Search Results

Search found 2504 results on 101 pages for 'hp envy'.

Page 24/101 | < Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >

• HP server delayed boot

  - by jjrab

  I'm currently using HP Proliant DL120 G5 servers running VMWare ESXi 4 to run server VM's. They are connecting to an iSCSI SAN for the shared storage. I'd like to implement a delayed boot of these hosts servers so that they don't boot up and try to connect to the SAN before the SAN is ready for connections after a power failure. Does anyone know of a good way to do this?

  Read the article

• Directly connected HP server and CX4 with fibre

  - by Ulysses Mpasdekis

  I have direcly connected (with fibre) a HP ProLiant BL460c G7 with a EMC CX4. I installed VMWare Esxi 5.0. The problem is that cx4 cannot connect to the blade. It seems that there is no connectivity problem, because the server can be connected to fibre switch with other equipment (EVA 4000) and also cx4 is already atteched to one same server. The problem seems to exist somewhere between the cx4 and esxi when they are direclty attached. Any ideas??

  Read the article

• HP does not power off after shutdown (Vista)

  - by tommi

  My HP d330 does not properly shutdown, after Vista "shutting down" message the lcd screen goes black, but both HD + Power Leds remain on.. Any ideas? No entries in EventViewer about this. Keyboard leds no more work after this partial shutdown so I assume hardware is partially shutdown..? Same problem occurs when I choose Sleep from shutdown menu

  Read the article

• Z600 Workstation ACPI Fan Noise

  - by dpb

  Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

  Read the article

• Installazione ATI Mobility Radeon HD 5650 su Ubuntu 11.10

  - by Antonio

  Salve a tutti, possiedo un portatile HP Pavillion dv6 3110 con scheda video dedicata ATI Mobility Radeon HD 5650 da 1 Giga ed ho installato da poco Ubuntu 11.10 Versione 64 bit. Ho seguito molte guide su internet per installare i driver per la mia scheda video ma nessuna ha dato esito positivo. Nella finestra "driver aggiuntivi" sono riuscito ad installare i "Driver grafici fglrx proprietari ATI/AMD" ma dopo il riavvio non riesco ad utilizzare correttamente la scheda video. Mentre i "Driver grafici fglrx proprietari ATI/AMD (aggiornamenti post-release)" non me li fa proprio installare segnalando un errore che riporto di seguito "L'installazione di questo driver non è riuscita.Consultare i file di registro per maggiori informazioni: /var/log/jockey.log". Ho pensato allora di scaricare direttamente dal sito di AMD gli ultimi driver rilasciati attraverso il pacchetto "amd-driver-installer-12-3-x86.x86_64.run", l'ho lanciato, ho seguito il wizard di installazione, l'installazione viene completata, digito "sudo aticonfig --initial" per la configurazione iniziale, ma al riavvio del pc appaiono soltanto scritte su schermo nero con una serie di "OK" e qualche "FAIL". Ho provato questa procedura anche per le versioni precedenti dei driver, ma il risultato è sempre lo stesso. Sono disperato. Riuscirò mai ad utilizzare la mia scheda video? Vi incollo per completezza ciò che mi appare all'esecuzione del comando "lspci -nn | grep VGA" per visualizzare i processori grafici presenti sul mio pc: 00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0046] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] [1002:68c1] Grazie anticipatamente a coloro che potranno aiutarmi. Cordiali Saluti Antonio Giordano

  Read the article

• Laptop drains of quickly with battery

  - by Shyam

  I am a user since years in ubuntu and I have not come across this problem with ubuntu till date. My battery drains off immediately after I unplug my AC power. The options I tried: 1) checked the battery state with : cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charged present rate: 0 mA remaining capacity: 392 mAh present voltage: 12476 mV Initially it was showing charging state: charging after 5mins it started displaying as charged. ! Based on that if I remove my AC Power it shows low battery notification. 2) When I run acpi : acpi -b Battery 0: Unknown, 9% The battery state shows as unknown. But initially when we plug-in to AC adapter acpi -b Battery 0: Charging, 9%, 13:04:00 until charged 3) When the check the same with : upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C09:00/PNP0C0A:00/power_supply/BAT0 vendor: HP power supply: yes updated: Thu Nov 1 16:06:40 2012 (20 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 4.2336 Wh energy-empty: 0 Wh energy-full: 33.1128 Wh energy-full-design: 33.1128 Wh energy-rate: 5.6052 W voltage: 12.474 V time to full: 5.2 hours percentage: 12.7854% capacity: 100% technology: lithium-ion Is the power stats output, It says 5hrs to charge completely, If I charge it even more than 5hrs and unplug the AC power, It again cribs stating LOW BATTERY !! The same thing does not happen with Windows7. Any suggestions/ help will be greatly appreciated.

  Read the article

• How do I re-enable the backlight?

  - by Scott Severance

  Since Oneiric, if I leave my machine (HP Mini 110 netbook) unattended and it goes into power-save mode, the backlight gets disabled. How can I turn it back on? Note that the keyboard backlight controls (Fn+F4 and Fn+F3) don't have any effect in this situation. I've already filed a bug, but filing a bug doesn't fix my problem. I tried this workaround posted in this bug report dealing with Acer laptops: sudo setpci -s 00:02.0 F4.B=0 However, if anything, that command makes things worse. In the general case, I can see a little bit if I'm in a dark room with a flashlight aimed just so. But after running setpci I can't see anything. And I find the setpci documentation to be utterly incomprehensible, so I don't know whether I need to tweak my command somehow or whether I'm completely barking up the wrong tree. Update: I've found a workaround: I'm now booting with the kernel parameter acpi=off. This disables power management, which prevents the machine from going into power saving mode and thus failing to come back up correctly. Of course, not having power management means that I can't use suspend or do anything to manage power other than powering it off (even then, I have to manually use the power switch). Also, it prevents me from using Unity 3D or Gnome Shell, forcing me into Unity 2C or Gnome Classic. So, I'd really like to be able to stop using this hack.

  Read the article

• How do I get my graphic card to work properly?

  - by Lucas

  I been having some problems with my graphic card for a time now. But I had enough when I did'nt get Oil Rush to work on my HP Pavilion g6. The system has suggested hardware drivers for me, but the first time I installed them they pretty much fucked up the graphics. After some time I managed to get the computere to work properly (I thought) again. When the game did'nt work I tried to the hardware drivers for the graphic card anyway. First of all there was to possible choices insted of one, as the last time I installed the drivers (when it did'nt work out so good). The choices are: ATI/AMDs proprietary video drivers FGLRX (update for edition) and Proprietary FGLRX-video drivers for ATI/AMD I realized the drivers probebly are pretty much the same, so I tried the first one. But this did'nt work. Instead I was asked to "Look in to /usr/var/log/jockey.log". This did'nt helped me much. Instead I choiced the other one, wich was installed and after reboot there where some changes. First of all there was a lot more details for Unity that was'nt there before and some shortkeys are now working that did'nt before (like Ctrl + T and the Prt Sc-button). But overall everything doesn't work as it used to. Like when you browse between the workspaces it doesn't look the same. To get to the point: it doesn't work well right now even if I got some things better and now will not Oil Rush (as I mentioned in the beginning) even start. SO! Can someone give me any advice with this? I'm stuck. Can't manage to see whats wrong right now. Any help? My graphic card is AMD Radeon HD 6470M.

  Read the article

• Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

  - by Thunder

  I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• Can't get HP Officejet 6500 card reader to work.

  - by Dennis

  This network (wired) printer works great using the latest HPLIP drivers. However when I plug in an SD card, it just blinks and never shows up mounted anywhere. Has anyone come up with a way to mount these? I'm using Lucid, 10.04. re: version, hp-info says xxxxx@lucid:~$ hp-info HP Linux Imaging and Printing System (ver. 3.10.5) Device Information Utility ver. 5.2 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Using device: hp:/net/Officejet_6500_E709a?zc=HP05857E

  Read the article

• Failure to Boot 12.04 on HP AMD Dual Core. Rescue Mode doesn't even come up

  - by L R Bellmore Jr

  I have 12.04 installed on HP 64 bit dual core AMD laptop.. worked great until about 1-2 months ago.. now takes 1/2 hour to 25 hours to boot if it ever does. A minor number of times I get the HP logo with hash lines on screen and it just hangs... When it finally boots 95% it will run until I turn it off days later to see if any of the upgrades fixed the problem. Currently, if it boots, it is random.. .left on over night .. 2 nights ago and came back to a HP logo with Hash Lines horizontal across the screen.. frozen.. rebooted back to black screen.. no HP logo... Most often when it does boot.. no HP logo.. just cursor shows up.. and then I know it will finally load... computer has been made worthless and it is my work computer..HELP PLEASE... Rescue Mode can't be invoked.. computer doesnt respond.. has shown up 3 times in about 100 and when I have tried it... 1 time it resulted in a boot up but then failed in a couple hours.

  Read the article

• Les commutateurs HP E-Series à économie d'énergie intègrent le nouveau standard IEEE et diminuent le coût total de possession de 51 %

  Les commutateurs HP E-Series à économie d'énergie intègrent le nouveau standard IEEE et diminuent le coût total de possession de 51 % HP a annoncé le 6 janvier l'arrivée de ses premiers produits fondés sur un nouveau standard Ethernet à haute efficacité énergétique. Un standard que HP se félicite d'avoir aidé à développer, et qui permet aux entreprises de réduire la consommation énergétique et les coûts opérationnels des équipements IT. Le standard Ethernet à haute efficacité énergétique de l'IEEE (IEEE 802.3az) ajustant la consommation automatiquement en fonction du trafic réseau effectif entre les commutateurs et les autres équipements connectés au réseau, et ce, en temps réel.

  Read the article

• print job doesn't go to print queue

  - by flatsguide

  I have two printers hooked up to my intel imac. I am having a printing error. It seems that whenever i try to print (a simple text doc) I am unable to get the print job to go to print queue with one of my printers. I have a HP c7280 and a HP c3100. I am able to get one working properly, but the other doesn't seem to allow it to go to the print queue. I have switched usb cables (with the printer that I know works) and both printers are recognized by the computer in the printer preferences pane. I've tried reseting the printer system in the printer setup utility.. reloaded the drivers from HP.. etc. If anyone has a suggestion or could point me to a little help i'd be VERY grateful Best Regards.. B

  Read the article

• HP devient numéro 1 mondial du marché des serveurs, à la fois en chiffre d'affaires et en nombre d'unités vendues

  HP devient numéro 1 mondial du marché des serveurs A la fois en chiffre d'affaires et en nombre d'unités vendues Selon un nouveau rapport publié par IDC, HP est devenu numéro 1 mondial du marché des serveurs en 2010. Et ce à la fois en termes de chiffre d'affaires qu'en nombre d'unités vendues. Selon IDC, HP totalise 39% de part de marché en chiffre d'affaires sur le segment des serveurs x86 en 2010, avec une croissance de 34% par rapport à 2009 (de 29 % suppérieure à celle du marcché). « Cela fait désormais plus de 14 années consécutives (59 trimestres), depuis qu'IDC étudie la part de marché des serveurs x86, que les serveurs HP ProLiant occupent la première place de ...

  Read the article

• HP ouvre ses serveurs de mission critique à l'architecture x86 et annonce le projet Odyssey de convergence avec les systèmes UNIX

  HP ouvre ses serveurs à mission critique à l'architecture x86 Et annonce le Projet Odyssey de convergence avec les systèmes UNIX HP se lance dans un projet d'envergure qui vise à réunir les architectures serveur UNIX et x86 au sein d'une plateforme unique pour les systèmes critiques : son Projet Odyssey. Les serveurs haut de gamme Integrity vont pouvoir accueillir des processeurs Intel Xeon x86, compatibles Windows et Linux, qui viennent disputer le règne de l'Itanium vieillissant que HP et Intel

  Read the article

• HP présente "Net-Zero Energy DataCenter", une architecture permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts

  HP présente son architecture "Net-Zero Energy DataCenter", permettant une réduction de 30% de la consommation d'énergie et de 80% des coûts et dépendance des réseaux électriques HP vient de présenter son concept d'architecture « Net-Zero Energy » des centres de données économes en énergie, permettant de réduire la dépendance des réseaux électriques traditionnels. La vision de HP est de permettre aux entreprises de faire fonctionner les centres de données avec en utilisant leur propre énergie générée sur place, grâce à des sources renouvelables afin d'éliminer des dépendances comme l'emplacement, l'approvisionnement en énergie et les couts. L'architecture proposée ...

  Read the article

• Uncorrectable machine check

  - by GregC

  I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

  Read the article

• HP dévoile ses PC tout-en-un sous Windows 8, le Spectre One, l'Envy et le Pavillon seront commercialisés à partir d'octobre

  HP dévoile ses PC tout-en-un sous Windows 8 le Spectre One, l'Envy et le Pavillon seront commercialisés à partir d'octobre La sortie de Windows 8 est proche. C'est le moment pour les constructeurs de donner un avant-gout des dispositifs qui seront commercialisés à compter de la date officielle de lancement de l'OS le 26 octobre prochain. Le constructeur HP a levé le voile sur plusieurs modèles de PC tout-en-un (All-in-one) fonctionnant sur Windows 8. Le premier de la liste dont la dalle n'est pas tactile est le PC Spectre One. Composé d'un large écran Full HD de 23 pouces d'une résolution de 1920x1080 pixels, ce modèle embarque un processeur Intel Ivy Bridge, une mémoire p...

  Read the article

• rsh connection from Linux to HP times out.

  - by kadeshpa

  I added Linux boxes to /etc/hosts.equiv and .rhosts file for rsh connectivity to HP box. I am able to do rsh as root from Linux to HP. But if I run in a root shell as different user connection times out. Any reason?

  Read the article

• My remote controller is not working.Hp Laptop Dv4 [closed]

  - by Vibin Jith

  I am new with HP. My problem is my remote control is not working. Is there is any driver is required ? if yes which one? i am using Hp Pavilion DV4 1211tu notebook Thank u

  Read the article

• Unable to install Windows 2008R2 x64 on HP ProLiant ML 150 G6 with Smart Array B110i

  - by lrosa

  I am installing Windows 2008 R2 x64 (Microsoft OEM version) on a ProLint ML 150 with Smart Array B110i controller. I load the B110i drivers from a USB thumbdrive, Windows Setup can create, delete and format correctly the partitions on the raidset, but when I exit the disk manager to start setup, Windows says that he cannot find a primary partition to install Windows. The EasySetup disk provided with the system does not support Windows 2008 R2 x64 Microsoft OEM. I downloaded the latest version of EasySetup from HP website, but does not support Windows 2008 R2 x64 Microsoft OEM. Any suggestion?

  Read the article

• Renci.SSHNet and HP ILO 4

  - by Andrew J. Brehm

  I am using Renci.SSHNet to connect to HP iLO processors. Generally this works fine and I can connect and run several commands and disconnect. However, I noticed that a few new servers that use iLO 4 simply don't react to any but the first command sent. When I login using Putty everything works fine, but when using an SSH connection with Renci only the first command sent is recognised whereas the second and further commands do not cause any reaction whatsoever by the iLO processor, not even an error message. Any ideas why that might be?

  Read the article

• NIC Teaming HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server NIC TEaming. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB/TLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• HP Compaq nc8230 hackintosh?

  - by David

  I have an HP Compaq nc8230 with a Pentium M (1.86GHz, SSE2) 1.5GB RAM, and an ATI Mobility Radeon x600 (64MB dedicated, 596MB shared). I'm trying to install Mac OS X Leopard on it. I have a legal copy of Leopard from apple, so I tried using the generic.iso and putting in the Leo DVD when it tells me to. It gets to the Apple logo with the spinny thing for maybe 5 minutes, but then the computer just restarts. I don't get past the apple logo. Then I tried using iDeneb 1.3 (10.5.5) but it doesn't boot into the DVD. My computer just ignores it and moves onto the hard drive. I would appreciate some help with either methods (moat prefferably the more legal one), I really need an intel Mac, my PowerBook G4 just doesn't cut it.

  Read the article

< Previous Page | 20 21 22 23 24 25 26 27 28 29 30 31  | Next Page >