Search Results

Search found 4621 results on 185 pages for 'scott lock'.

Page 149/185 | < Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >

• Megacli is killing me, any help appreciated

  - by Stefan

  I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

  Read the article

• ASP.NET Web API - Screencast series with downloadable sample code - Part 1

  - by Jon Galloway

  There's a lot of great ASP.NET Web API content on the ASP.NET website at http://asp.net/web-api. I mentioned my screencast series in original announcement post, but we've since added the sample code so I thought it was worth pointing the series out specifically. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. So - let's watch them together! Grab some popcorn and pay attention, because these are short. After each video, I'll talk about what I thought was important. I'm embedding the videos using HTML5 (MP4) with Silverlight fallback, but if something goes wrong or your browser / device / whatever doesn't support them, I'll include the link to where the videos are more professionally hosted on the ASP.NET site. Note also if you're following along with the samples that, since Part 1 just looks at the File / New Project step, the screencast part numbers are one ahead of the sample part numbers - so screencast 4 matches with sample code demo 3. Note: I started this as one long post for all 6 parts, but as it grew over 2000 words I figured it'd be better to break it up. Part 1: Your First Web API [Video and code on the ASP.NET site] This screencast starts with an overview of why you'd want to use ASP.NET Web API: Reach more clients (thinking beyond the browser to mobile clients, other applications, etc.) Scale (who doesn't love the cloud?!) Embrace HTTP (a focus on HTTP both on client and server really simplifies and focuses service interactions) Next, I start a new ASP.NET Web API application and show some of the basics of the ApiController. We don't write any new code in this first step, just look at the example controller that's created by File / New Project. using System; using System.Collections.Generic; using System.Linq; using System.Net.Http; using System.Web.Http; namespace NewProject_Mvc4BetaWebApi.Controllers { public class ValuesController : ApiController { // GET /api/values public IEnumerable<string> Get() { return new string[] { "value1", "value2" }; } // GET /api/values/5 public string Get(int id) { return "value"; } // POST /api/values public void Post(string value) { } // PUT /api/values/5 public void Put(int id, string value) { } // DELETE /api/values/5 public void Delete(int id) { } } } Finally, we walk through testing the output of this API controller using browser tools. There are several ways you can test API output, including Fiddler (as described by Scott Hanselman in this post) and built-in developer tools available in all modern browsers. For simplicity I used Internet Explorer 9 F12 developer tools, but you're of course welcome to use whatever you'd like. A few important things to note: This class derives from an ApiController base class, not the standard ASP.NET MVC Controller base class. They're similar in places where API's and HTML returning controller uses are similar, and different where API and HTML use differ. A good example of where those things are different is in the routing conventions. In an HTTP controller, there's no need for an "action" to be specified, since the HTTP verbs are the actions. We don't need to do anything to map verbs to actions; when a request comes in to /api/values/5 with the DELETE HTTP verb, it'll automatically be handled by the Delete method in an ApiController. The comments above the API methods show sample URL's and HTTP verbs, so we can test out the first two GET methods by browsing to the site in IE9, hitting F12 to bring up the tools, and entering /api/values in the URL: That sample action returns a list of values. To get just one value back, we'd browse to /values/5: That's it for Part 1. In Part 2 we'll look at getting data (beyond hardcoded strings) and start building out a sample application.

  Read the article

• Upgrading Ubuntu to 9.04 breaks ATI video card driver, VESA and ati/radeon drivers

  - by Neil

  I upgraded my Ubuntu 8.10 to 9.04, and it not only broke the ATI proprietary fglrx driver, but also the ability to use the VESA or open-source ati or radeon drivers. I have an ATI RV610 which is an ATI Radeon HD 2400 XT. I have Linux Kernel 2.6.27-14-generic and 2.6.28-13-generic. With fglrx, vesa, ati and radeon, the Xserver hangs the machine as soon as it starts by invoking X or startx, which is seen by observing that caps lock doesn't work. There's nothing useful in /var/log/Xorg.0.log, no errors at all. This is with either kernel. When I download a new proprietary driver from ATI, I install it successfully on kernel 2.6.27, and it doesn't hang when X starts up, but it just shows a blank screen and does nothing. I also can't CTRL+ALT+Backspace out of X at this point. In all the years I've used ATI's Linux drivers, this has happened almost every time I've upgraded my kernel, but it's been fixable with much effort. This time I'm really stuck. Does anyone know how to fix these problems?

  Read the article

• Agile Database Techniques: Effective Strategies for the Agile Software Developer – book review

  - by DigiMortal

     Agile development expects mind shift and developers are not the only ones who must be agile. Every chain is as strong as it’s weakest link and same goes also for development teams. Agile Database Techniques: Effective Strategies for the Agile Software Developer by Scott W. Ambler is book that calls also data professionals to be part of agile development. Often are DBA-s in situation where they are not part of application development and later they have to survive large set of applications that all use databases different way. Of course, only some of these applications are not problematic when looking what database server has to do to serve them. I have seen many applications that rape database servers because developers have no clue what is going on in database (~3K queries to database per web application request – have you seen something like this? I have…) Agile Database Techniques covers some object and database design technologies and gives suggestions to development teams about topics they need help or assistance by DBA-s. The book is also good reading for DBA-s who usually are not very strong in object technologies. You can take this book as bridge between these two worlds. I think teams that build object applications that use databases should buy this book and try at least one or two projects out with Ambler’s suggestions. Table of contents Foreword by Jon Kern. Foreword by Douglas K. Barry. Acknowledgments. Introduction. About the Author. Part One: Setting the Foundation. Chapter 1: The Agile Data Method. Chapter 2: From Use Cases to Databases — Real-World UML. Chapter 3: Data Modeling 101. Chapter 4: Data Normalization. Chapter 5: Class Normalization. Chapter 6: Relational Database Technology, Like It or Not. Chapter 7: The Object-Relational Impedance Mismatch. Chapter 8: Legacy Databases — Everything You Need to Know But Are Afraid to Deal With. Part Two: Evolutionary Database Development. Chapter 9: Vive L’ Évolution. Chapter 10: Agile Model-Driven Development (AMDD). Chapter 11: Test-Driven Development (TDD). Chapter 12: Database Refactoring. Chapter 13: Database Encapsulation Strategies. Chapter 14: Mapping Objects to Relational Databases. Chapter 15: Performance Tuning. Chapter 16: Tools for Evolutionary Database Development. Part Three: Practical Data-Oriented Development Techniques. Chapter 17: Implementing Concurrency Control. Chapter 18: Finding Objects in Relational Databases. Chapter 19: Implementing Referential Integrity and Shared Business Logic. Chapter 20: Implementing Security Access Control. Chapter 21: Implementing Reports. Chapter 22: Realistic XML. Part Four: Adopting Agile Database Techniques. Chapter 23: How You Can Become Agile. Chapter 24: Bringing Agility into Your Organization. Appendix: Database Refactoring Catalog. References and Suggested Reading. Index.

  Read the article

• CopSSH SFTP -- limit users access to their home directory only

  - by bradvido

  Let me preface this by saying I've read and followed these instructions at the FAQ many times: http://www.itefix.no/i2/node/37 It does not do what the title claims... It allows every user access to every other user's home directory, as well as access to all subfolders below the copssh installation path. I'm only using this for SFTP access and I need my users to be sandboxed into only their home directory. If you know a fool-proof way to lock users down so they can see only their home directory and its subfolders, stop reading now and reply with the solution. The details: Here is exactly what i tried as I followed the FAQ. My copSSH installation directory is: C:\Program Files\CopSSH net localgroup sftp_users /ADD **Create a user group to hold all my SFTP users cacls c:\ /c /e /t /d sftp_users **For that group, deny access at the top level and all levels below cacls "C:\Program Files\CopSSH" /c /e /t /r sftp_users **Allow my user group access to the copSSH installation directory and its subdirectories For each sftp user, I create a new windows user account, then I: net localgroup sftp_users sftp_user_1 /add **Add my user to the group I've created Open the activate user wizard for CopSSH, choosing the user, "/bin/sftponly" and Remove copssh home directory if it exists **Remains checked Create keys for public key authentication **Remains checked Create link to user's real home directory **Remains checked This works, however, every user has access to every other user's home directory as well as the CopSSH root directory.... So I tried denying access for all users to the user home directory: cacls "C:\Program Files\CopSSH\home" /c /e /t /d sftp_users **Deny access for users to the user home directory Then I tried adding permissions on a user-by-user basis for each users home\username folder. However,these permission were not allowed by windows because of the above deny rule i created at the home directory was being inherited and over-riding my allow rule. The next step for me would be to remove the deny rule at the home directory and for each user folder, add a deny rule for every user it doesn't belong to, and add an allow rule for the one user it does belong to. However, as my user list gets long, this will become very cumbersome. Thanks for the help!

  Read the article

• Optional Parameters and Named Arguments in C# 4 (and a cool scenario w/ ASP.NET MVC 2)

  - by ScottGu

  [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] This is the seventeenth in a series of blog posts I’m doing on the upcoming VS 2010 and .NET 4 release. Today’s post covers two new language feature being added to C# 4.0 – optional parameters and named arguments – as well as a cool way you can take advantage of optional parameters (both in VB and C#) with ASP.NET MVC 2. Optional Parameters in C# 4.0 C# 4.0 now supports using optional parameters with methods, constructors, and indexers (note: VB has supported optional parameters for awhile). Parameters are optional when a default value is specified as part of a declaration.  For example, the method below takes two parameters – a “category” string parameter, and a “pageIndex” integer parameter.  The “pageIndex” parameter has a default value of 0, and as such is an optional parameter: When calling the above method we can explicitly pass two parameters to it: Or we can omit passing the second optional parameter – in which case the default value of 0 will be passed:   Note that VS 2010’s Intellisense indicates when a parameter is optional, as well as what its default value is when statement completion is displayed: Named Arguments and Optional Parameters in C# 4.0 C# 4.0 also now supports the concept of “named arguments”.  This allows you to explicitly name an argument you are passing to a method – instead of just identifying it by argument position.  For example, I could write the code below to explicitly identify the second argument passed to the GetProductsByCategory method by name (making its usage a little more explicit): Named arguments come in very useful when a method supports multiple optional parameters, and you want to specify which arguments you are passing.  For example, below we have a method DoSomething that takes two optional parameters: We could use named arguments to call the above method in any of the below ways: Because both parameters are optional, in cases where only one (or zero) parameters is specified then the default value for any non-specified arguments is passed. ASP.NET MVC 2 and Optional Parameters One nice usage scenario where we can now take advantage of the optional parameter support of VB and C# is with ASP.NET MVC 2’s input binding support to Action methods on Controller classes. For example, consider a scenario where we want to map URLs like “Products/Browse/Beverages” or “Products/Browse/Deserts” to a controller action method.  We could do this by writing a URL routing rule that maps the URLs to a method like so: We could then optionally use a “page” querystring value to indicate whether or not the results displayed by the Browse method should be paged – and if so which page of the results should be displayed.  For example: /Products/Browse/Beverages?page=2. With ASP.NET MVC 1 you would typically handle this scenario by adding a “page” parameter to the action method and make it a nullable int (which means it will be null if the “page” querystring value is not present).  You could then write code like below to convert the nullable int to an int – and assign it a default value if it was not present in the querystring: With ASP.NET MVC 2 you can now take advantage of the optional parameter support in VB and C# to express this behavior more concisely and clearly.  Simply declare the action method parameter as an optional parameter with a default value: C# VB If the “page” value is present in the querystring (e.g. /Products/Browse/Beverages?page=22) then it will be passed to the action method as an integer.  If the “page” value is not in the querystring (e.g. /Products/Browse/Beverages) then the default value of 0 will be passed to the action method.  This makes the code a little more concise and readable. Summary There are a bunch of great new language features coming to both C# and VB with VS 2010.  The above two features (optional parameters and named parameters) are but two of them.  I’ll blog about more in the weeks and months ahead. If you are looking for a good book that summarizes all the language features in C# (including C# 4.0), as well provides a nice summary of the core .NET class libraries, you might also want to check out the newly released C# 4.0 in a Nutshell book from O’Reilly: It does a very nice job of packing a lot of content in an easy to search and find samples format. Hope this helps, Scott

  Read the article

• Expression Studio 4 - without SketchFlow&hellip;

  - by mbcrump

  is kinda like an explosion with no “Ka-Boom”… I was excited to hear the news yesterday at Microsoft Teched that Expression Studio 4 had officially launched. MSDN subscribers could log in and download the full release. So, I logged into my MSDN account and started downloading Expression Studio 4 Premium thinking that I was only minutes away from trying out SketchFlow 4. To my dismay, I launched Blend 4 and noticed it did not say SketchFlow on the splash screen. So, I went to New Project and the template was not available. After some digging around on the net, I learned my premium MSDN subscription did not include SketchFlow and I would need to purchase the Ultimate Edition. Below is a excerpt directly from Microsoft: Q: What products are included in the Microsoft Expression Studio 4 Ultimate? A: Expression Studio 4 Ultimate is comprised of 4 products, Expression Web 4, Microsoft Expression Blend® 4 + SketchFlow, Expression Encoder 4 Pro and Expression Design 4. Expression Blend 4 includes SketchFlow in Expression Studio 4 Ultimate product only. Q: What products are included in the Microsoft Expression Studio 4 Premium? A: Expression Studio 4 Premium is comprised of 4 products, Expression Web 4, Microsoft Expression Blend 4, Expression Encoder 4 and Expression Design 4. Expression Studio 4 Premium is not available for retail purchase. Q: What products are included in the Microsoft Expression Studio 4 Web Professional? A: Expression Studio 4 Web Professional is comprised of 3 products, Expression Web 4, Expression Encoder 4 and Expression Design 4. As you can see, we got screwed on this deal and plenty of people are complaining: Kiran Says: 6.07.2010 at 5:07 PM No SketchFlow for Expression Studio 4 Premium? What a bumper for Microsoft Partners!! Martin Says: 6.07.2010 at 6:18 PM Why does Expression Professional Subscription not include upgrades and new releases of Expression Studio. Good question hey. I bought my subscription 5 days ago thinking I would get what i purchased but no Expression upgrades or new releases for me, what a waste of money. I think I am not the only long term user of this software that feels disgruntled. Sorry john just had to tell someone. shaggygi Says: 6.07.2010 at 7:31 PM SketchFlow NOT included in Studio 4? WTF! I repeat.... WT...Freaking.... F! This is totally unacceptable. My development team purchased VS 2010 Premium w/ MSDN with the impression by Adam Kinney, Scott Guthrie, etc. that this would be included in the Premium package or some sort of free upgrade. I understand this is a Marketing thing, but come on! I believe, at very least, this should have been explained in detail before this release. John Papa... as a rep to give feedback to the team... Please please and please.... tell powers-at-be to fix this problem. Sorry for the rant. Besides this issue, I believe it is a very good product:) Thanks Vaclav Elias Says: 6.08.2010 at 4:30 AM Well, I am also not happy that SketchFlow is only for the chosen ones :-) It is very nice product. Actually, kind of foundation for web development so they could really support any MSDN subscribers.. :-( I am hoping that Microsoft will make this right for all of us with MSDN premier subscriptions. In the meantime,  you can check out the 5 day training series available here.

  Read the article

• So No TECH job so far.

  - by Ratman21

  O I found some temp work for the US Census and I have managed to keep the house (so far) but, it looks like I/we are going to have to do a short sale and the temp job will be ending soon.   On top of that it looks like the unemployment fund for me is drying up. I will have about one month left after the Census job is done. I am now down to Appling for work at the KFC.   This is type a work I started with, before I was a tech geek and really I didn’t think I would be doing this kind of work in my later years but, I have a wife and kid. So I got to suck it up and do it.   Oh and here is my new resume…go ahead I know you want to tare it up. I really don’t care any more.   Scott L. Newman 45219 Dutton Way, Callahan, FL32011 H: (904)879-4880 C: (352)356-0945 E: [email protected] Web:  http://beingscottnewman.webs.com/                                                       ______                                                                                 OBJECTIVE To obtain a Network or Technical support position     KEYWORD SUMMARY CompTIA A+, Network+, and Security+ Certified., Network Operation, Technical Support, Client/Vendor Relations, Networking/Administration, Cisco Routers/Switches, Helpdesk, Microsoft Office Suite, Website Design/Dev./Management, Frame Relay, ISDN, Windows NT/98/XP, Visio, Inventory Management, CICS, Programming, COBOL IV, Assembler, RPG   QUALIFICATIONS SUMMARY Twenty years’ experience in computer operations, technical support, and technical writing. Also have two and half years’ experience in internet / intranet operations.   PROFESSIONAL EXPERIENCE October 2009 – Present*   Volunteer Web site and PC technician – Part time       True Faith Christian Fellowship Church – Callahan, FL, Project: Create and maintain web site for Church to give it a worldwide exposure Aug 2008 – September 2009:* Volunteer Church sound and video technician – Part time      Thomas Creek Baptist Church – Callahan, FL   *Note Jobs were for the learning and/or keeping updated on skills, while looking for a tech job and training for new skills.   February 2005 to October 2008: Client Server Dev/Analyst I, Fidelity National Information Services, Jacksonville, FL (FNIS acquired Certegy in 2005 and out of 20 personal, was one of three kept on.) August 2003 to February 2005: Senior NetOps Operator, Certegy, St.Pete, Fl. (August 2003, Certegy terminated contract with EDS and out of 40 personal, was one of six kept on.) Projects: Creation and update of listing and placement for all raised floor equipment at St.Pete site. Listing was made up of, floor plan of the raised floor and equipment racks diagrams showing the placement of all devices using Visio. This was cross-referenced with an inventory excel document showing what dept was responsible for each device. Sole creator of Network operation and Server Operation procedures guide (NetOps Guide).  Expertise: Resolving circuit and/or router issues or assist circuit carrier in resolving issue from the company Network Operation Center (NOC). As well as resolving application problems or assist application support in resolution of it.     July 1999 to August 2003: Senior NetOps Operator,EDS (Certegy Account), St.Pete, FL Same expertise and on going projects as listed above for FNIS/Certegy. (Equifax outsourced the NetOps dept. to EDS in 1999)         January 1991 to July 1999: NetOps/Tandem Operator, Equifax, St.Pete & Tampa, FL Same as all of the above for FNIS/Certegy/EDS except for circuit and router issues   EDUCATION ? New Horizons Computer Learning Center, Jacksonville, Florida - CompTIA A+, Security+, and     Network+ Certified.                        Currently working on CCNA Certification 07/30/10 ? Mott Community College, Flint, Michigan – Associates Degree - Data Processing and General Education ? Currently studying Japanese

  Read the article

• snmpd dead but subsys locked

  - by Hina NMS

  Hi folks I have an NMS and a Client machine. I want the client to send traps to the NMS. I have been configuring the snmpd.conf file testing if i disable a process do i receive an alert or not. For the changes to reflect that were made in the conf file i restarted the snmpd daemon each time. The testing was going fine. All of a sudden when i restarted snmpd i recieved the error msg "snmpd dead but subsys locked". I googled for answer as to what it actually meant and found out that when a service is started a logfile is created in the /var/lock/subsys. Sometimes if the service is not stopped properly or whatever the logfile remains created. Though i started/stopped the snmpd service properly it didnt go away so i removed the file manually (via rm cmd). when i checked the status the error "snmpd dead but subsys locked" was gone. On my NMS i recieved the alert of snmpd coldstart. i started the snmpd service everything goes fine! BUT after 5 mins again i recieve the same error message and this keeps on happening..what do i need to do now?

  Read the article

• ASP.NET MVC, Web API, Razor, e Open Source (Código Aberto)

  - by Leniel Macaferi

  A Microsoft tornou o código fonte da ASP.NET MVC disponível sob uma licença open source (de código aberto) desde a primeira versão V1. Nós também integramos uma série de grandes tecnologias de código aberto no produto, e agora entregamos jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js e JSON.NET como parte integrante dos lançamentos da ASP.NET MVC. Estou muito animado para anunciar hoje que também iremos liberar o código fonte da ASP.NET Web API e ASP.NET Web Pages (também conhecido como Razor) sob uma licença open source (Apache 2.0), e que iremos aumentar a transparência do desenvolvimento de todos os três projetos hospedando seus repositórios de código no CodePlex (usando o novo suporte ao Git anunciado na semana passada - em Inglês). Isso permitirá um modelo de desenvolvimento mais aberto, onde toda a comunidade será capaz de participar e fornecer feedback nos checkins (envios de código), corrigir bugs, desenvolver novos recursos, e construir e testar os produtos diariamente usando a versão do código-fonte e testes mais atualizada possível. Nós também pela primeira vez permitiremos que os desenvolvedores de fora da Microsoft enviem correções e contribuições de código que a equipe de desenvolvimento da Microsoft irá rever para potencial inclusão nos produtos. Nós anunciamos uma abordagem de desenvolvimento semelhantemente aberta com o Windows Azure SDK em Dezembro passado, e achamos que essa abordagem é um ótimo caminho para estreitar as relações, pois permite um excelente ciclo de feedback com os desenvolvedores - e, finalmente, permite a entrega de produtos ainda melhores, como resultado. Muito importante - ASP.NET MVC, Web API e o Razor continuarão a ser totalmente produtos suportados pela Microsoft que são lançados tanto independentemente, bem como parte do Visual Studio (exatamente da mesma maneira como é feito hoje em dia). Eles também continuarão a ser desenvolvidos pelos mesmos desenvolvedores da Microsoft que os constroem hoje (na verdade, temos agora muito mais desenvolvedores da Microsoft trabalhando na equipe da ASP.NET). Nosso objetivo com o anúncio de hoje é aumentar ainda mais o ciclo de feedback/retorno sobre os produtos, para nos permitir oferecer produtos ainda melhores. Estamos realmente entusiasmados com as melhorias que isso trará. Saiba mais Agora você pode navegar, sincronizar e construir a árvore de código fonte da ASP.NET MVC, Web API, e Razor através do website http://aspnetwebstack.codeplex.com.  O repositório Git atual no site refere-se à árvore de desenvolvimento do marco RC (release candidate/candidata a lançamento) na qual equipe vem trabalhando nas últimas semanas, e esta mesma árvore contém ambos o código fonte e os testes, e pode ser construída e testada por qualquer pessoa. Devido aos binários produzidos serem bin-deployable (DLLs instaladas diretamente na pasta bin sem demais dependências), isto permite a você compilar seus próprios builds e experimentar as atualizações do produto, tão logo elas sejam adicionadas no repositório. Agora você também pode contribuir diretamente para o desenvolvimento dos produtos através da revisão e envio de feedback sobre os checkins de código, enviando bugs e ajudando-nos a verificar as correções tão logo elas sejam enviadas para o repositório, sugerindo e dando feedback sobre os novos recursos enquanto eles são implementados, bem como enviando suas próprias correções ou contribuições de código. Note que todas as submissões de código serão rigorosamente analisadas ??e testadas pelo Time da ASP.NET MVC, e apenas aquelas que atenderem a um padrão elevado de qualidade e adequação ao roadmap (roteiro) definido para as próximas versões serão incorporadas ao código fonte do produto. Sumário Todos nós da equipe estamos realmente entusiasmados com o anúncio de hoje - isto é algo no qual nós estivemos trabalhando por muitos anos. O estreitamento no relacionamento entre a comunidade e os desenvolvedores nos permitirá construir produtos ainda melhores levando a ASP.NET para o próximo nível em termos de inovação e foco no cliente. Obrigado! Scott P.S. Além do blog, eu uso o Twitter para disponibilizar posts rápidos e para compartilhar links. Meu apelido no Twitter é: @scottgu Texto traduzido do post original por Leniel Macaferi.

  Read the article

• backupexec 12.5 not following symlinks on linux agent

  - by Peter Carrero

  Ok, we are at a loss here trying to backup a linux box to a backupexec server... we got a backupexec 12.5 server and a "backupexec for windows servers linux agent" (sigh) running on one of our linux boxes. When a backup runs, we get exceptions reported for our symbolic links. it says something like: BACKUP- \\<servername>\[ROOT] File \\<servername>\[ROOT]/<foldername>/<symlink> is in the backup selection list but was not found. Looking at the selection list, the symlink shows as a 1k file on BUE. Tools-Options-Backup has Backup files and directories by following symbolic links/junction points selected. These same checkboxes are selected on the Job Setup-Job Properties-Edit Template-Advanced Additionally, all the checkboxes are checkeced on Tools-Options-Linux, Unix, and Macintosh and on the Job Set-Job Properties-Edit Template-Linux, Unix, and Macintosh. These checkboxes read: "Preserve change time", "Follow local mount points", "Follow remote mount points", "Backup contents of soft-linked directories" and "Lock remote files", but apparently changing those options produce the same result. Any help on how to get BUE to make a proper backup would be greatly appreciated. Thanks.

  Read the article

• Is anyone using KVM in production?

  - by Andy Shellam

  I've been trying to set up a pair of servers utilising KVM on Ubuntu 9.10 to host 8 virtual machines between them and ended up with various issues from the VMs freezing, to not powering on. I had one virtual server set up and running and was setting up a second, when any operation involving OpenSSL would cause the VM to lock up in a weird way - all network traffic would cease, it wouldn't process logins on the console, but it wasn't taking any CPU time off the host. The first virtual server was identical and worked perfectly. Another VM I tried to setup had installed Ubuntu fine then refused to reboot, throwing kernel exceptions to do with XFS. I've now installed Citrix XenServer 5.5 on both hosts, and am now setting up my third VM with absolutely no issues. I also had the same experience when I tried VMware, but I preferred Xen as it appears to give more features on the free license. My question is am I just unlucky with KVM, or is KVM as unstable as it appears? Are you using, or planning on using, KVM in production, and how successful have you been?

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• Samba Server Make Multiple User Permissions Profiles

  - by Scriptonaut

  I have a Samba file server running, and I was wondering how I could make multiple user accounts that have different permissions. For example, at the moment I have a user, smbusr, but when I ssh to the share, I can read, write, execute, and even navigate out of the samba directory and do stuff on the actual computer. This is bad because I want to be able to give out my IP so friends/family can use the server, but I don't want them to be able to do just anything. I want to lock the user in the samba share directory(and all the sub directories). Eventually I would like several profiles such as (smbusr_R, smbusr_RW, smbguest_R, smbguest_RW). I also have a second question related to this, is SSH the best method to connect from other unix machines? What about VPN? Or simply mounting like this: mount -t ext3 -o user=username //ipaddr/share /mnt/mountpoint Is that mounting command above the same thing as a vpn? This is really confusing me. Thanks for the help guys, let me know if you need to see any files, or need anymore information.

  Read the article

• Could not continue scan with NOLOCK due to data movement during installation

  - by dbdev1

  Hi, I am running Windows Server 2008 Standard Edition R2 x64 and I installed SQL Server 2008 Developer Edition. All of the preliminary checks run fine (Apart from a warning about Windows Firewall and opening ports which is unrelated to this and shouldn't be an issue - I can open those ports). Half way through the actual installation, I get a popup with this error: Could not continue scan with NOLOCK due to data movement. The installation still runs to completion when I press ok. However, at the end, it states that the following services "failed": database engine services sql server replication full-text search reporting services How do I know if this actually means that anything from my installation (which is on a clean Windows Server setup - nothing else on there, no previous SQL Servers, no upgrades, etc) is missing? I know from my programming experience that locks are for concurrency control and the Microsoft help on this issue points to changing my query's lock/transactions in a certain way to fix the issue. But I am not touching any queries? Also, now that I have installed the app, when I login, I keep getting this message: TITLE: Connect to Server Cannot connect to MSSQLSERVER. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) (Microsoft SQL Server, Error: 67) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=67&LinkId=20476 BUTTONS: OK I went into the Configuration Manager and enabled named pipes and restarted the service (this is something I have done before as this message is common and not serious). I have disabled Windows Firewall temporarily. I have checked the instance name against the error logs. Please advise on both of these errors. I think these two errors are related. Thanks

  Read the article

• Setting up SQL Server 2005 to use all available memory in 32bit Windows Server 2003 - and verifying

  - by Rizwan Kassim

  There are a number of questions along this line - but they either sometimes contradict each other, or don't show how to properly verify that everything is actually working - hopefully this can be comprehensive... I'm running SQL Server 2005 SP3 Standard on Windows Server 2003 R2 Standard. My server has 8GB of memory installed - my system is almost entirely used as a Database Server - there are some services running on them, but the OS + services can run within 1Gb of RAM. What I've done (please tell me if I'm doing something wrong): /3GB in the boot.ini. (To increase the amount of user-space memory available - info) /PAE in the boot.ini. (Windows claimed to be doing PAE even without this switch, somethow.) Enabled AWE in SQL Server. Enabled Lock Pages in Memory Option for users SYSTEM and Local Service. (info). SQL Server Standard doesn't seem to use this until Cumulative Update 4, which isn't installed on my server. (info) Set Min/Max Memory to : 1024Mb/5112Mb After doing all the above, we definately saw a level of improvement - but I'd like now to verify my settings, make sure that I'm making full use of the memory available. (There appeared to be a slowdown when max = 7Gb, so I edged off from that value, but it might have been just perceptual.) To verify, I checked the following levels in PerfMon : Process(sqlserv):Working Set : 76386304 SQL Server(Memory Manager) : Total Server Memory : 3538944 (I saw a doc that noted that this wasn't the full memory used by SQL Server, so I'm not sure whether to trust it) So -- my questions... Should my max be around 7Gb? If not, what should it be? Why is total server memory at 3.5G, when it's been allocated 5G? What is the proper metric for the amount of memory allocated to SQL Server? The Working Set seems a bit large... Am I possibly missing any steps in the setup? Any recommended resources on starting to tune the caching system now? Thanks

  Read the article

• installing SVN - CentOS - cannot find -lexpat

  - by furnace

  Hey guys, I'm trying to install SVN on CentOS 5. Unfortunately a simple yum install isn't going to work (afaik) because I'm using the DirectAdmin control panel. When it comes to running 'make' I get this error: /usr/bin/ld: cannot find -lexpat I'm new to installing things without yum (!) so am a bit lost. Do you have any advice on how to get past this hurdle? Just to give a little more context to the error; /apache -I/usr/include/apache -I/etc/svn-install/subversion-1.6.2/sqlite-amalgamation -o subversion/svn/util.o -c subversion/svn/util.c cd subversion/svn && /bin/sh /etc/svn-install/subversion-1.6.2/libtool --tag=CC --silent --mode=link gcc -g -O2 -g -O2 -pthread -rpath /usr/lib -o svn add-cmd.o blame-cmd.o cat-cmd.o changelist-cmd.o checkout-cmd.o cleanup-cmd.o commit-cmd.o conflict-callbacks.o copy-cmd.o delete-cmd.o diff-cmd.o export-cmd.o help-cmd.o import-cmd.o info-cmd.o list-cmd.o lock-cmd.o log-cmd.o main.o merge-cmd.o mergeinfo-cmd.o mkdir-cmd.o move-cmd.o notify.o propdel-cmd.o propedit-cmd.o propget-cmd.o proplist-cmd.o props.o propset-cmd.o resolve-cmd.o resolved-cmd.o revert-cmd.o status-cmd.o status.o switch-cmd.o tree-conflicts.o unlock-cmd.o update-cmd.o util.o ../../subversion/libsvn_client/libsvn_client-1.la ../../subversion/libsvn_wc/libsvn_wc-1.la ../../subversion/libsvn_ra/libsvn_ra-1.la ../../subversion/libsvn_delta/libsvn_delta-1.la ../../subversion/libsvn_diff/libsvn_diff-1.la ../../subversion/libsvn_subr/libsvn_subr-1.la /etc/httpd/lib/libaprutil-1.la -lexpat /etc/httpd/lib/libapr-1.la -luuid -lrt -lcrypt -lpthread -ldl /usr/bin/ld: cannot find -lexpat collect2: ld returned 1 exit status make: *** [subversion/svn/svn] Error 1 Thanks!

  Read the article

• Using the ASP.NET Membership API with SQL Server / SQL Azure: The new &ldquo;System.Web.Providers&rdquo; namespace

  - by Harish Ranganathan

  The Membership API came in .NET 2.0 and was a huge enhancement in building web applications with users, managing roles, permissions etc.,  The Membership API by default uses SQL Express and until Visual Studio 2008, it was available only through the ASP.NET Configuration manager screen (Website – ASP.NET Configuration) or (Project – ASP.NET Configuration) and for every application, one has to manually visit this place to start using the Security and other settings.  Upon doing that the default SQL Express database aspnet.mdf is created to store all the user profiles. Starting Visual Studio 2010 and .NET 4.0, the Default Website template includes the Membership API controls as a part of the page i.e. When you create a “File – New – ASP.NET Web Application” or an “ASP.NET MVC Application”, by default the Login/Register controls are enabled in the MasterPage and they are termed under “ApplicationServices” setting in the web.config file with connection string pointed to the SQL Express database. In fact, when you run the default website and click on “Logon” –> “Register”, and enter the details for registration and click “Register”, that is the time the aspnet.mdf file is created with the tables for Users, Roles, UsersInRoles, Profile etc., Now, this uses the default SQL Express database within the App_Data folder.  If you want to move your Membership information to some other database such as SQL Server, SQL CE or SQL Azure, you need to manually run the aspnet_regsql command and specify the destination database name. This would create all the Tables, Procedures and Views required to handle the Membership information.  Thereafter you can change the connection string for “ApplicationServices” to point to the database where you had run all the scripts. Now, enter “System.Web.Providers” Alpha. This is available as a part of the NuGet package library.  Scott Hanselman has a neat post describing the steps required to get it up and running as well as doing the basic changes  at http://www.hanselman.com/blog/IntroducingSystemWebProvidersASPNETUniversalProvidersForSessionMembershipRolesAndUserProfileOnSQLCompactAndSQLAzure.aspx Pretty much, it covers what the new System.Web.Providers do. One thing I wanted to clarify is that, the new “System.Web.Providers” add a lot of new settings which are also marked as the defaults, in the web.config.  Even now, they use SQL Express as the default database.  But, if you change the connection string for “DefaultConnection” under connectionStrings to point to your SQL Server or SQL Azure, Membership API would now be able to create all the tables, procedures and views at the destination specified (i.e. SQL Server or SQL Azure). In my case, I modified the DefaultConneciton to point to my SQL Azure database.  Next, I hit F5 to run the application.  The default view loads.  I clicked on “LogOn” and then “Register” since I knew there are no tables/users as of then.  One thing to note is that, I had put “NewDB” as the database name in the connection string that points to SQL Azure.  NewDB wasn’t existing and I would assume it would be created before the tables/views/procedures for Membership are created. Once I clicked on the “Register” to register my first username, it took a while and then registered as well as logged in me in.  Also, I went to the SQL Azure Management Portal and verified that there exists “NewDB” which has just been created I could also connect to the SQL Azure database “NewDB” from Management Studio and found that the tables now don’t have the aspnet_ prefix.  The tables were simply Users, Roles, UsersInRoles, Profiles etc., So, with a few clicks and configuration change, I could actually set up the user base for my application on SQL Azure and even make the SessionState, Roles, Profiles being stored in SQL Azure database. The new System.Web.Proivders also required MARS (MultipleActiveResultSets=true) setting since it uses Entity Framework for the DAL operations.  Also, the “Project – ASP.NET Configuration” screen can be used to further create/manage users/roles etc., although the data is stored on the remote database. With that, a long pending request from the community to have the ability to configure and use remote databases for Application users management without having to run the scripts from SQL Express is fulfilled. Cheers !!!

  Read the article

• A Letter for Your CEO About Social Marketing’s Future

  - by Mike Stiles

  We’ll leave it to you to decide if or how to sneak this in front of them. Dear Chief: This social marketing thing looks serious. It’s gone beyond having a Facebook page and putting our info and a few promotions on it. It’s seriously disrupting how we’ve always done marketing. And its implications reach well beyond marketing. My concern is that we stay positioned ahead of these changes and are prepared to embrace, adapt and capitalize on these new capabilities as opposed to spending valuable time and money trying to shoehorn social into “the way we’ve always done things.” I’m also concerned about what happens if our competition executes on this before we do. The days of being able to impose our ad messaging on the masses to great effect are numbered. The public now has the tech tools and ability to filter out things that are irrelevant to them. And frankly, spending ad dollars to reach unlikely prospects isn’t the most efficient path for us either. Today, our customers have to genuinely love what we do. That starts with a renewed, customer-centric focus on the quality and usability of our product. If their experience with it is bad, they now have very connected, loud voices that will testify against us. We can’t afford that. Next, their customer service experience, before and after the sale, has to be a pleasant surprise. That requires truly knowing our customers and listening to them. Lip service won’t cut it. We have to get and use as much data on the customer as possible, interact with them wherever they want to interact with us, and commit to impressing them. If we do, they’ll get out there and advertise for us. Since peer-to-peer recommendation is the most effective marketing, that’s money in the bank. Social marketing is about forming relationships, same as how individuals use social. We want them to know us, trust us, and get real value from knowing us. That requires honesty and transparency that before now might have been uncomfortable. I propose that if we clearly make everything we do about our customers’ wants and needs, we’ll have nothing to hide. It will solidify customer loyalty, retention, and thus, revenue. These things can’t happen without certain tools and structural changes in the organization. There are social cloud platforms that integrate social management into all of the necessary areas: CRM, customer service, sales, marketing automation, content marketing, ecommerce, etc. This is will give us a real-time, complete view of the customer so their every interaction with us is attentive, personalized, accurate, relevant, and satisfying. Without it, we’re just a collage of disjointed systems, each gathering data that informs only its own departmental silo. The customer is voluntarily giving us everything we need to know about them to win them over, but we have to start listening and putting the pieces together. There’s still time. Brands are coming to terms with this transition to the socially enabled enterprise, but so far they aren’t moving very fast. Like us, they’re dealing with long-entrenched technologies and processes. CMO’s and CIO’s have to form new partnerships. Content operations have to be initiated and properly staffed and funded. Various departments must be able to utilize interconnected big data. What will separate the winners from the losers? Well chief, that’s why I’m writing you. It’s in your hands. These initiatives won’t get the kind of priority and seriousness that inspire actual deadlines & action unless they come from your desk. You have to be the champion of customer centricity. You have to be our change agent. You have to be our innovator. Otherwise, it’s going to be business as usual, and that puts us in a very vulnerable place. Sincerely, Your Team @mikestilesPhoto: Gary Scott, stock.xchng

  Read the article

• Visual Studio 2010 SP1

  - by ScottGu

  Last week we shipped Service Pack 1 of Visual Studio 2010 and the Visual Studio Express Tools.  In addition to bug fixes and performance improvements, SP1 includes a number of feature enhancements.  This includes improved local help support, IntelliTrace support for 64-bit applications and SharePoint, built-in Silverlight 4 Tooling support in the box, unit testing support when targeting .NET 3.5, a new performance wizard for Silverlight, IIS Express and SQL CE Tooling support for web projects, HTML5 Intellisense for ASP.NET, and more.  TFS 2010 SP1 was also released last week, together with a new TFS Project Server Integration Pack and Load Test Feature Pack.  Brian Harry has a good blog post about the TFS updates here. VS 2010 SP1 Download Click here to download and install SP1 for all versions of Visual Studio (including express).  This installer examines what you have installed on your machine, and only downloads the servicing downloads necessary to update them to SP1.  The time it takes to download and update will consequently depend on what all you have installed.  Jon Galloway has a good blog post on tips to speed up the SP1 install by uninstalling unused components. Web Platform Installer Bundles In addition to the core VS 2010 SP1 installer, we have also put together two Web Platform Installer (WebPI) bundles that automate installing SP1 together with additional web-specific components: VS 2010 SP1 WebPI Bundle Visual Web Developer 2010 SP1 WebPI Bundle The above WebPI bundles automate installing: VS 2010/VWD 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 Only the components that are not already installed on your machine will be downloaded when you use the above WebPI bundles.  This means that you can run the WebPI bundle at any time (even if you have already installed SP1 or ASP.NET MVC 3) and not have to worry about wasting time downloading/installing these components again. Earlier this year I did two posts that discussed how to use IIS Express and SQL CE with ASP.NET projects in SP1.  Read the below posts to learn more about how to use them after you run the above bundles: Visual Studio 2010 SP1 and IIS Express Visual Studio 2010 SP1 and SQL CE for ASP.NET The above feature additions work with any web project type – including both ASP.NET Web Forms and ASP.NET MVC. Additional SP1 Notes Two additional notes about VS 2010 SP1: 1) One change we made between RTM and SP1 is that by default Visual Studio now uses software rendering instead of hardware acceleration when running on Windows XP.  We made this change because we’ve seen reports of (often inconsistent) performance issues caused by older video drivers.  Running in software mode eliminates these and delivers consistent speeds.  You can optionally re-enable hardware acceleration with SP1 using Visual Studio’s Tools->Options menu command – we did not remove support for HW acceleration on XP, we simply changed the default setting for it.  Jason Zander has written more details on the change and how to re-enable HW acceleration inside VS here. 2) We have discovered an issue where installing SP1 can cause TSQL intellisense within SQL Server Management Studio 2008 R2 to stop working (typing still works – but intellisense doesn’t show up).  The SQL team is investigating this now and I’ll post an update on how to fix this once more details are known.  Hope this helps, Scott P.S. I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• Silverlight Cream for May 15, 2010 -- #862

  - by Dave Campbell

  In this Issue: Victor Gaudioso, Antoni Dol(-2-), Brian Genisio, Shawn Wildermuth, Mike Snow, Phil Middlemiss, Pete Brown, Kirupa, Dan Wahlin, Glenn Block, Jeff Prosise, Anoop Madhusudanan, and Adam Kinney. Shoutouts: Victor Gaudioso would like you to Checkout my Interview with Microsoft’s Murray Gordon at MIX 10 Pete Brown announced: Connected Show Podcast #29 With … Me! From SilverlightCream.com: New Silverlight Video Tutorial: How to Create Fast Forward for the MediaElement Victor Gaudioso's latest video tutorial is on creating the ability to fast-forward a MediaElement... check it out in the tutorial player itself! Overlapping TabItems with the Silverlight Toolkit TabControl Antoni Dol has a very cool tutorial up on the Toolkit TabItems control... not only is he overlapping them quite nicely but this is a very cool tutorial... QuoteFloat: Animating TextBlock PlaneProjections for a spiraling effect in Silverlight Antoni Dol also has a Blend tutorial up on animating TextBlock items... run the demo and you'll want to read the rest :) Adventures in MVVM – My ViewModel Base – Silverlight Support! Brian Genisio continues his MVVM tutorials with this update on his ViewModel base using some new C# 4.0 features, and fully supports Silverlight and WPF My Thoughts on the Windows Phone 7 Shawn Wildermuth gives his take on WP7. He included a port of his XBoxGames app to WP7 ... thanks Shawn! Silverlight Tip of the Day #20 – Using Tooltips in Silverlight I figured Mike Snow was going to overrun me with tips since I have missed a couple days, but there's only one! ... and it's on Tooltips. Animating the Silverlight opacity mask Phil Middlemiss has an article at SilverZine describing a Behavior he wrote (and is sharing) that turns a FrameworkElement into an opacity mask for it's parent container... cool demo on the page too. Breaking Apart the Margin Property in Xaml for better Binding Pete Brown dug in on a Twitter message and put some thoughts down about breaking a Margin apart to see about binding to the individual elements. Building a Simple Windows Phone App Kirupa has a 6-part tutorial up on building not-your-typical first WP7 application... all good stuff! Integrating HTML into Silverlight Applications Dan Wahlin has a post up discussing three ways to display HTML inside a Silverlight app. Hello MEF in Silverlight 4 and VB! (with an MVVM Light cameo) Glenn Block has a post up discussing MEF, MVVM, and it's in VB this time... and it's actually a great tutorial top to bottom... all source included of course :) Understanding Input Scope in Silverlight for Windows Phone Jeff Prosise has a good post up on the WP7 SIP and how to set the proper InputScope to get the SIP you want. Thinking about Silverlight ‘desktop’ apps – Creating a Standalone Installer for offline installation (no browser) Anoop Madhusudanan is discussing something that's been floating around for a while... installing Silverlight from, say, a CD or DVD when someone installs your app. He's got some good code, but be sure to read Tim Heuer and Scott Guthrie's comments, and consider digging deeper into that part. Using FluidMoveBehavior to animate grid coordinates in Silverlight Adam Kinney has a cool post up on animating an object using the FluidMotionBehavior of Blend 4... looks great moving across a checkerboard... check out the demo, then grab the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Jetty - 401 Unauthorized when using basic authentication

  - by JP.

  I am running SOLR on jetty in Ubuntu (a bitnami VM, if that helps) and am trying to lock down access to both the admin pages and the update/delete/etc. pages using basic authentication. When I attempt to connect to the admin console via a web browser I am prompted for a user name and password, but the username and password I use simply does not work. For test purposes I am using foo:bar as the credentials, but I receive a '401 Unauthorized' response. I see the following in my request log. 127.0.0.1 - - [10/Nov/2013:05:35:46 +0000] "GET /solr/ HTTP/1.1" 401 1376 Am I doing something wrong and/or is there anything obviously incorrect with the below configuration? Any help is greatly appreciated. Jetty.xml <Call name="addBean"> <Arg> <New class="org.eclipse.jetty.security.HashLoginService"> <Set name="name">solr</Set> <Set name="config"><SystemProperty name="jetty.home" default="."/>/etc/realm.properties</Set> <Set name="refreshInterval">5</Set> </New> </Arg> </Call> /etc/realm.properties foo: bar, solr_admin webdefault.xml <security-constraint> <web-resource-collection> <url-pattern>/</url-pattern> </web-resource-collection> <auth-constraint> <role-name>solr_admin</role-name> </auth-constraint> </security-constraint> <login-config> <auth-method>BASIC</auth-method> <realm-name>solr</realm-name> </login-config>

  Read the article

• Blue screen of death while installing any Adobe Air application

  - by Gaurav Sharma

  Whenever I try to install an Air application I get a Blue Screen and then my system restarts. I cannot even take a screenshot of it. This happens with every air application I try to install. I also searched for the same on Adobe forums and found the same problem being faced by someone else. His problem was resolved by uninstalling a software named "Folder Lock". I searched my hard disk for this software and found one, so I deleted that software (shift+delete) and removed all it's traces from registry too but that still doesn't solved the problem. I also tried disabling the antivirus software and then install the air application but this also didn't helped. Here is the screenshot of the BSOD. I was able to install air applications earlier, but now I can't. Anybody having same sort of problem. One colleague of mine is also having the same problem. Please help me out. My system's config is as follows: Windows XP Home sp3 Flash Builder 4, with SDK 4.1, 3.5 installed in it. Adobe Air v 2.5 1.5 GB RAM 1.66 MHz processor Thanks

  Read the article

• what can be causes of http server crash?

  - by mithunmo

  Hello , I am using WAMP server on Windows XP. Apache 2.2.11 MySQL 5.1.36 (INNODB engine) PHP 5.3.0 I observe that my WAMP server crashes in the following scenarios IF I use a Low end PC ( low processor speed and low RAM) After making some changes to httpd.conf file .For eg changing the Allow from IP address . But here it crashes only once and then it starts to work fine. Random crashes CRASH LOG szAppName : httpd.exe szAppVer : 2.2.11.0 szModName : php5ts.dll szModVer : 5.3.0.0 offset : 0000c309 C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\httpd.exe.mdmp C:\DOCUME~1\blrcom\LOCALS~1\Temp\WERc677.dir00\appcompat.txt My questions Does high CPU utilization/LOW RAM can also cause the HTTP server to crash ? excessive file reading as in every 10 seconds ? unlimited script execution time . I have set the maximum execution time in php script to 0 as my script has to execute for sometimes 2-3 days. Is there any way to avoid this ? Access to Database ? Should we use lock before reading and writing Can these be the reasons for random wamp server crashes ? OR is is some other programming error ? Please guide me . Regards, Mithun

  Read the article

• ASP.NET MVC, Web API, Razor and Open Source

  - by ScottGu

  Microsoft has made the source code of ASP.NET MVC available under an open source license since the first V1 release. We’ve also integrated a number of great open source technologies into the product, and now ship jQuery, jQuery UI, jQuery Mobile, jQuery Validation, Modernizr.js, NuGet, Knockout.js and JSON.NET as part of it. I’m very excited to announce today that we will also release the source code for ASP.NET Web API and ASP.NET Web Pages (aka Razor) under an open source license (Apache 2.0), and that we will increase the development transparency of all three projects by hosting their code repositories on CodePlex (using the new Git support announced last week). Doing so will enable a more open development model where everyone in the community will be able to engage and provide feedback on code checkins, bug-fixes, new feature development, and build and test the products on a daily basis using the most up-to-date version of the source code and tests. We will also for the first time allow developers outside of Microsoft to submit patches and code contributions that the Microsoft development team will review for potential inclusion in the products. We announced a similar open development approach with the Windows Azure SDK last December, and have found it to be a great way to build an even tighter feedback loop with developers – and ultimately deliver even better products as a result. Very importantly - ASP.NET MVC, Web API and Razor will continue to be fully supported Microsoft products that ship both standalone as well as part of Visual Studio (the same as they do today). They will also continue to be staffed by the same Microsoft developers that build them today (in fact, we have more Microsoft developers working on the ASP.NET team now than ever before). Our goal with today’s announcement is to increase the feedback loop on the products even more, and allow us to deliver even better products.  We are really excited about the improvements this will bring. Learn More You can now browse, sync and build the source tree of ASP.NET MVC, Web API, and Razor on the http://aspnetwebstack.codeplex.com web-site.  The Git repository on the site is the live RC milestone development tree that the team has been working on the last several weeks, and the tree contains both the runtime sources + tests, and is buildable and testable by anyone.  Because the binaries produced are bin-deployable, this allows you to compile your own builds and try product updates out as soon as they are checked-in. You can also now contribute directly to the development of the products by reviewing and sending feedback on code checkins, submitting bugs and helping us verify fixes as they are checked in, suggesting and giving feedback on new features as they are implemented, as well as by submitting code fixes or code contributions of your own. Note that all code submissions will be rigorously reviewed and tested by the ASP.NET MVC Team, and only those that meet an extremely high bar for both quality and design/roadmap appropriateness will be merged into the source. Summary All of us on the team are really excited about today’s announcement – it has been something we’ve been working toward for many years.  The tighter feedback loop is going to enable us to build even better products, and take ASP.NET to the next level in terms of innovation and customer focus. Thanks, Scott P.S. In addition to blogging, I use Twitter to-do quick posts and share links. My Twitter handle is: @scottgu

  Read the article

< Previous Page | 145 146 147 148 149 150 151 152 153 154 155 156  | Next Page >