Search Results

Search found 5665 results on 227 pages for '2d games'.

Page 175/227 | < Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >

• Effect of using dedicated NVidia card instead of Intel HD4000

  - by Sman789

  Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

  Read the article

• Problem graphics with ATI Radeon x1270 (RS690M) on Ubuntu 12.04

  - by Giuseppe Della Corte

  I'm Italian and so I apologize for my English! I'm a beginner to Ubuntu and I tried it on my desktop PC and it's fantastic, fast and fun! I decided to try it on my netbook Packard Bell DOT M/A and this is the configuration: AMD Athlon L110 1.2GHz 2GB of RAM ATI Radeon x1270 (RS690M) 150GB Hard Disk I installed Ubuntu 12.04 with Wubi (dualboot Windows 7 + Ubuntu 12.04), because the netbook does not have a DVD player! During the installation everything is OK, after it was installed I see mistakes in the graphical display! I see objects that are seen in different colors and moving (buttons, mouse pointer, text bar ... etc ...) At one point came not to see anything, such as this screenshot: The drivers are open, that is already installed in Ubuntu. Windows 7 video card runs fine, can run well Aero (transparent window effects), I can watch movies in HD and play some games with the Catalyst drivers from AMD. Now I ask a favor, you can help me solve this problem? Is there a fix for this driver or drivers different on the Internet? Thanks for your attention, good bye!

  Read the article

• Belgrade Open Source Software Development Center

  - by Tori Wieldt

  A new Open Source Software Development Center is open at University of Belgrade Serbia. It centers around using Java & NetBeans as open source projects to learn from and contribute to. Assistant Professor Zoran Sevarac says that not only does the center allow him to teach software development using open source projects, but also "we are improving our University courses based on the experience we get from working on open source code."  Some of the projects underway are a NetBeans UML plugin; Neuroph (a Java neural network framework, with a NetBeans Platform-based UI); a NetBeans DOAP Plugin; WorkieTalkie (NetBeans chat plugin); and 2D and 3D visualization plugins for NetBeans. Here's video describing the NetBeans UML plugin: University of Belgrade also has an official university course about open source development, where students learn to use development tools, work in teams, participate in open source projects and learn from real world software development projects. Students, teachers, and researchers at the University of Belgrade, and any member of the open source community are welcome to come to learn software development from successful open source projects. For more information, you can contact Zoran Sevarac (@neuroph on Twitter). 

  Read the article

• Ubuntu 64bit Black Screen on Minecraft

  - by Signify

  I have tried posting on the forums, but I really need help (I'm a server admin and really don't want to have to switch to Windows just to run Minecraft). Anyhow, I originally was running openjdk6 as I was told that 7 was unstable and was getting periodical lag spikes while walking (at least once every 3 seconds the screen would freeze for a tenth of a second). After that, I attempted to install Sun's Java JDK7 (I couldn't get ahold of 6 without signing up for Oracle's newsletters). Upon attempting to run Minecraft, I got a black screen after logging in with this error message: 27 achievements 182 recipes Setting user: Thunder7102, -1618112820878091307 Exception in thread "Minecraft main thread" java.lang.UnsatisfiedLinkError: /home/noiro/.minecraft/bin/natives/liblwjgl.so: /home/noiro/.minecraft/bin/natives/liblwjgl.so: wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch) at java.lang.ClassLoader$NativeLibrary.load(Native Method) at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939) at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864) at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825) at java.lang.Runtime.load0(Runtime.java:792) at java.lang.System.load(System.java:1059) at org.lwjgl.Sys$1.run(Sys.java:69) at java.security.AccessController.doPrivileged(Native Method) at org.lwjgl.Sys.doLoadLibrary(Sys.java:65) at org.lwjgl.Sys.loadLibrary(Sys.java:81) at org.lwjgl.Sys.<clinit>(Sys.java:98) at org.lwjgl.opengl.Display.<clinit>(Display.java:132) at net.minecraft.client.Minecraft.a(SourceFile:184) at net.minecraft.client.Minecraft.run(SourceFile:657) at java.lang.Thread.run(Thread.java:722) Now, this got me fed up, so I tried to install a Windows 7 virtual machine through virtualbox, I gave it 256mb of graphics memory with 2D and 3D acceleration and 3GB of RAM. I installed Java JDK7 for Windows (which does work from experience on my other Windows 7 partition). Once again, a black screen after login. What the heck is going on guys? My System Specs: Ubuntu 12.04 64bit Fully Updated running Gnome3 Nvidia GTS 450 1.3GB OC'd AMD Athlon II 4x 2.8Ghz 6GB of RAM So, what do you think?

  Read the article

• How do I apply 2 rotations about different points to a single primitive using OpenGL

  - by Fenoec

  I'm working on a 2D top-down shooter game that has a rotation feature like Realm Of The Mad God such that if you press e the camera rotates around the character in a clockwise direction and q rotates the camera around the character in a counterclockwise direction. I have this working with my floors and walls by translating to the character, doing the screen rotation, and drawing everything with the character as the origin. The problem arises when I shoot projectiles which need to both rotate around the character and rotate around themselves (shooting uses the mouse cursor so I can shoot at any angle). For example, if the screen is not rotated and I'm shooting rectangular projectiles, I want them to face in the direction I'm shooting (rotation around themselves). However if I only do this rotation, when I then rotate the screen the projectiles will always shoot at the same position because my cursor position does not change. Therefore I need to also either rotate the projectiles around the character or rotate the mouse cursor position to get the correct position (which would then totally screw up all of the collision detection). Likewise if I only do the screen rotation on projectiles, the rectangles will always be facing the same way and they would only look correct if I were shooting straight up or straight down. So my question is, how can I perform 2 rotations on a primitive around 2 different points? The only way I can think of is to translate to the character and do the screen rotation, then somehow calculate the translation required to move back to the middle of the projectile (seeing as how my axes are now rotated) and do its rotation. Or am I thinking about this in the wrong way and there is a different solution to accomplishing this effect?

  Read the article

• Estimate angle to launch missile, maths question

  - by Jonathan

  I've been working on this for an hour or two now and my maths really isn't my strong suit which is definitely not a good thing for a game programmer but that shouldn't stop me enjoying a hobby surely? After a few failed attempts I was hoping someone else out there could help so here's the situation. I'm trying to implement a bit of faked intelligence when the A.I fires it's missiles at a target in a 2D game world. By predicting the likely position the target will be in given it's current velocity and the time it will take the missile to reach it's target. I created an image to demonstrate my thinking: http://i.imgur.com/SFmU3.png which also contains the logic I use for accelerating the missile after launch. The ship that fires the missile can fire within a total of 40 degree angle, 20 either side of itself, but this could likely become variable. My current attempt was to break the space between the two lines into segments which match the targets width. Then calculate the time it would take the missile to get to that location using the formula. So for each iteration of this we total up the values and that tells us the distance travelled, ad it would then just need compared to distance to the segment. startVelocity * ((startVelocity * acceleration)^(currentframe-1) So for example. If we start at a velocity of 1f/frame with an acceleration of 0.1f the formula, at frame 4, would be 1 * (1.1^3) = 1.331 But I quickly realized I was getting lost when trying to put this into practice. Does this seem like a correct starting point or am I going completely the wrong way about it? Any pointers would help me greatly. Maths really isn't my strong suit so I get easily lost in these matters and don't even really know a good phrase to search for with this. So I guess in summary my question is more about the correct way to approach this problem and any additional code samples on top of that would be great but I'm not averse to working out the complete code from helpful pointers.

  Read the article

• Where I'll Be At JavaOne 2012

  - by Geertjan

  Fun and games for me at JavaOne 2012. Below are the sessions/BOFs/tutorials I'll be attending. The items in red are the sessions and BOFs where I'll be speaking, either as the main/only speaker or as a supporting speaker in someone else's presentation, while the other items (except for the NetBeans booth duties and mini presentations, which are included below) are items I'm interested in and so will be sitting in the audience: Sunday: NetBeans Day Monday: 10:00 - 12:00 TUT4801: Make Your Clients Richer: JavaFX and the NetBeans Platform 12:20 - 12:30 Mini Presentation in OTN Lounge: What's New in NetBeans IDE? 13:00 - 14:00 CON7050: How My Life Would Have Been So Much Better If We Had Used the NetBeans Platform 14:30 - 14:40 Mini Presentation in OTN Lounge: NetBeans and Java EE 15:00 - 16:00 CON4038: Project EASEL: Developing and Managing HTML5 in a Java World 16:30 - 17:15 BOF6151: NetBeans.Next: The Roadmap Ahead 17:30 - 18:15 BOF3332: Lessons Learned in Writing a PDF-to-JavaFX Converter for NetBeans 18:30 - 19:15 BOF4920: Runtime Class Reloading for Dummies Tuesday: 9:30 - 11:30 NetBeans Booth 11:30 - 12:30 CON6139: Lessons Learned in Building Enterprise and Desktop Applications with the NetBeans IDE 13:00 - 14:00 CON4387: Bringing Mylyn to NetBeans and OSGi, Bridging Their Worlds 14:30 - 14:40 Mini Presentation in OTN Lounge: NetBeans Java Editor 15:30 - 17:30 NetBeans Booth 17:30 - 18:15 BOF3665: Custom Static Code Analysis 18:30 - 19:15 BOF5806: Doing JSF Development in the NetBeans IDE  Wednesday: 8:30 - 9:30 CON5132: NetBeans Plug-in Development: JRebel Experience Report 10:00 - 11:00 CON2987: Unlocking the Java EE 6 Platform 11:30 - 12:30 CON10140: Delivering Bug-Free, More Efficient Code for the Java Platform 13:00 - 14:00 CON3826: Patterns for Modularity: What Modules Don’t Want You to Know 14:30 - 14:40 Mini Presentation in OTN Lounge: NetBeans Platform 15:00 - 16:00 CON3160: Dynamic Class Reloading in the Wild with Javeleon Thursday: 12:30 - 13:30 CON4952: NetBeans Platform Panel Discussion 14:00 - 15:00 CON11879: Getting Started with the NetBeans Platform There are several sessions/BOFs I would have liked to be able to attend, but because of clashes with other sessions that I need to see slightly more urgently, I won't be able to attend those, unfortunately. Will be a busy but interesting time, as always! The entire list of NetBeans-oriented sessions can be found here: http://netbeans.org/community/articles/javaone/2012/index.html

  Read the article

• I have discovered a fundamental truth about TV shows and plots

  - by Steve Loethen

  For years, we have all known (okay, maybe I give people too much credit) that there is a very small finite number of plots.  I propose a project.  Let’s use the blogosphere to catalog those plotlines, and then find and document the episodes of shows that use them, including the show title. As evidence, how many shows have used the following plot line:? The standard “evil twin” plotline?  Once relegated to soaps, it has show up in crime shows, with the twist of DNA.  Step one, concentrate one this one.  Tell me about every show you recall that has used this plot.  I will collect and document the shows on my website (www.loethen.net) and we can build a database of the plots. Step two, what other common themes should I offer up?  How about the bigamist plot line?  The “bad guy was dead” plot line (revenge from the dead"?  The “vast government conspiracy” plotline? Let the games begin….

  Read the article

• How to deal with OpenGL and Fullscreen on OS X

  - by Armin Ronacher

  I do most of my development on OS X and for my current game project this is my target environment. However when I play games I play on Windows. As a windows gamer I am used to Alt+Tab switching from within the game to the last application that was open. On OS X I currently can't find either a game that supports that nor can I find a way to make it possible. My current project is based on SDL 1.3 and I can see that cmd+tab is a sequence that is sent directly to my application and not intercepted by the operating system. Now my first attempt was to hide the rendering window on cmd+tab which certainly works, but has the disadvantage that a hidden OpenGL window in SDL cannot be restored when the user tabs back to the application. First of all, there is no event fired for that or I can't find it, secondly the core problem is that when that application window is hidden, my game is still the active application, just that the window disappeared. That is incredible annoying. Any ideas how to approximate the windows / linux behavior for alt+tab?

  Read the article

• Loadbalancing Questions

  - by Van Holtz

  I have been learning networking for about 4 months. Wrote a single standalone Multiplayer server and succeeded with authoritative approach. Now I want to extend it by splitting the single server into clusters to allow even more players to log in to avoid latency issues. Now I have protyped the Loadbalancing server and its running pretty good so far. This is my architecture, I have a master server which acts as a proxy, every sub servers(chat, login, game) connect to the master server as well as all the clients. when a client connects, Client Request: Send Request - MS(Master) - Decides which SS(SubServer) to forward to - Forwards Request to SS - SS - Analyze Message - Send Response to MS - Decides which Client to forward to - Forwards Response to Client Well, it looks like its going through lots of stages. it takes double the time to process the message than a single server approach. i feel like my model isnt the best or i may be wrong. is there any better model or the one they use in professional games? I still want a Master-SubServer approach. I just want to clarify that I'm going in the right direction before writing all my codes. Thanks for any answer :)

  Read the article

• Pathfinding with MicroPather : costs calculations with sectors and portals

  - by Adan

  Hello, I'm considering using micropather to help me with pathfinding. I'm not using a discrete map : I'm working in 2d with sectors and portales. However, I'm just wondering what is the best way to compute costs with this library in this context. Just to be more clear about geometrical shapes I'm using : sectors are basically convex polygons, and portals are segments that lies on sector's edge. Micropather exposes a pure virtual Graph class that you must inherate and overrides 3 functions. I understand how pathfinding works, so there's no problem in overriding those functions. Right now, my implementation give me results, i.e I'm able to find a path in my map, but I'm not sure I'm using an optimal solution. For the AdjacentCost method : I just take the distance between sector's centers as the cost. I think a better solution should be to use the portal between the two sectors, compute its center, and then the cost should be : distance( sector A center, portal center ) + distance ( sector B center, portal center ). I'm pretty sure the approximation I'm using with just sector's center is enough for most cases, but maybe with thin and long sectors that are perpendicular, this approximation could mislead the A* algorithm. For the LeastCostEstimate method : I just take the midpoint of the two sectors. So, as you understand, I'm always working with sectors' centers, and it's working fine. And I'm pretty sure there's a better way to work. Any suggestions or feedbacks? Thanks in advance!

  Read the article

• How to make image bigger than the screen to be slideable in the screen in monogame for windows phone 8?

  - by Moses Aprico

  (Idk if my title is correct, because when I google it, there is no related result I guess) I am not sure how to explain it correctly, but I am making a plain 2D, tile based, tactic game in windows phone 8 using monogame. I want to make my map is "slideable". With "slidable" I mean I can draw larger images (in total) than my screen and then slide it so I can view a certain area of the drawn images Example : I have a screen which dimension is 1280x720. I have a 1500x1500px image, which consists of 15 tiles, which is 100x100px each, which each tiles is redrawn each times the "Draw" is called. If the image is larger than the screen, the displayed area will be trimmed and of course, making a 220x780px area that is unseenable. The only way to see all of it is through "sliding" the screen around, so I can see all the area. My question is : How to make that happen? Because in default, the screen is unslideable and the image remains trimmed. Sorry if my question and explanation is not clear enough. Clarify it as much as you like. Thank you.

  Read the article

• How do you run XBMC on nvidia dual screen and stop it from taking over the keyboard and mouse?

  - by Paul Swartout

  I have set up dual screen under Ubuntu 12.04. I have a GeForce 8500 GT and have used the nVidia control panel to set up dual screen in "Separate screen mode". Here's the resulting xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@zirconium) Fri Mar 30 13:38:49 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Maxdata/Belinea B1925S1W" HorizSync 31.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: builtin, VertRefresh source: builtin Identifier "Monitor1" VendorName "Unknown" ModelName "CRT-1" HorizSync 28.0 - 55.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 8500 GT" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "CRT-1: 1280x768 +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT-1: 1360x768_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection All well and good and I have a nice blank XWindow displayed on my TV (the 2nd monitor). I then fire up XBMC from a terminal on the PC monitor using DISPLAY=:0.1 xbmc XBMC fires up quite nicely on the TV however I can no longer use the main PC monitor / mouse / keyboard as XBMC on the TV screen seems to have focus. I was hoping to have XBMC running on the TV and let the kids use the MCE remote whilst I get on with my work on the PC monitor. Does anyone have any idea how to overcome this? I'm presuming there's some xorg.conf fun and games needed but I've no idea where to start to be honest.

  Read the article

• Draw contour around object in Opengl

  - by Maciekp

  I need to draw contour around 2d objects in 3d space. I tried drawing lines around object(+points to fill the gap), but due to line width, some part of it(~50%) was covering object. I tried to use stencil buffer, to eliminate this problem, but I got sth like this(contour is green): http://goo.gl/OI5uc (sorry I can't post images, due to my reputation) You can see(where arrow points), that some parts of line are behind object, and some are above. This changes when I move camera, but always there is some part, that is covering it. Here is code, that I use for drawing object: glColorMask(1,1,1,1); std::list<CObjectOnScene*>::iterator objIter=ptr->objects.begin(),objEnd=ptr->objects.end(); int countStencilBit=1; while(objIter!=objEnd) { glColorMask(1,1,1,1); glStencilFunc(GL_ALWAYS,countStencilBit,countStencilBit); glStencilOp(GL_REPLACE,GL_KEEP,GL_REPLACE ); (*objIter)->DrawYourVertices(); glStencilFunc(GL_NOTEQUAL,countStencilBit,countStencilBit); glStencilOp(GL_KEEP,GL_KEEP,GL_REPLACE); (*objIter)->DrawYourBorder(); ++objIter; ++countStencilBit; } I've tried different settings of stencil buffer, but always I was getting sth like that. Here is question: 1.Am I setting stencil buffer wrong? 2. Are there any other simple ways to create contour on such objects? Thanks in advance.

  Read the article

• Proper method to update and draw from game loop?

  - by Lost_Soul

  Recently I've took up the challenge for myself to create a basic 2d side scrolling monster truck game for my little brother. Which seems easy enough in theory. After working with XNA it seems strange jumping into Java (which is what I plan to program it in). Inside my game class I created a private class called GameLoop that extends from Runnable, then in the overridden run() method I made a while loop that handles time and such and I implemented a targetFPS for drawing as well. The loop looks like this: @Override public void run() { long fpsTime = 0; gameStart = System.currentTimeMillis(); lastTime = System.currentTimeMillis(); while(game.isGameRunning()) { currentTime = System.currentTimeMillis(); long ellapsedTime = currentTime - lastTime; if(mouseState.leftIsDown) { que.add(new Dot(mouseState.getPosition())); } entities.addAll(que); game.updateGame(ellapsedTime); fpsTime += ellapsedTime; if(fpsTime >= (1000 / targetedFPS)) { game.drawGame(ellapsedTime); } lastTime = currentTime; } The problem I've ran into is adding of entities after a click. I made a class that has another private class that extends MouseListener and MouseMotionListener then on changes I have it set a few booleans to tell me if the mouse is pressed or not which seems to work great but when I add the entity it throws a CME (Concurrent Modification Exception) sometimes. I have all the entities stored in a LinkedList so later I tried adding a que linkedlist where I later add the que to the normal list in the update loop. I think this would work fine if it was just the update method in the gameloop but with the repaint() method (called inside game.drawGame() method) it throws the CME. The only other thing is that I'm currently drawing directly from the overridden paintComponent() method in a custom class that extends JPanel. Maybe there is a better way to go about this? As well as fix my CME? Thanks in advance!!!

  Read the article

• How do I separate model positions from view positions in MVC?

  - by tieTYT

  Using MVC in games (as opposed to web apps) always confuses me when it comes to the view. How am I supposed to keep the model agnostic of how the view is presenting things? I always end up giving the Model a position that holds x and y but invariably, these values end up being in units of pixels and that feels wrong. I can see the advantage* of avoiding that but how am I supposed to? This idea was suggested: Don't think of it in units of pixels, think of them in arbitrary distance units that just happen map to pixels at a 1:1 ratio. Oh, the resolution is half of what it was? We are now taking the x/y coordinates at 50% value for screen display, and your spells casting range is still 300 units long, which now is 150 pixels. But those numbers conveniently work out. What do I do if the numbers divide in such a way that I get decimal places? Floating points are unsafe. I think allowing decimal places would eventually cause really weird bugs in my game. *It'd let me write the model once and write different views depending on the device.

  Read the article

• What's a way to implement a flexible buff/debuff system?

  - by gkimsey

  Overview: Lots of games which RPG-like statistics allow for character "buffs", ranging from simple "Deal 25% extra damage" to more complicated things like "Deal 15 damage back to attackers when hit." The specifics of each type of buff aren't really relevant. I'm looking for a (presumably object-oriented) way to handle arbitrary buffs. Details: In my particular case, I have multiple characters in a turn-based battle environment, so I envisioned buffs being tied to events like "OnTurnStart", "OnReceiveDamage", etc. Perhaps each buff is a subclass of a main Buff abstract class, where only the relevant events are overloaded. Then each character could have a vector of buffs currently applied. Does this solution make sense? I can certainly see dozens of event types being necessary, it feels like making a new subclass for each buff is overkill, and it doesn't seem to allow for any buff "interactions". That is, if I wanted to implement a cap on damage boosts so that even if you had 10 different buffs which all give 25% extra damage, you only do 100% extra instead of 250% extra. And there's more complicated situations that ideally I could control. I'm sure everyone can come up with examples of how more sophisticated buffs can potentially interact with each other in a way that as a game developer I may not want. As a relatively inexperienced C++ programmer (I generally have used C in embedded systems), I feel like my solution is simplistic and probably doesn't take full advantage of the object-oriented language. Thoughts? Has anyone here designed a fairly robust buff system before?

  Read the article

• What are all the components of a "Facebook App"?

  - by pnongrata

  I am a developer who has never personally partaken in social media (in any form) for reasons completely outside the scope of this question. I am "off the grid" (no Facebook, Twitter, etc accounts). I'm currently building a web app and would like the app to have a presence on Facebook, and possibly even "port" my app over as a Facebook app. My understanding of Facebook Apps is that they're just normal web apps that get <iframe>d into a Facebook page. The app is actually hosted on your server (not FB's servers). But this got me thinking: Don't Facebook Apps have "profile pages"? Is there anything developers can do to customize the behavior of their own profile pages? Do apps have the ability to do things like MySpace themes used to do (i.e., customize and interact with User profile pages, Groups, etc.)? Do Facebook Apps gain any sort of extra capabilities (inside of Facebook) that a normal web app would not have? It seems to me like if all a Facebook App is, is an iframed-web app, that it would still need to communicate with Facebook via its many APIs, just like a normal app would have to, right? If it's not possible to write an app that can customize the UI or behavior of user profiles and other pages, then how do games like "Farmville" interact with User profiles so that you see updates to profiles like "John Smith reached level 2 of Farmville"? Basically, I'm asking any battle-worn Facebook app developers if my understanding of Facebook Apps is correct, or if I'm missing anything big here. It's my understanding that for security reasons (obviously) Facebook doesn't allow apps to customize anything outside of the iframe it lives in. So if I want my app to appear like it's "interacting" with its Facebook users, it looks like I just need to publish stuff to the users' news feeds to try and encourage people to use my app (please correct me if I'm wrong here!). Thanks in advance for any corrections, clarifications, advice or suggestions!

  Read the article

• How can I draw crisp per-pixel images with OpenGL ES on Android?

  - by Qasim

  I have made many Android applications and games in Java before, however I am very new to OpenGL ES. Using guides online, I have made simple things in OpenGL ES, including a simple triangle and a cube. I would like to make a 2D game with OpenGL ES, but what I've been doing isn't working quite so well, as the images I draw aren't to scale, and no matter what guide I use, the image is always choppy and not the right size (I'm debugging on my Nexus S). How can I draw crisp, HD images to the screen with GL ES? Here is an example of what happens when I try to do it: And the actual image: Here is how my texture is created: //get id int id = -1; gl.glGenTextures(1, texture, 0); id = texture[0]; //get bitmap Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.ball); //parameters gl.glBindTexture(GL10.GL_TEXTURE_2D, id); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_CLAMP_TO_EDGE); gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_CLAMP_TO_EDGE); gl.glTexEnvf(GL10.GL_TEXTURE_ENV, GL10.GL_TEXTURE_ENV_MODE, GL10.GL_REPLACE); GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0); //crop image mCropWorkspace[0] = 0; mCropWorkspace[1] = height; mCropWorkspace[2] = width; mCropWorkspace[3] = -height; ((GL11) gl).glTexParameteriv(GL10.GL_TEXTURE_2D, GL11Ext.GL_TEXTURE_CROP_RECT_OES, mCropWorkspace, 0);

  Read the article

• Index Check and Correct Character Display in a Console Hangman Game for Java

  - by Jen

  I have this problem wherein, I can not display the correct characters given by the character. Here's what I meant: String words, in; String replaced_words; Scanner s = new Scanner (System.in); System.out.println("Enter a line of words basing on an event, verse, place or a name of a person."); words = s.nextLine(); System.out.println("The words you just placed are now accepted."); //using char array method, we tried to place the words into a characters array. char [] c = words.toCharArray(); // we need to replace the replaced_words = words.replace(' ', '_').replaceAll("[^\\-]", "-"); for (int i = 0; i < replaced_words.length(); i++) { System.out.print(replaced_words.charAt(i) + " "); } System.out.println("Now, please input a character, guessing the words you just placed."); in = s.nextLine(); in that code, want that the user, when types a word (or should it be character?), any of the correct character the user inputs will be displayed, and changes the hyphen to it...(more like the hangman series of games). How can I achieve this?

  Read the article

• Server-side Architecture for Online Game

  - by Draiken

  basically I have a game client that has communicate with a server for almost every action it takes, the game is in Java (using LWJGL) and right now I will start making the server. The base of the game is normally one client communicating with the server alone, but I will require later on for several clients to work together for some functionalities. I've already read how authentication server should be sepparated and I intend on doing it. The problem is I am completely inexperienced in this kind of server-side programming, all I've ever programmed were JSF web applications. I imagine I'll do socket connections for pretty much every game communication since HTML is very slow, but I still don't really know where to start on my server. I would appreciate reading material or guidelines on where to start, what architecture should the game server have and maybe some suggestions on frameworks that could help me getting the client-server communication. I've looked into JNAG but I have no experience with this kind of thing, so I can't really tell if it is a solid and good messaging layer. Any help is appreciated... Thanks ! EDIT: Just a little more information about the game. It is intended to be a very complex game with several functionalities, making some functionalities a "program" inside the program. It is not an usual game, like FPS or RPG but I intend on having a lot of users using these many different "programs" inside the game. If I wasn't clear enough, I'd really appreciate people that have already developed games with java client/server architecture, how they communicated, any frameworks, apis, messaging systems, etc. It is not a question of lack of knowledge of language, more a question for advice, so I don't end up creating something that works, but in the later stages will have to be rewriten for any kind of limiting reason. PS: sorry if my english is not perfect...

  Read the article

• Entity system in Lua, communication with C++ and level editor. Need advice.

  - by Notbad

  Hi!, I know this is a really difficult subject. I have been reading a lot this days about Entity systems, etc... And now I'm ready to ask some questions (if you don't mind answering them) because I'm really messed. First of all, I have a 2D basic editor written in Qt, and I'm in the process of adding entitiy edition. I want the editor to be able to receive RTTI information from entities to change properties, create some logic being able to link published events to published actions (Ex:A level activate event throws a door open action), etc... Because all of this I guess my entity system should be written in scripting, in my case Lua. In the other hand I want to use a component based design for my entities, and here starts my questions: 1) Should I define my componentes en C++? If I do this en C++ won't I loose all the RTTI information I want for my editor?. In the other hand, I use box2d for physics, if I define all my components in script won't it be a lot of work to expose third party libs to lua? 2) Where should I place the messa system for my game engine? Lua? C++?. I'm tempted to just have C++ object to behave as servers, offering services to lua business logic. Things like physics system, rendering system, input system, World class, etc... And for all the other things, lua. Creation/Composition of entities based on components, game logic, etc... Could anyone give any insight on how to accomplish this? And what aproach is better?. Thanks in advance, HexDump.

  Read the article

• Could these people get arrested? [closed]

  - by Vinicius Horta

  I have seen many of what is called 'private servers' mmorpg (multiplayer online games), which uses stolen sources,modified executable, clients and server. People launch up their own server using VPS or dedicated server and distribute online service among players disclaiming it has educational purposes only, saying they are studying the game engine and selling items for players disclaming it as 'donations', so it seems like they are getting donations to keep studying. We all know it's a comercial method. All of it is copyrighted material from enterprise ABCD. (ABCD = Fictional name, I'm not mentioning names). At their website they include the following: "Private Server XXXX" does not allow/support any conection to any company/organization associated with the game "XXXX". If you are anyway affiliated with enterprise "XXXXXXX", or any other company/organization associated with the game "XXXX" you may not view/open/read/execute/play/download any part of "Private Server XXXX" nor view "Private Server XXXX" website, if any company/organization requests you to investigate our website/server, you may not view "Private SERVER XXXX" or execute any action mentioned above. Any person caught disobeting this disclaimer will be punish to the fulleste extent of law. Can this guys get arrested? Do they disclaimer works? If I'm owner of enterprise X and I know people stole my source and are using them but they have such disclaimer I'm not allowed to investigate them?

  Read the article

• How do I keep a 3D model on the screen in OpenGL?

  - by NoobScratcher

  I'm trying to keep a 3D model on the screen by placing my glDrawElement functions inside the draw function with the declarations at the top of .cpp. When I render the model, the model attaches it self to the current vertex buffer object. This is because my whole graphical user interface is in 2D quads except the window frame. Is there a way to avoid this from happening? or any common causes of this? Creating the file object: int index = IndexAssigner(1, 1); //make a fileobject and store list and the index of that list in a c string ifstream file (list[index].c_str() ); //Make another string //string line; points.push_back(Point()); Point p; int face[4]; Model rendering code: int numfloats = 4; float* point=reinterpret_cast<float*>(&points[0]); int num_bytes=numfloats*sizeof(float); cout << "Size Of Point" << sizeof(Point) << endl; GLuint vertexbuffer; glGenVertexArrays(1, &vao[3]); glGenBuffers(1, &vertexbuffer); glBindBuffer(GL_ARRAY_BUFFER, vertexbuffer); glBufferData(GL_ARRAY_BUFFER, points.size()*sizeof(points), points.data(), GL_STATIC_DRAW); glVertexAttribPointer(0, 3, GL_FLOAT, GL_FALSE, num_bytes, &points[0]); glEnableClientState(GL_VERTEX_ARRAY); glVertexPointer(3, GL_FLOAT, points.size(), &points[0]); glEnableClientState(GL_INDEX_ARRAY); glIndexPointer(GL_FLOAT, faces.size(), faces.data()); glEnableVertexAttribArray(0); glDrawElements(GL_QUADS, points.size(), GL_UNSIGNED_INT, points.data()); glDrawElements(GL_QUADS, faces.size(), GL_UNSIGNED_INT, faces.data());

  Read the article

• XNA 4.0 - Purple/Pink Tint Over All Sprites After Viewing in FullScreen

  - by D. Dubya

  I'm a noob to the game dev world and recently finished the 2D XNA tutorial from http://www.pluralsight.com. Everything was perfect until I decided to try the game in Fullscreen mode. The following code was added to the Game1 constructor. graphics.PreferredBackBufferWidth = 800; graphics.PreferredBackBufferHeight = 480; graphics.IsFullScreen = true; As soon as it launched in Fullscreen, I noticed that the entire game was tinted. None of the colours were appearing as they should. That code was removed, the game then launched in the 800x480 window, however the tint remained. I commented out all my Draw code so that all that was left was GraphicsDevice.Clear(Color.CornflowerBlue); //spriteBatch.Begin(); //gameState.Draw(spriteBatch, false); //spriteBatch.End(); //spriteBatch.Begin(SpriteSortMode.Deferred, BlendState.Additive); //gameState.Draw(spriteBatch, true); //spriteBatch.End(); base.Draw(gameTime); The result was an empty window that was tinted Purple, not Blue. I changed the GraphicsDevice.Clear colour to Color.White and the window was tinted Pink. Color.Transparent gave a Black window. Even tried rebooting my PC but the 'tint' still remains. I'm at a loss here.

  Read the article

< Previous Page | 171 172 173 174 175 176 177 178 179 180 181 182  | Next Page >