Search Results

Search found 10466 results on 419 pages for 'restart explorer'.

Page 144/419 | < Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >

  • How to I set up nfs using the Drobo Unfsd app?

    - by Jan Aagaard
    How do I set up my nfs on my Drobo FS so that I can connect to it from my Mac using the NFS protocol? I have downloaded and installed Unfsd program from the DroboApps page. My exports file looks like this: /mnt/DroboFS/Shares 192.168.1.0/255.255.255.0(rw,no_root_squash) I try to connect to the share by hitting Ctrl+K in Finder and the using nfs://drobo-fs.local/Shares as server address. But when I click Connect all that happens is that the Connect to Server window flashes shortly, and well, that's all. I have tried removing the /Shares part, using /Public and casing drobo-fs.local as Drobo-FS.local, but it's all with the same result. I have also tried using /mnt/DroboFS/Shares *(rw,no_root_squash) in the exports file. I restart the service using the command ./service.sh restart.

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

  • Got Bus error (core dumped) when run the nova-compute from nova user

    - by Lafada
    I got error when I try to restart the nova-compute service on my compute node. [root@mycompute ~]# service nova-compute restart Stopping OpenStack Nova Compute Worker: [ OK ] Starting OpenStack Nova Compute Worker: [FAILED] I check in the log file /var/log/nova/nova-compute.log but nothing is logged in that file. Then I try to run the command with nova user. [root@mycompute ~]# su -s/bin/bash nova bash-4.1$ /usr/bin/nova-compute Bus error (core dumped) I check for this error on net but didn't get the link to where to check for this error.

    Read the article

  • Unable to uninstall SQL Server express

    - by Joel Martinez
    When I try, I receive the following error message: A computer restart is required. You must restart this computer before installing SQL Server. Of course, I have restarted the computer :-) I'm not really sure how to proceed. The version that sql server reports when I query it is: SQL Server 10.0.1600.22 - RTM (Express Edition with Advanced ) Solved: As it turns out, I had to end up uninstalling logitech's quick cam pro software. Although the fix below did not directly resolve it, the value of that registry key led me to discovering the solution by querying for it online :-) thanks!!!

    Read the article

  • Apache/passenger/ree doesn't interpret .rb files

    - by Sergey
    I'm trying to get apache + passenger + ree to work. I think I did everything (except for setting up rails env - for now I wanna run just pure ruby) described here: http://rvm.beginrescueend.com/integration/passenger/ But when I try to go to localhost/test.rb it doesn't interpret that file and just download it. I don't know where should I look for mistakes, so here are a few files I think could be relevant: /var/log/apache2/error.log (these 2 lines are repeating) [Mon May 31 23:12:47 2010] [notice] Graceful restart requested, doing restart [Mon May 31 23:12:48 2010] [notice] Apache/2.2.14 (Ubuntu) PHP/5.3.2-1ubuntu4.2 with Suhosin-Patch Phusion_Passenger/2.2.11 configured -- resuming normal operations /etc/apache2/httpd.conf LoadModule passenger_module /home/sergey/.rvm/gems/ree-1.8.7-2010.01/gems/passenger-2.2.11/ext/apache2/mod_passenger.so PassengerRoot /home/sergey/.rvm/gems/ree-1.8.7-2010.01/gems/passenger-2.2.11 PassengerRuby /home/sergey/.rvm/bin/passenger_ruby /var/www/test.rb puts "test"

    Read the article

  • Can't bind spawn-fcgi to address

    - by Xeoncross
    Following some nice instructions I am almost through setting up PHP to run on nginx. However, every time I try to start spawn-fcgi I get an error message demo@desktop:/usr/bin$ sudo /etc/init.d/php-fastcgi start spawn-fcgi: bind failed: Cannot assign requested address My /etc/init.d/php-fastcgi startup script is: #!/bin/bash PHP_SCRIPT=/usr/bin/php-fastcgi FASTCGI_USER=demo RETVAL=0 case "$1" in start) su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; stop) killall -9 php5-cgi RETVAL=$? ;; restart) killall -9 php5-cgi su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; *) echo "Usage: php-fastcgi {start|stop|restart}" exit 1 ;; esac exit $RETVAL console output which loads /usr/bin/php-fastcgi #!/bin/sh /usr/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -C 6 -u demo -f /usr/bin/php5-cgi One thing to note is that I am running the PHP cgi as the user "demo" which is my account.

    Read the article

  • How does one get Vista to display .MOV thumbnails as a frame from the movie?

    - by Paul Hollingsworth
    I've discovered that Windows Vista explorer shell does not display proper "thumbnail"s for .MOV files. e.g. For .JPG files, the explorer shell, when in Thumbnail mode, displays a scaled down version of the image. But for .MOV files, it displays the same icon as in the non-thumbnail view, which is just some generic thing that shows you it's going to be played with Quicktime or whatever. What XP used to do was show you a frame from the actual movie as the thumbnail. I've looked on internet and found various proposed solutions, but none which actually work. Is there a simple step-by-step process for getting Vista to properly display thumbnails for .MOV files?

    Read the article

  • How to interpret output from Linux 'top' command?

    - by Ali
    Following a discussion made HERE about how PHP-FPM consuming memory, I just found a problem in reading the memory in top command. Here is a screenshot of my top just after restarting PHP-FPM. Everything is normal: about 20 PHP-FPM processes, each consuming 5.5MB memory (0.3% of total). Here is the aged server right before restart of PHP-FPM (one day after the previous restart). Here, we still have about 25 PHP-FPM with double memory usage (10MB indicating 0.5% of total). Thus, the total memory used should be 600-700 MB. Then, why 1.6GB memory has been used?

    Read the article

  • Why does my computer slow down after being on too long?

    - by RoboShop
    I'm sure everyone has experienced it - if you leave a computer on too long, every once in a while, it needs a fresh reboot. I have a laptop, and I only hibernate it, but every week or two, I'm going to need to restart otherwise it will just slow down (usually when windows update makes me restart) I was wondering though... why? What are some of the things that occur that eat up memory that can seemingly not be freed unless I reboot the OS. In addition, are there any programs I can get that can free up this memory and keep the computer alive for longer? Preferably for windows 7.

    Read the article

  • Ubuntu not connecting to network in Hyper-V

    - by soandos
    I am unable to connect the Ubuntu guest (both 12.10 and 12.04) to the internet via hyper-V. Here is what I have done so far (with much thanks due to @Kronos's blog post on the topic): Created a switch in the switch manager with connection set to external, selected my wifi card (Intel Centrino Ultimate-N 6300 AGN). If it matters, the Microsoft Filtering Platform is checked under extensions. Added this switch to my Ubuntu guest. I also tried a different wireless card (Aethros 9285) same issue. Connecting through my wired card works just fine (assume that I select that card, and I am wired in of course). Making it a legacy network adapter does not fix the issue. Ubuntu can see this connection, but is unable to connect to it. What follows is what I attempted to do to get Ubuntu to connect: Start and restart the network manager Restart the machine Verify that it could in fact see the adapter (resulted in device not ready a few times) How can I get this to work properly?

    Read the article

  • How do special folders work on Windows 7?

    - by Martin
    Hello, I did something silly and accidentally moved my my special folders (My Documents, My Music etc.) to the Desktop. Once I noticed my mistake I quickly moved them back. But now my System acts erratically. It continuously creates new empty folders on my Desktop. And I have now two folders named "My Pictures" in my home directory. One of which is magically linked to the one in Desktop while on the command line one one is actually visible. If I delete the superfluous folders on Desktop then the explorer crashes. It is all a big mess. Of course I checked HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\User Shell Folders and it looks all ok there. So here the question: As anybody got any informations on how Windows 7 handles the special folders which might help be clean up the mess? I am well versed in using both the command line or the registry editor.

    Read the article

  • CUPS basic auth error through web interface

    - by Inaimathi
    I'm trying to configure CUPS to allow remote administration through the web interface. There's enough documentation out there that I can figure out what to change in my cupsd.conf (changing Listen localhost:631 to Port 631, and adding Allow @LOCAL to the /, /admin and /admin/conf sections). I'm now at the point where I can see the CUPS interface from another machine on the same network. The trouble is, when I try to Add Printer, I'm asked for a username and password, but my response is rejected even when I know I've gotten it right (I assume it's asking for the username and password of someone in the lpadmin group on the server machine; I've sshed in with credentials its rejecting, and the user I'm using has been added to the lpadmin group). If I disable auth outright, by changing DefaultAuthType Basic to DefaultAuthType None, I get an "Unauthorized" error instead of a password request when I try to Add Printer. What am I doing wrong? Is there a way of letting users from the local network to administer the print server through the CUPS web interface? EDIT: By request, my complete cupsd.conf (spoiler: minimally edited default config file that comes with the edition of CUPS from the Debian wheezy repos): LogLevel warn MaxLogSize 0 SystemGroup lpadmin Port 631 # Listen localhost:631 Listen /var/run/cups/cups.sock Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd # DefaultAuthType Basic DefaultAuthType None WebInterface Yes <Location /> Order allow,deny Allow @LOCAL </Location> <Location /admin> Order allow,deny Allow @LOCAL </Location> <Location /admin/conf> AuthType Default Require user @SYSTEM Order allow,deny Allow @LOCAL </Location> # Set the default printer/job policies... <Policy default> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default CUPS-Get-Devices> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy> # Set the authenticated printer/job policies... <Policy authenticated> # Job/subscription privacy... JobPrivateAccess default JobPrivateValues default SubscriptionPrivateAccess default SubscriptionPrivateValues default # Job-related operations must be done by the owner or an administrator... <Limit Create-Job Print-Job Print-URI Validate-Job> AuthType Default Order deny,allow </Limit> <Limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs Set-Job-Attributes Create-Job-Subscription Renew-Subscription Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job Suspend-Current-Job Resume-Job Cancel-My-Jobs Close-Job CUPS-Move-Job CUPS-Get-Document> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> # All administration operations require an administrator to authenticate... <Limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class CUPS-Delete-Class CUPS-Set-Default> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # All printer operations require a printer operator to authenticate... <Limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer Startup-Printer Promote-Job Schedule-Job-After Cancel-Jobs CUPS-Accept-Jobs CUPS-Reject-Jobs> AuthType Default Require user @SYSTEM Order deny,allow </Limit> # Only the owner or an administrator can cancel or authenticate a job... <Limit Cancel-Job CUPS-Authenticate-Job> AuthType Default Require user @OWNER @SYSTEM Order deny,allow </Limit> <Limit All> Order deny,allow </Limit> </Policy>

    Read the article

  • taskmgr.exe 100% CPU Usage

    - by Burnsys
    Hi. I have 2 IBM servers Intel Xeon Dual core with 2gb RAM. the problem is that Taskmanager uses one full core when i open it. The same happens when i copy files in the explorer. OS: Windows 2003 Server Things i tried: Installed all updates They has kaspersky anti virus and they previously had Nod32. All drivers installed OK. All unused devices are disabled in the bios. Reinstalled win 2003 SP2. No conflict in drivers Tried opening via remote desktop and the problem continues. The cpu utilization is in the Kernel Times (Red in taskmanager) If i open Proces Explorer and i navigate to the threads consuming CPU the stack traces ends always in "NtkrnlPA!UnexpectedInterrupt", all threads stacks end in "UnexpectedInterrupt" ntoskrnl.exe!KiUnexpectedInterrupt+0x48 ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!CcSetReadAheadGranularity+0x1ff9 ntoskrnl.exe!IoAllocateIrp+0x3fd ntoskrnl.exe!KeWaitForMutexObject+0x20e ntoskrnl.exe!NtWaitForSingleObject+0x94 ntoskrnl.exe!DbgBreakPointWithStatus+0xe05 ntdll.dll!KiFastSystemCallRet kernel32.dll!WaitForSingleObject+0x12 taskmgr.exe+0xeef6 kernel32.dll!GetModuleHandleA+0xdf Any help would be appreciated!

    Read the article

  • Apache error "No address associated with hostname" on Arch Linux (ZMLarch)

    - by Eedoh
    I'm trying to set up video surveillance system using IP cameras and ZoneAlarm on Arch Linux. I set up fixed IP address, I've managed to get streams from cameras, etc. However, after restart of the machine, I cannot start Apache again. I checked configuration of rc.conf, and saw that static IP configuration has been deleted, and also secondary nameserver in resolv.conf. Tried to re-write these with correct parameters, but now with no effect. This is tail of my /var/log/httpd/error_log file, after /etc/rc.d/httpd restart attempt [Fri Jan 29 04:20:45 2010] [alert] (EAI 5) No address associated with hostname: mod_unique_id: unable to find IPv4 address of "zmhost" Configuration failed Anybody have an idea on how could I fix this?

    Read the article

  • Switching BIOS SATA RAID/AHCI setting causes BSOD at Windows Start - Why?

    - by thephatp
    I just changed my disk setup from: 1 SATA HDD Primary OS Disk 2x SATA HDD Backup Disks in RAID 1 TO: 1 SATA SSD Primary OS Disk 1 SATA HDD Backup Disk [No RAID] Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo. These are my steps: Settings Integrated Peripherals "SATA RAID/AHCI Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Next Step: Launch BIOS settings Integrated Peripherals "Onboard SATA/IDE Ctrl Mode" = RAID -- Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues. What am I missing? Why can't I set it to AHCI mode without BSODs?

    Read the article

  • How quickly do I need to complete the installation of Windows updates once they're available?

    - by DragonLord
    I know that Microsoft publishes most updates on the second Tuesday of each month. While I understand that it is important to install security updates as soon as possible, do I place my computer at a significant risk if I wait more than a few hours after the updates are available to install the updates and restart the computer to complete installation? I'm asking because 1) I can't always restart the computer immediately after the system prompts me to do so; and 2) the download process sometimes has to be manually started late in the day when I remember, much later than when they're released at 01:00 PM EST/EDT, because Windows Update only seems to check automatically once per day and does so as soon as I connect to the Internet. Ideally, answers should be detailed and objective, with citations to references as appropriate.

    Read the article

  • Active Desktop cannot be restored on Win XP

    - by Phil.Wheeler
    This is more of a major annoyance than anything that's stopping me from doing my work, but I somehow seem to have had Active Desktop on my work XP machine get corrupted and now can't get it back working again. I've tried browsing to C:\Documents and Settings\%my-user-name%\Application Data\Microsoft\Internet Explorer and changing, deleting or replacing the Desktop.htt file, but it's not achieving anything. The error I was previously getting when trying to click the "Restore my active desktop" button was: Internet Explorer Script Error An error has occurred in the script on this page. Line: 65 Char: 1 Error: Object doesn't support this action Code: 0 URL: file://C:/Documents%20and%20Settings//Application %20Data/Microsoft/Internet%20Explorer/Desktop.htt Any ideas?

    Read the article

  • Importing multiline cells from csv file into excel

    - by Unreason
    I have a csv file (comma delimited and quoted). When csv file is opened directly from explorer excel correctly interprets the cells that are mutliline, but it messes up the character encoding (utf-8). Therefore I have to use import function (Data/Get External Data/From Text). However, when I use import text function in excel (where I can set file encoding explicitly) it interprets the newline as start of the new row instead of putting multiline text into a single cell and breaks the file layout. Can I somehow overcome the situation by either forcing the explorer open command to use 65001: Unicode (UTF-8) encoding forcing the Text Import Wizard to ignore quoted line breaks as record delimiters

    Read the article

  • Syn_Recievd on port 80 , IIS 7.5

    - by Ashian
    Hi I have a trouble on my windows 2008 server. I host several web site on it. From some days ago, my web sites stop responding on port 80 after a while. In this time I can't access web sites from local machine and from remote. I can also browse websites on other ports ( custom port that I set) I find that I have many Syn_Received status on netstat. And when web sites stop, I got only syn_received on port 80. I have to restart server because when I try to restart IIS , it takes a long time to stop W3SVC and many times it doesn’t stop at all. Would anyone please tell me : - How can I manage Syn Attack ? Thanks

    Read the article

  • http://localhost/~admin/ gets a 403

    - by Pavan Katepalli
    When I go to localhost/~admin/ or 127.0.0.1/~admin/ my browser says: "Forbidden You don't have permission to access /~admin/ on this server." How do I change this?!??!?! It's driving me nuts! when I go to localhost or 127.0.0.1/ my browser says: "It Works!". I'm running mac osx 10.8. I created aliases in my .bash_profile file so that I can start, restart and stop Apache quickly: alias startApache="sudo apachectl start" alias stopApache="sudo apachectl stop" alias restartApache="sudo apachectl restart" In my /etc/apache2/httpd.conf file I turned on php5: LoadModule php5_module libexec/apache2/libphp5.so I also made sure to change the permissions for my admin.conf file with this command in terminal: sudo chmod 644 username.conf This is my /etc/apache2/users/admin.conf: <Directory "/Users/admin/Sites/"> Options Indexes MultiViews AllowOverride All Order allow,deny Allow from all </Directory>

    Read the article

  • Windows 7 Bluescreen: IRQ_NOT_LESS_OR_EQUAL | athrxusb.sys

    - by wretrOvian
    I'd left my system on last night, and found the bluescreen in the morning. This has been happening occasionally, over the past few days. Details: ================================================== Dump File : 022710-18236-01.dmp Crash Time : 2/27/2010 8:46:44 AM Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL Bug Check Code : 0x000000d1 Parameter 1 : 00000000`00001001 Parameter 2 : 00000000`00000002 Parameter 3 : 00000000`00000000 Parameter 4 : fffff880`06b5c0e1 Caused By Driver : athrxusb.sys Caused By Address : athrxusb.sys+760e1 File Description : Product Name : Company : File Version : Processor : x64 Computer Name : Full Path : C:\Windows\minidump\022710-18236-01.dmp Processors Count : 2 Major Version : 15 Minor Version : 7600 ================================================== HiJackThis ("[...]" indicates removed text; full log [posted to pastebin][1]): Logfile of Trend Micro HijackThis v2.0.2 Scan saved at 8:49:15 AM, on 2/27/2010 Platform: Unknown Windows (WinNT 6.01.3504) MSInternet Explorer: Internet Explorer v8.00 (8.00.7600.16385) Boot mode: Normal Running processes: C:\Windows\DAODx.exe C:\Program Files (x86)\Asus\EPU\EPU.exe C:\Program Files\Asus\TurboV\TurboV.exe C:\Program Files (x86)\PowerISO\PWRISOVM.EXE C:\Program Files (x86)\OpenOffice.org 3\program\soffice.exe C:\Program Files (x86)\OpenOffice.org 3\program\soffice.bin D:\Downloads\HijackThis.exe C:\Program Files (x86)\uTorrent\uTorrent.exe R1 - HKCU\Software\Microsoft\Internet Explorer\[...] [...] O2 - BHO: Java(tm) Plug-In 2 SSV Helper - {DBC80044-A445-435b-BC74-9C25C1C588A9} - C:\Program Files (x86)\Java\jre6\bin\jp2ssv.dll O4 - HKLM\..\Run: [HDAudDeck] C:\Program Files (x86)\VIA\VIAudioi\VDeck\VDeck.exe -r O4 - HKLM\..\Run: [StartCCC] "C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static\CLIStart.exe" MSRun O4 - HKLM\..\Run: [TurboV] "C:\Program Files\Asus\TurboV\TurboV.exe" O4 - HKLM\..\Run: [PWRISOVM.EXE] C:\Program Files (x86)\PowerISO\PWRISOVM.EXE O4 - HKLM\..\Run: [googletalk] C:\Program Files (x86)\Google\Google Talk\googletalk.exe /autostart O4 - HKLM\..\Run: [AdobeCS4ServiceManager] "C:\Program Files (x86)\Common Files\Adobe\CS4ServiceManager\CS4ServiceManager.exe" -launchedbylogin O4 - HKCU\..\Run: [uTorrent] "C:\Program Files (x86)\uTorrent\uTorrent.exe" O4 - HKUS\S-1-5-19\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-19\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'LOCAL SERVICE') O4 - HKUS\S-1-5-20\..\Run: [Sidebar] %ProgramFiles%\Windows Sidebar\Sidebar.exe /autoRun (User 'NETWORK SERVICE') O4 - HKUS\S-1-5-20\..\RunOnce: [mctadmin] C:\Windows\System32\mctadmin.exe (User 'NETWORK SERVICE') O4 - Startup: OpenOffice.org 3.1.lnk = C:\Program Files (x86)\OpenOffice.org 3\program\quickstart.exe O13 - Gopher Prefix: O23 - Service: @%SystemRoot%\system32\Alg.exe,-112 (ALG) - Unknown owner - C:\Windows\System32\alg.exe (file missing) O23 - Service: AMD External Events Utility - Unknown owner - C:\Windows\system32\atiesrxx.exe (file missing) O23 - Service: Asus System Control Service (AsSysCtrlService) - Unknown owner - C:\Program Files (x86)\Asus\AsSysCtrlService\1.00.02\AsSysCtrlService.exe O23 - Service: DeviceVM Meta Data Export Service (DvmMDES) - DeviceVM - C:\Asus.SYS\config\DVMExportService.exe O23 - Service: @%SystemRoot%\system32\efssvc.dll,-100 (EFS) - Unknown owner - C:\Windows\System32\lsass.exe (file missing) O23 - Service: ESET HTTP Server (EhttpSrv) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\EHttpSrv.exe O23 - Service: ESET Service (ekrn) - ESET - C:\Program Files\ESET\ESET NOD32 Antivirus\x86\ekrn.exe O23 - Service: @%systemroot%\system32\fxsresm.dll,-118 (Fax) - Unknown owner - C:\Windows\system32\fxssvc.exe (file missing) O23 - Service: FLEXnet Licens

    Read the article

  • Lost disk space in Windows 7, cannot find the missing

    - by Tsanders
    My hard drive is complaining it is low on disk space, but a strange thing seems to be happening: Explorer reports 10Gb of available space (on a 120 Gb hard disk), chkdsk in the command prompt does the same but if I use a disk space tool such as SpaceSniffer or WinDirStat, only 50Gb of data is found. My guess is that there somehow is a hold on a large block of disk space (but that's just a guess) because of a prior very large (40 Gb) download attempt that didn't complete. There isn't 40Gb of files on the drive (hidden or visible), yet Explorer insists that something is there. How can I claim back this hard disk drive (without formatting my hard disk)? SpaceMonger is providing a clue, reporting four unscannable folders which add up to 43Gb: C:\RRBackups C:\System Volume Information C:\Windows\Csc\v2.06 C:\Windows\System32\LogFiles\Wmi\RtBackup Does anybody know what these folders are for, and how I can claim back at least some space? Restore point claims about 4Gb, so that doesn't seem to be the main problem.

    Read the article

  • Active directory authentication for Ubuntu Linux login and cifs mounting home directories...

    - by Jamie
    I've configured my Ubuntu 10.04 Server LTS Beta 2 residing on a windows network to authenticate logins using active directory, then mount a windows share to serve as there home directory. Here is what I did starting from the initial installation of Ubuntu. Download and install Ubuntu Server 10.04 LTS Beta 2 Get updates # sudo apt-get update && sudo apt-get upgrade Install an SSH server (sshd) # sudo apt-get install openssh-server Some would argue that you should "lock sshd down" by disabling root logins. I figure if your smart enough to hack an ssh session for a root password, you're probably not going to be thwarted by the addition of PermitRootLogin no in the /etc/ssh/sshd_config file. If your paranoid or not simply not convinced then edit the file or give the following a spin: # (grep PermitRootLogin /etc/ssh/sshd_conifg && sudo sed -ri 's/PermitRootLogin ).+/\1no/' /etc/ssh/sshd_conifg) || echo "PermitRootLogin not found. Add it manually." Install required packages # sudo apt-get install winbind samba smbfs smbclient ntp krb5-user Do some basic networking housecleaning in preparation for the specific package configurations to come. Determine your windows domain name, DNS server name, and IP address for the active directory server (for samba). For conveniance I set environment variables for the windows domain and DNS server. For me it was (my AD IP address was 192.168.20.11): # WINDOMAIN=mydomain.local && WINDNS=srv1.$WINDOMAIN If you want to figure out what your domain and DNS server is (I was contractor and didn't know the network) check out this helpful reference. The authentication and file sharing processes for the Windows and Linux boxes need to have their clocks agree. Do this with an NTP service, and on the server version of Ubuntu the NTP service comes installed and preconfigured. The network I was joining had the DNS server serving up the NTP service too. # sudo sed -ri "s/^(server[ \t]).+/\1$WINDNS/" /etc/ntp.conf Restart the NTP daemon # sudo /etc/init.d/ntp restart We need to christen the Linux box on the new network, this is done by editing the host file (replace the DNS of with the FQDN of the windows DNS): # sudo sed -ri "s/^(127\.0\.0\.1[ \t]).*/\1$(hostname).$WINDOMAIN localhost $(hostname)/" /etc/hosts Kerberos configuration. The instructions that follow here aren't to be taken literally: the values for MYDOMAIN.LOCAL and srv1.mydomain.local need to be replaced with what's appropriate for your network when you edit the files. Edit the (previously installed above) /etc/krb5.conf file. Find the [libdefaults] section and change (or add) the key value pair (and it is in UPPERCASE WHERE IT NEEDS TO BE): [libdefaults] default_realm = MYDOMAIN.LOCAL Add the following to the [realms] section of the file: MYDOMAIN.LOCAL = { kdc = srv1.mydomain.local admin_server = srv1.mydomain.local default_domain = MYDOMAIN.LOCAL } Add the following to the [domain_realm] section of the file: .mydomain.local = MYDOMAIN.LOCAL mydomain.local = MYDOMAIN.LOCAL Conmfigure samba. When it's all said done, I don't know where SAMBA fits in ... I used cifs to mount the windows shares ... regardless, my system works and this is how I did it. Replace /etc/samba/smb.conf (remember I was working from a clean distro of Ubuntu, so I wasn't worried about breaking anything): [global] security = ads realm = MYDOMAIN.LOCAL password server = 192.168.20.11 workgroup = MYDOMAIN idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = yes winbind enum groups = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes client ntlmv2 auth = yes encrypt passwords = yes winbind use default domain = yes restrict anonymous = 2 Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start Setup the authentication. Edit the /etc/nsswitch.conf. Here are the contents of mine: passwd: compat winbind group: compat winbind shadow: compat winbind hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start At this point I could login, home directories didn't exist, but I could login. Later I'll come back and add how I got the cifs automounting to work. Numerous resources were considered so I could figure this out. Here is a short list (a number of these links point to mine own questions on the topic): Samba Kerberos Active Directory WinBind Mounting Linux user home directories on CIFS server Authenticating OpenBSD against Active Directory How to use Active Directory to authenticate linux users Mounting windows shares with Active Directory permissions Using Active Directory authentication with Samba on Ubuntu 9.10 server 64bit How practical is to authenticate a Linux server against AD? Auto-mounting a windows share on Linux AD login

    Read the article

  • Scientific Linux - mysql and apachefail to start on reboot

    - by Derek Deed
    Both mysqld and httpd fail to restart following a reboot of the server, although chkconfig --list shows both daemons set to on for run levels 2,3,4 & 5 All control is being exectuted via Webmin Reboot server – MySQl and Apache not running MySQL Database Server MySQL version 5.1.69 MySQL is not running on your system - database list could not be retrieved. Click this button to start the MySQL database server on your system with the command /etc/rc.d/init.d/mysqld start. This Webmin module cannot administer the database until it is started. Apache Webserver Apache version 2.2.15 Start Apache Search Docs.. Global configuration Existing virtual hosts Create virtual host Select all. | Invert selection. Default Server Defines the default settings for all other virtual servers, and processes any unhandled requests. Address Any Port Any Server Name Automatic Document Root /var/www/drupal Virtual Server Processes all requests on port 443 not handled by other virtual servers. Address Any Port 443 Server Name Automatic Document Root /var/www/drupal Select all. | Invert selection. chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart Apache chkconfig --list httpd httpd 0:off 1:off 2:on 3:on 4:on 5:on 6:off Manually Restart MySQL chkconfig --list mysqld mysqld 0:off 1:off 2:on 3:on 4:on 5:on 6:off Everything now running okay; but no difference in the chkconfig outputs above. Set chkconfig --levels 235 httpd on /etc/init.d/httpd start The same for mysqld but no change in operation. Log files show that the shutdown has been completed successfully; but there is no indication of the service restarting until it is executed manually: 131112 13:59:15 InnoDB: Starting shutdown... 131112 13:59:16 InnoDB: Shutdown completed; log sequence number 0 881747021 131112 13:59:16 [Note] /usr/libexec/mysqld: Shutdown complete 131112 13:59:16 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 131112 14:09:52 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 131112 14:09:52 InnoDB: Initializing buffer pool, size = 8.0M 131112 14:09:52 InnoDB: Completed initialization of buffer pool [Tue Nov 12 13:59:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 13:59:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 13:59:13 2013] [notice] Digest: done [Tue Nov 12 13:59:14 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations [Tue Nov 12 13:59:14 2013] [notice] caught SIGTERM, shutting down [Tue Nov 12 14:27:13 2013] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec) [Tue Nov 12 14:27:13 2013] [notice] Digest: generating secret for digest authentication ... [Tue Nov 12 14:27:13 2013] [notice] Digest: done [Tue Nov 12 14:27:13 2013] [notice] Apache/2.2.15 (Unix) DAV/2 PHP/5.3.3 mod_ssl/2.2.15 OpenSSL/1.0.0-fips configured -- resuming normal operations Is anyone able to shed any light on this problem, Cheers, Derek.

    Read the article

  • How rotate TomCat 6 logs on Windows every night

    - by Danilo Brambilla
    Hi all, our TomCat 6 is running on a Windows Server 2003 server producing some logs on Program Files\Apache Software Foundation\Tomcat 6.0\logs folder. Only catalina.YYYY-MM-DD.log rotates every night. Admin. Host-Manager. Jakarta. LocalHost. Manager. stderr. stdout does not roate and are dated at the last server restart date. These files are most empty and always locked. How can I set TomCat to rotate all these logs every night (if possible without server/service restart)? Thank you in advance for help.

    Read the article

< Previous Page | 140 141 142 143 144 145 146 147 148 149 150 151  | Next Page >