Search Results

Search found 7845 results on 314 pages for 'connected'.

Page 137/314 | < Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >

• Reverse DNS does not match SMTP banner vs Reverse DNS mismatch

  - by MadBoy

  I have to make decision whether my Reverse DNS should match SMTP banner but Reverse DNS to DNS and vice versa stays different or vice versa. Which one to choose? I have an 2x Exchange 2010 server with one SMTP Sender with TMG 2010. TMG has 2 links connected so that we have 2 separate internet providers. The problem is I have no way to control TMG behavior on which link is used to send emails as it picks it randomly. I have 2 MX records: - mail.test.com which resolves to IP and IP resolves to mail.test.com - mail2.test.com which resolves to IP2 and IP2 resolves to mail.test.com This was done to prevent smtp banner issues but it provides problems with Reverse DNS if the server on the other side is eager enough to do comparison. But I've checked with Google and they also don't have that in perfect condition.

  Read the article

• Apache HTTP Server - Other local network pc can't access web application [closed]

  - by Manellen

  I have problem while accessing my web application through other pc via LAN. Here is the scenario: I have 3 computers directly connected to LAN and one computer has installed Apache HTTP Server also has a web application. 2 Other computers try to access wep application to the installed Apache HTTP Server computer and that 2 computers can't access the web application. That 2 computer displaying Does anyone know how to fix it? (fix how to make that 2 computer could access the web application through LAN) Thanks in advance.

  Read the article

• win xp client, win 7 host, only xp drivers

  - by brett

  I have a win 7 64 bit box which has xp on it in a vmware module and also the win7 version. I can use my old usb wifi card under virtual xp as i have the wifi drivers, but apparently the manufacturing company never made any further drivers, nor did it release the source code. Is it possible to get networking between the client and the host, so that my host can browse etc? I thought the microsoft loopback adapter might be the answer but ever example i can find of it's use describes a setup where the host is connected fine and needs to route data to the client as well.

  Read the article

• Slow NFS transfer performance of small files

  - by Arie K

  I'm using Openfiler 2.3 on an HP ML370 G5, Smart Array P400, SAS disks combined using RAID 1+0. I set up an NFS share from ext3 partition using Openfiler's web based configuration, and I succeeded to mount the share from another host. Both host are connected using dedicated gigabit link. Simple benchmark using dd: $ dd if=/dev/zero of=outfile bs=1000 count=2000000 2000000+0 records in 2000000+0 records out 2000000000 bytes (2.0 GB) copied, 34.4737 s, 58.0 MB/s I see it can achieve moderate transfer speed (58.0 MB/s). But if I copy a directory containing many small files (.php and .jpg, around 1-4 kB per file) of total size ~300 MB, the cp process ends in about 10 minutes. Is NFS not suitable for small file transfer like above case? Or is there some parameters that must be adjusted?

  Read the article

• forwarding packets from wireless nic wlan0 to another Wireless nic wlan1

  - by user179759

  I have two wireless interfaces wlan0, wlan1 I want wlan0 to be connected to the internet via a wireless router and I want wlan1 to be in AP mode acting as a router to give internet access to whoever connectes to it. So basically all packets coming through wlan1 should be forwarded to wlan0 = Router = Internet. That's including DNS/DHCP/etc.. [A]~~~~~(Wi-Fi)~~~~~~v [B]~~~~~(Wi-Fi)~~~> [me] ~~~~(Wi-Fi)~~~~~>[AP/Router]------->[internet] [C]~~~~~(Wi-Fi)~~~~~~^ Any idea how can I do this? ps: I tried using bridges but I always get 'operation not supported' using the brctl tool.

  Read the article

• Can't connect to a share.

  - by AngryHacker

  Hello, I have a laptop with a Windows XP Tablet Edition installed. I have several users setup on the laptop (mostly me and my kids). When I try to connect to its administrative share via \DadLaptop\c$ from a Windows 2000 Professional machine, it prompts me for a user name and password. However, after I enter it, it always tells me "incorrect password or unknown username". As a test I setup another share, called "test" and tried to connect to that. It worked fine, didn't even ask me for a password, just connected to it and that's that. All the networking is wireless. I am connecting with an admin account (admin on the target computer). What am I missing? Why can't I connect to an administrative share?

  Read the article

• How can I stop Ubuntu from playing audio from 2 interfaces at the same time?

  - by Solignis

  Hi there, I just loaded Ubuntu 10.10 Maverick on my home machine. The machine is running a Core2Duo E6750 on an MSI motherboard with an Nvidia GTX260-OC Graphics card. The problem I am having as stated in the title is for some reason Ubuntu is playing audio through my headphone coming out from the computer and it is also playing the audio at the exact same time through the HDMI connection coming out of the graphics card, it has a plug to allow this. What is going on, I have never seen this before. Most importantly of all can it be fixed so that I can sepertate the 2 interfaces, the one is a standard PC audio IO and the HDMI one is connected through the mobo's internal SPDIF. More information can be provided if required.

  Read the article

• NAT for Sprint Nexus S "Portable Wi-Fi hotspot"

  - by Jon Rodriguez

  I am on a 2010 Macbook Air connected to the web over wifi tethering on my Sprint Nexus S. I want to be able to host a few files using MAMP, but it seems that Sprint is running a NAT. When I query checkip.dyndns.org right now, it returns 68.27.228.75. However, trying to navigate to that IP fails (even though I do have MAMP's Apache running on port 80, as verified via loopback). When I whois 68.27.228.75, it appears to be a Sprint address, with NetName "SPRINTPCS" and OrgName "Sprint Nextel Corporation". So, is there some way I can circumvent Sprint's NAT to allow people to connect to my server that is running on a Nexus S Portable Wi-Fi hotspot?

  Read the article

• linux ssh -X graphical applications will not start when system load is high

  - by Chrisv

  So I am using ssh -X to access a server. I am at a Xubuntu desktop accessing a Ubuntu server that is in the next room. Usually everything works fine, but when the system load gets high, any graphical applications I have freeze and fail to be restarted. This happens even if the process that is causing the high load has been niced to a low priority with "nice -n 19". And even though the system load is high, the command line works fine with no delay, and other applications I have running on the server (e.g. virtual machines) run fine. But any graphical application running through X dies. When the graphical applications fail they usually give out an error message that suggests a time-out. It seems that something connected to X has a low priority and times out. But what is it, and how does one fix it?

  Read the article

• iMac G5 20" (First All-In-One White Screen) Cannot Connect To Internet

  - by Goober

  The Scenario I've got an iMac G5 20" (First All-In-One White Screen) PPC. It has an Airport Extreme Network card in order to wirelessly to connect to the internet. For the most part I connect using ethernet as opposed to wirelessly, but recently have had the need to connect using the wireless. The Hardware BT Home Broadband Wireless Router. iMac G5 20" From about 5 years ago (First All-In-One White Screen) The Issue Even though I know for a fact that It has connected to the internet wireslessly in the past, for some reason it can discover the wireless router, but upon entering the password it fails to connect. I have tried multiple times to no avail. I have 2 other Mac's on the network and a pc that can all connect wirelessly. However both the mac's. Question Any ideas as to why my really old iMac G5 can't connect wirelessly anymore!?

  Read the article

• Incredibly high latency for Ubuntu guest on Hyper-V

  - by Mark Henderson

  I've got several Ubuntu 10.04 virtual machines running as Hyper-V guests on Windows Server 2008 R2 SP1 and they're all perfectly fine. Today I installed my first Ubuntu 11.10 virtual machine and I'm seeing rediculous pings: These servers are all connected via gigabit to a local LAN, with almost no network traffic at all1, with a legacy network adapter in Hyper-V. I'm a bit of an Ubuntu n00b so I don't really know where to go from here. Any ideas? free -m reports: total used free shared buffers cached Mem: 485 470 15 0 63 299 -/+ buffers/cache: 107 378 Swap: 507 20 487 This is within a few mb of our other Ubuntu servers that are on 10.04. I removed the Legacy NIC and installed a Synthetic one in Hyper-V and this did improve the numbers, in that they're around 10-30ms now, but I would still be expecting <1ms response times. 1As a comparison, I have another Ubuntu 10.04 guest on Hyper-V almost 1,000km away that has a ping of 33ms

  Read the article

• Pinnacle Studio 14 Importer crashes on Windows 7 x64

  - by Tuminoid

  Pinnacle Studio 14 Importer crashes on Windows 7 x64, thus I'm unable to import videos from my camcorder. I've Googled around and it seems to be a problem with x64 support in the program, but there is no info if it can somehow be remedied with Compatibility settings, XP mode. Further Googling got me this link, and none of the tips in site it links help. I've got no idea what ObjectDoct Plus 2 is (no a program or service installed by that name) which he claims causes the problem. Is that ObjectDoct critical to Pinnacle Studio and how to get rid of it (or any other advice how to make Studio 14 work on x64). UPDATE: 1) XP mode doesn't help as it doesn't handle Firewire, which is how my Canon HV20 must be connected to transfer HDV from tape. 2) I don't have that ObjectDock installed. 3) I don't wanna re-buy PS15 just to get this solved as PS14 should be able to do it.

  Read the article

• Will being a VPN Client interrupt web pages hosted by IIS?

  - by f1gm3nt3d

  We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

  Read the article

• problem with monitor

  - by misha nesterenko

  I have an Asus VB191T connected to notebook via DVI connector as secondary monitor. I am observing some problems on that monitor. Photo of a properly functioning screen: Photo of my Asus VB191T screen: So as you can see there are white lines on both sides of black ones. Resolution is set to the monitor's native resolution which is 1280x1024. The artifacts don't appear for every color, and they show up the clearest where there is black on a grey background. What could be wrong? The monitor itself? Perhaps the connector?

  Read the article

• DSL connection dropping when starting game

  - by bootoo

  New connection set up last week - have called tech support, signal fine, sending out tech guy tomorrow - however i cant make sense of this using Vista, 2wire connection 6mb ATT conn, wireless, i can browse website, stream video from my PC wirelessly to my xbox, watch Hulu in high res, connection seems fine I load up World of Warcraft, i select Enter World and without fail my 2wire modem 'DSL' light goes red, my internet light goes out, im no longer connected, then after 10 or 15 seconds it works again, but game has kicked me Noticed the same thing on opening or closing Utorrent as well No other phones/devices plugged into the phone jacks in the apartment - why would joining a game cause my DSL to drop? i can only guess it throws a bunch of information to the server when i hit 'enter world' and that causes an issue that shuts my connection down or my router hates me - all help appreciated

  Read the article

• Why only the left speakers are working?

  - by user324469

  I've just bought a 5.1 speakers and only the left side speakers and the center are working. If I plug in the speakers to my mp3 player than each speaker is working, so the speakers are good. I have windows 7 and I can't configure it. Please help me! I'm sure that the problem is with some settings at the computer. A while ago I had the same issue with some stereo speakers and I can't remember how I've fixed it, but it was only a setting error. I don`t think that my sound card could be the problem, because it's in-built and I have a new motherboard: asus m2n68-am. I've just tested my computer with some stereo head speakers and also only the left one was working. If I start the speakers very loud than the right speakers are making some noise, too I've connected the speakers with a two channels cable. This is the speakers type: genius sw-hf 5.1 5050 v2

  Read the article

• Enable Cisco ASA as an SSH Tunneling

  - by Jim

  I am trying to utilize my Cisco ASA as a SSH Tunnel. I've configured this before when using a Linux server as the SSH target, however I cannot seem to get it to work with the ASA. I have configured and enabled SSH on the Cisco ASA, as well as a username that I can SSH to the console, however the SSH Tunneling feature does not work. For example, on my PC I use Putty with a Local Tunnel defined to a server behind the ASA. I should be able to (if SSH connected to the ASA) be able to access the server. See screenshot of putty. has anyone come across this before? Again this is to use my Cisco ASA as a SSH tunnel, this is not a port forwarding. -Jim

  Read the article

• Need help creating advanced context menu command in Windows 7 (x64)

  - by Craig

  I found out about ForceBindIP and I really love it, so much that I am using it regularly enough to where spamming the same command prompt over and over again is getting painful. Here's ForceBindIP and what it does: http://www.r1ch.net/stuff/forcebindip/ I'm on a 64-bit of Windows 7 Home Premium. What I want to do is add a right-click context menu item so that when I browse items in Windows Explorer, or on my desktop, I can automate a ForceBindIP command (through the prompt). I am permanently connected to two networks: one over ethernet, and one over wireless. My ethernet network takes priority. What I want to do is add a "Run through wireless network" context menu item, that will send the item through this command: ForceBindIP {5F657824-9E3B-46E5-C21E-F52585R6457E} "[path to right-clicked file here]" It will need to run that command in C:\Windows\SysWOW64. I've no experience at all playing with the Windows registry or writing batch files, anything of that sort. I was wondering if anyone here would be kind enough to assist me?

  Read the article

• Make Apache to listen in multiple IPs

  - by Enrique Becerra

  Hi I'm in a big LAN, which is behind a proxy/firewall I'm working with an apache/php/mysql application, which is hosted in a small server besides my workstation. This server is connected to the LAN also and is behind the proxy: The server has a local IP assigned: 10.64.x.x Also, this server has a public IP assigned (or redirected from within the proxy/firewall) which is: 200.41.x.x I can't access public IP from LAN, but I can ping to the public IP from outside the building How should I configure Apache to listen also for public IP and open the 80 port for people accessing from outside the building?. It is set now to Listen 10.64.x.x:80 Thanks a lot in advance,

  Read the article

• PowerConnect 2848 , vlan configuration with AP

  - by Francesco

  I need to configure two vlan on an AP connected with a Dell PowerConnect 2848. The first one is up and running (let's say vlan x) , the second one is a completely different network (vlan y) , provided by a Gateway-DHCP wich i have no access, directely Patched (via patch panel) at a secondo AP device. So i cannot just plug this Gateway device on my switch without tagging traffic before, for DHCP collion . I have to solve this problem. I was thinking about tagging the traffic at the port wich I will connect the gateway device with vlan y and then set as trunk (vlanx+y) the AP port. In this way I hope to limit the vlan y traffic ONLY for the ports I selected avoiding the spread of unwanted dhcp calls. But all other ports are Unassigned , so I am not sure they won't forward dhcp (vlan y) traffic. I cannot change the Unassigned state for the vlan x ports cause vlanx is native.

  Read the article

• Is there any reason to subnet a home network?

  - by Will

  For networks I understand we set a netmask on each computer to let it know what IPs it can talk to without going through the router - IPs on the same subnet can talk directly to each other and do not have to go through a router/switch. However, in today's home networks (and I suspect corporate networks as well) every computer is connected to a router/switch (at the low cost of today's hardware I doubt there it much of a market for wired repeaters/hubs). This seems to obviate the need for a subnet mask and subnetting. Considering that in most modern home architectures every computer goes through the router, even to talk to computers on the same network, is there any reason for me to subnet a home network?

  Read the article

• Cisco 2811 router ignored input errors

  - by elbekay

  I've got a Cisco 2811 (AdvIPServices 12.4(25e)) that is showing input errors on both its interfaces, all the errors are of the ignored type. The counter for ignore errors is not increasing continuously, which made me think it would be happening in line with traffic bursts, but there really isn't a large amount of traffic running through it at any time. Both the router interfaces are connected to a 4900 (IPBase 12.2(54)) series switch. The only things I can see are: There is a slight mismatch in duplex/speed negotiation settings, one side is set to auto/auto and one full/auto, however they have negotiated fine. There have been a few fallbacks on the interface buffers, and some trims in the public buffers. Any suggestions for things to look at? I will be correcting the duplex neg settings, and might try a buffer tune, but I don't think it will help.

  Read the article

• setup Mac Book Wifi interface as Wifi hotspot using specific DHCP option

  - by srjohnhuang

  I want to using my Mac Book as an access point. Besides that I also need to configure its DHCP server to not provide DNS info. For example, Mac Books AP's ssid is "MacBookHotspot". While my iPhone connected to "MacBookHotspot", I want the Wifi info displayed my iPhone would be looked like: IP ADDRESS DHCP(tab) IP Address 192.168.0.1 Subnet Mask 255.255.255.0 Router 192.168.0.254 DNS Search Domains Client ID (key point: DNS filed is blank) Does anyone have any good suggestion? Thanks!

  Read the article

• Juniper Networks SRX240 as a office router?

  - by Jordan Mendelson

  We're a small (7 person) fast growing startup who just got our new office and we're having a 100 Mbps line installed from Cogent. I'm not familiar with Juniper devices, however the equivalent Cisco appears to be rather expensive. Features we'd like: Offsite VPN access (PPTP or L2TP IPsec) - something Mac compatible IPv6 support NAT - ideally supporting multiple outside addresses mapped to VLANs DHCP DNS forwarding would be nice QoS to keep our SIP phones happy (managed through RingCentral) VLANs for guest/internal The device is going to be connected to a set of SIP phones as well as two Ruckus 7962s for wireless access. Eventually I'd like to connect it to a Juniper ESX switch as we grow. Would a Juniper SRX240 handle this ok?

  Read the article

• IDE <-> SATA Adapter Issue - Hard Drive Not recognized

  - by nicorellius

  I was trying to use one of these IDE to SATA adapters (Syba SD-ADA50016 IDE/SATA Converter Bi-directional IDE to SATA) and I connected a working hard drive (Seagate Barracuda 500 GB SATA 3.5 Inch 7200 RPM Version 12 Desktop Internal Hard Drive ST3500418AS). I could get the drive to be recognized by the BIOS, but I couldn't boot a Linux disc or install to the drive. I tried to install pfSense to this drive and the install failed because the setup couldn't recognize the file. Has anyone heard of these adapters giving trouble and/or not working properly? I would like to be able to use this device for newer drives on older boards.

  Read the article

< Previous Page | 133 134 135 136 137 138 139 140 141 142 143 144  | Next Page >