Search Results

Search found 25521 results on 1021 pages for 'static objects'.

Page 234/1021 | < Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >

• having 2 ip's on a debian 7 box

  - by David

  I just installed Debian Wheezy on my homeserver. I want to assign 2 ip's to it on the same network interface, 1 static ip (eth0) and 1 dynamic ip (eth0:1). I know it doesn't make much sense but I need it to test something. I edited my /etc/network/interfaces to be like this: auto lo eth0 eth0:1 iface lo inet loopback iface eth0 inet static address 192.168.178.240 network 192.168.178.0 netmask 255.255.255.0 broadcast 192.168.178.255 gateway 192.168.178.1 iface eth0:1 inet dhcp when I bring up eth0:1 (ifup eth0:1) I get the following error (eth0 works fine) Bind socket to interface: No such device Failed to bring up eth0:1. is it even possible to have a dynamic and static ip on the same network adapter?

  Read the article

• Searching for fast skeletal animation algorithm

  - by igf

  Is it theoretically possible to dynamicaly animate scene with 100-150 400 poly characters meshes on high-end GL ES 2.0 mobile devices or i definetley should use prerendered keyframe animation? Scene have only one light source and precalculated shadow maps. View from top like in Warcraft 3. No any other meshes or objects. 2d collision detecting between objects calculated via spatial hashing. It can be any other algorithm besides ragdoll, but it must supply fast and simple skeletal animation for frame with 100+ low poly meshes for each mesh. Any ideas?

  Read the article

• Test Driven Development Code Order

  - by Bobby Kostadinov

  I am developing my first project using test driven development. I am using Zend Framework and PHPUnit. Currently my project is at 100% code coverage but I am not sure I understand in what order I am supposed to write my code. Am I supposed to write my test FIRST with what my objects are expected to do or write my objects and then test them? Ive been working on completing a controller/model and then writing at test for it but I am not sure this is what TDD is about? Any advice? For example, I wrote my Auth plugin and my Auth controller and tested that they work properly in my browser, and then I sat down to write the tests for them, which proved that there were some logical errors in the code that did work in the browser.

  Read the article

• How to loop through a javascript object and check each key exists in a separate multidimensional object

  - by Paul Atkins

  I have 2 javascript objects and I am trying to loop through one object and check whether the key exists in a second multidimensional object going one level deeper each time. Here are the two objects var check = {'scope':'instance', 'item':'body', 'property': 'background'}; var values = {'instance': {'body' : {'background': '000000'}}}; b.map(check, function(key){ console.log(values[key]); }); How am I able to check 1 level deeper in the values object each time? What I am trying to do is check the values object as follows: 1st values['instance'] 2nd values['instance']['body'] 3rd values['instance']['body']['background'] Thanks

  Read the article

• What Are Some Tips For Writing A Large Number of Unit Tests?

  - by joshin4colours

  I've recently been tasked with testing some COM objects of the desktop app I work on. What this means in practice is writing a large number (100) unit tests to test different but related methods and objects. While the unit tests themselves are fairly straight forward (usually one or two Assert()-type checks per test), I'm struggling to figure out the best way to write these tests in a coherent, organized manner. What I have found is that copy and Paste coding should be avoided. It creates more problems than it's worth, and it's even worse than copy-and-paste code in production code because test code has to be more frequently updated and modified. I'm leaning toward trying an OO-approach using but again, the sheer number makes even this approach daunting from an organizational standpoint due to concern with maintenance. It also doesn't help that the tests are currently written in C++, which adds some complexity with memory management issues. Any thoughts or suggestions?

  Read the article

• How to Create a Skin Object from an OWS Configuration - 2 Videos

  In this video tutorial we walk you through how to create and place Open Web Studio skin objects directly into your DotNetNuke skin.We cover how to create an OWS menu and feedback form and how to convert those modules into DNN Skin Objects.The videos contain:Video 1 - Building the New OWS Configuration and Creating the Menu SystemVideo 2 - Placing the OWS Skin Object within the Skin File and Creating a Feedback Skin ObjectHow to Create a Skin Object from an OWS Configuration - 2 Videos Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Free Pluralsight Videos for this week

  - by TATWORTH

  Pluralsight have issued two free videoshttp://blog.pluralsight.com/2012/09/05/video-end-the-global-pollution-crisis-in-javascript/http://blog.pluralsight.com/2012/08/31/video-fake-it-until-you-make-it-with-fakeiteasy/Their exact words were: Free Videos this Week End the Global Pollution Crisis... In Javascript Too many globally scoped variables and functions can make Javascript code difficult to work with, particularly on large projects. See how to simulate the concept of namespaces using objects. Fake it Until You Make It with FakeItEasy FakeItEasy is a .NET framework for easily creating mock objects in tests. See how easy it is to FakeItEasy with complex nested hierarchies.

  Read the article

• Textures selectively not applying in Unity

  - by user46790

  On certain imported objects (fbx) in Unity, upon applying a material, only the base colour of the material is applied, with none of the tiled texture showing. This isn't universal; on a test model only some submeshes didn't show the texture, while some did. I have tried every combination of import/calculate normals/tangents to no avail. FYI I'm not exactly experienced with the software or gamedev in general; this is to make a small static scene with 3-4 objects max. One model tested was created in 3DSMax, the other in Blender. I've had this happen on every export from Blender, but only some submeshes from the 3DSMax model (internet sourced to test the problem)

  Read the article

• Assigning a different texture based on picking(XNA)

  - by Thomas Carmichael

  I'm making a game using XNA. I have some simple objects like cube and sphere, and I would like to change the texture of one face of these objects based on picking. That is, when the cursor is over one face, it turns red. The only way I've seen to do this is to overload the content processor as here: http://xbox.create.msdn.com/en-US/education/catalog/sample/picking_triangle but it seems like it shouldn't be this complicated. I'm using .x models, and would like to be able to implement this for more complex models in the future beyond cubes/spheres/etc. Is this the best/only way to go about it? I'll figure that out if that's what is necessary, but it seems that there would be a simpler solution to load a different texture to a face than I've seen, I just don't know what it is.

  Read the article

• Add & Show data in Java ArrayList [closed]

  - by Kaidul Islam Sazal

  I have a class inside a main class : static class Graph{ static int u, v, cost; } I have instantiated an arraylist of the class: static List<Graph> g = new ArrayList<Graph>(); And I insert several values into the arraylist like this: Scanner input = new Scanner(System.in); for (int i = 0; i < edge_no; i++) { Graph e = new Graph(); e.u = input.nextInt(); e.v = input.nextInt(); e.cost = input.nextInt(); g.add(e); } And I print it like this: for (int i = 0; i < edge_no; i++) { System.out.println(g.get(i).u + " " + g.get(i).v + " " + g.get(i).cost); } But the problem is that, when I print it, only the last value is shown all the time.It seems that, all the previous values are over-written with it. Input : 1 2 5 1 3 8 2 3 9 Output: 2 3 9 2 3 9 2 3 9 Expected output is just like the input.But I can't fix the problem as I am novice in java.

  Read the article

• How can I explain object-oriented programming to someone who's only coded in Fortran 77?

  - by Zonedabone

  My mother did her college thesis in Fortran, and now (over a decade later) needs to learn c++ for fluids simulations. She is able to understand all of the procedural programming, but no matter how hard I try to explain objects to her, it doesn't stick. (I do a lot of work with Java, so I know how objects work) I think I might be explaining it in too high-level ways, so it isn't really making sense to someone who's never worked with them at all and grew up in the age of purely procedural programming. Is there any simple way I can explain them to her that will help her understand?

  Read the article

• Repelling a rigidbody in the direction an object is rotating

  - by ndg

  Working in Unity, I have a game object which I rotate each frame, like so: void Update() { transform.Rotate(new Vector3(0, 1, 0) * speed * Time.deltaTime); } However, I'm running into problems when it comes to applying a force to rigidbodies that collide with this game objects sphere collider. The effect I'm hoping to achieve is that objects which touch the collider are thrown in roughly the same direction as the object is rotating. To do this, I've tried the following: Vector3 force = ((transform.localRotation * Vector3.forward) * 2000) * Time.deltaTime; collision.gameObject.rigidbody.AddForce(force, ForceMode.Impulse); Unfortunately this doesn't always match the rotation of the object. To debug the issue, I wrote a simple OnDrawGizmos script, which (strangely) appears to draw the line correctly oriented to the rotation. void OnDrawGizmos() { Vector3 pos = transform.position + ((transform.localRotation * Vector3.forward) * 2); Debug.DrawLine(transform.position, pos, Color.red); } You can see the result of the OnDrawGizmos function below: What am I doing wrong?

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• Is OOP becoming easier or harder?

  - by tunmise fasipe

  When the concepts of Object Oriented Programming were introduced to programmers years back it looks interesting and programming was cleaner. OOP was like this Stock stock = new Stock(); stock.addItem(item); stock.removeItem(item); That was easier to understand with self-descriptive name. But now OOP, with pattern like Data Transfer Objects (or Value Objects), Repository, Dependency Injection etc, has become more complex. To achieve the above you may have to create several classes (e.g. abstract, factory, DAO etc) and Implement several interfaces Note: I am not against best practices that makes Collaboration, Testing and Integration easier

  Read the article

• Calculating the force of an impact?

  - by meds

  I'm trying to figure out a way to determine the force two objects collide in. I have two vectors defining their linear velocity at the time of impact, their mass and their angular velocity. Keep in mind this is all for a 2D physics engine. I don't think it's as simple as adding up these values and figuring out if it's large enogh it makes a large impact since that doesn't take into account if the two objects are travelling in the same direction (as an example). Any ideas?

  Read the article

• Lost connectivity after configuring multiple network adapters on separate networks

  - by Dave Long

  I am trying to setup an Ubuntu hosting server, currently just for development, and the server has two NICs, each sitting on a different network. eth0 is on 192.168.200.* and eth1 is on 192.168.101.* and each one has a static IP. eth0 is the public facing NIC card and eth1 is strictly for internal access to the server. I initially only setup eth0 and added the eth1 card when I needed it. eth0 was working find until I added eth1, now, can't get any connectivity on eth0 unless I pull eth1 out of the box. The configuration on each system is as follows: auto eth0 iface eth0 inet static address 192.168.200.94 netmask 255.255.255.0 network 192.168.200.0 broadcast 192.168.200.255 gateway 192.168.200.253 auto eth1 iface eth1 inet static address 192.168.101.64 netmask 255.255.255.0 network 192.168.101.0 broadcast 192.168.101.255 gateway 192.168.101.254 Again eth0 worked fine until I added eth1. I have seen this happen with Windows servers if you have a Default Gateway setup for both NICs, but I am not sure if this works the same on Ubuntu. My resolv.conf file looks like so: nameserver 192.168.101.59 nameserver 192.168.101.58 domain domain.local search domain.local Per request here is the Routing table 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 192.168.200.0 * 255.255.255.0 U 0 0 0 eth0 default 192.168.101.254 0.0.0.0 UG 100 0 0 eth1 default 192.168.200.253 0.0.0.0 UG 100 0 0 eth0

  Read the article

• ideas on multiplayer games which include lots of collaboration?

  - by user494461

  For my master thesis I wanted to design a small multiplayer game which includes more than one player(maybe 5), has 2-3 players collaborating at a time to achieve some task. The most important thing is realistic simulation of the movable objects in the scene which more than one player should simultaneously interact with. I would also prefer large virtual environments (VEs) like mmogs where groups of players are interacting in different areas of the VE. tasks for players should include 2-3 players touching movable objects at same time. e,g, a very basic task can be users lifting a cube together and pushing it through a hole I am not new to designing virtual environments with openGL, but have never designed games before and rarely play other than few of my favorite ones like Fifa. I wanted some ideas on what kind of games should I look at which should help me with ideas for my tasks for the users to gain points and win in games? any current indie games which might inspire me?

  Read the article

• Create many similar classes, or just one

  - by soandos

  The goal is to create an application that has objects that can represent some operations (add, subtract, etc). All of those objects will have common functions and members, and thus will either implement an interface or inherit from an abstract class (Which would be better practice, this will be in C# if that matters?). As far as I can see, there are two different ways of organizing all of these classes. I could create an addition class, a subtraction class, etc. This has the upside of being highly modular but the difference between classes is so minimal. I could create one class, and have a member that will say what type of operation is being represented. This means lots of switch statements, and losing some modularity, in addition to being harder to maintain. Which is is better practice? Is there a better way of doing that is not listed above? If it matters, the list of functions that should be supported is long.

  Read the article

• Problems bringing up a second virtual network interface

  - by tubaguy50035

  I'm having issues adding a second IP address to one interface. Below is my /etc/networking/interfaces # The loopback network interface auto lo iface lo inet loopback #eth0 is our main IP address auto eth0 iface eth0 inet static address 198.58.103.* netmask 255.255.255.0 gateway 198.58.103.1 #eth0:0 is our private address auto eth0:0 iface eth0:0 inet static address 192.168.129.134 netmask 255.255.128.0 #eth0:1 is for www.site.com auto eth0:1 iface eth0:1 inet static address 198.58.104.* netmask 255.255.255.0 gateway 198.58.104.1 When I run /etc/init.d/networking restart, I get a fail error about bringing up eth0:1: RTNETLINK answers: File exists Failed to bring up eth0:1. Any reason this would be? I didn't have any problems with I first set up eth0 and eth0:0.

  Read the article

• How to achieve 'forward' movement (into the screen) using Cocos2D?

  - by lemikegao

  I'm interested in creating a 2.5D first-person shooter (like Doom) and I currently don't understand how to implement the player moving forward. The player will also be able to browse around the world (left, right, up, down) via gyroscope control. I plan to only use 2D sprites and no 3D models. My first attempt was to increase the scale of layers to make it appear as if the player was moving toward the objects but I'm not sure how to make it seem as if the player is passing around the objects (instead of running into them). If there are extensions that I should take a look at (like Cocos3D), please let me know. Thanks for the help! Note: I've only created 2D games so was hoping to get guided into the right direction

  Read the article

• How to Create a DotNetNuke Skin Object from an OWS Configuration - 2 Videos

  In this tutorial we walk you through how to create and place Open Web Studio skin objects directly into your DotNetNuke skin. We cover how to create an OWS menu and feedback form and how to convert those modules into DNN Skin Objects. The videos contain: Video 1 - Building the New OWS Configuration and Creating the Menu System Video 2 - Placing the OWS Skin Object within the Skin File and Creating a Feedback Skin Object Total Time Length: 18minsDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• XNA Octree with batching

  - by Alex

  I'm integrating batching in my engine. However I'm using an octree which is auto generated around my scene. Now batching renders a hole group at ones while an octree sorts out which objects that should be rendered within the camera frustum, therefore dividing the group. Batching and octree doesn't go along very well, right? Problem: The way I see it I have two options, either create batch groups based on objects who are close to one another within the octree or I can rebuild the batching matrixbuffer for the instances visible each frame. Which approach should I go with or does there exist another solution?

  Read the article

• Blender 2.6: How to Merge the Pros of Meshes and Surfaces

  - by fridojet

  there are two interesting kinds of objects: Meshes and Surfaces. Each of them offers very cool features. Object Type Specific Features Nice Features of Surfaces: (for example) They're as scalable as vector graphics (really nice!) You can build winding things real simply. Nice Features of Meshes: (for example) You can build organic things really good using the Sculpt Mode and a graphic tablet. You can use some special things like Physics. My Question There are things for which Surfaces are better and things for which Meshes are better. But how can I use both the best features of Surfaces and the best features of Meshes on one object at once? For example: How can I use Physics (like on Meshes) on lossless scalable objects (like Surfaces)? Thanks.

  Read the article

• Do I lose/gain performance for discarding pixels even if I don't use depth testing?

  - by Gajoo

  When I first searched for discard instruction, I've found experts saying using discard will result in performance drain. They said discarding pixels will break GPU's ability to use zBuffer properly because GPU have to first run Fragment shader for both objects to check if the one nearer to camera is discarded or not. For a 2D game I'm currently working on, I've disabled both depth-test and depth-write. I'm drawing all objects sorted by their depth and that's all, no need for GPU to do fancy things. now I'm wondering is it still bad if I discard pixels in my fragment shader?

  Read the article

• Syncing properties across a game server

  - by Vaughan Hilts

  I'm beginning to implement a simple scripting system into my networked server, and I've hit a snag. Before, I've been wrapping my calls into functions on objects that manipulate objects, but lately I've been finding this to be a pain for simple things. For example, if I set 'player.HP = 1'.. this works server-side. But the player side never sees this change unless I explicitly send a packet to inform the client. For many things like map swapping that require more complicated changes, like change X, Y, Map and do this.. I have a function. That's fine. But what about these small properties I want to sync?

  Read the article

< Previous Page | 230 231 232 233 234 235 236 237 238 239 240 241  | Next Page >