Search Results

Search found 7776 results on 312 pages for 'configure in'.

Page 179/312 | < Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• Bind include all zones in a folder

  - by alexcepoi

  I have a webapp that acts as a DNS manager, writing all zones to "/var/named". I would like to be able to configure named to load all zones in that folder, without explicitely having to tell it which zone goes to which file. Is that remotely possible? The reason for this is that i will be having a lot of zones added/deleted and a lot of records for each of them. I was thinking for using a database for that, but the idea of doing 500 record inserts scares me (it needs to be snappy). It's easier to write to a file. Any suggestions?

  Read the article

• Setting up a linux switch

  - by Shahmir Javaid

  I have a C++ Program to sniff each and every packet that crosses my linux box. However i need to now get my linux box to listen to every traffic in my network. I could buy a managed switch and set up port spanning, but i aint paying 200+ £'s for a switch and plus gives me a chance to learn. My Network +---------Computer A | Internet-----Router------Switch-------------+---------Linux Box | +---------Computer B Proposed Network +---------Computer A | Internet-----Router------Linux Box--------Switch eth0^ ^eth1 | +---------Computer B How would i setup this in linux. Do i just configure both the ethernet on different IP Address on the same network. Or am i completelly on the wrong track My System Fedora 13. Thanks

  Read the article

• Unable to set .NET 4 on Application Pool from remote, works locally on server

  - by Robin Wassén-Andersson

  I have setup Remote Administration for IIS successfully and connected to it. For some reason .NET Framework 4 doesn't show up as an option when configuring the Application Pools from remote even though .NET 4 is installed on both server and client (not that client should matter). If I login to the server with RDP and configure the Application Pools it work as intended, the option shows up. Even more odd is if I edit an Application Pool that already runs .Net 4 it shows up as an alternative (kind of strangly formatted text though, just says v4.0 instead of .NET Framework v4.0.30319 ) How should I proceed to solve this?

  Read the article

• Common filesystem for servers behind a rackspace load balancer

  - by thanos panousis

  Our PHP application consists of a single web server that will receive files from clients and perform a CPU-intensive analysis on them. Right now, analysis of a single user upload can take 3sec to conclude and take 100% CPU. This makes our system capacity amount to 1/3 requests per second. My team's requirement is to increase capacity without a lot of code reengineering. A possible solution would be to set up a load balancer in front of multiple servers running the same app, connecting to a common DB. The problem is that the analysis outputs files on disk. A load balancer would increase capacity, but then files won't be available between servers so consequent client requests may fail. We are hosted on Rackspace, is there a way to configure some sort of "common" storage for all servers, without having to rewrite our file persistance code? Current code relies on simple fopens etc. What are our options?

  Read the article

• Same folder history for "save folder" as "change folder"?

  - by Hendrik Vogt

  I use mutt as my e-mail client and have only one major annoyance. If I want to save an e-mail to a folder that I've used before as a "save folder", then I can use the up-arrow to navigate to the folder name. Now if I want to change into that folder, the up-arrow only gives me names of folders I've changed into before. It appears that mutt has two different folder histories for these two purposes. How can I configure mutt so that only one history is used for both purposes? (By the way, I'm pretty sure that older versions of mutt behaved exactly as I wanted, but unfortunately I can't tell the version number.)

  Read the article

• Notification area balloon tip pop sound in Windows 7

  - by Worm Regards

  When I was using Windows XP, there was a distinct sound when an application showed a balloon tip in the notification area (aka system tray). Unfortunately, I didn't look any deeper into it. Now Windows 7 has this behavior disabled by default and I do not know how to configure it. Discovered the name of sound file used to accompany tray balloon tips in Windows XP Windows XP Balloon.wav More clues: interesting registry key is HKEY_USERS\XP Registry Hive\AppEvents\Schemes\Apps\.Default\SystemNotification\.Default Default value is %SystemRoot%\media\Windows XP Balloon.wav So, the System Notification event label appears to be correct, but tray balloons are silenced elsewhere.

  Read the article

• Web log files analyzer

  - by Peter Štibraný

  I already use Google Analytics on my page, but I'd like to get additional info from log files. I've looked at various packages during last days, but nothing impressed me so far. Some requirements: must work on log file level (I use apache combined logs, but can configure apache to produce other types of logs) can generate static reports (windows/linux) or use GUI (windows only) should be easy to add custom user agents, and rerun analysis if it can recognize installation of eclipse plugins from log, that would be big plus understands google serp position referer should not require two days to setup (awstats, I am looking at you) should be still under active developement (i.e. analog isn't good answer) preferrably free, or at not very expensive :-) Any good analyzers programs out there?

  Read the article

• MMS gets hostname from uname and can't connect to it

  - by Adam Monsen

  I'm trying to get 10gen's MongoDB Monitoring Service monitoring my 3-node replica set. The replica set running in an AWS VPC. Each node runs on a different [virtual] machine. Assume their IPs are 192.168.1.1 (primary or secondary), 192.168.1.2 (primary or secondary), 192.168.1.3 (arbiter). From a quick look at the source, MMS appears to get the hostname of the machine it is running on like so: platform.uname()[1] For my VPC EC2 instance, this returns something like ip-192-168-1-1 MMS then tries to connect to this hostname, which does not resolve. I'd rather just use IP addresses (since they're always static), but it seems like the hardcoded use of platform.uname()[1] in mmsAgent.py precludes that. So, what's an elegant way out of this? Hack /etc/hosts? I'm not setting up a DNS server just for this. Maybe I'm just misunderstanding how to configure MMS.

  Read the article

• How do I schedule a task to run every hour indefinitely on Server 2003

  - by JMK

  I am moving a scheduled task from a Windows 7 machine to a Windows Server 2003 machine. On Windows 7 I can configure my task to run every hour indefinitely by setting up a custom trigger like so: On Windows Server 2003, I assume I need to use the advanced schedule options, and I have got this far: Whether I choose duration or time, my task seems to have an expiry date, how do I get this to run indefinitely? The only thing I can think of at the minute is to setup 24 schedules for my task, one for each hour but there has to be a more elegant way. Thanks

  Read the article

• How do I add a counter for process data in perfmon.exe for a process that isn't currently running?

  - by Jason Jones

  I would like to perform an ad hoc capture of data using perfmon.exe for a process that runs during the night. I know the name of the executable--lets call it Foo.exe. If the process were currently running, I would go to the Add Counters dialog in perfmon, switch to the Process object, and select the Foo instance from the list. However, it's not currently running. Is it possible to set up perfmon so that it will capture process data for this process when it starts, and if so, how would I configure it to do so?

  Read the article

• How to install a proxy LDAP

  - by Jean-Claude

  I have to install an LDAP proxy on a compute cluster frontend. The idea is to avoid the compute nodes to make too many requests on the campus LDAP server. How can I install this to make it work with the school's LDAP? The frontend OS is a RHEL 6.2. I found that I have to install the LDAP server and configure it as a proxy. But all I can find is examples of /etc/openldap/slapd.conf file configuration but after testing different configuration, no results. Furthermore, according to RHEL 6 - Deployment Guide, this config file is obsolete: OpenLDAP no longer reads its configuration from the /etc/openldap/slapd.conf file. Instead, it uses a configuration database located in the /etc/openldap/slapd.d/ directory. Any help is welcomed. Thank you

  Read the article

• Broadcasted networks appear cached with netsh? [on hold]

  - by Joe

  We have a company mandate to hide certain windows functions. I'm working on a company application which will allow my users to configure WiFi networks. The app is scanning broadcasted networks using: "netsh wlan show networks" it will return networks that have been turned off. For example: I will run the command and then unplug my wireless router with the SSID "Netgear". For several minutes after turning off the network, the show networks command will continue to return "Netgear". Does anyone know where this gets cached, how to clear it out, or how to force a fresh scan of "netsh wlan show networks"? Thanks all, J

  Read the article

• Which firewall ports do I need to open in order for a domain trust to work?

  - by Massimo

  I have two Active Directory domains in two different forests; each domain has two DCs (all of them Windows Server 2008 R2). The domains are also in different networks, with a firewall connecting them. I need to create a two-way forest trust between the two domains and forest. How do I configure the firewall to allow this? I found this article, but it doesn't explain very clearly which traffic is required between DCs, and which traffic (if any) in needed instead between domain computers in one domain and DCs for the other one. I'm allowed to permit all traffic between the DCs, but allowing computers in one network to access DCs in the other one would be a little more difficult.

  Read the article

• How to install Gitlab in a VM on a production server?

  - by Michaël Perrin

  I have a production server running Ubuntu 12.04 and I would like to install on it a VM with Gitlab (using Vagrant and Virtualbox). Let's say that the address to access Gitlab is gitlab.mydomain.com . The DNS zone has been configured to point to the IP address of the server. I want users to be able to access to Gitlab (either for pushing to a repository, or for accessing to the web interface) from the outside. The VM has been configured to have an IP address. It means that when browsing http://gitlab.mydomain.com for instance, the request has to be forwarded to the VM on the server, ie. to the VM IP address. What are the ways to configure this? Can Apache be used as a proxy? In this case, I guess it only works for HTTP requests, but not for pushing to a Git repository on the VM.

  Read the article

• How can I make the NetworkManager work?

  - by Yang Jy

  I am running a version of RHCE6 on my laptop, and lately I've been trying various stuff about network configuration through command line. Last night, I tried removing the NetworkManager using "yum remove NetworkManager" from the system, so that I could have more control of the network through the command line. But the result is, I didn't manage to configure the wireless connection through wpa_supplicant, and I need wireless connection during my travel to another place. So I need the wireless function back as soon as possible. I typed " yum install NetworkManager", some version installed, but I don't get to have an icon on the taskbar, and of course, the network doesn't work. The package I previously removed(about 24MB) was much larger that the one I just installed(about 2MB), so I think some dependencies must be missing. How could I install all these dependencies? Please help!

  Read the article

• need for tcp fine-tuning on heavily used proxy server

  - by Vijay Gharge

  Hi all, I am using squid like Internet proxy server on RHEL 4 update 6 & 8 with quite heavy load i.e. 8k established connections during peak hour. Without depending much on application provider's expertise I want to achieve maximum o/p from linux. W.r.t. that I have certain questions as following: How to find out if there is scope for further tcp fine-tuning (without exhausting available resources) as the benchmark values given by vendor looks poor! Is there any parameter value that is available from OS / network stack that will show me the results. If at all there is scope, how shall I identify & configure OS tcp stack parameters i.e. using sysctl or any specific parameter Post tuning how shall I clearly measure performance enhancement / degradation ?

  Read the article

• Can't install Ubuntu 12 into VirtualBox (USB not recognized, ISO would not boot)

  - by wvxvw

  I'm trying out VirtualBox 4.18 and wanted to install Ubuntu 12 as a test. After installing VirtualBox (on Debian squeeze/sid), creating a virtual machine for Ubuntu and pointing it in Settings Storage IDE Controllers to the ISO with the proper version of Ubuntu, checked the "Live CD" option. Tried to define the IDE as master / slave, primary / secondary - all to no effect, and trying to boot this system, I'm getting to the screen which says: FATAL: could not read from the boot medium! System halted I've copied the same ISO to the USB stick, and I can boot from the USB (outside VirtualBox). I've looked at couple of tutorials / walk-through, there's nothing I can see that I would've done wrong. So, how would I configure it to boot from the desired ISO? Below is the snapshot with the current settings (sorry, I don't know how to get them as text).

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Cisco RV016 dual WAN and VPN setup

  - by sklr

  I have a VPN of several RV016 routers and I want to set some of them with 2 ISPs. I plug the two ISP cables in WAN 1 and 2 ports and configure the router to "Intelligent Balancer(Auto Mode)". It works ok like that, but the VPNs that I set use the public IP of the provider. For example if I have 5 VPNs set for ISP1 (WAN1) and the balancer sends the request trough WAN2 it can't use any of the configured VPNs because the public IP is different. How do I deal with this problem?

  Read the article

• Log incoming requests on Ubuntu (ports 80, 443)

  - by Maxim Eliseev

  We have Tomcat running on Ubuntu server. It runs a web service, open to the internet. Sometimes it has a sudden spike of traffic and goes down. There is nothing unusual in Tomcat access logs. I guess it is because some of the requests are so 'heavy' that they never finish and hence are not recorded to Tomcat access logs. Is there a way to configure Ubuntu to log incoming requests in the following format (below)? Date, Time, URL (with query string params), IP address (of client) There should be one line per request. Each request should be logged before it is executed. Only incoming requests to ports 80 and 443 should be logged.

  Read the article

• libkeybinder error Arch linux

  - by Nihar Sarangi

  I am trying to install a package that depends on python-keybinder and hence on libkeybinder. When I run makepkg for libkeybinder, it starts and after sometime I get the following error: checking for XkbQueryExtension... no configure: error: Could not find XKB ==> ERROR: A failure occurred in build(). Aborting... ==> ERROR: Makepkg was unable to build libkeybinder. I tried checking the pkgbuild but wasn't able to find anything. :( Is there a workaround?

  Read the article

• I keep getting OpenSSL Header Version not found error when compiling OpenSSH Debian Squeeze

  - by Romoku

  I built Openssl1.0.0d ./config shared no-threads zlib It installed fine to the default /usr/local/ssl I went and downloaded OpenSSH 5.8p2 and ran ./configure but now it keeps giving me a Openssl version header not found error even when I set --with-ssl-dir= I've tried it with arguments /usr/local/ssl/include /usr/local/ssl/include/openssl /usr/include /usr/local/ssl/lib I looked in config.log and found error: openssl/opensslv.h: no such file or directory which makes little sense since I pointed openssh to where it is store. /etc/ld.so.conf include /usr/local/ssl/lib I'm at a loss at this point. Answer (maybe): Because I am an idiot. include /usr/local/ssl/lib is incorrect. /usr/local/ssl/lib is correct. It needs to be before the first include.

  Read the article

• No rule to make target libmysql.c', needed bylibmysql.lo'. Stop

  - by user1711008

  I install mysql5.1.53, run #./configure is well, but run #make have this error. My system is centos5.8, gcc version 4.1.2 20080704 (Red Hat 4.1.2-52) make[2]: Leaving directory /root/soft/mysql-5.1.53/libmysql' make[1]: Leaving directory/root/soft/mysql-5.1.53/libmysql' Making all in libmysql_r make[1]: Entering directory /root/soft/mysql-5.1.53/libmysql_r' make all-am make[2]: Entering directory/root/soft/mysql-5.1.53/libmysql_r' make[2]: * No rule to make target libmysql.c', needed bylibmysql.lo'. Stop. make[2]: Leaving directory /root/soft/mysql-5.1.53/libmysql_r' make[1]: *** [all] Error 2 make[1]: Leaving directory/root/soft/mysql-5.1.53/libmysql_r' make: * [all-recursive] Error 1

  Read the article

• Outgoing only SMTP server

  - by Din

  I want to setup on my Debian outgoing only SMTP server, so my Web-applications will be able to send mail via it. I don't want to use other hosts because of security and customizability of my own setup. I want to setup Postfix and configure it only in outgoing mode (I don't want it to be a relay). So I want to ask an advice how to do it in the best way. There's no need in users, virtual users, endpoints and other options that Postfix provides. I suppose that I should only attach Postfix to some hostname so my IP address can resolve to it. I also think that Postfix maybe a bit complicated solution for this task. If you know much simpler tool for it, let me know. Thanks.

  Read the article

< Previous Page | 175 176 177 178 179 180 181 182 183 184 185 186  | Next Page >