character codes - Page 240

Understanding EDI 997

- by VishnuTiwariBlog

Hi Guys, This is for the EDI starter. Below is the complete detail of EDI 997 segment and element details. 997 Functional Acknowledgment Transaction Layout: No. Seg ID Name Description Example M/O 010 ST Transaction Set Header To indicate the start of a transaction set and to assign a control number ST*997*382823~ M ST01 Code uniquely identifying a Transaction Set M ST02 Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set M 020 AK1 Functional Group Response Header To start acknowledgment of a functional group AK1*QM*2459823 M AK101 Code identifying a group of application related transaction sets IN Invoice Information (810) SH Ship Notice/Manifest (856) AK102 Assigned number originated and maintained by the sender 030 AK2 Transaction Set Response Header To start acknowledgment of a single transaction set AK2*856*001 M AK201 Code uniquely identifying a Transaction Set 810 Invoice 856 Ship Notice/Manifest M AK202 Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set M 040 AK3 Data Segment Note To report errors in a data segment and identify the location of the data segment AK3*TD3*9 O AK301 Segment ID Code Code defining the segment ID of the data segment in error (See Appendix A - Number 77) AK302 Segment Position in Transaction Set The numerical count position of this data segment from the start of the transaction set: the transaction set header is count position 1 050 AK4 Data Element Note To report errors in a data element or composite data structure and identify the location of the data element AK4*2**2 O AK401 Position in Segment Code indicating the relative position of a simple data element, or the relative position of a composite data structure combined with the relative position of the component data element within the composite data structure, in error; the count starts with 1 for the simple data element or composite data structure immediately following the segment ID AK402 Element Position in Segment This is used to indicate the relative position of a simple data element, or the relative position of a composite data structure with the relative position of the component within the composite data structure, in error; in the data segment the count starts with 1 for the simple data element or composite data structure immediately following the segment ID AK403 Data Element Syntax Error Code Code indicating the error found after syntax edits of a data element 1 Mandatory Data Element Missing 2 Conditional Required Data Element Missing 3 Too Many Data Elements 4 Data Element Too Short 5 Data Element Too Long 6 Invalid Character in Data Element 7 Invalid Code Value 8 Invalid Date 9 Invalid Time 10 Exclusion Condition Violated AK404 Copy of Bad Data Element This is a copy of the data element in error 060 AK5 AK5 Transaction Set Response Trailer To acknowledge acceptance or rejection and report errors in a transaction set AK5*A~ AK5*R*5~ M AK501 Transaction Set Acknowledgment Code Code indicating accept or reject condition based on the syntax editing of the transaction set A Accepted E Accepted But Errors Were Noted R Rejected AK502 Transaction Set Syntax Error Code Code indicating error found based on the syntax editing of a transaction set 1 Transaction Set Not Supported 2 Transaction Set Trailer Missing 3 Transaction Set Control Number in Header and Trailer Do Not Match 4 Number of Included Segments Does Not Match Actual Count 5 One or More Segments in Error 6 Missing or Invalid Transaction Set Identifier 7 Missing or Invalid Transaction Set Control Number 070 AK9 Functional Group Response Trailer To acknowledge acceptance or rejection of a functional group and report the number of included transaction sets from the original trailer, the accepted sets, and the received sets in this functional group AK9*A*1*1*1~ AK9*R*1*1*0~ M AK901 Functional Group Acknowledge Code Code indicating accept or reject condition based on the syntax editing of the functional group A Accepted E Accepted, But Errors Were Noted. R Rejected AK902 Number of Transaction Sets Included Total number of transaction sets included in the functional group or interchange (transmission) group terminated by the trailer containing this data element AK903 Number of Received Transaction Sets Number of Transaction Sets received AK904 Number of Accepted Transaction Sets Number of accepted Transaction Sets in a Functional Group AK905 Functional Group Syntax Error Code Code indicating error found based on the syntax editing of the functional group header and/or trailer 1 Functional Group Not Supported 2 Functional Group Version Not Supported 3 Functional Group Trailer Missing 4 Group Control Number in the Functional Group Header and Trailer Do Not Agree 5 Number of Included Transaction Sets Does Not Match Actual Count 6 Group Control Number Violates Syntax 080 SE Transaction Set Trailer To indicate the end of the transaction set and provide the count of the transmitted segments (including the beginning (ST) and ending (SE) segments) SE*9*223~ M SE01 Number of Included Segments Total number of segments included in a transaction set including ST and SE segments SE02 Transaction Set Control Number Identifying control number that must be unique within the transaction set functional group assigned by the originator for a transaction set

Read the article

Add Your Gmail Account to Outlook 2010 using POP

- by Matthew Guay

Are you excited about the latest version of Outlook, and want to get it setup with your Gmail accounts? Here’s how you can easily add your Gmail account using POP to Outlook 2010. Getting Started Log into your Gmail account an go to your settings page. Under the Forwarding and POP/IMAP tab make sure POP is enabled. You can choose to enable POP access for all new mail that arrives from now on, or for all mail in your Gmail account. On the second option, we suggest you chose keep Gmail’s copy in the Inbox so you can still access your emails on the Gmail server. Add Your Account to Outlook 2010 If you haven’t run Outlook 2010 yet, click Next to start setup and add your email account. Select Yes to add an email account to Outlook. Now you’re ready to start entering your settings to access your email. Or, if you’ve already been using Outlook and want to add a new POP account, click File and then select Add Account under Account Information. Outlook 2010 can often automatically find and configure your account with just your email address and password, so enter these and click Next to let Outlook try to set it up automatically. Outlook will now scan for the settings for your email account. If Outlook was able to find settings and configure your account automatically, you’ll see this success screen. Depending on your setup, Gmail is automatically setup, but sometimes it fails to find the settings. If this is the case, we’ll go back and manually configure it. Manually Configure Outlook for Gmail Back at the account setup screen, select Manually configure server settings or additional server types and click Next. Select Internet E-mail and then click Next. Enter your username, email address, and log in information. Under Server information enter in the following: Account Type: POP3 Incoming mail server: pop.gmail.com Outgoing mail server: smtp.gmail.com Make sure to check Remember password so you don’t have to enter it every time. After that data is entered in, click on the More Settings button. Select the Outgoing Server tab, and check My outgoing server (SMTP) requires authentication. Verify Use same settings as my incoming mail server is marked as well. Next select the Advanced tab and enter the following information: Incoming Server (POP3): 995 Outgoing server (SMTP): 587 Check This server requires an encrypted connection (SSL) Set Use the following type of encrypted connection to TLS You also might want to uncheck the box to Remove messages from the server after a number of days. This way your messages will still be accessible from Gmail online. Click OK to close the window, and then click Next to finish setting up the account. Outlook will test your account settings to make sure everything will work; click Close when this is finished. Provided everything was entered in correctly, you’ll be greeted with a successful setup message…click Finish. Gmail will be all ready to sync with Outlook 2010. Enjoy your Gmail account in Outlook, complete with fast indexed searching, conversation view, and more! Conclusion Adding Gmail using the POP setting to Outlook 2010 is usually easy and only takes a few steps. Even if you have to enter your settings manually, it is still a fairly simple process. You can add multiple email accounts using POP3 if you wish, and if you’d like to sync IMAP accounts, check out our tutorial on setting up Gmail using IMAP in Outlook 2010. Similar Articles Productive Geek Tips Add Your Gmail To Windows Live MailAdd Your Gmail Account to Outlook 2007Use Gmail IMAP in Microsoft Outlook 2007Figure out which Online accounts are selling your email to spammersAdd Your Gmail Account to Outlook 2010 Using IMAP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

Read the article

ASP.NET, HTTP 404 and SEO

- by paxer

The other day our SEO Manager told me that he is not happy about the way ASP.NET application return HTTP response codes for Page Not Found (404) situation. I've started research and found interesting things, which could probably help others in similar situation. 1) By default ASP.NET application handle 404 error by using next web.config settings <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.html"/> </customErrors> However this approach has a problem, and this is actually what our SEO manager was talking about. This is what HTTP return to request in case of Page not Found situation. So first of all it return HTTP 302 Redirect code and then HTTP 200 - ok code. The problem : We need to have HTTP 404 response code at the end of response for SEO purposes. Solution 1 Let's change a bit our web.config settings to handle 404 error not on static html page but on .aspx page <customErrors defaultRedirect="GenericError.htm" mode="On"> <error statusCode="404" redirect="404.aspx"/> </customErrors> And now let's add in Page_Load event on 404.aspx page next lines protected void Page_Load(object sender, EventArgs e) { Response.StatusCode = 404; } Now let's run our test again Now it has got better, last HTTP response code is 404, but my SEO manager still was not happy, becouse we still have 302 code before it, and as he said this is bad for Google search optimization. So we need to have only 404 HTTP code alone. Solution 2 Let's comment our web.config settings  Now, let's open our Global.asax file, or if it does not exist in your project - add it. Then we need to add next logic which will detect if server error code is 404 (Page not found) then handle it. protected void Application_Error(object sender, EventArgs e) { Exception ex = Server.GetLastError(); if (ex is HttpException) { if (((HttpException)(ex)).GetHttpCode() == 404) Server.Transfer("~/404.html"); } // Code that runs when an unhandled error occurs Server.Transfer("~/GenericError.htm"); } Cool, now let's start our test again... Yehaa, looks like now we have only 404 HTTP response code, SEO manager and Google are happy and so do i:) Hope this helps!

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

Converting Openfire IM datetime values in SQL Server to / from VARCHAR(15) and DATETIME data types

- by Brian Biales

A client is using Openfire IM for their users, and would like some custom queries to audit user conversations (which are stored by Openfire in tables in the SQL Server database). Because Openfire supports multiple database servers and multiple platforms, the designers chose to store all date/time stamps in the database as 15 character strings, which get converted to Java Date objects in their code (Openfire is written in Java). I did some digging around, and, so I don't forget and in case someone else will find this useful, I will put the simple algorithms here for converting back and forth between SQL DATETIME and the Java string representation. The Java string representation is the number of milliseconds since 1/1/1970. SQL Server's DATETIME is actually represented as a float, the value being the number of days since 1/1/1900, the portion after the decimal point representing the hours/minutes/seconds/milliseconds... as a fractional part of a day. Try this and you will see this is true: SELECT CAST(0 AS DATETIME) and you will see it returns the date 1/1/1900. The difference in days between SQL Server's 0 date of 1/1/1900 and the Java representation's 0 date of 1/1/1970 is found easily using the following SQL: SELECT DATEDIFF(D, '1900-01-01', '1970-01-01') which returns 25567. There are 25567 days between these dates. So to convert from the Java string to SQL Server's date time, we need to convert the number of milliseconds to a floating point representation of the number of days since 1/1/1970, then add the 25567 to change this to the number of days since 1/1/1900. To convert to days, you need to divide the number by 1000 ms/s, then by 60 seconds/minute, then by 60 minutes/hour, then by 24 hours/day. Or simply divide by 1000*60*60*24, or 86400000. So, to summarize, we need to cast this string as a float, divide by 86400000 milliseconds/day, then add 25567 days, and cast the resulting value to a DateTime. Here is an example: DECLARE @tmp as VARCHAR(15) SET @tmp = '1268231722123' SELECT @tmp as JavaTime, CAST((CAST(@tmp AS FLOAT) / 86400000) + 25567 AS DATETIME) as SQLTime To convert from SQL datetime back to the Java time format is not quite as simple, I found, because floats of that size do not convert nicely to strings, they end up in scientific notation using the CONVERT function or CAST function. But I found a couple ways around that problem. You can convert a date to the number of seconds since 1/1/1970 very easily using the DATEDIFF function, as this value fits in an Int. If you don't need to worry about the milliseconds, simply cast this integer as a string, and then concatenate '000' at the end, essentially multiplying this number by 1000, and making it milliseconds since 1/1/1970. If, however, you do care about the milliseconds, you will need to use DATEPART to get the milliseconds part of the date, cast this integer to a string, and then pad zeros on the left to make sure this is three digits, and concatenate these three digits to the number of seconds string above. And finally, I discovered by casting to DECIMAL(15,0) then to VARCHAR(15), I avoid the scientific notation issue. So here are all my examples, pick the one you like best... First, here is the simple approach if you don't care about the milliseconds: DECLARE @tmp as VARCHAR(15) DECLARE @dt as DATETIME SET @dt = '2010-03-10 14:35:22.123' SET @tmp = CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15)) + '000' SELECT @tmp as JavaTime, @dt as SQLTime If you want to keep the milliseconds: DECLARE @tmp as VARCHAR(15) DECLARE @dt as DATETIME DECLARE @ms as int SET @dt = '2010-03-10 14:35:22.123' SET @ms as DATEPART(ms, @dt) SET @tmp = CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15)) + RIGHT('000' + CAST(@ms AS VARCHAR(3)), 3) SELECT @tmp as JavaTime, @dt as SQLTime Or, in one fell swoop: DECLARE @dt as DATETIME SET @dt = '2010-03-10 14:35:22.123' SELECT @dt as SQLTime , CAST(DATEDIFF(s, '1970-01-01 00:00:00' , @dt) AS VARCHAR(15)) + RIGHT('000' + CAST( DATEPART(ms, @dt) AS VARCHAR(3)), 3) as JavaTime And finally, a way to simply reverse the math used converting from Java date to SQL date. Note the parenthesis - watch out for operator precedence, you want to subtract, then multiply: DECLARE @dt as DATETIME SET @dt = '2010-03-10 14:35:22.123' SELECT @dt as SQLTime , CAST(CAST((CAST(@dt as Float) - 25567.0) * 86400000.0 as DECIMAL(15,0)) as VARCHAR(15)) as JavaTime Interestingly, I found that converting to SQL Date time can lose some accuracy, when I converted the time above to Java time then converted that back to DateTime, the number of milliseconds is 120, not 123. As I am not interested in the milliseconds, this is ok for me. But you may want to look into using DateTime2 in SQL Server 2008 for more accuracy.

Read the article

Grouping data in LINQ with the help of group keyword

- by vik20000in

While working with any kind of advanced query grouping is a very important factor. Grouping helps in executing special function like sum, max average etc to be performed on certain groups of data inside the date result set. Grouping is done with the help of the Group method. Below is an example of the basic group functionality. int[] numbers = { 5, 4, 1, 3, 9, 8, 6, 7, 2, 0 }; var numberGroups = from num in numbers group num by num % 5 into numGroup select new { Remainder = numGroup.Key, Numbers = numGroup }; In the above example we have grouped the values based on the reminder left over when divided by 5. First we are grouping the values based on the reminder when divided by 5 into the numgroup variable. numGroup.Key gives the value of the key on which the grouping has been applied. And the numGroup itself contains all the records that are contained in that group. Below is another example to explain the same. string[] words = { "blueberry", "abacus", "banana", "apple", "cheese" }; var wordGroups = from num in words group num by num[0] into grp select new { FirstLetter = grp.Key, Words = grp }; In the above example we are grouping the value with the first character of the string (num[0]). Just like the order operator the group by clause also allows us to write our own logic for the Equal comparison (That means we can group Item by ignoring case also by writing out own implementation). For this we need to pass an object that implements the IEqualityComparer<string> interface. Below is an example. public class AnagramEqualityComparer : IEqualityComparer<string> { public bool Equals(string x, string y) { return getCanonicalString(x) == getCanonicalString(y); } public int GetHashCode(string obj) { return getCanonicalString(obj).GetHashCode(); } private string getCanonicalString(string word) { char[] wordChars = word.ToCharArray(); Array.Sort<char>(wordChars); return new string(wordChars); } } string[] anagrams = {"from ", " salt", " earn", " last ", " near "}; var orderGroups = anagrams.GroupBy(w => w.Trim(), new AnagramEqualityComparer()); Vikram

Read the article

Inserting and Deleting Sub Rows in GridView

- by Vincent Maverick Durano

A user in the forums (http://forums.asp.net) is asking how to insert sub rows in GridView and also add delete functionality for the inserted sub rows. In this post I'm going to demonstrate how to this in ASP.NET WebForms. The basic idea to achieve this is we just need to insert row data in the DataSource that is being used in GridView since the GridView rows will be generated based on the DataSource data. To make it more clear then let's build up a sample application. To start fire up Visual Studio and create a WebSite or Web Application project and then add a new WebForm. In the WebForm ASPX page add this GridView markup below: 1: <asp:gridview ID="GridView1" runat="server" AutoGenerateColumns="false" onrowdatabound="GridView1_RowDataBound"> 2: <Columns> 3: <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> 4: <asp:TemplateField HeaderText="Header 1"> 5: <ItemTemplate> 6: <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> 7: </ItemTemplate> 8: </asp:TemplateField> 9: <asp:TemplateField HeaderText="Header 2"> 10: <ItemTemplate> 11: <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox> 12: </ItemTemplate> 13: </asp:TemplateField> 14: <asp:TemplateField HeaderText="Header 3"> 15: <ItemTemplate> 16: <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox> 17: </ItemTemplate> 18: </asp:TemplateField> 19: <asp:TemplateField HeaderText="Action"> 20: <ItemTemplate> 21: <asp:LinkButton ID="LinkButton1" runat="server" onclick="LinkButton1_Click" Text="Insert"></asp:LinkButton> 22: </ItemTemplate> 23: </asp:TemplateField> 24: </Columns> 25: </asp:gridview> Then at the code behind source of ASPX page you can add this codes below: 1: private DataTable FillData() { 2: 3: DataTable dt = new DataTable(); 4: DataRow dr = null; 5: 6: //Create DataTable columns 7: dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); 8: 9: //Create Row for each columns 10: dr = dt.NewRow(); 11: dr["RowNumber"] = 1; 12: dt.Rows.Add(dr); 13: 14: dr = dt.NewRow(); 15: dr["RowNumber"] = 2; 16: dt.Rows.Add(dr); 17: 18: dr = dt.NewRow(); 19: dr["RowNumber"] = 3; 20: dt.Rows.Add(dr); 21: 22: dr = dt.NewRow(); 23: dr["RowNumber"] = 4; 24: dt.Rows.Add(dr); 25: 26: dr = dt.NewRow(); 27: dr["RowNumber"] = 5; 28: dt.Rows.Add(dr); 29: 30: //Store the DataTable in ViewState for future reference 31: ViewState["CurrentTable"] = dt; 32: 33: return dt; 34: 35: } 36: 37: private void BindGridView(DataTable dtSource) { 38: GridView1.DataSource = dtSource; 39: GridView1.DataBind(); 40: } 41: 42: private DataRow InsertRow(DataTable dtSource, string value) { 43: DataRow dr = dtSource.NewRow(); 44: dr["RowNumber"] = value; 45: return dr; 46: } 47: //private DataRow DeleteRow(DataTable dtSource, 48: 49: protected void Page_Load(object sender, EventArgs e) { 50: if (!IsPostBack) { 51: BindGridView(FillData()); 52: } 53: } 54: 55: protected void LinkButton1_Click(object sender, EventArgs e) { 56: LinkButton lb = (LinkButton)sender; 57: GridViewRow row = (GridViewRow)lb.NamingContainer; 58: DataTable dtCurrentData = (DataTable)ViewState["CurrentTable"]; 59: if (lb.Text == "Insert") { 60: //Insert new row below the selected row 61: dtCurrentData.Rows.InsertAt(InsertRow(dtCurrentData, row.Cells[0].Text + "-sub"), row.RowIndex + 1); 62: 63: } 64: else { 65: //Delete selected sub row 66: dtCurrentData.Rows.RemoveAt(row.RowIndex); 67: } 68: 69: BindGridView(dtCurrentData); 70: ViewState["CurrentTable"] = dtCurrentData; 71: } 72: 73: protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { 74: if (e.Row.RowType == DataControlRowType.DataRow) { 75: if (e.Row.Cells[0].Text.Contains("-sub")) { 76: ((LinkButton)e.Row.FindControl("LinkButton1")).Text = "Delete"; 77: } 78: } 79: } As you can see the code above is pretty straight forward and self explainatory but just to give you a short explaination the code above is composed of three (3) private methods which are the FillData(), BindGridView and InsertRow(). The FillData() method is a method that returns a DataTable and basically creates a dummy data in the DataTable to be used as the GridView DataSource. You can replace the code in that method if you want to use actual data from database but for the purpose of this example I just fill the DataTable with a dummy data on it. The BindGridVew is a method that handles the actual binding of GridVew. The InsertRow() is a method that returns a DataRow. This method handles the insertion of the sub row. Now in the LinkButton OnClick event, we casted the sender to a LinkButton to determine the specific object that fires up the event and get the row values. We then reference the Data from ViewState to get the current data that is being used in the GridView. If the LinkButton text is "Insert" then we will insert new row to the DataSource ( in this case the DataTable) based on the rowIndex if not then Delete the sub row that was added. Here are some screen shots of the output below: On initial load: After inserting a sub row: That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,C#,GridView

Read the article

Running ODI 11gR1 Standalone Agent as a Windows Service

- by fx.nicolas

ODI 11gR1 introduces the capability to use OPMN to start and protect agent processes as services. Setting up the OPMN agent is covered in the following post and extensively in the ODI Installation Guide. Unfortunately, OPMN is not installed along with ODI, and ODI 10g users who are really at ease with the old Java Wrapper are a little bit puzzled by OPMN, and ask: "How can I simply set up the agent as a service?". Well... although the Tanuki Service Wrapper is no longer available for free, and the agentservice.bat script lost, you can switch to another service wrapper for the same result. For example, Yet Another Java Service Wrapper (YAJSW) is a good candidate. To configure a standalone agent with YAJSW: download YAJSW Uncompress the zip to a folder (called %YAJSW% in this example) Configure, start and test your standalone agent. Make sure that this agent is loaded with all the required libraries and drivers, as the service will not load dynamically the drivers added subsequently in the /drivers directory. Retrieve the PID of the agent process: Open Task Manager. Select View Select Columns Select the PID (Process Identifier) column, then click OK In the list of processes, find the java.exe process corresponding to your agent, and note its PID. Open a command line prompt in %YAJSW%/bat and run: genConfig.bat <your_pid> This command generates a wrapper configuration file for the agent. This file is called %YAJSW%/conf/wrapper.conf. Stop your agent. Edit the wrapper.conf file and modify the configuration of your service. For example, modify the display name and description of the service as shown in the example below. Important: Make sure to escape the commas in the ODI encoded passwords with a backslash! In the example below, the ODI_SUPERVISOR_ENCODED_PASS contained a comma character which had to be prefixed with a backslash. # Title to use when running as a console wrapper.console.title=\"AGENT\" #******************************************************************** # Wrapper Windows Service and Posix Daemon Properties #******************************************************************** # Name of the service wrapper.ntservice.name=AGENT_113 # Display name of the service wrapper.ntservice.displayname=ODI Agent # Description of the service wrapper.ntservice.description=Oracle Data Integrator Agent 11gR3 (11.1.1.3.0) ... # Escape the comma in the password with a backslash. wrapper.app.parameter.7 = -ODI_SUPERVISOR_ENCODED_PASS=fJya.vR5kvNcu9TtV\,jVZEt Execute your wrapped agent as console by calling in the command line prompt: runConsole.bat Check that your agent is running, and test it again.This command starts the agent with the configuration but does not install it yet as a service. To Install the agent as service call installService.bat From that point, you can view, start and stop the agent via the windows services. Et voilà ! Two final notes: - To modify the agent configuration, you must uninstall/reinstall the service. For this purpose, run the uninstallService.bat to uninstall it and play again the process above. - To be able to uninstall the agent service, you should keep a backup of the wrapper.conf file. This is particularly important when starting several services with the wrapper.

Read the article

ASP.NET Web API - Screencast series Part 3: Delete and Update

- by Jon Galloway

We're continuing a six part series on ASP.NET Web API that accompanies the getting started screencast series. This is an introductory screencast series that walks through from File / New Project to some more advanced scenarios like Custom Validation and Authorization. The screencast videos are all short (3-5 minutes) and the sample code for the series is both available for download and browsable online. I did the screencasts, but the samples were written by the ASP.NET Web API team. In Part 1 we looked at what ASP.NET Web API is, why you'd care, did the File / New Project thing, and did some basic HTTP testing using browser F12 developer tools. In Part 2 we started to build up a sample that returns data from a repository in JSON format via GET methods. In Part 3, we'll start to modify data on the server using DELETE and POST methods. So far we've been looking at GET requests, and the difference between standard browsing in a web browser and navigating an HTTP API isn't quite as clear. Delete is where the difference becomes more obvious. With a "traditional" web page, to delete something'd probably have a form that POSTs a request back to a controller that needs to know that it's really supposed to be deleting something even though POST was really designed to create things, so it does the work and then returns some HTML back to the client that says whether or not the delete succeeded. There's a good amount of plumbing involved in communicating between client and server. That gets a lot easier when we just work with the standard HTTP DELETE verb. Here's how the server side code works: public Comment DeleteComment(int id) { Comment comment; if (!repository.TryGet(id, out comment)) throw new HttpResponseException(HttpStatusCode.NotFound); repository.Delete(id); return comment; } If you look back at the GET /api/comments code in Part 2, you'll see that they start the exact same because the use cases are kind of similar - we're looking up an item by id and either displaying it or deleting it. So the only difference is that this method deletes the comment once it finds it. We don't need to do anything special to handle cases where the id isn't found, as the same HTTP 404 handling works fine here, too. Pretty much all "traditional" browsing uses just two HTTP verbs: GET and POST, so you might not be all that used to DELETE requests and think they're hard. Not so! Here's the jQuery method that calls the /api/comments with the DELETE verb: $(function() { $("a.delete").live('click', function () { var id = $(this).data('comment-id'); $.ajax({ url: "/api/comments/" + id, type: 'DELETE', cache: false, statusCode: { 200: function(data) { viewModel.comments.remove( function(comment) { return comment.ID == data.ID; } ); } } }); return false; }); }); So in order to use the DELETE verb instead of GET, we're just using $.ajax() and setting the type to DELETE. Not hard. But what's that statusCode business? Well, an HTTP status code of 200 is an OK response. Unless our Web API method sets another status (such as by throwing the Not Found exception we saw earlier), the default response status code is HTTP 200 - OK. That makes the jQuery code pretty simple - it calls the Delete action, and if it gets back an HTTP 200, the server-side delete was successful so the comment can be deleted. Adding a new comment uses the POST verb. It starts out looking like an MVC controller action, using model binding to get the new comment from JSON data into a c# model object to add to repository, but there are some interesting differences. public HttpResponseMessage<Comment> PostComment(Comment comment) { comment = repository.Add(comment); var response = new HttpResponseMessage<Comment>(comment, HttpStatusCode.Created); response.Headers.Location = new Uri(Request.RequestUri, "/api/comments/" + comment.ID.ToString()); return response; } First off, the POST method is returning an HttpResponseMessage<Comment>. In the GET methods earlier, we were just returning a JSON payload with an HTTP 200 OK, so we could just return the model object and Web API would wrap it up in an HttpResponseMessage with that HTTP 200 for us (much as ASP.NET MVC controller actions can return strings, and they'll be automatically wrapped in a ContentResult). When we're creating a new comment, though, we want to follow standard REST practices and return the URL that points to the newly created comment in the Location header, and we can do that by explicitly creating that HttpResposeMessage and then setting the header information. And here's a key point - by using HTTP standard status codes and headers, our response payload doesn't need to explain any context - the client can see from the status code that the POST succeeded, the location header tells it where to get it, and all it needs in the JSON payload is the actual content. Note: This is a simplified sample. Among other things, you'll need to consider security and authorization in your Web API's, and especially in methods that allow creating or deleting data. We'll look at authorization in Part 6. As for security, you'll want to consider things like mass assignment if binding directly to model objects, etc. In Part 4, we'll extend on our simple querying methods form Part 2, adding in support for paging and querying.

Read the article

Great Customer Service Example

- by MightyZot

A few days ago I wrote about what I consider a poor customer service interaction with TiVo, a company that I have been faithful to for the past 12 years or so. In that post I talked about how they helped me, but I felt like I was doing something wrong at the end of the call – when in reality I was just following through with an offer that TiVo made possible through my cable company. Today I had a wonderful customer service interaction with American Express, another company that I have been loyal to for many years.(I am a Gold Card member.) I like my Amex card because I can use it for big purchases and it forces me to pay them off at the end of the month. Well, the reality is that I’m not always so good at doing that, so sometimes my payments are over a couple of months. :) A few days ago I received an email from “American Express” fraud detection. The email stated that I should call a toll free number and have the last four digits of my card handy. I grew up during the BBS era with some creative and somewhat mischievous friends. I’ve learned to be extremely cautious with regard to my online life! So, I did what you would expect…I sent them a nice reply that said “Go screw yourself.” For the past couple of days someone has been trying to call me and I assumed it was the same prankster trying to get the last four digits of my card. The last caller left a message indicating that they were from American Express and they wanted to talk to me about my card. After looking up their customer service numbers on the www.americanexpress.com web site, I called and was put through to the fraud detection group. The rep explained that there were some charges on my wife’s card that did not fit our purchase profile. She went through each charge and, for the most part, they looked like charges my wife may have made. My wife had asked to use the card for some Christmas shopping during the same timeframe as the charges. The American Express rep very politely explained that these looked out of character to her. She continued through the charges. She listed a charge for $160 – at this point my adrenaline started kicking in. My wife said she was going to charge about $25 or $30 dollars, not $160. Next, the rep listed a charge for over $1200. Uh oh!! Now I know that my account has been compromised. I informed the rep that we definitely did not make those charges. She replied with, “that’s ok Mr Pope, we declined those charges as well as some others.” We went through the pending charges and there were a couple more that were questionable. The rep very patiently waited while I called my wife on my office phone to verify the charges. Sure enough, my wife had not ordered anything from Netflix or purchased anything with Yahoo Wallet! “No problem Mr Pope, we will remove those charges as well.” “We are going to cancel your wife’s card and send her a new one. She will receive it by 7pm tomorrow via Federal Express. Please watch your statements over the next couple of months. If you notice anything fishy, give us a call and we will take care of it for you.” (Wow, I’m thinking to myself!) “Is there anything else I can help you with Mr Pope?” “Nope, thank you very much for catching this so early and declining those charges!”, I said smiling. Apparently she could hear me smiling on the other end of the phone line because she replied with “keep smiling Mr Pope and have a good rest of your week.” Now THAT’s customer service! Thank you American Express!!! I shall remain an ever faithful customer. Interesting…

Read the article

Many Stack Overflow users' pages have no Google PageRank and they are not indexed, why?

- by Marco Demaio

If you go to my user page on Stack Overflow and you check it with the Google Toolbar, you can see it has no PageRank at all (this does happen for almost any user page, even people with much higher reputation, the only exceptions seem to be the users in page 1, and some other users they have PR). My user page's Page Rank is not only zero, but not calculated at all. When PR is 0 or less than 1, but calculated the Google bar shows white, but when the PR is not even calculated like in my user page the Google bar shows in grey. I further more discovered that my user page is NOT EVEN INDEXED on Google, simple test is searching on Google for the exact page url: "http://stackoverflow.com/users/260080/marco-demaio" and you will see no result. The question is how can this be??? This is really weird to me because of the following reason: If you search on Google for "Marco Demaio" on Stack Overflow only (you can do this by searching "site:stackoverflow.com Marco Demaio") the search result shows hundreds of 'asking/answering questions' pages where I was 'tagged'!!! Let's check one of these: the 1st one that appears now (shows one of the question I asked). We can be sure this page is indexed in Google because comes out in a search. Moreover, its PR is calculated. It's probably nearly zero. Still, some PR flows there, the PR bar is not grey, but white: The page shown above has got links to my own user page. I checked the source code of the page shown above and the links are not hidden or set with a rel="nofollow", moreover I can't see any meta character excluding the links on the page from being followed. So what's happening? Why Google does not see my user page at all. Did Stack Overflow do something to achieve this? If yes what did they do? Any explanation really appreciates (as always). P.S. obviously I checked also the code of my user page, but I could not find meta tags excluding Google search for the page. P.S. 2 in a desperate adventure I also checked Stack Overflow's robots.txt but it does not seem to exclude user pages. UPDATE 1 following up on some answers, I did some more research. Excluding for a while the PR problem (since PR is not science), and looking only at the user page on Stack Overflow NOT BEING INDEXED problem: pages do not seem to be indexed by Google because of the user reputation, this user for instance has got NOW 200 points less reputation than me and his page is indexed (while mine not). It does not seem even to be connected with months you have been on Stack Overflow, this user (almost my same reputation) has been there for 3 months only and his page is indexed (while mine not and I have been a user for 7 months). It's bizarre! UPDATE February/2011 As of today, the page got indexed by Google at least when you search for "site:stackoverflow.com Marco Demaio" it's the 1st page. The amazing thing is that it has still got NO PageRank at all: Google toolbar states loud and clear "No PageRank information available". It's odd!

Read the article

Integrate Microsoft Translator into your ASP.Net application

- by sreejukg

In this article I am going to explain how easily you can integrate the Microsoft translator API to your ASP.Net application. Why we need a translation API? Once you published a website, you are opening a channel to the global audience. So making the web content available only in one language doesn’t cover all your audience. Especially when you are offering products/services it is important to provide contents in multiple languages. Users will be more comfortable when they see the content in their native language. How to achieve this, hiring translators and translate the content to all your user’s languages will cost you lot of money, and it is not a one time job, you need to translate the contents on the go. What is the alternative, we need to look for machine translation. Thankfully there are some translator engines available that gives you API level access, so that automatically you can translate the content and display to the user. Microsoft Translator API is an excellent set of web service APIs that allows developers to use the machine translation technology in their own applications. The Microsoft Translator API is offered through Windows Azure market place. In order to access the data services published in Windows Azure market place, you need to have an account. The registration process is simple, and it is common for all the services offered through the market place. Last year I had written an article about Bing Search API, where I covered the registration process. You can refer the article here. http://weblogs.asp.net/sreejukg/archive/2012/07/04/integrate-bing-search-api-to-asp-net-application.aspx Once you registered with Windows market place, you will get your APP ID. Now you can visit the Microsoft Translator page and click on the sign up button. http://datamarket.azure.com/dataset/bing/microsofttranslator As you can see, there are several options available for you to subscribe. There is a free version available, great. Click on the sign up button under the package that suits you. Clicking on the sign up button will bring the sign up form, where you need to agree on the terms and conditions and go ahead. You need to have a windows live account in order to sign up for any service available in Windows Azure market place. Once you signed up successfully, you will receive the thank you page. You can download the C# class library from here so that the integration can be made without writing much code. The C# file name is TranslatorContainer.cs. At any point of time, you can visit https://datamarket.azure.com/account/datasets to see the applications you are subscribed to. Click on the Use link next to each service will give you the details of the application. You need to not the primary account key and URL of the service to use in your application. Now let us start our ASP.Net project. I have created an empty ASP.Net web application using Visual Studio 2010 and named it Translator Sample, any name could work. By default, the web application in solution explorer looks as follows. Now right click the project and select Add -> Existing Item and then browse to the TranslatorContainer.cs. Now let us create a page where user enter some data and perform the translation. I have added a new web form to the project with name Translate.aspx. I have placed one textbox control for user to type the text to translate, the dropdown list to select the target language, a label to display the translated text and a button to perform the translation. For the dropdown list I have selected some languages supported by Microsoft translator. You can get all the supported languages with their codes from the below link. http://msdn.microsoft.com/en-us/library/hh456380.aspx The form looks as below in the design surface of Visual Studio. All the class libraries in the windows market place requires reference to System.Data.Services.Client, let us add the reference. You can find the documentation of how to use the downloaded class library from the below link. http://msdn.microsoft.com/en-us/library/gg312154.aspx Let us evaluate the translatorContainer.cs file. You can refer the code and it is self-explanatory. Note the namespace name used (Microsoft), you need to add the namespace reference to your page. I have added the following event for the translate button. The code is self-explanatory. You are creating an object of TranslatorContainer class by passing the translation service URL. Now you need to set credentials for your Translator container object, which will be your account key. The TranslatorContainer support a method that accept a text input, source language and destination language and returns DataServiceQuery<Translation>. Let us see this working, I just ran the application and entered Good Morning in the Textbox. Selected target language and see the output as follows. It is easy to build great translator applications using Microsoft translator API, and there is a reasonable amount of translation you can perform in your application for free. For enterprises, you can subscribe to the appropriate package and make your application multi-lingual.

Read the article

MVC 2 jQuery Client-side Validation

- by nmarun

Well, I watched Phil Haack’s show What's New in Microsoft ASP.NET MVC 2 and was impressed about the client-side validation (starts at 17:45) that MVC 2 offers. I tried creating the same, but Phil does not show what .js files need to be included and also I was not able to find the source code for the application that he used. In order to find out the required JavaScript file references, I added all of the files in my application to the page and ran it. Of course it worked, but this is definitely not an optimum solution. By removing one at a time and testing the app, I’ve short-listed the following ones: 1: <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script 2: <script src="../../Scripts/MicrosoftAjax.js" type="text/javascript"></script> 3: <script src="../../Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> Now, a little about the feature itself. Say, I’m working with a Book application so my model will look something like: 1: public class Book 2: { 3: [HiddenInput(DisplayValue = false)] 4: public int BookId { get; set; } 5: 6: [DisplayName("Book Title")] 7: [Required(ErrorMessage = "Book title is required")] 8: [StringLength(20, ErrorMessage = "Must be under 20 characters")] 9: public string Title { get; set; } 10: 11: [Required(ErrorMessage = "Author is required")] 12: [StringLength(40, ErrorMessage = "Must be under 40 characters")] 13: public string Author { get; set; } 14: 15: public decimal Price { get; set; } 16: 17: [DisplayName("ISBN")] 18: [StringLength(13, ErrorMessage = "Must be 13 characters")] 19: public string Isbn { get; set; } 20: } This ensures that the data passed will be validated upon post. But what would happen if you add the line (along with the above mentioned .js files): 1: <% Html.EnableClientValidation(); %> Now, this acts as ‘on-the-fly’ or ‘real-time’ validation. Now, when the user types 20 characters for the Title, the error shows up right on the 21st character. Beautiful… and you do not have to create the JavaScript function(s) for this. They’re auto-magically created for you. (Doing a ‘View Source’ on the browser page shows you the JavaScript logic that goes on behind the scenes). I bumped into another post that shows how .net 4 allows us to create custom validation attributes: Dynamic Range validation in MVC 2. This will help us attach virtually any business logic to the model itself. Please see the source code I’ve worked with.

Read the article

GitHub Integration in Windows Azure Web Site

- by Shaun

Microsoft had just announced an update for Windows Azure Web Site (a.k.a. WAWS). There are four major features added in WAWS which are free scaling mode, GitHub integration, custom domain and multi branches. Since I ‘m working in Node.js and I would like to have my code in GitHub and deployed automatically to my Windows Azure Web Site once I sync my code, this feature is a big good news to me. It’s very simple to establish the GitHub integration in WAWS. First we need a clean WAWS. In its dashboard page click “Set up Git publishing”. Currently WAWS doesn’t support to change the publish setting. So if you have an existing WAWS which published by TFS or local Git then you have to create a new WAWS and set the Git publishing. Then in the deployment page we can see now WAWS supports three Git publishing modes: - Push my local files to Windows Azure: In this mode we will create a new Git repository on local machine and commit, publish our code to Windows Azure through Git command or some GUI. - Deploy from my GitHub project: In this mode we will have a Git repository created on GitHub. Once we publish our code to GitHub Windows Azure will download the code and trigger a new deployment. - Deploy from my CodePlex project: Similar as the previous one but our code would be in CodePlex repository. Now let’s back to GitHub and create a new publish repository. Currently WAWS GitHub integration only support for public repositories. The private repositories support will be available in several weeks. We can manage our repositories in GitHub website. But as a windows geek I prefer the GUI tool. So I opened the GitHub for Windows, login with my GitHub account and select the “github” category, click the “add” button to create a new repository on GitHub. You can download the GitHub for Windows here. I specified the repository name, description, local repository, do not check the “Keep this code private”. After few seconds it will create a new repository on GitHub and associate it to my local machine in that folder. We can find this new repository in GitHub website. And in GitHub for Windows we can also find the local repository by selecting the “local” category. Next, we need to associate this repository with our WAWS. Back to windows developer portal, open the “Deploy from my GitHub project” in the deployment page and click the “Authorize Windows Azure” link. It will bring up a new windows on GitHub which let me allow the Windows Azure application can access your repositories. After we clicked “Allow”, windows azure will retrieve all my GitHub public repositories and let me select which one I want to integrate to this WAWS. I selected the one I had just created in GitHub for Windows. So that’s all. We had completed the GitHub integration configuration. Now let’s have a try. In GitHub for Windows, right click on this local repository and click “open in explorer”. Then I added a simple HTML file. 1: <html> 2: <head> 3: </head> 4: <body> 5: <h1> 6: I came from GitHub, WOW! 7: </h1> 8: </body> 9: </html> Save it and back to GitHub for Windows, commit this change and publish. This will upload our changes to GitHub, and Windows Azure will detect this update and trigger a new deployment. If we went back to azure developer portal we can find the new deployment. And our commit message will be shown as the deployment description as well. And here is the page deployed to WAWS. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

MySQL is running VERY slow

- by user1032531

I have two servers: a VPS and a laptop. I recently re-built both of them, and MySQL is running about 20 times slower on the laptop. Both servers used to run CentOS 5.8 and I think MySQL 5.1, and the laptop used to do great so I do not think it is the hardware. For the VPS, my provider installed CentOS 6.4, and then I installed MySQL 5.1.69 using yum with the CentOS repo. For the laptop, I installed CentOS 6.4 basic server and then installed MySQL 5.1.69 using yum with the CentOS repo. my.cnf for both servers are identical, and I have shown below. For both servers, I've also included below the output from SHOW VARIABLES; as well as output from sysbench, file system information, and cpu information. I have tried adding skip-name-resolve, but it didn't help. The matrix below shows the SHOW VARIABLES output from both servers which is different. Again, MySQL was installed the same way, so I do not know why it is different, but it is and I think this might be why the laptop is executing MySQL so slowly. Why is the laptop running MySQL slowly, and how do I fix it? Differences between SHOW VARIABLES on both servers +---------------------------+-----------------------+-------------------------+ | Variable | Value-VPS | Value-Laptop | +---------------------------+-----------------------+-------------------------+ | hostname | vps.site1.com | laptop.site2.com | | max_binlog_cache_size | 4294963200 | 18446744073709500000 | | max_seeks_for_key | 4294967295 | 18446744073709500000 | | max_write_lock_count | 4294967295 | 18446744073709500000 | | myisam_max_sort_file_size | 2146435072 | 9223372036853720000 | | myisam_mmap_size | 4294967295 | 18446744073709500000 | | plugin_dir | /usr/lib/mysql/plugin | /usr/lib64/mysql/plugin | | pseudo_thread_id | 7568 | 2 | | system_time_zone | EST | PDT | | thread_stack | 196608 | 262144 | | timestamp | 1372252112 | 1372252046 | | version_compile_machine | i386 | x86_64 | +---------------------------+-----------------------+-------------------------+ my.cnf for both servers [root@server1 ~]# cat /etc/my.cnf [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid innodb_strict_mode=on sql_mode=TRADITIONAL # sql_mode=STRICT_TRANS_TABLES,NO_ZERO_DATE,NO_ZERO_IN_DATE character-set-server=utf8 collation-server=utf8_general_ci log=/var/log/mysqld_all.log [root@server1 ~]# VPS SHOW VARIABLES Info Same as Laptop shown below but changes per above matrix (removed to allow me to be under the 30000 characters as required by ServerFault) Laptop SHOW VARIABLES Info auto_increment_increment 1 auto_increment_offset 1 autocommit ON automatic_sp_privileges ON back_log 50 basedir /usr/ big_tables OFF binlog_cache_size 32768 binlog_direct_non_transactional_updates OFF binlog_format STATEMENT bulk_insert_buffer_size 8388608 character_set_client utf8 character_set_connection utf8 character_set_database latin1 character_set_filesystem binary character_set_results utf8 character_set_server latin1 character_set_system utf8 character_sets_dir /usr/share/mysql/charsets/ collation_connection utf8_general_ci collation_database latin1_swedish_ci collation_server latin1_swedish_ci completion_type 0 concurrent_insert 1 connect_timeout 10 datadir /var/lib/mysql/ date_format %Y-%m-%d datetime_format %Y-%m-%d %H:%i:%s default_week_format 0 delay_key_write ON delayed_insert_limit 100 delayed_insert_timeout 300 delayed_queue_size 1000 div_precision_increment 4 engine_condition_pushdown ON error_count 0 event_scheduler OFF expire_logs_days 0 flush OFF flush_time 0 foreign_key_checks ON ft_boolean_syntax + -><()~*:""&| ft_max_word_len 84 ft_min_word_len 4 ft_query_expansion_limit 20 ft_stopword_file (built-in) general_log OFF general_log_file /var/run/mysqld/mysqld.log group_concat_max_len 1024 have_community_features YES have_compress YES have_crypt YES have_csv YES have_dynamic_loading YES have_geometry YES have_innodb YES have_ndbcluster NO have_openssl DISABLED have_partitioning YES have_query_cache YES have_rtree_keys YES have_ssl DISABLED have_symlink DISABLED hostname server1.site2.com identity 0 ignore_builtin_innodb OFF init_connect init_file init_slave innodb_adaptive_hash_index ON innodb_additional_mem_pool_size 1048576 innodb_autoextend_increment 8 innodb_autoinc_lock_mode 1 innodb_buffer_pool_size 8388608 innodb_checksums ON innodb_commit_concurrency 0 innodb_concurrency_tickets 500 innodb_data_file_path ibdata1:10M:autoextend innodb_data_home_dir innodb_doublewrite ON innodb_fast_shutdown 1 innodb_file_io_threads 4 innodb_file_per_table OFF innodb_flush_log_at_trx_commit 1 innodb_flush_method innodb_force_recovery 0 innodb_lock_wait_timeout 50 innodb_locks_unsafe_for_binlog OFF innodb_log_buffer_size 1048576 innodb_log_file_size 5242880 innodb_log_files_in_group 2 innodb_log_group_home_dir ./ innodb_max_dirty_pages_pct 90 innodb_max_purge_lag 0 innodb_mirrored_log_groups 1 innodb_open_files 300 innodb_rollback_on_timeout OFF innodb_stats_method nulls_equal innodb_stats_on_metadata ON innodb_support_xa ON innodb_sync_spin_loops 20 innodb_table_locks ON innodb_thread_concurrency 8 innodb_thread_sleep_delay 10000 innodb_use_legacy_cardinality_algorithm ON insert_id 0 interactive_timeout 28800 join_buffer_size 131072 keep_files_on_create OFF key_buffer_size 8384512 key_cache_age_threshold 300 key_cache_block_size 1024 key_cache_division_limit 100 language /usr/share/mysql/english/ large_files_support ON large_page_size 0 large_pages OFF last_insert_id 0 lc_time_names en_US license GPL local_infile ON locked_in_memory OFF log OFF log_bin OFF log_bin_trust_function_creators OFF log_bin_trust_routine_creators OFF log_error /var/log/mysqld.log log_output FILE log_queries_not_using_indexes OFF log_slave_updates OFF log_slow_queries OFF log_warnings 1 long_query_time 10.000000 low_priority_updates OFF lower_case_file_system OFF lower_case_table_names 0 max_allowed_packet 1048576 max_binlog_cache_size 18446744073709547520 max_binlog_size 1073741824 max_connect_errors 10 max_connections 151 max_delayed_threads 20 max_error_count 64 max_heap_table_size 16777216 max_insert_delayed_threads 20 max_join_size 18446744073709551615 max_length_for_sort_data 1024 max_long_data_size 1048576 max_prepared_stmt_count 16382 max_relay_log_size 0 max_seeks_for_key 18446744073709551615 max_sort_length 1024 max_sp_recursion_depth 0 max_tmp_tables 32 max_user_connections 0 max_write_lock_count 18446744073709551615 min_examined_row_limit 0 multi_range_count 256 myisam_data_pointer_size 6 myisam_max_sort_file_size 9223372036853727232 myisam_mmap_size 18446744073709551615 myisam_recover_options OFF myisam_repair_threads 1 myisam_sort_buffer_size 8388608 myisam_stats_method nulls_unequal myisam_use_mmap OFF net_buffer_length 16384 net_read_timeout 30 net_retry_count 10 net_write_timeout 60 new OFF old OFF old_alter_table OFF old_passwords OFF open_files_limit 1024 optimizer_prune_level 1 optimizer_search_depth 62 optimizer_switch index_merge=on,index_merge_union=on,index_merge_sort_union=on,index_merge_intersection=on pid_file /var/run/mysqld/mysqld.pid plugin_dir /usr/lib64/mysql/plugin port 3306 preload_buffer_size 32768 profiling OFF profiling_history_size 15 protocol_version 10 pseudo_thread_id 3 query_alloc_block_size 8192 query_cache_limit 1048576 query_cache_min_res_unit 4096 query_cache_size 0 query_cache_type ON query_cache_wlock_invalidate OFF query_prealloc_size 8192 rand_seed1 rand_seed2 range_alloc_block_size 4096 read_buffer_size 131072 read_only OFF read_rnd_buffer_size 262144 relay_log relay_log_index relay_log_info_file relay-log.info relay_log_purge ON relay_log_space_limit 0 report_host report_password report_port 3306 report_user rpl_recovery_rank 0 secure_auth OFF secure_file_priv server_id 0 skip_external_locking ON skip_name_resolve OFF skip_networking OFF skip_show_database OFF slave_compressed_protocol OFF slave_exec_mode STRICT slave_load_tmpdir /tmp slave_max_allowed_packet 1073741824 slave_net_timeout 3600 slave_skip_errors OFF slave_transaction_retries 10 slow_launch_time 2 slow_query_log OFF slow_query_log_file /var/run/mysqld/mysqld-slow.log socket /var/lib/mysql/mysql.sock sort_buffer_size 2097144 sql_auto_is_null ON sql_big_selects ON sql_big_tables OFF sql_buffer_result OFF sql_log_bin ON sql_log_off OFF sql_log_update ON sql_low_priority_updates OFF sql_max_join_size 18446744073709551615 sql_mode sql_notes ON sql_quote_show_create ON sql_safe_updates OFF sql_select_limit 18446744073709551615 sql_slave_skip_counter sql_warnings OFF ssl_ca ssl_capath ssl_cert ssl_cipher ssl_key storage_engine MyISAM sync_binlog 0 sync_frm ON system_time_zone PDT table_definition_cache 256 table_lock_wait_timeout 50 table_open_cache 64 table_type MyISAM thread_cache_size 0 thread_handling one-thread-per-connection thread_stack 262144 time_format %H:%i:%s time_zone SYSTEM timed_mutexes OFF timestamp 1372254399 tmp_table_size 16777216 tmpdir /tmp transaction_alloc_block_size 8192 transaction_prealloc_size 4096 tx_isolation REPEATABLE-READ unique_checks ON updatable_views_with_limit YES version 5.1.69 version_comment Source distribution version_compile_machine x86_64 version_compile_os redhat-linux-gnu wait_timeout 28800 warning_count 0 VPS Sysbench Info [root@vps ~]# cat sysbench.txt sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 8 Doing OLTP test. Running mixed OLTP test Doing read-only test Using Special distribution (12 iterations, 1 pct of values are returned in 75 pct cases) Using "BEGIN" for starting transactions Using auto_inc on the id column Threads started! Time limit exceeded, exiting... (last message repeated 7 times) Done. OLTP test statistics: queries performed: read: 1449966 write: 0 other: 207138 total: 1657104 transactions: 103569 (1726.01 per sec.) deadlocks: 0 (0.00 per sec.) read/write requests: 1449966 (24164.08 per sec.) other operations: 207138 (3452.01 per sec.) Test execution summary: total time: 60.0050s total number of events: 103569 total time taken by event execution: 479.1544 per-request statistics: min: 1.98ms avg: 4.63ms max: 330.73ms approx. 95 percentile: 8.26ms Threads fairness: events (avg/stddev): 12946.1250/381.09 execution time (avg/stddev): 59.8943/0.00 [root@vps ~]# Laptop Sysbench Info [root@server1 ~]# cat sysbench.txt sysbench 0.4.12: multi-threaded system evaluation benchmark Running the test with following options: Number of threads: 8 Doing OLTP test. Running mixed OLTP test Doing read-only test Using Special distribution (12 iterations, 1 pct of values are returned in 75 pct cases) Using "BEGIN" for starting transactions Using auto_inc on the id column Threads started! Time limit exceeded, exiting... (last message repeated 7 times) Done. OLTP test statistics: queries performed: read: 634718 write: 0 other: 90674 total: 725392 transactions: 45337 (755.56 per sec.) deadlocks: 0 (0.00 per sec.) read/write requests: 634718 (10577.78 per sec.) other operations: 90674 (1511.11 per sec.) Test execution summary: total time: 60.0048s total number of events: 45337 total time taken by event execution: 479.4912 per-request statistics: min: 2.04ms avg: 10.58ms max: 85.56ms approx. 95 percentile: 19.70ms Threads fairness: events (avg/stddev): 5667.1250/42.18 execution time (avg/stddev): 59.9364/0.00 [root@server1 ~]# VPS File Info [root@vps ~]# df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/simfs simfs 20971520 16187440 4784080 78% / none tmpfs 6224432 4 6224428 1% /dev none tmpfs 6224432 0 6224432 0% /dev/shm [root@vps ~]# Laptop File Info [root@server1 ~]# df -T Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/vg_server1-lv_root ext4 72383800 4243964 64462860 7% / tmpfs tmpfs 956352 0 956352 0% /dev/shm /dev/sdb1 ext4 495844 60948 409296 13% /boot [root@server1 ~]# VPS CPU Info Removed to stay under the 30000 character limit required by ServerFault Laptop CPU Info [root@server1 ~]# cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping : 13 cpu MHz : 800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 3591.39 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping : 13 cpu MHz : 800.000 cache size : 2048 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida dts tpr_shadow vnmi flexpriority bogomips : 3591.39 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: [root@server1 ~]# EDIT New Info requested by shakalandy [root@localhost ~]# cat /proc/meminfo MemTotal: 2044804 kB MemFree: 761464 kB Buffers: 68868 kB Cached: 369708 kB SwapCached: 0 kB Active: 881080 kB Inactive: 246016 kB Active(anon): 688312 kB Inactive(anon): 4416 kB Active(file): 192768 kB Inactive(file): 241600 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4095992 kB SwapFree: 4095992 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 688428 kB Mapped: 65156 kB Shmem: 4216 kB Slab: 92428 kB SReclaimable: 31260 kB SUnreclaim: 61168 kB KernelStack: 2392 kB PageTables: 28356 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5118392 kB Committed_AS: 1530212 kB VmallocTotal: 34359738367 kB VmallocUsed: 343604 kB VmallocChunk: 34359372920 kB HardwareCorrupted: 0 kB AnonHugePages: 520192 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 8556 kB DirectMap2M: 2078720 kB [root@localhost ~]# ps aux | grep mysql root 2227 0.0 0.0 108332 1504 ? S 07:36 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/localhost.badobe.com.pid mysql 2319 0.1 24.5 1470068 501360 ? Sl 07:36 0:57 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/localhost.badobe.com.err --pid-file=/var/lib/mysql/localhost.badobe.com.pid root 3579 0.0 0.1 201840 3028 pts/0 S+ 07:40 0:00 mysql -u root -p root 13887 0.0 0.1 201840 3036 pts/3 S+ 18:08 0:00 mysql -uroot -px xxxxxxxxxx root 14449 0.0 0.0 103248 840 pts/2 S+ 18:16 0:00 grep mysql [root@localhost ~]# ps aux | grep mysql root 2227 0.0 0.0 108332 1504 ? S 07:36 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/lib/mysql/localhost.badobe.com.pid mysql 2319 0.1 24.5 1470068 501356 ? Sl 07:36 0:57 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/localhost.badobe.com.err --pid-file=/var/lib/mysql/localhost.badobe.com.pid root 3579 0.0 0.1 201840 3028 pts/0 S+ 07:40 0:00 mysql -u root -p root 13887 0.0 0.1 201840 3048 pts/3 S+ 18:08 0:00 mysql -uroot -px xxxxxxxxxx root 14470 0.0 0.0 103248 840 pts/2 S+ 18:16 0:00 grep mysql [root@localhost ~]# vmstat 1 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 742172 76376 371064 0 0 6 6 78 202 2 1 97 1 0 0 0 0 742164 76380 371060 0 0 0 16 191 467 2 1 93 5 0 0 0 0 742164 76380 371064 0 0 0 0 148 388 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 159 418 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 145 380 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 166 429 2 1 97 0 0 1 0 0 742164 76380 371064 0 0 0 0 148 373 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 149 382 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 168 408 2 0 97 0 0 0 0 0 742164 76380 371064 0 0 0 0 165 394 2 1 98 0 0 0 0 0 742164 76380 371064 0 0 0 0 159 354 2 1 98 0 0 0 0 0 742164 76388 371060 0 0 0 16 180 447 2 0 91 6 0 0 0 0 742164 76388 371064 0 0 0 0 143 344 2 1 98 0 0 0 1 0 742784 76416 370044 0 0 28 580 360 678 3 1 74 23 0 1 0 0 744768 76496 367772 0 0 40 1036 437 865 3 1 53 43 0 0 1 0 747248 76596 365412 0 0 48 1224 561 923 3 2 53 43 0 0 1 0 749232 76696 363092 0 0 32 1132 512 883 3 2 52 44 0 0 1 0 751340 76772 361020 0 0 32 1008 472 872 2 1 52 45 0 0 1 0 753448 76840 358540 0 0 36 1088 512 860 2 1 51 46 0 0 1 0 755060 76936 357636 0 0 28 1012 481 922 2 2 52 45 0 0 1 0 755060 77064 357988 0 0 12 896 444 902 2 1 53 45 0 0 1 0 754688 77148 358448 0 0 16 1096 506 1007 1 1 56 42 0 0 2 0 754192 77268 358932 0 0 12 1060 481 957 1 2 53 44 0 0 1 0 753696 77380 359392 0 0 12 1052 512 1025 2 1 55 42 0 0 1 0 751028 77480 359828 0 0 8 984 423 909 2 2 52 45 0 0 1 0 750524 77620 360200 0 0 8 788 367 869 1 2 54 44 0 0 1 0 749904 77700 360664 0 0 8 928 439 924 2 2 55 43 0 0 1 0 749408 77796 361084 0 0 12 976 468 967 1 1 56 43 0 0 1 0 748788 77896 361464 0 0 12 992 453 944 1 2 54 43 0 1 1 0 748416 77992 361996 0 0 12 784 392 868 2 1 52 46 0 0 1 0 747920 78092 362336 0 0 4 896 382 874 1 1 52 46 0 0 1 0 745252 78172 362780 0 0 12 1040 444 923 1 1 56 42 0 0 1 0 744764 78288 363220 0 0 8 1024 448 934 2 1 55 43 0 0 1 0 744144 78408 363668 0 0 8 1000 461 982 2 1 53 44 0 0 1 0 743648 78488 364148 0 0 8 872 443 888 2 1 54 43 0 0 1 0 743152 78548 364468 0 0 16 1020 511 995 2 1 55 43 0 0 1 0 742656 78632 365024 0 0 12 928 431 913 1 2 53 44 0 0 1 0 742160 78728 365468 0 0 12 996 470 955 2 2 54 44 0 1 1 0 739492 78840 365896 0 0 8 988 447 939 1 2 52 46 0 0 1 0 738872 78996 366352 0 0 12 972 442 928 1 1 55 44 0 1 1 0 738244 79148 366812 0 0 8 948 549 1126 2 2 54 43 0 0 1 0 737624 79312 367188 0 0 12 996 456 953 2 2 54 43 0 0 1 0 736880 79456 367660 0 0 12 960 444 918 1 1 53 46 0 0 1 0 736260 79584 368124 0 0 8 884 414 921 1 1 54 44 0 0 1 0 735648 79716 368488 0 0 12 976 450 955 2 1 56 41 0 0 1 0 733104 79840 368988 0 0 12 932 453 918 1 2 55 43 0 0 1 0 732608 79996 369356 0 0 16 916 444 889 1 2 54 43 0 1 1 0 731476 80128 369800 0 0 16 852 514 978 2 2 54 43 0 0 1 0 731244 80252 370200 0 0 8 904 398 870 2 1 55 43 0 1 1 0 730624 80384 370612 0 0 12 1032 447 977 1 2 57 41 0 0 1 0 730004 80524 371096 0 0 12 984 469 941 2 2 52 45 0 0 1 0 729508 80636 371544 0 0 12 928 438 922 2 1 52 46 0 0 1 0 728888 80756 371948 0 0 16 972 439 943 2 1 55 43 0 0 1 0 726468 80900 372272 0 0 8 960 545 1024 2 1 54 43 0 1 1 0 726344 81024 372272 0 0 8 464 490 1057 1 2 53 44 0 0 1 0 726096 81148 372276 0 0 4 328 441 1063 2 1 53 45 0 1 1 0 726096 81256 372292 0 0 0 296 387 975 1 1 53 45 0 0 1 0 725848 81380 372284 0 0 4 332 425 1034 2 1 54 44 0 1 1 0 725848 81496 372300 0 0 4 308 386 992 2 1 54 43 0 0 1 0 725600 81616 372296 0 0 4 328 404 1060 1 1 54 44 0 procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu----- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 1 0 725600 81732 372296 0 0 4 328 439 1011 1 1 53 44 0 0 1 0 725476 81848 372308 0 0 0 316 441 1023 2 2 52 46 0 1 1 0 725352 81972 372300 0 0 4 344 451 1021 1 1 55 43 0 2 1 0 725228 82088 372320 0 0 0 328 427 1058 1 1 54 44 0 1 1 0 724980 82220 372300 0 0 4 336 419 999 2 1 54 44 0 1 1 0 724980 82328 372320 0 0 4 320 430 1019 1 1 54 44 0 1 1 0 724732 82436 372328 0 0 0 388 363 942 2 1 54 44 0 1 1 0 724608 82560 372312 0 0 4 308 419 993 1 2 54 44 0 1 0 0 724360 82684 372320 0 0 0 304 421 1028 2 1 55 42 0 1 0 0 724360 82684 372388 0 0 0 0 158 416 2 1 98 0 0 1 1 0 724236 82720 372360 0 0 0 6464 243 855 3 2 84 12 0 1 0 0 724112 82748 372360 0 0 0 5356 266 895 3 1 84 12 0 2 1 0 724112 82764 372380 0 0 0 3052 221 511 2 2 93 4 0 1 0 0 724112 82796 372372 0 0 0 4548 325 1067 2 2 81 16 0 1 0 0 724112 82816 372368 0 0 0 3240 259 829 3 1 90 6 0 1 0 0 724112 82836 372380 0 0 0 3260 309 822 3 2 88 8 0 1 1 0 724112 82876 372364 0 0 0 4680 326 978 3 1 77 19 0 1 0 0 724112 82884 372380 0 0 0 512 207 508 2 1 95 2 0 1 0 0 724112 82884 372388 0 0 0 0 138 361 2 1 98 0 0 1 0 0 724112 82884 372388 0 0 0 0 158 397 2 1 98 0 0 1 0 0 724112 82884 372388 0 0 0 0 146 395 2 1 98 0 0 2 0 0 724112 82884 372388 0 0 0 0 160 395 2 1 98 0 0 1 0 0 724112 82884 372388 0 0 0 0 163 382 1 1 98 0 0 1 0 0 724112 82884 372388 0 0 0 0 176 422 2 1 98 0 0 1 0 0 724112 82884 372388 0 0 0 0 134 351 2 1 98 0 0 0 0 0 724112 82884 372388 0 0 0 0 190 429 2 1 97 0 0 0 0 0 724104 82884 372392 0 0 0 0 139 358 2 1 98 0 0 0 0 0 724848 82884 372392 0 0 0 4 211 432 2 1 97 0 0 1 0 0 724980 82884 372392 0 0 0 0 166 370 2 1 98 0 0 0 0 0 724980 82884 372392 0 0 0 0 164 397 2 1 98 0 0 ^C [root@localhost ~]#

Read the article

FireFox 6 Super Slow? Cache Settings Corruption

- by Rick Strahl

For those of you that follow me on Twitter, you've probably seen some of my tweets regarding major performance problems I've seen with the install of FireFox 6.0. FireFox 6.0 was released a couple of weeks ago and is treated as a 'force feed' update for FireFox 5.0. I'm not sure what the deal is with this braindead versioning that Mozilla is doing with major version releases coming out, what now every other month? Seriously that's retarded especially given the limited number of new features these releases bring, and the upgrade pain for plug-ins that the major version release causes. Anyway, after the FireFox updater bugged me long enough I finally gave in last week and updated to FireFox 6. Immediately after install I noticed terrible performance. Everything was running at a snail's pace with Web pages loading slowly and most content actually slowly 'painting' the page. A typical sign of content downloading slowly. However these are pages that should be mostly cached on my system and even repeated accesses ran just as slow. Just for a reality check I ran the same sites in Chrome (blazing fast) and IE (fast enough :-)) but FireFox - dog on a stick. Why so slow Boss? While complaining lots of people recommended to ditch FireFox - use Chrome, yada yada yada. Yeah, Chrome is fast and getting better but I have a number of plug-ins that I use in FF that I can't easily give up. So I suffered and started looking around more closely at what was happening. The first thing I noticed when accessing pages was that I continually saw accesses to the Google CDN downloading jQuery and jQuery UI. UI especially is pretty heavy in size and currently I'm in a location with a fairly slow IP connection where large files are a bit of an issue. However, seeing the CDN urls pop up repeatedly raised a flag with me. That stuff should be caching and it looked like each and every hit was reloading these scripts and various images over and over again. Fired up FireBug and sure enough I saw something like this on a repeated hit to my blog: Those two highlights are jquery and the main CSS file for the site and both are being loaded fully and taking a while to load. However, since this page had been loaded before, these items should be cached and show 304 requests instead of the full HTTP requests returning 200 result codes. In short it looked like FireFox was not caching ANY content at all and constantly reloading all page resources. No wonder things were running dog slow. Once I realized what the problem was I took a look in the about:config settings and lo and behold a bunch of the cache settings were set to not cache: In my case ALL the main cache flags were set to false for some reason that I can't figure out. It appears that after the FireFox 6 update these flags somehow mysteriously changed and performance took a nose dive. Switching the .enable flags back to true and resetting all the cache settings tote default reverted performance back to the way it's supposed to be: reasonably fast and snappy as soon as content is cached and accessed again from cache. I try not to muck with the about:config settings much (other than turning off the IPV6 option) but when there are problems access to these features can be really nice. However, I treat this as a last resort so it took me quite some time before I started looking through ALL the settings. This takes a while, not knowing what I was looking for exactly. If Web load performance is slow it's a good idea to check the cache settings. I have no idea what hosed these settings for me - I certainly didn't explicitly set them in about:config and while in FireFox's Options dialog I didn't see any option that would affect global caching like this, so this remains a mystery to me. Anyway, I hope that this is helpful to some, in case some of you end up running into a similar issue.© Rick Strahl, West Wind Technologies, 2005-2011Posted in FireFox Tweet (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

Read the article

Squid + Dans Guardian (simple configuration)

- by The Digital Ninja

I just built a new proxy server and compiled the latest versions of squid and dansguardian. We use basic authentication to select what users are allowed outside of our network. It seems squid is working just fine and accepts my username and password and lets me out. But if i connect to dans guardian, it prompts for username and password and then displays a message saying my username is not allowed to access the internet. Its pulling my username for the error message so i know it knows who i am. The part i get confused on is i thought that part was handled all by squid, and squid is working flawlessly. Can someone please double check my config files and tell me if i'm missing something or there is some new option i must set to get this to work. dansguardian.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/etc/dansguardian/languages' # language to use from languagedir. language = 'ukenglish' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests loglevel = 3 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. on | off logexceptionhits = on # Log File Format # 1 = DansGuardian format 2 = CSV-style format # 3 = Squid Log File Format 4 = Tab delimited logfileformat = 1 # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied # Do NOT change from the default if you are not using the cgi. # accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # Default is enabled but to go back to the original standard mode dissable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # 0 = off # 1 = on (default) usecustombannedimage = 1 custombannedimagefile = '/etc/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. filtergroups = 1 filtergroupslist = '/etc/dansguardian/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/bannediplist' exceptioniplist = '/etc/dansguardian/exceptioniplist' banneduserlist = '/etc/dansguardian/banneduserlist' exceptionuserlist = '/etc/dansguardian/exceptionuserlist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive result caching for text URLs # Caches good pages so they don't need to be scanned again # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit urlcachenumber = # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = # Smart and Raw phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # CPU usage can be effectively halved by using setting 0 or 1 # 0 = raw only # 1 = smart only # 2 = both (default) phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case preservecase = 0 # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # 0 = disabled (default) # 1 = enabled hexdecodecontent = 0 # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # 0 = off (default) # 1 = on (Big5 compatible) forcequicksearch = 0 # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter page size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The size is in Kibibytes - eg 2048 = 2Mb # use 0 for no limit maxcontentfiltersize = # Username identification methods (used in logging) # You can have as many methods as you want and not just one. The first one # will be used then if no username is found, the next will be used. # * proxyauth is for when basic proxy authentication is used (no good for # transparent proxying). # * ntlm is for when the proxy supports the MS NTLM authentication # protocol. (Only works with IE5.5 sp1 and later). **NOT IMPLEMENTED** # * ident is for when the others don't work. It will contact the computer # that the connection came from and try to connect to an identd server # and query it for the user owner of the connection. usernameidmethodproxyauth = on usernameidmethodntlm = off # **NOT IMPLEMENTED** usernameidmethodident = off # Preemptive banning - this means that if you have proxy auth enabled and a user accesses # a site banned by URL for example they will be denied straight away without a request # for their user and pass. This has the effect of requiring the user to visit a clean # site first before it knows who they are and thus maybe an admin user. # This is how DansGuardian has always worked but in some situations it is less than # ideal. So you can optionally disable it. Default is on. # As a side effect disabling this makes AD image replacement work better as the mime # type is know. preemptivebanning = on # Misc settings # if on it adds an X-Forwarded-For: <clientip> to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = on # if on it uses the X-Forwarded-For: <clientip> to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # sets the maximum number of processes to sporn to handle the incomming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. maxchildren = 180 # sets the minimum number of processes to sporn to handle the incomming connections. # On large sites you might want to try 32. minchildren = 32 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. minsparechildren = 8 # sets the minimum number of processes to sporn when it runs out # On large sites you might want to try 10. preforkchildren = 10 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. maxsparechildren = 64 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 5000 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off ( defaults to off ) nodaemon = off # Disable logging process # on|off ( defaults to off ) nologger = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # daemonuser = 'nobody' # daemongroup = 'nobody' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off ( defaults to off ) softrestart = off maxcontentramcachescansize = 2000 maxcontentfilecachescansize = 20000 downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' Squid.conf http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? cache deny QUERY acl apache rep_header Server ^Apache #broken_vary_encoding allow apache access_log /squid/var/logs/access.log squid hosts_file /etc/hosts auth_param basic program /squid/libexec/ncsa_auth /squid/etc/userbasic.auth auth_param basic children 5 auth_param basic realm proxy auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl NoAuthNec src <HIDDEN FOR SECURITY> acl BrkRm src <HIDDEN FOR SECURITY> acl Dials src <HIDDEN FOR SECURITY> acl Comps src <HIDDEN FOR SECURITY> acl whsws dstdom_regex -i .opensuse.org .novell.com .suse.com mirror.mcs.an1.gov mirrors.kernerl.org www.suse.de suse.mirrors.tds.net mirrros.usc.edu ftp.ale.org suse.cs.utah.edu mirrors.usc.edu mirror.usc.an1.gov linux.nssl.noaa.gov noaa.gov .kernel.org ftp.ale.org ftp.gwdg.de .medibuntu.org mirrors.xmission.com .canonical.com .ubuntu. acl opensites dstdom_regex -i .mbsbooks.com .bowker.com .usps.com .usps.gov .ups.com .fedex.com go.microsoft.com .microsoft.com .apple.com toolbar.msn.com .contacts.msn.com update.services.openoffice.org fms2.pointroll.speedera.net services.wmdrm.windowsmedia.com windowsupdate.com .adobe.com .symantec.com .vitalbook.com vxn1.datawire.net vxn.datawire.net download.lavasoft.de .download.lavasoft.com .lavasoft.com updates.ls-servers.com .canadapost. .myyellow.com minirick symantecliveupdate.com wm.overdrive.com www.overdrive.com productactivation.one.microsoft.com www.update.microsoft.com testdrive.whoson.com www.columbia.k12.mo.us banners.wunderground.com .kofax.com .gotomeeting.com tools.google.com .dl.google.com .cache.googlevideo.com .gpdl.google.com .clients.google.com cache.pack.google.com kh.google.com maps.google.com auth.keyhole.com .contacts.msn.com .hrblock.com .taxcut.com .merchantadvantage.com .jtv.com .malwarebytes.org www.google-analytics.com dcs.support.xerox.com .dhl.com .webtrendslive.com javadl-esd.sun.com javadl-alt.sun.com .excelsior.edu .dhlglobalmail.com .nessus.org .foxitsoftware.com foxit.vo.llnwd.net installshield.com .mindjet.com .mediascouter.com media.us.elsevierhealth.com .xplana.com .govtrack.us sa.tulsacc.edu .omniture.com fpdownload.macromedia.com webservices.amazon.com acl password proxy_auth REQUIRED acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 631 2001 2005 8731 9001 9080 10000 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port # https, snews 443 563 acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port # unregistered ports 1936-65535 acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 10000 acl Safe_ports port 631 acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT acl UTubeUsers proxy_auth "/squid/etc/utubeusers.list" acl RestrictUTube dstdom_regex -i youtube.com acl RestrictFacebook dstdom_regex -i facebook.com acl FacebookUsers proxy_auth "/squid/etc/facebookusers.list" acl BuemerKEC src 10.10.128.0/24 acl MBSsortnet src 10.10.128.0/26 acl MSNExplorer browser -i MSN acl Printers src <HIDDEN FOR SECURITY> acl SpecialFolks src <HIDDEN FOR SECURITY> # streaming download acl fails rep_mime_type ^.*mms.* acl fails rep_mime_type ^.*ms-hdr.* acl fails rep_mime_type ^.*x-fcs.* acl fails rep_mime_type ^.*x-ms-asf.* acl fails2 urlpath_regex dvrplayer mediastream mms:// acl fails2 urlpath_regex \.asf$ \.afx$ \.flv$ \.swf$ acl deny_rep_mime_flashvideo rep_mime_type -i video/flv acl deny_rep_mime_shockwave rep_mime_type -i ^application/x-shockwave-flash$ acl x-type req_mime_type -i ^application/octet-stream$ acl x-type req_mime_type -i application/octet-stream acl x-type req_mime_type -i ^application/x-mplayer2$ acl x-type req_mime_type -i application/x-mplayer2 acl x-type req_mime_type -i ^application/x-oleobject$ acl x-type req_mime_type -i application/x-oleobject acl x-type req_mime_type -i application/x-pncmd acl x-type req_mime_type -i ^video/x-ms-asf$ acl x-type2 rep_mime_type -i ^application/octet-stream$ acl x-type2 rep_mime_type -i application/octet-stream acl x-type2 rep_mime_type -i ^application/x-mplayer2$ acl x-type2 rep_mime_type -i application/x-mplayer2 acl x-type2 rep_mime_type -i ^application/x-oleobject$ acl x-type2 rep_mime_type -i application/x-oleobject acl x-type2 rep_mime_type -i application/x-pncmd acl x-type2 rep_mime_type -i ^video/x-ms-asf$ acl RestrictHulu dstdom_regex -i hulu.com acl broken dstdomain cms.montgomerycollege.edu events.columbiamochamber.com members.columbiamochamber.com public.genexusserver.com acl RestrictVimeo dstdom_regex -i vimeo.com acl http_port port 80 #http_reply_access deny deny_rep_mime_flashvideo #http_reply_access deny deny_rep_mime_shockwave #streaming files #http_access deny fails #http_reply_access deny fails #http_access deny fails2 #http_reply_access deny fails2 #http_access deny x-type #http_reply_access deny x-type #http_access deny x-type2 #http_reply_access deny x-type2 follow_x_forwarded_for allow localhost acl_uses_indirect_client on log_uses_indirect_client on http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access allow SpecialFolks http_access deny CONNECT !SSL_ports http_access allow whsws http_access allow opensites http_access deny BuemerKEC !MBSsortnet http_access deny BrkRm RestrictUTube RestrictFacebook RestrictVimeo http_access allow RestrictUTube UTubeUsers http_access deny RestrictUTube http_access allow RestrictFacebook FacebookUsers http_access deny RestrictFacebook http_access deny RestrictHulu http_access allow NoAuthNec http_access allow BrkRm http_access allow FacebookUsers RestrictVimeo http_access deny RestrictVimeo http_access allow Comps http_access allow Dials http_access allow Printers http_access allow password http_access deny !Safe_ports http_access deny SSL_ports !CONNECT http_access allow http_port http_access deny all http_reply_access allow all icp_access allow all access_log /squid/var/logs/access.log squid visible_hostname proxy.site.com forwarded_for off coredump_dir /squid/cache/ #header_access Accept-Encoding deny broken #acl snmppublic snmp_community mysecretcommunity #snmp_port 3401 #snmp_access allow snmppublic all cache_mem 3 GB #acl snmppublic snmp_community mbssquid #snmp_port 3401 #snmp_access allow snmppublic all

Read the article

Html.RenderAction Failed when Validation Failed

- by Shaun

RenderAction method had been introduced when ASP.NET MVC 1.0 released in its MvcFuture assembly and then final announced along with the ASP.NET MVC 2.0. Similar as RenderPartial, the RenderAction can display some HTML markups which defined in a partial view in any parent views. But the RenderAction gives us the ability to populate the data from an action which may different from the action which populating the main view. For example, in Home/Index.aspx we can invoke the Html.RenderPartial(“MyPartialView”) but the data of MyPartialView must be populated by the Index action of the Home controller. If we need the MyPartialView to be shown in Product/Create.aspx we have to copy (or invoke) the relevant code from the Index action in Home controller to the Create action in the Product controller which is painful. But if we are using Html.RenderAction we can tell the ASP.NET MVC from which action/controller the data should be populated. in that way in the Home/Index.aspx and Product/Create.aspx views we just need to call Html.RenderAction(“CreateMyPartialView”, “MyPartialView”) so it will invoke the CreateMyPartialView action in MyPartialView controller regardless from which main view. But in my current project we found a bug when I implement a RenderAction method in the master page to show something that need to connect to the backend data center when the validation logic was failed on some pages. I created a sample application below. Demo application I created an ASP.NET MVC 2 application and here I need to display the current date and time on the master page. I created an action in the Home controller named TimeSlot and stored the current date into ViewDate. This method was marked as HttpGet as it just retrieves some data instead of changing anything. 1: [HttpGet] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } Next, I created a partial view under the Shared folder to display the date and time string. 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<dynamic>" %> 2: 3: <span>Now: <% 1: : ViewData["timeslot"].ToString() %></span> Then at the master page I used Html.RenderAction to display it in front of the logon link. 1: <div id="logindisplay"> 2: <% 1: Html.RenderAction("TimeSlot", "Home"); %> 3: 4: <% 1: Html.RenderPartial("LogOnUserControl"); %> 5: </div> It’s fairly simple and works well when I navigated to any pages. But when I moved to the logon page and click the LogOn button without input anything in username and password the validation failed and my website crashed with the beautiful yellow page. (I really like its color style and fonts…) How ASP.NET MVC executes Html.RenderAction In this example all other pages were rendered successful which means the ASP.NET MVC found the TimeSolt action under the Home controller except this situation. The only different is that when I clicked the LogOn button the browser send an HttpPost request to the server. Is that the reason of this bug? I created another action in Home controller with the same action name but for HttpPost. 1: [HttpPost] 2: [ActionName("TimeSlot")] 3: public ActionResult TimeSlot(object dummy) 4: { 5: return TimeSlot(); 6: } Or, I can use the AcceptVerbsAttribute on the TimeSlot action to let it allow both HttpGet and HttpPost. 1: [AcceptVerbs("GET", "POST")] 2: public ActionResult TimeSlot() 3: { 4: ViewData["timeslot"] = DateTime.Now; 5: return View("TimeSlot"); 6: } And then repeat what I did before and this time it worked well. Why we need the action for HttpPost here as it’s just data retrieving? That is because of how ASP.NET MVC executes the RenderAction method. In the source code of ASP.NET MVC we can see when proforming the RenderAction ASP.NET MVC creates a RequestContext instance from the current RequestContext and created a ChildActionMvcHandler instance which inherits from MvcHandler class. Then the ASP.NET MVC processes the handler through the HttpContext.Server.Execute method. That means it performs the action as a stand-alone request asynchronously and flush the result into the TextWriter which is being used to render the current page. Since when I clicked the LogOn the request was in HttpPost so when ASP.NET MVC processed the ChildActionMvcHandler it would find the action which allow the current request method, which is HttpPost. Then our TimeSlot method in HttpGet would not be matched. Summary In this post I introduced a bug in my currently developing project regards the new Html.RenderAction method provided within ASP.NET MVC 2 when processing a HttpPost request. In ASP.NET MVC world the underlying Http information became more important than in ASP.NET WebForm world. We need to pay more attention on which kind of request it currently created and how ASP.NET MVC processes. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

SEO: many stackoverflow users' pages have got no Google PR and they are not indexed, why?

- by Marco Demaio

If you go to my user page on Stack Overflow and you check it with the Gogle bar you can see has got no PR at all (this does happen for almost any user page, even people with much higher reputation, the only exceptions seem to be the users in page 1, and some other users they have PR). My user page's Page Rank is not only zero, but not calculated at all. When PR is 0 or less than 1, but calculated the Google bar shows white, but when the PR is not even calculated like in my user page the Google bar shows in grey. I further more discovered that my user page is NOT EVEN INDEXED on Google, simple test is searching on Google for the exact page url: "http://stackoverflow.com/users/260080/marco-demaio" and you will see no result. The question is how can this be??? This is really weird to me because of the following reason: If you search on Google for "Marco Demaio" on stackoverflow site only (you can do this by searching "site:stackoverflow.com Marco Demaio") the search result shows hundreds of 'asking/answering questions' pages where I was 'tagged'!!! Let's check one of these: the 1st one that appears now (shows one of the question I asked). We can be sure this page is indexed in Google because comes out in a search moreover its PR is calculated, it's probably nearly zero, but still some PR flows there, the PR bar is not grey, but white: The page shown above has got links to my own user page. I checked the source code of the page shown above and the links are not hidden or set with a rel="nofollow", moreover I can't see any meta character excluding the links on the page from being followed. So what's happening? Why Google does not see my user page at all. Did stackoverflow do something to achieve this? If yes what did they do? Any explantion really appreciates (as always). P.S. obviously I checked also the code of my user page, but I could not find meta tags excluding Google search for the page. P.S. 2 in a desperate adventure I also checked StackOverflow robots but it does not seem to exclude user pages. UPDATE 1 following up on some answers, I did some more research. Excluding for a while the PR problem (since PR is not science), and looking only at the user page on StackOverflow NOT BEING INDEXED problem: pages do not seem to be indexed by Google because of the user reputation, this user for instance has got NOW 200 points less reputation than me and his page is indexed (while mine not). It does not seem even to be connected with months you have been on Stackoverflow, this user (almost my same reputation) has been there for 3 months only and his page is indexed (while mine not and I have been a user for 7 months). It's bizzarre! UPDATE February/2011 As of today the page got indexed by Google at least when you search for "site:stackoverflow.com Marco Demaio" it's the 1st page. The amazing thing is that it has still got NO PageRank at all: Google toolbar states loud and clear "No PageRank information available". It's odd!

Read the article

It was worth the wait… Welcome Oracle GoldenGate 11g Release 2

- by Irem Radzik

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} It certainly was worth the wait to meet Oracle GoldenGate 11gR2, because it is full of new features on multiple fronts. In fact, this release has the longest and strongest list of new features in Oracle GoldenGate’s history. The new release brings GoldenGate closer to the Oracle Database while expanding the support for global implementations and heterogeneous systems. It is more secure, more flexible, and faster. We announced the availability of Oracle GoldenGate 11gR2 via a press release. If you haven’t seen it yet, please check it out. As covered in this announcement, there are a variety of improvements in the product: Integrated Capture for Oracle Database: brings Oracle GoldenGate’s Capture process closer to the Oracle Database engine and enables support for Advanced Compression among other benefits. Enhanced Conflict Detection & Resolution, speeds and simplifies the conflict detection and resolution process for Active-Active deployments. Globalization, meaning Oracle GoldenGate can be deployed for databases that use multi-byte/Unicode character sets. Security and Performance Improvements, includes support Federal Information Protection Standard (FIPS). Increased Extensibility by kicking off actions based on an event record in the transaction log or in the Trail file. Integration with Oracle Enterprise Manager 12c , in addition to the Oracle GoldenGate Monitor product. Expanded Heterogeneity, including capture from IBM DB2 for i on iSeries (AS/400) and delivery to Postgres We will explain these new features in more detail at our upcoming launch webcast: Harness the Power of the New Release of Oracle GoldenGate 11g- (Sept 12 8am/10am PT) In addition to learning more about these new features, the webcast will allow you to ask your questions to product management via live Q&A section. So, I hope you will not miss this opportunity to explore the new release of Oracle GoldenGate 11g and see how it can deliver enterprise-class real-time data integration solutions.. I look forward to a great webcast to unveil GoldenGate’s new capabilities.

Read the article

10 Best Programming Podcast 2010 Edition

- by mbcrump

This list is in no particular order. Just the 10 best programming podcast that I have found so far. Stack Overflow Podcast - Jeff Atwood (of codinghorror.com) and Joel Spolsky (of joelonsoftware.com) discuss the development of their new programming community, StackOverflow.com. [This Podcast hasn’t been updated in a while, but its always great to hear more from Jeff Atwood] Hanselminutes - Hanselminutes is a weekly audio talk show with noted web developer and technologist Scott Hanselman and hosted by Carl Franklin. Scott discusses utilities and tools, gives practical how-to advice, and discusses ASP.NET or Windows issues and workarounds. [This Podcast has recently started talking about random topics like diabetes, plane travel and geek relationship tips. I am not sure if Scott is trying to move to a more mainstream audience or not] Herding Code - A weekly discussion featuring K. Scott Allen (odetocode.com), Kevin Dente, Scott Koon (lazycoder.com), and Jon Galloway. [Great all all-around podcast that I would recommend to all] Deep Fried Bytes - Deep Fried Bytes is an audio talk show with a Southern flavor hosted by technologists and developers Keith Elder and Chris Woodruff. The show discusses a wide range of topics including application development, operating systems and technology in general. Anything is fair game if it plugs into the wall or takes a battery. [This is one that just keeps getting better] Dot Net Rocks - .NET Rocks! is an Internet Audio Talk Show for Microsoft .NET Developers. [One of the first and usually very high quality content] Connected Show - Connected Show Podcast! A podcast covering new Microsoft technology for the developer community. The show is hosted by Dmitry Lyalin and Peter Laudati. [This and Polymorphic are one of my favorite podcast – Dmitry is a great host and would recommend this to all] Polymorphic Podcast - Object oriented development, architecture and best practices in .NET [Craig is a ASP.NET MVP and a great presenter. His podcast is great and it could only be better if he recorded it more often] ASP.NET Podcast - Wallace B. (Wally) McClure presents interviews and short technical talks on .NET Technologies. [Has great information on ASP.NET of course as well as iPhone Dev] Ruby on Rails Podcast - News and interviews about the Ruby language and the Rails website framework. [Even though I am not a Ruby programmer, I’ve found this podcast very interesting] Software Engineering Radio - Software Engineering Radio is a podcast targeted at the professional software developer. The goal is to be a lasting educational resource, not a newscast. Every ten days, a new episode is published that covers all topics software engineering. Episodes are either tutorials on a specific topic, or an interview with a well-known character from the software engineering world. All SE Radio episodes are original content ? we do not record conferences or talks given in other venues. Each episode comprises two speakers to ensure a lively listening experience. SE Radio is an independent and non-commercial organization. [Another excellent podcast – I would recommend any programmer add this to his/her drive home] If I have missed something, please feel free to email me and it might make the 2011 list. =)

Read the article

Asp.net Session State Revisited

- by karan@dotnet

Every now and then I see doubts and queries which I believe is the most discussed topic in the .net environment - Asp.net Sessions. So what really are they, why are they needed and what does browser and .net do with it. These and some of the other questions I hope to answer with this post. Because of the stateless nature of the HTTP protocol there is always a need of state management in a web application. There are many other ways to store data but I feel Session state is amongst the most powerful one. The ASP.NET session state is a technology that lets you store server-side, user-specific data. Our web applications can then use data to process request from the user for which the session state was instantiated. So when does a session is first created? When we start a asp.net application a non-expiring cookie is created and its called as ASP.NET_SessionId. Basically there are two methods for this depending upon how you configure this setting in your config file. The session ID can be a part of cookie as discussed above(called as ASP.NET_SessionId) or it is embedded in the browser’s URL. For the latter part we have to set cookie-less session in our web.config file. These Session ID’s are 120-bit random number that is represented by 20-character string. The cookie will be alive until you close your browser. If you browse from one app to another within the same domain, then both the apps will use the same session ID to track the session state. Why reuse? so that you don’t have to create a new session ID for each request. One can abandon one particular Session by calling Session.Abandon() which will stop the page processing and clear out the session data. A subsequent page request causes a brand new session object to be instantiated. So what happened to my cookie? Well the session cookie is still there even when one Session.Abandon() is called and another session object is created. The Session.Abandon() lets you clear out your session state without waiting for session timeout. By default, this time-out is a 20-minute sliding expiration. This expiration is refreshed every time that the user makes a request to the Web site and presents the session ID cookie. The Abandon method sets a flag in the session state object that indicates that the session state should be abandoned. If your app does not have global.asax then your session cookie will be killed at the end of each page request. So you need to have a global.asax file and Session_Start() handler to make sure that the session cookie will remain intact once its issued after the first page hit. The runtime invokes global.asax’s Session_OnEnd() when you call Session.Abandon() or the session times out. The session manager stores session data in HttpCache with sliding expiration where this timeout can be configured in the <sessionState> of web.config file. When the timeout is up the HttpCache will remove the session state object. Sometimes we want particular pages not to time out as compared to other pages in our applications. We can handle this in two ways. First, we can set a timer or may be a JavaScript function that refreshes the page after fixed intervals of time. The only thing being the page being cached locally and then the request is not made to the server so to prevent that you can add this to your page: <%@ OutputCache Location="None" VaryByParam="None" %> Second approach is to move your page into its own folder and then add a web.config to that folder to control the timeout. Also not all pages in your application will need access to session state. For those pages that do not, you can indicate that session state is not needed and prevent session data from being fetched from the store in requests to these pages. You can disable the session state at page level like this:<%@ Page EnableSessionState="False" %>tbc…

Read the article

Monitoring almost anything with BizTalk 360

- by Michael Stephenson

When you work in an integration environment it is common that you will find yourself in a situation where you integrate with some unusual applications or have some unusual dependencies. That is the nature of integration. When you work with BizTalk one of the common problems is that BizTalk often is the place where problems with applications you integrate with are highlighted and these external applications may have poor monitoring solutions. Fortunately if you are a working with a customer who uses BizTalk 360 then it contains a feature called the "Web Endpoint Manager". Typically the web endpoint manager is used to monitor web services that you integrate with and will ping them at appropriate times to make sure they return the expected HTTP status code. When you have an usual situation where you want to monitor something which is key to the success to your solution but you find yourself having to consider a significant custom solution to monitor the external dependency then the Web Endpoint Manager could be your friend. The endpoint manager monitors a url and checks for a certain status code. This means that you can create your own aspx web page and then make BizTalk 360 monitor this web page. Behind the web page you could write any code you wished. An example of this is architecture is shown in the below diagram. In the custom web page you would implement some custom code to do whatever it is that you want to monitor. In the below code snippet you can see how the Page_Load default method is doing some kind of check then depending on the result of the check it returns a certain HTTP code. protected void Page_Load(object sender, EventArgs e) { var result = CheckSomething(); if (result == "Success") Response.StatusCode = 202; else if (result == "DatabaseError") Response.StatusCode = 510; else if (result == "SystemError") Response.StatusCode = 512; else Response.StatusCode = 513; } In BizTalk 360 you would go into the Monitor and Notify tab and then to BizTalk Environment which gives you access to the Web Endpoint Manager. You need an alarm setup which configures how the endpoint will be checked. I'm not going to go through the details of creating the alarm as this is already documented in the BizTalk 360 documentation. One point to note is that in the example I am using I setup a threshold alarm which means that the url is checked about every minute and if there is an error that persists for a period of time then the alarm will raise the alert notification. In my example I configured the alarm to fire if the error persisted for 3 minutes. The below picture shows accessing the endpoint manager. In the web endpoint manager you would then configure your endpoint to monitor and the HTTP response code which indicates all is working fine. The below picture shows this. I now have my endpoint monitoring setup and BizTalk 360 should be checking my custom endpoint to see that it is available. If I wanted to manually sanity check that the endpoints I have registered are working fine then clicking the Refresh button will show if they are all good or not. If my custom ASP.net page which is checking my dependency gets a problem you will see in the endpoint manager that the status code does not match the expected return code and your endpoints will display in red and you can see the problem. The below picture shows this. If I use specific HTTP response codes for the errors the custom ASP.net page might encounter I can easily interpret these to know what the problem is. Using the alarms and notifications with BizTalk 360 it means when your endpoint goes into an error state you can easily configure email or SMS notifications from BizTalk 360 to tell you that your endpoint is having problems and you can use BizTalk 360 to help correlate what the problem is to allow you to investigate further. Below you can see the email which tells me my endpoint is not working. When everything returns to normal you will see the status is now fixed and you will see a situation like below where you can see the WebEndpoints are now green and the return code matches what is expected. Conclusion As you can see it is really easy to plug your own custom ASP.net page into the BizTalk 360 web endpoint monitoring feature. This extension then gives you the power to really extend the monitoring to almost anything you want as long as you can write some .net code to check that the dependency is available and working. It would be interesting to hear of any ideas people have around things they would monitor with this extension. More details on the end point monitor can be found on the following link: http://www.biztalk360.com/tour/monitoring_notifications

Read the article

Meet Thomas, the Most Innovational person in Oracle Direct EMEA of Q1

- by Maria Sandu

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Thomas was voted, by his peers, the most Innovational person in Oracle Direct EMEA of Q1, the first quarter of this fiscal! Thomas, a Business Development Consultant at Oracle Direct’s Applications Team, taught himself how to use and leverage the power of social engagement consistent with Oracle’s Social Media Policy. From these learning's he provided both his and other applications teams in Dublin with huge amounts of training and has presented his findings to the teams on more than one occasion. It is important to recognise that this isn't just a great idea....it actually works! The results speak for themselves. Thomas is engaging with customers and prospects via their preferred channel of communication and creating a strong personal social brand. We congratulate Thomas for his efforts of raising Social Media to the next level within Business Development Group. He put a lot of work into Social Selling, as one of the first within the BDG and set the example for a new innovative approach on how to sell anno 2013. He deserves to be recognized for this. His contribution to social media has been a great inspiration for all Business Development Consultants or Business Relationship Consultants. He knows what he talks about and has great conversion rates out of his social media campaigns. And he doesn't mind sharing his knowledge with everybody. Great effort in searching for new ways of communication and social selling. Thomas has shown great initiative towards leveraging the social media and networks (twitter, linkedin) to find new business opportunities in a previously way. He has shown great out-of-the-box thinking while addressing new companies and prospects and has shared those experiences and ideas to help his colleagues use the same approach. This included a presentation, informational emails and a general helpful attitude from him. He also shared his success stories from his innovational approach. Thomas is showing initiative with an innovative and fresh character, truly helping people to try something new with a focus on selling across channels and working for the CRM team which is focused on selling social. We think the way Thomas positions social, by using social is innovative and inspirational. What better way to tell your clients do social, by engaging with them on a social platform? Going always the extra mile, we believe, that Thomas Brits, is an innovator from the day he walked into Oracle Direct. The way Thomas operates on the work floor by introducing new ideas to find the best opportunities as possible shows he runs the extra mile for coming up with new ideas around how to engage with customers more efficiently for instance via Social Media. Thomas also organises power hours/days for the team. He is the best! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Helping install mrcwa and solve problems with f2py in Ubuntu 14.04 LTS

- by user288160

I am sorry if this is the wrong section but I am starting to get desperate, please someone help me... I need to install the program mrcwa-20080820 (sourceforge.net/projects/mrcwa/) because a summer project that I am involved. I need to use it together with anaconda (store.continuum.io/cshop/anaconda/), I already installed Anaconda and apparently it is working. When I type: conda --version I got the expected answer. conda 3.5.2 If I tried to import numpy or scipy with python or simple type f2py there are no errors. So far so good. But when I tried to install this program sudo python setup.py install I got these errors: running install running build sh: 1: f2py: not found cp: cannot stat ‘mrcwaf.so’: No such file or directory running build_py running install_lib running install_egg_info Removing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Writing /usr/local/lib/python2.7/dist-packages/mrcwa-20080820.egg-info Obs: I am trying to use intel fortran 64-bits and Ubuntu 14.04 LTS. So I was checking f2py and tried to execute the program hello world f2py -c -m hello hello.f from here: cens.ioc.ee/projects/f2py2e/index.html#usage and I had some problems too: running build running config_cc unifing config_cc, config, build_clib, build_ext, build commands --compiler options running config_fc unifing config_fc, config, build_clib, build_ext, build commands --fcompiler options running build_src build_src building extension "hello" sources f2py options: [] f2py:> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c creating /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 Reading fortran codes... Reading file 'hello.f' (format:fix,strict) Post-processing... Block: hello Block: foo Post-processing (stage 2)... Building modules... Building module "hello"... Constructing wrapper function "foo"... foo(a) Wrote C/API module "hello" to file "/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 /hellomodule.c" adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c' to sources. adding '/tmp/tmpf8P4Y3/src.linux-x86_64-2.7' to include_dirs. copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.c -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 copying /home/felipe/.local/lib/python2.7/site-packages/numpy/f2py/src/fortranobject.h -> /tmp/tmpf8P4Y3/src.linux-x86_64-2.7 build_src: building npy-pkg config files running build_ext customize UnixCCompiler customize UnixCCompiler using build_ext customize Gnu95FCompiler Could not locate executable gfortran Could not locate executable f95 customize IntelFCompiler Found executable /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort customize LaheyFCompiler Could not locate executable lf95 customize PGroupFCompiler Could not locate executable pgfortran customize AbsoftFCompiler Could not locate executable f90 Could not locate executable f77 customize NAGFCompiler customize VastFCompiler customize CompaqFCompiler Could not locate executable fort customize IntelItaniumFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler customize IntelEM64TFCompiler using build_ext building 'hello' extension compiling C sources C compiler: gcc -pthread -fno-strict-aliasing -g -O2 -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes -fPIC creating /tmp/tmpf8P4Y3/tmp creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3 creating /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local/lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.c:17: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ gcc: /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c In file included from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarraytypes.h:1761:0, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/ndarrayobject.h:17, from /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/arrayobject.h:4, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.h:13, from /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.c:2: /home/felipe/.local/lib/python2.7/site-packages/numpy/core/include/numpy/npy_1_7_deprecated_api.h:15:2: warning: #warning "Using deprecated NumPy API, disable it by " "#defining NPY_NO_DEPRECATED_API NPY_1_7_API_VERSION" [-Wcpp] #warning "Using deprecated NumPy API, disable it by " \ ^ compiling Fortran sources Fortran f77 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict Fortran f90 compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FR -fPIC -xhost -openmp -fp-model strict Fortran fix compiler: /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -FI -fPIC -xhost -openmp -fp-model strict compile options: '-I/tmp/tmpf8P4Y3/src.linux-x86_64-2.7 -I/home/felipe/.local /lib/python2.7/site-packages/numpy/core/include -I/home/felipe/anaconda/include/python2.7 -c' ifort:f77: hello.f /opt/intel/composer_xe_2013_sp1.3.174/bin/intel64/ifort -shared -shared -nofor_main /tmp/tmpf8P4Y3/tmp/tmpf8P4Y3/src.linux-x86_64-2.7/hellomodule.o /tmp/tmpf8P4Y3 /tmp/tmpf8P4Y3/src.linux-x86_64-2.7/fortranobject.o /tmp/tmpf8P4Y3/hello.o -L/home/felipe /anaconda/lib -lpython2.7 -o ./hello.so Removing build directory /tmp/tmpf8P4Y3 Please help me I am new in ubuntu and python. I really need this program, my advisor is waiting an answer. Thank you very much, Felipe Oliveira.

Search Results

Search found 7190 results on 288 pages for 'character codes'.

Page 240/288 | < Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247 | Next Page >

- by VishnuTiwariBlog

- by Matthew Guay

- by paxer

- by Mala Narasimharajan

- by Brian Biales

- by vik20000in

- by Vincent Maverick Durano

- by fx.nicolas

- by Jon Galloway

- by MightyZot

- by Marco Demaio

- by sreejukg

- by nmarun

- by Shaun

- by user1032531

- by Rick Strahl

- by The Digital Ninja

- by Shaun

- by Marco Demaio

- by Irem Radzik

- by mbcrump

- by karan@dotnet

- by Michael Stephenson

- by Maria Sandu

- by user288160

< Previous Page | 236 237 238 239 240 241 242 243 244 245 246 247 | Next Page >