Search Results

Search found 5148 results on 206 pages for 'preconference programs'.

Page 161/206 | < Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >

• File transfer problems through VPN when Cisco IPS is enabled

  - by Richard West

  We have a Cisco ASA 5510 firewall with the IPS module installed. We have a customer that we must connect to via VPN to their network to exchange files via FTP. We use the Cisco VPN client (version 5.0.01.0600) on our local workstations, which are behind the firewall and subject to the IPS. The VPN client is successful in connecting to the remote site. However when we start the FTP file transfer we are able to upload only 150K to 200K of data, then everything stops. A minute later the VPN session is dropped. I think I have isolated this to an IPS issue by temporarily disabling the Service Policy on the ASA for the IPS with the following command: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 inactive After this command was issued I then established the VPN to the remote site and was successful in transferring the entire file. While still connected to the VPN and FTP session I issued the command to enable the IPS: access-list IPS line 1 extended permit ip 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 The file transfer was tried again and was once again successful so I closed the FTP session and reopened it, while keeping the same VPN session open. This file transfer was also successful. This told me that nothing with the FTP programs was being filtered or causing the problem. Furthermore, we use FTP to exchange files with many sites everyday without issue. I then disconnected the original VPN session, which was established when the access-list was inactive, and reconnected the VPN session, now with the access-list active. After starting the FTP transfer the file stopped after 150K. To me this seems like the IPS is blocking, or somehow interfering with the initial VPN setup to the remote site. This only started happening last week after the latest IPS signature updates were applied (sig version 407.0). Our previous sig version was 95 days old becuase the system was not auto updating itself. Any ideas on what could be causing this problem?

  Read the article

• Imagemagick PDF to JPG conversion failing

  - by Scott

  I'm trying to convert the first page of a PDF to a JPG. I'm pretty sure I got this to work with certain PDFs, but is it really possible that certain PDFs are made incorrectly and cannot be converted? I tried running this first: $ convert 10-03-26.pdf[1] test.jpg And I got the follow: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 convert: Postscript delegate failed `10-03-26.pdf'. Running this instead: $ convert -verbose -colorspace rgb '10-03-26.pdf[1]' test.jpg I get the following: Error: /syntaxerror in readxref Operand stack: Execution stack: %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- --nostringval-- Dictionary stack: --dict:1062/1417(ro)(G)-- --dict:0/20(G)-- --dict:73/200(L)-- --dict:73/200(L)-- --dict:97/127(ro)(G)-- --dict:229/230(ro)(G)-- --dict:14/15(L)-- Current allocation mode is local ESP Ghostscript 7.07.1: Unrecoverable error, exit code 1 "gs" -q -dBATCH -dSAFER -dMaxBitmap=500000000 -dNOPAUSE -dAlignToPixels=0 "-sDEVICE=pnmraw" -dTextAlphaBits=4 -dGraphicsAlphaBits=4 "-g792x1611" "-r72x72" -dFirstPage=2 -dLastPage=2 "-sOutputFile=/tmp/magick-XXU3T44P" "-f/tmp/magick-XXoMKL8Z" "-f/tmp/magic2eec1F"Start of Image Define Huffman Table 0x00 0 1 5 1 1 1 1 1 1 0 0 0 0 0 0 0 Define Huffman Table 0x01 0 3 1 1 1 1 1 1 1 1 1 0 0 0 0 0 Define Huffman Table 0x10 0 2 1 3 3 2 4 3 5 5 4 4 0 0 1 125 Define Huffman Table 0x11 0 2 1 2 4 4 3 4 7 5 4 4 0 1 2 119 End Of Image convert: Postscript delegate failed `10-03-26.pdf'. Why would the conversion fail? Just as an aside, this is happening on a (gs) Grid-Service on (mt) Media Temple hosting. I cannot install programs on the server, but both Imagemagick and Ghostscript are installed Thanks!

  Read the article

• How to do 'search for keyword in files' in emacs in Windows without cygwin?

  - by Anthony Kong

  I want to search for keyword, says 'action', in a bunch of files in my Windows PC with Emacs. It is partly because I want to learn more advanced features of emacs. It is also because the Windows PC is locked down by company policy. I cannot install useful applications like cygwin at will. So I tried this command: M-x rgrep It throws the following error message: *- mode: grep; default-directory: "c:/Users/me/Desktop/Project" -*- Grep started at Wed Oct 16 18:37:43 find . -type d "(" -path "*/SCCS" -o -path "*/RCS" -o -path "*/CVS" -o -path "*/MCVS" -o -path "*/.svn" -o -path "*/.git" -o -path "*/.hg" -o -path "*/.bzr" -o -path "*/_MTN" -o -path "*/_darcs" -o -path "*/{arch}" ")" -prune -o "(" -name ".#*" -o -name "*.o" -o -name "*~" -o -name "*.bin" -o -name "*.bak" -o -name "*.obj" -o -name "*.map" -o -name "*.ico" -o -name "*.pif" -o -name "*.lnk" -o -name "*.a" -o -name "*.ln" -o -name "*.blg" -o -name "*.bbl" -o -name "*.dll" -o -name "*.drv" -o -name "*.vxd" -o -name "*.386" -o -name "*.elc" -o -name "*.lof" -o -name "*.glo" -o -name "*.idx" -o -name "*.lot" -o -name "*.fmt" -o -name "*.tfm" -o -name "*.class" -o -name "*.fas" -o -name "*.lib" -o -name "*.mem" -o -name "*.x86f" -o -name "*.sparcf" -o -name "*.dfsl" -o -name "*.pfsl" -o -name "*.d64fsl" -o -name "*.p64fsl" -o -name "*.lx64fsl" -o -name "*.lx32fsl" -o -name "*.dx64fsl" -o -name "*.dx32fsl" -o -name "*.fx64fsl" -o -name "*.fx32fsl" -o -name "*.sx64fsl" -o -name "*.sx32fsl" -o -name "*.wx64fsl" -o -name "*.wx32fsl" -o -name "*.fasl" -o -name "*.ufsl" -o -name "*.fsl" -o -name "*.dxl" -o -name "*.lo" -o -name "*.la" -o -name "*.gmo" -o -name "*.mo" -o -name "*.toc" -o -name "*.aux" -o -name "*.cp" -o -name "*.fn" -o -name "*.ky" -o -name "*.pg" -o -name "*.tp" -o -name "*.vr" -o -name "*.cps" -o -name "*.fns" -o -name "*.kys" -o -name "*.pgs" -o -name "*.tps" -o -name "*.vrs" -o -name "*.pyc" -o -name "*.pyo" ")" -prune -o -type f "(" -iname "*.sh" ")" -exec grep -i -n "action" {} NUL ";" FIND: Parameter format not correct Grep exited abnormally with code 2 at Wed Oct 16 18:37:44 I believe rgrep tried to spwan a process and called 'FIND' with all the parameters. However, since it is a Windows, the default Find executable simply does not know how to handle. What is the better way to search for a keyword in multiple files in Emacs on Windows platform, without any dependency on external programs? Emacs version: 24.2.1

  Read the article

• Windows Server 2008R2 - can't change or remove the default gateway

  - by disserman

  We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

  Read the article

• MacBook Pro battery capacity 65K mAh

  - by Alexander Gladysh

  I have a 15" MacBook Pro 3.1 (that is Late 2007 model AFAIR). I've bought it new a couple of years ago. Recently its on-battery power lifespan became very short (30 to 10 minutes). When my notebook turns itself off due to "low battery" and I press the small button on the battery itself, all LED lights are alight, indicating full charge. When I plug in the power adapter, my Mac displays that "battery is fully charged, finishing charging process" (I have a Russian OS X 10.5.7, so that is a rough translation), but the LEDs on battery itself display (seemingly accurate) status that there are one or two "LEDs still not charged". My battery have as few as 37 recharge cycles (yes, I've neglected calibration over the time I've used it). Battery info programs like iBatt2 report battery capacity of 65 337 mAh (with by-design capacity of 5600 mAh). I get it that something went wrong with battery electronics. I've tried resetting my Mac's PRAM and SMC, it did not changed anything. Now I'm trying to recalibrate the battery, but looks like it does not help as well. Will try to recalibrate it several times in a row. I'd buy a new battery if I knew if it is battery fault, not a notebook's. Any suggestions? Update: After recalibration, my battery status now displays battery capacity of 1500 mAh. But with every recalibration (or simply when I use notebook without power adapter plugged in) this number changes in the range from 200 mAh to 1700 mAh. LEDs on battery now are synchronous with what nodebook thinks on the charge level. Also I've noticed that cycle count changes rather slowly. It is now 39, it was 37 when I've started recalibration, and I went through the process at least ten times... So, the main question is: does it look like that replacing the battery would help me (or does it look like this is notebook's problem)? I guess I should try replacing the battery.

  Read the article

• Linux Distro for Beginners

  - by XLR3204S

  Well... I know that's the question arising all over the Internet, but I couldn't find an answer to suit me after googling for quite some time. I'd like to get a Linux distribution, and start learning using the CLI. I'm looking for a distribution already having GNOME installed, as I'll be using Linux-Command.org as my learning resource, and I'm not very familiar with CLI-based web browsers. I'd mainly like to get to know my way around a UNIX-based system, and then I think I'd like to pick up a CLI-only distribution, and start doing more complex stuff. I've tried Ubuntu, Fedora Core, OpenSolaris and FreeBSD (the last two aren't linux distros, I know). Ubuntu and FC are fine, they do come with Firefox, but I'm not really sure they're meant for learning purposes. OpenSolaris was OK as well, but I haven't got to play with it enough. FreeBSD 7.2 did not want to install itself on my 13" MacBook Pro, it generated a kernel panic everytime while copying the files to the disk. So to sum this up, I'm trying to learn Linux, and I'm willing to invest time into this (that is, not giving up when the first problems arise). I also have intermediate knowledge of C++, if it helps, and I'm also using the CLI-vim to write small C++ CLI-based programs, so text editing should be any problem. And... speaking of Macs, how am I going to be limited if I try to learn how to use UNIX-based systems using the OS X Terminal? It uses bash 3.2, isn't this the same shell as the one found on most of the Linux machines? How does the fact that OS X is based on FreeBSD 4.4, if I'm not mistaking, affect this? Thanks in advance, and hopefully, I'll have a starting point ASAP.

  Read the article

• Windows 7 search doesn’t find text strings

  - by Hugh Tash

  I’m not able to find any text strings starting not from the beginning of word in filename or in file content using Windows 7 search. My Windows 7 search configuration: Let’s say I’m searching for a documents containing word “content”. I’m able to find those documents when searching for “content”, “conte”, “con” (as long as the string includes the beginning of the word). "content" "con" But if I search for “ontent”, “tent” or any other combination that doesn’t include the beginning of the word, Windows search won't find it. I've tried other indexing/searching software such as Copernic Desktop search, Google desktop search. Those programs also weren’t able to find part of the word starting from the middle of the word. For instance, it finds “conte”, but doesn’t find “onte”. Finds “conte” Doesn’t find “onte” I got the same problem using Copernic desktop search. On the other hand, when I use non-indexing content search software such as Agent Ransack or FileSeek, I get the same results when searching for “conte” or “onte”: “conte” “onte” Why do all pre-indexing content search applications (Windows search, Google desktop, Copernic desktop search) fail to search for a string inside the words? Why do non-indexing applications find text strings wherever they are: in the beginning, middle or end of the word? I’ve tried wildcards and other constructions with no luck. *onte onte “onte” content:onte content:onte content:~onte All these searched doesn’t find the word “content”. How can I make Windows search find strings from any part of words? Could you try these searches and see if they work for you? Or is this normal behavior? Thank you. Update: Using wildcards before or after "onte" doesn't find any results. content:~=onte doesn't find any results.

  Read the article

• ZFS - zpool ARC cache plus L2ARC benchmarking

  - by jemmille

  I have been doing lots of I/O testing on a ZFS system I will eventually use to serve virtual machines. I thought I would try adding SSD's for use as cache to see how much faster I can get the read speed. I also have 24GB of RAM in the machine that acts as ARC. vol0 is 6.4TB and the cache disks are 60GB SSD's. The zvol is as follows: pool: vol0 state: ONLINE scrub: none requested config: NAME STATE READ WRITE CKSUM vol0 ONLINE 0 0 0 c1t8d0 ONLINE 0 0 0 cache c3t5001517958D80533d0 ONLINE 0 0 0 c3t5001517959092566d0 ONLINE 0 0 0 The issue is I'm not seeing any difference with the SSD's installed. I've tried bonnie++ benchmarks and some simple dd commands to write a file then read the file. I have run benchmarks before and after adding the SSD's. I've ensured the file sizes are at least double my RAM so there is no way it can all get cached locally. Am I missing something here? When am I going to see benefits of having all that cache? Am I simply not under these circumstances? Are the benchmark programs not good for testing the effect of cache because of the the way (and what) it writes and reads?

  Read the article

• How to stop SophosAV from scanning directories under source control

  - by user26453

  From googling it seems its well known that SophosAV as well as other AV programs have issues with how they interact and can inhibit source control utilities like TortoiseHG or TortoiseSVN. One solution is to exclude directories under source control from on-access scanning as detailed here on Sophos's support site. There is a corollary article that mentions some issues related to this, namely need to place multiple entries for exclusions based on the possibility of the location being accessed through the short vs. long name (e.g., Progra~1 vs. "Program Files"). One other twist is I am using a junction to relocate my user directory, C:\Users\Username, to a second hard drive, E:. Since I am not sure how this interacts I have included the source control directory as they are nested in both locations. As a result, I have included the two exclusions for the on-access scanning exclusions (and to be on the safe side on-demand exclusions as well, although this should only come into play when I select a parent directory of the exclusion to be scanned on-demand, but still). You'll notice I have no need to add extra exclusions for those locations based on short vs. long name distinctions. The two exclusion I have then, for both on-access and on-demand scanning exclusions are: C:\Users\Username\source-control-directory E:\source-control-directory However, this does not seem to work as TortoiseHG still lags terribly in response to any request as AV software starts scanning when the directory is accessed via TortoiseHG. I can verify without a doubt that Sophos is causing the problems: I can completely disable on-access scanning. Once this is done TortoiseHG responds very fast to all operations. I cannot leave this disabled obviously, but since the exclusion don't seem to be working, what next?

  Read the article

• Java plugin in the browser doesn't work even though it is enabled

  - by Pratyush Nalam

  I installed the Java Development Kit (64-bit) recently and saw it includes the JRE plugin for 64-bit as well. But, since Firefox is 32-bit, I also installed JRE 32-bit version. This is what is shown in Programs and Features. Now, the problem is, the other day, I opened a site which required the Java plugin. The frame showed the regular Java loading animation and hung. Nothing happened after that. Like this: I checked Firefox's plugins section and it shows Java is enabled, so no issue there I tried other browsers - IE10 and Chrome but to no avail. It doesn't work anywhere. I saw another question which said that you have to install 64-bit then 32-bit. That's what I actually did as well. First, installed JDK 7 64-bit (which includes JRE 7 64-bit) and then installed JRE 7 32-bit. I even tried the Java website's Do I have Java? section and over there too, it just keeps spinning for ages (I have waited for more than 10-20 seconds). How do I go about now? This never happened to me in Windows 7. I am on Windows 8 Pro.

  Read the article

• Files Corrupted on System Restore

  - by Yar

  I restored OSX 10.6.2 today (was 10.6.3 and not booting) by copying the system over from a backup. The data directories were not touched. I am seeing some files as 0 bytes, and getting permission-denied errors when copying, even when using sudo cp or the Finder itself. Some programs, differently, take the files at face value and see no permission problems (such as zip), but they see the files as zero bytes, which would be game-over for recovery. cp: .git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: could not copy extended attributes to /eraseme/blah/.git/objects/fe/86b676974a44aa7f128a55bf27670f4a1073ca: Operation not permitted I have tried sudo chown, sudo chmod -R 777 and sudo chflags -R nouchg which do not change the end result. Strangely, this is only affecting my .git directories (perhaps because they start with a period, but renaming them -- which works -- does not change anything). What else can I do to take ownership of these files? Edit: This question comes from StackOverflow because I originally thought it was a GIT problem. It's definitely not (just) GIT. Anyway, this is to help put some of the comments in context.

  Read the article

• Backup program for Windows using non-proprietary format?

  - by Cristi Diaconescu

  I'm looking at the various local backup programs for windows, and I was wondering which of them use a non-proprietary backup format? By non-proprietary, I mean I want to be able to access at least the latest version of the backed up files either directly, or by using an open-standard format like zip/7z/rdiff... The other thing I'm looking for in a backup program is the ability to create incremental backups. What I have found so far: SyncBack copies files as-is, using separate directories for versioning pretty much the same for all the 'roll you own' task scheduler + rsync/xcopy32/robocopy/MS SyncToy/etc solutions GFI Backup appears to be using Zip files, at least in their 'Business' version, not sure about the free 'Home' version. Didn't try it yet, but it's next on my list. Mozy (!) supports local backup starting with v 2.0 and basically provides a 2nd local copy on a separate partition. Subjectively, it feels slow and resource intensive (I think it took more than a week to finish the first local backup of ~ 300 GB), and does not appear to offer file versioning (arguably, you can get older file versions online). On the positive side, it looks like the local backup is integrated in the restore process which was traditionally a masochistic experience (and this goes for any online backup provider). Other suggestions? I favor ease of use over tons of options (e.g. SyncBack is very flexible but it offers sooo many ways to shoot yourself in the foot...)

  Read the article

• Disabling mouse acceleration in Mac OS X

  - by aib

  I've been looking for a solution to the unusable mouse problem in Mac OS X for ages. I've tried a gazillion programs and fiddled with every setting there is or there can be added. So far, I haven't found a way to get linear mouse response in Mac OS X. At this point I'm seriously considering installing another operating system. But before I do that, or go hacking around OS binaries, maybe someone here has a solution? I want linear mouse response. I want high sensitivity. I like my touchpad acceleration and would like to keep it if possible. Any ideas? P.S. I've been at this for a long time, I'll probably have already tried the most popular answers. I'm running Mac OS X 10.6.5 on a MacBook Pro. I don't use a particular brand of mouse. I'm not looking for any commercial solutions. I've tried: Mouse Acceleration Preferences Pane, the Snow Leopard version of which can get me close to a linear response, but at the cost of tracking speed (sensitivity). Answers on this question: Make Mac OS X mouse acceleration more Windows-like About every code snippet I found via Google.

  Read the article

• Is there a way to tell SGE to run specific jobs as root on the execution node?

  - by Rick Reynolds

  The title kinda says it all... We're using SGE/OGE to submit jobs to a set of worker nodes that then do things with specific pieces of equipment. The programs and scripts that have been created that manipulate this equipment rely on running as root. I'd like SGE to handle allocation of resources in a way that is mindful of users, groups, projects, etc., but I also need the actual jobs to run with root permissions. I've read up on How can one run a prologue script as root in gridengine? to see if anything there was pertinent, but it seems that SGE is providing the "user@" kind of spec specifically for prolog and epilog kinds of actions. Is there any similar functionality for the job itself? I'm aware of su/sudo approaches, but that won't really work in this environment because the sudoers file isn't globally managed (i.e. I'd have to add a whole set of users to /etc/sudoers on lots of machines). I'm currently looking into a setuid kind of solution, but that would definitely be an unnecessary kind of work-around if SGE provides me a way to declare that a specific job (or jobs in a specific queue) always needs to run with a specific user's rights.

  Read the article

• Staying anonymous while hosting your site?

  - by jamesCroft

  I don't mean anonymous surfing. I mean hosting and having your own domain and such. The reason is that my blog is about religious/political topics which may cause me trouble in the future. This is the domain I am working on: www.james-croft.com I know that using Whois search my name can come up: http://www.networksolutions.com/whois-search/james-croft.com The solution to that, as far as I understood, is to buy a privacy package from the domain registrar. in my case it is lucky register: http://i.stack.imgur.com/uvOdc.png Also hosting is a concern. I use the same hosting service for multiple websites. My question is this: Can my hosting be tracked and be used to identify me? Also: Are there other methods of finding out my identity from either Google Adsense or Amazon affiliate programs? I couldn't find any relevant articles online. If there is anything else that is relevant, please let me know. I appreciate any response.

  Read the article

• How do I fix libdispatch problem crashing Mac OS X apps?

  - by david-ocallaghan

  In the last day I have started having a lot of brokenness on my Mac (MacBook Air running Mac OS X 10.6.2 with all software updates). Most noticably, iTunes no longer syncs with my iPhone. It fails with a crash dialog reporting "AppleMobileDeviceHelper quit unexpectedly" and an error dialog "iTunes was unable to load dataclass information from SyncServices. Reconnect or try again later." I've attempted the fix at support.apple.com/kb/HT1747 but it failed. I've also been having problems (at first seemingly unrelated) with the horrible Cisco VPN client, which started giving me this error: Error 51: Unable to communicate with the VPN subsystem I followed the steps at www.anders.com/cms/192/CiscoVPN/Error.51:.Unable.to.communicate.with.the.VPN.subsystem which don't seem to work for me, although I can connect if I use the command line with sudo : sudo vpnclient connect MyProfile I had a look in the Console app at the diagnostic messages and I noticed a pattern, that a number of apps were reporting "BUG IN CLIENT OF LIBDISPATCH". The affected programs are: AppleMobileBackup AppleMobileDeviceHelper Safari Webpage Preview Fetcher cvpnd (the Cisco VPN daemon) Of these, only the last is non-Apple software! The common text in the diagnostic messages is: Exception Type: EXC_BAD_INSTRUCTION (SIGILL) Exception Codes: 0x0000000000000001, 0x0000000000000000 Crashed Thread: 1 Dispatch queue: com.apple.libdispatch-manager Application Specific Information: BUG IN CLIENT OF LIBDISPATCH: Do not close random Unix descriptors I'm beginning to wonder if there's a permissions problem, or corruption of an important library, ... I should note that I've rebooted several times and verified the disk permissions and the disk. Any help would be great!

  Read the article

• Inexpensive, simple screen recording application for mac

  - by donut

  I am more and more consistently running into the need to create screencasts (record my screen) for clients to show them how to use programs or websites. Up until now I've been using Jing and it's been wonderful. But I would like something that can give me something less annoying than a .swf. A .mov or, best of all, something that plays without fuss on Mac and Windows. Also, the 5-minute limit is annoying, but not show stopping. Basically, I'd like to be able to actually give them the file on a CD or something instead of relying on whatever host I use staying up for eternity. To sum up, here's what I require: Record a portion or all of the screen. Records audio from mic while recording screen. Exports files easily playable on Mac and Windows (requiring Quicktime is okay, but not ideal) Will work on Mac OS 10.5+ Allows recording videos of at least 5 minutes. Text in recorded videos is easily readable when exported. Bonuses points for: Records videos greater than 5 minutes Exported videos will work in Windows Media player without any fuss. I haven't upgraded to Snow Leopard yet but I know it has some screen recording stuff built in but I don't know if it would be sufficient or not. The reason I say, "simple" is because most of the applications I've seen do much more than I need (I mean, Jing is nearly perfect for my needs) and cost more than I would like to spend.

  Read the article

• Openpgp does not work in my Thunderbird-Installation

  - by zerozero

  Hello community, as mentioned above - i encountered serious troubles. here are the versions of the related software: SuSE 11.2, Thunderbird v.3.1.6, released October 27, 2010, Firefox 3.6 v3.6.12 I created an installations with an own partition both for the user and for the TB-Mails. For a new installation on another hardware i took these partitions. When i wanted to read the emails, i got an error-message like this: The GPG-agent for your GnuPG-version 2.0.12 couldn´t get started Further i got an error message for the access on services of enigmail. The file jar:file:///usr/lib/mozilla/extensions/{3550f703-e582-4d05-9a08-453d09bdfdc6}/{847b3a00-7ab1-11d4-8f02-006008948af5}/chrome/enigmail.jar!/locale/de-DE/enigmail/help/initError.html couldn´t get found. I found out, that this path doesn´t come from TB nor from firefox, but from enigmail. I installed several (un-)pack-programs. the only effect was, that in the menu of TB the entry for OpenPGP appeared in the TB-Menu. The errors as described above repeat at every try to read an email. I deleted and re-installed enigmail, but the errors dont´t disappear. What can i do to get rid these error-messages ? Thanks in advance

  Read the article

• How powerful of a PC do you need to edit HD videos?

  - by Xeoncross

  I have a Core2Quad Q8200 (2.3GHz) with 4GB of RAM, a 512MB PCIe video card, and a SATA-2 HD. Yet it still isn't fast enough to edit 720i/p video in Sony Vegas or Adobe Premiere/Aftereffects. My RAM usage never peaks over 1.6GB, but my CPU cores make it to 95% quick! Right now the preview panes in all these programs lag to bad to actually work on the videos. I get to see 1-3 frames every second or two! So how fast do I have to go? At what point will my CPU be fast enough to actually edit these videos? I have to assume that regular people and their regular sub $2k computers can actually work with this footage. Another way to answer this is, how fast is the PC you used to edit videos? Update: I'ts worth noting that now that I have Adobe Pre/AF CS4 I am more interested in getting that working than my older Vegas 6. If you didn't have to re-run RAM preview every, single, time you made one change it would be my answer. But since I like to test many filters and effects before choosing one - I have to re-render a 1-sec section of footage over-and-over and it drives me nuts waiting. Perhaps a motherboard with Dual Xeon chips or something would be able to handle this. It would probably be as much as a dual-crossfire setup and would also speed up other applications.

  Read the article

• Memory leak in Google Chrome

  - by jasondavis

  As a developer it is very common for me to have 2-3 different IDE's open, 10-15 google chrome windows which can hold up to 200 open tabs (I know I get out of hand some times), Photoshop, couple twitter bots for promo, and a few other programs but my system still runs fast and smooth. I have an i7 processor with 12gb ram. Now with all my usual stuff running my Physical memory is usually running around 50-60% however over the course of the day or much less even, I will gradually grow to 98% The highest Memory usage processes will be from Google Chrome, if I sort in the task manager by highest memory usage and end the 1 highest process which will be a google chrome one, my memory usage will jump back down to about 60%. Also by ending that 1 process, all my Chrome windows will remain open and in use, so it doesn't affect me at all by ending that process. Based on this research I am assuming that that 1 runaway process is likely the Adobe Flash as I also can say that it gets up to the 98% much faster when I am using flash items like video or music player. But even without using any of them it will still climb up to that high number eventually. Has anyone else experienced similar results?

  Read the article

• Commandline program to extract archives with automatic subdirectry detection

  - by ??????

  The title already says it. What I'm looking for is essentially the pure commandline counterpart to ark -ba <path> (on KDE), or file-roller -h <path> (on GNOME/Unity). Unfortunately, both ark and file-roller require X to be running. I'm aware that it is relatively simple to write a tool that detects archives based on their file extension, and then runs the appropiate program: #!/bin/bash if [[ -f "$1" ]] ; then case $1 in *.tar.bz2) tar xjvf $1 ;; *.tar.gz) tar xzvf $1 ;; *.bz2) bunzip2 $1 ;; *.rar) rar x $1 ;; *.gz) gunzip $1 ;; *.tar) tar xf $1 ;; *.tbz2) tar xjvf $1 ;; *.tgz) tar xzvf $1 ;; *.zip) unzip $1 ;; *.Z) uncompress $1 ;; *.7z) 7z x $1 ;; *) echo "'$1' cannot be extracted with this utility" ;; esac else echo "path '$1' does not exist or is not a file" fi However, that doesn't take care of subdirectory detection (and in fact, many extraction programs do not even supply such an option). So might there be a program that does exactly that? I wasn't sure whether or not to ask on askubuntu.com, because this question isn't really about Ubuntu, but rather about any Linux operating system. My apologies if this question does not fit in here.

  Read the article

• Remote Sending of Emails via SMTP/EXIM Issue

  - by Christian Noel

  I have been encountering a problem when sending messages via EXIM. Here is the scenario: I have 2 servers lets just say host1.com = where all my apps and programs are hosted. host2.com = is another server which handles some apps but is also my smtp mail server. whm and cpanel are installed in both hosts as well as exim. right now, messages are being sent out as [email protected] to clients. host1.com uses the [email protected] so that it can send messages outbound as well. here's the problem, after a few hours from a fresh reboot of host1.com, sending messages from host1.com is no longer possible because i encounter an error that states: system/vendor/swift/Swift/Connection/SMTP.php [309]: The SMTP connection failed to start [tls://mail.host2.com]: fsockopen returned Error Number 110 and Error String 'Connection timed out'` also note that this was working fine earlier (like 10 hours ago) but then it suddenly fails. everytime i restart the host1.com then sending messages will work again. i have checked logs and traces but to no avail the only means of fixing this problem is restarting host1.com.

  Read the article

• Windows 7: Windows Firewall: Logging/Notifying on Outgoing Request Attempts

  - by Maxim Z.

  I'm trying to configure Windows Firewall with Advanced Security to log and tell me when programs are trying to make outbound requests. I previously tried installing ZoneAlarm, which worked wonders for me with this in XP, but now, I'm unable to install ZA on Win7. My question is, is it possible to somehow monitor a log or get notifications when a program tries to do that if I set all outbound connections to auto-block, so that I can then create a specific rule for the program and block it.? Thanks! UPDATE: I've enabled all the logging options available through the Properties windows of the Windows Firewall with Advanced Security Console, but I am only seeing logs in the %systemroot%\system32\LogFiles\Firewall\pfirewall.log file, not in the Event Viewer, as the first answer suggested. However, the logs that I can see only tell me the request's or response's destination IP and whether the connection was allowed or blocked, but it doesn't tell me what executable it comes from. I want to find out the file path of the executable that each blocked request comes from. So far, I haven't been able to.

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• Cannot run logwatch due to Date::Manip issue

  - by Quintin Par

  I tried to run logwatch at follows [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined. My date is as follows root@machine cron.daily]# date Thu Aug 23 06:25:21 GMT 2012 Now based on details in various forums I tried to fix this by setting /etc/timezone to “+0800” but it didn’t work My /etc/localtime points to /usr/share/zoneinfo/GMT and is managed by puppet How do I go about fixing this? I still want all my machines to be in GMT timezone. EDIT: Sadly, Both the changes are not working: [root@machine cron.daily]# cat /etc/TIMEZONE UTC Quanta’s [root@machine cron.daily]# cat ~/.bash_profile # .bash_profile # Get the aliases and functions if [ -f ~/.bashrc ]; then . ~/.bashrc fi # User specific environment and startup programs PATH=$PATH:$HOME/bin export TZ=GMT export PATH [root@machine cron.daily]# source ~/.bash_profile [root@machine cron.daily]# ./0logwatch ERROR: Date::Manip unable to determine TimeZone. Execute the following command in a shell prompt: perldoc Date::Manip The section titled TIMEZONES describes valid TimeZones and where they can be defined.

  Read the article

< Previous Page | 157 158 159 160 161 162 163 164 165 166 167 168  | Next Page >