Search Results

Search found 4520 results on 181 pages for 'notice'.

Page 162/181 | < Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >

• Database users in the Oracle Utilities Application Framework

  - by Anthony Shorten

  I mentioned the product database users fleetingly in the last blog post and they deserve a better mention. This applies to all versions of the Oracle Utilities Application Framework. The Oracle Utilities Application Framework uses up to three users initially as part of the base operations of the product. The type of database supported (the framework supports Oracle, IBM DB2 and Microsoft SQL Server) dictates the number of users used and their permissions. For publishing brevity I will outline what is available for the Oracle database and, in summary, mention where it differs for the other database supported. For Oracle database customers we ship three distinct database users: Administration User (SPLADM or CISADM by default) - This is the database user that actually owns the schema. This user is not used by the product to do any DML (Data Manipulation Language) SQL other than that is necessary for maintenance of the database. This database user performs all the DCL (Data Control Language) and DDL (Data Definition Language) against the database. It is typically reserved for Database Administration use only. Product Read Write User (SPLUSER or CISUSER by default) - This is the database user used by the product itself to execute DML (Data Manipulation Language) statements against the schema owned by the Administration user. This user has the appropriate read and write permission to objects within the schema owned by the Administration user. For databases such as DB2 and SQL Server we may not create this user but use other DCL (Data Control Language) statements and facilities to simulate this user. Product Read User (SPLREAD or CISREAD by default) - This is the database that has read only permission to the schema owned by the Administration user. It is used for reporting or any part of the product or interface that requires read permissions to the database (for example, products that have ConfigLab and Archiving use this user for remote access). For databases such as DB2 and SQL Server we may not create this user but use other DCL (Data Control Language) statements and facilities to simulate this user. You may notice the words by default in the list above. The values supplied with the installer are the default and can be changed to what the site standard or implementation wants to use (as long as they conform to the standards supported by the underlying database). You can even create multiples of each within the same database and pointing to same schema. To manage the permissions for the users, there is a utility provided with the installation (oragensec (Oracle), db2gensec (DB2) or msqlgensec (SQL Server)) that generates the security definitions for the above users. That can be executed a number of times for each schema to give users appropriate permissions. For example, it is possible to define more than one read/write User to access the database. This is a common technique used by implementations to have a different user per access mode (to separate online and batch). In fact you can also allocate additional security (such as resource profiles in Oracle) to limit the impact of specific users at the database. To facilitate users and permissions, in Oracle for example, we create a CISREAD role (read only role) and a CISUSER role (read write role) that can be allocated to the appropriate database user. When the security permissions utility, oragensec in this case, is executed it uses the role to determine the permissions. To give you a case study, my underpowered laptop has multiple installations on it of multiple products but I have one database. I create a different schema for each product and each version (with my own naming convention to help me manage the databases). I create individual users on each schema and run oragensec to maintain the permissions for each appropriately. It works fine as long I have setup the userids appropriately. This means: Creating the users with the appropriate roles. I use the common CISUSER and CISREAD role across versions and across Oracle Utilities Application Framework products. Just remember to associate the CISUSER role with the database user you want to use for read/write operations and the CISREAD role with the user you wish to use for the read only operations. The role is treated as a tag to indicate the oragensec utility which appropriate permissions to assign to the user. The utilities for the other database types essentially do the same, obviously using the technology available within those databases. Run oragensec against the read write user and read only user against the appropriate administration user (I will abbreviate the user to ADM user). This ensures the right permissions are allocated to the right users for the right products. To help me there, I use the same prefix on the user name for the same product. For example, my Oracle Utilities Application Framework V4 environment has the administration user set to FW4ADM and the associated FW4USER and FW4READ as the users for the product to use. For my MWM environment I used MWMADM for the administration user and MWMUSER and MWMREAD for my associated users. You get the picture. When I run oragensec (once for each ADM user), I know what other users to associate with it. Remember to rerun oragensec against the users if I run upgrades, service packs or database based single fixes. This assures that the users are in synchronization with the ADM user. As a side note, for those who do not understand the difference between DML, DCL and DDL: DDL (Data Definition Language) - These are SQL statements that define the database schema and the structures within. SQL Statements such as CREATE and DROP are examples of DDL SQL statements. DCL (Data Control Language) - These are the SQL statements that define the database level permissions to DDL maintained objects within the database. SQL Statements such as GRANT and REVOKE are examples of DCL SQL statements. DML (Database Manipulation Language) - These are SQL statements that alter the data within the tables. SQL Statements such as SELECT, INSERT, UPDATE and DELETE are examples of DML SQL statements. Hope this has clarified the database user support. Remember in Oracle Utilities Application Framework V4 we enhanced this by also supporting CLIENT_IDENTIFIER to allow the database to still use the administration user for the main processing but make the database session more traceable.

  Read the article

• Upgrading Windows 8 boot to VHD to Windows 8.1&ndash;Step by step guide

  - by Liam Westley

  Originally posted on: http://geekswithblogs.net/twickers/archive/2013/10/19/upgrading-windows-8-boot-to-vhd-to-windows-8.1ndashstep-by.aspxBoot to VHD – dual booting Windows 7 and Windows 8 became easy When Windows 8 arrived, quite a few people decided that they would still dual boot their machines, and instead of mucking about with resizing disk partitions to free up space for Windows 8 they decided to use the boot from VHD feature to create a huge hard disc image into which Windows 8 could be installed.  Scott Hanselman wrote this installation guide, while I myself used the installation guide from Ed Bott of ZD net fame. Boot to VHD is a great solution, it achieves a dual boot, can be backed up easily and had virtually no effect on the original Windows 7 partition. As a developer who has dual booted Windows operating systems for years, hacking boot.ini files, the boot to VHD was a much easier solution. Upgrade to Windows 8.1 – ah, you can’t do that on a virtual disk installation (boot to VHD) Last week the final version of Windows 8.1 arrived, and I went into the Windows Store to upgrade.  Luckily I’m on a fast download service, and use an SSD, because once the upgrade was downloaded and prepared Windows informed that This PC can’t run Windows 8.1, and provided the reason, You can’t install Windows on a virtual drive.  You can see an image of the message and discussion that sparked my search for a solution in this Microsoft Technet forum post. I was determined not to have to resize partitions yet again and fiddle with VHD to disk utilities and back again, and in the end I did succeed in upgrading to a Windows 8.1 boot to VHD partition.  It takes quite a bit of effort though … tldr; Simple steps of how you upgrade Boot into Windows 7 – make a copy of your Windows 8 VHD, to become Windows 8.1 Enable Hyper-V in your Windows 8 (the original boot to VHD partition) Create a new virtual machine, attaching the copy of your Windows 8 VHD Start the virtual machine, upgrade it via the Windows Store to Windows 8.1 Shutdown the virtual machine Boot into Windows 7 – use the bcedit tool to create a new Windows 8.1 boot to VHD option (pointing at the copy) Boot into the new Windows 8.1 option Reactivate Windows 8.1 (it will have become deactivated by running under Hyper-V) Remove the original Windows 8 VHD, and in Windows 7 use bcedit to remove it from the boot menu Things you’ll need A system that can run Hyper-V under Windows 8 (Intel i5, i7 class CPU) Enough space to have your original Windows 8 boot to VHD and a copy at the same time An ISO or DVD for Windows 8 to create a bootable Windows 8 partition Step by step guide Boot to your base o/s, the real one, Windows 7. Make a copy of the Windows 8 VHD file that you use to boot Windows 8 (via boot from VHD) – I copied it from a folder on C: called VHD-Win8 to VHD-Win8.1 on my N: drive. Reboot your system into Windows 8, and enable Hyper-V if not already present (this may require reboot) Use the Hyper-V manager , create a new Hyper-V machine, using half your system memory, and use the option to attach an existing VHD on the main IDE controller – this will be the new copy you made in Step 2. Start the virtual machine, use Connect to view it, and you’ll probably discover it cannot boot as there is no boot record If this is the case, go to Hyper-V manager, edit the Settings for the virtual machine to attach an ISO of a Windows 8 DVD to the second IDE controller. Start the virtual machine, use Connect to view it, and it should now attempt a fresh installation of Windows 8.  You should select Advanced Options and choose Repair - this will make VHD bootable When the setup reboots your virtual machine, turn off the virtual machine, and remove the ISO of the Windows 8 DVD from the virtual machine settings. Start virtual machine, use Connect to view it.  You will see the devices to be re-discovered (including your quad CPU becoming single CPU).  Eventually you should see the Windows Login screen. You may notice that your desktop background (Win+D) will have turned black as your Windows installation has become deactivate due to the hardware changes between your real PC and Hyper-V. Fortunately becoming deactivated, does not stop you using the Windows Store, where you can select the update to Windows 8.1. You can now watch the progress joy of the Windows 8 update; downloading, preparing to update, checking compatibility, gathering info, preparing to restart, and finally, confirm restart - remember that you are restarting your virtual machine sitting on the copy of the VHD, not the Windows 8 boot to VHD you are currently using to run Hyper-V (confused yet?) After the reboot you get the real upgrade messages; setting up x%, xx%, (quite slow) After a while, Getting ready Applying PC Settings x%, xx% (really slow) Updating your system (fast) Setting up a few more things x%, (quite slow) Getting ready, again Accept license terms Express settings Confirmed previous password Next, I had to set up a Microsoft account – which is possibly now required, and not optional Using the Microsoft account required a 2 factor authorization, via text message, a 7 digit code for me Finalising settings Blank screen, HI .. We're setting up things for you (similar to original Windows 8 install) 'You can get new apps from the Store', below which is ’Installing your apps’ - I had Windows Media Center which is counts as an app from the Store ‘Taking care of a few things’, below which is ‘Installing your apps’ ‘Taking care of a few things’, below ‘Don't turn off your PC’ ‘Getting your apps ready’, below ‘Don't turn off your PC’ ‘Almost ready’, below ‘Don't turn off your PC’ … finally, we get the Windows 8.1 start menu, and a quick Win+D to check the desktop confirmed all the application icons I expected, pinned items on the taskbar, and one app moaning about a missing drive At this point the upgrade is complete – you can shutdown the virtual machine Reboot from the original Windows 8 and return to Windows 7 to configure booting to the Windows 8.1 copy of the VHD In an administrator command prompt do following use the bcdedit tool (from an MSDN blog about configuring VHD to boot in Windows 7) Type bcedit to list the current boot options, so you can copy the GUID (complete with brackets/braces) for the original Windows 8 boot to VHD Create a new menu option, copy of the Windows 8 option; bcdedit /copy {originalguid} /d "Windows 8.1" Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} device vhd=[D:]\Image.vhd Point the new Windows 8.1 option to the copy of the VHD; bcdedit /set {newguid} osdevice vhd=[D:]\Image.vhd Set autodetection of the HAL (may already be set); bcdedit /set {newguid} detecthal on Reboot from Windows 7 and select the new option 'Windows 8.1' on the boot menu, and you’ll have some messages to look at, as your hardware is redetected (as you are back from 1 CPU to 4 CPUs) ‘Getting devices ready, blank then %xx, with occasional blank screen, for the graphics driver, (fast-ish) Getting Ready message (fast) You will have to suffer one final reboots, choose 'Windows 8.1' and you can now login to a lovely Windows 8.1 start screen running on non virtualized hardware via boot to VHD After checking everything is running fine, you can now choose to Activate Windows, which for me was a toll free phone call to the automated system where you type in lots of numbers to be given a whole bunch of new activation codes. Once you’re happy with your new Windows 8.1 boot to VHD, and no longer need the Windows 8 boot to VHD, feel free to delete the old one.  I do believe once you upgrade, you are no longer licensed to use it anyway. There, that was simple wasn’t it? Looking at the huge list of steps it took to perform this upgrade, you may wonder whether I think this is worth it.  Well, I think it is worth booting to VHD.  It makes backups a snap (go to Windows 7, copy the VHD, you backed up the o/s) and helps with disk management – want to move the o/s, you can move the VHD and repoint the boot menu to the new location. The downside is that Microsoft has complete neglected to support boot to VHD as an upgradable option.  Quite a poor decision in my opinion, and if you read twitter and the forums quite a few people agree with that view.  It’s a shame this got missed in the work on creating the upgrade packages for Windows 8.1.

  Read the article

• Use an Ubuntu Live CD to Securely Wipe Your PC’s Hard Drive

  - by Trevor Bekolay

  Deleting files or quickly formatting a drive isn’t enough for sensitive personal information. We’ll show you how to get rid of it for good using a Ubuntu Live CD. When you delete a file in Windows, Ubuntu, or any other operating system, it doesn’t actually destroy the data stored on your hard drive, it just marks that data as “deleted.” If you overwrite it later, then that data is generally unrecoverable, but if the operating system don’t happen to overwrite it, then your data is still stored on your hard drive, recoverable by anyone who has the right software. By securely delete files or entire hard drives, your data will be gone for good. Note: Modern hard drives are extremely sophisticated, as are the experts who recover data for a living. There is no guarantee that the methods covered in this article will make your data completely unrecoverable; however, they will make your data unrecoverable to the majority of recovery methods, and all methods that are readily available to the general public. Shred individual files Most of the data stored on your hard drive is harmless, and doesn’t reveal anything about you. If there are just a few files that you know you don’t want someone else to see, then the easiest way to get rid of them is a built-in Linux utility called shred. Open a terminal window by clicking on Applications at the top-left of the screen, then expanding the Accessories menu and clicking on Terminal. Navigate to the file that you want to delete using cd to change directories and ls to list the files and folders in the current directory. As an example, we’ve got a file called BankInfo.txt on a Windows NTFS-formatted hard drive. We want to delete it securely, so we’ll call shred by entering the following in the terminal window: shred <file> which is, in our example: shred BankInfo.txt Notice that our BankInfo.txt file still exists, even though we’ve shredded it. A quick look at the contents of BankInfo.txt make it obvious that the file has indeed been securely overwritten. We can use some command-line arguments to make shred delete the file from the hard drive as well. We can also be extra-careful about the shredding process by upping the number of times shred overwrites the original file. To do this, in the terminal, type in: shred –remove –iterations=<num> <file> By default, shred overwrites the file 25 times. We’ll double this, giving us the following command: shred –remove –iterations=50 BankInfo.txt BankInfo.txt has now been securely wiped on the physical disk, and also no longer shows up in the directory listing. Repeat this process for any sensitive files on your hard drive! Wipe entire hard drives If you’re disposing of an old hard drive, or giving it to someone else, then you might instead want to wipe your entire hard drive. shred can be invoked on hard drives, but on modern file systems, the shred process may be reversible. We’ll use the program wipe to securely delete all of the data on a hard drive. Unlike shred, wipe is not included in Ubuntu by default, so we have to install it. Open up the Synaptic Package Manager by clicking on System in the top-left corner of the screen, then expanding the Administration folder and clicking on Synaptic Package Manager. wipe is part of the Universe repository, which is not enabled by default. We’ll enable it by clicking on Settings > Repositories in the Synaptic Package Manager window. Check the checkbox next to “Community-maintained Open Source software (universe)”. Click Close. You’ll need to reload Synaptic’s package list. Click on the Reload button in the main Synaptic Package Manager window. Once the package list has been reloaded, the text over the search field will change to “Rebuilding search index”. Wait until it reads “Quick search,” and then type “wipe” into the search field. The wipe package should come up, along with some other packages that perform similar functions. Click on the checkbox to the left of the label “wipe” and select “Mark for Installation”. Click on the Apply button to start the installation process. Click the Apply button on the Summary window that pops up. Once the installation is done, click the Close button and close the Synaptic Package Manager window. Open a terminal window by clicking on Applications in the top-left of the screen, then Accessories > Terminal. You need to figure our the correct hard drive to wipe. If you wipe the wrong hard drive, that data will not be recoverable, so exercise caution! In the terminal window, type in: sudo fdisk -l A list of your hard drives will show up. A few factors will help you identify the right hard drive. One is the file system, found in the System column of  the list – Windows hard drives are usually formatted as NTFS (which shows up as HPFS/NTFS). Another good identifier is the size of the hard drive, which appears after its identifier (highlighted in the following screenshot). In our case, the hard drive we want to wipe is only around 1 GB large, and is formatted as NTFS. We make a note of the label found under the the Device column heading. If you have multiple partitions on this hard drive, then there will be more than one device in this list. The wipe developers recommend wiping each partition separately. To start the wiping process, type the following into the terminal: sudo wipe <device label> In our case, this is: sudo wipe /dev/sda1 Again, exercise caution – this is the point of no return! Your hard drive will be completely wiped. It may take some time to complete, depending on the size of the drive you’re wiping. Conclusion If you have sensitive information on your hard drive – and chances are you probably do – then it’s a good idea to securely delete sensitive files before you give away or dispose of your hard drive. The most secure way to delete your data is with a few swings of a hammer, but shred and wipe from a Ubuntu Live CD is a good alternative! Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDScan a Windows PC for Viruses from a Ubuntu Live CDRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu 9.10 USB Flash DriveCreate a Bootable Ubuntu USB Flash Drive the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 Product Guides Google Maps Place marks – Pizza, Guns or Strip Clubs Monitor Applications With Kiwi LocPDF is a Visual PDF Search Tool Download Free iPad Wallpapers at iPad Decor Get Your Delicious Bookmarks In Firefox’s Awesome Bar

  Read the article

• Dynamic Types and DynamicObject References in C#

  - by Rick Strahl

  I've been working a bit with C# custom dynamic types for several customers recently and I've seen some confusion in understanding how dynamic types are referenced. This discussion specifically centers around types that implement IDynamicMetaObjectProvider or subclass from DynamicObject as opposed to arbitrary type casts of standard .NET types. IDynamicMetaObjectProvider types  are treated special when they are cast to the dynamic type. Assume for a second that I've created my own implementation of a custom dynamic type called DynamicFoo which is about as simple of a dynamic class that I can think of:public class DynamicFoo : DynamicObject { Dictionary<string, object> properties = new Dictionary<string, object>(); public string Bar { get; set; } public DateTime Entered { get; set; } public override bool TryGetMember(GetMemberBinder binder, out object result) { result = null; if (!properties.ContainsKey(binder.Name)) return false; result = properties[binder.Name]; return true; } public override bool TrySetMember(SetMemberBinder binder, object value) { properties[binder.Name] = value; return true; } } This class has an internal dictionary member and I'm exposing this dictionary member through a dynamic by implementing DynamicObject. This implementation exposes the properties dictionary so the dictionary keys can be referenced like properties (foo.NewProperty = "Cool!"). I override TryGetMember() and TrySetMember() which are fired at runtime every time you access a 'property' on a dynamic instance of this DynamicFoo type. Strong Typing and Dynamic Casting I now can instantiate and use DynamicFoo in a couple of different ways: Strong TypingDynamicFoo fooExplicit = new DynamicFoo(); var fooVar = new DynamicFoo(); These two commands are essentially identical and use strong typing. The compiler generates identical code for both of them. The var statement is merely a compiler directive to infer the type of fooVar at compile time and so the type of fooExplicit is DynamicFoo, just like fooExplicit. This is very static - nothing dynamic about it - and it completely ignores the IDynamicMetaObjectProvider implementation of my class above as it's never used. Using either of these I can access the native properties:DynamicFoo fooExplicit = new DynamicFoo();// static typing assignmentsfooVar.Bar = "Barred!"; fooExplicit.Entered = DateTime.Now; // echo back static values Console.WriteLine(fooVar.Bar); Console.WriteLine(fooExplicit.Entered); but I have no access whatsoever to the properties dictionary. Basically this creates a strongly typed instance of the type with access only to the strongly typed interface. You get no dynamic behavior at all. The IDynamicMetaObjectProvider features don't kick in until you cast the type to dynamic. If I try to access a non-existing property on fooExplicit I get a compilation error that tells me that the property doesn't exist. Again, it's clearly and utterly non-dynamic. Dynamicdynamic fooDynamic = new DynamicFoo(); fooDynamic on the other hand is created as a dynamic type and it's a completely different beast. I can also create a dynamic by simply casting any type to dynamic like this:DynamicFoo fooExplicit = new DynamicFoo(); dynamic fooDynamic = fooExplicit; Note that dynamic typically doesn't require an explicit cast as the compiler automatically performs the cast so there's no need to use as dynamic. Dynamic functionality works at runtime and allows for the dynamic wrapper to look up and call members dynamically. A dynamic type will look for members to access or call in two places: Using the strongly typed members of the object Using theIDynamicMetaObjectProvider Interface methods to access members So rather than statically linking and calling a method or retrieving a property, the dynamic type looks up - at runtime  - where the value actually comes from. It's essentially late-binding which allows runtime determination what action to take when a member is accessed at runtime *if* the member you are accessing does not exist on the object. Class members are checked first before IDynamicMetaObjectProvider interface methods are kick in. All of the following works with the dynamic type:dynamic fooDynamic = new DynamicFoo(); // dynamic typing assignments fooDynamic.NewProperty = "Something new!"; fooDynamic.LastAccess = DateTime.Now; // dynamic assigning static properties fooDynamic.Bar = "dynamic barred"; fooDynamic.Entered = DateTime.Now; // echo back dynamic values Console.WriteLine(fooDynamic.NewProperty); Console.WriteLine(fooDynamic.LastAccess); Console.WriteLine(fooDynamic.Bar); Console.WriteLine(fooDynamic.Entered); The dynamic type can access the native class properties (Bar and Entered) and create and read new ones (NewProperty,LastAccess) all using a single type instance which is pretty cool. As you can see it's pretty easy to create an extensible type this way that can dynamically add members at runtime dynamically. The Alter Ego of IDynamicObject The key point here is that all three statements - explicit, var and dynamic - declare a new DynamicFoo(), but the dynamic declaration results in completely different behavior than the first two simply because the type has been cast to dynamic. Dynamic binding means that the type loses its typical strong typing, compile time features. You can see this easily in the Visual Studio code editor. As soon as you assign a value to a dynamic you lose Intellisense and you see which means there's no Intellisense and no compiler type checking on any members you apply to this instance. If you're new to the dynamic type it might seem really confusing that a single type can behave differently depending on how it is cast, but that's exactly what happens when you use a type that implements IDynamicMetaObjectProvider. Declare the type as its strong type name and you only get to access the native instance members of the type. Declare or cast it to dynamic and you get dynamic behavior which accesses native members plus it uses IDynamicMetaObjectProvider implementation to handle any missing member definitions by running custom code. You can easily cast objects back and forth between dynamic and the original type:dynamic fooDynamic = new DynamicFoo(); fooDynamic.NewProperty = "New Property Value"; DynamicFoo foo = fooDynamic; foo.Bar = "Barred"; Here the code starts out with a dynamic cast and a dynamic assignment. The code then casts back the value to the DynamicFoo. Notice that when casting from dynamic to DynamicFoo and back we typically do not have to specify the cast explicitly - the compiler can induce the type so I don't need to specify as dynamic or as DynamicFoo. Moral of the Story This easy interchange between dynamic and the underlying type is actually super useful, because it allows you to create extensible objects that can expose non-member data stores and expose them as an object interface. You can create an object that hosts a number of strongly typed properties and then cast the object to dynamic and add additional dynamic properties to the same type at runtime. You can easily switch back and forth between the strongly typed instance to access the well-known strongly typed properties and to dynamic for the dynamic properties added at runtime. Keep in mind that dynamic object access has quite a bit of overhead and is definitely slower than strongly typed binding, so if you're accessing the strongly typed parts of your objects you definitely want to use a strongly typed reference. Reserve dynamic for the dynamic members to optimize your code. The real beauty of dynamic is that with very little effort you can build expandable objects or objects that expose different data stores to an object interface. I'll have more on this in my next post when I create a customized and extensible Expando object based on DynamicObject.© Rick Strahl, West Wind Technologies, 2005-2012Posted in CSharp  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Analytic functions – they’re not aggregates

  - by Rob Farley

  SQL 2012 brings us a bunch of new analytic functions, together with enhancements to the OVER clause. People who have known me over the years will remember that I’m a big fan of the OVER clause and the types of things that it brings us when applied to aggregate functions, as well as the ranking functions that it enables. The OVER clause was introduced in SQL Server 2005, and remained frustratingly unchanged until SQL Server 2012. This post is going to look at a particular aspect of the analytic functions though (not the enhancements to the OVER clause). When I give presentations about the analytic functions around Australia as part of the tour of SQL Saturdays (starting in Brisbane this Thursday), and in Chicago next month, I’ll make sure it’s sufficiently well described. But for this post – I’m going to skip that and assume you get it. The analytic functions introduced in SQL 2012 seem to come in pairs – FIRST_VALUE and LAST_VALUE, LAG and LEAD, CUME_DIST and PERCENT_RANK, PERCENTILE_CONT and PERCENTILE_DISC. Perhaps frustratingly, they take slightly different forms as well. The ones I want to look at now are FIRST_VALUE and LAST_VALUE, and PERCENTILE_CONT and PERCENTILE_DISC. The reason I’m pulling this ones out is that they always produce the same result within their partitions (if you’re applying them to the whole partition). Consider the following query: SELECT     YEAR(OrderDate),     FIRST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING),     LAST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING),     PERCENTILE_CONT(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)),     PERCENTILE_DISC(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; This is designed to get the TotalDue for the first order of the year, the last order of the year, and also the 95% percentile, using both the continuous and discrete methods (‘discrete’ means it picks the closest one from the values available – ‘continuous’ means it will happily use something between, similar to what you would do for a traditional median of four values). I’m sure you can imagine the results – a different value for each field, but within each year, all the rows the same. Notice that I’m not grouping by the year. Nor am I filtering. This query gives us a result for every row in the SalesOrderHeader table – 31465 in this case (using the original AdventureWorks that dates back to the SQL 2005 days). The RANGE BETWEEN bit in FIRST_VALUE and LAST_VALUE is needed to make sure that we’re considering all the rows available. If we don’t specify that, it assumes we only mean “RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW”, which means that LAST_VALUE ends up being the row we’re looking at. At this point you might think about other environments such as Access or Reporting Services, and remember aggregate functions like FIRST. We really should be able to do something like: SELECT     YEAR(OrderDate),     FIRST_VALUE(TotalDue)         OVER (PARTITION BY YEAR(OrderDate)               ORDER BY OrderDate, SalesOrderID               RANGE BETWEEN UNBOUNDED PRECEDING                         AND UNBOUNDED FOLLOWING) FROM Sales.SalesOrderHeader GROUP BY YEAR(OrderDate) ; But you can’t. You get that age-old error: Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.OrderDate' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Msg 8120, Level 16, State 1, Line 5 Column 'Sales.SalesOrderHeader.SalesOrderID' is invalid in the select list because it is not contained in either an aggregate function or the GROUP BY clause. Hmm. You see, FIRST_VALUE isn’t an aggregate function. None of these analytic functions are. There are too many things involved for SQL to realise that the values produced might be identical within the group. Furthermore, you can’t even surround it in a MAX. Then you get a different error, telling you that you can’t use windowed functions in the context of an aggregate. And so we end up grouping by doing a DISTINCT. SELECT DISTINCT     YEAR(OrderDate),         FIRST_VALUE(TotalDue)              OVER (PARTITION BY YEAR(OrderDate)                   ORDER BY OrderDate, SalesOrderID                   RANGE BETWEEN UNBOUNDED PRECEDING                             AND UNBOUNDED FOLLOWING),         LAST_VALUE(TotalDue)             OVER (PARTITION BY YEAR(OrderDate)                   ORDER BY OrderDate, SalesOrderID                   RANGE BETWEEN UNBOUNDED PRECEDING                             AND UNBOUNDED FOLLOWING),     PERCENTILE_CONT(0.95)          WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)),     PERCENTILE_DISC(0.95)         WITHIN GROUP (ORDER BY TotalDue)         OVER (PARTITION BY YEAR(OrderDate)) FROM Sales.SalesOrderHeader ; I’m sorry. It’s just the way it goes. Hopefully it’ll change the future, but for now, it’s what you’ll have to do. If we look in the execution plan, we see that it’s incredibly ugly, and actually works out the results of these analytic functions for all 31465 rows, finally performing the distinct operation to convert it into the four rows we get in the results. You might be able to achieve a better plan using things like TOP, or the kind of calculation that I used in http://sqlblog.com/blogs/rob_farley/archive/2011/08/23/t-sql-thoughts-about-the-95th-percentile.aspx (which is how PERCENTILE_CONT works), but it’s definitely convenient to use these functions, and in time, I’m sure we’ll see good improvements in the way that they are implemented. Oh, and this post should be good for fellow SQL Server MVP Nigel Sammy’s T-SQL Tuesday this month.

  Read the article

• SQL Azure Reporting Limited CTP Arrived

  - by Shaun

  It’s about 3 months later when I registered the SQL Azure Reporting CTP on the Microsoft Connect after TechED 2010 China. Today when I checked my mailbox I found that the SQL Azure team had just accepted my request and sent the activation code over to me. So let’s have a look on the new SQL Azure Reporting.   Concept The SQL Azure Reporting provides cloud-based reporting as a service, built on SQL Server Reporting Services and SQL Azure technologies. Cloud-based reporting solutions such as SQL Azure Reporting provide many benefits, including rapid provisioning, cost-effective scalability, high availability, and reduced management overhead for report servers; and secure access, viewing, and management of reports. By using the SQL Azure Reporting service, we can do: Embed the Visual Studio Report Viewer ADO.NET Ajax control or Windows Form control to view the reports deployed on SQL Azure Reporting Service in our web or desktop application. Leverage the SQL Azure Reporting SOAP API to manage and retrieve the report content from any kinds of application. Use the SQL Azure Reporting Service Portal to navigate and view the reports deployed on the cloud. Since the SQL Azure Reporting was built based on the SQL Server 2008 R2 Reporting Service, we can use any tools we are familiar with, such as the SQL Server Integration Studio, Visual Studio Report Viewer. The SQL Azure Reporting Service runs as a remote SQL Server Reporting Service just on the cloud rather than on a server besides us.   Establish a New SQL Azure Reporting Let’s move to the windows azure deveploer portal and click the Reporting item from the left side navigation bar. If you don’t have the activation code you can click the Sign Up button to send a requirement to the Microsoft Connect. Since I already recieved the received code mail I clicked the Provision button. Then after agree the terms of the service I will select the subscription for where my SQL Azure Reporting CTP should be provisioned. In this case I selected my free Windows Azure Pass subscription. Then the final step, paste the activation code and enter the password of our SQL Azure Reporting Service. The user name of the SQL Azure Reporting will be generated by SQL Azure automatically. After a while the new SQL Azure Reporting Server will be shown on our developer portal. The Reporting Service URL and the user name will be shown as well. We can reset the password from the toolbar button.   Deploy Report to SQL Azure Reporting If you are familiar with SQL Server Reporting Service you will find this part will be very similar with what you know and what you did before. Firstly we open the SQL Server Business Intelligence Development Studio and create a new Report Server Project. Then we will create a shared data source where the report data will be retrieved from. This data source can be SQL Azure but we can use local SQL Server or other database if it opens the port up. In this case we use a SQL Azure database located in the same data center of our reporting service. In the Credentials tab page we entered the user name and password to this SQL Azure database. The SQL Azure Reporting CTP only available at the North US Data Center now so that the related SQL Server and hosted service might be better to select the same data center to avoid the external data transfer fee. Then we create a very simple report, just retrieve all records from a table named Members and have a table in the report to list them. In the data source selection step we choose the shared data source we created before, then enter the T-SQL to select all records from the Member table, then put all fields into the table columns. The report will be like this as following In order to deploy the report onto the SQL Azure Reporting Service we need to update the project property. Right click the project node from the solution explorer and select the property item. In the Target Server URL item we will specify the reporting server URL of our SQL Azure Reporting. We can go back to the developer portal and select the reporting node from the left side, then copy the Web Service URL and paste here. But notice that we need to append “/reportserver” after pasted. Then just click the Deploy menu item in the context menu of the project, the Visual Studio will compile the report and then upload to the reporting service accordingly. In this step we will be prompted to input the user name and password of our SQL Azure Reporting Service. We can get the user name from the developer portal, just next to the Web Service URL in the SQL Azure Reporting page. And the password is the one we specified when created the reporting service. After about one minute the report will be deployed succeed.   View the Report in Browser SQL Azure Reporting allows us to view the reports which deployed on the cloud from a standard browser. We copied the Web Service URL from the reporting service main page and appended “/reportserver” in HTTPS protocol then we will have the SQL Azure Reporting Service login page. After entered the user name and password of the SQL Azure Reporting Service we can see the directories and reports listed. Click the report will launch the Report Viewer to render the report.   View Report in a Web Role with the Report Viewer The ASP.NET and Windows Form Report Viewer works well with the SQL Azure Reporting Service as well. We can create a ASP.NET Web Role and added the Report Viewer control in the default page. What we need to change to the report viewer are Change the Processing Mode to Remote. Specify the Report Server URL under the Server Remote category to the URL of the SQL Azure Reporting Web Service URL with “/reportserver” appended. Specify the Report Path to the report which we want to display. The report name should NOT include the extension name. For example my report was in the SqlAzureReportingTest project and named MemberList.rdl then the report path should be /SqlAzureReportingTest/MemberList. And the next one is to specify the SQL Azure Reporting Credentials. We can use the following class to wrap the report server credential. 1: private class ReportServerCredentials : IReportServerCredentials 2: { 3: private string _userName; 4: private string _password; 5: private string _domain; 6:  7: public ReportServerCredentials(string userName, string password, string domain) 8: { 9: _userName = userName; 10: _password = password; 11: _domain = domain; 12: } 13:  14: public WindowsIdentity ImpersonationUser 15: { 16: get 17: { 18: return null; 19: } 20: } 21:  22: public ICredentials NetworkCredentials 23: { 24: get 25: { 26: return null; 27: } 28: } 29:  30: public bool GetFormsCredentials(out Cookie authCookie, out string user, out string password, out string authority) 31: { 32: authCookie = null; 33: user = _userName; 34: password = _password; 35: authority = _domain; 36: return true; 37: } 38: } And then in the Page_Load method, pass it to the report viewer. 1: protected void Page_Load(object sender, EventArgs e) 2: { 3: ReportViewer1.ServerReport.ReportServerCredentials = new ReportServerCredentials( 4: "<user name>", 5: "<password>", 6: "<sql azure reporting web service url>"); 7: } Finally deploy it to Windows Azure and enjoy the report.   Summary In this post I introduced the SQL Azure Reporting CTP which had just available. Likes other features in Windows Azure, the SQL Azure Reporting is very similar with the SQL Server Reporting. As you can see in this post we can use the existing and familiar tools to build and deploy the reports and display them on a website. But the SQL Azure Reporting is just in the CTP stage which means It is free. There’s no support for it. Only available at the North US Data Center. You can get more information about the SQL Azure Reporting CTP from the links following SQL Azure Reporting Limited CTP at MSDN SQL Azure Reporting Samples at TechNet Wiki You can download the solutions and the projects used in this post here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Getting Started with ASP.NET Membership, Profile and RoleManager

  - by Ben Griswold

  A new ASP.NET MVC project includes preconfigured Membership, Profile and RoleManager providers right out of the box.  Try it yourself – create a ASP.NET MVC application, crack open the web.config file and have a look.  First, you’ll find the ApplicationServices database connection: <connectionStrings>   <add name="ApplicationServices"        connectionString="data source=.\SQLEXPRESS;Integrated Security=SSPI;AttachDBFilename=|DataDirectory|aspnetdb.mdf;User Instance=true"        providerName="System.Data.SqlClient"/> </connectionStrings>   Notice the connection string is referencing the aspnetdb.mdf database hosted by SQL Express and it’s using integrated security so it’ll just work for you without having to call out a specific database login or anything. Scroll down the file a bit and you’ll find each of the three noted sections: <membership>   <providers>     <clear/>     <add name="AspNetSqlMembershipProvider"          type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"          connectionStringName="ApplicationServices"          enablePasswordRetrieval="false"          enablePasswordReset="true"          requiresQuestionAndAnswer="false"          requiresUniqueEmail="false"          passwordFormat="Hashed"          maxInvalidPasswordAttempts="5"          minRequiredPasswordLength="6"          minRequiredNonalphanumericCharacters="0"          passwordAttemptWindow="10"          passwordStrengthRegularExpression=""          applicationName="/"             />   </providers> </membership>   <profile>   <providers>     <clear/>     <add name="AspNetSqlProfileProvider"          type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"          connectionStringName="ApplicationServices"          applicationName="/"             />   </providers> </profile>   <roleManager enabled="false">   <providers>     <clear />     <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />     <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />   </providers> </roleManager> Really. It’s all there. Still don’t believe me.  Run the application, walk through the registration process and finally login and logout.  Completely functional – and you didn’t have to do a thing! What else?  Well, you can manage your users via the Configuration Manager which is hiding in Visual Studio behind Projects > ASP.NET Configuration. The ASP.NET Web Site Administration Tool isn’t MVC-specific (neither is the Membership, Profile or RoleManager stuff) but it’s neat and I hardly ever see anyone using it.  Here you can set up and edit users, roles, and set access permissions for your site. You can manage application settings, establish your SMTP settings, configure debugging and tracing, define default error page and even take your application offline.  The UI is rather plain-Jane but it works great. And here’s the best of all.  Let’s say you, like most of us, don’t want to run your application on top of the aspnetdb.mdf database.  Let’s suppose you want to use your own database and you’d like to add the membership stuff to it.  Well, that’s easy enough. Take a look inside your [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\ folder.  Here you’ll find a bunch of files.  If you were to run the InstallCommon.sql, InstallMembership.sql, InstallRoles.sql and InstallProfile.sql files against the database of your choices, you’d be installing the same membership, profile and role artifacts which are found in the aspnet.db to your own database.  Too much trouble?  Okay. Run [drive:]\%windir%\Microsoft.Net\Framework\v2.0.50727\aspnet_regsql.exe from the command line instead.  This will launch the ASP.NET SQL Server Setup Wizard which walks you through the installation of those same database objects into the new or existing database of your choice. You may not always have the luxury of using this tool on your destination server, but you should use it whenever you can.  Last tip: don’t forget to update the ApplicationServices connectionstring to point to your custom database after the setup is complete. At the risk of sounding like a smarty, everything I’ve mentioned in this post has been around for quite a while. The thing is that not everyone has had the opportunity to use it.  And it makes sense. I know I’ve worked on projects which used custom membership services.  Why bother with the out-of-the-box stuff, right?   And the .NET framework is so massive, who can know it all. Well, eventually you might have a chance to architect your own solution using any implementation you’d like or you will have the time to play around with another aspect of the framework.  When you do, think back to this post.

  Read the article

• Remote Desktop to Your Azure Virtual Machine

  - by Shaun

  The Windows Azure Team had just published their new development portal this week and the SDK 1.3. Within this new release there are a lot of cool feature available. The one I’m looking forward to is Remote Desktop Access to your running Windows Azure Virtual Machine.   Configuration Remote Desktop Access It would be very simple to make the azure service enable the remote desktop access. First of all let’s create a new windows azure project from the Visual Studio. In this example I just created a normal MVC 2 web role without any modifications. Then we right-click the azure project node in the solution explorer window and select “Publish”. Then let’s select the “Deploy your Windows Azure project to Windows Azure” on the top radio button. And then select the credential, deployment service/slot, storage and label as susal. You must have the Management API Certificates uploaded to your Windows Azure account, and install the certification on you machine before in order to use this one-click deployment feature. If you are familiar with this dialog you will notice that there’s a linkage named “Configure Remote Desktop connections”. Here is where you need to make this service enable the remote desktop feature. After clicked this link we will set the configuration of the remote desktop access authorization information. There are 4 steps we need to do to configure our access. Certificates: We need either create or select a certificate file in order to encypt the access cerdenticals. In this example I will use the certificate file for my Management API. Username: The remote desktop user name to access the virtual machine. Password: The password for the access. Expiration: The access cerdentals would be expired after 1 month by default but we can amend here. After that we clicked the OK button to back to the publish dialog.   The next step is to back to the new windows azure portal and navigate to the hosted services list. I created a new hosted service and upload the certificate file onto this service. The user name and password access to the azure machine must be encrypted from the local machine, and then send to the windows azure platform, then decrypted on the azure side by the same file. This is why we need to upload the certificate file onto azure. We navigated to the “Hosted Services, Storage Accounts & CDN"” from the left panel and created a new hosted service named “SDK13” and selected the “Certificates” node. Then we clicked the “Add Certificates” button. Then we select the local certificate file and the password to install it into this azure service.   The final step would be back to our Visual Studio and in the pulish dialog just click the OK button. The Visual Studio will upload our package and the configuration into our service with the remote desktop settings.   Remote Desktop Access to Azure Virtual Machine All things had been done, let’s have a look back on the Windows Azure Development Portal. If I selected the web role that I had just published we can see on the toolbar there’s a section named “Remote Access”. In this section the Enable checkbox had been checked which means this role has the Remote Desktop Access feature enabled. If we want to modify the access cerdentals we can simply click the Configure button. Then we can update the user name, password, certificates and the expiration date.   Let’s select the instance node under the web role. In this case I just created one instance for demo. We can see that when we selected the instance node, the Connect button turned enabled. After clicked this button there will be a RDP file downloaded. This is a Remote Desctop configuration file that we can use to access to our azure virtual machine. Let’s download it to our local machine and execute. We input the user name and password we specified when we published our application to azure and then click OK. There might be some certificates warning dislog appeared. This is because the certificates we use to encryption is not signed by a trusted provider. Just select OK in these cases as we know the certificate is safty to us. Finally, the virtual machine of Windows Azure appeared.   A Quick Look into the Azure Virtual Machine Let’s just have a very quick look into our virtual machine. There are 3 disks available for us: C, D and E. Disk C: Store the local resource, diagnosis information, etc. Disk D: System disk which contains the OS, IIS, .NET Frameworks, etc. Disk E: Sotre our application code. The IIS which hosting our webiste on Azure. The IP configuration of the azure virtual machine.   Summary In this post I covered one of the new feature of the Azure SDK 1.3 – Remote Desktop Access. We can set the access per service and all of the instances of this service could be accessed through the remote desktop tool. With this feature we can deep into the virtual machines of our instances to see the inner information such as the system event, IIS log, system information, etc. But we should pay attention to modify the system settings. 2 reasons from what I know for now: 1. If we have more than one instances against our service we should ensure that all system settings we modifed are applied to all instances/virtual machines. Otherwise, as the machines are under the azure load balance proxy our application process may doesn’t work due to the defferent settings between the instances. 2. When the virtual machine encounted some problem and need to be translated to another physical machine all settings we made would be disappeared.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Problem in starting Rails server [on hold]

  - by Ahsan Rony

  when I start rails s I get the following error: C:\Sites\ticketee>rails s => Booting WEBrick => Rails 4.1.4 application starting in development on http:/0.0.0.0:3000 => Run `rails server -h` for more startup options => Notice: server is listening on all interfaces (0.0.0.0). Consider using 127.0 .0.1 (--binding option) => Ctrl-C to shutdown server Exiting C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport-4.1.4/lib/act ive_support/dependencies.rb:247:in `require': cannot load such file -- treetop/r untime (LoadError) from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `block in require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:232:in `load_dependency' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/mail-2.5.4/lib /load_parsers.rb:7:in `<module:Mail>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/mail-2.5.4/lib /load_parsers.rb:6:in `<top (required)>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `block in require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:232:in `load_dependency' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/mail-2.5.4/lib /mail.rb:79:in `<module:Mail>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/mail-2.5.4/lib /mail.rb:2:in `<top (required)>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `block in require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:232:in `load_dependency' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/dependencies.rb:247:in `require' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/actionmailer-4 .1.4/lib/action_mailer/base.rb:1:in `<top (required)>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/actionmailer-4 .1.4/lib/action_mailer/railtie.rb:49:in `block in <class:Railtie>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/lazy_load_hooks.rb:36:in `call' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/lazy_load_hooks.rb:36:in `execute_hook' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/lazy_load_hooks.rb:45:in `block in run_load_hooks' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/lazy_load_hooks.rb:44:in `each' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/activesupport- 4.1.4/lib/active_support/lazy_load_hooks.rb:44:in `run_load_hooks' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/application/finisher.rb:64:in `block in <module:Finisher>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/initializable.rb:30:in `instance_exec' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/initializable.rb:30:in `run' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/initializable.rb:55:in `block in run_initializers' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:150:in `block i n tsort_each' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:183:in `block ( 2 levels) in each_strongly_connected_component' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:219:in `each_st rongly_connected_component_from' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:182:in `block i n each_strongly_connected_component' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:180:in `each' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:180:in `each_st rongly_connected_component' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/2.0.0/tsort.rb:148:in `tsort_e ach' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/initializable.rb:54:in `run_initializers' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/application.rb:300:in `initialize!' from C:/Sites/ticketee/config/environment.rb:5:in `<top (required)>' from C:/Sites/ticketee/config.ru:3:in `require' from C:/Sites/ticketee/config.ru:3:in `block in <main>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/builder.rb:55:in `instance_eval' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/builder.rb:55:in `initialize' from C:/Sites/ticketee/config.ru:in `new' from C:/Sites/ticketee/config.ru:in `<main>' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/builder.rb:49:in `eval' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/builder.rb:49:in `new_from_string' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/builder.rb:40:in `parse_file' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/server.rb:277:in `build_app_and_options_from_config' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/server.rb:199:in `app' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/server.rb:50:in `app' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/rack-1.5.2/lib /rack/server.rb:314:in `wrapped_app' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/server.rb:130:in `log_to_stdout' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/server.rb:67:in `start' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/commands_tasks.rb:81:in `block in server' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/commands_tasks.rb:76:in `tap' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/commands_tasks.rb:76:in `server' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands/commands_tasks.rb:40:in `run_command!' from C:/RailsInstaller/Ruby2.0.0/lib/ruby/gems/2.0.0/gems/railties-4.1.4 /lib/rails/commands.rb:17:in `<top (required)>' from bin/rails:4:in `require' from bin/rails:4:in `<main>' C:\Sites\ticketee> it exit automatically exits though I don't press Cntr+C Can anyone help me to fix this problem

  Read the article

• Xobni Free Powers Up Outlook’s Search and Contacts

  - by Matthew Guay

  Want to find out more about your contacts, discover email trends, and even sync Yahoo! email accounts in Outlook?  Here’s how you can do this and more with Xobni Free. Email is one of the most important communications mediums today, but even with all of the advances in Outlook over the years it can still be difficult to keep track of conversations, files, and contacts.  Xobni makes it easy by indexing your emails and organizing them by sender.  You can use its powerful search to quickly find any email, find related messages, and then view more information about that contact with information from social networks.  And, to top it off, it even lets you view your Yahoo! emails directly in Outlook without upgrading to a Yahoo! Plus account.  Xobni runs in Outlook 2003, 2007, and 2010, including the 64 bit version of Outlook 2010, and users of older versions will especially enjoy the new features Xobni brings for free. Getting started Download the Xobni Free installer (link below), and run to start the installation.  Make sure to exit Outlook before installing.  Xobni may need to download additional files which may take a few moments. When the download is finished, proceed with the install as normal.  You can opt out of the Product Improvement Program at the end of the installation by unchecking the box.  Additionally, you are asked to share Xobni with your friends on social networks, but this is not required.   Next time you open Outlook, you’ll notice the new Xobni sidebar in Outlook.  You can choose to watch an introduction video that will help you quickly get up to speed on how Xobni works. While this is playing, Xobni is working at indexing your email in the background.  Once the first indexing is finished, click Let’s Go! to start using Xobni. Here’s how Xobni looks in Outlook 2010: Advanced Email Information Select an email, and now you can see lots of info about it in your new Xobni sidebar.   On the top of the sidebar, select the graph icon to see when and how often you email with a contact.  Each contact is given an Xobni rank so you can quickly see who you email the most.   You can see all related emails sorted into conversations, and also all attachments in the conversation, not just this email. Xobni can also show you all scheduled appointments and links exchanged with a contact, but this is only available in the Plus version.  If you’d rather not see the tab for a feature you can’t use, click Don’t show this tab to banish it from Xobni for good.   Searching emails from the Xobni toolbar is very fast, and you can preview a message by simply hovering over it from the search pane. Get More Information About Your Contacts Xobni’s coolest feature is its social integration.  Whenever you select an email, you may see a brief bio, picture, and more, all pulled from social networks.   Select one of the tabs to find more information.  You may need to login to view information on your contacts from certain networks. The Twitter tab lets you see recent tweets.  Xobni will search for related Twitter accounts, and will ask you to confirm if the choice is correct.   Now you can see this contact’s recent Tweets directly from Outlook.   The Hoovers tab can give you interesting information about the businesses you’re in contact with. If the information isn’t correct, you can edit it and add your own information.  Click the Edit button, and the add any information you want.   You can also remove a network you don’t wish to see.  Right-click on the network tabs, select Manage Extensions, and uncheck any you don’t want to see. But sometimes online contact just doesn’t cut it.  For these times, click on the orange folder button to request a contact’s phone number or schedule a time with them. This will open a new email message ready to send with the information you want.  Edit as you please, and send. Add Yahoo! Email to Outlook for Free One of Xobni’s neatest features is that it let’s you add your Yahoo! email account to Outlook for free.  Click the gear icon in the bottom of the Xobni sidebar and select Options to set it up. Select the Integration tab, and click Enable to add Yahoo! mail to Xobni. Sign in with your Yahoo! account, and make sure to check the Keep me signed in box. Note that you may have to re-signin every two weeks to keep your Yahoo! account connected.  Select I agree to finish setting it up. Xobni will now download and index your recent Yahoo! mail. Your Yahoo! messages will only show up in the Xobni sidebar.  Whenever you select a contact, you will see related messages from your Yahoo! account as well.  Or, you can search from the sidebar to find individual messages from your Yahoo! account.  Note the Y! logo beside Yahoo! messages.   Select a message to read it in the Sidebar.  You can open the email in Yahoo! in your browser, or can reply to it using your default Outlook email account. If you have many older messages in your Yahoo! account, make sure to go back to the Integration tab and select Index Yahoo! Mail to index all of your emails. Conclusion Xobni is a great tool to help you get more out of your daily Outlook experience.  Whether you struggle to find attachments a coworker sent you or want to access Yahoo! email from Outlook, Xobni might be the perfect tool for you.  And with the extra things you learn about your contacts with the social network integration, you might boost your own PR skills without even trying! Link Download Xobni Similar Articles Productive Geek Tips Speed up Windows Vista Start Menu Search By Limiting ResultsFix for New Contact Group Button Not Displaying in VistaGet Maps and Directions to Your Contacts in Outlook 2007Backup Windows Mail Messages and Contacts in VistaHow to Import Gmail Contacts Into Outlook 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

  Read the article

• ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

  - by nmgomes

  The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this  post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that  could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control  theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control  Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services  like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters> <!-- Adapter for the WeblogPostCommentForm control in order to add the Captcha and prevent SPAM comments --> <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections> <!-- New section for Captcha providers configuration --> <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections> <!-- Configuring a simple Captcha provider --> <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute"> <!-- The Captcha Image handler used by the simple Captcha provider --> <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

  Read the article

• Class-Level Model Validation with EF Code First and ASP.NET MVC 3

  - by ScottGu

  Earlier this week the data team released the CTP5 build of the new Entity Framework Code-First library.  In my blog post a few days ago I talked about a few of the improvements introduced with the new CTP5 build.  Automatic support for enforcing DataAnnotation validation attributes on models was one of the improvements I discussed.  It provides a pretty easy way to enable property-level validation logic within your model layer. You can apply validation attributes like [Required], [Range], and [RegularExpression] – all of which are built-into .NET 4 – to your model classes in order to enforce that the model properties are valid before they are persisted to a database.  You can also create your own custom validation attributes (like this cool [CreditCard] validator) and have them be automatically enforced by EF Code First as well.  This provides a really easy way to validate property values on your models.  I showed some code samples of this in action in my previous post. Class-Level Model Validation using IValidatableObject DataAnnotation attributes provides an easy way to validate individual property values on your model classes.  Several people have asked - “Does EF Code First also support a way to implement class-level validation methods on model objects, for validation rules than need to span multiple property values?”  It does – and one easy way you can enable this is by implementing the IValidatableObject interface on your model classes. IValidatableObject.Validate() Method Below is an example of using the IValidatableObject interface (which is built-into .NET 4 within the System.ComponentModel.DataAnnotations namespace) to implement two custom validation rules on a Product model class.  The two rules ensure that: New units can’t be ordered if the Product is in a discontinued state New units can’t be ordered if there are already more than 100 units in stock We will enforce these business rules by implementing the IValidatableObject interface on our Product class, and by implementing its Validate() method like so: The IValidatableObject.Validate() method can apply validation rules that span across multiple properties, and can yield back multiple validation errors. Each ValidationResult returned can supply both an error message as well as an optional list of property names that caused the violation (which is useful when displaying error messages within UI). Automatic Validation Enforcement EF Code-First (starting with CTP5) now automatically invokes the Validate() method when a model object that implements the IValidatableObject interface is saved.  You do not need to write any code to cause this to happen – this support is now enabled by default. This new support means that the below code – which violates one of our above business rules – will automatically throw an exception (and abort the transaction) when we call the “SaveChanges()” method on our Northwind DbContext: In addition to reactively handling validation exceptions, EF Code First also allows you to proactively check for validation errors.  Starting with CTP5, you can call the “GetValidationErrors()” method on the DbContext base class to retrieve a list of validation errors within the model objects you are working with.  GetValidationErrors() will return a list of all validation errors – regardless of whether they are generated via DataAnnotation attributes or by an IValidatableObject.Validate() implementation.  Below is an example of proactively using the GetValidationErrors() method to check (and handle) errors before trying to call SaveChanges(): ASP.NET MVC 3 and IValidatableObject ASP.NET MVC 2 included support for automatically honoring and enforcing DataAnnotation attributes on model objects that are used with ASP.NET MVC’s model binding infrastructure.  ASP.NET MVC 3 goes further and also honors the IValidatableObject interface.  This combined support for model validation makes it easy to display appropriate error messages within forms when validation errors occur.  To see this in action, let’s consider a simple Create form that allows users to create a new Product: We can implement the above Create functionality using a ProductsController class that has two “Create” action methods like below: The first Create() method implements a version of the /Products/Create URL that handles HTTP-GET requests - and displays the HTML form to fill-out.  The second Create() method implements a version of the /Products/Create URL that handles HTTP-POST requests - and which takes the posted form data, ensures that is is valid, and if it is valid saves it in the database.  If there are validation issues it redisplays the form with the posted values.  The razor view template of our “Create” view (which renders the form) looks like below: One of the nice things about the above Controller + View implementation is that we did not write any validation logic within it.  The validation logic and business rules are instead implemented entirely within our model layer, and the ProductsController simply checks whether it is valid (by calling the ModelState.IsValid helper method) to determine whether to try and save the changes or redisplay the form with errors. The Html.ValidationMessageFor() helper method calls within our view simply display the error messages our Product model’s DataAnnotations and IValidatableObject.Validate() method returned.  We can see the above scenario in action by filling out invalid data within the form and attempting to submit it: Notice above how when we hit the “Create” button we got an error message.  This was because we ticked the “Discontinued” checkbox while also entering a value for the UnitsOnOrder (and so violated one of our business rules).  You might ask – how did ASP.NET MVC know to highlight and display the error message next to the UnitsOnOrder textbox?  It did this because ASP.NET MVC 3 now honors the IValidatableObject interface when performing model binding, and will retrieve the error messages from validation failures with it. The business rule within our Product model class indicated that the “UnitsOnOrder” property should be highlighted when the business rule we hit was violated: Our Html.ValidationMessageFor() helper method knew to display the business rule error message (next to the UnitsOnOrder edit box) because of the above property name hint we supplied: Keeping things DRY ASP.NET MVC and EF Code First enables you to keep your validation and business rules in one place (within your model layer), and avoid having it creep into your Controllers and Views.  Keeping the validation logic in the model layer helps ensure that you do not duplicate validation/business logic as you add more Controllers and Views to your application.  It allows you to quickly change your business rules/validation logic in one single place (within your model layer) – and have all controllers/views across your application immediately reflect it.  This help keep your application code clean and easily maintainable, and makes it much easier to evolve and update your application in the future. Summary EF Code First (starting with CTP5) now has built-in support for both DataAnnotations and the IValidatableObject interface.  This allows you to easily add validation and business rules to your models, and have EF automatically ensure that they are enforced anytime someone tries to persist changes of them to a database.  ASP.NET MVC 3 also now supports both DataAnnotations and IValidatableObject as well, which makes it even easier to use them with your EF Code First model layer – and then have the controllers/views within your web layer automatically honor and support them as well.  This makes it easy to build clean and highly maintainable applications. You don’t have to use DataAnnotations or IValidatableObject to perform your validation/business logic.  You can always roll your own custom validation architecture and/or use other more advanced validation frameworks/patterns if you want.  But for a lot of applications this built-in support will probably be sufficient – and provide a highly productive way to build solutions. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

  Read the article

• On Her Majesty's Secret Source Code: .NET Reflector 7 Early Access Builds Now Available

  - by Bart Read

  Dodgy Bond references aside, I'm extremely happy to be able to tell you that we've just released our first .NET Reflector 7 Early Access build. We're going to make these available over the coming weeks via the main .NET Reflector download page at: http://reflector.red-gate.com/Download.aspx Please have a play and tell us what you think in the forum we've set up. Also, please let us know if you run into any problems in the same place. The new version so far comes with numerous decompilation improvements including (after 5 years!) support for iterator blocks - i.e., the yield statement first seen in .NET 2.0. We've also done a lot of work to solidify the support for .NET 4.0. Clive's written about the work he's done to support iterator blocks in much more detail here, along with the odd problem he's encountered when dealing with compiler generated code: http://www.simple-talk.com/community/blogs/clivet/96199.aspx. On the UI front we've started what will ultimately be a rewrite of the entire front-end, albeit broken into stages over two or three major releases. The most obvious addition at the moment is tabbed browsing, which you can see in Figure 1. Figure 1. .NET Reflector's new tabbed decompilation feature. Use CTRL+Click on any item in the assembly browser tree, or any link in the source code view, to open it in a new tab. This isn't by any means finished. I'll be tying up loose ends for the next few weeks, with a major focus on performance and resource usage. .NET Reflector has historically been a largely single-threaded application which has been fine up until now but, as you might expect, the addition of browser-style tabbing has pushed this approach somewhat beyond its limit. You can see this if you refresh the assemblies list by hitting F5. This shows up another problem: we really need to make Reflector remember everything you had open before you refreshed the list, rather than just the last item you viewed - I discovered that it's always done the latter, but it used to hide all panes apart from the treeview after a Refresh, including the decompiler/disassembler window. Ultimately I've got plans to add the whole VS/Chrome/Firefox style ability to drag a tab into the middle of nowhere to spawn a new window, but I need to be mindful of the add-ins, amongst other things, so it's possible that might slip to a 7.5 or 8.0 release. You'll also notice that .NET Reflector 7 now needs .NET 3.5 or later to run. We made this jump because we wanted to offer ourselves a much better chance of adding some really cool functionality to support newer technologies, such as Silverlight and Windows Phone 7. We've also taken the opportunity to start using WPF for UI development, which has frankly been a godsend. The learning curve is practically vertical but, I kid you not, it's just a far better world. Really. Stop using WinForms. Now. Why are you still using it? I had to go back and work on an old WinForms dialog for an hour or two yesterday and it really made me wince. The point is we'll be able to move the UI in some exciting new directions that will make Reflector easier to use whilst continuing to develop its functionality without (and this is key) cluttering the interface. The 3.5 language enhancements should also enable us to be much more productive over the longer term. I know most of you have .NET Fx 3.5 or 4.0 already but, if you do need to install a new version, I'd recommend you jump straight to 4.0 because, for one thing, it's faster, and if you're starting afresh there's really no reason not to. Despite the Fx version jump the Visual Studio add-in should still work fine in Visual Studio 2005, and obviously will continue to work in Visual Studio 2008 and 2010. If you do run into problems, again, please let us know here. As before, we continue to support every edition of Visual Studio exception the Express Editions. Speaking of Visual Studio, we've also been improving the add-in. You can now open and explore decompiled code for any referenced assembly in any project in your solution. Just right-click on the reference, then click Decompile and Explore on the context menu. Reflector will pop up a progress box whilst it decompiles your assembly (Figure 2) - you can move this out of the way whilst you carry on working. Figure 2. Decompilation progress. This isn't modal so you can just move it out of the way and carry on working. Once it's done you can explore your assembly in the Reflector treeview (Figure 3), also accessible via the .NET Reflector Explore Decompiled Assemblies main menu item. Double-click on any item to open decompiled source in the Visual Studio source code view. Use right-click and Go To Definition on the source view context menu to navigate through the code. Figure 3. Using the .NET Reflector treeview within Visual Studio. Double-click on any item to open decompiled source in the source code view. There are loads of other changes and fixes that have gone in, often under the hood, which I don't have room to talk about here, and plenty more to come over the next few weeks. I'll try to keep you abreast of new functionality and changes as they go in. There are a couple of smaller things worth mentioning now though. Firstly, we've reorganised the menus and toolbar in Reflector itself to more closely mirror what you might be used to in other applications. Secondly, we've tried to make some of the functionality more discoverable. For example, you can now switch decompilation target framework version directly from the toolbar - and the default is now .NET 4.0. I think that about covers it for the moment. As I said, please use the new version, and send us your feedback. Here's that download URL again: http://reflector.red-gate.com/Download.aspx. Until next time! Technorati Tags: .net reflector,7,early access,new version,decompilation,tabbing,visual studio,software development,.net,c#,vb

  Read the article

• .NET 4.5 is an in-place replacement for .NET 4.0

  - by Rick Strahl

  With the betas for .NET 4.5 and Visual Studio 11 and Windows 8 shipping many people will be installing .NET 4.5 and hacking away on it. There are a number of great enhancements that are fairly transparent, but it's important to understand what .NET 4.5 actually is in terms of the CLR running on your machine. When .NET 4.5 is installed it effectively replaces .NET 4.0 on the machine. .NET 4.0 gets overwritten by a new version of .NET 4.5 which - according to Microsoft - is supposed to be 100% backwards compatible. While 100% backwards compatible sounds great, we all know that 100% is a hard number to hit, and even the aforementioned blog post at the Microsoft site acknowledges this. But there's so much more than backwards compatibility that makes this awkward at best and confusing at worst. What does ‘Replacement’ mean? When you install .NET 4.5 your .NET 4.0 assemblies in the \Windows\.NET Framework\V4.0.30319 are overwritten with a new set of assemblies. You end up with overwritten assemblies as well as a bunch of new ones (like the new System.Net.Http assemblies for example). The following screen shot demonstrates system.dll on my test machine (left) running .NET 4.5 on the right and my production laptop running stock .NET 4.0 (right):   Clearly they are different files with a difference in file sizes (interesting that the 4.5 version is actually smaller). That’s not all. If you actually query the runtime version when .NET 4.5 is installed with with Environment.Version you still get: 4.0.30319 If you open the properties of System.dll assembly in .NET 4.5 you'll also see: Notice that the file version is also left at 4.0.xxx. There are differences in build numbers: .NET 4.0 shows 261 and the current .NET 4.5 beta build is 17379. I suppose you can use assume a build number greater than 17000 is .NET 4.5, but that's pretty hokey to say the least. There’s no easy or obvious way to tell whether you are running on 4.0 or 4.5 – to the application they appear to be the same runtime version. And that is what Microsoft intends here. .NET 4.5 is intended as an in-place upgrade. Compile to 4.5 run on 4.0 – not quite! You can compile an application for .NET 4.5 and run it on the 4.0 runtime – that is until you hit a new feature that doesn’t exist on 4.0. At which point the app bombs at runtime. Say you write some code that is mostly .NET 4.0, but only has a few of the new features of .NET 4.5 like aync/await buried deep in the bowels of the application where it only fires occasionally. .NET will happily start your application and run everything 4.0 fine, until it hits that 4.5 code – and then crash unceremoniously at runtime. Oh joy! You can .NET 4.0 applications on .NET 4.5 of course and that should work without much fanfare. Different than .NET 3.0/3.5 Note that this in-place replacement is very different from the side by side installs of .NET 2.0 and 3.0/3.5 which all ran on the 2.0 version of the CLR. The two 3.x versions were basically library enhancements on top of the core .NET 2.0 runtime. Both versions ran under the .NET 2.0 runtime which wasn’t changed (other than for security patches and bug fixes) for the whole 3.x cycle. The 4.5 update instead completely replaces the .NET 4.0 runtime and leaves the actual version number set at v4.0.30319. When you build a new project with Visual Studio 2011, you can still target .NET 4.0 or you can target .NET 4.5. But you are in effect referencing the same set of assemblies for both regardless which version you use. What's different is the compiler used to compile and link your code so compiling with .NET 4.0 gives you just the subset of the functionality that is available in .NET 4.0, but when you use the 4.5 compiler you get the full functionality of what’s actually available in the assemblies and extra libraries. It doesn’t look like you will be able to use Visual Studio 2010 to develop .NET 4.5 applications. Good news – Bad news Microsoft is trying hard to experiment with every possible permutation of releasing new versions of the .NET framework apparently. No two updates have been the same. Clearly updating to a full new version of .NET (ie. .NET 2.0, 4.0 and at some point 5.0 runtimes) has its own set of challenges, but doing an in-place update of the runtime and then not even providing a good way to tell which version is installed is pretty whacky even by Microsoft’s standards. Especially given that .NET 4.5 includes a fairly significant update with all the aysnc functionality baked into the runtime. Most of the IO APIs have been updated to support task based async operation which significantly affects many existing APIs. To make things worse .NET 4.5 will be the initial version of .NET that ships with Windows 8 so it will be with us for a long time to come unless Microsoft finally decides to push .NET versions onto Windows machines as part of system upgrades (which currently doesn’t happen). This is the same story we had when Vista launched with .NET 3.0 which was a minor version that quickly was replaced by 3.5 which was more long lived and practical. People had enough problems dealing with the confusing versioning of the 3.x versions which ran on .NET 2.0. I can’t count the amount support calls and questions I’ve fielded because people couldn’t find a .NET 3.5 entry in the IIS version dialog. The same is likely to happen with .NET 4.5. It’s all well and good when we know that .NET 4.5 is an in-place replacement, but administrators and IT folks not intimately familiar with .NET are unlikely to understand this nuance and end up thoroughly confused which version is installed. It’s hard for me to see any upside to an in-place update and I haven’t really seen a good explanation of why this approach was decided on. Sure if the version stays the same existing assembly bindings don’t break so applications can stay running through an update. I suppose this is useful for some component vendors and strongly signed assemblies in corporate environments. But seriously, if you are going to throw .NET 4.5 into the mix, who won’t be recompiling all code and thoroughly test that code to work on .NET 4.5? A recompile requirement doesn’t seem that serious in light of a major version upgrade.  Resources http://blogs.msdn.com/b/dotnet/archive/2011/09/26/compatibility-of-net-framework-4-5.aspx http://www.devproconnections.com/article/net-framework/net-framework-45-versioning-faces-problems-141160© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• Adding Volcanos and Options - Earthquake Locator, part 2

  - by Bobby Diaz

  Since volcanos are often associated with earthquakes, and vice versa, I decided to show recent volcanic activity on the Earthquake Locator map.  I am pulling the data from a website created for a joint project between the Smithsonian's Global Volcanism Program and the US Geological Survey's Volcano Hazards Program, found here.  They provide a Weekly Volcanic Activity Report as an RSS feed.   I started implementing this new functionality by creating a new Volcano entity in the domain model and adding the following to the EarthquakeService class (I also factored out the common reading/parsing helper methods to a separate FeedReader class that can be used by multiple domain service classes):           private static readonly string VolcanoFeedUrl =             ConfigurationManager.AppSettings["VolcanoFeedUrl"];           /// <summary>         /// Gets the volcano data for the previous week.         /// </summary>         /// <returns>A queryable collection of <see cref="Volcano"/> objects.</returns>         public IQueryable<Volcano> GetVolcanos()         {             var feed = FeedReader.Load(VolcanoFeedUrl);             var list = new List<Volcano>();               if ( feed != null )             {                 foreach ( var item in feed.Items )                 {                     var quake = CreateVolcano(item);                     if ( quake != null )                     {                         list.Add(quake);                     }                 }             }               return list.AsQueryable();         }           /// <summary>         /// Creates a <see cref="Volcano"/> object for each item in the RSS feed.         /// </summary>         /// <param name="item">The RSS item.</param>         /// <returns></returns>         private Volcano CreateVolcano(SyndicationItem item)         {             Volcano volcano = null;             string title = item.Title.Text;             string desc = item.Summary.Text;             double? latitude = null;             double? longitude = null;               FeedReader.GetGeoRssPoint(item, out latitude, out longitude);               if ( !String.IsNullOrEmpty(title) )             {                 title = title.Substring(0, title.IndexOf('-'));             }             if ( !String.IsNullOrEmpty(desc) )             {                 desc = String.Join("\n\n", desc                         .Replace("<p>", "")                         .Split(                             new string[] { "</p>" },                             StringSplitOptions.RemoveEmptyEntries)                         .Select(s => s.Trim())                         .ToArray())                         .Trim();             }               if ( latitude != null && longitude != null )             {                 volcano = new Volcano()                 {                     Id = item.Id,                     Title = title,                     Description = desc,                     Url = item.Links.Select(l => l.Uri.OriginalString).FirstOrDefault(),                     Latitude = latitude.GetValueOrDefault(),                     Longitude = longitude.GetValueOrDefault()                 };             }               return volcano;         } I then added the corresponding LoadVolcanos() method and Volcanos collection to the EarthquakeViewModel class in much the same way I did with the Earthquakes in my previous article in this series. Now that I am starting to add more information to the map, I wanted to give the user some options as to what is displayed and allowing them to choose what gets turned off.  I have updated the MainPage.xaml to look like this:   <UserControl x:Class="EarthquakeLocator.MainPage"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"     xmlns:basic="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls"     xmlns:bing="clr-namespace:Microsoft.Maps.MapControl;assembly=Microsoft.Maps.MapControl"     xmlns:vm="clr-namespace:EarthquakeLocator.ViewModel"     mc:Ignorable="d" d:DesignWidth="640" d:DesignHeight="480" >     <UserControl.Resources>         <DataTemplate x:Key="EarthquakeTemplate">             <Ellipse Fill="Red" Stroke="Black" StrokeThickness="1"                      Width="{Binding Size}" Height="{Binding Size}"                      bing:MapLayer.Position="{Binding Location}"                      bing:MapLayer.PositionOrigin="Center">                 <ToolTipService.ToolTip>                     <StackPanel>                         <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" />                         <TextBlock Text="{Binding UtcTime}" />                         <TextBlock Text="{Binding LocalTime}" />                         <TextBlock Text="{Binding DepthDesc}" />                     </StackPanel>                 </ToolTipService.ToolTip>             </Ellipse>         </DataTemplate>           <DataTemplate x:Key="VolcanoTemplate">             <Polygon Fill="Gold" Stroke="Black" StrokeThickness="1" Points="0,10 5,0 10,10"                      bing:MapLayer.Position="{Binding Location}"                      bing:MapLayer.PositionOrigin="Center"                      MouseLeftButtonUp="Volcano_MouseLeftButtonUp">                 <ToolTipService.ToolTip>                     <StackPanel>                         <TextBlock Text="{Binding Title}" FontSize="14" FontWeight="Bold" />                         <TextBlock Text="Click icon for more information..." />                     </StackPanel>                 </ToolTipService.ToolTip>             </Polygon>         </DataTemplate>     </UserControl.Resources>       <UserControl.DataContext>         <vm:EarthquakeViewModel AutoLoadData="True" />     </UserControl.DataContext>       <Grid x:Name="LayoutRoot">           <bing:Map x:Name="map" CredentialsProvider="--Your-Bing-Maps-Key--"                   Center="{Binding MapCenter, Mode=TwoWay}"                   ZoomLevel="{Binding ZoomLevel, Mode=TwoWay}">               <bing:MapItemsControl ItemsSource="{Binding Earthquakes}"                                   ItemTemplate="{StaticResource EarthquakeTemplate}" />               <bing:MapItemsControl ItemsSource="{Binding Volcanos}"                                   ItemTemplate="{StaticResource VolcanoTemplate}" />         </bing:Map>           <basic:TabControl x:Name="tabs" VerticalAlignment="Bottom" MaxHeight="25" Opacity="0.7">             <basic:TabItem Margin="90,0,-90,0" MouseLeftButtonUp="TabItem_MouseLeftButtonUp">                 <basic:TabItem.Header>                     <TextBlock x:Name="txtHeader" Text="Options"                                FontSize="13" FontWeight="Bold" />                 </basic:TabItem.Header>                   <StackPanel Orientation="Horizontal">                     <TextBlock Text="Earthquakes:" FontWeight="Bold" Margin="3" />                     <StackPanel Margin="3">                         <CheckBox Content=" &lt; 4.0"                                   IsChecked="{Binding ShowLt4, Mode=TwoWay}" />                         <CheckBox Content="4.0 - 4.9"                                   IsChecked="{Binding Show4s, Mode=TwoWay}" />                         <CheckBox Content="5.0 - 5.9"                                   IsChecked="{Binding Show5s, Mode=TwoWay}" />                     </StackPanel>                       <StackPanel Margin="10,3,3,3">                         <CheckBox Content="6.0 - 6.9"                                   IsChecked="{Binding Show6s, Mode=TwoWay}" />                         <CheckBox Content="7.0 - 7.9"                                   IsChecked="{Binding Show7s, Mode=TwoWay}" />                         <CheckBox Content="8.0 +"                                   IsChecked="{Binding ShowGe8, Mode=TwoWay}" />                     </StackPanel>                       <TextBlock Text="Other:" FontWeight="Bold" Margin="50,3,3,3" />                     <StackPanel Margin="3">                         <CheckBox Content="Volcanos"                                   IsChecked="{Binding ShowVolcanos, Mode=TwoWay}" />                     </StackPanel>                 </StackPanel>               </basic:TabItem>         </basic:TabControl>       </Grid> </UserControl> Notice that I added a VolcanoTemplate that uses a triangle-shaped Polygon to represent the Volcano locations, and I also added a second <bing:MapItemsControl /> tag to the map to bind to the Volcanos collection.  The TabControl found below the map houses the options panel that will present the user with several checkboxes so they can filter the different points based on type and other properties (i.e. Magnitude).  Initially, the TabItem is collapsed to reduce it's footprint, but the screen shot below shows the options panel expanded to reveal the available settings:     I have updated the Source Code and Live Demo to include these new features.   Happy Mapping!

  Read the article

• Windows Azure Evolution &ndash; Welcome to VS2012

  - by Shaun

  When the Microsoft released the first preview version of Windows 8 and Visual Studio, many people in the community were asking if the windows azure tool is available to it. The answer was “NO”. Microsoft promised that the windows azure tool will only support the Visual Studio 2010 but when the 2012 was final released, windows azure tool should be work. But now alone with the new windows azure platform was published we got the latest Windows Azure SDK 1.7, which is compatible to the Visual Studio 2012 RC.   You can retrieve the latest version of the Windows Azure SDK through Web Platform Installer, which I think it’s the easiest and simplest way to download and install, since besides the SDK itself it also needs some other components. To download the latest windows azure SDK from Web Platform Installer, just go to the windows azure website and clicked the Develop, .NET and click the blue “install” button. Then you need to select which version of Visual Studio you want to use, Visual Studio 2010 or Visual Studio 2012 RC. After selected the current version you will download an EXE file. This file will lead you to install the Web Platform Installer 4.0 (if you haven’t installed) and the latest windows azure SDK. You can see the version name is June 2012, 1.7. Finally the WebPI will detect the dependent components you need to download and begin to install. But if you want to challenge yourself you can download the components and install them manually. The standalone installations are listed in this page with the instruction on how to install them with necessary pre-requirements.   Once you finished the installation you can open the Visual Studio 2012 RC and as usual, it need to be run as administrator. If you clicked the New Project link from the start page, navigated to Cloud category you will find that there no project template available. Is there anything wrong? So, if you changed the target framework from the default .NET 4.5 to .NET 4 you will see the azure project template. This is because, currently the windows azure instance does not support .NET 4.5. After clicked OK you will see the role creation window, which is similar as what you have seen before. But there are some new role templates in this SDK. Firstly you will have ASP.NET MVC 4 web role available, which means you can create ASP.NET MVC 4 applications for internet, intranet, mobile and WebAPI on the cloud. Then there are two new worker role templates, “Cache Worker Role” and “Worker Role with Service Bus Queue”. “Worker Role with Service Bus Queue” is a worker role which had added necessary references to access the Windows Azure Service Bus Queue. It also have some basic sample code in the worker role class which could read messages from the queue when started. The “Cache Worker Role” is a worker role which has the in-memory distributed cache feature enabled by default. This feature is different than the Windows Azure Caching. It allows the role instance to use its memory as a in-memory distributed cache clusters. By using this feature you can have one or more worker roles as some dedicate cache clusters. Alternatively, you can make part of your web role and worker role’s memory as the cache clusters as well. Let’s just create an ASP.NET MVC 4 Web Role, and click F5 to run it under the local emulator. If you have been working with azure for a while you should know that I need to setup the local storage emulator before running locally if it’s a fresh azure SDK installation. But in this version when we started our azure project the Visual Studio will check if the storage emulator had been initialized. If not, it will run the initializer automatically. And as you can see, in this version the storage emulator relies on the SQL Server 2012 Local DB feature. It will create the emulator database and tables in the default local database. You can set the storage emulator to use a standard SQL Server default instance by using the command “dsinit /instance:.”. The “dsinit” tool now is located at %PROGRAM FILES%\Microsoft SDKs\Windows Azure\Emulator\devstore After the Visual Studio complied and deployed the package our website should be shown in the browser. This is the MVC 4 Web Role home page on my Windows 8 machine in IE10. Another thing you might notice is that, in this version the compute emulator utilizes IIS Express to host the web roles instead of the full IIS. You can add breakpoint in the code and debug, and you can use the local storage emulator to test your code for accessing the storage service. All of them are same as what your are doing now on SDK 1.6. You can switch to use IIS to run your web role in local emulator. Just open the windows azure porject property windows, in the Web page select “Use IIS Web Server”. For more information about this please have a look on Nuno’s blog post. In the role property page in Visual Studio there’s no massive changes. You can configure your role settings such as the endpoints, certificates and local storage, etc.. One thing was added is the Caching tab. Here you can specify enable the caching feature or not, and how much memory you want to use as the cache cluster. I will introduce more details about it in the future posts. The publish and package feature are also no change. You can publish your project to azure directly through Visual Studio 2012, while you can create the package and upload manually. Below is the SDK version of my deployment which is 1.7.30602.1703 in the developer portal.   Summary In this post I introduced about the new Windows Azure SDK 1.7 especially on how it works on the latest Visual Studio 2012 RC. There’s no significant changes in the visual studio tool in this version but some small enhancement such as ASP.NET MVC 4, Cache Worker Role, using SQL 2012 Local DB and IIS Express, etc..   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Overwriting TFS Web Services

  - by javarg

  In this blog I will share a technique I used to intercept TFS Web Services calls. This technique is a very invasive one and requires you to overwrite default TFS Web Services behavior. I only recommend taking such an approach when other means of TFS extensibility fail to provide the same functionality (this is not a supported TFS extensibility point). For instance, intercepting and aborting a Work Item change operation could be implemented using this approach (consider TFS Subscribers functionality before taking this approach, check Martin’s post about subscribers). So let’s get started. The technique consists in versioning TFS Web Services .asmx service classes. If you look into TFS’s ASMX services you will notice that versioning is supported by creating a class hierarchy between different product versions. For instance, let’s take the Work Item management service .asmx. Check the following .asmx file located at: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\_tfs_resources\WorkItemTracking\v3.0\ClientService.asmx The .asmx references the class Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3: <%-- Copyright (c) Microsoft Corporation. All rights reserved. --%> <%@ webservice language="C#" Class="Microsoft.TeamFoundation.WorkItemTracking.Server.ClientService3" %> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The inheritance hierarchy for this service class follows: Note the naming convention used for service versioning (ClientService3, ClientService2, ClientService). We will need to overwrite the latest service version provided by the product (in this case ClientService3 for TFS 2010). The following example intercepts and analyzes WorkItem fields. Suppose we need to validate state changes with more advanced logic other than the provided validations/constraints of the process template. Important: Backup the original .asmx file and create one of your own. Create a Visual Studio Web App Project and include a new ASMX Web Service in the project Add the following references to the project (check the folder %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin\): Microsoft.TeamFoundation.Framework.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.Server.dll Microsoft.TeamFoundation.WorkItemTracking.Client.QueryLanguage.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataAccessLayer.dll Microsoft.TeamFoundation.WorkItemTracking.Server.DataServices.dll Replace the default service implementation with the something similar to the following code: Code Snippet /// <summary> /// Inherit from ClientService3 to overwrite default Implementation /// </summary> [WebService(Namespace = "http://schemas.microsoft.com/TeamFoundation/2005/06/WorkItemTracking/ClientServices/03", Description = "Custom Team Foundation WorkItemTracking ClientService Web Service")] public class CustomTfsClientService : ClientService3 {     [WebMethod, SoapHeader("requestHeader", Direction = SoapHeaderDirection.In)]     public override bool BulkUpdate(         XmlElement package,         out XmlElement result,         MetadataTableHaveEntry[] metadataHave,         out string dbStamp,         out Payload metadata)     {         var xe = XElement.Parse(package.OuterXml);         // We only intercept WorkItems Updates (we can easily extend this sample to capture any operation).         var wit = xe.Element("UpdateWorkItem");         if (wit != null)         {             if (wit.Attribute("WorkItemID") != null)             {                 int witId = (int)wit.Attribute("WorkItemID");                 // With this Id. I can query TFS for more detailed information, using TFS Client API (assuming the WIT already exists).                 var stateChanged =                     wit.Element("Columns").Elements("Column").FirstOrDefault(c => (string)c.Attribute("Column") == "System.State");                 if (stateChanged != null)                 {                     var newStateName = stateChanged.Element("Value").Value;                     if (newStateName == "Resolved")                     {                         throw new Exception("Cannot change state to Resolved!");                     }                 }             }         }         // Finally, we call base method implementation         return base.BulkUpdate(package, out result, metadataHave, out dbStamp, out metadata);     } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } 4. Build your solution and overwrite the original .asmx with the new implementation referencing our new service version (don’t forget to backup it up first). 5. Copy your project’s .dll into the following path: %Program Files%\Microsoft Team Foundation Server 2010\Application Tier\Web Services\bin 6. Try saving a WorkItem into the Resolved state. Enjoy!

  Read the article

• WebSocket and Java EE 7 - Getting Ready for JSR 356 (TOTD #181)

  - by arungupta

  WebSocket is developed as part of HTML 5 specification and provides a bi-directional, full-duplex communication channel over a single TCP socket. It provides dramatic improvement over the traditional approaches of Polling, Long-Polling, and Streaming for two-way communication. There is no latency from establishing new TCP connections for each HTTP message. There is a WebSocket API and the WebSocket Protocol. The Protocol defines "handshake" and "framing". The handshake defines how a normal HTTP connection can be upgraded to a WebSocket connection. The framing defines wire format of the message. The design philosophy is to keep the framing minimum to avoid the overhead. Both text and binary data can be sent using the API. WebSocket may look like a competing technology to Server-Sent Events (SSE), but they are not. Here are the key differences: WebSocket can send and receive data from a client. A typical example of WebSocket is a two-player game or a chat application. Server-Sent Events can only push data data to the client. A typical example of SSE is stock ticker or news feed. With SSE, XMLHttpRequest can be used to send data to the server. For server-only updates, WebSockets has an extra overhead and programming can be unecessarily complex. SSE provides a simple and easy-to-use model that is much better suited. SSEs are sent over traditional HTTP and so no modification is required on the server-side. WebSocket require servers that understand the protocol. SSE have several features that are missing from WebSocket such as automatic reconnection, event IDs, and the ability to send arbitrary events. The client automatically tries to reconnect if the connection is closed. The default wait before trying to reconnect is 3 seconds and can be configured by including "retry: XXXX\n" header where XXXX is the milliseconds to wait before trying to reconnect. Event stream can include a unique event identifier. This allows the server to determine which events need to be fired to each client in case the connection is dropped in between. The data can span multiple lines and can be of any text format as long as EventSource message handler can process it. WebSockets provide true real-time updates, SSE can be configured to provide close to real-time by setting appropriate timeouts. OK, so all excited about WebSocket ? Want to convert your POJOs into WebSockets endpoint ? websocket-sdk and GlassFish 4.0 is here to help! The complete source code shown in this project can be downloaded here. On the server-side, the WebSocket SDK converts a POJO into a WebSocket endpoint using simple annotations. Here is how a WebSocket endpoint will look like: @WebSocket(path="/echo")public class EchoBean { @WebSocketMessage public String echo(String message) { return message + " (from your server)"; }} In this code "@WebSocket" is a class-level annotation that declares a POJO to accept WebSocket messages. The path at which the messages are accepted is specified in this annotation. "@WebSocketMessage" indicates the Java method that is invoked when the endpoint receives a message. This method implementation echoes the received message concatenated with an additional string. The client-side HTML page looks like <div style="text-align: center;"> <form action=""> <input onclick="send_echo()" value="Press me" type="button"> <input id="textID" name="message" value="Hello WebSocket!" type="text"><br> </form></div><div id="output"></div> WebSocket allows a full-duplex communication. So the client, a browser in this case, can send a message to a server, a WebSocket endpoint in this case. And the server can send a message to the client at the same time. This is unlike HTTP which follows a "request" followed by a "response". In this code, the "send_echo" method in the JavaScript is invoked on the button click. There is also a <div> placeholder to display the response from the WebSocket endpoint. The JavaScript looks like: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/websockets/echo"; var websocket = new WebSocket(wsUri); websocket.onopen = function(evt) { onOpen(evt) }; websocket.onmessage = function(evt) { onMessage(evt) }; websocket.onerror = function(evt) { onError(evt) }; function init() { output = document.getElementById("output"); } function send_echo() { websocket.send(textID.value); writeToScreen("SENT: " + textID.value); } function onOpen(evt) { writeToScreen("CONNECTED"); } function onMessage(evt) { writeToScreen("RECEIVED: " + evt.data); } function onError(evt) { writeToScreen('<span style="color: red;">ERROR:</span> ' + evt.data); } function writeToScreen(message) { var pre = document.createElement("p"); pre.style.wordWrap = "break-word"; pre.innerHTML = message; output.appendChild(pre); } window.addEventListener("load", init, false);</script> In this code The URI to connect to on the server side is of the format ws://<HOST>:<PORT>/websockets/<PATH> "ws" is a new URI scheme introduced by the WebSocket protocol. <PATH> is the path on the endpoint where the WebSocket messages are accepted. In our case, it is ws://localhost:8080/websockets/echo WEBSOCKET_SDK-1 will ensure that context root is included in the URI as well. WebSocket is created as a global object so that the connection is created only once. This object establishes a connection with the given host, port and the path at which the endpoint is listening. The WebSocket API defines several callbacks that can be registered on specific events. The "onopen", "onmessage", and "onerror" callbacks are registered in this case. The callbacks print a message on the browser indicating which one is called and additionally also prints the data sent/received. On the button click, the WebSocket object is used to transmit text data to the endpoint. Binary data can be sent as one blob or using buffering. The HTTP request headers sent for the WebSocket call are: GET ws://localhost:8080/websockets/echo HTTP/1.1Origin: http://localhost:8080Connection: UpgradeSec-WebSocket-Extensions: x-webkit-deflate-frameHost: localhost:8080Sec-WebSocket-Key: mDbnYkAUi0b5Rnal9/cMvQ==Upgrade: websocketSec-WebSocket-Version: 13 And the response headers received are Connection:UpgradeSec-WebSocket-Accept:q4nmgFl/lEtU2ocyKZ64dtQvx10=Upgrade:websocket(Challenge Response):00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 The headers are shown in Chrome as shown below: The complete source code shown in this project can be downloaded here. The builds from websocket-sdk are integrated in GlassFish 4.0 builds. Would you like to live on the bleeding edge ? Then follow the instructions below to check out the workspace and install the latest SDK: Check out the source code svn checkout https://svn.java.net/svn/websocket-sdk~source-code-repository Build and install the trunk in your local repository as: mvn install Copy "./bundles/websocket-osgi/target/websocket-osgi-0.3-SNAPSHOT.jar" to "glassfish3/glassfish/modules/websocket-osgi.jar" in your GlassFish 4 latest promoted build. Notice, you need to overwrite the JAR file. Anybody interested in building a cool application using WebSocket and get it running on GlassFish ? :-) This work will also feed into JSR 356 - Java API for WebSocket. On a lighter side, there seems to be less agreement on the name. Here are some of the options that are prevalent: WebSocket (W3C API, the URL is www.w3.org/TR/websockets though) Web Socket (HTML5 Demos - html5demos.com/web-socket) Websocket (Jenkins Plugin - wiki.jenkins-ci.org/display/JENKINS/Websocket%2BPlugin) WebSockets (Used by Mozilla - developer.mozilla.org/en/WebSockets, but use WebSocket as well) Web sockets (HTML5 Working Group - www.whatwg.org/specs/web-apps/current-work/multipage/network.html) Web Sockets (Chrome Blog - blog.chromium.org/2009/12/web-sockets-now-available-in-google.html) I prefer "WebSocket" as that seems to be most common usage and used by the W3C API as well. What do you use ?

  Read the article

• Automating Form Login

  - by Greg_Gutkin

  Introduction A common task in configuring a web application for proxying in Pagelet Producer is setting up form autologin. PP provides a wizard-like tool for detecting the login form fields, but this is usually only the first step in configuring this feature. If the generated configuration doesn't seem to work, some additional manual modifications will be needed to complete the setup. This article will try to guide you through this process while steering you away from common pitfalls. For the purposes of this article, let's assume the following characteristics about your environment: Web Application Base URL: http://host/app (configured as Resource Source URL in PP) Pagelet Producer Base URL: http://pp/pagelets Form Field Auto-Detection Form Autologin is configured in the PP Admin UI under resource_name/Autologin/Form Login. First, you'll enter the URL to the login form under "Login Form Identification". This will enable the admin wizard to connect to and display the login page. Caution: RedirectsMake sure the entered URL matches what you see in the browser's address bar, when the application login page is displayed. For example, even though you may be able to reach the login page by simply typing http://host/app, the URL you end up on may change to http://host/app/login via browser redirect(s).The second URL is the one you will want to use. Caution: External Login ServersThe login page may actually come from a different server than the application you are trying to proxy. For example, you may notice that the login page URL changes to http://hostB/appB. This is common when external SSO products are involved. There are two ways of dealing with this situation. One is to configure Pagelet Producer to participate in SSO. This approach is out of scope of this article and is discussed in a separate whitepaper (TODO add link). The second approach is to use the autologin feature to provide stored credentials to the SSO login form. Since the login form URL is not an extension of the application base URL (PP resource URL), you will need to add a new PP resource for the SSO server and configure the login form on that resource instead of the original application resource. One side benefit of this additional resource is that it can reused for other applications relying on the same SSO server for login. After entering the login page URL (make sure dropdown says "URL"), click "Automatically Detect Form Fields". This will bring up the web app's login page in a new browser window. Fill it out and submit it as you would normally. If everything goes right, Pagelet Producer will intercept the submitted values and fill out all the needed configuration data in the Admin UI. If the login form window doesn't close or configuration data doesn't get filled in, you may have not entered the login page URL correctly. Review the two cautionary notes above and make any necessary changes. If the form fields got filled automatically, it's time to save the configuration and test it out. If you can access a protected area of the backend application via a proxied PP URL without filling out its login form, then you are pretty much done with login form configuration. The only other step you will need to complete before declaring this aspect of configuration production ready is configuring form field source. You may skip to that section below. Manual Login Form Identification Let's take a closer look at Login Form Identification. This determines how Pagelet Producer recognizes login forms as such. URL The most efficient way of detecting login forms is by looking at the page URL. This method can only be used under the following conditions: Login page URL must be different from the post login application URLs. Login page URL must stay constant regardless of the path it takes to reach the page. For example, reaching the login page by going to the application base URL or to a specific protected URL must result in a redirect to the same login page URL (query string excluded). If only the query string parameters change, just leave out the query string from the configured login page URL. If either of these conditions is not fullfilled, you must switch to the RegEx approach below. RegEx If the login page URL is not uniform enough across all scenarios or is indistinguishable from other page locations, PP can be configured to recognize it by looking at the page markup itself. This is accomplished by changing the dropdown to "RegEx". If regular expressions scare you, take comfort from the fact that in most cases you won't need to enter any special regex characters. Let's look at an example: Say you have a login form that looks like <form id='loginForm' action='login?from=pageA' > <input id='user'> <input id='pass'> </form> Since this form has an id attribute, you can be reasonably sure that this login form can be uniquely identified across the web application by this snippet: "id='loginForm'". (Unless, of course your backend web application contains login forms to other apps). Since no wildcards are needed to find this snippet, you can just enter it as is into the RegEx field - no special regular expression characters needed! If the web developer who created the form wasn't kind enough to provide a unique id, you will need to look for other snippets of the page to uniquely identify it. It could be the action URL, an input field id, or some other markup fragment. You should abstain from using UI text as an identifier it may change in translated versions of the page and prevent the login page logic from working for international users. You may need to turn to regular expression wildcard syntax if no simple matches work. For more information on regular expression, refer to the Resources section. Form Submit Location Now we'll look at the form submit location. If the captured URL contains query string parameters that will likely change from one form submission to the next, you will need to change its type to RegEx. This type will tell Pagelet Producer to parse the login page for the action URL and submit to the value found. The regular expression needs to point at the actual action URL with its first grouping expression. Taking the example form definition above, the form submit location regex would be: action='(.*?)' The parentheses are used to identify the actual action URL, while the rest of the expression provides the context for finding it. Expression .*? is a so-called reluctant wildcard that matches any character excluding the single quote that follows. See Resources section below for further information on regular expressions. Manual Form Field Detection If the Admin UI form field detection wizard fails to populate login form configuration page, you will have to enter the fields by hand. Use a built-in browser developer tool or addon (e.g. Firebug) to inspect the form element and its children input elements. For each input element (including hidden elements), create an entry under Form Fields. Change its Source according to the next section. Form Field Source Change the source of any of the fields not exposed to the users of the login form (i.e. hidden fields) to "Generated". This means Pagelet Producer will just use the values returned by the web app rather than supplying values it stored. For fields that contain sensitive data or vary from user to user (e.g. username & password), change the source to User (Credential) Vault. Logging Support To help you troubleshoot you autologin configuration, PP provides some useful logging support. To turn on detailed logging for the autologin feature, navigate to Settings in Admin UI. Under Logging, change the log level for AutoLogin to Finest. Known Limitations Autologin feature may not work as expected if login form fields (not just the values, but the DOM elements themselves) are generated dynamically by client side JavaScript. Resources RegEx RegEx Reference from Java RegEx Test Tool

  Read the article

• MVC 3 AdditionalMetadata Attribute with ViewBag to Render Dynamic UI

  - by Steve Michelotti

  A few months ago I blogged about using Model metadata to render a dynamic UI in MVC 2. The scenario in the post was that we might have a view model where the questions are conditionally displayed and therefore a dynamic UI is needed. To recap the previous post, the solution was to use a custom attribute called [QuestionId] in conjunction with an “ApplicableQuestions” collection to identify whether each question should be displayed. This allowed me to have a view model that looked like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [QuestionId("NB0021")] 4: public string FirstName { get; set; } 5: 6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [QuestionId("NB0022")] 9: public string LastName { get; set; } 10: 11: [UIHint("ScalarQuestion")] 12: [QuestionId("NB0023")] 13: public int Age { get; set; } 14: 15: public IEnumerable<string> ApplicableQuestions { get; set; } At the same time, I was able to avoid repetitive IF statements for every single question in my view: 1: <%: Html.EditorFor(m => m.FirstName, new { applicableQuestions = Model.ApplicableQuestions })%> 2: <%: Html.EditorFor(m => m.LastName, new { applicableQuestions = Model.ApplicableQuestions })%> 3: <%: Html.EditorFor(m => m.Age, new { applicableQuestions = Model.ApplicableQuestions })%> by creating an Editor Template called “ScalarQuestion” that encapsulated the IF statement: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <%@ Import Namespace="DynamicQuestions.Models" %> 3: <%@ Import Namespace="System.Linq" %> 4: <% 5: var applicableQuestions = this.ViewData["applicableQuestions"] as IEnumerable<string>; 6: var questionAttr = this.ViewData.ModelMetadata.ContainerType.GetProperty(this.ViewData.ModelMetadata.PropertyName).GetCustomAttributes(typeof(QuestionIdAttribute), true) as QuestionIdAttribute[]; 7: string questionId = null; 8: if (questionAttr.Length > 0) 9: { 10: questionId = questionAttr[0].Id; 11: } 12: if (questionId != null && applicableQuestions.Contains(questionId)) { %> 13: <div> 14: <%: Html.Label("") %> 15: <%: Html.TextBox("", this.Model)%> 16: </div> 17: <% } %> You might want to go back and read the full post in order to get the full context. MVC 3 offers a couple of new features that make this scenario more elegant to implement. The first step is to use the new [AdditionalMetadata] attribute which, so far, appears to be an under appreciated new feature of MVC 3. With this attribute, I don’t need my custom [QuestionId] attribute anymore - now I can just write my view model like this: 1: [UIHint("ScalarQuestion")] 2: [DisplayName("First Name")] 3: [AdditionalMetadata("QuestionId", "NB0021")] 4: public string FirstName { get; set; } 5:   6: [UIHint("ScalarQuestion")] 7: [DisplayName("Last Name")] 8: [AdditionalMetadata("QuestionId", "NB0022")] 9: public string LastName { get; set; } 10:   11: [UIHint("ScalarQuestion")] 12: [AdditionalMetadata("QuestionId", "NB0023")] 13: public int Age { get; set; } Thus far, the documentation seems to be pretty sparse on the AdditionalMetadata attribute. It’s buried in the Other New Features section of the MVC 3 home page and, after showing the attribute on a view model property, it just says, “This metadata is made available to any display or editor template when a product view model is rendered. It is up to you to interpret the metadata information.” But what exactly does it look like for me to “interpret the metadata information”? Well, it turns out it makes the view much easier to work with. Here is the re-implemented ScalarQuestion template updated for MVC 3 and Razor: 1: @{ 2: object questionId; 3: ViewData.ModelMetadata.AdditionalValues.TryGetValue("QuestionId", out questionId); 4: if (ViewBag.applicableQuestions.Contains((string)questionId)) { 5: <div> 6: @Html.LabelFor(m => m) 7: @Html.TextBoxFor(m => m) 8: </div> 9: } 10: } So we’ve gone from 17 lines of code (in the MVC 2 version) to about 7-8 lines of code here. The first thing to notice is that in MVC 3 we now have a property called “AdditionalValues” that hangs off of the ModelMetadata property. This is automatically populated by any [AdditionalMetadata] attributes on the property. There is no more need for me to explicitly write Reflection code to GetCustomAttributes() and then check to see if those attributes were present. I can just call TryGetValue() on the dictionary to see if they were present. Secondly, the “applicableQuestions” anonymous type that I passed in from the calling view – in MVC 3 I now have a dynamic ViewBag property where I can just “dot into” the applicableQuestions with a nicer syntax than dictionary square bracket syntax. And there’s no problems calling the Contains() method on this dynamic object because at runtime the DLR has resolved that it is a generic List<string>. At this point you might be saying that, yes the view got much nicer than the MVC 2 version, but my view model got slightly worse.  In the previous version I had a nice [QuestionId] attribute but now, with the [AdditionalMetadata] attribute, I have to type the string “QuestionId” for every single property and hope that I don’t make a typo. Well, the good news is that it’s easy to create your own attributes that can participate in the metadata’s additional values. The key is that the attribute must implement that IMetadataAware interface and populate the AdditionalValues dictionary in the OnMetadataCreated() method: 1: public class QuestionIdAttribute : Attribute, IMetadataAware 2: { 3: public string Id { get; set; } 4:   5: public QuestionIdAttribute(string id) 6: { 7: this.Id = id; 8: } 9:   10: public void OnMetadataCreated(ModelMetadata metadata) 11: { 12: metadata.AdditionalValues["QuestionId"] = this.Id; 13: } 14: } This now allows me to encapuslate my “QuestionId” string in just one place and get back to my original attribute which can be used like this: [QuestionId(“NB0021”)]. The [AdditionalMetadata] attribute is a powerful and under-appreciated new feature of MVC 3. Combined with the dynamic ViewBag property, you can do some really interesting things with your applications with less code and ceremony.

  Read the article

• Create PDF document using iTextSharp in ASP.Net 4.0 and MemoryMappedFile

  - by sreejukg

  In this article I am going to demonstrate how ASP.Net developers can programmatically create PDF documents using iTextSharp. iTextSharp is a software component, that allows developers to programmatically create or manipulate PDF documents. Also this article discusses the process of creating in-memory file, read/write data from/to the in-memory file utilizing the new feature MemoryMappedFile. I have a database of users, where I need to send a notice to all my users as a PDF document. The sending mail part of it is not covered in this article. The PDF document will contain the company letter head, to make it more official. I have a list of users stored in a database table named “tblusers”. For each user I need to send customized message addressed to them personally. The database structure for the users is give below. id Title Full Name 1 Mr. Sreeju Nair K. G. 2 Dr. Alberto Mathews 3 Prof. Venketachalam Now I am going to generate the pdf document that contains some message to the user, in the following format. Dear <Title> <FullName>, The message for the user. Regards, Administrator Also I have an image, bg.jpg that contains the background for the document generated. I have created .Net 4.0 empty web application project named “iTextSharpSample”. First thing I need to do is to download the iTextSharp dll from the source forge. You can find the url for the download here. http://sourceforge.net/projects/itextsharp/files/ I have extracted the Zip file and added the itextsharp.dll as a reference to my project. Also I have added a web form named default.aspx to my project. After doing all this, the solution explorer have the following view. In the default.aspx page, I inserted one grid view and associated it with a SQL Data source control that bind data from tblusers. I have added a button column in the grid view with text “generate pdf”. The output of the page in the browser is as follows. Now I am going to create a pdf document when the user clicking on the Generate PDF button. As I mentioned before, I am going to work with the file in memory, I am not going to create a file in the disk. I added an event handler for button by specifying onrowcommand event handler. My gridview source looks like <asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataSourceID="SqlDataSource1" Width="481px" CellPadding="4" ForeColor="#333333" GridLines="None" onrowcommand="Generate_PDF" > ………………………………………………………………………….. ………………………………………………………………………….. </asp:GridView> In the code behind, I wrote the corresponding event handler. protected void Generate_PDF(object sender, GridViewCommandEventArgs e) { // The button click event handler code. // I am going to explain the code for this section in the remaining part of the article } The Generate_PDF method is straight forward, It get the title, fullname and message to some variables, then create the pdf using these variables. The code for getting data from the grid view is as follows // get the row index stored in the CommandArgument property int index = Convert.ToInt32(e.CommandArgument); // get the GridViewRow where the command is raised GridViewRow selectedRow = ((GridView)e.CommandSource).Rows[index]; string title = selectedRow.Cells[1].Text; string fullname = selectedRow.Cells[2].Text; string msg = @"There are some changes in the company policy, due to this matter you need to submit your latest address to us. Please update your contact details / personnal details by visiting the member area of the website. ................................... "; since I don’t want to save the file in the disk, I am going the new feature introduced in .Net framework 4, called Memory-Mapped Files. Using Memory-Mapped mapped file, you can created non-persisted memory mapped files, that are not associated with a file in a disk. So I am going to create a temporary file in memory, add the pdf content to it, then write it to the output stream. To read more about MemoryMappedFile, read this msdn article http://msdn.microsoft.com/en-us/library/dd997372.aspx The below portion of the code using MemoryMappedFile object to create a test pdf document in memory and perform read/write operation on file. The CreateViewStream() object will give you a stream that can be used to read or write data to/from file. The code is very straight forward and I included comment so that you can understand the code. using (MemoryMappedFile mmf = MemoryMappedFile.CreateNew("test1.pdf", 1000000)) { // Create a new pdf document object using the constructor. The parameters passed are document size, left margin, right margin, top margin and bottom margin. iTextSharp.text.Document d = new iTextSharp.text.Document(PageSize.A4, 72,72,172,72); //get an instance of the memory mapped file to stream object so that user can write to this using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { // associate the document to the stream. PdfWriter.GetInstance(d, stream); /* add an image as bg*/ iTextSharp.text.Image jpg = iTextSharp.text.Image.GetInstance(Server.MapPath("Image/bg.png")); jpg.Alignment = iTextSharp.text.Image.UNDERLYING; jpg.SetAbsolutePosition(0, 0); //this is the size of my background letter head image. the size is in points. this will fit to A4 size document. jpg.ScaleToFit(595, 842); d.Open(); d.Add(jpg); d.Add(new Paragraph(String.Format("Dear {0} {1},", title, fullname))); d.Add(new Paragraph("\n")); d.Add(new Paragraph(msg)); d.Add(new Paragraph("\n")); d.Add(new Paragraph(String.Format("Administrator"))); d.Close(); } //read the file data byte[] b; using (MemoryMappedViewStream stream = mmf.CreateViewStream()) { BinaryReader rdr = new BinaryReader(stream); b = new byte[mmf.CreateViewStream().Length]; rdr.Read(b, 0, (int)mmf.CreateViewStream().Length); } Response.Clear(); Response.ContentType = "Application/pdf"; Response.BinaryWrite(b); Response.End(); } Press ctrl + f5 to run the application. First I got the user list. Click on the generate pdf icon. The created looks as follows. Summary: Creating pdf document using iTextSharp is easy. You will get lot of information while surfing the www. Some useful resources and references are mentioned below http://itextsharp.com/ http://www.mikesdotnetting.com/Article/82/iTextSharp-Adding-Text-with-Chunks-Phrases-and-Paragraphs http://somewebguy.wordpress.com/2009/05/08/itextsharp-simplify-your-html-to-pdf-creation/ Hope you enjoyed the article.

  Read the article

• Developer’s Life – Disaster Lessons – Notes from the Field #039

  - by Pinal Dave

  [Note from Pinal]: This is a 39th episode of Notes from the Field series. What is the best solution do you have when you encounter a disaster in your organization. Now many of you would answer that in this scenario you would have another standby machine or alternative which you will plug in. Now let me ask second question – What would you do if you as an individual faces disaster?  In this episode of the Notes from the Field series database expert Mike Walsh explains a very crucial issue we face in our career, which is not technical but more to relate to human nature. Read on this may be the best blog post you might read in recent times. Howdy! When it was my turn to share the Notes from the Field last time, I took a departure from my normal technical content to talk about Attitude and Communication.(http://blog.sqlauthority.com/2014/05/08/developers-life-attitude-and-communication-they-can-cause-problems-notes-from-the-field-027/) Pinal said it was a popular topic so I hope he won’t mind if I stick with Professional Development for another of my turns at sharing some information here. Like I said last time, the “soft skills” of the IT world are often just as important – sometimes more important – than the technical skills. As a consultant with Linchpin People – I see so many situations where the professional skills I’ve gained and use are more valuable to clients than knowing the best way to tune a query. Today I want to continue talking about professional development and tell you about the way I almost got myself hit by a train – and why that matters in our day jobs. Sometimes we can learn a lot from disasters. Whether we caused them or someone else did. If you are interested in learning about some of my observations in these lessons you can see more where I talk about lessons from disasters on my blog. For now, though, onto how I almost got my vehicle hit by a train… The Train Crash That Almost Was…. My family and I own a little schoolhouse building about a 10 mile drive away from our house. We use it as a free resource for families in the area that homeschool their children – so they can have some class space. I go up there a lot to check in on the property, to take care of the trash and to do work on the property. On the way there, there is a very small Stop Sign controlled railroad intersection. There is only two small freight trains a day passing there. Actually the same train, making a journey south and then back North. That’s it. This road is a small rural road, barely ever a second car driving in the neighborhood there when I am. The stop sign is pretty much there only for the train crossing. When we first bought the building, I was up there a lot doing renovations on the property. Being familiar with the area, I am also familiar with the train schedule and know the tracks are normally free of trains. So I developed a bad habit. You see, I’d approach the stop sign and slow down as I roll through it. Sometimes I’d do a quick look and come to an “almost” stop there but keep on going. I let my impatience and complacency take over. And that is because most of the time I was going there long after the train was done for the day or in between the runs. This habit became pretty well established after a couple years of driving the route. The behavior reinforced a bit by the success ratio. I saw others doing it as well from the neighborhood when I would happen to be there around the time another car was there. Well. You already know where this ends up by the title and backstory here. A few months ago I came to that little crossing, and I started to do the normal routine. I’d pretty much stopped looking in some respects because of the pattern I’d gotten into.  For some reason I looked and heard and saw the train slowly approaching and slammed on my brakes and stopped. It was an abrupt stop, and it was close. I probably would have made it okay, but I sat there thinking about lessons for IT professionals from the situation once I started breathing again and watched the cars loaded with sand and propane slowly labored down the tracks… Here are Those Lessons… It’s easy to get stuck into a routine – That isn’t always bad. Except when it’s a bad routine. Momentum and inertia are powerful. Once you have a habit and a routine developed – it’s really hard to break that. Make sure you are setting the right routines and habits TODAY. What almost dangerous things are you doing today? How are you almost messing up your production environment today? Stop doing that. Be Deliberate – (Even when you are the only one) – Like I said – a lot of people roll through that stop sign. Perhaps the neighbors or other drivers think “why is he fully stopping and looking… The train only comes two times a day!” – they can think that all they want. Through deliberate actions and forcing myself to pay attention, I will avoid that oops again. Slow down. Take a deep breath. Be Deliberate in your job. Pay attention to the small stuff and go out of your way to be careful. It will save you later. Be Observant – Keep your eyes open. By looking around, observing the situation and understanding what your servers, databases, users and vendors are doing – you’ll notice when something is out of place. But if you don’t know what is normal, if you don’t look to make sure nothing has changed – that train will come and get you. Where can you be more observant? What warning signs are you ignoring in your environment today? In the IT world – trains are everywhere. Projects move fast. Decisions happen fast. Problems turn from a warning sign to a disaster quickly. If you get stuck in a complacent pattern of “Everything is okay, it always has been and always will be” – that’s the time that you will most likely get stuck in a bad situation. Don’t let yourself get complacent, don’t let your team get complacent. That will lead to being proactive. And a proactive environment spends less money on consultants for troubleshooting problems you should have seen ahead of time. You can spend your money and IT budget on improving for your customers. If you want to get started with performance analytics and triage of virtualized SQL Servers with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• C#/.NET Little Pitfalls: The Dangers of Casting Boxed Values

  - by James Michael Hare

  Starting a new series to parallel the Little Wonders series.  In this series, I will examine some of the small pitfalls that can occasionally trip up developers. Introduction: Of Casts and Conversions What happens when we try to assign from an int and a double and vice-versa? 1: double pi = 3.14; 2: int theAnswer = 42; 3:  4: // implicit widening conversion, compiles! 5: double doubleAnswer = theAnswer; 6:  7: // implicit narrowing conversion, compiler error! 8: int intPi = pi; As you can see from the comments above, a conversion from a value type where there is no potential data loss is can be done with an implicit conversion.  However, when converting from one value type to another may result in a loss of data, you must make the conversion explicit so the compiler knows you accept this risk.  That is why the conversion from double to int will not compile with an implicit conversion, we can make the conversion explicit by adding a cast: 1: // explicit narrowing conversion using a cast, compiler 2: // succeeds, but results may have data loss: 3: int intPi = (int)pi; So for value types, the conversions (implicit and explicit) both convert the original value to a new value of the given type.  With widening and narrowing references, however, this is not the case.  Converting reference types is a bit different from converting value types.  First of all when you perform a widening or narrowing you don’t really convert the instance of the object, you just convert the reference itself to the wider or narrower reference type, but both the original and new reference type both refer back to the same object. Secondly, widening and narrowing for reference types refers the going down and up the class hierarchy instead of referring to precision as in value types.  That is, a narrowing conversion for a reference type means you are going down the class hierarchy (for example from Shape to Square) whereas a widening conversion means you are going up the class hierarchy (from Square to Shape).  1: var square = new Square(); 2:  3: // implicitly convers because all squares are shapes 4: // (that is, all subclasses can be referenced by a superclass reference) 5: Shape myShape = square; 6:  7: // implicit conversion not possible, not all shapes are squares! 8: // (that is, not all superclasses can be referenced by a subclass reference) 9: Square mySquare = (Square) myShape; So we had to cast the Shape back to Square because at that point the compiler has no way of knowing until runtime whether the Shape in question is truly a Square.  But, because the compiler knows that it’s possible for a Shape to be a Square, it will compile.  However, if the object referenced by myShape is not truly a Square at runtime, you will get an invalid cast exception. Of course, there are other forms of conversions as well such as user-specified conversions and helper class conversions which are beyond the scope of this post.  The main thing we want to focus on is this seemingly innocuous casting method of widening and narrowing conversions that we come to depend on every day and, in some cases, can bite us if we don’t fully understand what is going on!  The Pitfall: Conversions on Boxed Value Types Can Fail What if you saw the following code and – knowing nothing else – you were asked if it was legal or not, what would you think: 1: // assuming x is defined above this and this 2: // assignment is syntactically legal. 3: x = 3.14; 4:  5: // convert 3.14 to int. 6: int truncated = (int)x; You may think that since x is obviously a double (can’t be a float) because 3.14 is a double literal, but this is inaccurate.  Our x could also be dynamic and this would work as well, or there could be user-defined conversions in play.  But there is another, even simpler option that can often bite us: what if x is object? 1: object x; 2:  3: x = 3.14; 4:  5: int truncated = (int) x; On the surface, this seems fine.  We have a double and we place it into an object which can be done implicitly through boxing (no cast) because all types inherit from object.  Then we cast it to int.  This theoretically should be possible because we know we can explicitly convert a double to an int through a conversion process which involves truncation. But here’s the pitfall: when casting an object to another type, we are casting a reference type, not a value type!  This means that it will attempt to see at runtime if the value boxed and referred to by x is of type int or derived from type int.  Since it obviously isn’t (it’s a double after all) we get an invalid cast exception! Now, you may say this looks awfully contrived, but in truth we can run into this a lot if we’re not careful.  Consider using an IDataReader to read from a database, and then attempting to select a result row of a particular column type: 1: using (var connection = new SqlConnection("some connection string")) 2: using (var command = new SqlCommand("select * from employee", connection)) 3: using (var reader = command.ExecuteReader()) 4: { 5: while (reader.Read()) 6: { 7: // if the salary is not an int32 in the SQL database, this is an error! 8: // doesn't matter if short, long, double, float, reader [] returns object! 9: total += (int) reader["annual_salary"]; 10: } 11: } Notice that since the reader indexer returns object, if we attempt to convert using a cast to a type, we have to make darn sure we use the true, actual type or this will fail!  If the SQL database column is a double, float, short, etc this will fail at runtime with an invalid cast exception because it attempts to convert the object reference! So, how do you get around this?  There are two ways, you could first cast the object to its actual type (double), and then do a narrowing cast to on the value to int.  Or you could use a helper class like Convert which analyzes the actual run-time type and will perform a conversion as long as the type implements IConvertible. 1: object x; 2:  3: x = 3.14; 4:  5: // if you want to cast, must cast out of object to double, then 6: // cast convert. 7: int truncated = (int)(double) x; 8:  9: // or you can call a helper class like Convert which examines runtime 10: // type of the value being converted 11: int anotherTruncated = Convert.ToInt32(x); Summary You should always be careful when performing a conversion cast from values boxed in object that you are actually casting to the true type (or a sub-type). Since casting from object is a widening of the reference, be careful that you either know the exact, explicit type you expect to be held in the object, or instead avoid the cast and use a helper class to perform a safe conversion to the type you desire. Technorati Tags: C#,.NET,Pitfalls,Little Pitfalls,BlackRabbitCoder

  Read the article

• Integrating Flickr with ASP.Net application

  - by sreejukg

  Flickr is the popular photo management and sharing application offered by yahoo. The services from flicker allow you to store and share photos and videos online. Flicker offers strong API support for almost all services they provide. Using this API, developers can integrate photos to their public website. Since 2005, developers have collaborated on top of Flickr's APIs to build fun, creative, and gorgeous experiences around photos that extend beyond Flickr. In this article I am going to demonstrate how easily you can bring the photos stored on flicker to your website. Let me explain the scenario this article is trying to address. I have a flicker account where I upload photos and share in many ways offered by Flickr. Now I have a public website, instead of re-upload the photos again to public website, I want to show this from Flickr. Also I need complete control over what photo to display. So I went and referred the Flickr documentation and there is API support ready to address my scenario (and more… ). FlickerAPI for ASP.Net To Integrate Flicker with ASP.Net applications, there is a library available in CodePlex. You can find it here http://flickrnet.codeplex.com/ Visit the URL and download the latest version. The download includes a Zip file, when you unzip you will get a number of dlls. Since I am going to use ASP.Net application, I need FlickrNet.dll. See the screenshot of all the dlls, and there is a help file available in the download (.chm) for your reference. Once you have the dll, you need to use Flickr API from your website. I assume you have a flicker account and you are familiar with Flicker services. Arrange your photos using Sets in Flickr In flicker, you can define sets and add your uploaded photos to sets. You can compare set to photo album. A set is a logical collection of photos, which is an excellent option for you to categorize your photos. Typically you will have a number of sets each set having few photos. You can write application that brings photos from sets to your website. For the purpose of this article I already created a set Flickr and added some photos to it. Once you logged in to Flickr, you can see the Sets under the Menu. In the Sets page, you will see all the sets you have created. As you notice, you can see certain sample images I have uploaded just to test the functionality. Though I wish I couldn’t create good photos so please bear with me. I have created 2 photo sets named Blue Album and Red Album. Click on the image for the set, will take you to the corresponding set page. In the set “Red Album” there are 4 photos and the set has a unique ID (highlighted in the URL). You can simply retrieve the photos with the set id from your application. In this article I am going to retrieve the images from Red album in my ASP.Net page. For that First I need to setup FlickrAPI for my usage. Configure Flickr API Key As I mentioned, we are going to use Flickr API to retrieve the photos stored in Flickr. In order to get access to Flickr API, you need an API key. To create an API key, navigate to the URL http://www.flickr.com/services/apps/create/ Click on Request an API key link, now you need to tell Flickr whether your application in commercial or non-commercial. I have selected a non-commercial key. Now you need to enter certain information about your application. Once you enter the details, Click on the submit button. Now Flickr will create the API key for your application. Generating non-commercial API key is very easy, in couple of steps the key will be generated and you can use the key in your application immediately. ASP.Net application for retrieving photos Now we need write an ASP.Net application that display pictures from Flickr. Create an empty web application (I named this as FlickerIntegration) and add a reference to FlickerNet.dll. Add a web form page to the application where you will retrieve and display photos(I have named this as Gallery.aspx). After doing all these, the solution explorer will look similar to following. I have used the below code in the Gallery.aspx page. The output for the above code is as follows. I am going to explain the code line by line here. First it is adding a reference to the FlickrNet namespace. using FlickrNet; Then create a Flickr object by using your API key. Flickr f = new Flickr("<yourAPIKey>"); Now when you retrieve photos, you can decide what all fields you need to retrieve from Flickr. Every photo in Flickr contains lots of information. Retrieving all will affect the performance. For the demonstration purpose, I have retrieved all the available fields as follows. PhotoSearchExtras.All But if you want to specify the fields you can use logical OR operator(|). For e.g. the following statement will retrieve owner name and date taken. PhotoSearchExtras extraInfo = PhotoSearchExtras.OwnerName | PhotoSearchExtras.DateTaken; Then retrieve all the photos from a photo set using PhotoSetsGetPhotos method. I have passed the PhotoSearchExtras object created earlier. PhotosetPhotoCollection photos = f.PhotosetsGetPhotos("72157629872940852", extraInfo); The PhotoSetsGetPhotos method will return a collection of Photo objects. You can just navigate through the collection using a foreach statement. foreach (Photo p in photos) {     //access each photo properties } Photo class have lot of properties that map with the properties from Flickr. The chm documentation comes along with the CodePlex download is a great asset for you to understand the fields. In the above code I just used the following p.LargeUrl – retrieves the large image url for the photo. p.ThumbnailUrl – retrieves the thumbnail url for the photo p.Title – retrieves the Title of the photo p.DateUploaded – retrieves the date of upload Visual Studio intellisense will give you all properties, so it is easy, you can just try with Visual Studio intellisense to find the right properties you are looking for. Most of hem are self-explanatory. So you can try retrieving the required properties. In the above code, I just pushed the photos to the page. In real time you can use the retrieved photos along with JQuery libraries to create animated photo galleries, slideshows etc. Configuration and Troubleshooting If you get access denied error while executing the code, you need to disable the caching in Flickr API. FlickrNet cache the photos to your local disk when retrieved. You can specify a cache folder where the application need write permission. You can specify the Cache folder in the code as follows. Flickr.CacheLocation = Server.MapPath("./FlickerCache/"); If the application doesn’t have have write permission to the cache folder, the application will throw access denied error. If you cannot give write permission to the cache folder, then you must disable the caching. You can do this from code as follows. Flickr.CacheDisabled = true; Disabling cache will have an impact on the performance. Take care! Also you can define the Flickr settings in web.config file.You can find the documentation here. http://flickrnet.codeplex.com/wikipage?title=ExampleConfigFile&ProjectName=flickrnet Flickr is a great place for storing and sharing photos. The API access allows developers to do seamless integration with the photos uploaded on Flickr.

  Read the article

• The last MVVM you'll ever need?

  - by Nuri Halperin

  As my MVC projects mature and grow, the need to have some omnipresent, ambient model properties quickly emerge. The application no longer has only one dynamic pieced of data on the page: A sidebar with a shopping cart, some news flash on the side – pretty common stuff. The rub is that a controller is invoked in context of a single intended request. The rest of the data, even though it could be just as dynamic, is expected to appear on it's own. There are many solutions to this scenario. MVVM prescribes creating elaborate objects which expose your new data as a property on some uber-object with more properties exposing the "side show" ambient data. The reason I don't love this approach is because it forces fairly acute awareness of the view, and soon enough you have many MVVM objects laying around, and views have to start doing null-checks in order to ensure you really supplied all the values before binding to them. Ick. Just as unattractive is the ViewData dictionary. It's not strongly typed, and in both this and the MVVM approach someone has to populate these properties – n'est pas? Where does that live? With MVC2, we get the formerly-futures  feature Html.RenderAction(). The feature allows you plant a line in a view, of the format: <% Html.RenderAction("SessionInterest", "Session"); %> While this syntax looks very clean, I can't help being bothered by it. MVC was touting a very strong separation of concerns, the Model taking on the role of the business logic, the controller handling route and performing minimal view-choosing operations and the views strictly focused on rendering out angled-bracket tags. The RenderAction() syntax has the view calling some controller and invoking it inline with it's runtime rendering. This – to my taste – embeds too much  knowledge of controllers into the view's code – which was allegedly forbidden.  The one way flow "Controller Receive Data –> Controller invoke Model –> Controller select view –> Controller Hand data to view" now gets a "View calls controller and gets it's own data" which is not so one-way anymore. Ick. I toyed with some other solutions a bit, including some base controllers, special view classes etc. My current favorite though is making use of the ExpandoObject and dynamic features with C# 4.0. If you follow Phil Haack or read a bit from David Heyden you can see the general picture emerging. The game changer is that using the new dynamic syntax, one can sprout properties on an object and make use of them in the view. Well that beats having a bunch of uni-purpose MVVM's any day! Rather than statically exposed properties, we'll just use the capability of adding members at runtime. Armed with new ideas and syntax, I went to work: First, I created a factory method to enrich the focuse object: public static class ModelExtension { public static dynamic Decorate(this Controller controller, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = CodeCampBL.SessoinInterest(); result.TagUsage = CodeCampBL.TagUsage(); return result; } } This gives me a nice fluent way to have the controller add the rest of the ambient "side show" items (SessionInterest, TagUsage in this demo) and expose them all as the Model: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); dynamic result = this.Decorate(data); return View(result); } So now what remains is that my view knows to expect a dynamic object (rather than statically typed) so that the ASP.NET page compiler won't barf: <%@ Page Language="C#" Title="Ambient Demo" MasterPageFile="~/Views/Shared/Ambient.Master" Inherits="System.Web.Mvc.ViewPage<dynamic>" %> Notice the generic ViewPage<dynamic>. It doesn't work otherwise. In the page itself, Model.Value property contains the main data returned from the controller. The nice thing about this, is that the master page (Ambient.Master) also inherits from the generic ViewMasterPage<dynamic>. So rather than the page worrying about all this ambient stuff, the side bars and panels for ambient data all reside in a master page, and can be rendered using the RenderPartial() syntax: <% Html.RenderPartial("TagCloud", Model.SessionInterest as Dictionary<string, int>); %> Note here that a cast is necessary. This is because although dynamic is magic, it can't figure out what type this property is, and wants you to give it a type so its binder can figure out the right property to bind to at runtime. I use as, you can cast if you like. So there we go – no violation of MVC, no explosion of MVVM models and voila – right? Well, I could not let this go without a tweak or two more. The first thing to improve, is that some views may not need all the properties. In that case, it would be a waste of resources to populate every property. The solution to this is simple: rather than exposing properties, I change d the factory method to expose lambdas - Func<T> really. So only if and when a view accesses a member of the dynamic object does it load the data. public static class ModelExtension { // take two.. lazy loading! public static dynamic LazyDecorate(this Controller c, object mainValue) { dynamic result = new ExpandoObject(); result.Value = mainValue; result.SessionInterest = new Func<Dictionary<string, int>>(() => CodeCampBL.SessoinInterest()); result.TagUsage = new Func<Dictionary<string, int>>(() => CodeCampBL.TagUsage()); return result; } } Now that lazy loading is in place, there's really no reason not to hook up all and any possible ambient property. Go nuts! Add them all in – they won't get invoked unless used. This now requires changing the signature of usage on the ambient properties methods –adding some parenthesis to the master view: <% Html.RenderPartial("TagCloud", Model.SessionInterest() as Dictionary<string, int>); %> And, of course, the controller needs to call LazyDecorate() rather than the old Decorate(). The final touch is to introduce a convenience method to the my Controller class , so that the tedium of calling Decorate() everywhere goes away. This is done quite simply by adding a bunch of methods, matching View(object), View(string,object) signatures of the Controller class: public ActionResult Index() { var data = SyndicationBL.Refresh(TWEET_SOURCE_URL); return AmbientView(data); } //these methods can reside in a base controller for the solution: public ViewResult AmbientView(dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(result); } public ViewResult AmbientView(string viewName, dynamic data) { dynamic result = ModelExtension.LazyDecorate(this, data); return View(viewName, result); } The call to AmbientView now replaces any call the View() that requires the ambient data. DRY sattisfied, lazy loading and no need to replace core pieces of the MVC pipeline. I call this a good MVC day. Enjoy!

  Read the article

< Previous Page | 158 159 160 161 162 163 164 165 166 167 168 169  | Next Page >