Search Results

Search found 3674 results on 147 pages for 'floppy drives'.

Page 17/147 | < Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >

  • Getting access to physical drives in ESXi v5.5 installation on Dell PowerEdge R710 with PERC 6/i

    - by Big-Blue
    I've acquired a Dell PowerEdge R710 server a few days ago, which includes a PERC 6/i RAID controller. The server is now fitted with a SATA SSD, one SAS drive and four SATA HDD's, all of which I would like to be passed through to ESXi in an "as-is" state, without creating any logical drives in the RAID controller. Now, the ESXi v5.5 installation image I grabbed from the Dell homepage starts just fine but only lists the logical drives and connected flash drives as possible installation targets, not any of the physical drives. If I create a small logical drive on my SSD (which the PERC 6/i detects as SATA-SSD type), the ESXi install wizard lists the SSD value on that drive as false; which is far from optimal. I have also tried disabling the RAID controller entirely in the setup, but that also did not help. Everything that should enable passthrough is enabled in BIOS, but that shouldn't be a concern at this early stage of the ESXi installation. How would I be able to install ESXi v5.5 to a part of my SSD that is connected to the storage controller, while giving it entire physical access to the disk (to allow for SMART values to be read etc.)?

    Read the article

  • Would an array of SSD drives be able to succesfully substitute the system memory?

    - by Florin Mircea
    I watched a few videos trying to answer this. This video (youtube.com/watch?v=eULFf6F5Ri8) shows a bunch of guys stacking 24 SSD's reaching a peak of around 2GBps r/w. That's under the limit of the worst DDR3 in this list (memorybenchmark.net/write_ddr3_amd.html) - that shows DDR3 memory performance varying from 2.78 to 6.55 Gb per second, but that video is over 3 years old. This video (youtube.com/watch?v=27GmBzQWwP0) shows a more optimistic situation, but for PCI-E SSD drives: 5 drives peaking at around 4Gb. And this other video shows that stacking up more than 3 SSD's doesn't realistically offer a substantial added performance. This and the fact that in all benchmarks the drives act quite poorly when dealing with small files (5k file read/write averaging from 10MB to around 30-40MBps) as opposed to how native memory handles such files, seems to indicate a definite NO to this question. Also, the write life cycle is indeed limited and the drives might wear out quickly, as kindly pointed out by paddy. However, I wanted to get more opinions on this. Would it be possible to at least obtain current memory performance with SSD's in RAID 0? And if so, in what circumstances? I am assuming using this configuration with a Windows OS that has a memory pagefile resident to that stack of SSD's, thus making it very fast to work with.

    Read the article

  • System will not boot without USB thumb drive inserted

    - by agent154
    I've had this issue before when trying out Linux Mint, but I was unable to get any assistance. I was then lead to believe that it was a problem related to Mint, and not grub. I installed Ubuntu 12.04 tonight on a second partition alongside Windows 7. I installed from a USB stick, and everything went peachy until I rebooted without the stick in my tower. It now says: error: no such device: 20cec6ca-4024-4237-84c3-2dba3c851497 grub rescue > I've verified via ls -l /dev/disk/by-uuid that my drive where Ubuntu is installed matches the UUID that supposedly doesn't exist. The UUID of my thumb drive when inserted happens to be 06B3-9C68. There is no mention of my USB drive's UUID anywhere in /boot/grub/grub.cfg I've also tried to re-install GRUB after booting into my system, removing the stick, and running grub-install /dev/sda. It still happens, and I cannot boot without the USB drive inserted into the computer. And what really gets my goat is that the boot order of my system is CDROMHard DriveUSB. It's not even reaching the USB to try to boot from it, so why does it matter that it's not there? Edit: Also, I ran grub-config without the stick in followed by another grub-install. Still no go. FWIW, here's my grub.cfg file: # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 set locale_dir=($root)/boot/grub/locale set lang=en_CA insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-25-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-25-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-25-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 echo 'Loading Linux 3.2.0-25-generic-pae ...' linux /boot/vmlinuz-3.2.0-25-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-25-generic-pae } submenu "Previous Linux versions" { menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-23-generic-pae } menuentry 'Ubuntu, with Linux 3.2.0-23-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 echo 'Loading Linux 3.2.0-23-generic-pae ...' linux /boot/vmlinuz-3.2.0-23-generic-pae root=UUID=20cec6ca-4024-4237-84c3-d2ba3c851497 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-23-generic-pae } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd1,msdos5)' search --no-floppy --fs-uuid --set=root 20cec6ca-4024-4237-84c3-d2ba3c851497 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 9014706714705268 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • Grub won't boot windows after update from 11.10 to 12.04

    - by Holger
    thanks for your time and reading this, here's the deal: i upgraded from 11.10 to 12.04 and everything worked out until i rebooted, i had 11.10 sucessfully running as a dual boot with windows vista. when i rebooted, my GRUB was shot to hell, what ever option i selected it said partion not found or something similar... booting into a live version on a thumb drive and running bootrepair from there fixed the issue... but only for ubuntu, when i try to boot into windows it only goes back to GRUB. i'm not at home, and heres a list of what i have here with me... 1 4gb thumb drive, empty 1 8gb thumb drive, windows vista installer bootable 1 old laptop, the one i try to save, optical drive is not existent 2 Mbps internet connection can you help me get back into my windows without having to reinstall windows? or at least show me a way how to use my illustrator through a virtual machine or something? here's my grub cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e set locale_dir=($root)/boot/grub/locale set lang=de_DE insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, mit Linux 3.2.0-24-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-24-generic } menuentry 'Ubuntu, mit Linux 3.2.0-24-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.2.0-24-generic wird geladen …' linux /boot/vmlinuz-3.2.0-24-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.2.0-24-generic } submenu "Previous Linux versions" { menuentry 'Ubuntu, mit Linux 3.0.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro quiet splash $vt_handoff initrd /boot/initrd.img-3.0.0-19-generic } menuentry 'Ubuntu, mit Linux 3.0.0-19-generic (Wiederherstellungsmodus)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e echo 'Linux 3.0.0-19-generic wird geladen …' linux /boot/vmlinuz-3.0.0-19-generic root=UUID=1063e402-b14f-45e5-92b6-d20a2e3a717e ro recovery nomodeset echo 'Initiale Ramdisk wird geladen …' initrd /boot/initrd.img-3.0.0-19-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 1063e402-b14f-45e5-92b6-d20a2e3a717e linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows Vista (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 2C9E66B39E6674EC chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ###

    Read the article

  • From the Tips Box: Xbox Output on Two Screens, High Tech Halloween Props, and Old Flash Drives as Password Reset Disks

    - by Jason Fitzpatrick
    Once a week we round up some great reader tips and share them with everyone, this week we’re looking at outputting your Xbox 360 to two screens, spooky high-tech Halloween props, and recycling old flash drives as password reset disks. HTG Explains: What is the Windows Page File and Should You Disable It? How To Get a Better Wireless Signal and Reduce Wireless Network Interference How To Troubleshoot Internet Connection Problems

    Read the article

  • What causes "All-in-one USB Card Reader" to create 6 drives that always appear in Disk Management?

    - by tim11g
    I installed a "All-in-one USB Card Reader" to read SD cards and other media. It has caused six new drives to appear in Disk Management with six new drive letter assignments. These drives and letters are always present, even when there are no cards in the reader. When unused, they are labeled "No Media". Why does this multifunction reader cause these phantom Disks to appear and consume drive letters? Every USB port can (and does) allow removable media to be mounted and assigned a drive letter, and the drive letter assignment "disappears" when the USB drive is removed. Why are these card reader's drives and letters staying allocated permanently? Is there anything that can be done to make the slots work like a typical USB drive? (The reader is in fact connected to USB).

    Read the article

  • Is there anyway to build a raid system without all drives?

    - by xenoterracide
    I'm building a raid1 (ok it will probably be a raid10,f2 but the difference with 2 drives... isn't much) system with 2 1TB drives. However, 1 of the drives I've ordered is bad so I'm RMA-ing it. I'm wondering if I could partition and install to the 1 drive and then rebuild the array when I get the second drive (after I test it of course) My initial investigation doesn't show me a way of creating the array without specifying all devices... and the device the second drive will be is one that has data that I will need to migrate (plus it's not big enough). Is it possible that I could create an array without specifying all devices? or specify false ones and reconfigure to the right ones later? Or some other method I'm not thinking of.

    Read the article

  • SATA controller installed but not working? (No drives show up/Don't see card's BIOS)

    - by johnnycakes
    Hi, I have an old Promise FastTrak S150 TX4 SATA controller card. I put it in an old machine running Windows Server 2003. I booted the machine. The new hardware was detected. I installed the drivers. So now in Device Manager under "SCSI and RAID Controllers" I see "Win Server 2003 Promise FastTrak S150 TX4 Controller" and "Win Server 2003 Promise RAID Console SCSI Processor Device" I previously had the card in a machine that is now dead. When I booted that machine, during the boot process I would see the card info displayed and the drives that were attached. Boot would finish and my drives would be available. When I boot this new machine I never see that screen/text. No hard drives are available/visible. What am I missing? Thanks.

    Read the article

  • What are the Windows G: through Z: drives used for?

    - by Tom Wijsman
    In Windows you have a C: drive. The first things labeled beyond that seems to be extra stuff. So my DVD drive is D: and if you put in a USB stick it becomes F:. And then some people also have A: and B:. But then, what and where are G: through Z: drives for? Is it possible to connect so many things to a computer to make them all in use? Or more than them? Would it give a BSOD? Or would this slow down the system somehow? Or what would happen? What if I want to connect even more drives to the computer? Because with the hard drive limits it's more efficient to buy more drives than to buy a single drive with a lot of capacity. Is it possible to create drive letters like 0: through Z: or AA: through ZZ:?

    Read the article

  • 5 x 3GB drives and 4 x 1500GB drive best raid setup?

    - by Zen_Silence
    Hello, I am building a file server my plan is the have the Operating system on one raid partition and the data storage on another partition. I currently have 5 x 3GB IDE drives that i would like to put the operating system on theses drives are old but that doesnt matter to me at the moment i have a ton of them so for this raid partition i would probably want to be able to pull out dead a drive and rebuild the array. My file partition is going to consist of 4 x 1.5TB SATA drives I would like the maximum storage with some redundancy. Any suggestions to which Raid level i should use would be greatly appreciated and if you could also suggest a PCI or PCI-e raid controller to handle theses arrays. Thanks in Advance, Zen_Silence

    Read the article

  • ASUS P5B Plus motherboard - no any drives found - how to restore RAID array?

    - by Moha
    We have a small server machine with an ASUS P5B Plus motherboard and 4 SATA HDDs. The HDDs were configured in a RAID10 array. Up until now, everything worked fine, but now the system doesn't recognize the drives. BIOS is set to RAID, jMicron controller is set to RAID, yet I can't see any of the drives in the BIOS setup, and jMicron BIOS tells me "no any drives found" The HDDs all spin up, I hear no clicking sounds or anything that would suggest HDD error. I did a search on this problem and replaced the SATA cables as suggested, but nothing's changed. What I have in mind is checking the CMOS battery and resetting the BIOS to use IDE mode, but I don't know if it will ruin the RAID system on the HDDs. It is not a critical server and there's only one database running on it (which I have backup of), but I don't want to setup the server from scratch if not necessary. What should I try to restore the RAID array and put the server back to working order?

    Read the article

  • How is it possible for SSD's drives to have such a good latency?

    - by tigrou
    First time i read some information about SSD's, i was surprised to learn they internally use NAND flash chips. This kind of memory is generally slow (low bandwidth) and have high latency while SSD's are just the opposite. But here is how it works : SSD drives increase their bandwidth by using several NAND flash chips in parallel. In other words, they do some data striping (aka RAID0) across several chips (done by the controller). What i don't understand is how SSD's drives have such a low latency, whereas they are using NAND chips? (or at least lot better than what a typical single NAND chip would do) EDIT: I think under-estimate NAND chip capabilities. USB drives, while powered by NAND's are mostly limited by USB protocol (which have a pretty high latency) and the USB controller. That explain their poor performance in some cases.

    Read the article

  • External drives show up in Nautilus/Computer even when they are unplugged.

    - by Testament
    I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC running Fedora 11 without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding to an Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

    Read the article

  • External drives show up in Nautilus/Computer even when they are unplugged.

    - by Testament
    I have two 1TB Seagate USB (sdc1 and sdd1) drives connected to an old PC without an X server running. Since sdc1 and sdd1 change depending on the order in which they are plugged in, I decided to mount them using their UUID instead. These are my fstab entries UUID=d1b28578-451b-4f03-af28-2e8a6d5b7efb /media/Seagate ext3 defaults,rw,auto,users UUID=36bf5df4-934e-42d4-9e25-16a13971509c /media/Projects ext3 defaults,rw,auto,users They work fine, but when I unmount them and unplug the USB drives, they still show up in Nautilus (I'm running nautilus with X11 forwarding onto another Ubuntu machine, btw). Now if I remove those entries from fstab, the drives disappear from Computer. If I add the entries back, they show up as an unmounted drive even when the drive is not plugged in. How do I do this so they don't show up when they're not plugged in?

    Read the article

  • How do I configure my 2 RAID drives so I can use it as /home?

    - by Kenn
    I've installed Ubuntu 11 64-bit to a 2 TB drive. it is on /dev/sda - port 1 of SATA Host Adaptor. This contains /dev/sda1 (1 MB boot), /dev/sda2 (2TB EXT4), /dev/sda3 8.6GB SWAP. I also have: /dev/sdb 2TB RAID COMPONENT /dev/sdc 2TB RAID COMPONENT which also show as /dev/dm-0 not partitioned /dev/dm-2 not partitioned which is mounted as /media/RAID_HOME I'm completely stumped as to how to use this version of Ubuntu to make these drives seem as just one raid mirrored drive and then how to transfer /home onto it.

    Read the article

  • Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?

    - by Russel
    Being first to try Ubuntu. But Where are my Hard Drives/Local Disks on the COMPUTER/System Folder in Ubuntu 12.04?! Before installing 12.04 i had tried the Ubuntu 10.10 Version Live and it was perfect in showing my Local Disks. But it couldn't recognize my GTX 470 Graphics driver so i thought of trying the recent version i.e 12.04. Fortunately it solved the Graphics driver thing but now i am stuck with finding My Local Disks on 12.04. I am sorry if this is a silly question, but i know nothing of Ubuntu at the moment. Regards,

    Read the article

  • If a raid controller changes, are the drives still usable without re-formatting?

    - by Jeremy
    I've been wanting to do a raid 1 setup in my home with a pair of sata drives. Someone told me that if the controller fails, you can't just get a new controller because you'll have to reformat the drives. Or is that true only in some implementations? I was originally just looking at an onboard raid controller, or an entry level nas drvice like the intel SS4200-E, but If the hardware (controller) ever fails, will I be out of luck accessing the data if I can't get the exact same hardware to replace it?

    Read the article

  • Can a 300W power supply support two additional hard drives?

    - by Josh
    I am thinking of purchasing the Dell I580-5108NBC, but I want to add 2 1TB SATA drives in a RAID5 config. The system only has a 300W power supply, and already has a 1TB drive and a DVD burner. Is the 300W power supply sufficient to support two additional drives, or should I upgrade it? Or, can I simply unplug the DVD burner?

    Read the article

  • How to list all files on all hard drives with output in MS-DOS batch?

    - by Leandro
    How can I list all files (including system and hidden) on all hard drives (not removable drives)? I think in something like a: dir -a -h *.* /s > file.txt but this is for the specific drive where I'm. How can I do something like that but with C:, D:, etc, but I don't know the DOS's name of the drivers, and i need a .bat to do this (an automatic listing). Implementer can't also know the names of drivers.

    Read the article

  • Network drives don't get mapped and desktop redirection stops working when domain user becomes a member of the Local Administrator group on their PC

    - by Kim Jong-Un
    We have a Small Business Server 2003 domain controller with Windows 7 workstations joined to the domain. I noticed recently that, if I make a user a local administrator on his computer, his redirected desktop and mapped network drives do not connect at login (error on login that network drives inaccessible and desktop is blank). However, it is still possible for this user to browse to his home directory where his redirected folders are located- so he still has access to that location. Does anyone have any theories as to what is going on here?

    Read the article

  • Laptop will boot to some usb flash drives but not others.

    - by evolvd
    Laptop: HP Compaq 6710b I can boot from usb just fine with the following usb flash drives: Cruzer micro 4GB HP 4GB The flash drive that will not boot: Flash Voyager 8GB To knock out variables I did the following: Using Hard Disk Low Level Format Tool I performed a low level format Full erase with Flash Memory Tookit In windows 7 I formated the drive to fat32 Used USB-Boot-Tester to write to the drive Also used uNetbooting with various distros to see if that would make a difference My guesses on what could be preventing the drive from booting: The laptop does not support booting to usb flash drives larger than 4GB The drive is defective in some way

    Read the article

  • Possible to (re)sync 2 drives into RAID 1 Array?

    - by MsLis
    Have an XP machine with 2 drives configured in a RAID 1 array. Trying to fix a boot problem, I took the drives out to run chkdsk on them, and I accidentally got them out-of-sync (event logs, etc). Is there any way to duplicate the contents of one drive onto the other to restore their RAID-ness, or have I really messed myself up?

    Read the article

< Previous Page | 13 14 15 16 17 18 19 20 21 22 23 24  | Next Page >