Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 2/287 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Error on restarting networking :SIOCSIFFLAGS

    - by Paddington
    I have a sever with 2 network cards, an internal IP on one card (eth0) and external IPs (aliased) on the other card (eth1). I lost connection the public network and I tried to restart networking with /etc/init.d/networking restart and got the error "SIOCSIFFLAGS: cannot assing requested IP and Failed to bring up eth1". I even added the IPs in the interfaces file but still got an error on restarting. I could not ping my default gateway. A work around was to add ifconfig eth 0 x.x.x.x route -add default gw x.x.x.z I could then connect to the public network. What could be the issue here?

    Read the article

  • Networking not starting - OpenVZ default Ubuntu 12.04 Template

    - by Stu2000
    I have been using HyperVM to deploy OpenVZ Ubuntu 12.04 server instances. Unfortunately, they all boot without networking enabled. I tried inserting int the crontab: @reboot /usr/sbin/service networking restart But this didn't work. Running this command (without @reboot) from the CLI will result in the network starting and being able to use commands like ifconfig so I get the feeling it is just a matter of the cron being called too soon? What is the best practice for resolving the issue. I am guessing something along the lines of adding an upstart job?

    Read the article

  • Troubles with start up defenition of networking service in Ubuntu

    - by Rodnower
    I use Ubuntu 12.04.1. I put attention that networking script starting in runlevel 0: user@comp:/etc/rc0.d$ chkconfig -l networking networking 0:on 1:off 2:off 3:off 4:off 5:off 6:off When I try to move it working to appropriate run levels I get error: user@comp:/etc/rc0.d$ sudo update-rc.d networking defaults update-rc.d: warning: networking start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none) update-rc.d: warning: networking stop runlevel arguments (0 1 6) do not match LSB Default-Stop values (0 6) System start/stop links for /etc/init.d/networking already exist. What should I do?

    Read the article

  • Apple Airport Express, Extreme and Time Capsules, BT Home Hub, Wireless Extenders confusion

    - by Jamie Hartnoll
    I post quite frequently in Stack Overflow, but use Superuser less frequently. Mainly as I don't change hardware often and rarely have software issues! I live in a small stone cottage, and have an office in a separate building across a yard. I have a BT Homehub which is located in the cottage and a series of Ethernet cables running across the yard to the office. This is fine for my wired stuff. My main office computers are PCs running Windows 7 Ultimate, and one on Win7 Home, all working fine. I also have an old laptop on Win XP which works fine wirelessly in the house for those evenings in front of the TV catching up on a bit of work. I also have an iPhone and an iPad. Recently, I have been trying to get WiFi in the office so I can use Adobe Shadow (or whatever it now is!) to improve mobile web development efficiency using my iPhone and iPad, so I bought this: http://www.ebuyer.com/393462-zyxel-wre2205-500mbps-powerline-wireless-n300-range-extender-wre2205-gb0101f Thinking that would be lovely just plugged into the socket by the door in the office, extending the perimeter of the WiFi from my Homehub. I can't get it to work properly! If I plug a laptop into its ethernet port I can get it to connect to the Homehub and give me a kinda of wired, wireless extender. If, however, I plug the ethernet port into my home hub, it then seems to extend the network, but only my iOs devices work, and all my wired stuff stops working, and seems to create an infinite loop where windows connects to my homehob, and then rather to the internet, it then connects back to the extender thing. Anyway... in the meantime, I took a fatal trip to the Apple Store, where I purchased an Airport Express... solely for the purpose of hooking my iOs devices up as wireless music players in the house. I knew it had WiFi, but didn't want to use that part as an extender, I didn't think it would work on a Homehub anyway. It doesn't work on a Homehub! I now have a new wireless network in the house, which, when anything connects to it cannot connect to the Internet, so it works ONLY as a wireless music player. I then borrowed some Powerline Adaptors from someone and realised that this whole thing was getting totally out of control! It seems all the technology is out there but it's so complicated to get the right series of devices. To further add to the confusion, I wouldn't mind a network hard drive. I bought one that broke and lost everything, so now we're on to looking at the Apple Time Capsules. So my question is... IF... I buy an Apple Time Capsule, can I: Hook that up to my Homehub, leaving the homehub connected to the Internet so my Hub phones still work, then disable wireless on the homehub Link up my Airport Express to the Time Capsule PROPERLY so it will connect to the Internet Do the above with an Apple TV box should I buy one in future Use the Time Capsule as a network hard drive to store video and music that can be viewed/listened to via my iOS devices/Apple TV/Aiport Express anywhere even with my main PC off (this currently stores all this data) Hope that the IOS devices like the WiFi from the TimeCapsule better than the Homehub and work without extension, or buy another Airport Express to get WiFI in the office. Or... should I buy an Airport Extreme and use a USB hard drive for the network drive?

    Read the article

  • How to use connectify to share files between 2 laptops, one running Windows 7?

    - by p2pnode
    I have 2 laptops one running XP and another Windows 7. Both have WiFi-card installed. I want to be able to share files between these 2 machines and then in next step also be able to share internet connection. I have heard that Connectify on Windows 7 is a very handy and easy tool to set up a hotspot and other machines even XP,Vista can connect to this host hotspot and share files and internet connection. I am able to search for the network (set on host) on my client machine. But how to share files? I don't see any such menu or anything. Also after I have installed connectify on Windows 7, I am not able to connect to internet using data card. It throws error that "Error 31:A A device attached to the system is not functioning". And on client machine, if I connect to data card, as well as connect to wireless network setup by host machine, I no longer am able to access internet, even though the data card is connected. The browser throws error: Please help. Any other utility similar to connectify etc?

    Read the article

  • Unable to ping local machines by name in Windows 7

    - by aardvarkk
    I'm having a strange (and persistent!) problem with pinging local machines on my network by name. I believe my machine (Windows 7 64-bit) is the only one having this issue. This is over a wireless connection. As an example, consider a device on my network by the name of WDTVLiveHub. It's a Western Digital Live Hub (surprise!). If I go to my router's DHCP Client Table in the browser (my router is a WRT400N), I see this entry: WDTVLiveHub 192.168.1.101 Great. So I try to ping that IP address: ping 192.168.1.101 Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=9ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Reply from 192.168.1.101: bytes=32 time=16ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 9ms, Maximum = 16ms, Average = 14ms OK, still looking good. Now I try to ping it by name: ping WDTVLiveHub Ping request could not find host WDTVLiveHub. Please check the name and try again. From what I've read, this implies a problem with DNS servers and host name lookups. Interestingly, if I type the following: pathping 192.168.1.101 I get this output: Tracing route to WDTVLIVEHUB [192.168.1.101] over a maximum of 30 hops: 0 Scotty [192.168.1.103] 1 WDTVLIVEHUB [192.168.1.101] Computing statistics for 25 seconds... Source to Here This Node/Link Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address 0 Scotty [192.168.1.103] 1/ 100 = 1% | 1 12ms 1/ 100 = 1% 0/ 100 = 0% WDTVLIVEHUB [192.168.1.101] Trace complete. Scotty is obviously the name of my local machine. So it's able to find the name somehow when I do that approach... ipconfig /all shows the following under DNS servers: DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** Where the * represents the same DNS servers that show up in my router under DNS 1 and DNS 2 through the Internet. For completeness, here's the whole output of ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : Scotty Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Peer-Peer IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Dell Wireless 1397 WLAN Mini-Card Physical Address. . . . . . . . . : 0C-EE-E6-D1-07-E8 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2002:d83a:31e5:1234:5592:398e:8968:43d1(Preferred) Temporary IPv6 Address. . . . . . : 2002:d83a:31e5:1234:ecce:2f79:72a5:5273(Preferred) Link-local IPv6 Address . . . . . : fe80::5592:398e:8968:43d1%26(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.103(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : September-17-12 11:05:57 PM Lease Expires . . . . . . . . . . : September-18-12 11:05:57 PM Default Gateway . . . . . . . . . : fe80::200:ff:fe00:0%26 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 537718502 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : 192.168.1.1 ***.***.***.*** ***.***.***.*** NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter VirtualBox Host-Only Network: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : VirtualBox Host-Only Ethernet Adapter Physical Address. . . . . . . . . : 08-00-27-00-98-9A DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::b48a:916b:c0f:fb29%23(Preferred) Autoconfiguration IPv4 Address. . : 169.254.251.41(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 570949671 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-12-80-3D-D7-00-26-B9-0D-08-70 DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter Local Area Connection* 15: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{55899375-C31D-4173-A529-4427D63FD28B}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{64B8F35F-A6AB-4D6B-B1D5-DD95F57B1458}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Not sure exactly how to diagnose exactly what's going on... but the problem is really frustrating! The biggest problem is that my mapped network drives have to be done by IP, and then any time the router assigns new IP addresses to those devices, all of my network shares break again. Stinks! Would love some assistance on possible solutions. I've tried all of this netsh catalog resetting and that didn't seem to fix anything at all. Would love an explanation of what's going wrong, too, rather than blindly resetting things! Thanks!

    Read the article

  • How to bypass firewall to connect to a proxy server?

    - by Bruce
    I am conducting a small experiment on my office network. I have setup a proxy server on my desktop machine (connected to my LAN) and I have volunteers access the internet via my proxy server. Everything is working well. The problem is people cannot connect to the proxy server through their laptops. I asked my network admin and he said the wireless network has a firewall which prevents users from connecting to my proxy. He said I could tunnel the traffic or use SSH though. I am afraid I do not understand fully what is going on. Is there a way by which users connected on the wireless network can connect to my desktop? I am using FreeProxy on Windows as my proxy server: http://www.handcraftedsoftware.org/index.php?page=download FreeProxy allows me to create a SOCKS 4/4a/5 proxy. Is that what I need? Part of the experiment involves logging the URL requests of the users. I am doing a measurement study. So, any solution must allow me to log the URL requests of users. Also, what changes do I need to make in the browser configuration.

    Read the article

  • Advice needed for a home network setup (hardware & software) to handle many clients and potentially heavy traffic

    - by posdef
    I have recently decided to re-structure the home network of our flatshare here. Here's a quick outline of the situation. I envision to have the following 4 devices connected to the router via cable: Xbox 360 IP phone Printer QNAP server (Web, File and Multimedia) We are three people living here, so on top of that there will be to 5-6 computers/mobile devices connecting as wireless clients. My goal is to be able to transfer files (when needed) between the computer and the Multimedia server, which I can reach via 360 and play on the TV. I also would like to keep a high level of security; right now I have the encryption on WPA2 and MAC filtering. I don't believe the web server will get heavy traffic, though I would like to have it responsive. Likewise, I don't have a habit of downloading via torrent etc, but I greatly appreciate my network being responsive and fast, especially when I am browsing or streaming high quality media. Now my questions are: is this setup feasible? smart? efficient? can this be improved somehow? my current router (D-Link DI624) and the previous one (DI-524) used to have spontaneous drops in network, which I find highly irritating. I don't believe in my router, especially now that it completely crashed when I was test-running the setup by transferring a large media file to server while xbox was playing music from the server, and two computers browsing the net. Do I need to get new hardware, if so, any recommendations for a reliable and fast router?

    Read the article

  • Connected 2 routers, but they won't talk

    - by ekolis
    I'm trying to set up a second WLAN at home (since the Nintendo DS firmware won't connect to my WPA-encrypted main WLAN), but when I connect my second router's WAN port to one of my main router's LAN ports, the routers won't talk, and I can't connect wirelessly to the second router. I can still see the second router's WLAN - I am just unable to connect to it. And it seems that even the main router can't see the second router, despite being plugged directly into it - I went to the main router's admin console and pinged the second router (which is receiving an IP address), but it was unable to reach it! Does anyone know what might be wrong? Thanks!

    Read the article

  • Port Forwarding(?) TD-W8961nd

    - by rich
    I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

    Read the article

  • Making a home group

    - by Siddharth Warrier
    I have two computers in my house they are laptop and desktop and I use internet which is of wired connection and it has a modem. The modem has 1 LAN port and 1 USB port. So what I did is that I connected the desktop to the LAN which had Windows 7 Home Premium OS and Laptop to the USB which had Windows 7 Home Basic. As home group can be made with windows 7 home premium and above versions I made it via desktop. The home group was established and the data can be exchanged.But one problem I was able to access internet in desktop but not in laptop. So I tried to share internet but I am not able to do so..... So anyone there to help me ???????

    Read the article

  • Android Design - Service vs Thread for Networking

    - by Nevyn
    I am writing an Android app, finally (yay me) and for this app I need persistant, but user closeable, network sockets (yes, more than one). I decided to try my hand at writing my own version of an IRC Client. My design issue however, is I'm not sure how to run the Socket connectivity itself. If I put the sockets at the Activity level, they keeps getting closed shortly after the Activity becomes non-visible (also a problem that needs solving...but I think i figured that one out)...but if I run a "connectivity service", I need to find out if I can have multiple instances of it running (the service, that is...one per server/socket). Either that or a I need a way to Thread the sockets themselves and have multiple threads running that I can still communicate with directly (ID system of some sort). Thus the question: Is it a 'better', or at least more "proper" design pattern, to put the Socket and networking in a service, and have the Activities consume said service...or should I tie the sockets directly to some Threaded Process owned by the UI Activity and not bother with the service implementation at all? I do know better than to put the networking directly on the UI thread, but that's as far as I've managed to get.

    Read the article

  • How to start a task before networking?

    - by user1252434
    I've written an upstart task that modifies /etc/network/interfaces. (Actually a file sourced into it.) Which start on condition do I need to declare to let my task run before any networking jobs? I've tried start on starting networking, but that's apparently too late. When I log in after booting I can see that the changes were written, but obviously they are not used: the new config states a static IP, but the boot process waits for a non-existing DHCP server (old config) to time out. I've also tried start on starting network-interface INTERFACE=eth0, which didn't work either. IIRC there was an error in the log that the change couldn't be written. Background: I need a VM template that can be cloned and the clones configured through a script. Among other settings, I need to give them a static IP address to access them from the host. I use guestfish to write a config file to one of the virtual disks and let a script apply these settings to the system. I don't want that disk to contain an actual system settings file. I can't modify /etc directly, because that disk is shared (copy-on-write/diff) among the clones and guestfish apparently doesn't support that type of image. I could also let them use DHCP and setup a server that assigns IP by MAC, but I'm afraid of the complexity. I could also add just another virtual disk for configuration files, but if possible I'd prefer to store settings directly on the system disk image. Used software: Ubuntu Server 12.04, VirtualBox. The configuration modifier is a self written ruby script.

    Read the article

  • Networking for RTS games with lockstep using UDP

    - by user782220
    Apparently from what I can gather Starcraft 2 moved to UDP in a patch. Now obviously with fps games there is no dispute that UDP is the only way to go. But with RTS games what benefits does UDP give over TCP given that the network model is lockstep? I suppose another way to phrase this is: what features of TCP make TCP inferior compared to UDP with resend, etc. implemented in the context of rts lockstep networking model?

    Read the article

  • Installed Ubuntu on a Intel I5 3330 (over a dh 77eb motherboard), networking fails

    - by Siddharth
    To my surprise network fails after Ubuntu installs. modprobe e1000, did not get networking to kick off modprobe e1000e, too did not load Searched for the drivers on the intel site, no linux drivers listed. lspci reports 00:19.0 Ethernet controller [0200]: Intel Corporation Device [8086:1503] (rev 04) Any idea on how to proceed ? Is there a place where I can map driver names (like e1000, e1000e) with the model numbers ?

    Read the article

  • XNA: Networking, what is a good bytes per second sent/received number

    - by SimpleRookie
    I am working with XNA networking, on the XBOX. I was wondering what is a safe number to stay under in the bytes sent and received when it comes to the xbox. Obviously various factors will effect the number, and you want as little packet data as possible to keep things smooth, but what is a good number for that? (Using : networksession.bytespersecondsent and networksession.bytespersecondreceived to measure the number.)

    Read the article

  • Bluetooth Dial-Up Networking using Blueman

    - by leemes
    I want to configure a dial up network connection via bluetooth to my phone in order to access the internet. I use Lubuntu 12.04 (Ubuntu with LXDE) which has the Network Manager Applet and Blueman applet installed. I guess these are the same tools than on an Ubuntu installation, hence I ask my question on this site. My phone is a Sony Ericsson W810i, my laptop is a Lenovo S10-2, my mobile phone provider is o2 Germany. I scanned for my mobile phone using the Blueman applet. I connected the dial-up network via the context menu - Serial Ports - Dial-up Networking. A notification bubble says that the connection is available on the interface named ppp0. ipconfig is telling something different: There is no ppp0 or something similar. I only see my eth0 (wired ethernet), eth1 (wifi) and lo interfaces. Of course, I can't ping google.com as the interface really seems to be not present at all. When the dial-up network is being connected, my mobile phone says that it connects to the internet. Afterwards, I see the active connection on the phone's screen. When successfully connecting with the phone using another computer, it behaves exactly the same, so I guess that the phone isn't the problem. I don't know if I configured the Dial-Up correctly. I use the phone number *99# which is very common on most mobile ISPs. I use the APN which my ISP is telling me to use. (I can't find the number on their support page, so I just use the default value *99#.) My mobile ISP is o2 Germany. There are How-Tos out there which use the Network Manager Applet to setup a bluetooth dial-up connection, but I can't see any bluetooth devices in the context menu as on the screenshots in those How-Tos. Do you have any suggestions what might be wrong / what I should try? EDIT: When choosing "Network Access Point" in the device's context menu instead of Serial Ports - Dial-Up Networking, an interface bnep0 appears. However, neither an IPv4 address is assigned for that interface (but IPv6), nor the phone connects to the internet. Am I missing something? Can I connect to the internet after setting up this network connection?

    Read the article

  • Box2D networking

    - by spacevillain
    I am trying to make a simple sync between two box2d rooms, where you can drag boxes using the mouse. So every time player clicks (and holds the mousedown) a box, I try send joint parameters to server, and server sends them to other clients. When mouseup occurs, I send command to delete joint. The problem is that sync breaks too often. Is my way radically wrong, or it just needs some tweaks? http://www.youtube.com/watch?v=eTN2Gwj6_Lc Source code https://github.com/agentcooper/Box2d-networking

    Read the article

  • "/etc/init.d/networking restart" with non-root user

    - by bonchen
    I have a thin client with 112mb RAM which boots ubuntu server 12.04.1 from a usb drive with openbox and it is to be used by students to communicate with cisco equipment. And because of this the students need to be able to reconfigure the network interface and then restart it without a reboot using the only user - cisco. This is what I have so far: adduser cisco usermod -a -G dialout cisco chown root:cisco /etc/network/interfaces chmod 664 /etc/network/interfaces chmod u+s /sbin/shutdown chmod u+s /sbin/reboot chmod u+s /sbin/poweroff chmod u+s /run/network/if* chmod u+s /sbin/ifdown chmod u+s /sbin/ifup And when I run /etc/init.d/networking restart as cisco I get: *Reconfiguring network interfaces... rm: cannot remove `eth0.dhclient': Permission denied Failed to send flush request: Operation not permitted RTNETLINK answers: Operation not permitted Any ideas on how to get this working? Thanks!

    Read the article

  • Virtualbox: host only networking - proxy internet connection

    - by Russell
    I'll ask my question first, then give details about where I am coming from: Is it possible to use host only, then have ubuntu act as a proxy to provide internet access to windows? If so, how? I am trying to get the right combination of networking for my virtualbox windows client VM (win7). My host is ubuntu 10.10 (maverick). I believe I understand the basic network options (please correct me if I am incorrect): NAT - Host can't communicate with guest but guest has access to all host's adapters Host only - Separate adapter but guest has no net access Bridged - bridge an adapter in the host with the virtual adapter to give the host access to the host adapter I am trying to give my win guest internet access, but also access the host in a separate network. Bridged only works when the host is connected to the internet (this is a laptop) so when it's not connected the network is down. Thanks I appreciate your help.

    Read the article

  • Database vs Networking

    - by user16258
    I have completed my diploma in (IT) and now pursuing degree, i am in last semester of my B.E(I.T). I want to do specialization either in Database(oracle) or in Networking(cisco). Which one of two will be in more demand in near future, i know it's all about interest but still i would like to know your opinion. Most of people say that a network engineer is never paid as better as a programmer or a DBA, and few says they do get paid well. What would be the scope if i clear my CCNA and CCNP exams, or either OCA & OCP exams, what would be more rewarding. Also i have read somewhere that most of the task of DBA will be automated so in future demand of a DBA will reduce. I would also like to hear from Network engineers what's the scenario out there in India. Thanks

    Read the article

  • Enable networking without the gnome-applet

    - by Ikke
    I've switched to XMonad as my window manager. Sometimes when I put my laptop to hibernate, it's hanging and won't shut down. I have to force it off by pressing the powerbutton for 5 seconds. After I boot again, I can't connect to the internet. I have to logout, go to gnome, and after logging in, I rightclick the network applet icon and select the enable networking options. After that, my internet is working again. Is there a way to do this via the command line or another option?

    Read the article

  • frame lock networking

    - by kochol
    I'm developing an RTS game and I want to add multiplayer support to my game. I picked the easiest technique to implement for start frame locking technique. I used server client networking architecture (I think it's my first mistake I think using peer to peer is a better one for this) On game update every clients send their commands and maybe receive some command then render the frame and wait for all clients to send their update complete message then all of them can go for the next frame. I send commands and all logic is calculated on the clients based on commands but the clients can go out of sync easily. Every AI controlled units make different decisions on each clients What I have to do to sync my game? Do you suggest me a better network architecture or technique?

    Read the article

  • What good Social Networking Site solutions there is?

    - by ZetsubouWebmaster
    What good free Social Networking Site solutions there are? I tried many options but most of them are either too complicated, too simple, or just do not work... I tried: Dolphin, DZOIC-Handshakes, elgg, Oxwall, SocialEngine, and some plugins for wp and other cms. I don't need much, just: groups, chats, forums, profiles, PM, photos, pages, comments, search, statistics. Most of which included in pretty much every CMS out there... but not all... So, what good solutions there are? Also I don't mind paying some money (i guess no more then 200$), but I'd prefere if it was a free open source engine. Of course it should be php+mysql based.

    Read the article

  • xna networking, dedicated server possible?

    - by Jake
    Hi I want to release my xna game to the XBOX platform, but I'm worried about the networking limitations. Basically, I want to have a dedicated (authoritative) server, but it sounds like that is not possible. Which is why I'm wondering about: a.) Using port 80 web calls to php-driven database b.) Using an xbox as a master-server (is that possible?) I like the sound of [b] , because I could write my own application to run on the xbox, and I would assume other users could connect to it similar to the p2p architecture. Anyone able to expand on theory [b] above? or [a] as worst-case scenario?

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >