Search Results

Search found 4520 results on 181 pages for 'notice'.

Page 155/181 | < Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >

• Home ADSL Modem Dropping Packets?

  - by Cody

  I know this is supposed to be a "pro" forum, but I'm hoping someone can help since my ISP isn't doing much to try and fix things. My ISP has given me a DSL modem / Router combo - a ADB / Pirelli P.DG A2100N and I have a 4096 / 767 kbps connection. I use it purely as modem and router, and have the wireless AP feature turned off. I run it to a Ubiquiti Networks Toughswitch and use a Ubiquiti UAP as the wireless access point - although I've ran tests directly wired to the router with nothing else connected, and still see the same issues. I've been having issues where latency suddenly spikes from 8ms to google.com to 250+ if someone does anything on the internet. If I run a speedtest or something, I can see latencies above 3000ms. Regularly when downloading something, even if the speed is throttled to , it can get random drops to 0kbps every few seconds. Online gaming is impossible because I notice the sudden lag-outs in the connection, and video streams or VoIP drop out as well - it's not at all consistent. I managed to find the password to my modem and I don't think I see anything wrong with the settings - but I looked for the logs and found this: Jun 6 17:10:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:31 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: __ratelimit: 63 callbacks suppressed Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:10:40 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:22 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:23 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:24 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:25 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:29 user warn kernel: __ratelimit: 15 callbacks suppressed Jun 6 17:11:29 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:29 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:11:30 user warn kernel: nf_conntrack: table full, dropping packet. Jun 6 17:55:26 user warn kernel: bcmxtmcfg: OAM loopback response not received on VCC 1.1.3 Jun 6 17:55:27 user warn kernel: bcmxtmcfg: OAM loopback response not received on VCC 1.1.4 So, as I understand it, it appears the router is dropping packets? If that's the case, is there anything in the config that I can change? Or should I buy a new router, a new modem, or both?

  Read the article

• Dual head setup for Ubuntu 10.04.1 and Windows XP Pro with same hardware configuration

  - by mejpark

  I have a Dell OptiPlex 360 workstation at work, with 2 x ATI RV280 [Radeon 9200 PRO] graphics cards installed, which are attached to two identical 19" HII flat panel monitors. I'm using the open source Radeon driver with Ubuntu, and the proprietary drivers with Windows. The good news is that dual head configuration works for both OSes. The bad news is, I have to use a different hardware configuration for each OS to achieve this. Hardware config #1: Dual monitors work for Windows XP Pro like this: First display -> external VGA port Second display -> DVI input on gfx card Hardware config #2: Dual monitors work for Ubuntu 10.04.1 like this: First display -> VGA port on gfx card Second display -> DVI input on gfx card I connected up the displays according to Config #2 and booted up Windows, which resulted in a mirror image on both screens. I was unable to login, as the login box was not visible. I unplugged the VGA lead from gfx card and plugged it into the external VGA port (Config #1) - Windows dual head works again, but the VGA-connected screen is not recognised by Ubuntu and remains in standby mode. Is it possible to configure a dual head setup for Ubuntu using Config #1, or am I missing something? I tried setting up dual monitors using Config #1, this morning which didn't work. By default, there is no xorg.conf file in Ubuntu 10.04.1, so I generated one using: $ sudo X :2 -configure X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-27-server i686 Ubuntu Current Operating System: Linux harrier 2.6.32-24-generic #42-Ubuntu SMP Fri Aug 20 14:24:04 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=a34c1931-98d4-4a34-880c-c227a2936c4a ro quiet splash Build Date: 21 July 2010 12:47:34PM xorg-server 2:1.7.6-2ubuntu7.3 (For technical support please see http://www.ubuntu.com/support) Current version of pixman: 0.16.4 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.2.log", Time: Mon Sep 13 10:02:02 2010 List of video drivers: apm ark intel mach64 s3virge trident mga tseng ati nouveau neomagic i740 openchrome voodoo s3 i128 radeon siliconmotion nv ztv vmware v4l chips rendition savage sisusb tdfx geode sis r128 cirrus fbdev vesa (++) Using config file: "/home/michael/xorg.conf.new" (==) Using config directory: "/usr/lib/X11/xorg.conf.d" (II) [KMS] No DRICreatePCIBusID symbol, no kernel modesetting. Xorg detected your mouse at device /dev/input/mice. Please check your config if the mouse is still not operational, as by default Xorg tries to autodetect the protocol. Xorg has configured a multihead system, please check your config. Your xorg.conf file is /home/michael/xorg.conf.new To test the server, run 'X -config /home/michael/xorg.conf.new' ddxSigGiveUp: Closing log $ sudo X -config /home/michael/xorg.conf.new Fatal server error: Server is already active for display 0 If this server is no longer running, remove /tmp/.X0-lock and start again. Please consult the The X.Org Foundation support at http://wiki.x.org for help. ddxSigGiveUp: Closing log I then booted Ubuntu in failsafe mode, dropped into root shell, and executed $ X -config /home/michael/xorg.conf.new again. The screen went blank and turned off, so

  Read the article

• How to troubleshoot a PHP script that causes a Segmenation Fault?

  - by johnlai2004

  I posted this on stackoverflow.com as well because I'm not sure if this is a programming problem or a server problem. I'm using ubuntu 9.10, apache2, mysql5 and php5. I've noticed an unusual problem with some of my php programs. Sometimes when visiting a page like profile.edit.php, the browser throws a dialogue box asking to download profile.edit.php page. When I download it, there's nothing in the file. profile.edit.php is supposed to be a web form that edits user information. I've noticed this on some of my other php pages as well. I look in my apache error logs, and I see a segmentation fault message: [Mon Mar 08 15:40:10 2010] [notice] child pid 480 exit signal Segmentation fault (11) And also, the issue may or may not appear depending on which server I deploy my application too. Additonal Details This doesn't happen all the time though. It only happens sometimes. For example, profile.edit.php will load properly. But as soon as I hit the save button (form action="profile.edit.php?save=true"), then the page asks me to download profile.edit.php. Could it be that sometimes my php scripts consume too much resources? Sample code Upon save action, my profile.edit.php includes a data_access_object.php file. I traced the code in data_access_object.php to this line here if($params[$this->primaryKey]) { $q = "UPDATE $this->tableName SET ".implode(', ', $fields)." WHERE ".$this->primaryKey." = ?$this->primaryKey"; $this->bind($this->primaryKey, $params[$this->primaryKey], $this->tblFields[$this->primaryKey]['mysqlitype']); } else { $q = "INSERT $this->tableName SET ".implode(', ', $fields); } // Code executes perfectly up to this point // echo 'print this'; exit; // if i uncomment this line, profile.edit.php will actually show 'print this'. If I leave it commented, the browser will ask me to download profile.edit.php if(!$this->execute($q)){ $this->errorSave = -3; return false;} // When I jumped into the function execute(), every line executed as expected, right up to the return statement. And if it helps, here's the function execute($sql) in data_access_object.php function execute($sql) { // find all list types and explode them // eg. turn ?listId into ?listId0,?listId1,?listId2 $arrListParam = array_bubble_up('arrayName', $this->arrBind); foreach($arrListParam as $listName) if($listName) { $explodeParam = array(); $arrList = $this->arrBind[$listName]['value']; foreach($arrList as $key=>$val) { $newParamName = $listName.$key; $this->bind($newParamName,$val,$this->arrBind[$listName]['type']); $explodeParam[] = '?'.$newParamName; } $sql = str_replace("?$listName", implode(',',$explodeParam), $sql); } // replace all ?varName with ? for syntax compliance $sqlParsed = preg_replace('/\?[\w\d_\.]+/', '?', $sql); $this->stmt->prepare($sqlParsed); // grab all the parameters from the sql to create bind conditions preg_match_all('/\?[\w\d_\.]+/', $sql, $matches); $matches = $matches[0]; // store bind conditions $types = ''; $params = array(); foreach($matches as $paramName) { $types .= $this->arrBind[str_replace('?', '', $paramName)]['type']; $params[] = $this->arrBind[str_replace('?', '', $paramName)]['value']; } $input = array('types'=>$types) + $params; // bind it if(!empty($types)) call_user_func_array(array($this->stmt, 'bind_param'), $input); $stat = $this->stmt->execute(); if($GLOBALS['DEBUG_SQL']) echo '<p style="font-weight:bold;">SQL error after execution:</p> ' . $this->stmt->error.'<p>&nbsp;</p>'; $this->arrBind = array(); return $stat; }

  Read the article

• All PHP sites stopped working on IIS7, internal server error 500

  - by TimothyP

  I installed multiple drupal 7 sites using the Web Platform Installer on Windows Server 2008. Until know they worked without any problems, but recently internal server error 500 started to show up (once every so many requests), now it happens for all requests to any of the php sites. There's not much detail to go on, and nothing changed between the time when it was working and now (well nothing I know of anyway) The log file is flooded with messages such as [09-Aug-2011 09:08:04] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:20] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:22] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:51] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:56] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:57] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:12:13] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 I have tried increasing the memory limit in php.ini as such: memory_limit = 512MB But that doesn't seem to solve the problem either. This is in the global php configuration in IIS When I looked at the sites one by one, I noticed that PHP seemed to have been disabled. PHP is not enabled. Register new PHP version to enable PHP via FastCGI So I tried to register the php version again C:\Program Files\PHP\v5.3\php-cgi.exe But when I try to apply the changes I get There was an error while performing this operation Details: Operation is not valid due to the current state of the object There doesn't seem to be any other information than that. I have no idea why all of a sudden php isn't available for the sites anymore. PS: I have rebooted IIS, the server, etc... This server is hosted on amazon S3, so I gave the server some more power Update These seem to be two different issues I used memory_limit=128MB instead of memory_limit=128M Notice the "M" instead of "MB" A memory_limit of 128M was not enough, had to increase it to 512M The first issue caused internal server errors for every request. Increasing to 512MB seemed to have solved the problem for a little while, but after a while the server errors return. Note that the PHP manager inside of IIS still shows there is no PHP available for the sites (the global config does see it as available) So the problem remains unsolved

  Read the article

• Severe mysqldump performance degradation using Centos Linux, 8GB PAE and MySQL 5.0.77

  - by Duncan Harris

  We use MySQL 5.0.77 on CentOS 5.5 on VMWare: Linux dev.ic.soschildrensvillages.org.uk 2.6.18-194.11.4.el5PAE #1 SMP Tue Sep 21 05:48:23 EDT 2010 i686 i686 i386 GNU/Linux We have recently upgraded from 4GB RAM to 8GB. When we did this the time of our mysqldump overnight backup jumped from under 10 minutes to over 2 hours. It also caused unresponsiveness on our plone based web site due to database load. The dump is using the optimized mysqldump format and is spooled directly through a socket to another server. Any ideas on what we could do to fix gratefully appreciated. Would a MySQL upgrade help? Anything we can do to MySQL config? Anything we can do to Linux config? Or do we have to add another server or go to 64-bit? We ran a previous (non-virtual) server on 6GB PAE and didn't notice a similar issue. This was on same MySQL version, but Centos 4.4. Server config file: [mysqld] port=3307 socket=/tmp/mysql_live.sock wait_timeout=31536000 interactive_timeout=31536000 datadir=/var/mysql/live/data user=mysql max_connections = 200 max_allowed_packet = 64M table_cache = 2048 binlog_cache_size = 128K max_heap_table_size = 32M sort_buffer_size = 2M join_buffer_size = 2M lower_case_table_names = 1 innodb_data_file_path = ibdata1:10M:autoextend innodb_buffer_pool_size=1G innodb_log_file_size=300M innodb_log_buffer_size=8M innodb_flush_log_at_trx_commit=1 innodb_file_per_table [mysqldump] # Do not buffer the whole result set in memory before writing it to # file. Required for dumping very large tables quick max_allowed_packet = 64M [mysqld_safe] # Increase the amount of open files allowed per process. Warning: Make # sure you have set the global system limit high enough! The high value # is required for a large number of opened tables open-files-limit = 8192 Server variables: mysql> show variables; +---------------------------------+------------------------------------------------------------------+ | Variable_name | Value | +---------------------------------+------------------------------------------------------------------+ | auto_increment_increment | 1 | | auto_increment_offset | 1 | | automatic_sp_privileges | ON | | back_log | 50 | | basedir | /usr/local/mysql-5.0.77-linux-i686-glibc23/ | | binlog_cache_size | 131072 | | bulk_insert_buffer_size | 8388608 | | character_set_client | latin1 | | character_set_connection | latin1 | | character_set_database | latin1 | | character_set_filesystem | binary | | character_set_results | latin1 | | character_set_server | latin1 | | character_set_system | utf8 | | character_sets_dir | /usr/local/mysql-5.0.77-linux-i686-glibc23/share/mysql/charsets/ | | collation_connection | latin1_swedish_ci | | collation_database | latin1_swedish_ci | | collation_server | latin1_swedish_ci | | completion_type | 0 | | concurrent_insert | 1 | | connect_timeout | 10 | | datadir | /var/mysql/live/data/ | | date_format | %Y-%m-%d | | datetime_format | %Y-%m-%d %H:%i:%s | | default_week_format | 0 | | delay_key_write | ON | | delayed_insert_limit | 100 | | delayed_insert_timeout | 300 | | delayed_queue_size | 1000 | | div_precision_increment | 4 | | keep_files_on_create | OFF | | engine_condition_pushdown | OFF | | expire_logs_days | 0 | | flush | OFF | | flush_time | 0 | | ft_boolean_syntax | + -><()~*:""&| | | ft_max_word_len | 84 | | ft_min_word_len | 4 | | ft_query_expansion_limit | 20 | | ft_stopword_file | (built-in) | | group_concat_max_len | 1024 | | have_archive | YES | | have_bdb | NO | | have_blackhole_engine | YES | | have_compress | YES | | have_crypt | YES | | have_csv | YES | | have_dynamic_loading | YES | | have_example_engine | NO | | have_federated_engine | YES | | have_geometry | YES | | have_innodb | YES | | have_isam | NO | | have_merge_engine | YES | | have_ndbcluster | DISABLED | | have_openssl | DISABLED | | have_ssl | DISABLED | | have_query_cache | YES | | have_raid | NO | | have_rtree_keys | YES | | have_symlink | YES | | hostname | app.ic.soschildrensvillages.org.uk | | init_connect | | | init_file | | | init_slave | | | innodb_additional_mem_pool_size | 1048576 | | innodb_autoextend_increment | 8 | | innodb_buffer_pool_awe_mem_mb | 0 | | innodb_buffer_pool_size | 1073741824 | | innodb_checksums | ON | | innodb_commit_concurrency | 0 | | innodb_concurrency_tickets | 500 | | innodb_data_file_path | ibdata1:10M:autoextend | | innodb_data_home_dir | | | innodb_adaptive_hash_index | ON | | innodb_doublewrite | ON | | innodb_fast_shutdown | 1 | | innodb_file_io_threads | 4 | | innodb_file_per_table | ON | | innodb_flush_log_at_trx_commit | 1 | | innodb_flush_method | | | innodb_force_recovery | 0 | | innodb_lock_wait_timeout | 50 | | innodb_locks_unsafe_for_binlog | OFF | | innodb_log_arch_dir | | | innodb_log_archive | OFF | | innodb_log_buffer_size | 8388608 | | innodb_log_file_size | 314572800 | | innodb_log_files_in_group | 2 | | innodb_log_group_home_dir | ./ | | innodb_max_dirty_pages_pct | 90 | | innodb_max_purge_lag | 0 | | innodb_mirrored_log_groups | 1 | | innodb_open_files | 300 | | innodb_rollback_on_timeout | OFF | | innodb_support_xa | ON | | innodb_sync_spin_loops | 20 | | innodb_table_locks | ON | | innodb_thread_concurrency | 8 | | innodb_thread_sleep_delay | 10000 | | interactive_timeout | 31536000 | | join_buffer_size | 2097152 | | key_buffer_size | 8384512 | | key_cache_age_threshold | 300 | | key_cache_block_size | 1024 | | key_cache_division_limit | 100 | | language | /usr/local/mysql-5.0.77-linux-i686-glibc23/share/mysql/english/ | | large_files_support | ON | | large_page_size | 0 | | large_pages | OFF | | lc_time_names | en_US | | license | GPL | | local_infile | ON | | locked_in_memory | OFF | | log | OFF | | log_bin | OFF | | log_bin_trust_function_creators | OFF | | log_error | | | log_queries_not_using_indexes | OFF | | log_slave_updates | OFF | | log_slow_queries | OFF | | log_warnings | 1 | | long_query_time | 10 | | low_priority_updates | OFF | | lower_case_file_system | OFF | | lower_case_table_names | 1 | | max_allowed_packet | 67108864 | | max_binlog_cache_size | 4294963200 | | max_binlog_size | 1073741824 | | max_connect_errors | 10 | | max_connections | 200 | | max_delayed_threads | 20 | | max_error_count | 64 | | max_heap_table_size | 33554432 | | max_insert_delayed_threads | 20 | | max_join_size | 18446744073709551615 | | max_length_for_sort_data | 1024 | | max_prepared_stmt_count | 16382 | | max_relay_log_size | 0 | | max_seeks_for_key | 4294967295 | | max_sort_length | 1024 | | max_sp_recursion_depth | 0 | | max_tmp_tables | 32 | | max_user_connections | 0 | | max_write_lock_count | 4294967295 | | multi_range_count | 256 | | myisam_data_pointer_size | 6 | | myisam_max_sort_file_size | 2146435072 | | myisam_recover_options | OFF | | myisam_repair_threads | 1 | | myisam_sort_buffer_size | 8388608 | | myisam_stats_method | nulls_unequal | | ndb_autoincrement_prefetch_sz | 1 | | ndb_force_send | ON | | ndb_use_exact_count | ON | | ndb_use_transactions | ON | | ndb_cache_check_time | 0 | | ndb_connectstring | | | net_buffer_length | 16384 | | net_read_timeout | 30 | | net_retry_count | 10 | | net_write_timeout | 60 | | new | OFF | | old_passwords | OFF | | open_files_limit | 8192 | | optimizer_prune_level | 1 | | optimizer_search_depth | 62 | | pid_file | /var/mysql/live/mysqld.pid | | plugin_dir | | | port | 3307 | | preload_buffer_size | 32768 | | profiling | OFF | | profiling_history_size | 15 | | protocol_version | 10 | | query_alloc_block_size | 8192 | | query_cache_limit | 1048576 | | query_cache_min_res_unit | 4096 | | query_cache_size | 0 | | query_cache_type | ON | | query_cache_wlock_invalidate | OFF | | query_prealloc_size | 8192 | | range_alloc_block_size | 4096 | | read_buffer_size | 131072 | | read_only | OFF | | read_rnd_buffer_size | 262144 | | relay_log | | | relay_log_index | | | relay_log_info_file | relay-log.info | | relay_log_purge | ON | | relay_log_space_limit | 0 | | rpl_recovery_rank | 0 | | secure_auth | OFF | | secure_file_priv | | | server_id | 0 | | skip_external_locking | ON | | skip_networking | OFF | | skip_show_database | OFF | | slave_compressed_protocol | OFF | | slave_load_tmpdir | /tmp/ | | slave_net_timeout | 3600 | | slave_skip_errors | OFF | | slave_transaction_retries | 10 | | slow_launch_time | 2 | | socket | /tmp/mysql_live.sock | | sort_buffer_size | 2097152 | | sql_big_selects | ON | | sql_mode | | | sql_notes | ON | | sql_warnings | OFF | | ssl_ca | | | ssl_capath | | | ssl_cert | | | ssl_cipher | | | ssl_key | | | storage_engine | MyISAM | | sync_binlog | 0 | | sync_frm | ON | | system_time_zone | GMT | | table_cache | 2048 | | table_lock_wait_timeout | 50 | | table_type | MyISAM | | thread_cache_size | 0 | | thread_stack | 196608 | | time_format | %H:%i:%s | | time_zone | SYSTEM | | timed_mutexes | OFF | | tmp_table_size | 33554432 | | tmpdir | /tmp/ | | transaction_alloc_block_size | 8192 | | transaction_prealloc_size | 4096 | | tx_isolation | REPEATABLE-READ | | updatable_views_with_limit | YES | | version | 5.0.77 | | version_comment | MySQL Community Server (GPL) | | version_compile_machine | i686 | | version_compile_os | pc-linux-gnu | | wait_timeout | 31536000 | +---------------------------------+------------------------------------------------------------------+ 237 rows in set (0.00 sec)

  Read the article

• DKIMPROXY signing wrong domain

  - by user64566

  Just.... wont sign a thing... The dkimproxy_out.conf: # specify what address/port DKIMproxy should listen on listen 127.0.0.1:10028 # specify what address/port DKIMproxy forwards mail to relay 127.0.0.1:10029 # specify what domains DKIMproxy can sign for (comma-separated, no spaces) domain tinymagnet.com,hypnoenterprises.com # specify what signatures to add signature dkim(c=relaxed) signature domainkeys(c=nofws) # specify location of the private key keyfile /etc/postfix/dkim/private.key # specify the selector (i.e. the name of the key record put in DNS) selector mail The direct connection straight to the server, making it clear that this is a problem with dkimproxy and not postfix... mmxbass@hypno1:~$ telnet localhost 10028 Trying 127.0.0.1... Connected to localhost.localdomain. Escape character is '^]'. 220 hypno1.hypnoenterprises.com ESMTP Postfix (Debian/GNU) EHLO hypno1.hypnoenterprises.com 250-hypno1.hypnoenterprises.com 250-PIPELINING 250-SIZE 250-ETRN 250-STARTTLS 250-AUTH PLAIN LOGIN 250-AUTH=PLAIN LOGIN 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN MAIL FROM:<[email protected]> 250 2.1.0 Ok RCPT TO:<[email protected]> 250 2.1.5 Ok DATA 354 End data with <CR><LF>.<CR><LF> SUBJECT:test . 250 2.0.0 Ok: queued as B62A78D94F QUIT 221 2.0.0 Bye Now lets look at the mail headers as reported by myiptest.com: From [email protected] Thu Dec 23 18:57:14 2010 Return-path: Envelope-to: [email protected] Delivery-date: Thu, 23 Dec 2010 18:57:14 +0000 Received: from [184.82.95.154] (helo=hypno1.hypnoenterprises.com) by myiptest.com with esmtp (Exim 4.69) (envelope-from ) id 1PVqLi-0004YR-5f for [email protected]; Thu, 23 Dec 2010 18:57:14 +0000 Received: from hypno1.hypnoenterprises.com (localhost.localdomain [127.0.0.1]) by hypno1.hypnoenterprises.com (Postfix) with ESMTP id 878418D902 for ; Thu, 23 Dec 2010 13:57:26 -0500 (EST) DKIM-Signature: v=1; a=rsa-sha1; c=simple; d=hypnoenterprises.com; h= from:to:subject:date:mime-version:content-type :content-transfer-encoding:message-id; s=mail; bh=uoq1oCgLlTqpdD X/iUbLy7J1Wic=; b=HxBKTGjzTpZSZU8xkICtARCKxqriqZK+qHkY1U8qQlOw+S S1wlZxzTeDGIOgeiTviGDpcKWkLLTMlUvx8dY4FuT8K1/raO9nMC7xjG2uLayPX0 zLzm4Srs44jlfRQIjrQd9tNnp35Wkry6dHPv1u21WUvnDWaKARzGGHRLfAzW4= Received: from localhost (localhost.localdomain [127.0.0.1]) by hypno1.hypnoenterprises.com (Postfix) with ESMTP id 2A04A8D945 for ; Thu, 23 Dec 2010 13:57:26 -0500 (EST) X-Virus-Scanned: Debian amavisd-new at hypno1.hypnoenterprises.com Received: from hypno1.hypnoenterprises.com ([127.0.0.1]) by localhost (hypno1.hypnoenterprises.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id Ua7BnnzmIaUO for ; Thu, 23 Dec 2010 13:57:25 -0500 (EST) Received: from phoenix.localnet (c-76-23-245-211.hsd1.ma.comcast.net [76.23.245.211]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (No client certificate requested) by hypno1.hypnoenterprises.com (Postfix) with ESMTPSA id 48A0D8D90D for ; Thu, 23 Dec 2010 13:57:25 -0500 (EST) From: Joshua Pech To: [email protected] Subject: test Date: Thu, 23 Dec 2010 13:57:25 -0500 User-Agent: KMail/1.13.5 (Linux/2.6.32-5-amd64; KDE/4.4.5; x86_64; ; ) MIME-Version: 1.0 Content-Type: Text/Plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Message-Id: DomainKey-Status: no signature Received-SPF: pass (myiptest.com: domain of tinymagnet.com designates 184.82.95.154 as permitted sender) Notice how the dkim signature specifies the d=hypnoenterprises.com.... why?

  Read the article

• Rails app deployment challenge, not finding database table in production.log

  - by Stefan M

  I'm trying to setup PasswordPusher as my first ruby app ever. Building and running the webrick server as instructed in README works fine. It was only when I tried to add Apache ProxyPass and ProxyPassReverse that the page load slowed down to several minutes. So I gave mod_passenger a whirl but now it's unable to find the password table. Here's what I get in log/production.log. Started GET "/" for 10.10.2.13 at Sun Jun 10 08:07:19 +0200 2012 Processing by PasswordsController#new as HTML Completed 500 Internal Server Error in 1ms ActiveRecord::StatementInvalid (Could not find table 'passwords'): app/controllers/passwords_controller.rb:77:in `new' app/controllers/passwords_controller.rb:77:in `new' While in log/private.log I get a lot more output so here's just a snippet but it looks to me like it's working with the database. Edit: This was actually old log output, maybe from db:create. Migrating to AddUserToPassword (20120220172426) (0.3ms) ALTER TABLE "passwords" ADD "user_id" integer (0.0ms) PRAGMA index_list("passwords") (0.2ms) CREATE INDEX "index_passwords_on_user_id" ON "passwords" ("user_id") (0.7ms) INSERT INTO "schema_migrations" ("version") VALUES ('20120220172426') (0.1ms) select sqlite_version(*) (0.1ms) SELECT "schema_migrations"."version" FROM "schema_migrations" (0.0ms) PRAGMA index_list("passwords") (0.0ms) PRAGMA index_info('index_passwords_on_user_id') (4.6ms) PRAGMA index_list("rails_admin_histories") (0.0ms) PRAGMA index_info('index_rails_admin_histories') (0.0ms) PRAGMA index_list("users") (4.8ms) PRAGMA index_info('index_users_on_unlock_token') (0.0ms) PRAGMA index_info('index_users_on_reset_password_token') (0.0ms) PRAGMA index_info('index_users_on_email') (0.0ms) PRAGMA index_list("views") In my vhost I have it set to use RailsEnv private. <VirtualHost *:80> # ProxyPreserveHost on # # ProxyPass / http://10.220.100.209:180/ # ProxyPassReverse / http://10.220.100.209:180/ DocumentRoot /var/www/pwpusher/public <Directory /var/www/pwpusher/public> allow from all Options -MultiViews </Directory> RailsEnv private ServerName pwpush.intranet ErrorLog /var/log/apache2/error.log LogLevel debug CustomLog /var/log/apache2/access.log combined </VirtualHost> My passenger.conf in mods-enabled is default for Debian. <IfModule mod_passenger.c> PassengerRoot /usr PassengerRuby /usr/bin/ruby </IfModule> In the apache error.log I get something more cryptic to me. [Sun Jun 10 06:25:07 2012] [notice] Apache/2.2.16 (Debian) Phusion_Passenger/2.2.11 PHP/5.3.3-7+squeeze9 with Suhosin-Patch mod_ssl/2.2.16 OpenSSL/0.9.8o configured -- resuming normal operations /var/www/pwpusher/vendor/bundle/ruby/1.8/bundler/gems/modernizr-rails-09e9e6a92d67/lib/modernizr/rails/version.rb:3: warning: already initialized constant VERSION cache: [GET /] miss [Sun Jun 10 08:07:19 2012] [debug] mod_deflate.c(615): [client 10.10.2.13] Zlib: Compressed 728 to 423 : URL / /var/www/pwpusher/vendor/bundle/ruby/1.8/bundler/gems/modernizr-rails-09e9e6a92d67/lib/modernizr/rails/version.rb:3: warning: already initialized constant VERSION cache: [GET /] miss [Sun Jun 10 10:17:16 2012] [debug] mod_deflate.c(615): [client 10.10.2.13] Zlib: Compressed 728 to 423 : URL / Maybe that's routine stuff. I can see the rake command create files in the relative app root db/. I have private.sqlite3, production.sqlite3 among others. And here's my config/database.yml. base: &base adapter: sqlite3 timeout: 5000 development: database: db/development.sqlite3 <<: *base test: database: db/test.sqlite3 <<: *base private: database: db/private.sqlite3 <<: *base production: database: db/production.sqlite3 <<: *base I've tried setting absolute paths in it but that did not help.

  Read the article

• nginx serving php for download (previously: nginx multiple location alias 404)

  - by torsten

  Im having issues with the alias location in the following configuration server { listen 80; server_name localhost; root /srv/http/share; index index.php; include php.conf; location / { try_files $uri $uri/ /index.php$is_args$args; } location /phpmemcachedadmin { alias /srv/http/phpmemcachedadmin; } location /webgrind { alias /srv/http/webgrind; } } while / works well, im getting a 404 for /webgrind and /phpmemcachedadmin. If i switch the root directory to /srv/http and alias the / location, die /phpmemcachedadmin and webgrind work, but not the / location. UPDATE: I managed the probems getting all location to work, so here is the updated config #user html; worker_processes 2; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; gzip on; server { listen 80; server_name localhost; location / { root /srv/http/share; index index.php; try_files $uri $uri/ /index.php$is_args$args; include php.conf; } location /phpmemcachedadmin { root /srv/http; index index.php; try_files $uri $uri/ /index.php$is_args$args; include php.conf; } location /webgrind { root /srv/http; index index.php; try_files $uri $uri/ /index.php$is_args$args; include php.conf; } } } The php.conf looks like this: location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/run/php-fpm/php-fpm.sock; fastcgi_index index.php; include fastcgi.conf; } while the fastcgi.conf like this: fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param HTTPS $https if_not_empty; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; # PHP only, required if PHP was built with --enable-force-cgi-redirect fastcgi_param REDIRECT_STATUS 200; But there is a problem serving phpmemcachedadmin. If i call localhost/phpmemcachedadmin/index.php it works quite well (i get a log that i got served the file in access log). On the other hand, if i just call localhost/phpmemcachedadmin/ he serves me the file for download. Neither the error.log nor the access.log log anything when i get served the the file for download. Any ideas?

  Read the article

• Putting indexes in separate filegroup kills our queries

  - by womp

  Can anyone shed some light on this? On our dev boxes, our database resides entirely in the PRIMARY filegroup, and everything works fine. On one of our production servers, recently upgraded from 2005 to 2008, we noticed it was performing slower than it should. On this machine, there are two filegroups - PRIMARY and INDEXES. Both filegroups contain 1 file per logical volume, one logical volume per CPU, (and each logical volume is a RAID 10 of 4 physical disks). We isolated a few queries that were performing fast on the dev boxes and slow (up to 40x slower) on the production machine. Turned out these queries were using the non-clustered indexes that resided in the INDEXES filegroup. Tweaking some of the queries to only use clustered indexes that were in the PRIMARY filegroup dropped their times back to normal. As a final confirmation, we redeployed the same database on the same machine to have everything in PRIMARY, and things went back to normal! Here's the statistics output of one of the queries, run identically on the machine with different filegroup configurations (table names changed to protect the innocent): FAST (everything in PRIMARY filegroup): (3 row(s) affected) Table '0'. Scan count 2, logical reads 14, ... Table '1'. Scan count 0, logical reads 0, ... Table '1'. Scan count 0, logical reads 0, ... Table '2'. Scan count 2, logical reads 7, ... Table '3'. Scan count 2, logical reads 1012, ... Table '4'. Scan count 1, logical reads 3, ... SQL Server Execution Times: CPU time = 437 ms, elapsed time = 445 ms. SLOW (indexes split into their own filegroup): (3 row(s) affected) Table '0'. Scan count 209, logical reads 428, ... Table '1'. Scan count 0, logical reads 0,... Table '2'. Scan count 1021, logical reads 9043,.... Table '3'. Scan count 209, logical reads 105754, .... Table '4'. Scan count 0, logical reads 0, .... Table '5'. Scan count 1, logical reads 695, ... **Table '#46DA8CA9'. Scan count 205, logical reads 205, ...** Table '6'. Scan count 6, logical reads 436, ... Table '7'. Scan count 1, logical reads 12,.... SQL Server Execution Times: CPU time = 17581 ms, elapsed time = 17595 ms. Notice the weird temp table and extra tables involved in the slow query. It seems clear that having a second file group is making SQL Server batty with choosing an execution plan. What the heck is going on?

  Read the article

• Email forwarding from my domain to gmail - FAIL

  - by pitosalas

  [There are numerous similar questions on ServerFault but I couldn't find one that was exactly on point] Background: I use Gmail for my email client. My email is [email protected]. However the email that people communicate to me with is [email protected]. I run the server that hosts www.example.com and other domains, at ServerBeach. Up to yesterday, I had SENDMAIL painlessly just forward emails to [email protected] to [email protected] and everything was fine, for several years in fact. Suddenly my email stopped working - that is, my gmail account stopped receiving emails via the forward from my server. Looking into it I found a bunch of emails sitting on my server with content like this: ... while talking to gmail-smtp-in.l.google.com.: RCPT To: <<< 450-4.2.1 The user you are trying to contact is receiving mail at a rate that <<< 450-4.2.1 prevents additional messages from being delivered. Please resend your <<< 450-4.2.1 message at a later time. If the user is able to receive mail at that <<< 450-4.2.1 time, your message will be delivered. For more information, please <<< 450 4.2.1 visit xxxxxx://mail.google.com/support/bin/answer.py?answer=6592 u15si37138086qco.76 [email protected]... Deferred: 450-4.2.1 The user you are trying to contact is receiving mail at a rate that DATA <<< 550-5.7.1 [64.34.168.137 1] Our system has detected an unusual rate of <<< 550-5.7.1 unsolicited mail originating from your IP address. To protect our <<< 550-5.7.1 users from spam, mail sent from your IP address has been blocked. <<< 550-5.7.1 Please visit xxxxx://www.google.com/mail/help/bulk_mail.html to review <<< 550 5.7.1 our Bulk Email Senders Guidelines. u15si37138086qco.76 554 5.0.0 Service unavailable ... while talking to alt1.gmail-smtp-in.l.google.com.: From what I've been researching, I think somehow someone has/is hijacking my domain name or something and this somehow has caused gmail's servers to notice and cut me off. But I don't know really what's going on nor do I see whatever emails might be involved. I've read stuff on zoneedit.com that sounds like they might have a solution in their service for what I am trying to do. I also read a lot about admining DNS and SENDMAIL and tried various things, but nothing works. Can you tell from my description what is going on that caused GMail's server to stop accepting email from my server and is there a way to stop it? What is the 'correct' way to configure things so that emails to [email protected] behave as if they were sent to [email protected]? Thanks so much!

  Read the article

• Postfix not sending/allowing receiving of messages after server (hardware) changed

  - by 537mfb

  We had na old notebook runing Ubuntu 12.04 working as a web/ftp/mail server and it worked but since the notebook was a notebook and pretty old and unreliable, a desktop was bought to replace it before it stopped working all together. Due to issues with the new desktop's vídeo card, we couldn't use Ubuntu 12.04 so we installed Ubuntu 13.10 and wen't about configuring it. Since we removed the notebook from the network, we kept the same Computer Name and local IP address to make things as close to the old server as possible configuration-wise. However, something has gone wrong since Postfix is throwing error 451 4.3.0 lookup faillure on every attempt to send a mail, and no email can be received either. Our main.cf file is a copy of the one we were using (and working) on the old server (notice we use EHCP) # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name powered by Easy Hosting Control Panel (ehcp) on Ubuntu, www.ehcp.net biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no myhostname = m21-traducoes.com.pt relayhost = mydestination = localhost, 89.152.248.139 mynetworks = 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0/16, 10.0.0.0/8, 89.152.248.0/24 virtual_alias_domains = virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual_forwardings.cf, proxy:mysql:/etc/postfix/mysql-virtual_email2email.cf transport_maps = proxy:mysql:/etc/postfix/mysql-virtual_transports.cf virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql-virtual_domains.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailboxes.cf virtual_mailbox_base = /home/vmail virtual_uid_maps = static:5000 virtual_gid_maps = static:5000 smtpd_sasl_auth_enable = yes smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_recipient_restrictions = permit_mynetworks,permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtp_use_tls = yes smtpd_use_tls = yes smtpd_tls_auth_only = no smtpd_tls_CAfile = /etc/postfix/cacert.pem smtpd_tls_cert_file = /etc/postfix/smtpd.cert smtpd_tls_key_file = /etc/postfix/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_session_cache_timeout = 3600s tls_random_source = dev:/dev/urandom virtual_create_maildirsize = yes virtual_mailbox_extended = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql-virtual_mailbox_limit_maps.cf virtual_mailbox_limit_override = yes virtual_maildir_limit_message = "The user you are trying to reach is over quota." virtual_overquota_bounce = yes debug_peer_list = sender_canonical_maps = debug_peer_level = 1 proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $mynetworks $virtual_mailbox_limit_maps $transport_maps alias_maps = hash:/etc/aliases smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated,check_client_access hash:/var/lib/pop-before-smtp/hosts,reject_unauth_destination smtpd_destination_concurrency_limit = 2 smtpd_destination_rate_delay = 1s smtpd_extra_recipient_limit = 10 disable_vrfy_command = yes smtpd_delay_reject = yes smtpd_helo_required = yes smtpd_error_sleep_time = 1s smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 This configuration was working before but now everytime i try to send a mail in squirrelmail it reports: Message not sent. Server replied: Requested action aborted: error in processing 451 4.3.0 <[email protected]>: Temporary lookup failure And i can't send mail to it from outsider either. Any ideas? EDIT: Here are some issues MXToolBox reports to my domain, answering hopefully to @Teun Vink: BlackList Mail Server Web Server DNS Error 4 0 2 0 Warnings 0 0 0 3 Passed 0 6 3 12 So the domain is on some blacklist, but that doesn't explain the error at all No mail server issues found (except it's not working) Those two web server errors it's because i don't have HTTPS workin (No SSL Certificate) so the test fails Those 3 DNS warnings we're already there when it was working with the other machine and are related to stuff i can't control: SOA Refresh Value is outside of the recommended range SOA Expire Value out of recommended range SOA NXDOMAIN Value too high I've searched and as far as i can tell only the guys who sold the retail can change those values and they won't. Edit2: I half solved the issue.on the new machine postfix was installed but postfix-mysql waasn't so he couldn't connect to the database (rookie mistake). After fixing that, i can now send mails to the outsider without any issues, however i am still not able to receive mails from utside. The sender doesn't get any message warning about the non-delivery but the message doesn't fall in the inbox and the log shows: Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: NOQUEUE: reject: RCPT from re lay4.ptmail.sapo.pt[212.55.154.24]: 451 4.3.5 <relay4.ptmail.sapo.pt[212.55.154. 24]>: Client host rejected: Server configuration error; from=<[email protected]> to=<[email protected]> proto=SMTP helo=<sapo.pt> Nov 13 15:11:57 m21-traducoes postfix/smtpd[5872]: disconnect from relay4.ptmail .sapo.pt[212.55.154.24]

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by user135501

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

  Read the article

• How to diagnose computer lockups and freezes?

  - by Scott Mitchell

  I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

  Read the article

• phpMyAdmin setup issues

  - by EquinoX

  I am trying to follow the tutorial here to setup the user and pass. It says there that "this section is only applicable if your MySQL server is running with --skip-show-database". First question is, how do I check if MySQl server is running with --skip-show-database? Is there any way I can access phpMyAdmin SQL query window without logging in? Otherwise I'd have to execute this SQL from command line. I am also getting this: Cannot load mcrypt extension. Please check your PHP configuration. I have added mcrypt.so to php.ini and doing the following command proves that I have it. [root@DT html]# rpm -qa | grep mcrypt mcrypt-2.6.8-1.el5 php-mcrypt-5.3.5-1.1.w5 libmcrypt-2.5.8-4.el5.centos [root@DT html]# php -v PHP 5.3.5 (cli) (built: Feb 19 2011 13:10:09) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies Now when I go to phpinfo() and search for mcrypt it can find it inside the Configure Command row ('--with-mcrypt=shared,/usr'). So, what to do next?. UPDATE: I didn't put extension=mcrypt.so in php.ini as it will complain the following: PHP Warning: Module 'mcrypt' already loaded in Unknown on line 0 Here's my nginx.conf: #user nobody; worker_processes 2; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; gzip on; server { listen 80; root /usr/share/nginx/html; server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; location / { #root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { #root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # location ~ \.php$ { #root /usr/local/nginx/html; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME /usr/share/nginx/html$fastcgi_script _name; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one location ~ /\.ht { deny all; } } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv2:+EXP; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} }

  Read the article

• Installing .NET application on IIS 7.5 issues

  - by Juw

  Really need some help here. I am at a loss. I am trying to install a webservice that some other guy wrote in .NET. I have some basic IIS understanding. The webservice works just fine on my dev computer. But now i try to move the webservice to a production server and bad things happens. The webservice has been located in C:\inetpub\wwwroot\ dir on the dev server. But on this production server it is to be located in D:\services\ I have managed to install an application on the production server and everything seems fine and dandy. But when i "Test Settings" in the initial setup i get "Invalid application path" error. But i can just close it down and still install it. But when i try to access the webservice with: http://myserver.com/webservice/GetData nothing happens. Just a blank page and when i check the response headers...500 error. I don´t know what is going on here or where the problem is. I post the config file here so someone hopefully might notice something odd. Thanx in advance! EDIT: The config file is from my dev server. I just copied it to my production server...but that obviously didn´t work :-) UPDATE: I noticed that my dev server run in an Application pool with Net 4 and in "classic" "mode". On the production server it was in NET 4 but in "integrated" mode. So i changed it to "classic". I still get a blank page. But checking the log will output this: 2012-10-03 14:57:00 ip removed GET /boo/GetData - 80 - ip removed Mozilla/5.0+(Windows+NT+6.1;+WOW64;+rv:15.0)+Gecko/20100101+Firefox/15.0.1 404 2 1260 203 <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.web> <identity impersonate="true" /> <!-- Impersonate NT AUTHORITY/IUSR --> <compilation targetFramework="4.0"> <assemblies> <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b7735c561131e089" /> </assemblies> </compilation> <pages controlRenderingCompatibilityVersion="3.5" clientIDMode="AutoID" /> </system.web> <system.webServer> <modules runAllManagedModulesForAllRequests="true" /> <httpErrors existingResponse="PassThrough" /> <httpProtocol> <customHeaders> <add name="Access-Control-Allow-Origin" value="*" /> </customHeaders> </httpProtocol> <directoryBrowse enabled="false" /> </system.webServer> <system.serviceModel> <serviceHostingEnvironment aspNetCompatibilityEnabled="true" /> <standardEndpoints> <webHttpEndpoint> <!-- Configure the WCF REST service base address via the global.asax.cs file and the default endpoint via the attributes on the <standardEndpoint> element below --> <standardEndpoint name="" helpEnabled="true" automaticFormatSelectionEnabled="true" /> </webHttpEndpoint> </standardEndpoints> </system.serviceModel> <connectionStrings> <add name="Entities" connectionString="metadata=res://*/DataModel.csdl|res://*/DataModel.ssdl|res://*/DataModel.msl;provider=System.Data.SqlClient;provider connection string=&quot;data source=someip;initial catalog=db_90;User ID=user1;Password=access2;multipleactiveresultsets=True;App=EntityFramework&quot;" providerName="System.Data.EntityClient" /> </connectionStrings> </configuration>

  Read the article

• Setting environment variables in OS X

  - by Percival Ulysses

  Despite the warning that questions that can be answered are preferred, this question is more a request for comments. I apologize for this, but I feel that it is valuable nonetheless. The problem to set up environment variables such that they are available for GUI applications has been around since the dawn of Mac OS X. The solution with ~/.MacOSX/environment.plist never satisfied me because it was not reliable, and bash style globbing wasn't available. Another solution is the use of Login Hooks with a suitable shell script, but these are deprecated. The Apple approved way for such functionality as provided by login hooks is the use of Launch Agents. I provided a launch agent that is located in /Library/LaunchAgents/: <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>Label</key> <string>user.conf.launchd</string> <key>Program</key> <string>/Users/Shared/conflaunchd.sh</string> <key>ProgramArguments</key> <array> <string>~/.conf.launchd</string> </array> <key>EnableGlobbing</key> <true/> <key>RunAtLoad</key> <true/> <key>LimitLoadToSessionType</key> <array> <string>Aqua</string> <string>StandardIO</string> </array> </dict> </plist> The real work is done in the shell script /Users/Shared/conflaunchd.sh, which reads ~/.conf.launchd and feeds it to launchctl: #! /bin/bash #filename="$1" filename="$HOME/.conf.launchd" if [ ! -r "$filename" ]; then exit fi eval $(/usr/libexec/path_helper -s) while read line; do # skip lines that only contain whitespace or a comment if [ ! -n "$line" -o `expr "$line" : '#'` -gt 0 ]; then continue; fi eval launchctl $line done <"$filename" exit 0 Notice the call of path_helper to get PATH set up right. Finally, ~/.conf.launchd looks like that setenv PATH ~/Applications:"${PATH}" setenv TEXINPUTS .:~/Documents/texmf//: setenv BIBINPUTS .:~/Documents/texmf/bibtex//: setenv BSTINPUTS .:~/Documents/texmf/bibtex//: # Locale setenv LANG en_US.UTF-8 These are launchctl commands, see its manpage for further information. Works fine for me (I should mention that I'm still a Snow Leopard guy), GUI applications such as texstudio can see my local texmf tree. Things that can be improved: The shell script has a #filename="$1" in it. This is not accidental, as the file name should be feeded to the script by the launch agent as an argument, but that doesn't work. It is possible to put the script in the launch agent itsself. I am not sure how secure this solution is, as it uses eval with user provided strings. It should be mentioned that Apple intended a somewhat similar approach by putting stuff in ~/launchd.conf, but it is currently unsupported as to this date and OS (see the manpage of launchd.conf). I guess that things like globbing would not work as they do in this proposal. Finally, I would mention the sources I used as information on Launch Agents, but StackExchange doesn't let me [1], [2], [3]. Again, I am sorry that this is not a real question, I still hope it is useful.

  Read the article

• Issue in nginx proxying to apache

  - by Luis Masuelli

  My current nginx configuration is as follows: specific configuration for (currently two) domains: server { listen 443 ssl; server_name studiotv.service.tebusco.lan phpmyadmin.service.tebusco.lan; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { proxy_pass http://127.0.0.1:8180; proxy_set_header Host $http_host:8180; } } default configuration for unmatched ssl connections: server { listen 443 default ssl; ssl_certificate /home/administrador/nginx-confs/ssl/service.tebusco.lan.crt; ssl_certificate_key /home/administrador/nginx-confs/ssl/service.tebusco.lan.key; location / { return 403; } } http configuration: server { listen 80; rewrite ^ https://$host$request_uri? permanent; } The intention is clear: Redirect http traffic to https. Proxy each https:// call from phpmyadmin.service.tebusco.lan and studiotv.service.tebusco.lan to apache2. This includes passing a host header, which is detected. Each unmatched ssl connection must return a 403 in nginx. Does not even reach apache2. In the apache2 side of the life, I have a default site, and a non-default site which will match studiotv.service.tebusco.lan: 000-default.conf file (available and enabled): <VirtualHost 127.0.0.1:8180> # The ServerName directive sets the request scheme, hostname and port that # the server uses to identify itself. This is used when creating # redirection URLs. In the context of virtual hosts, the ServerName # specifies what hostname must appear in the request's Host: header to # match this virtual host. For the default virtual host (this file) this # value is not decisive as it is used as a last resort host regardless. # However, you must set it for any further virtual host explicitly. ServerName localhost ServerAdmin webmaster@localhost DocumentRoot /var/www/html <Directory /var/www/html> Order deny,allow Require all granted </Directory> </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet studiotv.conf file (available and enabled): <VirtualHost *:8180> ServerName studiotv.service.tebusco.lan ServerAdmin [email protected] DocumentRoot /var/www/studiotv <Directory /var/www/studiotv/> Options -Indexes +FollowSymLinks AllowOverride None Order deny,allow Allow from all Require all granted </Directory> # Available loglevels: trace8, ..., trace1, debug, info, notice, warn, # error, crit, alert, emerg. # It is also possible to configure the loglevel for particular # modules, e.g. #LogLevel info ssl:warn # No usamos ${APACHE_LOG_DIR} sino en su lugar /var/log/<host> ErrorLog /var/log/apache2/studiotv/error.log CustomLog /var/log/apache2/studiotv/access.log combined </VirtualHost> # vim: syntax=apache ts=4 sw=4 sts=4 sr noet However, when I hit the browser with http://studiotv.service.tebusco.lan, the default php page is shown instead. Question: What am I missing? (apache 2.4.7, nginx 1.6.0, ubuntu server 14.04).

  Read the article

• need assistance with my.cnf - 1500% CPU usage

  - by Alan Long

  I'm running into a few issues with our new database server. It is a HP G8 with 2 INTEL XEON E5-2650 processors and 32GB of ram. This server is dedicated as a MySQL server (5.1.69) for our intranet portal. I have been having issues with this server staying alive - I notice high CPU usage during certain times of day (8% ~ 1500%+) and see very low memory usage (7 ~ 15%) based on using the 'top' command. When the CPU usage passes 1000%, that is when the app usually dies. I'm trying to see what I'm doing wrong with the config file, hopefully one of the experts can chime in and let me know what they think. See below for my.cnf file: [mysqld] default-storage-engine=InnoDB datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #user=mysql large-pages # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_connections=275 tmp_table_size=1G key_buffer_size=384M key_buffer=384M thread_cache_size=1024 long_query_time=5 low_priority_updates=1 max_heap_table_size=1G myisam_sort_buffer_size=8M concurrent_insert=2 table_cache=1024 sort_buffer_size=8M read_buffer_size=5M read_rnd_buffer_size=6M join_buffer_size=16M table_definition_cache=6k open_files_limit=8k slow_query_log #skip-name-resolve # Innodb Settings innodb_buffer_pool_size=18G innodb_thread_concurrency=0 innodb_log_file_size=1G innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_lock_wait_timeout=50 innodb_file_per_table #innodb_buffer_pool_instances=4 #eliminating double buffering innodb_flush_method = O_DIRECT flush_time=86400 innodb_additional_mem_pool_size=40M #innodb_io_capacity = 5000 #innodb_read_io_threads = 64 #innodb_write_io_threads = 64 # increase until threads_created doesnt grow anymore thread_cache=1024 query_cache_type=1 query_cache_limit=4M query_cache_size=256M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 0 wait_timeout = 1800 connect_timeout = 10 interactive_timeout = 60 [mysqldump] max_allowed_packet=32M [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid log-slow-queries=/var/log/mysql/slow-queries.log long_query_time = 1 log-queries-not-using-indexes we connect to one database with 75 tables, the largest table has 1,150,000 entries and the second largest has 128,036 entries. I have also verified that our PHP queries are optimized as best as possible. Reference - MySQLtuner: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.69-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 420M (Tables: 75) [!!] Total fragmented tables: 75 -------- Security Recommendations ------------------------------------------- [!!] User '[email protected]' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 1h 14m 50s (8M q [1K qps], 705 conn, TX: 6B, RX: 892M) [--] Reads / Writes: 68% / 32% [--] Total buffers: 19.7G global + 35.2M per thread (275 max threads) [!!] Maximum possible memory usage: 29.1G (93% of installed RAM) [OK] Slow queries: 0% (472/8M) [OK] Highest usage of available connections: 66% (183/275) [OK] Key buffer size / total MyISAM indexes: 384.0M/91.0K [OK] Key buffer hit rate: 100.0% (173 cached / 0 reads) [OK] Query cache efficiency: 96.2% (7M cached / 7M selects) [!!] Query cache prunes per day: 553614 [OK] Sorts requiring temporary tables: 0% (3 temp sorts / 1K sorts) [!!] Temporary tables created on disk: 49% (3K on disk / 7K total) [OK] Thread cache hit rate: 74% (183 created / 705 connections) [OK] Table cache hit rate: 97% (231 open / 238 opened) [OK] Open file limit used: 0% (17/8K) [OK] Table locks acquired immediately: 100% (432K immediate / 432K locks) [OK] InnoDB data size / buffer pool: 420.9M/18.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 256M) [see warning above] Thanks in advanced for your help!

  Read the article

• How to save a ntfs partition which suddenly became empty

  - by SteveO

  One ntfs partition of my laptop was suddenly wiped out without any notice to me, when I rebooted from Windows 7 to Ubuntu 12.04 today. I am in need of help to save my files on that partition, which are important and unfortunately haven't been backed up yet. My laptop has two operating systems: Windows 7 and Ubuntu 12.04. with a ntfs partition shared between the two operating systems for storing some data files (109GB, about 97%of which has been used). I have almost always been using Ubuntu, but today I happened to have to work under Windows. Following is a record of what happened in the time order, numbering according to which operating system I was in at each stage. When I started into Windows 7, right before being able to log in, it took a while and two reboots to configure the Windows. I thought it was normal, since last time when I was using Windows two weeks ago, it took very long and several reboots to update Windows, since the last time I used Windows before then was in November last year. Then after finally being able to log in Windows 7, I installed Libre Office, MathType (I got it from http://dl.portablesoft.org/down/?id=2515, which I originally thought was a trial version, but later I learned was a cracked version and felt wrong. I made a copy of it at dropbox http://dl.dropbox.com/u/13029929/MathType_6.8_PortableSoft.rar, not for distributing it but to list it there just in case it will help to identify the problem), and MikTex. I then edited some .doc files in the ntfs partition under both Microsoft Office with MathType, and Libre Office. When I finished working under Windows and rebooted into Ubuntu, Ubuntu did some filesystem checking and reported that the ntfs partition was not able to be mounted. Then I rebooted again into Windows, and found that the ntfs partition had been emptied, i.e. all the data files were gone, and only one system file bootsqm.dat and one system directory System Volume Information were there, with their last updated time being the time when I first rebooted from Windows to Ubuntu (in fact, it is 4 hours in advanced than the actual time of that rebooting , see immediately below) Also I noticed that the time shown by Windows is not correct for my time zone (UTC-05:00) Eastern Time (US & Canada)), which is 4 hours in advance than the correct time (my current time is 3am, but the computer shows 7am). Same things happened when I rebooted into Ubuntu again: the ntfs has been emptied and left with only one Windows system file bootsqm.dat and one Windows system directory System Volume Information. the time shown by Ubuntu is 4 hours in advance than the correct time. I wonder what I can do to retrieve my data files back on the ntfs partition? If I am not able to do it myself, will some professionals be able to help me out? Thanks a lot! PS: I didn't think I did any thing that required emptying that partition. But there were quite some works I did during that stage right before the reboot from Windows to Ubuntu when the problem occured. Did I make any mis-operation?

  Read the article

• USB connection is unstable with Nexus S 2.3.4 on AMD 64 running 64-bit Windows 7, but works with 32-bit Windows Vista

  - by Mike

  The USB connection is unstable with Nexus S (Android 2.3.4) on AMD 64 running 64-bit Windows 7, but it works with 32-bit Windows Vista. Problem Description: On the 64-bit Windows 7 machine my Nexus S appears to connect, but then it disconnects moments later. Neither accessing USB storage or loading an Android application package file (APK) using the Android Debug Bridge (ADB) work. On 32-bit Windows Vista using the same USB cable, USB storage works. I haven't tried the ADB on 32-bit Windows Vista. Reproduction steps for USB storage: (I have provided the reproduction steps for USB storage and not ADB, because if one isn't working, then the other isn't working either and the USB storage reproduction steps are shorter to document.) Connect the USB cable to the Nexus S and my Windows 7 machine. Effect: The "USB Mass Storage, USB Connected" dialog appears with the button "Turn on USB storage." Click "Turn on USB Storage" Effect: The "working circle" appears. A dialog briefly appears saying "USB storage in use," then it either returns me to Step 1 (now that I am running 2.3.4) or is replaced with the Nexus S's application homepage (while I was running 2.3.3). I'm not sure if the version matters, but I mention it for completeness. On the 32-bit Windows Vista machine the connection is stable. I am able to navigate through the Nexus S file system create, read, update, and delete files, etc. I haven't tried connecting with the ADB. Troubleshooting summary: Tried and failed: Uninstalling and reinstalling the Android USB drivers including removing the files. Uninstalling my custom software Pulling the Nexus S's battery Restarting the Nexus S Restarting 64-bit Windows 7 Changing USB ports on the 64-bit Windows 7 box Compared the dates and file size on the DLLs in my google-usb_driver\amd64 directory and the windows\System32 directory. They match. The sizes for the google-usb_driver\i386 directory do not match (expected). Turning off Debugging mode on the Nexus S does not resolve the problem. Searching Google. Tried and succeeded: Connecting to another machine (Windows Vista) using the same USB cable and Nexus S phone. Troubleshooting observations: I notice that uninstalling the device drivers and deleting the files, then reinstalling the drivers, then rebooting 64-bit Windows 7 then unplugging the Nexus S, then plugging it back in occasionally helps for a short amount of time (minutes to hours, not days). When it is working, I can both access the Nexus S's drive and load/test applications using the ADB. I have observed some wonky behavior in the Device Manager that I haven't tracked down. Sometimes the black Nexus S image appears in the list of devices. Sometimes the image displays as a computer with a green ISA card. Sometimes it neither appears on the top level of devices nor under “other devices,” but it does appear under "disk drives" as "Android UMS Composite USB Device." System configuration: The Nexus S is running Android OS 2.3.4's "Settings\about phone\System updates" indicates that it is up to date as of May 21st 2011. Both 32-bit Windows Vista and 64-bit Windows 7 are up to date. The Windows Vista system is running on an Intel 32-bit processor. Windows 7 is running on an AMD 64-bit processor. I have done Android development on both systems, but I usually develop on the 64-bit Windows 7 machine.

  Read the article

• Hard drive write speed - finding a lighter antivirus?

  - by Shingetsu

  I recently have been getting a lot of system lag here (for example, the mouse and the display in general take about 15 seconds to react in the worst cases). After a lot of monitoring the resources, I found that the problem mainly happens when too much Disk I/O is being done. Three culprits have been identified: My browser had the highest write I/O with 35,000,000 I/O Write Bytes. Steam had the highest read I/O (when IDLE!!!) with 106,000,000 I/O Read Bytes. My antivirus (in both cases I will soon mention) was the runner up in both cases with: 30,000,000ish write and 80,000,000ish read. The first AV I had was Avast! which I had liked on my previous system. After noticing it taking so much I/O I switched to Panda (supposing it wouldn't use TOO much during idle phase). However it only used a bit less I/O. Just a lot less memory and cpu and somewhat more network. My browser at the moment is Maxthon 3 (which I like a lot). Before this I was running chrome which had similar data and much higher cpu when running in the background was enabled. I'm not going to be running steam all the time and there aren't many alternatives to it. I like my browser very much, but I AM willing to switch if there's an obvious problem (I'm in programming, however I'm not a very good sysadmin, especially not when it comes to windows). Finally, my system almost stops lagging when I turn off the antivirus (and preferably steam) (some remains but once in every 5-6 hours for a few seconds so it isn't a big problem). My question (has a few parts): Is it possible to configure steam to lower it's I/O usage? (and maybe network while we're at it?) Which antivirus (very preferably free) uses lowest I/O while idle (I leave PC alone during active scans so that isn't a problem). Is there an obvious problem with my current browser and, if so, is there a way to fix it or should I switch and, if so, to what? (P.S. I've been on FFox for some time too). Info on system: Windows 7 (32 bit T_T, I am getting a new one in a few months but I want to keep using system during that time though). Hard Drive (main) is a Raid0. (Also have an external 1TB one which contains steam (and steam alone). As such it doesn't get used by much anything other than steam and isn't a very large problem. However steam still uses some I/O of registry) CPU: Intel(R) Core(TM)2 CPU [email protected] RAM: 6GB (3.25GB usable) (this and CPU have little effect as shown in next section) Additional info: Memory usage during problematic times: 44% CPU usage during problematic times: 35% Page File: main drive: system managed. 1TB drive: none. The current system I'm using is about 6 years old and is mainly a place holder while I await the new one in a few months. Final words: this is my 1st post on Super User (this question wouldn't feel right on Stack Overflow where I usually stay). If it doesn't have it's place here please tell me. If anything is wrong with it, same. Edit Technically I'm looking for a live thread detection program with minimal IO usage. I already have good active scan capability: Kaspersky (the free scanner uses the paid database) and MalwareBytes. Edit 2 Noticed another one, it seems that windows media player has been using stuff even when off! Turning it off and restarting now. If the problem is fixed I'll tell you guys. The reason I didn't notice it before was because I didn't have resource manager in front of me at the MOMENT of the problem. Now I did and it was at the very top of the list!

  Read the article

• The application called an interface that was marshalled for a different thread

  - by X-Ray

  i'm writing a delphi app that communicates with excel. one thing i noticed is that if i call the Save method on the Excel workbook object, it can appear to hang because excel has a dialog box open for the user. i'm using the late binding. i'd like for my app to be able to notice when Save takes several seconds and then take some kind of action like show a dialog box telling this is what's happening. i figured this'd be fairly easy. all i'd need to do is create a thread that calls Save and have that thread call Excel's Save routine. if it takes too long, i can take some action. procedure TOfficeConnect.Save; var Thread:TOfficeHangThread; begin // spin off as thread so we can control timeout Thread:=TOfficeSaveThread.Create(m_vExcelWorkbook); if WaitForSingleObject(Thread.Handle, 5 {s} * 1000 {ms/s})=WAIT_TIMEOUT then begin Thread.FreeOnTerminate:=true; raise Exception.Create(_('The Office spreadsheet program seems to be busy.')); end; Thread.Free; end; TOfficeSaveThread = class(TThread) private { Private declarations } m_vExcelWorkbook:variant; protected procedure Execute; override; procedure DoSave; public constructor Create(vExcelWorkbook:variant); end; { TOfficeSaveThread } constructor TOfficeSaveThread.Create(vExcelWorkbook:variant); begin inherited Create(true); m_vExcelWorkbook:=vExcelWorkbook; Resume; end; procedure TOfficeSaveThread.Execute; begin m_vExcelWorkbook.Save; end; i understand this problem happens because the OLE object was created from another thread (absolutely). how can i get around this problem? most likely i'll need to "re-marshall" for this call somehow... any ideas? thank you!

  Read the article

• Runge-Kutta (RK4) integration for game physics

  - by Kai

  Gaffer on Games has a great article about using RK4 integration for better game physics. The implementation is straightforward but the math behind it confuses me. I understand derivatives and integrals on a conceptual level but I haven't manipulated equations in a long time. Here's the brunt of Gaffer's implementation: void integrate(State &state, float t, float dt) { Derivative a = evaluate(state, t, 0.0f, Derivative()); Derivative b = evaluate(state, t+dt*0.5f, dt*0.5f, a); Derivative c = evaluate(state, t+dt*0.5f, dt*0.5f, b); Derivative d = evaluate(state, t+dt, dt, c); const float dxdt = 1.0f/6.0f * (a.dx + 2.0f*(b.dx + c.dx) + d.dx); const float dvdt = 1.0f/6.0f * (a.dv + 2.0f*(b.dv + c.dv) + d.dv) state.x = state.x + dxdt * dt; state.v = state.v + dvdt * dt; } Can anybody explain in simple terms how RK4 works? Specifically, why are we averaging the derivatives at 0.0f, 0.5f, 0.5f, and 1.0f? How is averaging derivatives up to the 4th order different from doing a simple euler integration with a smaller timestep? After reading the accepted answer below, and several other articles, I have a grasp on how RK4 works. To answer my own questions: Can anybody explain in simple terms how RK4 works? RK4 takes advantage of the fact that we can get a much better approximation of a function if we use its higher-order derivatives rather than just the first or second derivative. That's why the Taylor series converges much faster than Euler approximations. (take a look at the animation on the right side of that page) Specifically, why are we averaging the derivatives at 0.0f, 0.5f, 0.5f, and 1.0f? The Runge-Kutta method is an approximation of a function that samples derivatives of several points within a timestep, unlike the Taylor series which only samples derivatives of a single point. After sampling these derivatives we need to know how to weigh each sample to get the closest approximation possible. An easy way to do this is to pick constants that coincide with the Taylor series, which is how the constants of a Runge-Kutta equation are determined. This article made it clearer for me: http://web.mit.edu/10.001/Web/Course%5FNotes/Differential%5FEquations%5FNotes/node5.html. Notice how (15) is the Taylor series expansion while (17) is the Runge-Kutta derivation. How is averaging derivatives up to the 4th order different from doing a simple euler integration with a smaller timestep? Mathematically it converges much faster than doing many Euler approximations. Of course, with enough Euler approximations we can gain equal accuracy to RK4, but the computational power needed doesn't justify using Euler.

  Read the article

• Unable to resolve class in build.gradle using Android Studio 0.60/Gradle 0.11

  - by saywhatnow

  Established app working fine using Android Studio 0.5.9/ Gradle 0.9 but upgrading to Android Studio 0.6.0/ Gradle 0.11 causes the error below. Somehow Studio seems to have lost the ability to resolve the android tools import at the top of the build.gradle file. Anyone got any ideas on how to solve this? build file 'Users/[me]/Repositories/[project]/[module]/build.gradle': 1: unable to resolve class com.android.builder.DefaultManifestParser @ line 1, column 1. import com.android.builder.DefaultManifestParser 1 error at org.codehaus.groovy.control.ErrorCollector.failIfErrors(ErrorCollector.java:302) at org.codehaus.groovy.control.CompilationUnit.applyToSourceUnits(CompilationUnit.java:858) at org.codehaus.groovy.control.CompilationUnit.doPhaseOperation(CompilationUnit.java:548) at org.codehaus.groovy.control.CompilationUnit.compile(CompilationUnit.java:497) at groovy.lang.GroovyClassLoader.doParseClass(GroovyClassLoader.java:306) at groovy.lang.GroovyClassLoader.parseClass(GroovyClassLoader.java:287) at org.gradle.groovy.scripts.internal.DefaultScriptCompilationHandler.compileScript(DefaultScriptCompilationHandler.java:115) ... 77 more 2014-06-09 10:15:28,537 [ 92905] INFO - .BaseProjectImportErrorHandler - Failed to import Gradle project at '/Users/[me]/Repositories/[project]' org.gradle.tooling.BuildException: Could not run build action using Gradle distribution 'http://services.gradle.org/distributions/gradle-1.12-all.zip'. at org.gradle.tooling.internal.consumer.ResultHandlerAdapter.onFailure(ResultHandlerAdapter.java:53) at org.gradle.tooling.internal.consumer.async.DefaultAsyncConsumerActionExecutor$1$1.run(DefaultAsyncConsumerActionExecutor.java:57) at org.gradle.internal.concurrent.DefaultExecutorFactory$StoppableExecutorImpl$1.run(DefaultExecutorFactory.java:64) [project]/[module]/build.gradle import com.android.builder.DefaultManifestParser apply plugin: 'android-sdk-manager' apply plugin: 'android' android { sourceSets { main { manifest.srcFile 'src/main/AndroidManifest.xml' res.srcDirs = ['src/main/res'] } debug { res.srcDirs = ['src/debug/res'] } release { res.srcDirs = ['src/release/res'] } } compileSdkVersion 19 buildToolsVersion '19.0.0' defaultConfig { minSdkVersion 14 targetSdkVersion 19 } signingConfigs { release } buildTypes { release { runProguard false proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-rules.txt' signingConfig signingConfigs.release applicationVariants.all { variant -> def file = variant.outputFile def manifestParser = new DefaultManifestParser() def wmgVersionCode = manifestParser.getVersionCode(android.sourceSets.main.manifest.srcFile) println wmgVersionCode variant.outputFile = new File(file.parent, file.name.replace("-release.apk", "_" + wmgVersionCode + ".apk")) } } } packagingOptions { exclude 'META-INF/LICENSE.txt' exclude 'META-INF/NOTICE.txt' } } def Properties props = new Properties() def propFile = file('signing.properties') if (propFile.canRead()){ props.load(new FileInputStream(propFile)) if (props!=null && props.containsKey('STORE_FILE') && props.containsKey('STORE_PASSWORD') && props.containsKey('KEY_ALIAS') && props.containsKey('KEY_PASSWORD')) { println 'RELEASE BUILD SIGNING' android.signingConfigs.release.storeFile = file(props['STORE_FILE']) android.signingConfigs.release.storePassword = props['STORE_PASSWORD'] android.signingConfigs.release.keyAlias = props['KEY_ALIAS'] android.signingConfigs.release.keyPassword = props['KEY_PASSWORD'] } else { println 'RELEASE BUILD NOT FOUND SIGNING PROPERTIES' android.buildTypes.release.signingConfig = null } }else { println 'RELEASE BUILD NOT FOUND SIGNING FILE' android.buildTypes.release.signingConfig = null } repositories { maven { url 'https://repo.commonsware.com.s3.amazonaws.com' } maven { url 'https://oss.sonatype.org/content/repositories/snapshots/' } } dependencies { compile 'com.github.gabrielemariotti.changeloglib:library:1.4.+' compile 'com.google.code.gson:gson:2.2.4' compile 'com.google.android.gms:play-services:+' compile 'com.android.support:appcompat-v7:+' compile 'com.squareup.okhttp:okhttp:1.5.+' compile 'com.octo.android.robospice:robospice:1.4.11' compile 'com.octo.android.robospice:robospice-cache:1.4.11' compile 'com.octo.android.robospice:robospice-retrofit:1.4.11' compile 'com.commonsware.cwac:security:0.1.+' compile 'com.readystatesoftware.sqliteasset:sqliteassethelper:+' compile 'com.android.support:support-v4:19.+' compile 'uk.co.androidalliance:edgeeffectoverride:1.0.1+' compile 'de.greenrobot:eventbus:2.2.1+' compile project(':captureActivity') compile ('de.keyboardsurfer.android.widget:crouton:1.8.+') { exclude group: 'com.google.android', module: 'support-v4' } compile files('libs/CWAC-LoaderEx.jar') }

  Read the article

• Download a file with DefaultHTTPClient and preemptive authentication

  - by Nils

  After I had a lot of problems with preemptive authentication , I got it finally working. Now the next problem. I want to get a file with it, but I don't know how. I thought the file data might be in the variable response, but it isn't. Any ideas how this might work? I'm trying it since days without success :( - Basically I'm trying to download an jpeg file, which is on a server protected by prem. auth. // BASIC AUTH /* * ==================================================================== * * Licensed to the Apache Software Foundation (ASF) under one or more * contributor license agreements. See the NOTICE file distributed with * this work for additional information regarding copyright ownership. * The ASF licenses this file to You under the Apache License, Version 2.0 * (the "License"); you may not use this file except in compliance with * the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * ==================================================================== * * This software consists of voluntary contributions made by many * individuals on behalf of the Apache Software Foundation. For more * information on the Apache Software Foundation, please see * <http://www.apache.org/>. */ //http://svn.apache.org/repos/asf/httpcomponents/httpclient/branches/4.0.x/httpclient/src/examples/org/apache/http/examples/client/ClientPreemptiveBasicAuthentication.java httpclient = new DefaultHttpClient(); httpclient.getCredentialsProvider().setCredentials( new AuthScope(host, port), new UsernamePasswordCredentials(username, password)); // Generate BASIC scheme object and stick it to the local // execution context BasicHttpContext localcontext = new BasicHttpContext(); BasicScheme basicAuth = new BasicScheme(); localcontext.setAttribute("preemptive-auth", basicAuth); //first request interceptor httpclient.addRequestInterceptor(new PreemptiveAuth(), 0); HttpHost targetHost = new HttpHost(host, port, "http"); //HttpGet httpget = new HttpGet("/"); HttpGet httpget = new HttpGet(http.url); System.out.println("executing request" + httpget.getRequestLine()); /// !!! HttpResponse response = httpclient.execute(targetHost, httpget, localcontext); HttpEntity entity = response.getEntity(); System.out.println("----------------------------------------"); System.out.println("+"+response.getStatusLine()+"+"); ...

  Read the article

< Previous Page | 151 152 153 154 155 156 157 158 159 160 161 162  | Next Page >