Search Results

Search found 6200 results on 248 pages for 'recovery partition'.

Page 141/248 | < Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >

• Bootloader Problems Grub Won't Load Windows 7

  - by user108805

  I sent this to [email protected], still no response thought I could get a faster solution here. I am running Windows 7 64-bit and Ubuntu 12.04 LTS on separate partitions. The message is sent is: Boot-Repair URL: http://paste.ubuntu.com/1365163/ Originally I was unable to access Ubuntu after a windows update (Ubuntu was installed using wubi). Rather than logging into Ubuntu from the Windows 7 Bootloader, it lead to the grub command prompt. No matter what I did here, it would not log me into linux. As a result I uninstalled Ubuntu from the Add/Remove Programs application in Windows 7. I then re-installed Ubuntu 12.04 LTS using a liveCD-USB. This time however, I created a partition. I then restarted and got the GRUB bootloader which loads Ubuntu 12.04 LTS with no problems, however when I select windows (listed as "Windows 7 (loader)"), it just refreshes the grub bootloader instead of loading Windows 7. I then used the Windows 7 repair disk to run bootrec/fixmbr and bootrec/fixboot. This led to no bootloader coming up when I started my computer. Instead I got a blank black screen with a flashing white cursor. I went on to do a bootrec/buildbcd and bootrec/scanos. These did nothing to change the situation. When I ran bootrec/scanos it said that no Windows 7 installations were present. After this I decided to reinstall WIndows 7 only for this to do nothing to change the situation. Afterwards I did a boot-repair in which I began to get the GRUB bootloader, which would load ubuntu 12.04 LTS, but still would not load Windows 7. I also did a sudo update-grub which recognized Windows 7 as being installed, but still didn't fix the issue of loading Windows 7. While running Ubuntu I have no problem accessing my WIndows 7 partition which is formatted as NTFS. It shows all the files and folders reflecting that the re-install did take place, and it also shows all of my old applications and folders in the Windows.old folder. I am completely stuck at this point and have no clue what I should do next. Any help you can offer me will be greatly appreciate. Thank You --gap

  Read the article

• Presenting Loading Data Warehouse Partitions with SSIS 2012 at SQL Saturday DC!

  - by andyleonard

  Join Darryll Petrancuri and me as we present Loading Data Warehouse Partitions with SSIS 2012 Saturday 8 Dec 2012 at SQL Saturday 173 in DC ! SQL Server 2012 table partitions offer powerful Big Data solutions to the Data Warehouse ETL Developer. In this presentation, Darryll Petrancuri and Andy Leonard demonstrate one approach to loading partitioned tables and managing the partitions using SSIS 2012, and reporting partition metrics using SSRS 2012. Objectives A practical solution for loading Big...(read more)

  Read the article

• How can I get GRUB to appear after insallting Ubuntu with Windows 7 using a LiveUSB?

  - by Niall

  I booted Ubuntu 12.04 LTS from a LiveUSB, and then selected the option to install Ubuntu to my hard drive. I allowed the installer to partition it, giving Ubuntu 50GB and leaving Windows 7 with 200GB. However, when I boot I still boot straight into Windows: the only way to access GRUB is by booting from the LiveUSB, although this can then be removed. How do I access the GRUB menu by default before booting windows without using the USB?

  Read the article

• Format a pc with a GRUB error

  - by Anand

  i have a pc with a grub error {caused by deleting ubuntu partition in XP dual boot} i would like to format the hard disk and install a new OS [chromium] i do not have either the ubuntu or the XP installation drives although i do have the chromium bootable drive when i try to boot from the chrome bootable USB its says "your system is repairing itself" and restarts. this keeps happening over and over again. i just want to format my HDD completely and start over with chromium (i have no important data on the HDD)

  Read the article

• Looking for a disk manager that has options for setting allocation sizes in paritions

  - by mango

  I'm looking for a GUI program that is compatible with Ubuntu 13.10 - Server X86-64 that has all the features of Gparted but also allows for setting custom allocation sizes when creating a partition. Eg: Ability to create a 4gb Fat32 parition with 32 kilobyte allocation size. Please don't suggest a terminal only application, no matter how awesome it might be, because that's not what I asked. Wow, I come off like a right up prick when I write, eh?

  Read the article

• How to use update-java-alternatives with a local installation of the JDK?

  - by user827992

  I have Ubuntu 12.04 amd64 installed on my machine, on the previous versions of Ubuntu it was deadly easy, now there is this command update-java-alternatives with a really bad man page. I just have my JDK unpacked on a mounted partition like /media/mydisk/jdk, how i can force the use of that JDK instead of the one that comes in the Ubuntu repository? What is the logic behind this update-java-alternatives ?

  Read the article

• Can not authenticate to run GParted

  - by alfish

  Whenever I try to run a program from gnome gui, I get message Authenticated is required to run the Gparted Partition Editor The same goes for all programs that need root permission and I try to run from 'System tools' in my gnome-fallback. However the same user can become root in gnome terminal with no problem (I added the user to sudoers). I must mention that I've changed the user's password after OS install, so I think I need to update something but don't know what. I appreciate your hints.

  Read the article

• Error while installing Ubuntu 12.04 on Windows 7

  - by Nishant

  Today I tried installing Ubuntu 12 thru wubi.exe. After some time I came across this error and installation stopped. Exception: Error executing command command=C:\Windows\sysnative\bcdedit.exe /set {c7742083-ac81-11e1-ade2-fa13d4cedcff} device partition=E: retval=1 stderr=An error has occurred setting the element data. The request is not supported. Please help on this error and guide accordingly.

  Read the article

• Read-only filesystem

  - by János Harsányi

  I've resized a partition (ext4) from a Live CD with GParted, and after reboot it says that the file system is read-only. I've rebooted again from the CD and checked it with GParted with no errors. How could I find out why does it re-mount the file system in read-only mode? edit: It starts normally, but after some time, the "/" mount point gets remounted with read only settings, so I think it does have errors eventually. Is there any other way to repair it?

  Read the article

• Ubuntu 12.04 UEFI dualboot Win7

  - by bodo

  I have new laptop Asus N76 with 500GB HDD and 256 SSD. Windows 7 is installed on HDD with partitions: /dev/sda1 fat32 200MB boot (GPT) /dev/sda2 unknown 128MB msftres /dev/sda3 ntfs 94GB (Win 7) /dev/sda4 ntfs 20GB hidden,diag I want to install 12.04 on SSD disk. Is it possible to install GRUB2 at /dev/sda1 partition? Is Ubuntu installer ready for that? Is there some configuration for GRUB2 to setup boot path for Windows 7 (HDD) and Ubuntu 12.04 (SSD)?

  Read the article

• Can not authenticate form system tools

  - by alfish

  Whenever I try to run a program from gnome, I get messages like Authenticated is required to run the Gparted Partition Editor The same goes for all programs that need root permission and I try to run from 'System tools' in my gnome-fallback. However the same user can become root in gnome terminal with no problem (I added the user to sudoers). I must mention that I've changed the user's password after OS install, so I think I need to update something but don't know what. I appreciate your hints.

  Read the article

• Why is Ubuntu 12.04 taking very long to start and run programs?

  - by Anna

  I have a Toshiba laptop with 2.8 gb of ram, 1.87x2 GHz processor, and Ubuntu 12.04 64 bit on it as a partition installed with wubi. It takes 5-10 mins to start up, and opening any program (such as Chromium, Chrome, Skype, Firefox, Thundermail, etc) takes over half a minute. I stopped using Unity because my graphic card couldn't handle it and swapped over to Cinnamon. It's a little better, but everything is still really really slow. Any suggestions/solutions?

  Read the article

• Graphical disk surface check tool?

  - by sbergeron

  I need a program that can scan my hard drive for read and write errors so I can partition around them. I REALLY don't do well with numbers but if I can have something that shows an output like the graphical display on gparted that would be perfect. I know a lot of people would recommend replacing the disk but right now I can't as I NEED this laptop for school and can't wait for a hard drive to arrive (I have ordered one, yes, but I don't expect it to arrive for another couple weeks as I only figured out afterwards they still have to manufacture it)

  Read the article

• Ubuntu doesn't "see" external USB Hard Disk

  - by Mina Michael

  It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

  Read the article

• GRUB problem after uninstalling mint

  - by Yehonatan Tsirolnik

  I've uninstalled Linux Mint 13 today from my netbook. The netbook was running Windows XP and Linux Mint on dual boot. I've deleted the Linux's partition and now whenever I turn on the computer I get "Partitation not found" grub error... I have no CD drive so I can't insert any repair CDs or XP CD. I'm currently hopeless. And now I can't even load Linux Mint from my USB drive... Can someone help me?

  Read the article

• G?rer les bases de contenu SharePoint - G?rer la croissance du volume des donn?es

  Dans le cadre de la gestion quotidienne de ferme SharePoint, il existe une partie qu'il faut surveiller avec attention. En effet, l'utilisation des Team Sites se fait bien souvent de mani?re plut?t virale et vous pouvez rapidement vous retrouver avec des centaines (voir des milliers) de collections de sites. La question de la r?partition de ces collections dans les bases de contenu est tr?s importante.

  Read the article

• No Option To Duel Boot Ubuntu 12.04 USB

  - by Jordan

  I have used universal usb installer on my HP probook 2000 on my Kingston data traveler (8GB). When I boot I select to boot from USB and then click on Install Ubuntu 12.04 LTS, I get to the partition part, but there is no option to keep existing Windows and dual boot. I only have Erase entire disk and something else. How can I get this dual boot to come up? Screen Shot Here I also cannot use a CD/DVD

  Read the article

• Screen cuts off part of GRUB on boot

  - by Matthew

  I've recently installed Ubuntu 11.10 on my Windows 7 desktop computer (on a seperate partition) Everything has gone smoothly except when I restart the computer and GRUB's loader screen shows, part of the screen gets cut off.. but once ive selected a boot option and hit enter, the screen readjusts to fill the entire monitor properly. So my question is, is there a way I can correct this ? Kind of annoying not being able to see the full boot option

  Read the article

• How to run video from wine?

  - by 101

  I tried to run it from total commander, I tried to make a link to it /media/DATA/#TO_BACKUP/_MUSIC/MUSIC2/Black Eyed Peas - The Time (Dirty Bit).avi but it says Failed to execute child process "/media/DATA/" (Permission denied) Opening the full location from MediaPlayer does not work (open location) Location not found I can open it slowly by navigating in the slow file open dialog, but I would like to open it from totalcmd or by created link or by passing full location. P.S. Before that I have opened the DATA Partition.

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• Moving 11.10 complete system to a new bigger Harddisk

  - by pl1nk

  I would like to move my current installation of Ubuntu 11.10 to a bigger harddisk, since the old one is failing. I would like to avoid solutions like dd block copying (since there would be unused space at the end) with something cleaner, but I'm open to suggestions. Partitions info: Size Used Avail Use% Mounted on Partition type Encrypted 19G 9.9G 7.6G 57% / ext4 59G 50G 6.2G 90% /home ext4 Yes What is the best way to accomplish such a task, preferably with advantages/disadvantages.

  Read the article

• File system with chained clusters

  - by Maki Maki

  I'm trying to create school file system with partitions on disks, every partition has its cluster for her representation. typedef unsigned long ClusterNo; const unsigned long ClusterSize = 2048; int x, y ;//x ,y are entries for two-chained lists of clusters if (endOfFile<maxsize// { ... { pointer = KernelFS::searchFreeCluster(partitionPointer->letter) " How can I initialize the beginning for two clusters, their pointers to be 32 bits?

  Read the article

• I want to be able to load Ubuntu from the Windows Boot Loader using EasyBCD, but Ubuntu won't show up

  - by user1604288

  I am trying to create a dual-boot environment between Windows 8.1 and Ubuntu 14.04. I installed Ubuntu on a separate partition successfully, and I am following these instructions: Is it possible to boot Ubuntu using the Windows bootloader? However, when I restart my computer, Windows Bootloader still won't recognize Ubuntu. Does anyone know what could be wrong? EDIT: I can add an Ubuntu entry successfully using EasyBCD, but as soon as I restart my computer, the entry disappears.

  Read the article

• Can't Boot Into Windows After Ubuntu Install

  - by user203808

  I recently installed ubuntu and I have two hard drives installed on my computer I have ubuntu on one and windows on the other after I finished installing ubuntu I go to boot into windows and I get an error no such partition. So I thought that I had erased windows but I didn't as the hard drive with Windows still shows up under ubuntu. Then I tried to fix the MBR but it shows up as windows not being installed but I can access all the files in ubuntu what the heck is going on?

  Read the article

• Mounting Wubi part from another Linux installation

  - by FrankSus

  hope someone can help. I need to access 11.04 ubuntu files residing on a second hard drive (dual boot XP/Ubuntu) from a 10.04 hard drive installation. The 11.04 system co-exists with XP on the second drive. This drive is HPFS/NTFS. My 10.04 installation mounts and displays the contents of the XP installation and all files but the 11.04 system is nowhere to be seen. How can I see and access the Ubuntu partition, please?

  Read the article

< Previous Page | 137 138 139 140 141 142 143 144 145 146 147 148  | Next Page >