Search Results

Search found 5908 results on 237 pages for 'cody short'.

Page 24/237 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• SATA errors reported during boot: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0

  - by digby280

  I have noticed some error during the Linux boot. They seem to continue to occur after the boot adding lines to the log every few seconds. Once booted this normally does not appear to be causing any problems. However, around 1 in 10 boots results in a kernel panic and the computer has on two or three occasions suddenly rebooted after being powered on for a number of hours. I presume the cause of the reboot is a kernel panic as well. I am running Ubuntu 11.10 and I have had Ubuntu installed on the computer for around a year. I have googled around and not found anything useful. I have provided the kernel log lines and the output of smartctl. Can anyone explain exactly what these errors mean, or better still how to resolve them? Apr 2 16:51:27 dell580 kernel: [ 19.831140] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:27 dell580 kernel: [ 19.934194] tg3 0000:03:00.0: eth0: Link is down Apr 2 16:51:28 dell580 kernel: [ 20.929468] tg3 0000:03:00.0: eth0: Link is up at 100 Mbps, full duplex Apr 2 16:51:28 dell580 kernel: [ 20.929471] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX Apr 2 16:51:28 dell580 kernel: [ 20.929727] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Apr 2 16:51:29 dell580 kernel: [ 21.609381] EXT4-fs (sdb2): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0 Apr 2 16:51:29 dell580 kernel: [ 21.616515] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:29 dell580 kernel: [ 21.616519] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:29 dell580 kernel: [ 21.616525] ata2.00: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 21.934036] ata2.01: hard resetting link Apr 2 16:51:29 dell580 kernel: [ 22.408890] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.408907] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:29 dell580 kernel: [ 22.440934] ata2.00: configured for UDMA/100 Apr 2 16:51:29 dell580 kernel: [ 22.449040] ata2.01: configured for UDMA/133 Apr 2 16:51:29 dell580 kernel: [ 22.449818] ata2: EH complete Apr 2 16:51:33 dell580 kernel: [ 26.122664] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:33 dell580 kernel: [ 26.122670] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:33 dell580 kernel: [ 26.122677] ata2.00: hard resetting link Apr 2 16:51:33 dell580 kernel: [ 26.442684] ata2.01: hard resetting link Apr 2 16:51:34 dell580 kernel: [ 26.925545] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.925561] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:34 dell580 kernel: [ 26.961542] ata2.00: configured for UDMA/100 Apr 2 16:51:34 dell580 kernel: [ 26.969616] ata2.01: configured for UDMA/133 Apr 2 16:51:34 dell580 kernel: [ 26.970400] ata2: EH complete Apr 2 16:51:35 dell580 kernel: [ 28.111180] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:35 dell580 kernel: [ 28.111184] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:35 dell580 kernel: [ 28.111191] ata2.00: hard resetting link Apr 2 16:51:35 dell580 kernel: [ 28.429674] ata2.01: hard resetting link Apr 2 16:51:36 dell580 kernel: [ 28.904557] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.904572] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:36 dell580 kernel: [ 28.936609] ata2.00: configured for UDMA/100 Apr 2 16:51:36 dell580 kernel: [ 28.944692] ata2.01: configured for UDMA/133 Apr 2 16:51:36 dell580 kernel: [ 28.945464] ata2: EH complete Apr 2 16:51:38 dell580 kernel: [ 31.581756] eth0: no IPv6 routers present Apr 2 16:51:38 dell580 kernel: [ 32.103066] ata2.01: exception Emask 0x40 SAct 0x0 SErr 0x80800 action 0x0 Apr 2 16:51:38 dell580 kernel: [ 32.103074] ata2.01: SError: { HostInt 10B8B } Apr 2 16:51:38 dell580 kernel: [ 32.103085] ata2.00: hard resetting link Apr 2 16:51:38 dell580 kernel: [ 32.419669] ata2.01: hard resetting link Apr 2 16:51:39 dell580 kernel: [ 32.894518] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.894533] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 2 16:51:39 dell580 kernel: [ 32.926536] ata2.00: configured for UDMA/100 Apr 2 16:51:39 dell580 kernel: [ 32.934715] ata2.01: configured for UDMA/133 Apr 2 16:51:39 dell580 kernel: [ 32.935578] ata2: EH complete Here's the output of smartctl for the drive. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-17-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SAMSUNG SpinPoint F1 DT Device Model: SAMSUNG HD103UJ Serial Number: S13PJ90QC19706 LU WWN Device Id: 5 0000f0 00b1c7960 Firmware Version: 1AA01113 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 3b Local Time is: Mon Apr 2 17:13:48 2012 BST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 41) The self-test routine was interrupted by the host with a hard or soft reset. Total time to complete Offline data collection: (11772) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 197) minutes. Conveyance self-test routine recommended polling time: ( 21) minutes. SCT capabilities: (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0007 076 076 011 Pre-fail Always - 7940 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 521 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0 8 Seek_Time_Performance 0x0025 100 100 015 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 642 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 482 13 Read_Soft_Error_Rate 0x000e 100 100 000 Old_age Always - 0 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 759 184 End-to-End_Error 0x0033 100 100 000 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 073 069 000 Old_age Always - 27 (Min/Max 16/27) 194 Temperature_Celsius 0x0022 073 067 000 Old_age Always - 27 (Min/Max 16/28) 195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 320028 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 099 099 000 Old_age Always - 1494 200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always - 0 201 Soft_Read_Error_Rate 0x000a 253 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 211 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 211 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 0f 31 63 8f e1 Error: ICRC, ABRT 15 sectors at LBA = 0x018f6331 = 26174257 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 40 62 8f e1 08 00:01:00.460 READ DMA c8 00 20 00 7c 30 e0 08 00:01:00.450 READ DMA c8 00 00 10 49 8f e1 08 00:01:00.440 READ DMA c8 00 e0 20 d0 30 e0 08 00:01:00.420 READ DMA c8 00 00 c0 59 90 e1 08 00:01:00.400 READ DMA Error 210 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf e9 cf 66 e0 Error: ICRC, ABRT 207 sectors at LBA = 0x0066cfe9 = 6737897 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 b8 cf 66 e0 08 00:08:29.780 READ DMA c8 00 60 60 c9 18 e0 08 00:08:29.770 READ DMA c8 00 40 20 c9 18 e0 08 00:08:29.770 READ DMA c8 00 20 00 c9 18 e0 08 00:08:29.760 READ DMA c8 00 20 98 cf 66 e0 08 00:08:29.750 READ DMA Error 209 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 2f d1 74 e0 e0 Error: ICRC, ABRT 47 sectors at LBA = 0x00e074d1 = 14709969 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 00 00 74 e0 e0 08 00:00:30.940 READ DMA c8 00 20 18 36 de e0 08 00:00:30.930 READ DMA c8 00 08 48 f1 dd e0 08 00:00:30.930 READ DMA c8 00 08 a8 f0 dd e0 08 00:00:30.930 READ DMA c8 00 08 90 f0 dd e0 08 00:00:30.930 READ DMA Error 208 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 7f 21 88 9d e0 Error: ICRC, ABRT 127 sectors at LBA = 0x009d8821 = 10324001 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 a0 00 88 9d e0 08 00:00:27.610 READ DMA c8 00 58 a8 e7 9c e0 08 00:00:27.610 READ DMA c8 00 00 28 e6 9c e0 08 00:00:27.610 READ DMA c8 00 00 e0 e4 9c e0 08 00:00:27.610 READ DMA c8 00 00 90 e0 9c e0 08 00:00:27.600 READ DMA Error 207 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 04 51 26 6a 6a c3 e0 Error: ABRT at LBA = 0x00c36a6a = 12806762 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- ca 00 00 90 69 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 68 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 50 65 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 d0 64 c3 e0 08 00:29:39.350 WRITE DMA ca 00 40 90 63 c3 e0 08 00:29:39.350 WRITE DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Interrupted (host reset) 90% 638 - # 2 Short offline Interrupted (host reset) 90% 638 - # 3 Extended offline Interrupted (host reset) 90% 638 - # 4 Short offline Interrupted (host reset) 90% 638 - # 5 Extended offline Interrupted (host reset) 90% 638 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• OWB/ODI Users: Last Chance to Submit and Vote On Sessions for OpenWorld 2010

  - by antonio romero

  Now is the last chance for OWB and ODI users to propose new ETL/DW/DI sessions for OpenWorld! Oracle OpenWorld 2010 "Suggest a Session" lets members of the Oracle Mix community submit and vote on papers/talks for OpenWorld. The most popular session proposals will be included in the conference program. One promising OWB-related topic has already been submitted: Case Study: Real-Time Data Warehousing and Fraud Detection with Oracle 11gR2 Dr. Holger Friedrich and consultants from sumIT AG in Switzerland built a real-time data warehouse and accompanying BI system for real-time online fraud detection with very limited resources and a short schedule. His presentation will cover: How sumIT AG efficiently loads complex data feeds in real time in Oracle 11gR2 using, among others, Advanced Queues and XML DB How they lowered costs and sped up development, by leveraging the DBs development features including Oracle Warehouse Builder How they delivered a production-ready solution in a few short months using only three part-time developers Come vote for this proposal, on Oracle Mix: https://mix.oracle.com/oow10/proposals/10566-case-study-real-time-data-warehousing-and-fraud-detection-with-oracle-11gr2  I have already invited members of the OWB/ODI Linkedin group (with over 1400 members) to come vote on topics like this one and propose their own. If enough of us vote on a few topics, we are sure to get some on the agenda!  And if you have your own topics, using the Suggest-a-Session instructions here: http://wiki.oracle.com/page/Oracle+OpenWorld+2010+Suggest-a-Session If you propose a topic, don't forget to come to Linkedin and promote it! I have already sent the members of the Linkedin group an email announcement about this, and I will send another in a week, with links to all topics submitted. Thanks, all!

  Read the article

• Record management system java web framework

  - by Kamil Tomšík

  We're currently reconsidering technologies and frameworks to get more agile with "simple" RMS CRUD-based projects. In short, short-living things like this Right now we have a custom extension on top of SmartGWT but after some time it has proven not to be flexible enough. I also personally dislike the java-js compilation process and the whole GWT codebase. Not only is the design ugly, it also makes certain low-level js things very complicated if not completely impossible. So what I'm looking for is: closest to web as possible, like JSF or possibly Tapestry, it is very important to be able get "low" and weave framework if necessary. Happens more often than we thought. datagrid capable - Ext.js & PrimeFaces looks pretty good, Vaadin does too. db-schema generators (optional, no matter in which way) If it were only on me, I'd probably stick to Ext.js + custom rest-based java solution, possibly generated from database schema (not sure about concrete tooling yet). I only have experience with vanilla Ext.js, vanilla GWT and JSF 2.0 / Seam, so it hard for me to judge or even propose other frameworks. What would be your proposition? What are the problems you've faced? What was your solution and how hard do you think it was to deal with them in "big picture"?

  Read the article

• RMS java web framework

  - by Kamil Tomšík

  We're currently reconsidering technologies and frameworks to get more agile with "simple" RMS CRUD-based projects. In short, short-living things like this Right now we have custom extension on top of SmartGWT but after some time it has proven not to be enough flexible. I also personally dislike that java-js compilation process and the whole GWT codebase. Not only its ugly designed, it also makes certain low-level js things very complicated if not completely impossible. So what I'm looking for is: closest to web as possible, like JSF or possibly Tapestry, it is very important to be able get "low" and weave framework if necessary. Happens more often than we thought. datagrid capable - Ext.js & PrimeFaces looks pretty good, Vaadin does too. db-schema generators (optional, no matter in which way) If it were only on me, I'd probably stick to Ext.js + custom rest-based java solution, possibly generated from database schema (not sure about concrete tooling yet) I only does have experience with vanilla Ext.js, vanilla GWT and JSF 2.0 / Seam, so it kinda hard for me to judge or even propose other frameworks. What would be your proposition? What are the problems you've faced, what was your solution and how hard do you think it was to deal with them in "big picture"?

  Read the article

• SSDT gotcha – Moving a file erases code analysis suppressions

  - by jamiet

  I discovered a little wrinkle in SSDT today that is worth knowing about if you are managing your database schemas using SSDT. In short, if a file is moved to a different folder in the project then any code analysis suppressions that reference that file will disappear from the suppression file. This makes sense if you think about it because the paths stored in the suppression file are no longer valid, but you probably won’t be aware of it until it happens to you. If you don’t know what code analysis is or you don’t know what the suppression file is then you can probably stop reading now, otherwise read on for a simple short demo. Let’s create a new project and add a stored procedure to it called sp_dummy. Naming stored procedures with a sp_ prefix is generally frowned upon and hence SSDT static code analysis will look for occurrences of this and flag them. So, the next thing we need to do is turn on static code analysis in the project properties: A subsequent build causes a code analysis warning as we might expect: Let’s suppose we actually don’t mind stored procedures with sp_ prefixes, we can just right-click on the message to suppress and get rid of it: That causes a suppression file to get created in our project: Notice that the suppression file contains a relative path to the file that has had the suppression placed upon it. Now if we simply move the file within our project to a new folder notice that the suppression that we just created gets removed from the suppression file: As I alluded above this behaviour is intuitive because the path originally stored in the suppression file is no longer relevant but you’re probably not going to be aware of it until it happens to you and messages that you thought you had suppressed start appearing again. Definitely one to be aware of. @Jamiet   

  Read the article

• Remap keyboard Ubuntu 12.04; Asus Q500A

  - by hydroxide

  I have an Asus Q500A with win8 and Ubuntu 12.04 64 bit; linux kernel 3.8.0-32-generic. I am using gnome-panel, and xserver-xorg-lts-raring. I have been experiencing problems with the keyboard short-cuts since I had a fresh install. fn+f10 is supposed to mute my system, but instead it will repeatedly press d. fn+f11 is volume down, but it presses c. fn+f12 is volume up, presses b repeatedly. Most of the other on-board short-cuts such as adjusting screen and led brightness work most of the time, but sometimes press other letters repeatedly. Also, sometimes my cntr gets held down for no reason. Everything works fine in windows. I have tried installing all recommends and sudo dpkg-reconfigure -a to reconfigure all packages, which did not solve my problem. I have tried using KeyTouch editor to edit keymaps, navigating to /usr/shar/x11/xkb/keymap when I try opening any of these files it says file contains no keyboard element. I think If I were just able to remap my keyboard it might solve my issues, otherwise if anyone knows where I can get asus drivers for 12.04 please let me know Apparently I didn't have all repositories enabled. I executed the following commands and am trying the updates they give me. Getting linux_kernel 3.8.0-33 generic as well as a bunch of other packages. sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) universe" sudo add-apt-repository "deb http://archive.ubuntu.com/ubuntu $(lsb_release -sc) main universe restricted multiverse" sudo add-apt-repository "deb http://archive.canonical.com/ubuntu $(lsb_release -sc) partner"

  Read the article

• Podcast Show Notes: Conversations in the Cloud

  - by Bob Rhubart

  The centerpiece of every OTN Architect Day event is a panel discussion the gathers all of the session speakers togehter to respond to questions from the audience. I generally try to record these discussions, usually by stiking my iPad on top of one of the PA speakers, with mixed results. Fortunately, the A/V tech at the venue for the Los Angeles event, held on October 25, 2012, had the necessary gear to get a good-quality recording of the panel discussion. So starting this week the OTN ArchBeat Podcast will feature a short series of highlights from those discussions. Listen to Part 1: Dude, What's My Role? Members of the Architect Day panel respond to an audience question about what happens to traditional IT roles in a cloud environment. Listen to Part 2: Migrating Mission-Critical Applications to the Cloud (Nov 21) The panel offers advice and examples in response to an audience question about dealing with mission-critical applications. Listen to Part 3: All Clouds Are Not Equal (Nov 28) The panel responds to a challenging question about cloud strategy with a discussion of enterprise-grade cloud services. Listen to Part 4: Cloud Security and Auditing (Dec 5) The last segment in the series is short discussion in response to an audience question about auditing and security in the cloud. The Panelists (Listed alphabetically) Ashok Aletty, Senior Director of Product Management, Oracle Cloud Application Foundation Dr. James Baty, Vice President, Oracle Global Enterprise Architecture Program Dave Chappelle, Enterprise Architect, Oracle Global Enterprise Architecture Program Jeff Davies, Senior Principal Product Manager, Oracle Corporation Anbu Krishnaswamy, Enterprise Architect, Oracle Global Enterprise Architecture Program Dhanraj Pondicherry, Sales Consulting Manager, Oracle Exadata Perren Walker, Senior Principal Product Manager, Oracle Enterprise Manager Coming Soon Upcoming programs will focus on DevOps and Continuous Integration, and on Oracle's Java Cloud and Developer Cloud services. Stay tuned: RSS

  Read the article

• The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques

  The effects of Agile Programming can alter the five desirable properties of modeling tools and techniques as documented by Pfleeger. The agile methodology does promote human understanding and communication through the use of short iterative software development life cycles which forces stakeholders to review the project and adjust the project for any requirement changes.  Due to the consistent evaluations of a project and requirements, process are continually being refined, upgraded, and compared against other alternatives to ensure the best design delivered to the client. Due to the short repetitive development cycles, increased time is devoted to process management due to the fact that requirements and designs could be constantly changing. This requires additional forecasting, monitoring, and planning for each iteration. Because things can change so rapidly, automated guidance in performing process must be updated for each iteration because the environment and the available reusable process could change. In addition, the original guidance and suggestions for the project also need to be updated to account for these changes as well.   In essence the automation of process execution is supported by the agile methodology because during every iteration all processes must be tested, evaluated to ensure process integrity and compliance with the customer’s requirements. I do not think the agile approach diminishes modeling, in fact I think it increases the modeling because before the start of every development cycle, modeling must be checked for accuracy based on the changed requirements. So in essence the reduced time spent initially designing the models is in fact gained as the project completes every iteration of the project.

  Read the article

• Struggling with the Single Responsibility Principle

  - by AngryBird

  Consider this example: I have a website. It allows users to make posts (can be anything) and add tags that describe the post. In the code, I have two classes that represent the post and tags. Lets call these classes Post and Tag. Post takes care of creating posts, deleting posts, updating posts, etc. Tag takes care of creating tags, deleting tags, updating tags, etc. There is one operation that is missing. The linking of tags to posts. I am struggling with who should do this operation. It could fit equally well in either class. On one hand, the Post class could have a function that takes a Tag as a parameter, and then stores it in a list of tags. On the other hand, the Tag class could have a function that takes a Post as a parameter and links the Tag to the Post. The above is just an example of my problem. I am actually running into this with multiple classes that are all similar. It could fit equally well in both. Short of actually putting the functionality in both classes, what conventions or design styles exist to help me solve this problem. I am assuming there has to be something short of just picking one? Maybe putting it in both classes is the correct answer?

  Read the article

• Wordpress .htaccess preventing subfolder access

  - by John K.

  This is sort of a goofy setup, but it's not in my power to reconfigure it at this time. I'm running in a shared hosting environment. The domain is example.com. This is an add-on domain on the host side with example.com being redirected to the www/example.com sub-directory. That directory houses a standard Wordpress site which acts as the main site when you visit example.com. The .htaccess file within that directory is: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteRule ^wp-admin/profile\.php$ /ssm/welcome [R] </IfModule> I have a subdirectory, at the root level with the /example.com subdirectory that houses a cake php application. That subdirectory is /tracker. My problem is that when I attempt to browse to example.com/tracker, I get a 404 from Wordpress because perma links are on. What I think I need is a rewrite rule in the Wordpress .htaccess file that short circuits the existing rewrite rules and permits example.com/tracker to work independently of the Wordpress install. Or a rewrite rule at the root level that short circuits the redirect to the /example.com directory in the first place. Not sure how well I explained that so here's a summary. The www/ directory structure: example.com/ tracker/ Add on domain of www.example.com redirecting to the /example.com directory with Wordpress and a tracker/ directory running CakePHP which I would like to access via www.example.com/tracker. If you need further info or clarification let me know!

  Read the article

• Wanted: Java Code Brainteasers

  - by Tori Wieldt

  The Jan/Feb Java Magazine will go out next week. It's full of great Java stories, interviews and technical articles. It also includes a Fix This section; the idea of this section is challenging a Java developer's coding skills. It's a multiple-choice brainteaser that includes code and possible answers. The answer is provided in the next issue. For an example, check out Fix This in the Java Magazine premier issue. We are looking for community submissions to Fix This. Do you have a good code brain teaser? Remember, you want tease your fellow devs, not stump them completely! If you have a submission, here's what you do:  1. State the problem, including a short summary of the tool/technique, in about 75 words. 2. Send us the code snippet, with a short set-up so readers know what they are looking at (such as, "Consider the following piece of code to have database access within a Servlet.") 3. Provide four multiple-choice answers to the question, "What's the fix?" 4. Give us the answer, along with a brief explanation of why. 5. Tell us who you are (name, occupation, etc.) 6. Email the above to JAVAMAG_US at ORACLE.COM with "Fix This Submission" in the title. Deadlines for Fix This for next two issues of Java Magazine are Dec. 12th and Jan. 15th. Bring It!

  Read the article

• Writing Acceptance test cases

  - by HH_

  We are integrating a testing process in our SCRUM process. My new role is to write acceptance tests of our web applications in order to automate them later. I have read a lot about how tests cases should be written, but none gave me practical advices to write test cases for complex web applications, and instead they threw conflicting principles that I found hard to apply: Test cases should be short: Take the example of a CMS. Short test cases are easy to maintain and to identify the inputs and outputs. But what if I want to test a long series of operations (eg. adding a document, sending a notification to another user, the other user replies, the document changes state, the user gets a notice). It rather seems to me that test cases should represent complete scenarios. But I can see how this will produce overtly complex test documents. Tests should identify inputs and outputs:: What if I have a long form with many interacting fields, with different behaviors. Do I write one test for everything, or one for each? Test cases should be independent: But how can I apply that if testing the upload operation requires that the connect operation is successful? And how does it apply to writing test cases? Should I write a test for each operation, but each test declares its dependencies, or should I rewrite the whole scenario for each test? Test cases should be lightly-documented: This principles is specific to Agile projects. So do you have any advice on how to implement this principle? Although I thought that writing acceptance test cases was going to be simple, I found myself overwhelmed by every decision I had to make (FYI: I am a developer and not a professional tester). So my main question is: What steps or advices do you have in order to write maintainable acceptance test cases for complex applications. Thank you.

  Read the article

• Android - Efficient way to draw tiles in OpenGL ES

  - by Maecky

  Hi, I am trying to write efficient code to render a tile based map in android. I load for each tile the corresponding bitmap (just one time) and then create the according tiles. I have designed a class to do this: public class VertexQuad { private float[] mCoordArr; private float[] mColArr; private float[] mTexCoordArr; private int mTextureName; private static short mCounter = 0; private short mIndex; As you can see, each tile has it's x,y location, a color array, texture coordinates and a texture name. Now, I want to render all my created tiles. To reduce the openGL api calls (I read somewhere that the state changes are costly and therefore I want to keep them to a minimum), I first want to hand ALL the coordinate-arrays, color-arrays and texture-coordinates over to OpenGL. After that I run two for loops. The first one iterates over the textures and binds the texture. The second for loop iterates over all Tiles and puts all tiles with the corresponding texture into an IndexBuffer. After the second for loop has finished, I call gl.gl_drawElements() whith the corresponding index buffer, to draw all tiles with the texture associated. For the next texture I do the same again. Now I run into some problems: Allocating and filling the FloatBuffers at the start of each rendering cycle costs very much time. I just run a test, where i wanted to put 400 coordinates into a FloatBuffer which took me about 200ms. My questions now are: Is there a better way, handling the coordinate and color structures? How is this correctly done, this is obviously not the optimal way? ;) thanks in advance, regards Markus

  Read the article

• Mobile Web Applications – A guide for professional development

  - by JuergenKress

  (Tobias Bosch, Stefan Scheidt, Torsten Winterberg / Opitz Consulting Deutschland GmbH). There is a real hype around mobile solutions. Smartphones and tablets are everywhere. Frontend architecture is changing quickly to adopt cross browser technologies like HTML5 and extensive JavaScript-based development. In this book we introduce our software development process to build test-driven Single-Page JavaScript Web Applications, which will be the future next to native apps. We start with a short introduction of our RYLC showcase (know from our SOA articles), give a very short introduction to JavaScript, then talk about jQuery Mobile, Angular JS, Testing, Backend-communication and we close with deploying our RYLC-Webapp as a hybrid app using the PhoneGap (Cordova) framework. Don’t expect too much theory – it’s a practical guide explaining how RYLC Web App was built, to kickstart your own development. Currently only available in German as paperback and eBook. WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. BlogTwitterLinkedInMixForumWiki Technorati Tags: adf mobil

  Read the article

• Why is LSHW Only listing one of my two HDDs?

  - by Mark

  I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

  Read the article

• OpenGL - Rendering from part of an index and vertex array depending on an element count

  - by user1423893

  I'm currently drawing my shapes as lines by using a VAO and then assigning the dynamic vertices and indices each frame. // Bind VAO glBindVertexArray(m_vao); // Update the vertex buffer with the new data (Copy data into the vertex buffer object) glBufferData(GL_ARRAY_BUFFER, numVertices * sizeof(VertexPosition), m_vertices.data(), GL_DYNAMIC_DRAW); // Update the index buffer with the new data (Copy data into the index buffer object) glBufferData(GL_ELEMENT_ARRAY_BUFFER, numIndices * sizeof(unsigned short), indices.data(), GL_DYNAMIC_DRAW); glDrawElements(GL_LINES, numIndices, GL_UNSIGNED_SHORT, BUFFER_OFFSET(0)); // Unbind VAO glBindVertexArray(0); What I would like to do is draw the lines using only part of the data stored in the index and vertex buffer objects. The vertex buffer has its vertices set from an array of defined maximum size: std::array<VertexPosition, maxVertices> m_vertices; The index buffer has its elements set from an array of defined maximum size: std::array<unsigned short, maxIndices> indices = { 0 }; A running total is kept of the number of vertices and indices needed for each draw call numVertices numIndices Can I not specify that the buffer data contain the entire array and only read from part of it when drawing? For example using the vertex buffer object glBufferData(GL_ARRAY_BUFFER, numVertices * sizeof(VertexPosition), m_vertices.data(), GL_DYNAMIC_DRAW); m_vertices.data() = Entire array is stored numVertices * sizeof(VertexPosition) = Amount of data to read from the entire array Is this not the correct way to approach this? I do not wish to use std::vector if possible.

  Read the article

• Working as a contractor--questions part II

  - by universe_hacker

  This is a follow-up to this discussion: Working as a contractor--questions I still would like to get more info on the following points, when working as a contractor as opposed to direct employee: Housing: for short-term contracts (let's say 6 months or less) that are not in your home area, where and how do you search for short-term, flexible housing? Especially since an employer would typically want you to start immediately, so you don't have the time to go out and explore. Also, would you typically look for furnished apartments because the cost transporting your own furniture for a few months is not justified? Work hours and pay: are contractors more strictly supervised (as far as getting specified work done) because they get paid by the hour? There are also supposed to get overtime pay (at a higher rate) if they work more than 40 hours per week, does this really happen? Or do they work unpaid extra hours just like many regular employees? Some potential employers have mentioned paying the "per diem", which is essentially a non-taxable daily allowance, which is supposed to be used for living expenses. This money gets subtracted from you per-hour rate, but the advantage is that you pay less tax. However, from the information I have seen, the per diem can only be paid if you maintain a "permanent" residence you intend to return to. Is this checked in practice, and if yes, how?

  Read the article

• Getting file system free space

  - by Fred Riley

  This isn't a problem as such, more a request for information based on ignorance of the Linux filesystem. The very short question is: How do I find out how much free and used space there is on the volume from which Ubuntu is running? More detail: I'm running Ubuntu 12.04 from a 64Gb USB3 stick, created from booting up a year-old Ubuntu 12.04 DVD and running Startup Disk Creator. The reason for this is that the Master Boot Record on my hard disk, holding Windoze 7, has gone belly-up, and whilst awaiting a recovery disk I'm running Ubunto off USB or DVD as a 'trial'. (And will continue to run Ubuntu after restoring Windoze, as I've rediscovered my love of the penguin :o)) After installing Ubuntu on the stick I ran the software update app, which downloaded some 450Mb of updates and took a couple of hours to install to the stick. A couple of times I got a message saying that disk space was short. So I looked in the file manager (or whatever it's called these days) and couldn't see the stick listed, just: SYSTEM hard disk (listed as 479Gb Filesystem) two other partitions that had been created by Windoze "4.3GB Filesystem" which when I try to open gives the error "Could not find /cow", and when I try to unmount it tells me I can't because it's not mounted - D'OH!! Edit: screenshot of file manager Edit: screenshot of low disk space warning What I can't see is the USB stick from which I'm running Ubuntu. Where's it gone, anybody know? This is tangentially related to a previous question of mine about system tools, in that I'm trying to get control and knowledge of the system in the newest incarnation of Ubuntu.

  Read the article

• What's hot in Oracle Premier Support News for Solaris, Storage and Systems - How to Patch!

  - by user12244613

  Struggling with locating patches for Sun products? Can't find your Oracle System Drivers? This question has been raised many times by customers and was the source of a short video in the Oracle System Support Newsletter in February 2012. The transition between SunSolve and My Oracle Support is to change how you think about the type of patch your looking for. For example, in SunSolve you might have typed e1000g if looking for an Enternet Driver.. but entering e1000g will not find anything in My Oracle Support - Patches and Update Menu. As you need to use the Product (Advanced) search which is driven of the Product Name, therefore you need to type "Ethernet" and select the ethernet product you are looking for to locate the patches for this product. Just to recap that video: If you are looking for the e1000g Ethernet Driver - You need to use Advance Search and search for Enternet 1. Log into My Oracle Support - Select Patches and Updates - Select Product or Family (Advanced Search). 2. In the product line enter: Ethernet and select the product name from the menu. 3. Check remove supersede patches - that ensure you only get relevant current patches in the results. 4. Select Search and the results are displayed. Now you have more options to include the platform (Solaris,Linux etc.) if want to further narrow the search. Need more information? Log into My Oracle Support and what a short 90sec video I put together. View the 7 minute Video using Firefox/chrome – It shows searching for individual patches, Solaris, Firmware etc. If you are not receiving the Oracle System Support Newsletter: Option (a) Within My Oracle Support, make document id: 1363390.1 a favourite and revisit it on the 2nd of each month for the latest content. Option (b) By default the Newsletter  is sent to all customers who have logged a Service Request on an Oracle Systems Hardware Product during the last 12months, unless you have opted out to receiving Oracle Communications on your profile on http://oracle.com

  Read the article

• Making The EBS Upgrade From 11.5.10 Easier - Part II

  - by Annemarie Provisero

  ADVISOR WEBCAST: Making The EBS Upgrade From 11.5.10 Easier - Part II PRODUCT FAMILY: E-Business Suite July 12, 2011 at 8 am PT, 9 am MT, 11 am ET This one-hour session is recommended for technical users who are responsible for upgrading their E-Business Suite applications from Release 11.5.10 to Release 12.1.x. As you begin your upgrade process, there are a number of tools available to assist you in a successful upgrade. A successful upgrade requires careful planning, correct upgrade processing, detailed testing, and user (re)training prior to upgrade. Over three sessions we will discuss the tools that you can use to assist in your upgrade tasks. These tools are available to you via My Oracle Support and as part of the E-Business Suite product offerings. In In this second session, we’ll cover the following topics: Recap of Part I Detailed Look at Maintenance Wizard Detailed Look at Patch Wizard A short, live demonstration and question and answer period will be included. In the first part of the three-session series, we covered the following topics: Overview of Tools Available for Upgrading Upgrade versus Re-implementing Upgrade Community Upgrade Product Information Center Page Detailed Look at Upgrade Advisor A replay of that session is available via Note 740964.1,  Advisor Webcast Archive. A third session will be presented on July 19, 2011 to review best practices for using the upgrade tools. A short, live demonstration (only if applicable) and question and answer period will be included. Oracle Advisor Webcasts are dedicated to building your awareness around our products and services. This session does not replace offerings from Oracle Global Support Services. Click here to register for this session ------------------------------------------------------------------------------------------------------------- The above webcast is a service of the E-Business Suite Communities in My Oracle Support. For more information on other webcasts, please reference the Oracle Advisor Webcast Schedule.Click here to visit the E-Business Communities in My Oracle Support Note that all links require access to My Oracle Support.

  Read the article

• Content light website and Google - Tell google it's a listings site (as opposed shop, reviews or restaurants)

  - by Doug Firr

  I have a listings style website. Due to the nature of this (listings) the site is content light. Each page is typically less that 50 words but there are many pages. The site in question has had a ton of media coverage and so has some great inbound links from places like Wired, Fast Company, Canada Broadcasting Corporation and many many other bloggers, media websites and recycle related niche authors (It's a recycling site). But Google really ignores it. Traffic from search is very very low - less than 5% of all traffic. I know that using markup you can tell Google whether your site is a restaurant, article, review, shop, local business and a few other categories (https://www.google.com/webmasters/markup-helper/u/0/). Is there a way to tell Google that my site is a listings site? I suspect, but do not know for sure, that part of the problem is that Google simply does not know what my site is? It's a crowdmap where people post curbalerts. The information is useful to people but it is presented in a short, concise way - a pin on a map, a picture and a short description. Adding anything further is not necessary for the site's intended purpose. 1st question - how best to tell the search engines what y site is - listings and not some spammy website? Any recommendations in improving our site's Search presence? You can take a look here if interested: http://tinyurl.com/lxg4hn7

  Read the article

• Autocorrelation returns random results with mic input (using a high pass filter)

  - by Niall

  Hello, Sorry to ask a similar question to the one i asked before (FFT Problem (Returns random results)), but i've looked up pitch detection and autocorrelation and have found some code for pitch detection using autocorrelation. Im trying to do pitch detection of a users singing. Problem is, it keeps returning random results. I've got some code from http://code.google.com/p/yaalp/ which i've converted to C++ and modified (below). My sample rate is 2048, and data size is 1024. I'm detecting pitch of both a sine wave and mic input. The frequency of the sine wave is 726.0, and its detecting it to be 722.950820 (which im ok with), but its detecting the pitch of the mic as a random number from around 100 to around 1050. I'm now using a High pass filter to remove the DC offset, but it's not working. Am i doing it right, and if so, what else can i do to fix it? Any help would be greatly appreciated! double* doHighPassFilter(short *buffer) { // Do FFT: int bufferLength = 1024; float *real = malloc(bufferLength*sizeof(float)); float *real2 = malloc(bufferLength*sizeof(float)); for(int x=0;x<bufferLength;x++) { real[x] = buffer[x]; } fft(real, bufferLength); for(int x=0;x<bufferLength;x+=2) { real2[x] = real[x]; } for (int i=0; i < 30; i++) //Set freqs lower than 30hz to zero to attenuate the low frequencies real2[i] = 0; // Do inverse FFT: inversefft(real2,bufferLength); double* real3 = (double*)real2; return real3; } double DetectPitch(short* data) { int sampleRate = 2048; //Create sine wave double *buffer = malloc(1024*sizeof(short)); double amplitude = 0.25 * 32768; //0.25 * max length of short double frequency = 726.0; for (int n = 0; n < 1024; n++) { buffer[n] = (short)(amplitude * sin((2 * 3.14159265 * n * frequency) / sampleRate)); } doHighPassFilter(data); printf("Pitch from sine wave: %f\n",detectPitchCalculation(buffer, 50.0, 1000.0, 1, 1)); printf("Pitch from mic: %f\n",detectPitchCalculation(data, 50.0, 1000.0, 1, 1)); return 0; } // These work by shifting the signal until it seems to correlate with itself. // In other words if the signal looks very similar to (signal shifted 200 data) than the fundamental period is probably 200 data // Note that the algorithm only works well when there's only one prominent fundamental. // This could be optimized by looking at the rate of change to determine a maximum without testing all periods. double detectPitchCalculation(double* data, double minHz, double maxHz, int nCandidates, int nResolution) { //-------------------------1-------------------------// // note that higher frequency means lower period int nLowPeriodInSamples = hzToPeriodInSamples(maxHz, 2048); int nHiPeriodInSamples = hzToPeriodInSamples(minHz, 2048); if (nHiPeriodInSamples <= nLowPeriodInSamples) printf("Bad range for pitch detection."); if (1024 < nHiPeriodInSamples) printf("Not enough data."); double *results = new double[nHiPeriodInSamples - nLowPeriodInSamples]; //-------------------------2-------------------------// for (int period = nLowPeriodInSamples; period < nHiPeriodInSamples; period += nResolution) { double sum = 0; // for each sample, find correlation. (If they are far apart, small) for (int i = 0; i < 1024 - period; i++) sum += data[i] * data[i + period]; double mean = sum / 1024.0; results[period - nLowPeriodInSamples] = mean; } //-------------------------3-------------------------// // find the best indices int *bestIndices = findBestCandidates(nCandidates, results, nHiPeriodInSamples - nLowPeriodInSamples - 1); //note findBestCandidates modifies parameter // convert back to Hz double *res = new double[nCandidates]; for (int i=0; i < nCandidates;i++) res[i] = periodInSamplesToHz(bestIndices[i]+nLowPeriodInSamples, 2048); double pitch2 = res[0]; free(res); free(results); return pitch2; } /// Finds n "best" values from an array. Returns the indices of the best parts. /// (One way to do this would be to sort the array, but that could take too long. /// Warning: Changes the contents of the array!!! Do not use result array afterwards. int* findBestCandidates(int n, double* inputs,int length) { //int length = inputs.Length; if (length < n) printf("Length of inputs is not long enough."); int *res = new int[n]; double minValue = 0; for (int c = 0; c < n; c++) { // find the highest. double fBestValue = minValue; int nBestIndex = -1; for (int i = 0; i < length; i++) { if (inputs[i] > fBestValue) { nBestIndex = i; fBestValue = inputs[i]; } } // record this highest value res[c] = nBestIndex; // now blank out that index. if(nBestIndex!=-1) inputs[nBestIndex] = minValue; } return res; } int hzToPeriodInSamples(double hz, int sampleRate) { return (int)(1 / (hz / (double)sampleRate)); } double periodInSamplesToHz(int period, int sampleRate) { return 1 / (period / (double)sampleRate); } Thanks, Niall. Edit: Changed the code to implement a high pass filter with a cutoff of 30hz (from What Are High-Pass and Low-Pass Filters?, can anyone tell me how to convert the low-pass filter using convolution to a high-pass one?) but it's still returning random results. Plugging it into a VST host and using VST plugins to compare spectrums isn't an option to me unfortunately.

  Read the article

• Auto DOP and Concurrency

  - by jean-pierre.dijcks

  After spending some time in the cloud, I figured it is time to come down to earth and start discussing some of the new Auto DOP features some more. As Database Machines (the v2 machine runs Oracle Database 11.2) are effectively selling like hotcakes, it makes some sense to talk about the new parallel features in more detail. For basic understanding make sure you have read the initial post. The focus there is on Auto DOP and queuing, which is to some extend the focus here. But now I want to discuss the concurrency a little and explain some of the relevant parameters and their impact, specifically in a situation with concurrency on the system. The goal of Auto DOP The idea behind calculating the Automatic Degree of Parallelism is to find the highest possible DOP (ideal DOP) that still scales. In other words, if we were to increase the DOP even more  above a certain DOP we would see a tailing off of the performance curve and the resource cost / performance would become less optimal. Therefore the ideal DOP is the best resource/performance point for that statement. The goal of Queuing On a normal production system we should see statements running concurrently. On a Database Machine we typically see high concurrency rates, so we need to find a way to deal with both high DOP’s and high concurrency. Queuing is intended to make sure we Don’t throttle down a DOP because other statements are running on the system Stay within the physical limits of a system’s processing power Instead of making statements go at a lower DOP we queue them to make sure they will get all the resources they want to run efficiently without trashing the system. The theory – and hopefully – practice is that by giving a statement the optimal DOP the sum of all statements runs faster with queuing than without queuing. Increasing the Number of Potential Parallel Statements To determine how many statements we will consider running in parallel a single parameter should be looked at. That parameter is called PARALLEL_MIN_TIME_THRESHOLD. The default value is set to 10 seconds. So far there is nothing new here…, but do realize that anything serial (e.g. that stays under the threshold) goes straight into processing as is not considered in the rest of this post. Now, if you have a system where you have two groups of queries, serial short running and potentially parallel long running ones, you may want to worry only about the long running ones with this parallel statement threshold. As an example, lets assume the short running stuff runs on average between 1 and 15 seconds in serial (and the business is quite happy with that). The long running stuff is in the realm of 1 – 5 minutes. It might be a good choice to set the threshold to somewhere north of 30 seconds. That way the short running queries all run serial as they do today (if it ain’t broken, don’t fix it) and allows the long running ones to be evaluated for (higher degrees of) parallelism. This makes sense because the longer running ones are (at least in theory) more interesting to unleash a parallel processing model on and the benefits of running these in parallel are much more significant (again, that is mostly the case). Setting a Maximum DOP for a Statement Now that you know how to control how many of your statements are considered to run in parallel, lets talk about the specific degree of any given statement that will be evaluated. As the initial post describes this is controlled by PARALLEL_DEGREE_LIMIT. This parameter controls the degree on the entire cluster and by default it is CPU (meaning it equals Default DOP). For the sake of an example, let’s say our Default DOP is 32. Looking at our 5 minute queries from the previous paragraph, the limit to 32 means that none of the statements that are evaluated for Auto DOP ever runs at more than DOP of 32. Concurrently Running a High DOP A basic assumption about running high DOP statements at high concurrency is that you at some point in time (and this is true on any parallel processing platform!) will run into a resource limitation. And yes, you can then buy more hardware (e.g. expand the Database Machine in Oracle’s case), but that is not the point of this post… The goal is to find a balance between the highest possible DOP for each statement and the number of statements running concurrently, but with an emphasis on running each statement at that highest efficiency DOP. The PARALLEL_SERVER_TARGET parameter is the all important concurrency slider here. Setting this parameter to a higher number means more statements get to run at their maximum parallel degree before queuing kicks in.  PARALLEL_SERVER_TARGET is set per instance (so needs to be set to the same value on all 8 nodes in a full rack Database Machine). Just as a side note, this parameter is set in processes, not in DOP, which equates to 4* Default DOP (2 processes for a DOP, default value is 2 * Default DOP, hence a default of 4 * Default DOP). Let’s say we have PARALLEL_SERVER_TARGET set to 128. With our limit set to 32 (the default) we are able to run 4 statements concurrently at the highest DOP possible on this system before we start queuing. If these 4 statements are running, any next statement will be queued. To run a system at high concurrency the PARALLEL_SERVER_TARGET should be raised from its default to be much closer (start with 60% or so) to PARALLEL_MAX_SERVERS. By using both PARALLEL_SERVER_TARGET and PARALLEL_DEGREE_LIMIT you can control easily how many statements run concurrently at good DOPs without excessive queuing. Because each workload is a little different, it makes sense to plan ahead and look at these parameters and set these based on your requirements.

  Read the article

• Reflections on GiveCamp

  - by Reed

  I participated in the Seattle GiveCamp over the weekend, and am entirely impressed.  GiveCamp is a great event – I especially like how rewarding it is for everybody involved.  I strongly encourage any and all developers to watch for future GiveCamp events, and consider participating, for many reasons… GiveCamp provides real value to organizations that truly need help.  The Seattle event alone succeeded in helping sixteen non-profit organizations in many different ways.  The projects involved varied dramatically, including website redesigns, SEO, reworking data management workflows, and even game development.  Many non-profits have a strong need for good, quality technical help.  However, nearly every non-profit organization has an incredibly limited budget.  GiveCamp is a way to really give back, and provide incredibly valuable help to organizations that truly benefit. My experience has shown many developers to be incredibly generous – this is a chance to dedicate your energy to helping others in a way that really takes advantage of your expertise.  Your time as a developer is incredibly valuable, and this puts something of incredible value directly into the hands of places its needed. First, and foremost, GiveCamp is about providing technical help to non-profit organizations in need. GiveCamp can make you a better developer.  This is a fantastic opportunity for us, as developers, to work with new people, in a new setting.  The incredibly short time frame (one weekend for a deliverable project) and intense motivation to succeed provides a huge opportunity for learning from peers.  I’d personally like to thank off the developers with whom I worked – I learned something from each and every one of you.  I hope to see and work with all of you again someday. GiveCamp provides an opportunity for you to work outside of your comfort zone. While it’s always nice to be an expert, it’s also valuable to work on a project where you have little or no direct experience.  My team focused on a complete reworking of our organizations message and a complete new website redesign and deployment using WordPress.  While I’d used WordPress for my blog, and had some experience, this is completely unrelated to my professional work.  In fact, nobody on our team normally worked directly with the technologies involved – yet together we managed to succeed in delivering our goals.  As developers, it’s easy to want to stay abreast of new technology surrounding our expertise, but its rare that we get a chance to sit down and work on something practical that is completely outside of our normal realm of work.  I’m a desktop developer by trade, and spent much of the weekend working with CSS and Photoshop.  Many of the projects organizations need don’t match perfectly with the skill set in the room – yet all of the software professionals rose to the occasion and delivered practical, usable applications. GiveCamp is a short term, known commitment. While this seems obvious, I think it’s an important aspect to remember.  This is a huge part of what makes it successful – you can work, completely focused, on a project, then walk away completely when you’re done.  There is no expectation of continued involvement.  While many of the professionals I’ve talked to are willing to contribute some amount of their time beyond the camp, this is not expected. The freedom this provides is immense.  In addition, the motivation this brings is incredibly valuable.  Every developer in the room was very focused on delivering in time – you have one shot to get it as good as possible, and leave it with the organization in a way that can be maintained by them.  This is a rare experience – and excellent practice at time management for everyone involved. GiveCamp provides a great way to meet and network with your peers. Not only do you get to network with other software professionals in your area – you get to network with amazing people.  Every single person in the room is there to try to help people.  The balance of altruism, intelligence, and expertise in the room is something I’ve never before experienced. During the presentations of what was accomplished, I felt blessed to participate.  I know many people in the room were incredibly touched by the level of dedication and accomplishment over the weekend. GiveCamp is fun. At the end of the experience, I would have signed up again, even if it was a painful, tedious weekend – merely due to the amazing accomplishments achieved throughout the event.  However, the event is fun.  Everybody I talked to, the entire weekend, was having a good time.  While there were many faces focused into a near grimace at times (including mine, I’ll admit), this was always in response to a particularly challenging problem or task.  The challenges just added to the overall enjoyment of the weekend – part of why I became a developer in the first place is my love for challenge and puzzles, and a short deadline using unfamiliar technology provided plenty of opportunity for puzzles.  As soon as people would stand up, it was another smile.   If you’re a developer, I’d recommend looking at GiveCamp more closely.  Watch for an event in your area.  If there isn’t one, consider building a team and organizing an event.  The experience is worth the commitment. 

  Read the article

• Atheros Wireless card shows up as two different models?

  - by geermc4

  Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >