you more) so, i decided to deleted it start over, for two reasons: 1) a long email is being disrespectful of your time (youre a busy businessman with things to do) 2) whos wrong or right gets us no closer to fixing the problems we are experiencing what i propose is this... i prepare a bullet point list of your grievances and my grievances (yes, im unhappy too about how things are going - and it has little to do with money) i submit this list to you for you to add to as necessary we then both take a good hard look at this list, and we decide which areas we are willing to give ground on as an example, the list may look something like this: "louis, you keep taking away features you said you would do" [your grievance 2] [your grievance 3] [your grievance ...] "[client], i feel you dont properly read the specs i prepare for you..." [my grievance 2] [my grievance 3] [my grievance ...] if you are willing to give this a try, let me know will it work? who knows. but if it doesnt, we can always go back to arguing some more :) obviously, this will only work if you are willing to give it a genuine try, and you can accept that you may have to 'give some ground to get some ground' what do you think? 10. [email from client to me ...] Memo Louis, Instead of wasting your time listing grievances, I would prefer you complete the items in v1.1 mini-spec, to a satisfactory conclusion. We almost had the website ready for launch until you brought the v1.1 mini-spec into the frame. Obviously I expected you could complete the v1.1 mini-spec in a two-week time frame as you indicated and give the site a more profession presentation. Most of the problems have been caused by you not following our instructions, but deciding to do what you feel like at the time. And then arguing with us how the missing information is not necessary. For instance "Parts and Accessories". Why on earth would you leave out the parts heading, when it ties-in with the fields you have already developed. It replaces "model" and is just as important in the context of information that appears in the "Details" panel. We are at a stage where the the v1.1 mini-spec needs to be completed without further time wasting and the site is complete (subject to all features working). We are on standby at this end to do just that. Let me know when you are back, working on the site and we will process and complete each v1.1 mini-spec, item by item, until the job is complete. 11. [last email from me to client...] hi [client], based on this reply, and your demonstrated unwillingness to compromise/give any ground on issues at hand, i have decided to place your project on-hold for the moment i will be considering further options on how to over-come our challenges over the next few days i will contact you by monday 17/may to discuss any new options i have come up with, and if i believe it is appropriate to restart work on your project at that point or not told you it was long... what do you think?

  Read the article

• You Need BRM When You have EBS – and Even When You Don’t!

  - by bwalstra

  Here is a list of criteria to test your business-systems (Oracle E-Business Suite, EBS) or otherwise to support your lines of digital business - if you score low, you need Oracle Billing and Revenue Management (BRM). Functions Scalability High Availability (99.999%) Performance Extensibility (e.g. APIs, Tools) Upgradability Maintenance Security Standards Compliance Regulatory Compliance (e.g. SOX) User Experience Implementation Complexity Features Customer Management Real-Time Service Authorization Pricing/Promotions Flexibility Subscriptions Usage Rating and Pricing Real-Time Balance Mgmt. Non-Currency Resources Billing & Invoicing A/R & G/L Payments & Collections Revenue Assurance Integration with Key Enterprise Applications Reporting Business Intelligence Order & Service Mgmt (OSM) Siebel CRM E-Business Suite On-/Off-line Mediation Payment Processing Taxation Royalties & Settlements Operations Management Disaster Recovery Overall Evaluation Implementation Configuration Extensibility Maintenance Upgradability Functional Richness Feature Richness Usability OOB Integrations Operations Management Leveraging Oracle Technology Overall Fit for Purpose You need Oracle BRM: Built for high-volume transaction processing Monetizes any service or event based on any metric Supports high-volume usage rating, pricing and promotions Provides real-time charging, service authorization and balance management Supports any account structure (e.g. corporate hierarchies etc.) Scales from low volumes to extremely high volumes of transactions (e.g. billions of trxn per hour) Exposes every single function via APIs (e.g. Java, C/C++, PERL, COM, Web Services, JCA) Immediate Business Benefits of BRM: Improved business agility and performance Supports the flexibility, innovation, and customer-centricity required for current and future business models Faster time to market for new products and services Supports 360 view of the customer in real-time – products can be launched to targeted customers at a record-breaking pace Streamlined deployment and operation Productized integrations, standards-based APIs, and OOB enablement lower deployment and maintenance costs Extensible and scalable solution Minimizes risk – initial phase deployed rapidly; solution extended and scaled seamlessly per business requirements Key Considerations Productized integration with key Oracle applications Lower integration risks and cost Efficient order-to-cash process Engineered solution – certification on Exa platform Exadata tested at PayPal in the re-platforming project Optimal performance of Oracle assets on Oracle hardware Productized solution in Rapid Offer Design and Order Delivery Fast offer design and implementation Significantly shorter order cycle time Productized integration with Oracle Enterprise Manager Visibility to system operability for optimal up time

  Read the article

• OBIEE 11g 11.1.1.6.11 is Available For BI Enterprise and Exalytics

  - by p.anda

  (in via Ian & Martin) OBIEE 11g 11.1.1.6.11 is Available For BI Enterprise and Exalytics The Business Intelligence Enterprise Edition 11.1.1.6.11 patch set has been released and is available to download from My Oracle Support (https://support.oracle.com).Per the patch readme: This patch set is available for all customers who are using Oracle Business Intelligence Enterprise Edition 11.1.1.6.0, 11.1.1.6.1, 11.1.1.6.2, 11.1.1.6.2 BP1, 11.1.1.6.4, 11.1.1.6.5, 11.1.1.6.6, 11.1.1.6.7, 11.1.1.6.8, 11.1.1.6.9 and 11.1.1.6.10. Oracle Exalytics customers must only install this Oracle Business Intelligence patch set if it is certified for the specific Oracle Exalytics patch or patch set update that they are applying. For more information see Oracle Fusion Middleware Installation and Administration Guide for Oracle Exalytics In-Memory Machine and the Oracle Exalytics certification information. The Oracle Business Intelligence 11.1.1.6.11 patch set is comprised of the following patches: Patch 16747681 - 1 of 7 Oracle Business Intelligence Installer (BIINST)Patch 16747684 - 2 of 7 Oracle Real Time Decisions (RTD)Patch 16747692 - 3 of 7 Oracle Business Intelligence Publisher (BIP)Patch 16747699 - 4 of 7 Oracle Business Intelligence ADF Components (BIADFCOMPS)Patch 16747703 - 5 of 7 Enterprise Performance Management Components Installed from BI Installer 11.1.1.6.x (BIFNDNEPM)Patch 16717325 - 6 of 7 Oracle Business Intelligence: (OBIEE)Patch 16747708 - 7 of 7 Oracle Business Intelligence Platform Client Installers and MapViewer Note: - The Readme files for the above patches describe the bugs fixed in each patch, and any known bugs with the patch.- This patch is cumulative, and therefore, contains all of the fixes included in the earlier 11.1.1.6.2, 11.1.1.6.4, 11.1.1.6.5, 11.1.1.6.6, 11.1.1.6.7, 11.1.1.6.8, 11.1.1.6.9 and 11.1.1.6.10 patch sets.- However, lists of fixes from included patch sets need to be looked up in the respective patches' readme files, and are not included in the above patches' readme files.- The instructions to apply the above patches are identical, and are contained in the readme file for patch 16747681.- Please bear in mind, that the readme states to apply patch 13952743 for JDeveloper, too.

  Read the article

• Why doesn't my graphic card software support 1280*1024?

  - by Allwar

  Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. When I force it I only force the external monitor, the laptop is already at maximum 1366*768. I connect it throw VGA. ((The graphic card supports 1280*1024 in windows 7, #Fail)) alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• Do I need a wifi card to have internet access?

  - by Sarah

  I am attempting to set up a wireless network on 11.04, freshly download today. The router is on and working. However, I do not have a wifi "card" (which I am assuming is a little USB-type thing that allows internet access, but correct me if I am wrong) and every time I try to type in the MAC address and everything, nothing works. I also get the "firmware missing" error when I scroll over the signal strength, which I have tried looking up but have been unsuccessful with completely understanding it. I guess my main question is do I need another little device to be able to use wifi on my ubuntu? I do have an ethernet cable but another person is using it and I do not want to be tied down to that cable. the problem is that none of the wireless networks show up, however they show up when I go into Windows mode on my laptop. I get an error message at the top saying "firmware missing" which I have tried looking up but still have no straight answer for.

  Read the article

• Having a Proactive Patch Plan is the way to Go!

  - by user793553

  BUILDING A SUCCESSFUL PATCHING STRATEGY Make Patching Easy! Having a Patching Strategy for your E-Business Suite system is a great way to manage your system downtime, identify the proper resources needed to perform the necessary task and familiarizing yourself with the Patching Tools in EBS. Having a Proactive Patch Plan is the way to Go! Proactive Patching is a preventive measure allowing you to have a complete patching strategy when applying patches periodically. Oracle provides several tools to help you get started to set the foundation for a solid and proactive patching strategy in Note 313.1 - "Patching & Maintenance Advisor: E-Business Suite 11i and R12". It details all the steps and tooling available for the patching strategy along with the benefits. Among other things it covers the following: How to plan ahead for system downtime Patching Tools in E-Business Suite (Autopatch, OUI, OPatch) How to Identify Patches (RUPs, EBS Family Packs, Critical Patch Updates, etc) How to properly test your patching plan and move to Production Make sure you visit the New E-Business Patching Community! We encourage you to access the "E-Business Patching Community" prior to applying an E-Business Suite patch. Doing so will allow you to explore perspectives shared by industry peers, get real-world experiences with the patch, and benefit from known solutions and lessons learned. Additionally, Oracle Support engineers monitor discussion topics to help provide guidance and solutions for your E-Business Suite patching needs. This is a valuable opportunity to "Get Proactive" with the patching and maintenance of your E-Business Suite environment. Start now, and find fast, proactive resolutions before you begin. Related Articles: What's the Best Way to Patch an E-Business Suite Environment? Patch Wizard Utility

  Read the article

• Mapping Your Customer Experience Journey

  - by Michael Hylton

  For those who attended today’s Oracle Customer Experience Summit keynote you heard from Brian Curran talk about the strategies and best practices to implement customer experience (CX) in your organization.  He spoke about how this evolving journey begins by understanding six steps to transform your business and put your customers front and center.  Here are those key six steps: What are the strategic business objectives in your company? What are your operational objectives and KPIs necessary to measure a CX project? Build an income statement and create “what if” scenarios and see how changes impact your business’ bottom line.  Explore what keeps you from getting to your own goals for your business. Define the business objectives and opportunities you want to meet? Understand the trends and accelerators in the market?  What factors are going on in the market affect that impact your business?  Social?  Mobile?  Cloud?  Just to name a few.  Many of these trends may signal a change in the way people think about your business. What approach will you take to solve these issues?  Understand who your customer is.  How do you need to adapt your business to build relevant, personalized customer experiences. What technologies can you implement to address CX?  Does technology help you solve your problem? A great way to begin your customer experience journey is a concept called journey mapping, one of the most powerful and deceptively simple tools for unlocking CX innovation at your organization. Here is where you can learn more about how you can bring this concept into your business to drive great customer experiences.

  Read the article

• Domain Specific Software Engineering (DSSE)

  Domain Specific Software Engineering (DSSE) believes that creating every application from nothing is not advantageous when existing systems can be leveraged to create the same application in less time and with less cost.  This belief is founded in the idea that forcing applications to recreate exiting functionality is unnecessary. Why would we build a better wheel when we already have four really good and proven wheels? DSSE suggest that we take an existing wheel and just modify it to fit an existing need of a system. This allows developers to leverage existing codebases so that more time and expense are focused on creating more usable functionality compared to just creating more functionality. As an example, how many functions do we need to create to send an email when one can be created and used by all other applications within the existing domain? Key Factors of DSSE Domain Technology Business A Domain in DSSE is used to control the problem space for a project. This control allows for applications to be developed within specific constrains that focus development is to a specific direction.Technology in DSSE offers a variety of technological solutions to be applied within a domain. Technology Examples: Tools Patterns Architectures & Styles Legacy Systems Business is the motivator for any originations to use DSSE in there software development process. Business reason to use DSSE: Minimize Costs Maximize market and Profits When these factors are used in combination additional factors and benefits can be found. Result of combining Key Factors of DSSE Domain + Business  = Corporate Core Competencies Domain expertise improved by market and business expertise Domain + Technology = Application Family Architectures All possible technological solutions to problems in a domain without any business constraints.  Business + Technology =  Domain independent infrastructure Tools and techniques for building systems  independent of all domains  Domain + Business + Technology = Domain-specific software engineering Applies technology to domain related goals in the context of business and market expertise

  Read the article

• Will 3D games run in a VirtualBox4-hosted Windows system under Ubuntu with Intel GMA X4500HD card?

  - by Ivan

  I've just got a laptop with Intel GMA X4500HD card (which is said to be DirectX10-compliant, while my previous laptop had Intel 82852/855GM and no chance to play modern 3D games at all). It would be nice if I could play some games (like HalfLife 2, StarCraft 2, Fallout 3) from time to time (while I am ok using lo-fi settings and having low performance) but as I strongly prefer Ubuntu environment and don't need Windows usually I'd like to install Windows inside VirtualBox instead of using a dedicated partition and dual-boot. So the question is if VirtualBox can use 3D acceleration of Intel GMA X4500HD if run on Ubuntu.

  Read the article

• Why does Ubuntu Freezes on ASUS K42DY laptop with RADEON HD6470M Graphics Card?

  - by ix3

  Hi,I have an ASUS K42DY laptop with AMD Phenom II x2, 8 GB Ram , 500 GB Hard Drive and has a didicated ATI RADEON HD 6470M Graphics Card and I'm running Ubuntu 12.04 LTS 64bit on it. I have installed GNOME 3 and also followed this Make Ubuntu look like Mac OS X. I have also installed apps from the software center, getdeb & playdeb all of which worked fine. However, I noticed that Ubuntu freezes after inactivity let's say 1-3hrs. I have already set power setting to never standby or hibernate. This is completely annoying because all I can do is log-out via ctrl+alt+del or manually shut down and reboot my laptop. What should I do? By the way, this happens on all shells Unity, Gnome (even with the basic) and Cairo Dock.I set Swap Space at 8GB during installation. Any help will be appreciated. Thanks!

  Read the article

• EBS 11i ? 12.1 ???????

  - by Steve He(???)

  Oracle?????2???Oracle E-Business Suite?????????????????? EBS  11i ? 12.1??? ???????My Oracle Support ??: E-Business Suite 11.5.10 Sustaining Support Exception & 12.1 Extended Support Now to Dec. 2018 (Note 1495337.1) 1. ?EBS 11i Sustaining Support(????)??? ???????Oracle E-Business Suite Release 11.5.10 (11i10)????????13????????,????2013?12?1??2014?12?31?December 1, 2013?????????3???: ?????1???????? United States Form 1099 2013 ???? ?United States, Canada, United Kingdom, ?Australia???2014????Payroll regulatory ?? ????????????????,???????1????????,????? : Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 (Note 883202.1) 2. ?EBS 12.1 Extended Support(????)??? ?????:  ?E-Business Suite Release 12.1????????19???2018?12???????????????Premier Support????????E-Business Suite 12.1? Extended Support(????)? ????:  ?????????????Premier Support??,??Extended Support??????( 2014?6??2018?12?)????????????????,?????????????????? ?????????? ?2?????????E-Business Suite:  Oracle???????, ?????????(???????????)? ??????????,???: Understanding Support Windows for E-Business Suite Releases ???? Extended Support Fees Waived for E-Business Suite 11i and 12.0 EBS 12.0 Minimum Requirements for Extended Support Finalized

  Read the article

• How to set up dual quadro cards on RHEL 5.5?

  - by Alex J. Roberts

  I have a RHEL 5 workstation with 2 nvidia Quadro FX4500 cards, with one display attached to each card. After doing a clean install of RHEL 5.5, the second display doesnt work (it worked ok in RHEL 5.2). Neither separate X screens nor Xinerama are working. The kernel version is 2.6.18-194.el5 I've tried nvidia drivers 185.18.36 (the ones that i was using on 5.2) and the latest 260.19.36 and neither works. My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister@builder58) Fri Aug 14 18:34:43 PDT 2009 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" FontPath "unix/:7100" EndSection Section "ServerFlags" Option "Xinerama" "1" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from data in "/etc/sysconfig/keyboard" Identifier "Keyboard0" Driver "kbd" Option "XkbLayout" "us" Option "XkbModel" "pc105" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 3007WFP" HorizSync 49.3 - 98.5 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:10:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 4500" BusID "PCI:129:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection And the Xorg Log: X Window System Version 7.1.1 Release Date: 12 May 2006 X Protocol Version 11, Revision 0, Release 7.1.1 Build Operating System: Linux 2.6.18-164.11.1.el5 x86_64 Red Hat, Inc. Current Operating System: Linux blur.svsdsde 2.6.18-194.el5 #1 SMP Tue Mar 16 21:52:39 EDT 2010 x86_64 Build Date: 06 March 2010 Build ID: xorg-x11-server 1.1.1-48.76.el5 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 18 09:52:08 2011 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Layout0" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Device0" (**) |-->Screen "Screen1" (1) (**) | |-->Monitor "Monitor1" (**) | |-->Device "Device1" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Mouse0" (**) FontPath set to: unix/:7100 (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib64/xorg/modules" (**) Option "Xinerama" "1" (**) Xinerama: enabled (==) Max clients allowed: 512, resource mask: 0xfffff (II) Open ACPI successful (/var/run/acpid.socket) (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.0 X.Org XInput driver : 0.6 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/lib64/xorg/modules/fonts/libbitmap.so (II) Module bitmap: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/lib64/xorg/modules/libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.0 (++) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,005e card 103c,1500 rev a3 class 05,80,00 hdr 00 (II) PCI: 00:01:0: chip 10de,0051 card 103c,1500 rev a3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,0052 card 103c,1500 rev a2 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,005a card 103c,1500 rev a2 class 0c,03,10 hdr 80 (II) PCI: 00:02:1: chip 10de,005b card 103c,1500 rev a3 class 0c,03,20 hdr 80 (II) PCI: 00:04:0: chip 10de,0059 card 103c,1500 rev a2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,0053 card 103c,1500 rev f2 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10de,0054 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:08:0: chip 10de,0055 card 103c,1500 rev f3 class 01,01,85 hdr 00 (II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev a2 class 06,04,01 hdr 01 (II) PCI: 00:0a:0: chip 10de,0057 card 103c,1500 rev a3 class 06,80,00 hdr 00 (II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01 (II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 00:19:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80 (II) PCI: 05:05:0: chip 104c,8023 card 103c,1500 rev 00 class 0c,00,10 hdr 00 (II) PCI: 0a:00:0: chip 10de,009d card 10de,02af rev a1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:9:0), (0,5,5), BCTRL: 0x0206 (VGA_EN is cleared) (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf5000000 - 0xf50fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 10: bridge is at (0:14:0), (0,10,10), BCTRL: 0x000a (VGA_EN is set) (II) Bus 10 I/O range: [0] -1 0 0x00003000 - 0x00003fff (0x1000) IX[B] (II) Bus 10 non-prefetchable memory range: [0] -1 0 0xf3000000 - 0xf4ffffff (0x2000000) MX[B] (II) Bus 10 prefetchable memory range: [0] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B] (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:24:0), (0,0,10), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] (--) PCI:*(10:0:0) nVidia Corporation Quadro FX 4500 rev 161, Mem @ 0xf3000000/24, 0xc0000000/28, 0xf4000000/24, I/O @ 0x3000/7 (II) Addressable bus resource ranges are [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B] [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) Active PCI resource ranges after removing overlaps: [0] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [1] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [...snipped... post too long] [28] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [29] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) LoadModule: "extmod" (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so (II) Module extmod: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) Loading extension X-Resource (II) LoadModule: "dbe" (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so (II) Module dbe: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "glx" (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so (II) Module glx: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Server Extension (II) NVIDIA GLX Module 185.18.36 Fri Aug 14 18:27:24 PDT 2009 (II) Loading extension GLX (II) LoadModule: "freetype" (II) Loading /usr/lib64/xorg/modules/fonts/libfreetype.so (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project" compiled for 7.1.1, module version = 2.1.0 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font FreeType (II) LoadModule: "type1" (II) Loading /usr/lib64/xorg/modules/fonts/libtype1.so (II) Module type1: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.2 Module class: X.Org Font Renderer ABI class: X.Org Font Renderer, version 0.5 (II) Loading font Type1 (II) LoadModule: "record" (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so (II) Module record: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.13.0 Module class: X.Org Server Extension ABI class: X.Org Server Extension, version 0.3 (II) Loading extension RECORD (II) LoadModule: "dri" (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so (II) Module dri: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/lib64/xorg/modules/linux/libdrm.so (II) Module drm: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org Server Extension, version 0.3 (II) Loading extension XFree86-DRI (II) LoadModule: "nvidia" (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so (II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (II) LoadModule: "kbd" (II) Loading /usr/lib64/xorg/modules/input/kbd_drv.so (II) Module kbd: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.0 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) LoadModule: "mouse" (II) Loading /usr/lib64/xorg/modules/input/mouse_drv.so (II) Module mouse: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.1.1 Module class: X.Org XInput Driver ABI class: X.Org XInput driver, version 0.6 (II) NVIDIA dlloader X Driver 185.18.36 Fri Aug 14 17:51:02 PDT 2009 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs (II) Primary Device is: PCI 0a:00:0 (--) Chipset NVIDIA GPU found (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/lib64/xorg/modules/libfb.so (II) Module fb: vendor="X.Org Foundation" compiled for 7.1.1, module version = 1.0.0 ABI class: X.Org ANSI C Emulation, version 0.3 (II) Loading sub module "wfb" (II) LoadModule: "wfb" (II) Loading /usr/lib64/xorg/modules/libwfb.so (II) Module wfb: vendor="NVIDIA Corporation" compiled for 7.1.99.2, module version = 1.0.0 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/lib64/xorg/modules/libramdac.so (II) Module ramdac: vendor="X.Org Foundation" compiled for 7.1.1, module version = 0.1.0 ABI class: X.Org Video Driver, version 1.0 (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [18] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [19] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [20] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [21] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [22] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [23] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [24] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [25] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [26] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [27] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [28] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [29] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [30] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [31] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [32] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [33] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [34] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [35] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) (II) resource ranges after probing: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "TwinView" "0" (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0" (**) NVIDIA(0): Enabling RENDER acceleration (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) NVIDIA(0): enabled. (II) NVIDIA(0): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:10:0:0 (GPU-0) (--) NVIDIA(0): Memory: 524288 kBytes (--) NVIDIA(0): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(0): Detected PCI Express Link width: 16X (--) NVIDIA(0): Interlaced video modes are supported on this GPU (--) NVIDIA(0): Connected display device(s) on Quadro FX 4500 at PCI:10:0:0: (--) NVIDIA(0): DELL 3007WFP (DFP-0) (--) NVIDIA(0): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(0): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Assigned Display Device: DFP-0 (II) NVIDIA(0): Validated modes: (II) NVIDIA(0): "nvidia-auto-select+0+0" (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1600 (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config (--) NVIDIA(0): option (WW) NVIDIA(0): UBB is incompatible with the Composite extension. Disabling (WW) NVIDIA(0): UBB. (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0xf5000000 - 0xf5003fff (0x4000) MX[B] [5] -1 0 0xf5004000 - 0xf50047ff (0x800) MX[B] [6] -1 0 0xf5104000 - 0xf5104fff (0x1000) MX[B] [7] -1 0 0xf5103000 - 0xf5103fff (0x1000) MX[B] [8] -1 0 0xf5102000 - 0xf5102fff (0x1000) MX[B] [9] -1 0 0xf5101000 - 0xf5101fff (0x1000) MX[B] [10] -1 0 0xfebf0000 - 0xfebf00ff (0x100) MX[B] [11] -1 0 0xf5100000 - 0xf5100fff (0x1000) MX[B] [12] -1 0 0xf4000000 - 0xf4ffffff (0x1000000) MX[B](B) [13] -1 0 0xc0000000 - 0xcfffffff (0x10000000) MX[B](B) [14] -1 0 0xf3000000 - 0xf3ffffff (0x1000000) MX[B](B) [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [20] -1 0 0x000048f0 - 0x000048f7 (0x8) IX[B] [21] -1 0 0x000048c0 - 0x000048cf (0x10) IX[B] [22] -1 0 0x00004c04 - 0x00004c07 (0x4) IX[B] [23] -1 0 0x000048e8 - 0x000048ef (0x8) IX[B] [24] -1 0 0x00004c00 - 0x00004c03 (0x4) IX[B] [25] -1 0 0x000048e0 - 0x000048e7 (0x8) IX[B] [26] -1 0 0x000048b0 - 0x000048bf (0x10) IX[B] [27] -1 0 0x000048fc - 0x000048ff (0x4) IX[B] [28] -1 0 0x000048d8 - 0x000048df (0x8) IX[B] [29] -1 0 0x000048f8 - 0x000048fb (0x4) IX[B] [30] -1 0 0x000048d0 - 0x000048d7 (0x8) IX[B] [31] -1 0 0x000048a0 - 0x000048af (0x10) IX[B] [32] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [33] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [34] -1 0 0x00004840 - 0x0000487f (0x40) IX[B] [35] -1 0 0x00004800 - 0x0000483f (0x40) IX[B] [36] -1 0 0x00004880 - 0x0000489f (0x20) IX[B] [37] -1 0 0x0000fb00 - 0x0000fbff (0x100) IX[B] [38] -1 0 0x00003000 - 0x0000307f (0x80) IX[B](B) [39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [40] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) NVIDIA(GPU-1): NVIDIA GPU Quadro FX 4500 (G70GL) at PCI:129:0:0 (GPU-1) (--) NVIDIA(GPU-1): Memory: 524288 kBytes (--) NVIDIA(GPU-1): VideoBIOS: 05.70.02.41.01 (II) NVIDIA(GPU-1): Detected PCI Express Link width: 16X (--) NVIDIA(GPU-1): Interlaced video modes are supported on this GPU (--) NVIDIA(GPU-1): Connected display device(s) on Quadro FX 4500 at PCI:129:0:0: (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0) (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): 310.0 MHz maximum pixel clock (--) NVIDIA(GPU-1): DELL 3007WFP (DFP-0): Internal Dual Link TMDS (II) NVIDIA(0): Initialized GPU GART. (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Loading extension NV-GLX (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized (==) NVIDIA(0): Disabling shared memory pixmaps (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture (==) NVIDIA(0): Backing store disabled (==) NVIDIA(0): Silken mouse enabled (**) Option "dpms" (**) NVIDIA(0): DPMS enabled (II) Loading extension NV-CONTROL (==) RandR enabled (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFIXES (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (II) Initializing built-in extension RANDR (II) Initializing built-in extension COMPOSITE (II) Initializing built-in extension DAMAGE (II) Initializing built-in extension XEVIE (II) Initializing extension GLX (WW) Disabling Composite since Xinerama is enabled (**) Option "CoreKeyboard" (**) Keyboard0: Core Keyboard (**) Option "Protocol" "standard" (**) Keyboard0: Protocol: standard (**) Option "AutoRepeat" "500 30" (**) Option "XkbRules" "xorg" (**) Keyboard0: XkbRules: "xorg" (**) Option "XkbModel" "pc105" (**) Keyboard0: XkbModel: "pc105" (**) Option "XkbLayout" "us" (**) Keyboard0: XkbLayout: "us" (**) Option "CustomKeycodes" "off" (**) Keyboard0: CustomKeycodes disabled (**) Option "Protocol" "auto" (**) Mouse0: Device: "/dev/input/mice" (**) Mouse0: Protocol: "auto" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/input/mice" (**) Option "Emulate3Buttons" "no" (**) Option "ZAxisMapping" "4 5" (**) Mouse0: ZAxisMapping: buttons 4 and 5 (**) Mouse0: Buttons: 9 (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) (--) Mouse0: PnP-detected protocol: "ExplorerPS/2" (II) Mouse0: ps2EnableDataReporting: succeeded (II) Open ACPI successful (/var/run/acpid.socket) (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0" (II) Mouse0: ps2EnableDataReporting: succeeded (the snipped part can be changed if necessary) Any help at all would be appreciated. Cheers, Alex

  Read the article

• TV-out worked, now doesn't. May the problem be the cable, TV, driver, OS, graphic card?

  - by Petruza

  I have a CRT TV hooked to the PC, which once worked great, now doesn't. I can't consider getting a newer TV, this one is used in an MAME arcade cabinet so it has to be a CRT for best old school look and feel. It's connected through the TV-out connector of my graphic card. When it worked, I had Windows XP, the same PC and the same card. Now I have windows 7, not sure if the OS switch caused the malfunction as I don't use the TV-out all the time. Can it be an upgrade of the Nvidia driver? I thought it may be the S-video to RCA cable, but tried 3 different cables and neither worked. In fact, one of them, that unlike the other two, has a single RCA output connector instead of two, behaves differently, although it doesn't work, but it does the following: When I open the NVidia settings panel, or when I change a setting and click Apply then the TV flashes for a split second and you can see the windows screen, but then it goes back to blank. So any clues what can be failing here, and some advice? Possible failures, please comment on the one you suspect the most: NVidia driver version Windows version Cable Graphic card's TV out other?

  Read the article

• Grub hangs at "Starting up ..." when USB flash card reader is plugged in (on Ubuntu Hardy)

  - by Laurence Gonsalves

  I have a PC with Ubuntu Hardy installed. The machine boots fine unless my USB flash card reader (one of those N-in-1 readers by MediaGear) is plugged in at startup. If the reader is plugged in, the boot process proceeds as normal until it gets to the screen that says "Starting up ...". At that point it just hangs forever. To work around this I currently leave the reader unplugged when booting, and then plug it back in after I see that Ubuntu is actually starting. This is annoying though, especially when I reboot the machine (typically for updates), forget to unplug the reader, and walk away only to come back hours later to find the machine hung. My guess is that the presence of the reader is confusing Grub about where to find the kernel. The weird thing is that Grub is on the same drive as the kernel I want it to boot so clearly the drive is still readable even when the flash card reader is plugged in. Is there some way I can tell Grub to never go looking on the flash card reader?

  Read the article

• How to handle business rules with a REST API?

  - by Ciprio

  I have a REST API to manage a booking system I'm searching how to manage this situation : A customer can book a time slot : A TimeSlot resource is created and linked to a Person resource. In order to create the link between a time lot and a person, the REST client send a POST request on the TimeSlot resource But if too many people booked the same slot (let's say the limit is 5 links), it must be impossible to create more associations. How can I handle this business restriction ? Can I return a 404 status code with a JSON response detailing the error with a status code ? Is it a RESTFul approach ? EDIT : Like suggested below I used status 409 Conflict in addition to a JSON response detailing the error

  Read the article

• Correcting CS0009 Error When Creating Integration Services Project

  - by ajdams

  Tried to open an SSIS project I had been working on today and received this lovely error: Unable to generate temporary class (result=1) error CS0009: Metadata file 'c:\WINDOWS\assembly\GAC_MSIL\System.Xml\2.0.0.0_b77a5c561934e089\System.XML.dll' could not be opened -- 'No metadata was found.' Anyone know why this happens and how to correct it, I've Googled and haven't found any valid solutions relating directly to SSIS. It is only happening with BIDS 2008 and SSIS project types and I tried the same packages (as well as creating a new one) on my other machine and it was fine. Any ideas? Thank you.

  Read the article

• ATG Live Webcast Feb. 24th: Using the EBS 12 SOA Adapter

  - by Bill Sawyer

  Our next ATG Live Webcast is now open for registration. The event is titled:E-Business Suite R12.x SOA Using the E-Business Suite AdapterThis live one-hour webcast will offer a review of the Service Oriented Architecture (SOA) capabilities within E-Business Suite R12 focusing on the E-Business Suite Adapter. While primarily focused on integrators and developers, understanding SOA capabilities is important for all E-Business Suite technologists and superusers.ATG Live Webcast Logistics The one-hour event will be webcast live with a dial-in access for Q&A with the Applications Technology Group (ATG) Development experts presenting the event. The basic information for the event is as follows:E-Business Suite R12.x SOA Using the E-Business Suite AdapterDate: Thursday, February 24, 2011Time: 8:00 AM - 9:00 AM Pacific Standard TimePresenters:  Neeraj Chauhan, Product Manager, ATG DevelopmentNOTE: When you register for the event, the confirmation will show the event starting at 7:30 AM Pacific Standard Time. This is to allow you time to connect to the conference call and web conference. The presentation will start at 8:00 AM Pacfic Standard Time.

  Read the article

• What do I need to know before accepting a contract position in the United States?

  - by Andrew

  I just received an initial job offer for a contract position as a PHP developer. I have never had a contract position before, so I don't know what the implications of this are, and how it differs from a salaried position with benefits. =/ What are some things that I should be aware of before accepting the contract position? (i.e. taxes, wages, benefits, etc) It also mentions that I will sign a "day-to-day contract". What does that mean? Resources Here are some links that I've collected so far: First timer's guide to contracting - Covers contracting in the U.K., but not the U.S. The contract employee's handbook - Talks about the differences between a "Contract Employee" and an "Independent Contractor"

  Read the article

• The Interaction between Three-Tier Client/Server Model and Three-Tier Application Architecture Model

  The three-tier client/server model is a network architectural approach currently used in modern networking. This approach divides a network in to three distinct components. Three-Tier Client/Server Model Components Client Component Server Component Database Component The Client Component of the network typically represents any device on the network. A basic example of this would be computer or another network/web enabled devices that are connected to a network. Network clients request resources on the network, and are usually equipped with a user interface for the presentation of the data returned from the Server Component. This process is done through the use of various software clients, and example of this can be seen through the use of a web browser client. The web browser request information from the Server Component located on the network and then renders the results for the user to process. The Server Components of the network return data based on specific client request back to the requesting client.  Server Components also inherit the attributes of a Client Component in that they are a device on the network and that they can also request information from other Server Components. However what differentiates a Client Component from a Server Component is that a Server Component response to requests from devices on the network. An example of a Server Component can be seen in a web server. A web server listens for new requests and then interprets the request, processes the web pages, and then returns the processed data back to the web browser client so that it may render the data for the user to interpret. The Database Component of the network returns unprocessed data from databases or other resources. This component also inherits attributes from the Server Component in that it is a device on a network, it can request information from other server components and database components, and it also listens for new requests so that it can return data when needed. The three-tier client/server model is very similar to the three-tier application architecture model, and in fact the layers can be mapped to one another. Three-Tier Application Architecture Model Presentation Layer/Logic Business Layer/Logic Data Layer/Logic The Presentation Layer including its underlying logic is very similar to the Client Component of the three-tiered model. The Presentation Layer focuses on interpreting the data returned by the Business Layer as well as presents the data back to the user.  Both the Presentation Layer and the Client Component focus primarily on the user and their experience. This allows for segments of the Business Layer to be distributable and interchangeable because the Presentation Layer is not directly integrated in with Business Layer. The Presentation Layer does not care where the data comes from as long as it is in the proper format. This allows for the Presentation Layer and Business Layer to be stored on one or more different servers so that it can provide a higher availability to clients requesting data. A good example of this is a web site that uses load balancing. When a web site decides to take on the task of load balancing they must obtain a network device that sits in front of a one or machines in order to distribute the request across multiple servers. When a user comes in through the load balanced device they are redirected to a specific server based on a few factors. Common Load Balancing Factors Current Server Availability Current Server Response Time Current Server Priority The Business Layer and corresponding logic are business rules applied to data prior to it being sent to the Presentation Layer. These rules are used to manipulate the data coming from the Data Access Layer, in addition to validating any data prior to being stored in the Data Access Layer. A good example of this would be when a user is trying to create multiple accounts under one email address. The Business Layer logic can prevent duplicate accounts by enforcing a unique email for every new account before the data is even stored in the Data Access Layer. The Server Component can be directly tied to this layer in that the server typically stores and process the Business Layer before it is returned to the end-user via the Presentation Layer. In addition the Server Component can also run automated process through the Business Layer on the data in the Data Access Layer so that additional business analysis can be derived from the data that has been already collected. The Data Layer and its logic are responsible for storing information so that it can be easily retrieved. Typical in most modern applications data is stored in a database management system however data can also be in the form of files stored on a file server. In addition a database can take on one of several forms. Common Database Formats XML File Pipe Delimited File Tab Delimited File Comma Delimited File (CSV) Plain Text File Microsoft Access Microsoft SQL Server MySql Oracle Sybase The Database component of the Networking model can be directly tied to the Data Layer because this is where the Data Layer obtains the data to return back the Business Layer. The Database Component basically allows for a place on the network to store data for future use. This enables applications to save data when they can and then quickly recall the saved data as needed so that the application does not have to worry about storing the data in memory. This prevents overhead that could be created when an application must retain all data in memory. As you can see the Three-Tier Client/Server Networking Model and the Three-Tiered Application Architecture Model rely very heavily on one another to function especially if different aspects of an application are distributed across an entire network. The use of various servers and database servers are wonderful when an application has a need to distribute work across the network. Network Components and Application Layers Interaction Database components will store all data needed for the Data Access Layer to manipulate and return to the Business Layer Server Component executes the Business Layer that manipulates data so that it can be returned to the Presentation Layer Client Component hosts the Presentation Layer that  interprets the data and present it to the user

  Read the article

• What’s New for Oracle Commerce? Executive QA with John Andrews, VP Product Management, Oracle Commerce

  - by Katrina Gosek

  Oracle Commerce was for the fifth time positioned as a leader by Gartner in the Magic Quadrant for E-Commerce. This inspired me to sit down with Oracle Commerce VP of Product Management, John Andrews to get his perspective on what continues to make Oracle a leader in the industry and what’s new for Oracle Commerce in 2013. Q: Why do you believe Oracle Commerce continues to be a leader in the industry? John: Oracle has a great acquisition strategy – it brings best-of-breed technologies into the product fold and then continues to grow and innovate them. This is particularly true with products unified into the Oracle Commerce brand. Oracle acquired ATG in late 2010 – and then Endeca in late 2011. This means that under the hood of Oracle Commerce you have market-leading technologies for cross-channel commerce and customer experience, both designed and developed in direct response to the unique challenges online businesses face. And we continue to innovate on capabilities core to what our customers need to be successful – contextual and personalized experience delivery, merchant-inspired tools, and architecture for performance and scalability. Q: It’s not a slow moving industry. What are you doing to keep the pace of innovation at Oracle Commerce? John: Oracle owes our customers the most innovative commerce capabilities. By unifying the core components of ATG and Endeca we are delivering on this promise. Oracle Commerce is continuing to innovate and redefine how commerce is done and in a way that drive business results and keeps customers coming back for experiences tailored just for them. Our January and May 2013 releases not only marked the seventh significant releases for the solution since the acquisitions of ATG and Endeca, we also continue to demonstrate rapid and significant progress on the unification of commerce and customer experience capabilities of the two commerce technologies. Q: Can you tell us what was notable about these latest releases under the Oracle Commerce umbrella? John: Specifically, our latest product innovations give businesses selling online the ability to get to market faster with more personalized commerce experiences in the following ways: Mobile: the latest Commerce Reference Application in this release offers a wider range of examples for online businesses to leverage for iOS development and specifically new iPad reference capabilities. This release marks the first release of the iOS Universal application that serves both the iPhone and iPad devices from a single download or binary. Business users can now drive page content management and layout of search results and category pages, as well as create additional storefront elements such as categories, facets / dimensions, and breadcrumbs through Experience Manager tools. Cross-Channel Commerce: key commerce platform capabilities have been added to support cross-channel commerce, including an expanded inventory model to maintain inventory for stores, pickup in stores and Web-based returns. Online businesses with in-store operations can now offer advanced shipping options on the web and make returns and exchange logic easily available on the web. Multi-Site Capabilities: significant enhancements to the Commerce Platform multi-site architecture that allows business users to quickly launch and manage multiple sites on the same cluster and share data, carts, and other components. First introduced in 2010, with this latest release business users can now partition or share customer profiles, control users’ site-based access, and manage personalization assets using site groups. Internationalization: continued language support and enhancements for business user tools as well and search and navigation. Guided Search now supports 35 total languages with 11 new languages (including Danish, Arabic, Norwegian, Serbian Cyrillic) added in this release. Commerce Platform tools now include localized support for 17 locales with 4 new languages (Danish, Portuguese (European), Finnish, and Thai). No development or customization is required in order for business users to use the applications in any of these supported languages. Business Tool Experience: valuable new Commerce Merchandising features include a new workflow for making emergency changes quickly and increased visibility into promotions rules and qualifications in preview mode. Oracle Commerce business tools continue to become more and more feature rich to provide intuitive, easy- to-use (yet powerful) capabilities to allow business users to manage content and the shopping experience. Commerce & Experience Unification: demonstrable unification of commerce and customer experience capabilities include – productized cartridges that provide supported integration between the Commerce Platform and Experience Management tools, cross-channel returns, Oracle Service Cloud integration, and integrated iPad application. The mission guiding our product development is to deliver differentiated, personalized user experiences across any device in a contextual manner – and to give the business the best tools to tune and optimize those user experiences to meet their business objectives. We also need to do this in a way that makes it operationally efficient for the business, keeping the overall total cost of ownership low – yet also allows the business to expand, whether it be to new business models, geographies or brands. To learn more about the latest Oracle Commerce releases and mission, visit the links below: • Hear more from John about the Oracle Commerce mission • Hear from Oracle Commerce customers • Documentation on the new releases • Listen to the Oracle ATG Commerce 10.2 Webcast • Listen to the Oracle Endeca Commerce 3.1.2 Webcast

  Read the article

• Crystal Reports Xi - Sorting a CrossTab Report by a Summary Field

  - by Albert

  So I have a simple crosstab report that calculates number of sales in the columns, and the rows are each office. The last column on the right is a total column, which contains a summary field (via a count of the identity field) that adds up the total number of sales per office. How can I sort the crosstab data so the office with the most sales is the top row, and the rest in order under it?

  Read the article

< Previous Page | 113 114 115 116 117 118 119 120 121 122 123 124  | Next Page >