Search Results

Search found 4868 results on 195 pages for 'foreach'.

Page 22/195 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

  • XNA 2D line-of-sight check

    - by bionicOnion
    I'm working on a top-down shooter in XNA, and I need to implement line-of-sight checking. I've come up with a solution that seems to work, but I get the nagging feeling that it won't be efficient enough to do every frame for multiple calls (the game already hiccups slightly at about 10 calls per frame). The code is below, but my general plan was to create a series of rectangles with a width and height of zero to act as points along the sight line, and then check to see if any of these rectangles intersects a ClutterObject (an interface I defined for things like walls or other obstacles) after first screening for any that can't possibly be in the line of sight (i.e. behind the viewer) or are too far away (a concession I made for efficiency). public static bool LOSCheck(Vector2 pos1, Vector2 pos2) { Vector2 currentPos = pos1; Vector2 perMove = (pos2 - pos1); perMove.Normalize(); HashSet<ClutterObject> clutter = new HashSet<ClutterObject>(); foreach (Room r in map.GetRooms()) { if (r != null) { foreach (ClutterObject c in r.GetClutter()) { if (c != null &&!(c.GetRectangle().X * perMove.X < 0) && !(c.GetRectangle().Y * perMove.Y < 0)) { Vector2 cVector = new Vector2(c.GetRectangle().X, c.GetRectangle().Y); if ((cVector - pos1).Length() < 1500) clutter.Add(c); } } } } while (currentPos != pos2 && ((currentPos - pos1).Length() < 1500)) { Rectangle position = new Rectangle((int)currentPos.X, (int)currentPos.Y, 0, 0); foreach (ClutterObject c in clutter) { if (position.Intersects(c.GetRectangle())) return false; } currentPos += perMove; } return true; } I'm sure that there's a better way to do this (or at least a way to make this method more efficient), but I'm not too used to XNA yet, so I figured it couldn't hurt to bring it here. At the very least, is there an efficient to determine which objects may be in front of the viewer with greater precision than the rather broad 90 degree window I've given myself?

    Read the article

  • Dynamic Tab Implementation in ADF

    - by Vijay Mohan
    Well, this can be a common usecase across apps to open tabs dynamically at runtime based on the request.Well, in order to achieve this you can have a parent container, lets say a panelTab component.Inside panelTab , u can have a showDetailItem inside an af:foreach or an af:iterator binded to a bean static list which will have as many show detail items as you wish to be shown.something like this.private static List = { new showDetailItem("1"),new ShowDetailItem("2") ...};now in the backing bean you can have a method that takes care of rendering and disclosing an specific tab based on the index.public void openMyTab(){List<MyItems> list = refToParentContainer.getChildren();int indexOfTabToBeOpened = //Write a method that will compute the tab index of the next //tab.list.get(index).setRendered(true);list.get(index).setDisclosed(true);similarly you can set other properties too.}Else, instead of having af:foreach/iterator iterating through the SD items , you can go for static SDs in the page with render property set to false and then you can follow the same approach to render/disclose it at runtime.

    Read the article

  • 2D Selective Gaussian Blur

    - by Joshua Thomas
    I am attempting to use Gaussian blur on a 2D platform game, selectively blurring specific types of platforms with different amounts. I am currently just messing around with simple test code, trying to get it to work correctly. What I need to eventually do is create three separate render targets, leave one normal, blur one slightly, and blur the last heavily, then recombine on the screen. Where I am now is I have successfully drawn into a new render target and performed the gaussian blur on it, but when I draw it back to the screen everything is purple aside from the platforms I drew to the target. This is my .fx file: #define RADIUS 7 #define KERNEL_SIZE (RADIUS * 2 + 1) //----------------------------------------------------------------------------- // Globals. //----------------------------------------------------------------------------- float weights[KERNEL_SIZE]; float2 offsets[KERNEL_SIZE]; //----------------------------------------------------------------------------- // Textures. //----------------------------------------------------------------------------- texture colorMapTexture; sampler2D colorMap = sampler_state { Texture = <colorMapTexture>; MipFilter = Linear; MinFilter = Linear; MagFilter = Linear; }; //----------------------------------------------------------------------------- // Pixel Shaders. //----------------------------------------------------------------------------- float4 PS_GaussianBlur(float2 texCoord : TEXCOORD) : COLOR0 { float4 color = float4(0.0f, 0.0f, 0.0f, 0.0f); for (int i = 0; i < KERNEL_SIZE; ++i) color += tex2D(colorMap, texCoord + offsets[i]) * weights[i]; return color; } //----------------------------------------------------------------------------- // Techniques. //----------------------------------------------------------------------------- technique GaussianBlur { pass { PixelShader = compile ps_2_0 PS_GaussianBlur(); } } This is the code I'm using for the gaussian blur: public Texture2D PerformGaussianBlur(Texture2D srcTexture, RenderTarget2D renderTarget1, RenderTarget2D renderTarget2, SpriteBatch spriteBatch) { if (effect == null) throw new InvalidOperationException("GaussianBlur.fx effect not loaded."); Texture2D outputTexture = null; Rectangle srcRect = new Rectangle(0, 0, srcTexture.Width, srcTexture.Height); Rectangle destRect1 = new Rectangle(0, 0, renderTarget1.Width, renderTarget1.Height); Rectangle destRect2 = new Rectangle(0, 0, renderTarget2.Width, renderTarget2.Height); // Perform horizontal Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget1); effect.CurrentTechnique = effect.Techniques["GaussianBlur"]; effect.Parameters["weights"].SetValue(kernel); effect.Parameters["colorMapTexture"].SetValue(srcTexture); effect.Parameters["offsets"].SetValue(offsetsHoriz); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(srcTexture, destRect1, Color.White); spriteBatch.End(); // Perform vertical Gaussian blur. game.GraphicsDevice.SetRenderTarget(renderTarget2); outputTexture = (Texture2D)renderTarget1; effect.Parameters["colorMapTexture"].SetValue(outputTexture); effect.Parameters["offsets"].SetValue(offsetsVert); spriteBatch.Begin(0, BlendState.Opaque, null, null, null, effect); spriteBatch.Draw(outputTexture, destRect2, Color.White); spriteBatch.End(); // Return the Gaussian blurred texture. game.GraphicsDevice.SetRenderTarget(null); outputTexture = (Texture2D)renderTarget2; return outputTexture; } And this is the draw method affected: public void Draw(SpriteBatch spriteBatch) { device.SetRenderTarget(maxBlur); spriteBatch.Begin(); foreach (Brick brick in blueBricks) brick.Draw(spriteBatch); spriteBatch.End(); blue = gBlur.PerformGaussianBlur((Texture2D) maxBlur, helperTarget, maxBlur, spriteBatch); spriteBatch.Begin(); device.SetRenderTarget(null); foreach (Brick brick in redBricks) brick.Draw(spriteBatch); foreach (Brick brick in greenBricks) brick.Draw(spriteBatch); spriteBatch.Draw(blue, new Rectangle(0, 0, blue.Width, blue.Height), Color.White); foreach (Brick brick in purpleBricks) brick.Draw(spriteBatch); spriteBatch.End(); } I'm sorry about the massive brick of text and images(or not....new user, I tried, it said no), but I wanted to get my problem across clearly as I have been searching for an answer to this for quite a while now. As a side note, I have seen the bloom sample. Very well commented, but overly complicated since it deals in 3D; I was unable to take what I needed to learn form it. Thanks for any and all help.

    Read the article

  • Only draw visible objects to the camera in 2D

    - by Deukalion
    I have Map, each map has an array of Ground, each Ground consists of an array of VertexPositionTexture and a texture name reference so it renders a texture at these points (as a shape through triangulation). Now when I render my map I only want to get a list of all objects that are visible in the camera. (So I won't loop through more than I have to) Structs: public struct Map { public Ground[] Ground { get; set; } } public struct Ground { public int[] Indexes { get; set; } public VertexPositionNormalTexture[] Points { get; set; } public Vector3 TopLeft { get; set; } public Vector3 TopRight { get; set; } public Vector3 BottomLeft { get; set; } public Vector3 BottomRight { get; set; } } public struct RenderBoundaries<T> { public BoundingBox Box; public T Items; } when I load a map: foreach (Ground ground in CurrentMap.Ground) { Boundaries.Add(new RenderBoundaries<Ground>() { Box = BoundingBox.CreateFromPoints(new Vector3[] { ground.TopLeft, ground.TopRight, ground.BottomLeft, ground.BottomRight }), Items = ground }); } TopLeft, TopRight, BottomLeft, BottomRight are simply the locations of each corner that the shape make. A rectangle. When I try to loop through only the objects that are visible I do this in my Draw method: public int Draw(GraphicsDevice device, ICamera camera) { BoundingFrustum frustum = new BoundingFrustum(camera.View * camera.Projection); // Visible count int count = 0; EffectTexture.World = camera.World; EffectTexture.View = camera.View; EffectTexture.Projection = camera.Projection; foreach (EffectPass pass in EffectTexture.CurrentTechnique.Passes) { pass.Apply(); foreach (RenderBoundaries<Ground> render in Boundaries.Where(m => frustum.Contains(m.Box) != ContainmentType.Disjoint)) { // Draw ground count++; } } return count; } When I try adding just one ground, then moving the camera so the ground is out of frame it still returns 1 which means it still gets draw even though it's not within the camera's view. Am I doing something or wrong or can it be because of my Camera? Any ideas why it doesn't work?

    Read the article

  • Xna model parts are overlying others

    - by Federico Chiaravalli
    I am trying to import in XNA an .fbx model exported with blender. Here is my drawing code public void Draw() { Matrix[] modelTransforms = new Matrix[Model.Bones.Count]; Model.CopyAbsoluteBoneTransformsTo(modelTransforms); foreach (ModelMesh mesh in Model.Meshes) { foreach (BasicEffect be in mesh.Effects) { be.EnableDefaultLighting(); be.World = modelTransforms[mesh.ParentBone.Index] * GameCamera.World * Translation; be.View = GameCamera.View; be.Projection = GameCamera.Projection; } mesh.Draw(); } } The problem is that when I start the game some model parts are overlying others instead of being behind. I've tried to download other models from internet but they have the same problem.

    Read the article

  • How to draw textures on a model

    - by marc wellman
    The following code is a complete XNA 3.1 program almost unaltered to that code skeleton Visual Studio is creating when creating a new project. The only things I have changed are imported a .x model to the content folder of the VS solution. (the model is a simple square with a texture spanning over it - made in Google Sketchup and exported with several .x exporters) in the Load() method I am loading the .x model into the game. The Draw() method uses a BasicEffect to render the model. Except these three things I haven't added any code. Why does the model does not show the texture ? What can I do to make the texture visible ? This is the texture file (a standard SketchUp texture from the palette): And this is what my program looks like - as you can see: No texture! Find below the complete source code of the program AND the complete .x file: namespace WindowsGame1 { /// <summary> /// This is the main type for your game /// </summary> public class Game1 : Microsoft.Xna.Framework.Game { GraphicsDeviceManager graphics; SpriteBatch spriteBatch; public Game1() { graphics = new GraphicsDeviceManager(this); Content.RootDirectory = "Content"; } /// <summary> /// Allows the game to perform any initialization it needs to before starting to run. /// This is where it can query for any required services and load any non-graphic /// related content. Calling base.Initialize will enumerate through any components /// and initialize them as well. /// </summary> protected override void Initialize() { // TODO: Add your initialization logic here base.Initialize(); } Model newModel; /// <summary> /// LoadContent will be called once per game and is the place to load /// all of your content. /// </summary> protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); // TODO: usse this.Content to load your game content here newModel = Content.Load<Model>(@"aau3d"); foreach (ModelMesh mesh in newModel.Meshes) { foreach (ModelMeshPart meshPart in mesh.MeshParts) { meshPart.Effect = new BasicEffect(this.GraphicsDevice, null); } } } /// <summary> /// UnloadContent will be called once per game and is the place to unload /// all content. /// </summary> protected override void UnloadContent() { // TODO: Unload any non ContentManager content here } /// <summary> /// Allows the game to run logic such as updating the world, /// checking for collisions, gathering input, and playing audio. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here base.Update(gameTime); } /// <summary> /// This is called when the game should draw itself. /// </summary> /// <param name="gameTime">Provides a snapshot of timing values.</param> protected override void Draw(GameTime gameTime) { if (newModel != null) { GraphicsDevice.Clear(Color.CornflowerBlue); Matrix[] transforms = new Matrix[newModel.Bones.Count]; newModel.CopyAbsoluteBoneTransformsTo(transforms); foreach (ModelMesh mesh in newModel.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.TextureEnabled = true; effect.World = transforms[mesh.ParentBone.Index] * Matrix.CreateRotationY(0) * Matrix.CreateTranslation(new Vector3(0, 0, 0)); effect.View = Matrix.CreateLookAt(new Vector3(200, 1000, 200), Vector3.Zero, Vector3.Up); effect.Projection = Matrix.CreatePerspectiveFieldOfView(MathHelper.ToRadians(45.0f), 0.75f, 1.0f, 10000.0f); } mesh.Draw(); } } base.Draw(gameTime); } } } This is the model I am using (.x): xof 0303txt 0032 // SketchUp 6 -> DirectX (c)2008 edecadoudal, supports: faces, normals and textures Material Default_Material{ 1.0;1.0;1.0;1.0;; 3.2; 0.000000;0.000000;0.000000;; 0.000000;0.000000;0.000000;; } Material _Groundcover_RiverRock_4inch_{ 0.568627450980392;0.494117647058824;0.427450980392157;1.0;; 3.2; 0.000000;0.000000;0.000000;; 0.000000;0.000000;0.000000;; TextureFilename { "aau3d.xGroundcover_RiverRock_4inch.jpg"; } } Mesh mesh_0{ 4; -81.6535;0.0000;74.8031;, -0.0000;0.0000;0.0000;, -81.6535;0.0000;0.0000;, -0.0000;0.0000;74.8031;; 2; 3;0,1,2, 3;1,0,3;; MeshMaterialList { 2; 2; 1, 1; { Default_Material } { _Groundcover_RiverRock_4inch_ } } MeshTextureCoords { 4; -2.1168,-3.4022; 1.0000,-0.0000; 1.0000,-3.4022; -2.1168,-0.0000;; } MeshNormals { 4; 0.0000;1.0000;-0.0000; 0.0000;1.0000;-0.0000; 0.0000;1.0000;-0.0000; 0.0000;1.0000;-0.0000;; 2; 3;0,1,2; 3;1,0,3;; } }

    Read the article

  • How can I turn a SimpleXML object to array, then shuffle?

    - by Joshua Cody
    Crux of my problem: I've got an XML file that returns 20 results. Within these results are all the elements I need to get. Now, I need to return them in a random order, and be able to specifically work with item 1, items 2-5, and items 6-17. Idea 1: Use this script to convert the object to an array, which I can shuffle through. This is close to working, but a few of the elements I need to get are under a different namespace, and I don't seem to be able to get them. Code: /* * Convert a SimpleXML object into an array (last resort). * * @access public * @param object $xml * @param boolean $root - Should we append the root node into the array * @return array */ function xmlToArray($xml, $root = true) { if (!$xml->children()) { return (string)$xml; } $array = array(); foreach ($xml->children() as $element => $node) { $totalElement = count($xml->{$element}); if (!isset($array[$element])) { $array[$element] = ""; } // Has attributes if ($attributes = $node->attributes()) { $data = array( 'attributes' => array(), 'value' => (count($node) > 0) ? xmlToArray($node, false) : (string)$node // 'value' => (string)$node (old code) ); foreach ($attributes as $attr => $value) { $data['attributes'][$attr] = (string)$value; } if ($totalElement > 1) { $array[$element][] = $data; } else { $array[$element] = $data; } // Just a value } else { if ($totalElement > 1) { $array[$element][] = xmlToArray($node, false); } else { $array[$element] = xmlToArray($node, false); } } } if ($root) { return array($xml->getName() => $array); } else { return $array; } } $thumbfeed = simplexml_load_file('http://gdata.youtube.com/feeds/api/videos?q=skadaddlemedia&max-results=20&orderby=published&prettyprint=true'); $xmlToArray = xmlToArray($thumbfeed); $thumbArray = $xmlToArray["feed"]; for($n = 0; $n < 18; $n++){ $title = $thumbArray["entry"][$n]["title"]["value"]; $desc = $thumbArray["entry"][0]["content"]["value"]; $videoUrl = $differentNamespace; $thumbUrl = $differentNamespace; } Idea 2: Continue using my working code that is getting the information using a foreach, but store each element in an array, then use shuffle on that. I'm not precisely sure hwo to write to an array within a foreach loop and not write over one another, though. Working code: foreach($thumbfeed->entry as $entry){ $thumbmedia = $entry->children('http://search.yahoo.com/mrss/') ->group ; $thumb = $thumbmedia->thumbnail[0]->attributes()->url; $thumburl = $thumbmedia->content[0]->attributes()->url; $thumburl1 = explode("http://www.youtube.com/v/", $thumburl[0]); $thumbid = explode("?f=videos&app=youtube_gdata", $thumburl1[1]); $thumbtitle = $thumbmedia->title; $thumbyt = $thumbmedia->children('http://gdata.youtube.com/schemas/2007') ->duration ; $thumblength = $thumbyt->attributes()->seconds; } Ideas on if either of these are good solutions to my problem, and if so, how I can get over my execution humps? Thanks so much for any help you can give.

    Read the article

  • Retrieving model position after applying modeltransforms in XNA

    - by Glen Dekker
    For this method that the goingBeyond XNA tutorial provides, it would be really convenient if I could retrieve the new position of the model after I apply all the transforms to the mesh. I have edited the method a little for what I need. Does anyone know a way I can do this? public void DrawModel( Camera camera ) { Matrix scaleY = Matrix.CreateScale(new Vector3(1, 2, 1)); Matrix temp = Matrix.CreateScale(100f) * scaleY * rotationMatrix * translationMatrix * Matrix.CreateRotationY(MathHelper.Pi / 6) * translationMatrix2; Matrix[] modelTransforms = new Matrix[model.Bones.Count]; model.CopyAbsoluteBoneTransformsTo(modelTransforms); if (camera.getDistanceFromPlayer(position+position1) > 3000) return; foreach (ModelMesh mesh in model.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.EnableDefaultLighting(); effect.World = modelTransforms[mesh.ParentBone.Index] * temp * worldMatrix; effect.View = camera.viewMatrix; effect.Projection = camera.projectionMatrix; } mesh.Draw(); } }

    Read the article

  • How attach a model with another model on a specific bone?

    - by Mehdi Bugnard
    I meet a difficulty attached to a model to another model on a "bone" accurate. I searched several forums but no result. I saw that many people have asked the same question but no real result see no response. Thread found : How to attach two XNA models together? How can I attach a model to the bone of another model? http://stackoverflow.com/questions/11391852/attach-model-xna But I think it is possible. Here is my code example attached a "cube" of the hand of my player private void draw_itemActionAttached(Model modelInUse) { Matrix[] Model1TransfoMatrix = new Matrix[this.player.Model.Bones.Count]; this.player.Model.CopyAbsoluteBoneTransformsTo(Model1TransfoMatrix); foreach (ModelMesh mesh in modelInUse.Meshes) { foreach (BasicEffect effect in mesh.Effects) { Matrix model2Transform = Matrix.CreateScale(1f) * Matrix.CreateFromYawPitchRoll(0, 0, 0); effect.World = model2Transform * Model1TransfoMatrix[0]; //root bone index effect.View = arcadia.camera.View; effect.Projection = arcadia.camera.Projection; } mesh.Draw(); } }

    Read the article

  • yield – Just yet another sexy c# keyword?

    - by George Mamaladze
    yield (see NSDN c# reference) operator came I guess with .NET 2.0 and I my feeling is that it’s not as wide used as it could (or should) be.   I am not going to talk here about necessarity and advantages of using iterator pattern when accessing custom sequences (just google it).   Let’s look at it from the clean code point of view. Let's see if it really helps us to keep our code understandable, reusable and testable.   Let’s say we want to iterate a tree and do something with it’s nodes, for instance calculate a sum of their values. So the most elegant way would be to build a recursive method performing a classic depth traversal returning the sum.           private int CalculateTreeSum(Node top)         {             int sumOfChildNodes = 0;             foreach (Node childNode in top.ChildNodes)             {                 sumOfChildNodes += CalculateTreeSum(childNode);             }             return top.Value + sumOfChildNodes;         }     “Do One Thing” Nevertheless it violates one of the most important rules “Do One Thing”. Our  method CalculateTreeSum does two things at the same time. It travels inside the tree and performs some computation – in this case calculates sum. Doing two things in one method is definitely a bad thing because of several reasons: ·          Understandability: Readability / refactoring ·          Reuseability: when overriding - no chance to override computation without copying iteration code and vice versa. ·          Testability: you are not able to test computation without constructing the tree and you are not able to test correctness of tree iteration.   I want to spend some more words on this last issue. How do you test the method CalculateTreeSum when it contains two in one: computation & iteration? The only chance is to construct a test tree and assert the result of the method call, in our case the sum against our expectation. And if the test fails you do not know wether was the computation algorithm wrong or was that the iteration? At the end to top it all off I tell you: according to Murphy’s Law the iteration will have a bug as well as the calculation. Both bugs in a combination will cause the sum to be accidentally exactly the same you expect and the test will PASS. J   Ok let’s use yield! That’s why it is generally a very good idea not to mix but isolate “things”. Ok let’s use yield!           private int CalculateTreeSumClean(Node top)         {             IEnumerable<Node> treeNodes = GetTreeNodes(top);             return CalculateSum(treeNodes);         }             private int CalculateSum(IEnumerable<Node> nodes)         {             int sumOfNodes = 0;             foreach (Node node in nodes)             {                 sumOfNodes += node.Value;             }             return sumOfNodes;         }           private IEnumerable<Node> GetTreeNodes(Node top)         {             yield return top;             foreach (Node childNode in top.ChildNodes)             {                 foreach (Node currentNode in GetTreeNodes(childNode))                 {                     yield return currentNode;                 }             }         }   Two methods does not know anything about each other. One contains calculation logic another jut the iteration logic. You can relpace the tree iteration algorithm from depth traversal to breath trevaersal or use stack or visitor pattern instead of recursion. This will not influence your calculation logic. And vice versa you can relace the sum with product or do whatever you want with node values, the calculateion algorithm is not aware of beeng working on some tree or graph.  How about not using yield? Now let’s ask the question – what if we do not have yield operator? The brief look at the generated code gives us an answer. The compiler generates a 150 lines long class to implement the iteration logic.       [CompilerGenerated]     private sealed class <GetTreeNodes>d__0 : IEnumerable<Node>, IEnumerable, IEnumerator<Node>, IEnumerator, IDisposable     {         ...        150 Lines of generated code        ...     }   Often we compromise code readability, cleanness, testability, etc. – to reduce number of classes, code lines, keystrokes and mouse clicks. This is the human nature - we are lazy. Knowing and using such a sexy construct like yield, allows us to be lazy, write very few lines of code and at the same time stay clean and do one thing in a method. That's why I generally welcome using staff like that.   Note: The above used recursive depth traversal algorithm is possibly the compact one but not the best one from the performance and memory utilization point of view. It was taken to emphasize on other primary aspects of this post.

    Read the article

  • Can this be improved? Scrubbing of dangerous html tags.

    - by chobo2
    I been finding that for something that I consider pretty import there is very little information or libraries on how to deal with this problem. I found this while searching. I really don't know all the million ways that a hacker could try to insert the dangerous tags. I have a rich html editor so I need to keep non dangerous tags but strip out bad ones. So is this script missing anything? It uses html agility pack. public string ScrubHTML(string html) { HtmlDocument doc = new HtmlDocument(); doc.LoadHtml(html); //Remove potentially harmful elements HtmlNodeCollection nc = doc.DocumentNode.SelectNodes("//script|//link|//iframe|//frameset|//frame|//applet|//object|//embed"); if (nc != null) { foreach (HtmlNode node in nc) { node.ParentNode.RemoveChild(node, false); } } //remove hrefs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//a[starts-with(translate(@href, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("href", "#"); } } //remove img with refs to java/j/vbscript URLs nc = doc.DocumentNode.SelectNodes("//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'javascript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'jscript')]|//img[starts-with(translate(@src, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'vbscript')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.SetAttributeValue("src", "#"); } } //remove on<Event> handlers from all tags nc = doc.DocumentNode.SelectNodes("//*[@onclick or @onmouseover or @onfocus or @onblur or @onmouseout or @ondoubleclick or @onload or @onunload]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("onFocus"); node.Attributes.Remove("onBlur"); node.Attributes.Remove("onClick"); node.Attributes.Remove("onMouseOver"); node.Attributes.Remove("onMouseOut"); node.Attributes.Remove("onDoubleClick"); node.Attributes.Remove("onLoad"); node.Attributes.Remove("onUnload"); } } // remove any style attributes that contain the word expression (IE evaluates this as script) nc = doc.DocumentNode.SelectNodes("//*[contains(translate(@style, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', 'abcdefghijklmnopqrstuvwxyz'), 'expression')]"); if (nc != null) { foreach (HtmlNode node in nc) { node.Attributes.Remove("stYle"); } } return doc.DocumentNode.WriteTo(); } Edit 2 people have suggested whitelisting. I actually like the idea of whitelisting but never actually did it because no one can actually tell me how to do it in C# and I can't even really find tutorials for how to do it in c#(the last time I looked. I will check it out again). How do you make a white list? Is it just a list collection? How do you actual parse out all html tags, script tags and every other tag? Once you have the tags how do you determine which ones are allowed? Compare them to you list collection? But what happens if the content is coming in and has like 100 tags and you have 50 allowed. You got to compare each of those 100 tag by 50 allowed tags. Thats quite a bit to go through and could be slow. Once you found a invalid tag how do you remove it? I don't really want to reject a whole set of text if one tag was found to be invalid. I rather remove and insert the rest. Should I be using html agility pack?

    Read the article

  • Power Distribution amongst connected nodes

    - by Perky
    In my game the map is represented by connected nodes, each node has a number of connected nodes. The nodes represent a system in which players can build structures and move units about. If you're familiar with Sins of a Solar Empire the game map is very similar. I want each node to be able to produce power and share it with all connected nodes. For example if A, B, C & D are all connected and produce 100 power units, then each system should have 400 power units available. If node B builds a structure that consumes 100 power units then A, B, C & D should then have 300 power units available. I've been working on this system all day and haven't been able to get it working quite the way I want. My current implementation is to first recurse through each nodes's connected node adding up the power, I keep a list of closed nodes so it doesn't loop, it's quite similar to A* actually. Pseudo code: All nodes start with the properties node.power = 0 node.basePower = 100 // could be different for each node. node.initialPower = node.basePower - function propagatePower( node, initialPower, closedNodes ) node.power += initialPower add( closedNodes, node ) connectedNodes = connected_nodes_except_from( closedNodes ) foreach node in connectedNodes do propagatePower( node, initialPower, closedNodes ) end end After this I iterate through all power consumers. foreach consumer in consumers do node = consumer.parentNode if node.power >= consumer.powerConsumption then consumer.powerConsumed += consumer.powerConsumption node.producedPower -= consumer.powerConsumption end end Then I adjust the initial power for the next propagation cycle. foreach node in nodes do node.initialPower = node.basePower - node.producedPower node.displayPower = node.power // for rendering the power. node.power = 0 end This seemed to work at first but then I came into a problem. Say two nodes A & B produce 100Pu each, it's shared so both A & B have 200Pu. I then make two structures that consume 80Pu each on A (160Pu). Then the nodes power is adjusted to basePower - producedPower (100-160 = -60). Nodes are propagated, both nodes now have 40Pu (A: -60 + B: 100 = 40). Which is correct because they started with 200Pu - 160Pu = 40Pu. However now node.power >= consumer.powerConsumption is false. Whats worse is it's false for any structure that uses more that 40Pu, so the whole system goes down. I could deduct from consumer.powerConsumption but what do I do if power is reduced elsewhere? I don't have the correct data to perform the necessary checks. It's late so I'm probably not thinking straight but I thought to ask on here to see if anyone has any other implementations, better or worse I'd be interested to know.

    Read the article

  • Different ways of solving problems in code.

    - by Erin
    I now program in C# for a living but before that I programmed in python for 5 years. I have found that I write C# very differently than most examples I see on the web. Rather then writing things like: foreach (string bar in foo) { //bar has something doen to it here } I write code that looks like this. foo.ForEach( c => c.someActionhere() ) Or var result = foo.Select( c => { //Some code here to transform the item. }).ToList(); I think my using code like above came from my love of map and reduce in python - while not exactly the same thing, the concepts are close. Now it's time for my question. What concepts do you take and move with you from language to language; that allow you to solve a problem in a way that is not the normal accepted solution in that language?

    Read the article

  • MVC Persist Collection ViewModel (Update, Delete, Insert)

    - by Riccardo Bassilichi
    In order to create a more elegant solution I'm curios to know your suggestion about a solution to persist a collection. I've a collection stored on DB. This collection go to a webpage in a viewmodel. When the go back from the webpage to the controller I need to persist the modified collection to the same DB. The simple solution is to delete the stored collection and recreate all rows. I need a more elegant solution to mix the collections and delete not present record, update similar records ad insert new rows. this is my Models and ViewModels. public class CustomerModel { public virtual string Id { get; set; } public virtual string Name { get; set; } public virtual IList<PreferredAirportModel> PreferedAirports { get; set; } } public class AirportModel { public virtual string Id { get; set; } public virtual string AirportName { get; set; } } public class PreferredAirportModel { public virtual AirportModel Airport { get; set; } public virtual int CheckInMinutes { get; set; } } // ViewModels public class CustomerViewModel { [Required] public virtual string Id { get; set; } public virtual string Name { get; set; } public virtual IList<PreferredAirporViewtModel> PreferedAirports { get; set; } } public class PreferredAirporViewtModel { [Required] public virtual string AirportId { get; set; } [Required] public virtual int CheckInMinutes { get; set; } } And this is the controller with not elegant solution. public class CustomerController { public ActionResult Save(string id, CustomerViewModel viewModel) { var session = SessionFactory.CurrentSession; var customer = session.Query<CustomerModel>().SingleOrDefault(el => el.Id == id); customer.Name = viewModel.Name; // How cai I Merge collections handling delete, update and inserts ? var modifiedPreferedAirports = new List<PreferredAirportModel>(); var modifiedPreferedAirportsVm = new List<PreferredAirporViewtModel>(); // Update every common Airport foreach (var airport in viewModel.PreferedAirports) { foreach (var custPa in customer.PreferedAirports) { if (custPa.Airport.Id == airport.AirportId) { modifiedPreferedAirports.Add(custPa); modifiedPreferedAirportsVm.Add(airport); custPa.CheckInMinutes = airport.CheckInMinutes; } } } // Remove common airports from ViewModel modifiedPreferedAirportsVm.ForEach(el => viewModel.PreferedAirports.Remove(el)); // Remove deleted airports from model var toDelete = customer.PreferedAirports.Except(modifiedPreferedAirports); toDelete.ForEach(el => customer.PreferedAirports.Remove(el)); // Add new Airports var toAdd = viewModel.PreferedAirports.Select(el => new PreferredAirportModel { Airport = session.Query<AirportModel>(). SingleOrDefault(a => a.Id == el.AirportId), CheckInMinutes = el.CheckInMinutes }); toAdd.ForEach(el => customer.PreferedAirports.Add(el)); session.Save(customer); return View(); } } My environment is ASP.NET MVC 4, nHibernate, Automapper, SQL Server. Thank You!!

    Read the article

  • How to attach two XNA models together?

    - by jeangil
    I go back on unsolved question I asked about attaching two models together, could you give me some help on this ? For example, If I want to attach together Model1 (= Main model) & Model2 ? I have to get the transformation matrix of Model1 and after get the Bone index on Model1 where I want to attach Model2 and then apply some transformation to attach Model2 to Model1 I wrote some code below about this, but It does not work at all !! (6th line of my code seems to be wrong !?) Model1TransfoMatrix=New Matrix[Model1.Bones.Count]; Index=Model1.bone[x].Index; foreach (ModelMesh mesh in Model2.Meshes) { foreach(BasicEffect effect in mesh.effects) { matrix model2Transform = Matrix.CreateScale(0.1.0f)*Matrix.CreateFromYawPitchRoll(x,y,z); effect.World= model2Transform *Model1TransfoMatrix[Index]; effect.view = camera.View; effect.Projection= camera.Projection; } mesh.draw(); }

    Read the article

  • LINQ and ArcObjects

    - by Marko Apfel
    Motivation LINQ (language integrated query) is a component of the Microsoft. NET Framework since version 3.5. It allows a SQL-like query to various data sources such as SQL, XML etc. Like SQL also LINQ to SQL provides a declarative notation of problem solving – i.e. you don’t need describe in detail how a task could be solved, you describe what to be solved at all. This frees the developer from error-prone iterator constructs. Ideally, of course, would be to access features with this way. Then this construct is conceivable: var largeFeatures = from feature in features where (feature.GetValue("SHAPE_Area").ToDouble() > 3000) select feature; or its equivalent as a lambda expression: var largeFeatures = features.Where(feature => (feature.GetValue("SHAPE_Area").ToDouble() > 3000)); This requires an appropriate provider, which manages the corresponding iterator logic. This is easier than you might think at first sight - you have to deliver only the desired entities as IEnumerable<IFeature>. LINQ automatically establishes a state machine in the background, whose execution is delayed (deferred execution) - when you are really request entities (foreach, Count (), ToList (), ..) an instantiation processing takes place, although it was already created at a completely different place. Especially in multiple iteration through entities in the first debuggings you are rubbing your eyes when the execution pointer jumps magically back in the iterator logic. Realization A very concise logic for constructing IEnumerable<IFeature> can be achieved by running through a IFeatureCursor. You return each feature via yield. For an easier usage I have put the logic in an extension method Getfeatures() for IFeatureClass: public static IEnumerable<IFeature> GetFeatures(this IFeatureClass featureClass, IQueryFilter queryFilter, RecyclingPolicy policy) { IFeatureCursor featureCursor = featureClass.Search(queryFilter, RecyclingPolicy.Recycle == policy); IFeature feature; while (null != (feature = featureCursor.NextFeature())) { yield return feature; } //this is skipped in unit tests with cursor-mock if (Marshal.IsComObject(featureCursor)) { Marshal.ReleaseComObject(featureCursor); } } So you can now easily generate the IEnumerable<IFeature>: IEnumerable<IFeature> features = _featureClass.GetFeatures(RecyclingPolicy.DoNotRecycle); You have to be careful with the recycling cursor. After a delayed execution in the same context it is not a good idea to re-iterated on the features. In this case only the content of the last (recycled) features is provided and all the features are the same in the second set. Therefore, this expression would be critical: largeFeatures.ToList(). ForEach(feature => Debug.WriteLine(feature.OID)); because ToList() iterates once through the list and so the the cursor was once moved through the features. So the extension method ForEach() always delivers the same feature. In such situations, you must not use a recycling cursor. Repeated executions of ForEach() is not a problem, because for every time the state machine is re-instantiated and thus the cursor runs again - that's the magic already mentioned above. Perspective Now you can also go one step further and realize your own implementation for the interface IEnumerable<IFeature>. This requires that only the method and property to access the enumerator have to be programmed. In the enumerator himself in the Reset() method you organize the re-executing of the search. This could be archived with an appropriate delegate in the constructor: new FeatureEnumerator<IFeatureclass>(_featureClass, featureClass => featureClass.Search(_filter, isRecyclingCursor)); which is called in Reset(): public void Reset() { _featureCursor = _resetCursor(_t); } In this manner, enumerators for completely different scenarios could be implemented, which are used on the client side completely identical like described above. Thus cursors, selection sets, etc. merge into a single matter and the reusability of code is increasing immensely. On top of that in automated unit tests an IEnumerable could be mocked very easily - a major step towards better software quality. Conclusion Nevertheless, caution should be exercised with these constructs in performance-relevant queries. Because of managing a state machine in the background, a lot of overhead is created. The processing costs additional time - about 20 to 100 percent. In addition, working without a recycling cursor is fast a performance gap. However declarative LINQ code is much more elegant, flawless and easy to maintain than manually iterating, compare and establish a list of results. The code size is reduced according to experience an average of 75 to 90 percent! So I like to wait a few milliseconds longer. As so often it has to be balanced between maintainability and performance - which for me is gaining in priority maintainability. In times of multi-core processors, the processing time of most business processes is anyway not dominated by code execution but by waiting for user input. Demo source code The source code for this prototype with several unit tests, you can download here: https://github.com/esride-apf/Linq2ArcObjects. .

    Read the article

  • How to do MVC the right way

    - by Ieyasu Sawada
    I've been doing MVC for a few months now using the CodeIgniter framework in PHP but I still don't know if I'm really doing things right. What I currently do is: Model - this is where I put database queries (select, insert, update, delete). Here's a sample from one of the models that I have: function register_user($user_login, $user_profile, $department, $role) { $department_id = $this->get_department_id($department); $role_id = $this->get_role_id($role); array_push($user_login, $department_id, $role_id); $this->db->query("INSERT INTO tbl_users SET username=?, hashed_password=?, salt=?, department_id=?, role_id=?", $user_login); $user_id = $this->db->insert_id(); array_push($user_profile, $user_id); $this->db->query(" INSERT INTO tbl_userprofile SET firstname=?, midname=?, lastname=?, user_id=? ", $user_profile); } Controller - talks to the model, calls up the methods in the model which queries the database, supplies the data which the views will display(success alerts, error alerts, data from database), inherits a parent controller which checks if user is logged in. Here's a sample: function create_user(){ $this->load->helper('encryption/Bcrypt'); $bcrypt = new Bcrypt(15); $user_data = array( 'username' => 'Username', 'firstname' => 'Firstname', 'middlename' => 'Middlename', 'lastname' => 'Lastname', 'password' => 'Password', 'department' => 'Department', 'role' => 'Role' ); foreach ($user_data as $key => $value) { $this->form_validation->set_rules($key, $value, 'required|trim'); } if ($this->form_validation->run() == FALSE) { $departments = $this->user_model->list_departments(); $it_roles = $this->user_model->list_roles(1); $tc_roles = $this->user_model->list_roles(2); $assessor_roles = $this->user_model->list_roles(3); $data['data'] = array('departments' => $departments, 'it_roles' => $it_roles, 'tc_roles' => $tc_roles, 'assessor_roles' => $assessor_roles); $data['content'] = 'admin/create_user'; parent::error_alert(); $this->load->view($this->_at, $data); } else { $username = $this->input->post('username'); $salt = $bcrypt->getSalt(); $hashed_password = $bcrypt->hash($this->input->post('password'), $salt); $fname = $this->input->post('firstname'); $mname = $this->input->post('middlename'); $lname = $this->input->post('lastname'); $department = $this->input->post('department'); $role = $this->input->post('role'); $user_login = array($username, $hashed_password, $salt); $user_profile = array($fname, $mname, $lname); $this->user_model->register_user($user_login, $user_profile, $department, $role); $data['content'] = 'admin/view_user'; parent::success_alert(4, 'User Sucessfully Registered!', 'You may now login using your account'); $data['data'] = array('username' => $username, 'fname' => $fname, 'mname' => $mname, 'lname' => $lname, 'department' => $department, 'role' => $role); $this->load->view($this->_at, $data); } } Views - this is where I put html, css, and JavaScript code (form validation code for the current form, looping through the data supplied by controller, a few if statements to hide and show things depending on the data supplied by the controller). <!--User registration form--> <form class="well min-form" method="post"> <div class="form-heading"> <h3>User Registration</h3> </div> <label for="username">Username</label> <input type="text" id="username" name="username" class="span3" autofocus> <label for="password">Password</label> <input type="password" id="password" name="password" class="span3"> <label for="firstname">First name</label> <input type="text" id="firstname" name="firstname" class="span3"> <label for="middlename">Middle name</label> <input type="text" id="middlename" name="middlename" class="span3"> <label for="lastname">Last name</label> <input type="text" id="lastname" name="lastname" class="span3"> <label for="department">Department</label> <input type="text" id="department" name="department" class="span3" list="list_departments"> <datalist id="list_departments"> <?php foreach ($data['departments'] as $row) { ?> <option data-id="<?php echo $row['department_id']; ?>" value="<?php echo $row['department']; ?>"><?php echo $row['department']; ?></option> <?php } ?> </datalist> <label for="role">Role</label> <input type="text" id="role" name="role" class="span3" list=""> <datalist id="list_it"> <?php foreach ($data['it_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <datalist id="list_collection"> <?php foreach ($data['tc_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <datalist id="list_assessor"> <?php foreach ($data['assessor_roles'] as $row) { ?> <option data-id="<?php echo $row['role_id']; ?>" value="<?php echo $row['role']; ?>"><?php echo $row['role']; ?></option> <?php } ?> </datalist> <p> <button type="submit" class="btn btn-success">Create User</button> </p> </form> <script> var departments = []; var roles = []; $('#list_departments option').each(function(i){ departments[i] = $(this).val(); }); $('#list_it option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#list_collection option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#list_assessor option').each(function(i){ roles[roles.length + 1] = $(this).val(); }); $('#department').blur(function(){ var department = $.trim($(this).val()); $('#role').attr('list', 'list_' + department); }); var password = new LiveValidation('password'); password.add(Validate.Presence); password.add(Validate.Length, {minimum: 10}); $('input[type=text]').each(function(i){ var field_id = $(this).attr('id'); var field = new LiveValidation(field_id); field.add(Validate.Presence); if(field_id == 'department'){ field.add(Validate.Inclusion, {within : departments}); } else if(field_id == 'role'){ field.add(Validate.Inclusion, {within : roles}) } }); </script> The codes above are actually code from the application that I'm currently working on. I'm working on it alone so I don't really have someone to review my code for me and point out the wrong things in it so I'm posting it here in hopes that someone could point out the wrong things that I've done in here. I'm also looking for some guidelines in writing MVC code like what are the things that should be and shouldn't be included in views, models and controllers. How else can I improve the current code that I have right now. I've written some really terrible code before(duplication of logic, etc.) that's why I want to improve my code so that I can easily maintain it in the future. Thanks!

    Read the article

  • SpriteBatch.Begin() making my model not render correctly

    - by manning18
    I was trying to output some debug information using DrawString when I noticed my model suddenly was being rendered like it was inside-out (like the culling had been disabled or something) and the texture maps weren't applied I commented out the DrawString method until I only had SpriteBatch.Begin() and .End() and that was enough to cause the model rendering corruption - when I commented those calls out the model rendered correctly What could this be a symptom of? I've stripped it down to the barest of code to isolate the problem and this is what I noticed. Draw code below (as stripped down as possible) GraphicsDevice.Clear(Color.LightGray); foreach (ModelMesh mesh in TIEAdvanced.Meshes) { foreach (Effect effect in mesh.Effects) { if (effect is BasicEffect) ((BasicEffect)effect).EnableDefaultLighting(); effect.CurrentTechnique.Passes[0].Apply(); } } spriteBatch.Begin(); spriteBatch.DrawString(spriteFont, "Camera Position: " + cameraPosition.ToString(), new Vector2(10, 10), Color.Blue); spriteBatch.End(); GraphicsDevice.DepthStencilState = DepthStencilState.Default; TIEAdvanced.Draw(Matrix.CreateScale(0.025f), viewMatrix, projectionMatrix);

    Read the article

  • Why isn't garbage collection being activated in my code? [migrated]

    - by Netmoon
    I have a foreach statement in my code, where each iteration calculates huge amounts of data and goes to the next iteration. I run this code, but when I read the log, I see there's a memory leak error. PHP.net says when this happens, using gc_enabled() is a good way to handle this. I've added these lines to last line of the foreach block: echo "Check GC enabled : " . gc_enabled(); echo "Number of affected cycles : " . gc_collect_cycles(); And this is the output: Check GC enabled : 1 Number of affected cycles : 0 Why do cycles exist, but the affected cycles is 0?

    Read the article

  • Weird appearance for a 3D XNA ground

    - by Belos
    I wanted to add a ground so I can know the position of a helicopter in the world. But the ground appeared in a weird way: http://i.stack.imgur.com/yTSuW.jpg The ground had the following texture: http://i.stack.imgur.com/pdpxB.png EDIT: Sorry, I forgot to post the code: public class ImportModel { public Vector3 Position { get; set; } public Vector3 Rotation { get; set; } public Vector3 Scale { get; set; } Model Model; Matrix[] modeltransforms; GraphicsDevice GraphicDevice; ContentManager Content; BoundingSphere sphere; bool boundingimplemented = false; public ImportModel(string model, GraphicsDevice gd, ContentManager cm, Vector3 position, Vector3 rot, Vector3 sca) { GraphicDevice = gd; Content = cm; Position = position; Rotation = rot; Scale = sca; Model = Content.Load<Model>(model); modeltransforms = new Matrix[Model.Bones.Count]; Model.CopyAbsoluteBoneTransformsTo(modeltransforms); } public void Draw(Camera camera) { Matrix baseworld = Matrix.CreateScale(Scale) * Matrix.CreateFromYawPitchRoll(Rotation.Y, Rotation.X, Rotation.Z) * Matrix.CreateTranslation(Position); foreach (ModelMesh mesh in Model.Meshes) { Matrix localworld = modeltransforms[mesh.ParentBone.Index] * baseworld; foreach (ModelMeshPart meshpart in mesh.MeshParts) { BasicEffect effect = (BasicEffect)meshpart.Effect; effect.World = localworld; effect.View = camera.View; effect.Projection = camera.Projection; effect.EnableDefaultLighting(); } mesh.Draw(); } } public BoundingSphere BoundingSphere { get { if (!boundingimplemented) { foreach (ModelMesh mesh in Model.Meshes) { BoundingSphere transformed = mesh.BoundingSphere.Transform( modeltransforms[mesh.ParentBone.Index]); sphere = BoundingSphere.CreateMerged(sphere, transformed); } Matrix worldTransform = Matrix.CreateScale(Scale) * Matrix.CreateTranslation(Position); BoundingSphere transforme = sphere; transforme = transforme.Transform(worldTransform); return transforme; } else { Matrix worldTransform = Matrix.CreateScale(Scale) * Matrix.CreateTranslation(Position); BoundingSphere transformed = sphere; transformed = transformed.Transform(worldTransform); return transformed; } } } } Then I call the class from the Game1 class: ImportModel ground = new ImportModel("ground", GraphicsDevice, Content, Vector3.Zero, Vector3.Zero, new Vector3(20f)); EDIT2:This is how the scene looks from top: i.stack.imgur.com/Hs983.jpg

    Read the article

  • Models from 3ds max lose their transformations when input into XNA

    - by jacobian
    I am making models in 3ds max. However when I export them to .fbx format and then input them into XNA, they lose their scaling. -It is most likely something to do with not using the transforms from the model correctly, is the following code correct -using xna 3.0 Matrix[] transforms=new Matrix[playerModel.Meshes.Count]; playerModel.CopyAbsoluteBoneTransformsTo(transforms); // Draw the model. int count = 0; foreach (ModelMesh mesh in playerModel.Meshes) { foreach (BasicEffect effect in mesh.Effects) { effect.World = transforms[count]* Matrix.CreateScale(scale) * Matrix.CreateRotationX((float)MathHelper.ToRadians(rx)) * Matrix.CreateRotationY((float)MathHelper.ToRadians(ry)) * Matrix.CreateRotationZ((float)MathHelper.ToRadians(rz))* Matrix.CreateTranslation(position); effect.View = view; effect.Projection = projection; effect.EnableDefaultLighting(); } count++; mesh.Draw(); }

    Read the article

  • Deferent ways of solving problems in code.

    - by Erin
    I now program in C# for a living but before that I programmed in python for 5 years. I have found that I write C# very that most examples I see on the web. Rather then writing things like: foreach (string bar in foo) { //bar has something doen to it here } I write code that looks like this. foo.ForEach( c => c.someActionhere() ) Or var result = foo.Select( c => { //Some code here to transform the item. }).ToList(); I think my using code like above came form my love of map and reduce in python while not exactly the same thing the concepts are close. Now it's time for my question. What concepts do you take and move with you from language to language. That allow you to solve a problem in a way that is not the normal accepted solution in that language?

    Read the article

  • PHP user created function return values problem

    - by faX
    Okay I'm new here and I have been trying to figure this out all day I have two functions one calling the other but my functions only returns the last value for example 29 when it should return multiple values. As wondering how can I fix this problem so that my functions return all the values. Here is my PHP code. function parent_comments(){ if(articles_parent_comments_info($_GET['article_id']) !== false){ foreach(articles_parent_comments_info($_GET['article_id']) as $comment_info){ $comment_id = filternum($comment_info['comment_id']); reply_comment_count($comment_id); } } } function reply_comment_count($parent_id){ if(articles_reply_comments_info($_GET['article_id']) !== false){ foreach(articles_reply_comments_info($_GET['article_id']) as $reply_info){ $comment_id = filternum($reply_info['comment_id']); $reply_id = filternum($reply_info['parent_id']); if($parent_id === $reply_id){ reply_comment_count($comment_id); } } } return $comment_id; }

    Read the article

  • Using str_replace with smarty variable

    - by zx
    Hello, Basically I just want to strip out a part of my smarty variable contents. {foreach from=$_sequences key=k item=v} {if $v.pri == $smarty.get.cf && $v.type == 'TTS'} {$v.data} {/if} {/foreach} {$v.data} will echo out 21,5555555555 I want it to only echo out 5555555555. I tried str_replace but couldn't get it working.. str_replace('"','',${v.data});// - doesn't work str_replace('"','',$v.data);// - doesn't work What would be the best way I can accomplish this?

    Read the article

  • WPF FlowDocument: force calculation of height etc. "off screen"

    - by Lars
    My target: a DocumentPaginator which takes a FlowDocument with a table, which splits the table to fit the pagesize and repeat the header/footer (special tagged TableRowGroups) on every page. For splitting the table I have to know the heights of its rows. While building the FlowDocument-table by code, the height/width of the TableRows are 0 (of course). If I assign this document to a FlowDocumentScrollViewer (PageSize is set), the heights etc. are calculated. Is this possible without using an UI-bound object? Instantiating a FlowDocumentScrollViewer which is not bound to a window doesn't force the pagination/calculation of the heights. This is how I determine the height of a TableRow (which works perfectly for documents shown by a FlowDocumentScrollViewer): FlowDocument doc = BuildNewDocument(); // what is the scrollviewer doing with the FlowDocument? FlowDocumentScrollViewer dv = new FlowDocumentScrollViewer(); dv.Document = doc; dv.Arrange(new Rect(0, 0, 0, 0)); TableRowGroup dataRows = null; foreach (Block b in doc.Blocks) { if (b is Table) { Table t = b as Table; foreach (TableRowGroup g in t.RowGroups) { if ((g.Tag is String) && ((String)g.Tag == "dataRows")) { dataRows = g; break; } } } if (dataRows != null) break; } if (dataRows != null) { foreach (TableRow r in dataRows.Rows) { double maxCellHeight = 0.0; foreach (TableCell c in r.Cells) { Rect start = c.ElementStart.GetCharacterRect(LogicalDirection.Forward); Rect end = c.ElementEnd.GetNextInsertionPosition(LogicalDirection.Backward).GetCharacterRect(LogicalDirection.Forward); double cellHeight = end.Bottom - start.Top; if (cellHeight > maxCellHeight) maxCellHeight = cellHeight; } System.Diagnostics.Trace.WriteLine("row " + dataRows.Rows.IndexOf(r) + " = " + maxCellHeight); } } Edit: I added the FlowDocumentScrollViewer to my example. The call of "Arrange" forces the FlowDocument to calculate its heights etc. I would like to know, what the FlowDocumentScrollViewer is doing with the FlowDocument, so I can do it without the UIElement. Is it possible?

    Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >