Search Results

Search found 3985 results on 160 pages for 'hd dvd'.

Page 20/160 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Windows 7 installation asks for DVD drivers

  - by koen

  I have installed Windows XP on my machine (Company CQ5020NL). Before I was able to do that, I set the SATA controller to IDE in the bios. Now I want to install Windows 7 upgrade. The DVD boots into the installation setup, but when I click "Install now" and am asked to load "A required CD/DVD drive device". When I click "Browse" I can browse the installation dvd and the drive I want to install to. I have tried all the SATA options in the bios already. I have no idea what to do... can anybody help me out?

  Read the article

• ATI / AMD HIS HD 7870 Graphics card fan speed below 16% / 20% 26%

  - by Thorsten Niehues

  I bought a AMD / ATI HIS HD 7870 to replace my old HD 4870. I noticed that the fan speed does not scale with the temperature: The fan speed does not get below 28% (read from catalyst / automatic fan speed) If I manually change it in the catalyst to 20% then it has the same speed than 28% : about 900-1000 rpm. With HIS iTurbo i manually can change the fan speed below 20%. But I noticed that changing the fan speed below 16% results in 3200 rpm. This is really stupid and annoying since my PC is a ultra silent PC and all fans are running with about 500 rpm when the PC is idle (windows / musik movies, etc.) Is there any way to change the fan speed to a reasonable speed like 500 rpm by software or hardware adapters (I really don't like to put a poti between the 12V line)

  Read the article

• Fix Video timelines

  - by Josh

  So, I have been going through and riping all of my DVD's and it seems that the way to get the highest quality out of these is to have DVD Shrink de-encrypt, rip, and decompress, the DVD's. After that I usually end up with a high quality (high size) set of .vob files in a classic DVD structure. Then I use a python script that I wrote to automate the process of finding the title sequence and then combining all of the title sequences' .vob files together into one file(similar to the "copy /b" command in windows), and then changing the extension to .mpg (a more widely supported format then .vob). This allows me to get a high quality rip in about 40 min. The problem comes in playing the files. I need all of the ripped dvd's to play on my media computer using windows media center but windows media center (and vlc for that matter) all think that the video files are anywhere from 5 min. to 0 min. which is not a problem (the video will still play all the way through) but if you want to pause it, when it is unpaused the video will start all the way over (Also fast forward and rewind don't work). I suspect that it is something wrong with the way the timeline is encoded in the video file, various forums on the internet recommended using virtualdub to fix the errors. But when I try to open the file virtual dub says that the file is not in mpeg-1 encoding and may be in mpeg-2. Is there any way to fix this? PS: I am aware that there was a similar question but it hasn't had any activity for 2 months and is dealing more with wmv files.

  Read the article

• Accessing multiple local HD's or RAID with ESXi 4.0

  - by Shawn Anderson

  How to I get additional HD's to be recognized and used by ESXi 4.0. When I purchased my system I had two 2TB HD's, but when I installed ESXi it only recognized one of them. I'm happy to get whatever number of drives that I need (I have a four bay SATA in my Dell T310). What are some options? RAID? If so, is it supported. I guess I would need hardware instead of software since ESXi is so small. The VMWare forums (where I've lived for the last two days) are a charlie foxtrot of outdated and conflicting info. I want to utilize my T310, with 32 GB RAM, 2.8GHz quad core to run many lab Windows VM's. I don't need production level availability but I do want decent performance, even though it's in a lab environment. A huge thanks to Jim B., Zypher, Helvick, and Jeff Hengesbach who posted answers to my earlier predecessor question on why ESXi was so sluggish.

  Read the article

• Utility to optimally distribute files onto multiple DVDs?

  - by Alex R

  I have a bunch of media files which I want to record to DVD, but since each DVD only fits 4.5GB, I have to find the optimal way to organize the files to use the minimum number of DVDs (otherwise the empty space left in each DVD can easily add up). Are there any tools to help with this? Many years ago there was a DOS utility to do this with floppy disks.

  Read the article

• CentOS ISO DVD self-disc-check failing

  - by Jakobud

  I downloaded a CentOS 5.4 DVD ISO from one of the official mirrors. The MD5 sum is correct for the iso file that was downloaded. I burned the ISO onto a DVD+R using ImgBurn. I got no errors during the burning process and it says it finished burning successfully. When booting a server using this DVD to install CentOS on it, the first thing I did was run the self-disc-check (where it checks the files to make sure its genuine, etc). It failed. Didn't really say why. Am I doing something wrong here? Or is there someplace I can see why its failing? If the MD5 is correct and I don't get any burning errors, how can it be failing its own self-check mechanism?

  Read the article

• HD read error while booting linux

  - by sidharth sharma

  I have been dual booting windows 7 and ubuntu on my laptop since the past 3 years and all was working fine until I started getting logs like ata1.00: status: { DRDY ERR } ata1.00: error: { UNC } ata1.00: configured for UDMA/133 sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense key: Medium Error [Current][discreptor] I figured it was a hardware problem and ignored it as long as I could until the HD crashed on me. Then I got a brand new HD and put on windows and ubuntu afresh on it but the problem still persists. Any Help?

  Read the article

• HP dv9000 Vista laptop won't boot from CD/DVD drive

  - by ScottEdwards2000

  My HP dv9000 Vista laptop recently got the BSOD with error 0x0000c1f5. The only way to fix this error is to be able to boot from CD/DVD and use some repair software I have. The problem is that the laptop REFUSES to boot from any CD/DVD I try. I've changed the boot order so the CD/DVD is first, and I can hear the drive spin up a bit upon power-up, but after a second, it spins down and then the laptop tries to boot from hard drive. Any ideas? (I've tried lots of CDs so it's not the media itself) Thanks much!

  Read the article

• how to reinstall Asus notebook using Recovery DVD?

  - by Radek

  a friend of mine asked to reinstall his Asus notebook. He didn't want Vista anymore so I installed XP. Re-partitioned the hdd (no more recovery partition). Everything went fine except I cannot make LAN card work. I created a question for that. And I talked to Asus help desk but it didn't help so we decided to go back to Vista. I have the original Recovery DVD for his notebook. With files like ASUS.SWM and ASUS2.SWM. But I do not know how to use this DVD to reinstall his notebook. Did I mention that his DVD drive mostly doesn't work?

  Read the article

• How to burn a 8.5GB ISO?

  - by Vilx-

  I have an ISO image of a DVD which is 8.5GB in size. I find this strange, because that is about 500MB more than a standard DL DVD can hold. I tried overburning with Nero, but it failed. Is it possible to somehow burn such an image? Are there some special DVD blanks that allow you to write more? Or is this ISO simply made by some tool without any regards of whether it can be burned or not?

  Read the article

• Intel HD 4000 driver not working

  - by Sagar Parakh

  I have a Dell Inspiron 15r se 7520. I have upgraded my system to Windows 8.1 few days back. After the upgrade, my Intel HD 4000 graphics driver stopped working. I have downloaded the latest driver from Dell website but during installation it said that my graphics driver is not compatible or validated and also my dedicated graphics driver AMD ATI Raedon HD 7730m also stopped working. There is also a problem with my screen brightness: I am unable to change it. How to make my graphics driver work?

  Read the article

• Copied XEN vm to new host - boots up asking to fix the HD (win2003 guest)

  - by Mister IT Guru

  I have an old box running CentOS 5.4, and XEN. It has a 2003 Guest that I wish to move over to another CentOS box running XEN. I stopped the machine, and have SCP'd the HD image files of the guest to the new host. I ran md5sum on the files, and they are identical. When I configure a new Guest, it fires up, but windows fails to boot asking to fix the system instead. The HD are identical, so I'm guessing there is something that I missed. I don't want to go through this procedure, because the system needs to be identical. How can I get one VM to run seamlessly on another host? Any ideas, and comments are 100% appreciated. Thank You

  Read the article

• Question about getting information off an old HD...

  - by user37983

  Ok so my old cpu was a sony vaio. its kinda old and had xp on it. My gf thrashed it - the cd drive went and she tried fixing it by messing with the configurations bios etc. the actual laptop is really fried the keyboard doesnt work, etc. However the harddrive is still intact. I tried putting the HD in my new cpu (toshiba runnig win7) and it looks like its gonna boot up it goes to the screen with the logo and the status bar starts to load. then it flashes a blue screen for a split second, and goes to the black screen where it says windows did not shut down properly and gives options to (start windows normally, safe mode, safe mode with networking, safe mode with prompts) ive tried every option but it always goes back to this screen. I need to get into the hd cuz i have very important files. is there anyway?

  Read the article

• Have optical drive connectors changed in the last year?

  - by Zippityboomba

  In early 2010 my motherboard freaked out, and I was able to drop in a new board and connect my two DVD drives that were initially bought in 2005. Tonight my new components arrived to build my next system, and I figured I'd just reuse the old DVD drives. Surprise, the long flat connector cable has no mate on the new motherboard. Reckon I'll just pick up a new DVD drive for $25, but what gives? Thanks!

  Read the article

• Driver proboems for SH-S203N Samsung DVD drive

  - by dircowander

  My father jsut bought me a dvd burner Samsung SH-S202N OEM and installed it into my computer. The drive seems to be able to burn media fine. But when it comes to reading dvd's, audio cd's, it just skips. It can read them it is just skipping so badly to the point where the dvd's are unwatchable and cd's skip rather bad. I am looking for the latest firmware or driver for the Samsung SH-S202N OEM. Any advice? Thanks in advance. :)

  Read the article

• ATI HD 5970 display

  - by user55406

  Hello everyone i'm a little worry about my graphic card. before I get into that I will tell you my system specs. I have intel dx58so mainboard, 6gb corsair xms ddr3 ram, intel i7 960 cpu, and ati hd 5970. I'm also using a coolmaster haf92 case. My OS is vista X64. Here is my issue when I type in dxdiag in (Start Search) and I look into display. I see in (approx total memory) 716mb graphic memory. The ati hd 5970 is a 2gb graphic card. Am I being stuipd or is there an issue.

  Read the article

• "sr0" I/O read boot error in Xubuntu 12.10

  - by Entropicurity

  Just recently upgraded Xubuntu 12.10 after having installed 12.04 originally. Ever since that happened, any time I inserted a disk into my DVD/CD reader/writer I would end up getting a number of error messages from my DVD player/Audio player softer, typically with any of them either crashing or returning a GStreamer backend error. So doing some research I tried to mount it manually, and it typically returned the error messages you'll see below: (using the dmesg | grep "sr0" command) [17545.435584] end_request: I/O error, dev sr0, sector 0 [17545.492968] sr 3:0:0:0: >[sr0] [17545.492981] sr 3:0:0:0: >[sr0] [17545.492992] sr 3:0:0:0: >[sr0] [17545.493003] sr 3:0:0:0: >[sr0] CDB: [17545.493020] end_request: I/O error, dev sr0, sector 0 [17545.493058] EXT3-fs (sr0): error: unable to read superblock [17545.553224] sr 3:0:0:0: >[sr0] [17545.553237] sr 3:0:0:0: >[sr0] [17545.553247] sr 3:0:0:0: >[sr0] [17545.553258] sr 3:0:0:0: >[sr0] CDB: [17545.553275] end_request: I/O error, dev sr0, sector 0 [17545.553312] EXT4-fs (sr0): unable to read superblock [17545.611482] sr 3:0:0:0: >[sr0] [17545.611494] sr 3:0:0:0: >[sr0] [17545.611504] sr 3:0:0:0: >[sr0] [17545.611514] sr 3:0:0:0: >[sr0] CDB: [17545.611531] end_request: I/O error, dev sr0, sector 0 [17545.611568] FAT-fs (sr0): unable to read boot sector When I grepped this, the number of error messages just seemed to spill all over the screen, and typically all revolve around the I/O error. I then went into VLC and tried to run the stuff through there, but for some reason it won't read with the default devices. Instead I have to manually input sr0 into each of the /dev/ references and it will play just fine, until I exit out of the program, at which point I have to re-input everything. I have already installed all the media dependencies, both open source and restricted, through the software center. I just found this strange, as out of the box 12.04 there wasn't any problem what so ever. At this point, it could be that all my audio CD's are not in a format that is familiar with the OS (I've read in some places that EXTF4 has issues with this) but I don't see how that could be a problem when the above error messages even tested to see if it is EXT3 as well? I've tried my best to troubleshoot this up till now using existing topics, but it seems that this is a regular problem with a multitude of varying factors that incorporate into it, including but not limited to read/write problems with the format of the CD and right protection. Is there something integral that I am missing?

  Read the article

• NIC are not advertising Correct Speeds

  - by Squidly

  I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• macbook pro 13"

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• Switching to a 7200rpm drive -> constant spinning?

  - by LINUX

  Hej Bytte nyligen HD 250GB till 640GB 7200rpm nu har jag bara ca.5 tim battery tid ... och HD snurrar hela tiden. hur kan jag sova ner Hd efter t.ex. 5 minuter ? Tack på förhand. English Translation: I recently switched from a 250GB to 640GB 7200rpm hard drive. Now I only have a 5hr battery life and the hard drive is spinning constantly. How can I spin down the hard drive for, for example, 5 minutes? Thanks in advance.

  Read the article

• Set Final Cut Express Sequence Options 4:3 to 960p (30fps)

  - by Maccaius

  Hi I have an project in FCE which was recorded in MPEG-4 video in 1280 x 960 (1,4MB/s) and whenever I import those mov files to FCE thez show just fine. but when i add the clips to the timeline (sequence) the quality is cropped - instead of HD i can onlz export the timeline with quicktime conversion and a resolution of 720 x 480. can anybody help me out and tell me how i can export the timeline in full HD quality (as the raw material itself is)? tried the quick setup and exporting as divx and AIC which doesnt reallz work. the actual video size is HD, but qualitz of the video is like SD...

  Read the article

• VM on Windows 7 Virtual PC cannot access host’s DVD Drive

  - by Gustavo Cavalcanti

  I have a brand new clean machine with Windows 7 Professional 64bit and I've installed the patch that adds Windows Virtual PC (Windows6.1-KB958559-x64). I then go to Windows Virtual PC, create a new Virtual Machine. As soon as go to settings and try to map the VM DVD drive to the host's DVD drive I get "File may be in use by another process or you may not have sufficient access privilege". I am an administrator in that box... What am I missing?

  Read the article

• New VM on Windows 7 Virtual PC cannot access host's DVD Drive

  - by Gustavo Cavalcanti

  I have a brand new clean machine with Windows 7 Professional 64bit and I've installed the patch that adds Windows Virtual PC (Windows6.1-KB958559-x64). I then go to Windows Virtual PC, create a new Virtual Machine. As soon as go to settings and try to map the VM DVD drive to the host's DVD drive I get "File may be in use by another process or you may not have sufficient access privilege". I am an administrator in that box... Help please!

  Read the article

• Installing Ubuntu Server fails to detect SATA CD/DVD Drive

  - by Simon

  O/S: Ubuntu 8.04 Server LTS Drive: Lite-On SATA CD/DVD Burner, DS-8A4S Motherboard: Supermicro x8ste Booting from the CD/DVD works fine, but the installer fails to detect the drive.

  Read the article

• Proper 16:9 video size for non-HD 4:3 video (for youtube/vimeo)

  - by Xeoncross

  Since High Definition video came out on all the online sites it has changed the default aspect ratio of the player from 4:3 to 16:9. This means that for people posting SD video you have to resize some of your videos to get them to fit right. For example, NTSC DVD quality (aka 480i/p) is 720x480 pixels (width x height). However, low-end High Definition (720i/p) is 1280x720. Resolution Chart Anyway, now that the video players are built for HD you will find that uploading standard quality videos will result in videos that are "letter boxed" which means they have extra black bars on the top and bottom (or sides). Correct me if I'm wrong, but in order to get a 720x480 video to fit a box that is designed for HD the best practice would be to crop some of it off so that it fits as 720x404 since: 16/9 = 1.78 (1.7777777777778) 720/405 = 1.78 405x1.78 = 720.9 The same would stand for 640x480 (old TV quality) video that would need to be 640x360 correct? I'm asking because I'm not sure about all this and whether this is the proper way to fix these letter-boxing/display problems.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >