Search Results

Search found 1470 results on 59 pages for 'suspend resume'.

Page 22/59 | < Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >

• With a typical USB hard drive enclosure, is the full range of drive power management functionality available?

  - by intuited

  In what may be an unrelated matter: is it possible to suspend a PC without unmounting an attached USB-powered drive, and then remounting it on resume? This is the behaviour I'm currently seeing (running Ubuntu linux 10.10). Are there certain models or brands that provide more complete control over this aspect of drive operation? My Friendly Neighbourhood Computer Store carries (part of) the Vantec Nexstar product line.

  Read the article

• What does the `dmesg` error: "composite sync not supported" mean?

  - by M. Tibbits

  Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

  Read the article

• "Error detecting shell" when launching Gnome Tweak Tool

  - by user70988

  It was working before I started the process of installing Gnome. I've poked around on Google but can't find anything. If I log into Gnome the screen is massively zoomed in and I have to pan around the page. I was hoping the appropriate setting would be in the tweak tool. __ WARNING : Error detecting shell Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell_extensions.py", line 149, in __init__ shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 143, in __init__ proxy = _ShellProxy() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 44, in __init__ result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Shell not running Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 59, in __init__ self._shell = GnomeShellFactory().get_shell() File "/usr/lib/python2.7/dist-packages/gtweak/utils.py", line 38, in getinstance instances[cls] = cls() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 143, in __init__ proxy = _ShellProxy() File "/usr/lib/python2.7/dist-packages/gtweak/gshellwrapper.py", line 44, in __init__ result, output = self.proxy.Eval('(s)', js) File "/usr/lib/python2.7/dist-packages/gi/overrides/Gio.py", line 148, in __call__ kwargs.get('flags', 0), kwargs.get('timeout', -1), None) File "/usr/lib/python2.7/dist-packages/gi/types.py", line 43, in function return info.invoke(*args, **kwargs) GError: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.Shell was not provided by any .service files WARNING : Could not list shell extensions Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 64, in __init__ extensions = self._shell.list_extensions() AttributeError: ShellThemeTweak instance has no attribute '_shell' Traceback (most recent call last): File "/usr/bin/gnome-tweak-tool", line 76, in <module> MainWindow() File "/usr/lib/python2.7/dist-packages/gtweak/mainwindow.py", line 44, in __init__ model) File "/usr/lib/python2.7/dist-packages/gtweak/tweakview.py", line 40, in __init__ self._model.load_tweaks() File "/usr/lib/python2.7/dist-packages/gtweak/tweakmodel.py", line 135, in load_tweaks mods = __import__("gtweak.tweaks", globals(), locals(), tweak_files, 0) File "/usr/lib/python2.7/dist-packages/gtweak/tweaks/tweak_shell.py", line 236, in <module> GSettingsSwitchTweak("org.gnome.settings-daemon.plugins.power", "lid-close-suspend-with-external-monitor"), File "/usr/lib/python2.7/dist-packages/gtweak/widgets.py", line 116, in __init__ _GSettingsTweak.__init__(self, schema_name, key_name, **options) File "/usr/lib/python2.7/dist-packages/gtweak/widgets.py", line 105, in __init__ options.get("summary",self.settings.schema_get_summary(key_name)), File "/usr/lib/python2.7/dist-packages/gtweak/gsettings.py", line 122, in schema_get_summary return self._schema._schema[key]["summary"] KeyError: 'lid-close-suspend-with-external-monitor'

  Read the article

• andengine - how to make the game wait for an animation to finish?

  - by petervaz

  I'm teaching myself andengine while trying to make a match-3 puzzle, so far I have a grid of gems that I populate and can move then around. Matching gems and new gems falling is working already. My problem is that the game keeps flowing while animations runs. How can I make the flow suspend until movement is done? I use entity modifiers for the gems animations. MoveYModifier for the fall and PathModifier for the swap.

  Read the article

• Can't see default icons and the panel on the top

  - by adi

  Unfortunately I just installed Ubuntu 12.04 and I can't see default icons and the panel on the top. But the most fustrating that some of the icons sure in there place, because if i move my mause over where the icon should be (and click) options are jumping out:eg:suspend, shut down, printer... And i can open libre office 3 by clicking the place where it should be displayed. The other probel is the stalling. Anyone has an idea? Thanks:Adam

  Read the article

• Shut down/log out, me menu absent in panel

  - by Chethan S.

  I upgraded my Lucid installation to Maverick today via an alternate CD. Everything went fine but the shut down icon which provides the options to log out, suspend, hibernate etc. in the top right corner of the panel and the me menu which allows to set chat status are absent! I tried searching for suitable options in 'Add to Panel' but cannot find the exact solution - shut down provides option only to shut down, log out only to log out and so on.

  Read the article

• How do I prevent Ubuntu gradually slowing down to a stop?

  - by user29165

  I really do not know what is causing the problem of my desktop environment (D.E.) gradually slowing down. It seems to happen in Gnome 3.2, LXDE, XFCE, and KDE. I am running Ubuntu 11.10 and this problem started happening from a fresh install. I have noticed that if I restart Gnome or otherwise re-log-in with any of the D.E.s the speed resets to normal. I don't seem to have and memory leaks that account for it and there are not any processes that are using excessive CPU cycles. Due to the symptoms I am guessing that there is an underlying package that interacts with all D.E.s that is the source of the problem. Just to clarify, in extreme situations, if I let the slowdown continue without a restart of the D.E. my system will finally get to a point where everything, even my clock, freezes. The time over which Gnome slows down (noticeably after 17 hrs) is much less than LXDE, or XFCE but eventually they freeze as well. I didn't mention Unity since I haven't used it enough to verify the problem, but I don't see why it should be different. Just in case this is relevant, I Suspend my computer rather than turn it off. I do this because of the greatly reduced load time and the 17 hrs I stated above is actual up-time, not time where the D.E. is actually active. However, the slow down does not seem to be affected by how long the computer has been in suspend mode. I know that it is possible that this problem is due to an interaction between two or more of the applications that I use and as such it may not be able to be duplicated by others. In the end I am just wondering (a) are other people experiencing this issue and (b) does anyone have some advice on where to start looking for a solution if one is not already known. I am even open to the idea of switching to the beta release of 12.04 if anyone thinks it will solve the problem. Edit: I took a video of my latest freeze that you can watch at http://youtu.be/flKUqUzCmdE, sorry about the audio. Edit: Since that video I checked my memory for errors and tried installing the proprietary video drivers. No memory errors were found and the proprietary video drivers made the display unusable so I had to uninstall them. Any thoughts?

  Read the article

• What is the laptop that FULLY compatible with Ubuntu?

  - by user63187

  i have met alot of problems with all ubuntu releases on my current laptop (DELL inspiron N4030), such as: out loud fan low battery life screen brightness returns to maximum after every startup weak support for my VGA (Mobility Radeon HD 5430 Series ATI card) ubuntu is probably not scaling my processors correctly sometimes ubuntu hangs after return from suspend sometimes ubuntu doesn't shutdown correctly Now, it's time to change my laptop for good, Can you HELP me to choose a laptop that FULLY compatible with ubuntu releases, please notice that Not every laptop are available in libyan markets.

  Read the article

• Set Idle Time in Ubuntu 12.04 Server

  - by ssanj

  I recently installed Ubuntu 12.04 Server and am looking for away for get the server to suspend after an idle time. When using the desktop version I could use the Gnome powersaving tool to specify the idle time. As I have no GUI on the server is there a way to set the server idle time via the commandline/config file? I will send the server a wake-on-lan packet to wake it up, if it is suspended and I need to use it.

  Read the article

• How to make the game wait for an animation to finish?

  - by petervaz

  I'm teaching myself andengine while trying to make a match-3 puzzle, so far I have a grid of gems that I populate and can move then around. Matching gems and new gems falling is working already. My problem is that the game keeps flowing while animations runs. How can I make the flow suspend until movement is done? I use entity modifiers for the gems animations. MoveYModifier for the fall and PathModifier for the swap.

  Read the article

• Telnet does not give a response

  - by floorish

  Some wireless access points are acting a little weird, so I want to reboot them every couple of hours. Luckily there exists a security flaw which lets me login as root through telnet when using port 1111 (without username and password). Now I want to use that to let my QNAP NAS execute the reboot command through telnet every now and then. The problem is however that that telnet version doesn't give any response if I connect to the AP. The telnet I use on OSX works just fine but the one on the NAS not. BusyBox v1.01 (2012.06.14-18:35+0000) multi-call binary Usage: telnet [-a] [-l USER] HOST [PORT] When I execute telnet <HOST> 1111 nothing happens. I can send the escape character ^] which gives me the following options: Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet The only way to get some commands executed is by suspending telnet with z followed by some random command which isn't recognized. Then the prompt shows this: # telnet 192.168.1.5 1111 ^] Console escape. Commands are: l go to line mode c go to character mode z suspend telnet e exit telnet z continuing... asdf Illegal command. 00> After that I am able to communicate with the AP, but when I exit the telnet session and try the same again, the AP refuses to connect at all and it must be manually rebooted (looks like the telnet session isn't shut down properly on the AP). So the question is what commands should I execute in order to communicate with the AP using the Busybox telnet version of the QNAP? (No, can't use ssh unfortunately)

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by BlueBill

  Hi all, I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: "fsck from util-linux-ng 2.16" There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots? Thanks, Troy

  Read the article

• Why do fonts sometimes look "fat" on Mac OS X?

  - by jtimberman

  Sometimes when resuming from suspend, the fonts in Mac OS X look "fatter" than normal. Unfortunately right now I can't get my Macbook Pro to exhibit the "normal" behavior for comparison, it has been abnormal yesterday and today. If I can get screenshots of what I think is 'normal', I'll add them. "Fixing" this has been random. I use an external monitor, and sometimes unplugging it and plugging back in, or even turning it off and back on has worked. Sometimes with the display attached (or not) detecting displays works. Sometimes logging out or rebooting entirely is what it takes. Displays used: Macbook Pro 15" built-in display Dell 27" LCD (2009 model) Software where I see this happen, at least most noticably: Firefox (screenshots below) iTerm Things MacIrssi (screenshots below) I am using Mac OS X 10.5.8. "Abnormal" view from MacIrssi with Inconsolata 16 pt. image full size "Abnormal" view from Firefox. Finally got it to switch back, though after resuming from suspend its back to "fat" :-(. image full size And 'normal' in Firefox:

  Read the article

• Ubuntu NBR karmic boot freezes at fsck from util-linux-ng 2.16

  - by Bluebill

  I have a netbook (emachine e250 - equivalent to an acer aspire one) and I have Ubunutu NBR 9.10 installed on it. Every other cold boot freezes at the following error message: fsck from util-linux-ng 2.16 There is no disk activity, no activity what so ever. I have left the machine sit for over an hour and nothing. It takes a couple of hard resets to be able to boot properly. Once it boots everything works great (wireless, suspend/resume, etc.)! I have spent the last couple of weeks researching the problem and the only thing that seems to work is setting nolapic in the boot string in grub - it boots every time. Unfortunately, nolapic disables the second core and causes problems with suspend resume. At first I thought it was an fsck problem with the first partition on the hard disk as it is a hidden ntfs partition containing the windows xp recover information. So in /etc/fstab I set the partition so that it would be ignored by fsck. This didn't seem to do anything. I have these partitions: /dev/sda1 - an ntfs recovery partition /dev/sda2 - /boot /dev/sda3 - swap /dev/sda5 - / /dev/sda6 - /home I am running kernel version 2.6.31-19-generic and have all the patches (as indicated by update manager). I also have no splash screen so I can see the boot progress. I have only been using NBR since January, I have been using Ubuntu on my desktop since last June (2009-06). What logs should I be looking at? Is there a log for failed boots?

  Read the article

• Adding references from VBA Causing Password Prompt To Appear

  - by ChloeRadshaw

  EDIT: I WILL GIVE A 300 rep BOUNTY FOR THIS:-) I have run out of ideas. I have a very simple macro that adds references. It looks like I have the same problem as this http://www.eggheadcafe.com/software/aspnet/35651964/excel-prompts-for-vba-pas.aspx Sub testAddSolver() Call AddSolver() End Sub Sub AddSolver() Dim strSolverPath As String Dim wbSolver As Workbook Dim objRef As Object Dim oWB As Object ' NOT as workbook Dim ad As AddIn On Error GoTo errH Set oWB = ActiveWorkbook With Application.AddIns("Solver Add-In") strSolverPath = .FullName On Error Resume Next Set wbSolver = Workbooks(.name) On Error GoTo errH If wbSolver Is Nothing Then .Installed = True End If End With On Error Resume Next Set objRef = oWB.VBProject.References("SOLVER") On Error GoTo errH If objRef Is Nothing Then Call MsgBox(strSolverPath) oWB.VBProject.References.AddFromFile strSolverPath End If Call MsgBox("Compleetd") Exit Sub errH: MsgBox Err.Description, , "Error in AddSolver" End Sub This adding references works fine until I put a password around the VBA at which point it prompts me for a password. I have tried absolutely everything

  Read the article

• Upload large files in .NET

  - by Austin

  I've done a good bit of research to find an upload component for .NET that I can use to upload large files, has a progress bar, and can resume the upload of large files. I've come across some components like AjaxUploader, SlickUpload, and PowUpload, to name a few. Each of these options cost money and only PowUpload does the resumable upload, but it does it with a java applet. I'm willing to pay for a component that does those things well, but if I could write it myself that would be best. I have two questions: Is it possible to resume a file upload on the client without using flash/java/Silverlight? Does anyone have some code or a link to an article that explains how to write a .NET HTTPHandler that will allow streaming upload and an ajax progress bar? Thank you, Austin [Edit] I realized I do need to be able to do resumable file uploads for my project, any suggestions for components that can do that?

  Read the article

• Can't see images used in slideshow or other jQuery plug-ins in Internet Explorer 8

  - by Kais

  I am getting a weird error. I can see images in slideshow, lightbox, etc. in Firefox and Chrome but in Internet Explorer 8 there are no images. Something is wrong with JavaScript/jQuery I think. I am using jQuery 1.4.2, jquery.flow.1.2.min.js jquery.bgpos.js jquery.easing.1.3.js jquery.lightbox-0.5.min.js jquery.validate.js cufon-yui.js jquery.galleriffic.js DD_belatedPNG.js clearbox.js Please check this. I have pasted images under slideshow, you can see those at http://kaisweb.com/projects/resume/ and http://kaisweb.com/projects/resume/index.php?p=templates. I tried to search but couldn't find anything. Even if I remove jQuery, still there are no images in Internet Explorer 8.

  Read the article

• I need to stop execution during recursive algorithm

  - by Shaza

  Hey, I have a problem in choosing the right method to accomplish my goal. I'm working on Algorithms teaching system, I'm using C#. I need to divide my algorithm into steps, each step will contain a recursion. I have to stop execution after each step, user can then move to the next step(next recursion) using a button in my GUI. After searching, threads was the right choice, but I found several methods: (Thread.sleep/interrupt): didn't work, my GUI freezed !! (Suspend/Resume): I've read that it's a bad idea to use. (Waithandles): still reading about them. (Monitor wait/resume). I don't have much time to try and read all previous methods, please help me in choosing the best method that fits my system.Any suggestions are extremal welcomed.

  Read the article

• What's happening between onResume and the activity is really displayed?

  - by Johnny

  I didn't nothing in the onResume of my Activity, but it still takes about 5 seconds between the onResume is called and the activity is really displayed. What's happening under there? Here is the code snip: onResume: @Override protected void onResume() { Log.d(TAG, "on resume >>>"); super.onResume(); } logcat: 05-28 10:36:05.621 D/LoginDialogActivity( 447): on resume >>> 05-28 10:36:06.231 I/ARMAssembler( 52): generated scanline__00000077:03010104_00000004_00000000 [ 22 ipp] (41 ins) at [0x3e3358:0x3e33fc] in 5646001 ns 05-28 10:36:10.690 I/ActivityManager( 52): Displayed activity com.aimi.appstore/.ui.activity.LoginDialogActivity: 5169 ms (total 5331 ms) AndroidManifest.xml: <activity android:name=".ui.activity.LoginDialogActivity" android:theme="@android:style/Theme.Dialog" />

  Read the article

• Cant see images used in slideshow or other jquery plugins in ie8

  - by Kais

  i am getting a weird error, i can see images in slideshow, lightbox etc in firefox and chrome but in ie8 there are no images. something wrong with javascript/jquery i think. i am using jquery-1.4.2, jquery.flow.1.2.min.js ,jquery.bgpos.js, jquery.easing.1.3.js, jquery.lightbox-0.5.min.js, jquery.validate.js, cufon-yui.js, jquery.galleriffic.js, DD_belatedPNG.js,clearbox.js Please check this , i have pasted images under slideshow , you can see those. http://kaisweb.com/projects/resume/ http://kaisweb.com/projects/resume/index.php?p=templates i tried to search but couldnt find anything. even if i remove jquery, still there are no images in ie8. Thanks

  Read the article

• Problem in suspending 2 threads at the same time in MFC!

  - by kiddo

  I am learning about threading and multithreading..so i just created a small application in which i will update the progressbar and a static text using threading.I vl get two inputs from the user, start and end values for how long the loop should rotate.I have 2threads in my application. Thread1- to update the progressbar(according to the loop) the static text which will show the count(loop count). Thread2 - to update the another static text which will just diplay a name Basically if the user clicks start, the progressbar steps up and at the same time filecount and the name are displayed parallely. There's is another operation where if the user clicks pause it(thread) has to suspend until the user clicks resume. The problem is,the above will not work(will not suspend and resume) for both thread..but works for a singlw thread. Please check the code to get an idea and reply me what can done! on button click start void CThreadingEx3Dlg::OnBnClickedStart() { m_ProgressBar.SetRange(start,end); myThread1 = AfxBeginThread((AFX_THREADPROC)MyThreadFunction1,this); myThread2 = AfxBeginThread((AFX_THREADPROC)MyThreadFunction2,this); } thread1 UINT MyThreadFunction1(LPARAM lparam) { CThreadingEx3Dlg* pthis = (CThreadingEx3Dlg*)lparam; for(int intvalue =pthis->start;intvalue<=pthis->end; ++intvalue) { pthis->SendMessage(WM_MY_THREAD_MESSAGE1,intvalue); } return 0; } thread1 function LRESULT CThreadingEx3Dlg::OnThreadMessage1(WPARAM wparam,LPARAM lparam) { int nProgress= (int)wparam; m_ProgressBar.SetPos(nProgress); CString strStatus; strStatus.Format(L"Thread1:Processing item: %d", nProgress); m_Static.SetWindowText(strStatus); Sleep(100); return 0; } thread2 UINT MyThreadFunction2(LPARAM lparam) { CThreadingEx3Dlg* pthis = (CThreadingEx3Dlg*)lparam; for(int i =pthis->start;i<=pthis->end;i++) { pthis->SendMessage(WM_MY_THREAD_MESSAGE2,i); } return 0; } thread2 function LRESULT CThreadingEx3Dlg::OnThreadMessage2(WPARAM wparam,LPARAM lparam) { m_Static1.GetDlgItem(IDC_STATIC6); m_Static1.SetWindowTextW(L"Thread2 Running"); Sleep(100); m_Static1.SetWindowTextW(L""); Sleep(100); return TRUE; } void CThreadingEx3Dlg::OnBnClickedPause() { // TODO: Add your control notification handler code here if(!m_Track) { m_Track = TRUE; GetDlgItem(IDCANCEL)->SetWindowTextW(L"Resume"); myThread1->SuspendThread(); WaitForSingleObject(myThread1->m_hThread,INFINITE); myThread2->SuspendThread(); m_Static.SetWindowTextW(L"Paused.."); } else { m_Track = FALSE; GetDlgItem(IDCANCEL)->SetWindowTextW(L"Pause"); myThread1->ResumeThread(); myThread2->ResumeThread(); /*myEventHandler.SetEvent(); WaitForSingleObject(myThread1->m_hThread,INFINITE);*/ } }

  Read the article

• delaying asynchronous callbacks

  - by user158182

  how to give delays for a asynchronous callbacks, is there any way to pause,or resume(current process for a certain time),or any availability of sleep mode

  Read the article

• vba: a forever loop

  - by I__

  Sub something(tecan) On Error Resume Next Dim arr As New Collection, a Dim aFirstArray() As Variant Dim i As Long aFirstArray() = Array(Dir(tecan & "*.ESY", vbNormal)) aFirstArray(0) = Mid(aFirstArray(0), 1, 4) Do While Dir <> "" ReDim Preserve aFirstArray(UBound(aFirstArray) + 1) aFirstArray(UBound(aFirstArray)) = Mid(Dir, 1, 4) Loop On Error Resume Next For Each a In aFirstArray arr.Add a, a Next For i = 1 To arr.Count Cells(i, 1) = arr(i) 'open_esy (tecan & arr(i) & "*") Next Erase aFirstArray For i = 1 To arr.Count arr.Remove i Next i here is how i call this sub: something (tecan1) something (tecan2) on the first call it works and does what it is supposed to but on the second call it gets stuck in this loop: Do While Dir <> "" ReDim Preserve aFirstArray(UBound(aFirstArray) + 1) aFirstArray(UBound(aFirstArray)) = Mid(Dir, 1, 4) Loop why does it get stuck in the loop?

  Read the article

• How do I find the current virtual terminal

  - by camh

  I am working around a problem in Ubuntu 10.04 where after resume, the mouse cursor disappears. This can be "fixed" by running chvt 1; chvt 7 in a script in /etc/pm/sleep.d, such that those commands run on thaw and resume. However, the X console is not always vt #7, so chvt 7 is wrong in those cases. What I would like to do is find out the current vt in the fix-up script and make sure I change back to that vt. How can I find the current vt? (tty(1) just reports "not a tty")

  Read the article

• Download files using Perl

  - by Neeraj

  I have a project that depends upon some other binaries to be downloaded from web at install time.For this what i do is: if ( file-present-in-src/) # skip that file else # use wget to download the file The problem with this approach is that when I interrupt a download in middle, and do invoke the script next time, the partially downloaded file is also skipped (which is not desired), also I want wget to resume the download of the partially downloaded file. How should I go about it: Possible Solutions I could think of: Let the file to be downloaded to some file say download_tmp. Copy to original file if successful. Handle SIG{'INT'} to write proper cleanup code. But none of these could help resume the partial file download, Any insights?

  Read the article

< Previous Page | 18 19 20 21 22 23 24 25 26 27 28 29  | Next Page >