Search Results

Search found 7706 results on 309 pages for 'checked'.

Page 131/309 | < Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >

  • Problem connecting to MySQL with zend

    - by wheresrhys
    I've set up a virtual host on my local machine (windows xp with xampp installed), have installed zend there and am now trying to connect to the MySQLdatabase. I get the following error message: Message: SQLSTATE[HY000] [2003] Can't connect to MySQL server on ''myhost.com'' (10060) All the tips I've found via google haven't helped. I use kaspersky antivirus and have added port 3306 to the allowed list for MySQL and Apache. I've also pinged myhost.com:3306 and get a response (with ip address 67.63.50.51), though localhost:3306 and 127.0.0.1:3306 aren't found. I've checked that other apps can still access MySQL if the virtual host is pointed at them instead and my non zend apps do work. I guess I have to do something further to the port, or maybe force the app to use a different port, but am not sure how to do either. Any help appreciated.

    Read the article

  • "The program is too big to fit in memory" problem?!!

    - by user47038
    Please help me!!! This is most amazing error that i have ever had, we write 100 CD, in these CDs we got one setup.exe file that autorun. in some of these CDs when I explore the cd the setup.exe file become the command prompt file and give me above error. and when I reset the system and put it in another pc it`s ok. if I reset the first pc the autorun.exe run. so I change it different computer, randomly get this problem. I am sure about the virus, because I checked on different pcs and with fully update definition so someone tell me what happen?

    Read the article

  • PHP fopen fails - does not have permission to open file in write mode.

    - by George
    Hello. I have an Apache 2.17 server running on a Fedora 13. I want to be able to create a file in a directory. I cannot do that. Whenever I try to open a file with php for writing fopen(,'w'), it tells me that I don't have permission to do that. So i checked the httpd.conf file in /etc/httpd/conf/. It says user apache, group apache. So I changed ownership (chown -R apache:apache .*) of my whole /www directory to apache:apache. I also run chmod -R 777 * Apart from knowing how terribly dangerous this is, it actually still gives me the same error, even though I even allow public write!

    Read the article

  • Printer Properties not sending the correct page size to program

    - by Jeff
    We have a Zebra 2844 Label Printer with 4"x3" labels in it. When we check the page settings in Windows XP, it is set to the correct size. When we go to print out of any program, it prints 4"x11". I have checked the page settings in one of the programs that we are using and it does show correctly the 4"x3" settings but prints at the incorrect 4"x11". I have followed the steps here Paper size: Printer Properties vs Page Setup and here Is there a way to programatically set the printer properties in windows? but have not been able to glean enough information to figure it out. If anyone can help, I would appreciate it!

    Read the article

  • HAProxy and Intermediate SSL Certificate Issue

    - by Sam K
    We are currently experiencing an issue with verifying a Comodo SSL certificate on an Ubuntu AWS cluster. Browsers are displaying the site/content fine and showing all the relevant certificate information (at least, all the ones we've checked), but certain network proxies and the online SSL checkers are showing we have an incomplete chain. We have tried the following to try to resolve this: Upgraded haproxy to the latest 1.5.3 Created a concatenated ".pem" file containing all the certificate (site, intermediate, w/ and w/out root) Added an explicit "ca-file" attribute to the "bind" line in our haproxy.cfg file. The ".pem" file verifies OK using openssl. The various intermediate and root certificates are installed and showing in /etc/ssl/certs. But the checks still come back with an incomplete chain. Can anyone advise about anything else we can check or any other changes we can make to try to fix this? Many thanks in advance... UPDATE: The only relevant line from the haproxy.cfg (I believe), is this one: bind *:443 ssl crt /etc/ssl/domainaname.com.pem

    Read the article

  • 32bit ODBC Postgres driver on Windows 2008 R2 x64

    - by uaise
    I'm trying to install the Postgres ODBC 32bit driver on a Windows 2008 R2 64bit machine. After installing it, with no errors, I go to the ODBC panel, the 32bit version under the /syswow64 folder and try to add the driver, select the Postgres driver from the list but I get an error 126, saying he can't find the driver at the specified path. The problem is that the path he shows me, is the exact path the driver is in, I double checked on the registery (on the HKLM\SOFTWARE\Wow6432Node\ODBC\ODBCINST.INI\ location) and it's fine there too. A couple more people on technet have the same issue too. Did anyone ever run into this? Any ideas would be greatly appreciated. edit: the driver works fine on my win7 x64 test machine, this behaviour only happens on the server.

    Read the article

  • Why is Thunderbird saying I am working offline when Work Offline is not ticked?

    - by Dizzley
    Thunderbird says "You are currently offline. Do you want to go online to get new messages?" The menu item File-Work Offline is not checked. Is there another "offline" setting? Back story: I moved my Thunderbird profile from another user to my new account today following the instructions here. (it's down as I type). This may be a red herring. I have been sending and receiving happily in the last few hours since - so I remain confused. (Windows 7 Enterprise).

    Read the article

  • Check the disk for problems on Debian Lenny

    - by Equ
    Hi guys! I just bought a VPS hosting with Debian Lenny (I'm new to all this world). I've managed to install and setup everthing I need pretty well. My testing website works fast as expected most of the time, but sometimes it is really slow (response time is about 5-10 seconds). I checked everything and seems that there are may be some disk issues. How can I check the disk for problems/performance? What else could possible cause such a behaviour? Thank you!

    Read the article

  • Why does my laptop shut down, does it get too hot?

    - by Kevin P.
    When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

    Read the article

  • Google Chrome doesn't stay logged in to Google sites when using pinned tabs

    - by Nick T
    Despite checking "stay logged in" or the like on Gmail or Docs, Chrome refuses to do so when I close and re-open it with Google sites pinned. If they're not pinned, it works fine. The "Clear cookies and other site and plug-in data when I close my browser" checkbox in the settings is not checked, and I don't have any cookie exceptions. All settings are defaults. Nor is the incognito mode being used. This occurs on all my computers using Chrome. I have deleted my cookies file (%userprofile%\AppData\Local\Google\Chrome\User Data\Default\Cookies) with no effect (other than losing the logins that ordinarly work fine). Of note is that when I relaunch Chrome with Gmail pinned and it asks me to log in, doing so once will fail (does nothing; no errors), then it will work on the second attempt. If I refresh the window before doing so, it will work on the first attempt.

    Read the article

  • Apache crashing at random intervals. Can not find a reason in log files

    - by Nick Downton
    We are having an issue with a VPS running plesk 9.5 on ubuntu 8.04 At seemingly random intervals Apache will disappear and needs to be started manually. I have checked the apache error log, /var/log/messages, individual virtual host apache error files and cannot find anything that coincides with the time of the failure. dmesg is empty which is a bit odd. We have also had the psa service go down for no apparent reason but apache stay up. I'm at a loss to diagnose this really because all the log files I can find do not point to any issues. Are there any others I can look at? Memory usage sits at about 55% (out of 400mb) and it isn't a particularly high trafficed server. Any pointers as to where else I can find out what is going on would be very much appreciated. Nick

    Read the article

  • How to accelerate and notice failure of potentially faulty disks

    - by rainier
    Hey, I got a bunch of 'used' servers, whose disks should have been checked, but they have been shipped around the county in crate which can't help. I just had one disk go bad (despite being mirrored, currently trying to get more details). The server was fine for about a week before everything ground to a halt this afternoon. Is there any way 'accelerate' the failure of faulty disks, with the goal of bringing the disk to failure before we launch production services? Would doing lots of I/O with 'dd' or 'iozone' be a good way to test these potentially faulty disks? Any other tests/tools that would help recognized failures before they happen?

    Read the article

  • VM clients can not access WAN

    - by Saariko
    I have a new VM host on my network, on a Dell R620. The dedicated iDrac is connected with static IP of: 192.168.3.x NIC #1 is connected to my router The eSXI 5.1 host is with IP of 192.168.3.250 The vSphere appliance has a static IP of 192.168.3.241 All the clients on the new host are in the same network 192.168.3.x All clients are Windows 2008 R2 My problem is that non of the clients can access the WAN. I can't ping anything which is beyond my router. I CAN ping anything within my router, even if it's on a different subnet - 192.168.0.x (Router rules are in tact and working) I can ping the gateway (192.168.3.254) One thing that I checked, and is bothering my (but don't know if it has any relevance) is that on the Host Networking properties, there is a vmnic0 (picture) that shows as if it only recognizes 192.168.0.x network - is that so? The command: route print shows me the following details, where I have a duplicate entry for 0.0.0.0 (and one is wrong) - which is probably also why it's not working

    Read the article

  • Downloads speed starts ok but after a few seconds they go down to 10kbps?

    - by peterg
    Since yesterday any file I try to download from any host start downloading ok (at 1mbps) but after a few seconds the speed start to decrease down to 10kbps. I use a mobile modem (huawei) and I connect to a wcdma network. What could be happening? I use kaspersky, and I checked the Network Monitor and I don't see any weird process using bandwidth. What other tests can I run? Recommend me some app to monitor the traffic to see if I have some malware or see where my bandwidth goes.

    Read the article

  • Messages Disappeared from Outlook Sent Folder

    - by Bryan
    Two days ago almost all of the messages in my Microsoft Outlook sent folder disappeared. I say "almost all" because only the messages from the past 2 weeks remain. This led me to believe that they must have been "auto archived," but I can't find an archive file that contains my messages. I've checked the folder where Outlook says it archives messages, but there's not much there. I've changed my settings to prevent Outlook from auto-archiving my messages in the future, but still need the ones that have disappeared. Can anybody help me find my missing messages?

    Read the article

  • dig gets the right result from DNS server, but name still fails to resolve

    - by EMiller
    Under what conditions would the following occur? From a given OSX machine on an internal network: $~ cat /etc/resolv.conf nameserver 10.102.120.7 nameserver 10.102.120.2 From the same machine: $~ dig @10.102.120.7 in.local <snip> ... ;; QUESTION SECTION: ;in.local. IN A ;; ANSWER SECTION: in.local. 43200 IN A 10.102.123.30 <snip> ... And yet, this workstation cannot ping in.local, nor load pages hosted by apache on that machine. 10.102.123.30 is definitley up (2 OSX machines I know fail to resolve in.local - but other machines on the network can). I have also checked their /etc/hosts to see if anything there might interfere... Not sure what else to check...

    Read the article

  • How do I change the NGINX user?

    - by danielfaraday
    I have a PHP script that creates a directory and outputs an image to the directory. This was working just fine under Apache but we recently decided to switch to NGINX to make more use of our limited RAM. I'm using the PHP mkdir() command to create the directory: mkdir(dirname($path['image']['server']), 0755, true); After the switch to NGINX, I'm getting the following warning: Warning: mkdir(): Permission denied in ... I've already checked all the permissions of the parent directories, so I've determined that I probably need to change the NGINX or PHP-FPM 'user' but I'm not sure how to do that (I never had to specify user permissions for APACHE). I can't seem to find much information on this. Any help would be great! (Note: Besides this little hang-up, the switch to NGINX has been pretty seamless; I'm using it for the first time and it literally only took about 10 minutes to get up and running with NGINX. Now I'm just ironing out the kinks.)

    Read the article

  • "System call failed" error when trying to open "My Computer" etc. under the Start menu! What is happening?

    - by verve
    When I go to the start menu I can load program icons but if I click on Documents, My Pictures, My Computer, Default Programs...all the options on the right part--I get "System call failed". How do I solve ths? Is my HD failing? Also, I don't know if it's connected but yesterday my uTorrent stopped working in a way it has never done before. I'm not able to download torrent files. In the program I get "socket unreacheable..." Also, for the last 2 days my internet has been super-slow. I checked Kaspersky for viruses. It says: "No active threats". Windows 7 64-bit.

    Read the article

  • cannot access my own computer through My Network Places

    - by WebMAOhist
    My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

    Read the article

  • New power supply and now HDDs are not recognized

    - by Michael
    So I upgraded to a new X4 ULTRA power supply that was recommended to me by a local TigerDirect store. After installing it along with a new liquid cooling system, I booted it up and it automatically fried my CD Drive. After that I noticed that the OS wouldn't start and figured out that none of the 4 HDDs in my computer were being recognized by the BIOS. I feel them spool at a steady pace and have tried new cables and connections but to no avail. I triple checked all of the connections and cables and have no idea what is wrong. This isn't the first time I changed a PS or CPU cooling system but I am at a dead end. Any ideas, aside from buying a USB HDD reader and seeing if they are all fried? Also, this is a stock Gateway mobo with the mobo USB connections already dead. Could the new PS have fried the SATA connections??

    Read the article

  • Cannot add Windows 7 client to SBS 2008

    - by Sandokan
    I have just installed SBS 2008 R2 Standard on VMware Workstation 9 along with Windows 7 Pro N. Both are activated and running fine. I have followed the steps to configure SBS 2008 and am now at the point where I'm to add a computer to the domain. Here is where the problem begins. I have gone through the steps of using the webinterface. On the client I downloaded Launcher.exe. I then run it and get the error "Check computer requirements - Failed" (translated from swedish): "This computer doesn't reach the requirements for connecting to the network." "The computer doesn't reach the maximum requirements for the operating system with regards to connect to the network" The provided link for More information only leads to a general supportpage and doesn't handle this specific error. I have also checked the time settings and they are correct. Any clue as to what this problem could be?

    Read the article

  • Windows 7 - Explorer fails to load with UAC enabled

    - by mfranklin
    While running an InstallShield based installer, my Windows 7 machine became unresponsive. After forcing a reboot, I can log in to the system, but explorer does not run. I can log in as a different user without issue and when I change modify UAC to its lowest setting, I can log in as the user that was performing the install. However, if I re-enable UAC, I am unable to get explorer to run again on login. I have checked the HKCU\Software\Microsoft\Windows\CurrentVersion\Run and RunOnce, but don't see anything that isn't configured to run in the user that I can successfully log in as. I completed the installation of the software as the "good" user without issue.

    Read the article

  • Server error at large posts

    - by Shirko
    On a large drupal site, the database server is on a separate server connected directly to the web server. The web server uses apache and memcached. The problem is that whenever the post is a large, say larger than 10KB, the server does not return correctly. I checked both apache and mysql logs but could not find any trace of errors being logged. The error happens also when I use nginx/php5-fpm instead of apache. Despite this, the large posts are registered, however incorrectly so that they show up for admin when I open a new page on the site. I'm really confused and appreciate your hints to pinpoint the possible sources if this chronic problem.

    Read the article

  • How can we tell what driven the Private bytes spiking.

    - by ronin
    I have websites running on .Net Framework 2.0 environment. For recent every day my website becomes slow at certain time and I need to recycle my app pool. I checked the log file found that the private bytes will spike during that time slot. Through some research I already know that the managed code and unmanaged code consists of Privates and we can identify which one cause the spike based on "Bytes in all heaps" counter. But I can't find a way to dig deeper. Is there any way that I can find out what driven my private bytes spike? How can we see what the private bytes are being used for? Thanks, Ronin

    Read the article

  • Why is my ethernet interface in promiscuous mode

    - by nhed
    I read that seeing a flag of M in netstat -i is the way to tell which of your interfaces is in promiscuous mode I run it and I see that eth1 is in promiscuous mode $ netstat -i Kernel Interface table Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg eth1 1500 0 1770161198 0 0 0 57446481 0 0 0 BMRU lo 16436 0 97501566 0 0 0 97501566 0 0 0 LRU This seems to be the case on all the machines I checked (All Centos6.0, both virtual and physical), any idea why ethernet devices would be in such a mode unless someone was running any pcap based app (sudo lsof | grep pcap shows nothing)? I did not see any mention of promiscuous in any of the config files (sudo grep -r promis /etc) Any ideas what puts the interface into that mode and why? p.s. most of the posts I see seem to be security related, this is not that

    Read the article

< Previous Page | 127 128 129 130 131 132 133 134 135 136 137 138  | Next Page >