Search Results

Search found 7976 results on 320 pages for 'sl dev'.

Page 20/320 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• No GRUB Screen or recovery mode on Boot after 12.04 Upgrade

  - by Nick

  I tried the live boot CD and boot-repair, also loaded the Desktop install CD, and it looks like all partitions check out OK. However, when I try to boot Linux (the only bootable partition on the computer) I get a blank screen. Every so often the screen give me something akin to: Assuming write through cache Asking for cache data failed it appears to start booting, then hangs. Ctrl+Alt+Delete shuts down the machine The last message during boot is "STarting TiMidity++ ALSA midi emulation... [OK]" I used boot-repair to generate a boot info report. One thing looks odd to me- it reports a missing core.img on /dev/sda1. Here is the full info: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info August 2nd 2012] ============================= Boot Info Summary: =============================== = Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive. = Windows is installed in the MBR of /dev/sdb. sda1: __________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda1 and looks at sector 18406911 of the same hard drive for core.img, but core.img can not be found at this location. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/extlinux/extlinux.conf /boot/grub/core.img sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: swap Boot sector type: - Boot sector info: sdb1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 307,339,514 307,339,452 83 Linux /dev/sda2 307,339,515 312,576,704 5,237,190 5 Extended /dev/sda5 307,339,578 312,576,704 5,237,127 82 Linux swap / Solaris Drive: sdb _______________________________________ Disk /dev/sdb: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 2,048 625,142,447 625,140,400 7 NTFS / exFAT / HPFS "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 11b4d633-7863-40b2-a6ca-da5f82c3ad0b ext4 /dev/sda5 cb8d65f4-8cf9-4088-b804-e3dea2151033 swap /dev/sdb1 349E7C109E7BC8BE ntfs Personal1 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sdb1 /media/Personal1 fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions) /dev/sr0 /live/image iso9660 (ro,noatime) ...(a bunch of config file info- let me know if anyone wants to see it!) But usually I just get "Cannot Display This Video Mode", which I know means the video output is not usable by the monitor. I'm looking for a way to get into a recovery mode.I'd really like to avoid wiping the drive. Any thoughts?

  Read the article

• ?Linux 6???UDEV??RAC ASM???????

  - by Liu Maclean(???)

  Maclean?????UDEV??ASMLIB?RAC???????????,???????????????????:Why ASMLIB and why not???UDEV????RAC ASM?????  ?«??UDEV????RAC ASM????? »???????????????,????????udev rule????: for i in b c d e f g h i j k ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id -g -u -s %p\", RESULT==\"`scsi_id -g -u -s /block/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ?????Linux 5?????, ????????redhat/Oracle Linux 6???????????? ????: ?OEL6??RHEL6?,????????? ??????:1. scsi_id??????????,scsi_id -g -u -s??????????2. udevtest???????,????udevadm??How to use udev for Oracle ASM in Oracle Linux 6   ???????????,???redhat/Oracle Linux 6??????udev rule ????: 1. #????? Linux 6.0???? [root@vrh6 dev]# cat /etc/issue Oracle Linux Server release 6.2 Kernel \r on an \m 2. #?????/etc/scsi_id.config echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config 3. #?????????udev?? [root@vrh6 dev]# ls -l sd* brw-rw----. 1 root disk 8, 0 Jun 30 09:29 sda brw-rw----. 1 root disk 8, 1 Jun 30 09:29 sda1 brw-rw----. 1 root disk 8, 2 Jun 30 09:29 sda2 brw-rw----. 1 root disk 8, 16 Jun 30 09:29 sdb brw-rw----. 1 root disk 8, 32 Jun 30 09:29 sdc brw-rw----. 1 root disk 8, 48 Jun 30 09:29 sdd brw-rw----. 1 root disk 8, 64 Jun 30 09:29 sde brw-rw----. 1 root disk 8, 80 Jun 30 09:29 sdf ??????? sdb-> sdf???????? 4. ? b->f?????for ???,??: # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" done ????sdb->sdf ?????RULE,????RULE???/etc/udev/rules.d/99-oracle-asmdevices.rules? ??????????? ,??RULE?99-oracle-asmdevices.rules # AUTO UDEV RULE BY Maclean Liu 2012/06/30 for i in b c d e f ; do echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules done 5. ?????root??/sbin/start_udev ?? ??????: [root@vrh6 dev]# echo "options=--whitelisted --replace-whitespace" >> /etc/scsi_id.config [root@vrh6 dev]# for i in b c d e f ; > do > echo "KERNEL==\"sd*\", BUS==\"scsi\", PROGRAM==\"/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/\$name\", RESULT==\"`/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/sd$i`\", NAME=\"asm-disk$i\", OWNER=\"grid\", GROUP=\"asmadmin\", MODE=\"0660\"" >> /etc/udev/rules.d/99-oracle-asmdevices.rules > done [root@vrh6 dev]# [root@vrh6 dev]# cat /etc/udev/rules.d/99-oracle-asmdevices.rules KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB09cadb31-cfbea255", NAME="asm-diskb", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB5f097069-59efb82f", NAME="asm-diskc", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB4e1a81c0-20478bc4", NAME="asm-diskd", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VBdcce9285-b13c5a27", NAME="asm-diske", OWNER="grid", GROUP="asmadmin", MODE="0660" KERNEL=="sd*", BUS=="scsi", PROGRAM=="/sbin/scsi_id --whitelisted --replace-whitespace --device=/dev/$name", RESULT=="1ATA_VBOX_HARDDISK_VB82effe1a-dbca7dff", NAME="asm-diskf", OWNER="grid", GROUP="asmadmin", MODE="0660" [root@vrh6 dev]# [root@vrh6 dev]# /sbin/start_udev Starting udev: [ OK ] [root@vrh6 dev]# ls -l asm* brw-rw----. 1 grid asmadmin 8, 16 Jun 30 09:34 asm-diskb brw-rw----. 1 grid asmadmin 8, 32 Jun 30 09:34 asm-diskc brw-rw----. 1 grid asmadmin 8, 48 Jun 30 09:34 asm-diskd brw-rw----. 1 grid asmadmin 8, 64 Jun 30 09:34 asm-diske brw-rw----. 1 grid asmadmin 8, 80 Jun 30 09:34 asm-diskf

  Read the article

• Set up linux box for secure local hosting a-z

  - by microchasm

  I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms Virtualhosts In the rssh section above I added a user to use for SFTP. In this users' home directory, I created a folder called 'https'. This is where the documents for this site will live, so I need to add a virtualhost that will point to it. I will use the above virtual interface for this site (herein called dev.site.local). vi /etc/http/conf/httpd.conf Add the following to the end of httpd.conf: <VirtualHost 192.168.1.3:80> ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> I put a dummy index.html file in the https directory just to check everything out. I tried browsing to it, and was met with permission denied errors. The logs only gave an obscure reference to what was going on: [Mon May 17 14:57:11 2010] [error] [client 192.168.1.100] (13)Permission denied: access to /index.html denied I tried chmod 777 et. al., but to no avail. Turns out, I needed to chmod+x the https directory and its' parent directories. chmod +x /home chmod +x /home/dev chmod +x /home/dev/https This solved that problem. DNS I'm handling DNS via our local Windows Server 2003 box. However, the CentOS documentation for BIND can be found here: http://www.centos.org/docs/5/html/Deployment_Guide-en-US/ch-bind.html SSL To get SSL working, I changed the following in httpd.conf: NameVirtualHost 192.168.1.3:443 #make sure this line is in httpd.conf <VirtualHost 192.168.1.3:443> #change port to 443 ServerAdmin [email protected] DocumentRoot /home/dev/https ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Unfortunately, I keep getting (Error code: ssl_error_rx_record_too_long) errors when trying to access a page with SSL. As JamesHannah gracefully pointed out below, I had not set up the locations of the certs in httpd.conf, and thusly was getting the page thrown at the broswer as the cert making the browser balk. So first, I needed to set up a CA and make certificate files. I found a great (if old) walkthrough on the process here: http://www.debian-administration.org/articles/284. Here are the relevant steps I took from that article: mkdir /home/CA cd /home/CA/ mkdir newcerts private echo '01' > serial touch index.txt #this and the above command are for the database that will keep track of certs Create an openssl.cnf file in the /home/CA/ dir and edit it per the walkthrough linked above. (For reference, my finished openssl.cnf file looked like this: http://pastebin.com/raw.php?i=hnZDij4T) openssl req -new -x509 -extensions v3_ca -keyout private/cakey.pem -out cacert.pem -days 3650 -config ./openssl.cnf #this creates the cacert.pem which gets distributed and imported to the browser(s) Modified openssl.cnf again per walkthrough instructions. openssl req -new -nodes -out dev.req.pem -config ./openssl.cnf #generates certificate request, and key.pem which I renamed dev.key.pem. Modified openssl.cnf again per walkthrough instructions. openssl ca -out dev.cert.pem -config ./openssl.cnf -infiles dev.req.pem #create and sign certificate. cp dev.cert.pem /home/dev/certs/cert.pem cp dev.key.pem /home/certs/key.pem I updated httpd.conf to reflect the certs and turn SSLEngine on: NameVirtualHost 192.168.1.3:443 <VirtualHost 192.168.1.3:443> ServerAdmin [email protected] DocumentRoot /home/dev/https SSLEngine on SSLCertificateFile /home/dev/certs/cert.pem SSLCertificateKeyFile /home/dev/certs/key.pem ServerName dev.site.local ErrorLog /home/dev/logs/error_log TransferLog /home/dev/logs/access_log </VirtualHost> Put the CA cert.pem in a web-accessible place, and downloaded/imported it into my browser. Now I can visit https://dev.site.local with no errors or warnings. And this is where I'm at. I will keep editing this as I make progress. Any tips on how to configure SSL email would be appreciated.

  Read the article

• restart of web dev server every time load ASP.NET MVC application

  - by kjm

  Hi, I continously get this problem (stack trace below) when I start my ASP.NET MVC application and have to restart the web dev server and then it goes away. It appears to be happening on when I make modification in my jquery and then try to restart the application. protected void Application_Start() { InitialiseIocContainer(); RegisterViewEngine(ViewEngines.Engines); RegisterRoutes(RouteTable.Routes); SetupLogging(); } It appears to get caugth on the Application_start in global.asax. I've done lots of search in google but no luck. ITS DRIVING ME BONKERS!!!! can anyone help please Server Error in '/' Application. -------------------------------------------------------------------------------- Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401) Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.IO.FileLoadException: Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401) Source Error: Line 30: RegisterRoutes(RouteTable.Routes); Line 31: SetupLogging(); Line 32: } Line 33: Line 34: private void SetupLogging() Source File: C:\UserData\SourceControl\LLNP4\Trunk\Web\Global.asax.cs Line: 32 Stack Trace: [FileLoadException: Loading this assembly would produce a different grant set from other instances. (Exception from HRESULT: 0x80131401)] LLNP4.MvcApplication.Application_Start() in C:\UserData\SourceControl\LLNP4\Trunk\Web\Global.asax.cs:32

  Read the article

• production vs dev server content-disposition filename encoding

  - by rgripper

  I am using asp.net mvc3, download file in the same browser (Chrome 22). Here is the controller code: [HttpPost] public ActionResult Uploadfile(HttpPostedFileBase file)//HttpPostedFileBase file, string excelSumInfoId) { ... return File( result.Output, "application/vnd.ms-excel", String.Format("{0}_{1:yyyy.MM.dd-HH.mm.ss}.xls", "????????????", DateTime.Now)); } On my dev machine I download a programmatically created file with the correct name "????????????_2012.10.18-13.36.06.xls". Response: Content-Disposition:attachment; filename*=UTF-8''%D0%A1%D1%83%D0%BC%D0%BC%D0%B8%D1%80%D0%BE%D0%B2%D0%B0%D0%BD%D0%B8%D0%B5_2012.10.18-13.36.06.xls Content-Length:203776 Content-Type:application/vnd.ms-excel Date:Thu, 18 Oct 2012 09:36:06 GMT Server:ASP.NET Development Server/10.0.0.0 X-AspNet-Version:4.0.30319 X-AspNetMvc-Version:3.0 And from production server I download a file with the name of the controller's action + correct extension "Uploadfile.xls", which is wrong. Response: Content-Disposition:attachment; filename="=?utf-8?B?0KHRg9C80LzQuNGA0L7QstCw0L3QuNC1XzIwMTIuMTAuMTgtMTMuMzYu?=%0d%0a =?utf-8?B?NTUueGxz?=" Content-Length:203776 Content-Type:application/vnd.ms-excel Date:Thu, 18 Oct 2012 09:36:55 GMT Server:Microsoft-IIS/7.5 X-AspNet-Version:4.0.30319 X-AspNetMvc-Version:3.0 X-Powered-By:ASP.NET Web.config files are the same on both machines. Why does filename gets encoded differently for the same browser? Are there any kinds of default settings in web.config that are different on machines that I am missing?

  Read the article

• tips for fixing bad coding/dev habits ?

  - by dfafa

  i want to become a better coder....so i have decided to sign up for computing science program...maybe a formal education can assist me. i started working on smaller projects to learn but currently i have really bad coding/dev habits which is hindering my productivity as the codebase increases.... i have highlighted them and perhaps someone could make suggestions (or redirect to resources) or a more efficient method. most stuff that i made in the past were web apps. i usually develop with putty + nano...i just love the minimalist feel i use winscp and develop directly on my private web server...too lazy to do it on localhost and upload it later. i dont use subversion control...which one do i need ? sometimes ctrl +z doesn't work well. when i run out of ideas for naming variable, i use swear words instead. i swear a lot when i get stuck....how to deal with anger issue ? my codes look ugly with comments everywhere. would rather use procedural coding finds "thinking" in OO difficult and time consuming i "write first think later". refactors code only if i am getting paid for it. dislikes configuring linux distro, Apache, MySQL, scaling, designing graphics and layouts. does not like writing tests likes working alone. does not like sharing codes. has an econ degree dislikes reading other people's code would rather write it on my own it seems my only true desire is to translate my ideas to a working prototype as fast as possible....it seems like i am very uninterested in the other details...could it be that i am not cut out to be a coder after all ? is going back to study comp sci a bad idea ?

  Read the article

• Dev-C++ and Detours compiling error

  - by Julio

  Hello. As title says I'm trying to compile with Dev-C++ a simple DLL using Detours, but I get this error: syntax error before token '&' on this lines: DetourAttach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourDetach(&(PVOID &)trueMessageBox, hookedMessageBox) The complete code is #include <windows.h> #include <detours.h> #pragma comment( lib, "Ws2_32.lib" ) #pragma comment( lib, "detours.lib" ) #pragma comment( lib, "detoured.lib" ) int (WINAPI * trueMessageBox)(HWND hWnd, LPCSTR lpText, LPCSTR lpCaption, UINT uType) = MessageBox; int WINAPI hookedMessageBox(HWND hWnd, LPCSTR lpText, LPCSTR lpCaption, UINT uType) { LPCSTR lpNewCaption = "You've been hijacked"; int iReturn = trueMessageBox(hWnd, lpText, lpNewCaption, uType); return iReturn; } BOOL WINAPI DllMain( HINSTANCE, DWORD dwReason, LPVOID ) { switch ( dwReason ) { case DLL_PROCESS_ATTACH: DetourTransactionBegin(); DetourUpdateThread( GetCurrentThread() ); DetourAttach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourTransactionCommit(); break; case DLL_PROCESS_DETACH: DetourTransactionBegin(); DetourUpdateThread( GetCurrentThread() ); DetourDetach(&(PVOID &)trueMessageBox, hookedMessageBox) DetourTransactionCommit(); break; } return TRUE; }

  Read the article

• rabbitmq-erlang-client, using rebar friendly pkg, works on dev env fails on rebar release

  - by lfurrea

  I am successfully using the rebar-friendly package of rabbitmq-erlang-client for a simple Hello World rebarized and OTP "compliant" app and things work fine on the dev environment. I am able to fire up an erl console and do my application:start(helloworld). and connect to the broker, open up a channel and communicate to queues. However, then I proceed to do rebar generate and it builds up the release just fine, but when I try to fire up from the self contained release package then things suddenly explode. I know rebar releases are known to be an obscure art, but I would like to know what are my options as far as deployment for an app using the rabbitmq-erlang-client. Below you will find the output of the console on the crash: =INFO REPORT==== 18-Dec-2012::16:41:35 === application: session_record exited: {{{badmatch, {error, {'EXIT', {undef, [{amqp_connection_sup,start_link, [{amqp_params_network,<<"guest">>,<<"guest">>,<<"/">>, "127.0.0.1",5672,0,0,0,infinity,none, [#Fun<amqp_auth_mechanisms.plain.3>, #Fun<amqp_auth_mechanisms.amqplain.3>], [],[]}], []}, {supervisor2,do_start_child_i,3, [{file,"src/supervisor2.erl"},{line,391}]}, {supervisor2,handle_call,3, [{file,"src/supervisor2.erl"},{line,413}]}, {gen_server,handle_msg,5, [{file,"gen_server.erl"},{line,588}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}}}}, [{amqp_connection,start,1, [{file,"src/amqp_connection.erl"},{line,164}]}, {hello_qp,start_link,0,[{file,"src/hello_qp.erl"},{line,10}]}, {session_record_sup,init,1, [{file,"src/session_record_sup.erl"},{line,55}]}, {supervisor_bridge,init,1, [{file,"supervisor_bridge.erl"},{line,79}]}, {gen_server,init_it,6,[{file,"gen_server.erl"},{line,304}]}, {proc_lib,init_p_do_apply,3, [{file,"proc_lib.erl"},{line,227}]}]}, {session_record_app,start,[normal,[]]}} type: permanent

  Read the article

• Building a J2EE dev/test setup on a single PC

  - by John

  It's been a while since I did Java work, and even then I was never responsible for starting a large project from the very start... there were test/staging/production systems already running, etc, etc. Now I am looking to start a J2EE project from scratch on my trusty workstation, which has never been used for Java development and runs Windows 7 64bit. First of all, I'll be getting Eclipse. As far as writing the code goes I'm pretty happy. And running it through Eclipse is OK, but what I'd really want is to have a VM running MySQL and TomCat on which I can properly deploy my project and run/debug it 'remotely' from my dev PC. And I guess this should be done using Ant instead of letting Eclipse build the WAR for me, so that I don't end up with a dependence on Eclipse. I'm certain Eclipse can do this, so you hit a button and it runs Ant scripts, deploys and debugs for instance, but very hazy on it. Are there any good guides on this? I don't want to be taught Java, or even Ant, but rather the 'glue' parts like getting my test VM up and running under Windows, getting a build/test/deploy/run pipeline running through Eclipse, etc. One point, I only plan to use Windows... hosting a Windows VM on my Windwos desktop. And while I can use command-line tools like ant/svn, I'm much more a GUI person who loves IDE integration... I'd rather this didn't end up an argument about Linux or Vi, etc! I am looking for free, but am a MAPS subscriber, and run Win7 Ultimate in case that makes a difference as far as free VM solutions.

  Read the article

• xen 4.1 host priodically dropping network packets of domU

  - by Dyutiman Chakraborty

  I have xen 4.1 Host running on a ubuntu 12.04 LTS Server with ip 153.x.x.54. I have setup 2 VMs on it, namely, "dev.mydomain.com" and "web.mydomain.com" with ips 195.X.X.2 and 195.x.x.3 respectively. For network the VMs connect through xendbr0 (xen-bridge), and can accces the network properly. I can also login to the VMs with ssh with no issue. However when I ping any of the VMs, there is a high amount of periodic packet drop. If I the ping the xen host (dom0) there is no packet drop. Following is a output of "tcpdump | grep ICMP" on dOM0 while I was pinging one of the domU tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 05:19:55.682493 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 30, length 64 05:19:56.691144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 31, length 64 05:19:57.698776 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 32, length 64 05:19:58.706784 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 33, length 64 05:19:59.714751 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 34, length 64 05:20:00.723144 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 35, length 64 05:20:01.730349 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 36, length 64 05:20:02.739017 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 37, length 64 05:20:03.746806 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 38, length 64 05:20:06.770326 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 41, length 64 05:20:07.778801 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 42, length 64 05:20:08.786481 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 43, length 64 05:20:09.794720 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 44, length 64 05:20:10.802395 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 45, length 64 05:20:11.810770 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 46, length 64 05:20:12.818511 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 47, length 64 05:20:13.826817 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 48, length 64 05:20:14.835125 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 49, length 64 05:20:15.842138 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3460, seq 50, length 64 05:20:18.274072 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 1, length 64 05:20:19.282347 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 2, length 64 05:20:20.290746 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 3, length 64 05:20:21.297910 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 4, length 64 05:20:22.305656 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 5, length 64 05:20:23.314369 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 6, length 64 05:20:24.322055 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 7, length 64 05:20:25.329782 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 8, length 64 05:20:26.338473 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 9, length 64 05:20:27.346411 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 10, length 64 05:20:28.354175 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 11, length 64 05:20:29.361640 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 12, length 64 05:20:30.370026 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 13, length 64 05:20:31.377696 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 14, length 64 05:20:32.386151 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 15, length 64 05:20:33.394118 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 16, length 64 05:20:34.402058 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 17, length 64 05:20:35.409002 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 18, length 64 05:20:36.417692 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > web.mydomain.com: ICMP echo request, id 3461, seq 19, length 64 05:20:36.496916 IP6 fe80::3285:a9ff:feec:fc69 > ip6-allnodes: HBH ICMP6, multicast listener querymax resp delay: 1000 addr: ::, length 24 05:20:36.499112 IP6 fe80::21c:c0ff:fe6c:c091 > ff02::1:ff6c:c091: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff6c:c091, length 24 05:20:36.507041 IP6 fe80::227:eff:fe11:fa3f > ff02::1:ff00:2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:2, length 24 05:20:36.523919 IP6 fe80::21c:c0ff:fe77:6257 > ff02::1:ff77:6257: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:6257, length 24 05:20:36.544785 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff12:ea9a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff12:ea9a, length 24 05:20:36.581740 IP6 fe80::5604:a6ff:fef1:6da7 > ff02::1:fff1:6da7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:fff1:6da7, length 24 05:20:36.600103 IP6 fe80::8a8:8aa0:5e18:917a > ff02::1:ff18:917a: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff18:917a, length 24 05:20:36.601989 IP6 fe80::227:eff:fe11:fa3e > ff02::1:ff11:fa3e: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff11:fa3e, length 24 05:20:36.611090 IP6 fe80::dcad:56ff:fe57:3bbe > ff02::1:ff57:3bbe: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff57:3bbe, length 24 05:20:36.660521 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff00:6: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:6, length 24 05:20:36.698871 IP6 fe80::21e:8cff:feb4:9f89 > ff02::1:ffb4:9f89: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ffb4:9f89, length 24 05:20:36.776548 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff01:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:7, length 24 05:20:36.781910 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff00:3: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:3, length 24 05:20:36.865475 IP6 fe80::21c:c0ff:fe4a:ae9f > ff02::1:ff4a:ae9f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff4a:ae9f, length 24 05:20:36.908333 IP6 fe80::dcad:45ff:fe90:84db > ff02::1:ff90:84db: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff90:84db, length 24 05:20:36.919653 IP6 fe80::54:ff:fe12:ea9a > ff02::1:ff00:7: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff00:7, length 24 05:20:36.924276 IP6 fe80::59a2:2a4a:2082:6dee > ff02::1:ff82:6dee: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff82:6dee, length 24 05:20:37.001905 IP6 fe80::54:ff:fe8f:6dd > ff02::1:ff8f:6dd: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff8f:6dd, length 24 05:20:37.042403 IP6 fe80::54:ff:fe95:54f2 > ff02::1:ff95:54f2: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff95:54f2, length 24 05:20:37.090992 IP6 fe80::21c:c0ff:fe77:62ac > ff02::1:ff77:62ac: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff77:62ac, length 24 05:20:37.098118 IP6 fe80::d63d:7eff:fe01:b67f > ff02::1:ff01:b67f: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff01:b67f, length 24 05:20:37.118784 IP6 fe80::54:ff:fe12:ea9a > ff02::202: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::202, length 24 05:20:37.168548 IP6 fe80::54:ff:fe02:1d31 > ff02::1:ff02:1d31: HBH ICMP6, multicast listener reportmax resp delay: 0 addr: ff02::1:ff02:1d31, length 24 05:20:41.743286 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 1, length 64 05:20:41.743542 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 1, length 64 05:20:42.743859 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 2, length 64 05:20:42.743952 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 2, length 64 05:20:43.745689 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 3, length 64 05:20:43.745777 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 3, length 64 05:20:44.746706 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 4, length 64 05:20:44.746796 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 4, length 64 05:20:45.747986 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 5, length 64 05:20:45.748082 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 5, length 64 05:20:46.749834 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 6, length 64 05:20:46.749920 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 6, length 64 05:20:47.750838 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 7, length 64 05:20:47.751182 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 7, length 64 05:20:48.751909 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 8, length 64 05:20:48.751991 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 8, length 64 05:20:49.752542 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 9, length 64 05:20:49.752620 IP dev.mydomain.com > ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in: ICMP echo reply, id 3463, seq 9, length 64 05:20:50.754246 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 10, length 64 05:20:51.753856 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 11, length 64 05:20:52.752868 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 12, length 64 05:20:53.754174 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 13, length 64 05:20:54.753972 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 14, length 64 05:20:55.753814 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 15, length 64 05:20:56.753391 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 16, length 64 05:20:57.753683 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 17, length 64 05:20:58.753487 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 18, length 64 05:20:59.754013 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 19, length 64 05:21:00.753169 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 20, length 64 05:21:01.753757 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 21, length 64 05:21:02.753307 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 22, length 64 05:21:03.753021 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 23, length 64 05:21:04.753628 IP ABTS-North-Dynamic-226.X.X.122.airtelbroadband.in > dev.mydomain.com: ICMP echo request, id 3463, seq 24, length 64 ^C479 packets captured 718 packets received by filter 238 packets dropped by kernel 3 packets dropped by interface You see the ping request is not responed to initially, then for a moment it is replied back and then again no reply. I have tried everything (to the best of my knowledge) to fix this, but can't find any answer Any help will be greatly appreciated Thanks.

  Read the article

• I receive the error 'grub-install /dev/sda failed' while attempting to install Ubuntu as the computer's only OS.

  - by Liath

  I am attempting to install Ubuntu on a box which was previously running Windows 7. I have also experienced the dreaded "Unable to install GRUB" error. I am not attempting to dual boot. I have previously run a Windows boot disk and removed all existing partitions. If I run the Ubuntu 12.04 install CD and click install after the config screens, I get the error Executing 'grub-install /dev/sda' failed. This is a fatal error. (It is the same error as this question: Unable to install GRUB) All the questions I've read while looking for a solution are related to dual boot. I'm not interested in dual boot, I'm after a clean out the box Ubuntu install. How can I achieve this? (For my sanity, please use very simple instructions when responding. I don't claim to have any talent either for linux or as a sysadmin) Additional details copied from comments dated: 2012-05-29 ~15:19Z After booting from the CD, clicking Try Ubuntu, and then sudo fdisk /dev/sda I get fdisk: unable to seek on /dev/sda: Invalid argument sudo fdisk /dev/sdb gives Device contains neither a valid DOS partiion table, nor Sun, SGI or OSF disklabel. Building a new DOS disklabel with disk identifier 0x15228d1d. Changes will remain in memory only until you decide to write them. After that of course, the previous content won't be recoverable. Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite). Command (m for help): I should add the Live CD desktop is graphically bad. I've got missing parts of programs and the terminal occasionally reflects to the bottom of the screen. But I can't imagine this is related.

  Read the article

• NVidia ION and /dev/mapper/nvidia_... issues.

  - by Ritsaert Hornstra

  I have an NVidia ION board with 4 SATA ports and want to use that to run a Linux Server (CentOS 5.4). I first hooed up 3 HDs (that will be a RAID5 array) and a forth small boot HD. I first started to use the onboard RAID capability but that does not work correctly under Linux: the raid capacity is not a real RAID but uses lvm to define some arays. After setting the BIOS back to normal SATA mode and whiping the HDs, the first boot harddisk (/dev/sda) is seen as /dev/sda BEFORE mounting and after mounting as /dev/mapper/nvidia_. CentOS is unable to install on it (and grub is not installable on it either). So somehow the harddisk is still seen as if it belongs to some lvm volume. I tried to clean out the HD by issuing a few dd if=/dev/zero of=/dev/sda commands to wipe the starting cylinders and final cylinders but to no avail. Did anyone see this problem and did anyone find a solution? UPDATE When I create only a single ext3 partition on the first HD (/dev/mapper/nvidia_...) no LVM partitions are seen and I can boot from /dev/mapper/nvidia_.... Now the next step is to see how I can get rid of this folly.

  Read the article

• Linux Software RAID1: How to boot after (physically) removing /dev/sda? (LVM, mdadm, Grub2)

  - by flight

  A server set up with Debian 6.0/squeeze. During the squeeze installation, I configured the two 500GB SATA disks (/dev/sda and /dev/sdb) as a RAID1 (managed with mdadm). The RAID keeps a 500 GB LVM volume group (vg0). In the volume group, there's a single logical volume (lv0). vg0-lv0 is formatted with extfs3 and mounted as root partition (no dedicated /boot partition). The system boots using GRUB2. In normal use, the systems boots fine. Also, when I tried and removed the second SATA drive (/dev/sdb) after a shutdown, the system came up without problem, and after reconnecting the drive, I was able to --re-add /dev/sdb1 to the RAID array. But: After removing the first SATA drive (/dev/sda), the system won't boot any more! A GRUB welcome message shows up for a second, then the system reboots. I tried to install GRUB2 manually on /dev/sdb ("grub-install /dev/sdb"), but that doesn't help. Appearently squeeze fails to set up GRUB2 to launch from the second disk when the first disk is removed, which seems to be quite an essential feature when running this kind of Software RAID1, isn't it? At the moment, I'm lost whether this is a problem with GRUB2, with LVM or with the RAID setup. Any hints?

  Read the article

• Forms Authentication works on dev server but not production server (same SQL db)

  - by Desmond

  Hi, I have the same problem as a previously solved question however, this solution did not help me. I have posted the previous question and answer below: http://stackoverflow.com/questions/2215963/forms-authentication-works-on-dev-server-but-not-production-server-same-sql-db/2963985#2963985 Question: I've never had this problem before, I'm at a total loss. I have a SQL Server 2008 database with ASP.NET Forms Authentication, profiles and roles created and is functional on the development workstation. I can login using the created users without problem. I back up the database on the development computer and restore it on the production server. I xcopy the DLLs and ASP.NET files to the server. I make the necessary changes in the web.config, changing the SQL connection strings to point to the production server database and upload it. I've made sure to generate a machine key and it is the same on both the development web.config and the production web.config. And yet, when I try to login on the production server, the same user that I'm able to login successfully with on the development computer, fails on the production server. There is other content in the database, the schema generated by FluentNHibernate. This content is able to be queried successfully on both development and production servers. This is mind boggling, I believe I've verified everything, but obviously it is still not working and I must have missed something. Please, any ideas? Answer: I ran into a problem with similar symptoms at one point by forgetting to set the applicationName attribute in the web.config under the membership providers element. Users are associated to a specific application. Since I didn't set the applicationName, it defaulted to the application path (something like "/MyApplication"). When it was moved to production, the path changed (for example to "/WebSiteFolder/SomeSubFolder /MyApplication"), so the application name defaulted to the new production path and an association could not be made to the original user accounts that were set up in development. Could your issues possibly be the same as mine? I have this already in my web.config but still get the issue. Any ideas? <membership> <providers> <clear/> <add name="AspNetSqlMembershipProvider" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" enablePasswordRetrieval="false" enablePasswordReset="true" requiresQuestionAndAnswer="false" requiresUniqueEmail="false" passwordFormat="Hashed" maxInvalidPasswordAttempts="5" minRequiredPasswordLength="6" minRequiredNonalphanumericCharacters="0" passwordAttemptWindow="10" passwordStrengthRegularExpression="" applicationName="/"/> </providers> </membership> <profile> <providers> <clear/> <add name="AspNetSqlProfileProvider" type="System.Web.Profile.SqlProfileProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" connectionStringName="ApplicationServices" applicationName="/"/> </providers> </profile> <roleManager enabled="false"> <providers> <clear/> <add connectionStringName="ApplicationServices" applicationName="/" name="AspNetSqlRoleProvider" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> <add applicationName="/" name="AspNetWindowsTokenRoleProvider" type="System.Web.Security.WindowsTokenRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a"/> </providers> </roleManager> Any help is greatly appriciated.

  Read the article

• Specific DNS sometimes resolves to wildcard, incorrectly

  - by Mojo

  I have an intermittent problem, and I'm not sure where to start trying to troubleshoot it. In our dev environment, we have two visible IP addresses on load balancers, one to the front-end, and one to a number of back-end service machines. The front-end is configured to take a wildcard DNS name to support generic "portals." dev.example.com A 10.1.1.1 *.dev.example.com CNAME dev.example.com The back-end servers are all specific names within the same space: core.dev.example.com A 10.1.1.2 cms.dev.example.com CNAME core.dev.example.com search.dev.example.com CNAME core.dev.example.com Here's the problem. Periodically a developer or a program trying to reach, say, cms.dev.example.com will get a result that points to the front-end, instead of the back-end load balancer: cms.dev.example.com is an alias to core.dev.example.com core.dev.example.com is an alias to dev.example.com (WRONG!) dev.example.com 10.1.1.1 The developers are all on Mac OS X machines, though I've seen the problem occur on an Ubuntu machine as well, using a local cloud host DNS resolver. Sometimes the developer is using a VPN, which directs the DNS to its own resolver, and sometimes he's on the local net using a DNS resolver assigned by the NAT router. Sometimes clearing the Mac OS X DNS cache, logging into the VPN, then logging out of the VPN, will make the problem go away. The origin authoritative server is on zerigo, and a dig directly to their name servers always seems to give the correct answer. The published DNS cache time for these records is 15 minutes, but the problem has been intermittent for about a week. Any troubleshooting suggestions?

  Read the article

• Why is the latency on one LVM volume consistently higher?

  - by David Schmitt

  I've got a server with LVM over RAID1. One of the volumes has a consistently higher IO latency (as measured by the diskstats_latency munin plugin) than the other volumes from the same group. As you can see, the dark orange /root volume has consistently high IO latency. Actually ten times the average latency of the physical devices. It also has the highest Min and Max values. My main concern are not the peaks, which occur under high load, but the constant load on (semi-)idle. The server is running Debian Squeeze with the VServer kernel and has four VServer containers and one KVM guest. I'm looking for ways to fix - or at least understand - this situation. Here're some parts of the system configuration: root@kvmhost2:~# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/system--host-root 19G 3.8G 14G 22% / tmpfs 16G 0 16G 0% /lib/init/rw udev 16G 224K 16G 1% /dev tmpfs 16G 0 16G 0% /dev/shm /dev/md0 942M 37M 858M 5% /boot /dev/mapper/system--host-isos 28G 19G 8.1G 70% /srv/isos /dev/mapper/system--host-vs_a 30G 23G 6.0G 79% /var/lib/vservers/a /dev/mapper/system--host-vs_b 5.0G 594M 4.1G 13% /var/lib/vservers/b /dev/mapper/system--host-vs_c 5.0G 555M 4.2G 12% /var/lib/vservers/c /dev/loop0 4.4G 4.4G 0 100% /media/debian-6.0.0-amd64-DVD-1 /dev/loop1 4.4G 4.4G 0 100% /media/debian-6.0.0-i386-DVD-1 /dev/mapper/system--host-vs_d 74G 55G 16G 78% /var/lib/vservers/d root@kvmhost2:~# cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 none /dev devtmpfs rw,relatime,size=16500836k,nr_inodes=4125209,mode=755 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 /dev/mapper/system--host-root / ext3 rw,relatime,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0 /dev/md0 /boot ext3 rw,sync,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-isos /srv/isos ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_a /var/lib/vservers/a ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_b /var/lib/vservers/b ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/mapper/system--host-vs_c /var/lib/vservers/c ext3 rw,relatime,errors=continue,data=ordered 0 0 /dev/loop0 /media/debian-6.0.0-amd64-DVD-1 iso9660 ro,relatime 0 0 /dev/loop1 /media/debian-6.0.0-i386-DVD-1 iso9660 ro,relatime 0 0 /dev/mapper/system--host-vs_d /var/lib/vservers/d ext3 rw,relatime,errors=continue,data=ordered 0 0 root@kvmhost2:~# cat /proc/mdstat Personalities : [raid1] md1 : active raid1 sda2[0] sdb2[1] 975779968 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdb1[1] 979840 blocks [2/2] [UU] unused devices: <none> root@kvmhost2:~# iostat -x Linux 2.6.32-5-vserver-amd64 (kvmhost2) 06/28/2012 _x86_64_ (8 CPU) avg-cpu: %user %nice %system %iowait %steal %idle 3.09 0.14 2.92 1.51 0.00 92.35 Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 23.25 161.12 7.46 37.90 855.27 1596.62 54.05 0.13 2.80 1.76 8.00 sdb 22.82 161.36 7.36 37.66 850.29 1596.62 54.35 0.54 12.01 1.80 8.09 md0 0.00 0.00 0.00 0.00 0.14 0.02 38.44 0.00 0.00 0.00 0.00 md1 0.00 0.00 53.55 198.16 768.01 1585.25 9.35 0.00 0.00 0.00 0.00 dm-0 0.00 0.00 0.48 20.21 16.70 161.71 8.62 0.26 12.72 0.77 1.60 dm-1 0.00 0.00 3.62 10.03 28.94 80.21 8.00 0.19 13.68 1.59 2.17 dm-2 0.00 0.00 0.00 0.00 0.00 0.00 9.17 0.00 9.64 6.42 0.00 dm-3 0.00 0.00 6.73 0.41 53.87 3.28 8.00 0.02 3.44 0.12 0.09 dm-4 0.00 0.00 17.45 18.18 139.57 145.47 8.00 0.42 11.81 0.76 2.69 dm-5 0.00 0.00 2.50 46.38 120.50 371.07 10.06 0.69 14.20 0.46 2.26 dm-6 0.00 0.00 0.02 0.10 0.67 0.81 12.53 0.01 75.53 18.58 0.22 dm-7 0.00 0.00 0.00 0.00 0.00 0.00 7.99 0.00 11.24 9.45 0.00 dm-8 0.00 0.00 22.69 102.76 407.25 822.09 9.80 0.97 7.71 0.39 4.95 dm-9 0.00 0.00 0.06 0.08 0.50 0.62 8.00 0.07 481.23 11.72 0.16 root@kvmhost2:~# ls -l /dev/mapper/ total 0 crw------- 1 root root 10, 59 May 11 11:19 control lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm1 -> ../dm-4 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm2 -> ../dm-3 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-isos -> ../dm-2 lrwxrwxrwx 1 root root 7 May 11 11:19 system--host-root -> ../dm-0 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-swap -> ../dm-9 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_d -> ../dm-8 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_b -> ../dm-6 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_c -> ../dm-7 lrwxrwxrwx 1 root root 7 Jun 5 15:06 system--host-vs_a -> ../dm-5 lrwxrwxrwx 1 root root 7 Jun 5 15:08 system--host-kvm3 -> ../dm-1 root@kvmhost2:~#

  Read the article

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• 404 when doing safe-upgrade in lucid 64 box?

  - by Millisami

  Why I see 404 when doing sudo aptitude safe-upgrade in my lucid 64 box? deploy@li167-251:~$ sudo aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: apache2 apache2-mpm-prefork apache2-threaded-dev apache2-utils apache2.2-bin apache2.2-common apt apt-utils base-files binutils bzip2 dpkg dpkg-dev gzip ifupdown krb5-multidev language-pack-en language-pack-en-base language-selector-common libatk1.0-0 libatk1.0-dev libavahi-client3 libavahi-common-data libavahi-common3 libbz2-1.0 libc-bin libc-dev-bin libc6 libc6-dev libc6-i686 libcups2 libfreetype6 libfreetype6-dev libglib2.0-0 libglib2.0-dev libgssapi-krb5-2 libgssrpc4 libgtk2.0-0 libgtk2.0-common libgtk2.0-dev libk5crypto3 libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev libkrb5support0 libldap-2.4-2 libldap2-dev libmysqlclient-dev libmysqlclient16 libnotify-dev libnotify1 libpam-modules libpam-runtime libpam0g libparted0debian1 libpng12-0 libpng12-dev libpq-dev libpq5 libssl-dev libssl0.9.8 libtiff4 libudev0 libusb-0.1-4 linux-libc-dev mountall mysql-client mysql-client-5.1 mysql-client-core-5.1 mysql-common mysql-server mysql-server-5.1 mysql-server-core-5.1 openssh-client openssh-server openssl parted python-apt sudo tzdata udev upstart ureadahead wget xulrunner-1.9.2 xulrunner-1.9.2-dev The following packages are RECOMMENDED but will NOT be installed: colibri debhelper fakeroot hicolor-icon-theme libatk1.0-data libglib2.0-data libgtk2.0-bin libhtml-template-perl manpages-dev notification-daemon notify-osd ssl-cert xauth xfce4-notifyd 88 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 85.8MB of archives. After unpacking 1712kB will be used. Do you want to continue? [Y/n/?] y Writing extended state information... Done Get:1 http://security.ubuntu.com/ubuntu/ lucid-updates/main libpam-modules 1.1.1-2ubuntu5 [358kB] Get:2 http://security.ubuntu.com/ubuntu/ lucid-updates/main base-files 5.0.0ubuntu20.10.04.2 [70.2kB] Get:3 http://security.ubuntu.com/ubuntu/ lucid-updates/main gzip 1.3.12-9ubuntu1.1 [102kB] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc-bin 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6 2.11.1-0ubuntu7.2 404 Not Found [IP: 91.189.88.37 80] Err http://security.ubuntu.com/ubuntu/ lucid-updates/main libc6-i686 2.11.1-0ubuntu7.2 .........

  Read the article

• Raid 5 with 4 disks on Debian automatically creates a spare drive

  - by Razer

  I'm trying to to create a RAID 5 with 4x 2TB disks on Debian 6. I followed the instructions from: http://zackreed.me/articles/38-software-raid-5-in-debian-with-mdadm I created the raid with following command: sudo mdadm --create --verbose /dev/md0 --auto=yes --level=5 --raid-devices=4 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1 After creating the RAID mdadm --detail /dev/md0 shows me: /dev/md0: Version : 1.2 Creation Time : Mon Jun 11 18:14:26 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 11 18:14:26 2012 State : clean, degraded Active Devices : 3 Working Devices : 4 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : rsserver:0 (local to host rsserver) UUID : a68c3c99:1ef865e9:5a8a7bdc:64710ed8 Events : 0 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 8 33 1 active sync /dev/sdc1 2 8 49 2 active sync /dev/sdd1 3 0 0 3 removed 4 8 65 - spare /dev/sde1 Why is there a spare drive? I didn't create one. I don't want to use a spare drive.

  Read the article

• Informaton of pendriver with libudv on linux

  - by Catanzaro

  I'm doing a little app in C that read the driver information of my pendrive: Plugged it and typed dmesg: [ 7676.243994] scsi 7:0:0:0: Direct-Access Lexar USB Flash Drive 1100 PQ: 0 ANSI: 0 CCS [ 7676.248359] sd 7:0:0:0: Attached scsi generic sg2 type 0 [ 7676.256733] sd 7:0:0:0: [sdb] 7831552 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 7676.266559] sd 7:0:0:0: [sdb] Write Protect is off [ 7676.266566] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 7676.266569] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285373] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.285383] sdb: sdb1 [ 7676.298661] sd 7:0:0:0: [sdb] Assuming drive cache: write through [ 7676.298667] sd 7:0:0:0: [sdb] Attached SCSI removable disk with "udevadm info -q all -n /dev/sdb" P: /devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb N: sdb W: 36 S: block/8:16 S: disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 S: disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: UDEV_LOG=3 E: DEVPATH=/devices/pci0000:00/0000:00:11.0/0000:02:03.0/usb1/1-1/1-1:1.0/host7/target7:0:0/7:0:0:0/block/sdb E: MAJOR=8 E: MINOR=16 E: DEVNAME=/dev/sdb E: DEVTYPE=disk E: SUBSYSTEM=block E: ID_VENDOR=Lexar E: ID_VENDOR_ENC=Lexar\x20\x20\x20 E: ID_VENDOR_ID=05dc E: ID_MODEL=USB_Flash_Drive E: ID_MODEL_ENC=USB\x20Flash\x20Drive\x20 E: ID_MODEL_ID=a813 E: ID_REVISION=1100 E: ID_SERIAL=Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 E: ID_SERIAL_SHORT=AA5OCYQII8PSQXBB E: ID_TYPE=disk E: ID_INSTANCE=0:0 E: ID_BUS=usb E: ID_USB_INTERFACES=:080650: E: ID_USB_INTERFACE_NUM=00 E: ID_USB_DRIVER=usb-storage E: ID_PATH=pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 E: ID_PART_TABLE_TYPE=dos E: UDISKS_PRESENTATION_NOPOLICY=0 E: UDISKS_PARTITION_TABLE=1 E: UDISKS_PARTITION_TABLE_SCHEME=mbr E: UDISKS_PARTITION_TABLE_COUNT=1 E: DEVLINKS=/dev/block/8:16 /dev/disk/by-id/usb-Lexar_USB_Flash_Drive_AA5OCYQII8PSQXBB-0:0 /dev/disk/by-path/pci-0000:02:03.0-usb-0:1:1.0-scsi-0:0:0:0 and my software is: Codice: Seleziona tutto #include <stdio.h> #include <libudev.h> #include <stdlib.h> #include <locale.h> #include <unistd.h> int main(void) { struct udev_enumerate *enumerate; struct udev_list_entry *devices, *dev_list_entry; struct udev_device *dev; /* Create the udev object */ struct udev *udev = udev_new(); if (!udev) { printf("Can't create udev\n"); exit(0); } enumerate = udev_enumerate_new(udev); udev_enumerate_add_match_subsystem(enumerate, "scsi_generic"); udev_enumerate_scan_devices(enumerate); devices = udev_enumerate_get_list_entry(enumerate); udev_list_entry_foreach(dev_list_entry, devices) { const char *path; /* Get the filename of the /sys entry for the device and create a udev_device object (dev) representing it */ path = udev_list_entry_get_name(dev_list_entry); dev = udev_device_new_from_syspath(udev, path); /* usb_device_get_devnode() returns the path to the device node itself in /dev. */ printf("Device Node Path: %s\n", udev_device_get_devnode(dev)); /* The device pointed to by dev contains information about the hidraw device. In order to get information about the USB device, get the parent device with the subsystem/devtype pair of "usb"/"usb_device". This will be several levels up the tree, but the function will find it.*/ dev = udev_device_get_parent_with_subsystem_devtype( dev, "block", "disk"); if (!dev) { printf("Errore\n"); exit(1); } /* From here, we can call get_sysattr_value() for each file in the device's /sys entry. The strings passed into these functions (idProduct, idVendor, serial, etc.) correspond directly to the files in the directory which represents the USB device. Note that USB strings are Unicode, UCS2 encoded, but the strings returned from udev_device_get_sysattr_value() are UTF-8 encoded. */ printf(" VID/PID: %s %s\n", udev_device_get_sysattr_value(dev,"idVendor"), udev_device_get_sysattr_value(dev, "idProduct")); printf(" %s\n %s\n", udev_device_get_sysattr_value(dev,"manufacturer"), udev_device_get_sysattr_value(dev,"product")); printf(" serial: %s\n", udev_device_get_sysattr_value(dev, "serial")); udev_device_unref(dev); } /* Free the enumerator object */ udev_enumerate_unref(enumerate); udev_unref(udev); return 0; } the problem is that i obtain in output: Device Node Path: /dev/sg0 Errore and dont view information. subsystem and the devtype i think that are inserted well : "block" and "disk". thanks for help. Bye

  Read the article

• Can IE Developer Tools be configured to 'see' a window that is less than full screen in size?

  - by user2795930

  I have used Developer Tools for IE for over 2 years, so I have some good experience with the tool. But the window that I need to debug now is less than a full screen in size and cannot be made larger. (Just imagine a large window that is approximately 2/3's of your full screen, but cannot be enlarged so that it is full screen). So when I try to utilize Developer Tools to debug the window, it doesn't work. It is as if Developer Tools tries to look at the full screen which is displayed behind my window that is displayed on the screen. Is there any way to make Developer Tools 'see' a window that is less than full screen in size and sits on top of another screen / web page?

  Read the article

• Is it safe to format this partition?

  - by xanesis4

  On a ubuntu server I own, I am running out of space. When I ran sudo parted /dev/sda -l to find all available drives, I got this: Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 256MB 255MB primary ext2 boot 2 257MB 1000GB 1000GB extended 5 257MB 1000GB 1000GB logical lvm Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/server--vg-swap_1: 2135MB Sector size (logical/physical): 512B/512B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2135MB 2135MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/server--vg-root: 998GB Sector size (logical/physical): 512B/512B Partition Table: loop Number Start End Size File system Flags 1 0.00B 998GB 998GB ext4 I understand /dev/mapper/server--vg-root is the filesystem, and /dev/sda1 has some stuff related to GRUB. But, what about /dev/sda2 and /dev/sda5? When I tried to mount /dev/sda2, it said that I needed to specify the file system, which according to the table, is nonexistent. So, is it safe to format this with, say ext4 and mount it? Also, when I tried to mount /dev/sd5, it gave me this error: mount: unknown filesystem type 'LVM2_member' I assume it is NOT save to reformat this. If I'm wrong, then that would be great, because I could save some space. Please let me know either way. Thanks in advance! UPDATE: Here is the result of mount: /dev/mapper/server--vg-root on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot type ext2 (rw,acl) /dev/sda1 on /media/hd2 type ext2 (rw)

  Read the article

• How to format FAT32 filesystem infected with windows virus and that is write protected

  - by explorex

  Hi, I have a pendrive with FAT32 filesystem. it is infected with virus dont know which but has autorun.inf and create exe file within folder. I tried to format it with various filesystems and even try to delete it with GParted but couldn't because it says it is write protected i can't even delete files. How to format it? user@explorerx:~$ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbd04bd04 Device Boot Start End Blocks Id System /dev/sda1 * 1 498 3998720 82 Linux swap / Solaris Partition 1 does not end on cylinder boundary. /dev/sda2 499 19457 152287585+ f W95 Ext'd (LBA) /dev/sda5 5100 10198 40957686 7 HPFS/NTFS /dev/sda6 10199 14787 36861111 7 HPFS/NTFS /dev/sda7 14788 19457 37511743+ 7 HPFS/NTFS /dev/sda8 499 5099 36956160 83 Linux Partition table entries are not in disk order Disk /dev/sdc: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc13bc13b Device Boot Start End Blocks Id System /dev/sdc1 1 9729 78143488 7 HPFS/NTFS /dev/sdc2 9729 19457 78143488 7 HPFS/NTFS Disk /dev/sdb: 4194 MB, 4194304000 bytes 112 heads, 47 sectors/track, 1556 cylinders Units = cylinders of 5264 * 512 = 2695168 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 2 1557 4091904 b W95 FAT32

  Read the article

• PHP remote development workflow: git, symfony and hudson

  - by user2022

  I'm looking to develop a website and all the work will be done remotely (no local dev server). The reason for this is that my shared hosting company a2hosting has a specific configuration (symfony,mysql,git) that I don't want to spend time duplicating when I can just ssh and develop remotely or through netbeans remote editing features. My question is how can I use git to separate my site into three areas: live, staging and dev. Here's my initial thought: public_html (live site and git repo) testing: a mirror of the site used for visual tests (full git repo) dev/ticket# : git branches of public_html used for features and bug fixes (full git repo) Version Control with git: Initial setup: cd public_html git init git add * git commit -m ‘initial commit of the site’ cd .. git clone public_html testing mkdir dev Development: cd /dev git clone ../testing ticket# all work is done in ./dev/ticket#, then visit www.domain.com/dev/ticket# to visually test make granular commits as necessary until dev is done git push origin master:ticket# if the above fails: merge latest testing state into current dev work: git merge origin/master then try the push again mark ticket# as ready for integration integration and deployment process: cd ../../testing git merge ticket# -m "integration test for ticket# --no-ff (check for conflicts ) run hudson tests visit www.domain.com/testing for visual test if all tests pass: if this ticket marks the end of a big dev sprint: make a snapshot with git tag git push --tags origin else git push origin cd ../public_html git checkout -f (live site should have the latest dev from ticket#) else: revert the merge: git checkout master~1; git commit -m "reverting ticket#" update ticket# that testing failed with the failure details Snapshots: Each major deployment sprint should have a standard name and should be tracked. Method: git tag Naming convention: TBD Reverting site to previous state If something goes wrong, then revert to previous snapshot and debug the issue in dev with a new ticket#. Once the bug is fixed, follow the deployment process again. My questions: Does this workflow make sense, if not, any recommendations Is my approach for reverting correct or is there a better way to say 'revert to before x commit'

  Read the article

• How to know which partition is which?

  - by user206870

  Well I was just wondering what partition belongs to which. On my computer I have Windows 7 and two Ubuntu systems (it was an accident, which is why I need to know which partition is which). So how do I know which one is which?? PS here's the codes: jp@jp-Satellite-L555D:~$ sudo update-grub [sudo] password for jp: Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.11.0-12-generic Found initrd image: /boot/initrd.img-3.11.0-12-generic Found memtest86+ image: /boot/memtest86+.bin Found Windows 7 (loader) on /dev/sda1 Found Windows 7 (loader) on /dev/sda2 Found Windows Recovery Environment (loader) on /dev/sda3 Found Ubuntu 13.10 (13.10) on /dev/sda7 done jp@jp-Satellite-L555D:~$ sudo fdisk -l Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf6f5148e Device Boot Start End Blocks Id System /dev/sda1 * 2048 3074047 1536000 27 Hidden NTFS WinRE /dev/sda2 3074048 213421022 105173487+ 7 HPFS/NTFS/exFAT /dev/sda3 469676032 488396799 9360384 17 Hidden HPFS/NTFS /dev/sda4 213422078 469676031 128126977 5 Extended /dev/sda5 300185600 463910911 81862656 83 Linux /dev/sda6 463912960 469676031 2881536 82 Linux swap / Solaris /dev/sda7 213422080 300185599 43381760 83 Linux Partition table entries are not in disk order Thanks to whoever can answer this. Another quick question, what is the extended partition??

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >