Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 159/239 | < Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >

• Gaming blew fuse: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting.

  Read the article

• HDD not detected whenever first power on (detected at BIOS level)

  - by Alvin Lim

  I am using Asus P8H61-M LX Motherboard with latest version of BIOS: 4401 One SATA-3 Western Digital Black Series 1.5TB is attached to SATA port 0 A Samsung 22x DVDRW SATA drive attached to SATA Port 1. ps/2 Logitech mouse and keyboard. CPU is i3 with DDR3 8Gb RAM. no other devices are installed. My problem is that when I turn on the computer, the WD HDD is not detected. ie cannot be booted. I have to press ctrl+alt+del in order to get it detected. I'd used the WD data lifeguard software to scan the HDD, the smart status is OK, the surface scan does not show any error at all. Where did I do wrong? Any advice is greatly appreciated.

  Read the article

• How can I automate restarting a vmware vm

  - by Stu

  I have a vm that does nothing but run magic jack. Magic jack doesn't run perfectly in a vm. It works great for days then randomly the vm reboots. except it doesn't come up clean. It gets to the windows splash screen and hangs spinning the cpu. I don't care how I solve the problem (although not crashing in the first place would be ideal) but I just need the vm to reboot cleanly when it does crash. Is there a windows registry setting I can say "on crash, reboot" or something like that?

  Read the article

• how to debug BSOD irql_not_less_or_equal error

  - by Sev

  So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

  Read the article

• How do I tell if a Python pip install is working correctly or hanging?

  - by wobbily_col

  I am trying to install the python pandas package in a virtualenv using pip. On my development machine it installed correctly, but now I am trying on the server, it gets so far then it seems to get stuck: warnings.warn(LapackSrcNotFoundError.__doc__) /apps/PYTHON/2.7.3/lib/python2.7/distutils/dist.py:267: UserWarning: Unknown distribution option: 'define_macros' warnings.warn(msg) non-existing path in 'numpy/distutils': 'site.cfg' non-existing path in 'numpy/lib': 'benchmarks' Could not locate executable gfortran Could not locate executable f95 Found executable /apps/modules/wrappers/fortran/ifort Top shows ifort running at 46% cpu. Is there any way I can tell if this is working correctly (can I check files it is updating for example), or if it is stuck in a loop? It has been running for 40 minutes so far.

  Read the article

• MSSQL, ASP.NET, IIS. SQL Server perfmon log question

  - by Datapimp23

  Hi, I'm testing a web application that runs on a hypervisor. The database server and the webserver are seperate vm's that run on the same hypervisor. We did some tests and the functions perform ok. I want you guys to look at a screenshot of a permon log of the sql 2005 server on the busiest moment. The webserver perfmon log looks fine and it's obvious that we have enough resources to present the page in a timely fashion. http://d.imagehost.org/view/0919/heavyload http://d.imagehost.org/0253/heavyloadz.jpg Zoomed out The striped blue line maxing out is the Processor que length (scale 100,0) The green line at around value 30 is Available MBytes (scale 0,01) The rest of the counters are visible on the screenshot. The sql server machine has no CPU limitations on the hypervisor resources and has 5 vcpu's and 5 GB RAM. Can someone help me to interpret this log. Thanks

  Read the article

• lucid lynx runaway process

  - by Jerome

  I am runnning lucid lynx with a gnome desktop. After uninstalling the klipper program there is a new and unwelcome process that begins at startup and takes around 66% of my cpu time. According to "top", the process number is 10 and the name of the process is "events/1". I am unable to kill the process using "top" or "kill". I have no extra startup applications except for gnome-do and tomboy. Eliminating these has no effect. Can anyone help?

  Read the article

• Computer temporarily freezes and then resumes

  - by trizicus

  This happens on ALL operating systems (7, Ubuntu, etc.). What happens is everything for 1-3 seconds becomes unresponsive, I then hear what sounds like my other internal hard drive 'spinning up', and then viola everything is responsive again. Note: Already ran SMART tests, no issues at all. I think issue is that the HDD spins down and when need it gets 'turned-on' (OS settings turn off HDD's after 20 mins of inactivity) and because my pagefile is on the other HDD it causes OS to temporarily freeze. Need more tips, and insight. Thanks More info: Running Quad CPU, 4GB RAM, Intel SSD, GT 240.

  Read the article

• Asus me302c create script crash

  - by wxfred

  State beforehand: So far, only Asus me302c would crash when it creates a script. This device can create renderscript context successfully 06-03 10:12:50.509: V/RenderScript_jni(3144): RS compat mode 06-03 10:12:50.509: V/RenderScript(3144): 0x610bbfc0 Launching thread(s), CPUs 4 06-03 10:12:50.549: D/libEGL(3144): loaded /vendor/lib/egl/libEGL_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX544_115.so 06-03 10:12:50.619: D/OpenGLRenderer(3144): Enabling debug mode 0 06-03 10:12:52.869: D/dalvikvm(3144): Rejecting registerization due to ushr-int/lit8 v4, v7, (#19) When create a script, it crashed. 06-03 09:55:09.859: D/basefilter(26682): ===createScript=== 06-03 09:55:09.869: E/RenderScript(26682): Unable to open shared library (/data/data/xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx//lib/librs.basefilter.so): Cannot load library: soinfo_relocate(linker.cpp:975): cannot locate symbol "_Z3dotDv3_fS_" referenced by "librs.basefilter.so"... 06-03 09:55:09.869: E/RenderScript(26682): Unable to open system shared library (/system/lib/librs.basefilter.so): (null) 06-03 09:55:09.869: D/AndroidRuntime(26682): Shutting down VM 06-03 09:55:09.869: W/dalvikvm(26682): threadid=1: thread exiting with uncaught exception (group=0x418b9e10) 06-03 09:55:09.869: E/AndroidRuntime(26682): FATAL EXCEPTION: main 06-03 09:55:09.869: E/AndroidRuntime(26682): android.support.v8.renderscript.RSRuntimeException: Loading of ScriptC script failed. 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.support.v8.renderscript.ScriptC.<init>(ScriptC.java:69) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:41) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:35) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:19) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:1) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.BaseRSFilter.createScript(BaseRSFilter.java:39) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.RSFilterEngine.addFilter(RSFilterEngine.java:76) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity.changeBeautyEffect(BeautyActivity.java:277) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity$2.onClick(BeautyActivity.java:100) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.app.AlertController$ButtonHandler.handleMessage(AlertController.java:166) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Handler.dispatchMessage(Handler.java:99) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Looper.loop(Looper.java:152) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.app.ActivityThread.main(ActivityThread.java:5132) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invokeNative(Native Method) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invoke(Method.java:511) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:793) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:560) 06-03 09:55:09.869: E/AndroidRuntime(26682): at dalvik.system.NativeStart.main(Native Method) Now, I will post some related infomation. project.properties ... renderscript.target=9 renderscript.support.mode=true sdk.buildtools=19.0.3 device info Brand: Asus Model: ME302C OS: 4.2.2 CPU: Intel(R) Atom(TM) CPU Z2560 @1.60GHz GPU Renderer PowerVR SGX 544MP Finally, by the way, the same code runs well on Galaxy s2, s4, note 2.

  Read the article

• Mobile Intel 965 vs 4 Series chipset speed differences

  - by graham.reeds

  A client of ours is having a problem panning on a mapping application that we write on their panasonic toughbooks (CF-19's). One of their toughbooks the panning is fairly smooth while on the other it is really slow. Doesn't help that they have all the settings turned up, but I would of thought any reasonably new graphics card (even shared memory) would have more than adequate graphic speed. I am pretty sure that the graphic adapter is to blame, but I can't find anything out about either chipset (level of acceleration, non-problems, etc). All I get is the intel data sheets. The faster panning one is on the Mobile Intel 4 Series Express Chipset while the slower is on the Mobile Intel 965 Express Chipset. Is this expected? Does it sound like a driver problem? They both have the same amount of ram and same cpu.

  Read the article

• Tuning MySQL to consume less memory

  - by Alex

  I have a VM which has 2GB Ram, (full specs) And I am setting up a site which has one table in particular with over a million records. There's little or no usage of this particular database (perhaps once or twice a day) but simply running mysql grinds the whole server to a halt. I've looked through the top results but nothing is really denting the CPU however the memory seems to be the issue. The site isnt even live of taking requests yet. the memory situation looks like this: # free -m total used free shared buffers cached Mem: 2006 1880 126 0 3 53 -/+ buffers/cache: 1823 183 Swap: 2047 345 1702 Are there any good pointers to tune mysql to stop hogging the system memory? Thanks very much EDIT: (requested by 8bit): http://tny.cz/b41a0b12

  Read the article

• Second Monitor "Input Not Supported"

  - by Drew

  I have two identical monitors (new Acer s211hl) with a native resolution of 1920x1080. When enabling dual monitor support in Windows 7, the primary monitor works as expected, but the second monitor says, "Input not Supported" and fails to display anything. If I change the resolution of the second monitor to 1440x900, it works as expected. Likewise, if I set it to 1920x1080 with a refresh rate of 30hz, the monitor displays video. However, neither of these are solutions, because the output looks very blurry, and the content is stretched. I am using the following hardware: Monitors: Acer s211hl Motherboard: Asus F1A75M-Pro CPU/GPU: AMD A8-3850 with integrated Radeon HD 6550D graphics I suspect that there is probably an issue with the integrated graphics or motherboard not being able to output to two 1920x1080 monitors, but I am hoping for official confirmation.

  Read the article

• Automatically detecting temperature sensors on startup (Ubuntu 10.10)

  - by dpitch40

  I am very close to achieving my goal of setting up a CPU temperature graph that is displayed in the top panel of my desktop. I have the applet and have gotten it to graph temperatures, which appear to be being sensed correctly. However, my machine doesn't find its temperature sensors by default; I have to run sudo modprobe coretemp for the sensors command to work, then log off and back in before the graph applet starts displaying my temperatures. I am wondering if I can somehow tell the kernel to load the coretemp module on startup so I don't have to keep doing these extra steps. I have tried putting this command in my startup applications, but I think its need for root permission is keeping this from working. Is there a way to set up startup applications with root permission, or some other way to ensure that this module is loaded at startup? If anyone is curious, I'm running 64-bit Ubuntu 10.10 on a Lenovo G770 laptop with a Core i5 processor and the 2.6.35 kernel.

  Read the article

• How do I troubleshoot a server I can't get logged into?

  - by Karl

  This morning I am unable to log into SQL Server because it appears to be busy doing something, so much so that CPU usage is constantly at 98%-99%. I am guessing that something has gone wrong with the maintenance plan that ran over the weekend, but I can't get into the error logs see what is happening. On logging in I keep getting messages like "insufficiently memory in the buffer pool" and "the server is not responding". Is there any way I can figure out what is happening without logging onto to the server? Or some way I can squeeze in a login?

  Read the article

• Home movie video browser

  - by Jim Hunziker

  I have a bunch of home movies that don't have useful filenames because they came straight off the camera. (I'm using Vista 64, by the way.) Picasa is pretty good for browsing through them and watching them, but it doesn't use my video card for rendering the videos. My CPU gets pegged at max usage, and full screen barely works. Windows Media Player or Quicktime works fine. Is there another application (like Picasa) that can be used for browsing through movies that both uses my video card and shows thumbnails of all the movies in my collection? I'd rather have something nicer than Windows Explorer. (The movies are h.264 AAC 1280x720.)

  Read the article

• What is a proper MySql replication configuration for frequent db updates and rare selects?

  - by serg555

  We currently have 1 master db on its own server and slave db on app server. App executes very frequent but light updates (like increasing counters), and occasional (once in a few minutes) heavy selects (which is the most important part of the app). When app was connected only to master db there were no performance issues. With slave db introduction CPU load avg on app server increased to about 6-10 during that heavy select period (from 3-4 as before). When server doesn't run those frequent updates it seems like performance for selects stays within the limits. So I have a feeling that those updates is what is causing the performance drop (also these frequent updates are not critical so if slave db doesn't have them in sync with master for some time it would be ok). What would be a good db replication setup for such kind of app? What are the replication parameters we could tweak? Thanks.

  Read the article

• Setting up Amazon Cloudwatch to get an alert when you server is down

  - by Saif Bechan

  I have an instance running on Amazon EC2 that I turned into a webserver. Now I have been looking at cloudwatch, but I do not know if it is the correct tool for the job. Basically I want to get informed when the server is down, for whatever reason. Maybe the server got hacked, or the server shut down for whatever reason, I want to get a notification on that. I have enabled clouwatch, and tried to set up a alert, but I only see things like network in-out or cpu usage, an d metrix. Now I do not know if these will do the trick.

  Read the article

• Very Hot P4 3.4 GHz

  - by Timothy R. Butler

  My Pentium 4 3.4 GHz is running hot even with a new fan on my case's heatsink (80mm rated at ~ 40 CFM). If I stress the CPU, it goes over Intel's maximum temperature rating. I'm contemplating putting in a "PCI cooler" (i.e. a fan that fits into an empty PCI slot) to see if I could get better airflow in the case. The slot isn't far from the processor and heatpipes that lead from the processor to the fan, so I'm hopeful this would help, but not entirely certain. Thoughts?

  Read the article

• HAProxy being killed with more that 54,000 connections

  - by Olly

  I am trying to run HAProxy (1.4.8) on a EC2 machine running Ubuntu 10.04. I need HAProxy to be able to handle many thousands of long-running persistent connections (websockets). With the current setup HAProxy gets killed at around 54,300 connections (roughly). If I am running HAProxy in the foreground, the only output is "Killed". Am I right in thinking this is the Kernel killing the process? Is this because it is out of resources? Can I increase the resources? The CPU and memory consumption are low with 50,000 connections, so I don't suspect either of these. How can I prevent this from happening?

  Read the article

• How would I measure the amount of RAM needed per Glassfish domain? [closed]

  - by oligofren

  Possible Duplicate: Can you help me with my capacity planning? In our test environment we have a lot of apps spread out over a few servers and Glassfish domains. To make versioning easier I would have liked to have one Glassfish domain per customer per app (kind of like a heavyweight version of lots of jetty instances). But I have heard that Glassfish is kind of heavy on the resources, and so I would need to measure approximately how many instances would fit in the available RAM. These are low-traffic/low load testing servers, so CPU is not really an issue, though RAM might be. How would I get an approximate measure of how much RAM is needed? This is one Glassfish 3 instance with one heavy EAR application deployed. top? jvmstats? ??

  Read the article

• Music player for ubuntu similar to iTunes

  - by Allwar

  Hi, I really like Itunes as a music player but i can't get it to work in ubuntu so I need another one! functions i want: shuffle, low cpu usage, a friendly interface and free of bugs. (friendly interface = esay to use) why not use rythmbox, well it has bugs, the shuffle button doesn't work because it shuffles the next song after each song. So when i use it it's just a big loop over three different songs! i want the itunes look, like it shuffles once and lets you see in what order the songs will be played. //Alvar

  Read the article

• High frequency, kernel bypass vs tuning kernels?

  - by Keith

  I often hear tales about High Frequency shops using network cards which do kernel bypass. However, I also often hear about them using operating systems where they "tune" the kernel. If they are bypassing the kernel, do they need to tune the kernel? Is it a case of they do both because whilst the network packets will bypass the kernel due to the card, there is still all the other stuff going on which tuning the kernel would help? So in other words, they use both approaches, one is just to speed up network activity and the other makes the OS generally more responsive/faster? I ask because a friend of mine who works within this industry once said they don't really bother with kernel tuning anymore-because they use kernel bypass network cards? This didn't make too much sense as I thought you would always want a faster kernel for all the CPU-offloaded calculations.

  Read the article

• Why does Oracle SQL Developer take so long to open?

  - by oscilatingcretin

  I think anyone who's used Oracle SQL Developer will agree that it's painfully slow on the load. My research has lead me to a solution that seems to have helped a little, and that's telling OSQLD not to check for updates on startup. However, it still takes several minutes to open. What could OSQLD possibly be doing during load time? Is there any way get it to open right away? Edit: Adding potentially relevant system specs: CPU: Intel i5-2520M 2.5 ghz Windows 7 32-bit RAM: 4 gb

  Read the article

• DisplayPort to DVI not working on Quadro FX 580

  - by kaosvid

  I have a PNY NVIDIA Quadro FX 580 graphics card with 1x DVI and 2x DisplayPorts. The DVI port works fine with both my Viewsonic monitors but I cannot get either of the DPs to work using the supplied DP to DVI adapter; all I get is a "no signal" on either monitor when connected to either DP port. The NVIDIA Control Panel shows that the second monitor is not connected when in fact it is. How do I get the second monitor to work? System: Windows XP Professional 32-bit Asus P5Q motherboard Core 2 Duo E8500 CPU 4GB PC8500 RAM

  Read the article

• Monitoring the wall time of a process on windows?

  - by Sean Madden

  Windows Task Manager has the ability to show the current CPU time of any given running process on windows, is there any way (not necessarily through Task Manager) to get the current wall time of a process? An example, let's say I have a script that reliably runs for about 45 minutes. Without adding a progress bar to the script, is there any way to figure out for how long it has been running? The math behind this seems pretty straight forward; WallTime = CurrentWallTime - WallTimeProcessStarted. Likewise, since the math is so simple, is there anyway to get the time that a process was started at?

  Read the article

< Previous Page | 155 156 157 158 159 160 161 162 163 164 165 166  | Next Page >