Search Results

Search found 39497 results on 1580 pages for 'two shoes'.

Page 258/1580 | < Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >

  • Linux and GeForce 8400 dual monitor

    - by Andrea Polci
    I'm trying to install a linux distribution on my PC. I have a GeForce 8400 GS with two connected monitors. I tried with Fedora 12 and Ubuntu 9.10 (both 64 and 32 bit) and the live cd cannot boot properly. I don't get a visible error on Ubuntu, it simply hangs up during the boot. With Fedora I get this error: [drm] Modeset on unsupported output type [drm] Table 0x0000 not found for 1/1 using first I tried to disconnect one of the two monitor and was able to install on my HD and boot from there, but if I try to connect the second monitor again I cannot boot. Do I need to install something else? (a driver for my video card for example).

    Read the article

  • Performance difference between MacBook Pro (2.8 GHz) vs Air (1.7 GHz)?

    - by jonathanconway
    I'm comparing these two Apple laptops: MacBook Pro (13", 2011 model): 2.8GHz dual-core Intel Core i7 processor with 4MB shared L3 cache 4GB (two 2GB SO-DIMMs) of 1333MHz DDR3 SDRAM AMD Radeon HD 6770M graphics processor with 1GB of GDDR5 memory on 2.4GHz configuration MacBook Air (13", 2011 model): 1.7GHz dual-core Intel Core i5 with 3MB shared L3 cache 4GB of 1333MHz DDR3 onboard memory Intel HD Graphics 3000 processor with 384MB of DDR3 SDRAM shared with main memory There's definitely a gap between them in terms of CPU speed and graphics, but what practical difference would this make on a day-to-day basis? On the one hand, I love the sleek, thin appearance of the Air. On the other hand, I don't want a machine that's going to be dog-slow when doing tasks such as running Virtual Machines, dual-booting to Windows and running multiple instances of Visual Studio, and maybe some light gaming. Is there going to be a major difference that makes the MacBook Pro a more attractive purchase?

    Read the article

  • Windows Server 2008 R2 Software Deployment on Active Directory - Schema Issue

    - by weedave
    We have two servers, one running Windows Server 2003 SP2 and one running Windows Server 2008 R2. Both servers have their own versions of Group Policy Management (1.0.2 on 2003 and 6.0.0.1 on 2008). We are wanting to migrate everything over to the newer 2008 server, including software deployment. However, when I try to add a new software package using a .msi file, I get the following error: "The schema for the software installation data in the Active Directory does not match the required schema." I have tried two separate software packages and get the same error on the 2008 server. However, when I do the same on the 2003 server, it adds the software package without any problems. The .msi files I am using are up-to-date - one is the most recent version of Google Chrome. Is this problem caused by the different versions of the OS, or the Group Policy Management program? How do we "upgrade" our Active Directory to allow software deployment on the 2008 server? Thanks.

    Read the article

  • How to block access to websites on a linux box [closed]

    - by user364952
    I'm just curious how many ways people can come up with to block access to a website. I simply intended to block (my own) access to news.ycombinator.com to stop my productivity drain. The first two methods I thought of were editing the hosts file to resolve news.ycombinator.com to 0.0.0.0 or adding a rule to iptables. iptables -A OUTPUT -d news.ycombinator.com -j REJECT Disclaimer: I do realise that the above two methods are easily by-passable. Doesn't help this is my own machine. What other ways does the internet know?

    Read the article

  • I want to change hard drive. How to move system partition with Windows 7?

    - by Semyon Perepelitsa
    I've bought a new hard drive and want to move all my data to it. I had no problem with moving all files on non-system partition. But I don't know how to move system partiton. Now I have 3 partitions on the new disk, fist two was created by Windows installation CD (I tried to move system using internal tools, but it didn't work for me), third is filled with my successfully transferred data from old disk. And there are two partitions on the old disk: the first one is system (Windows 7) and the second one is my old main storage, that I already moved to the new hard drive and now it is empty. How can I change the placement of Windows 7 with minimal difficulties and losses, so I could work on the new hard drive just as I did it on the old one?

    Read the article

  • Extend my LAN network

    - by user268291
    i have a patch panel and hardwiring already setup in my office. The patch panel is 24-port and all the ports are engaged. All my switch ports are engaged. Now, I have a printer connected to a wall point (RJ45) which I want to shift to a new room where there is no LAN setup. I want to have two RJ45 wall plugs in the new room so that I can connect one RJ45 port to have my LAN in the new room and the other RJ45 wall port I want to use for my printer. There is no option other than LAN (no wireless). Please help me and tell me how do I get the two RJ45 wall plate plugs in the new room up and keep my LAN running. It is a little urgent for me. Please help.

    Read the article

  • Virtualhost entries gets over-written when apache httpd.conf is rebuilt

    - by Amitabh
    Background: We have been trying to get a wildcard SSL working on multiple sub domains on a single dedicated address.. We have two sub domains next.my-personal-website.com and blog.my-personal-website.com Part of our strategy has been to edit the httpd.conf and add the NameVirtualHost xx.xx.144.72:443 directive and the virtualhost entries for port 443 for the subdomains there. This works good if we just edit the httpd.conf, add the entries, save it and restart the apache. The problem: But if we add a new sub domain from cpanel or we run the # /usr/local/cpanel/bin/apache_conf_distiller --update # /scripts/rebuildhttpdconf the virtualhost entries that we added manually are no more there in the newly generated httpd.conf file. Only the virtualhost entry for the main domain for port 443 that was there before we made edits to the httpd.conf is there(assuming we are not discussing virtualhost entries for port 80). I understand we need to put the new virtualhost entries in some include files as mentioned here in the cpanel documentation. But am not sure where to. So the question would be where do I put the NameVirtualHost xx.xx.144.72:443 directive and the two virtualhost directive for port 443, so that they are not overwritten when httpd.conf is rebuilt/regenerated later. Virtualhost entries: The two virtualhost entries for the subdomains are: <VirtualHost xx.xx.144.72:443> ServerName next.my-personal-website.com ServerAlias www.next.my-personal-website.com DocumentRoot /home/myguardi/public_html/next.my-personal-website.com ServerAdmin [email protected] UseCanonicalName On CustomLog /usr/local/apache/domlogs/next.my-personal-website.com combined CustomLog /usr/local/apache/domlogs/next.my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/next.my-personal-website.com/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/next.my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> and <VirtualHost xx.xx.144.72:443> ServerName blog.my-personal-website.com ServerAlias www.blog.my-personal-website.com DocumentRoot /home/myguardi/public_html/blog.my-personal-website.com ServerAdmin [email protected] UseCanonicalName On CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com combined CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/blog.my-personal-website.com/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/blog.my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> and the automatically generated virtualhost entry for the main domain for port 443 is <VirtualHost xx.xx.144.72:443> ServerName my-personal-website.com ServerAlias www.my-personal-website.com DocumentRoot /home/myguardi/public_html ServerAdmin [email protected] UseCanonicalName Off CustomLog /usr/local/apache/domlogs/my-personal-website.com combined CustomLog /usr/local/apache/domlogs/my-personal-website.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." ## User myguardi # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup myguardi myguardi </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup myguardi myguardi </IfModule> ScriptAlias /cgi-bin/ /home/myguardi/public_html/cgi-bin/ SSLEngine on SSLCertificateFile /etc/ssl/certs/my-personal-website.com.crt SSLCertificateKeyFile /etc/ssl/private/my-personal-website.com.key SSLCACertificateFile /etc/ssl/certs/my-personal-website.com.cabundle CustomLog /usr/local/apache/domlogs/my-personal-website.com-ssl_log combined SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown <Directory "/home/myguardi/public_html/cgi-bin"> SSLOptions +StdEnvVars </Directory> # To customize this VirtualHost use an include file at the following location # Include "/usr/local/apache/conf/userdata/ssl/2/myguardi/my-personal-website.com/*.conf" I really appreciate if somebody can tell me how to proceed on this. Thank you. Update: Include directives present are: `Include "/usr/local/apache/conf/includes/pre_main_global.conf" Include "/usr/local/apache/conf/includes/pre_main_2.conf" Include "/usr/local/apache/conf/php.conf" Include "/usr/local/apache/conf/includes/errordocument.conf" Include "/usr/local/apache/conf/modsec2.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/pre_virtualhost_2.conf" ` These are the entries that are generated before any virtualhost entry is defined. Towards the end of the httpd.conf file , the following two entries are added Include "/usr/local/apache/conf/includes/post_virtualhost_global.conf" Include "/usr/local/apache/conf/includes/post_virtualhost_2.conf" The older httpd.conf file before we added the virtualhost entries for sub domains for port 443 can be viewed here

    Read the article

  • Cant logon to domain over site-to-site vpn

    - by 3molo
    Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

    Read the article

  • Can someone explain RAID-0 in plain English?

    - by Edward Tanguay
    I've heard about and read about RAID throughout the years and understand it theoretically as a way to help e.g. server PCs reduce the chance of data loss, but now I am buying a new PC which I want to be as fast as possible and have learned that having two drives can considerably increase the perceived performance of your machine. In the question Recommendations for hard drive performance boost, the author says he is going to RAID-0 two 7200 RPM drives together. What does this mean in practical terms for me with Windows 7 installed, e.g. can I buy two drives, go into the device manager and "raid-0 them together"? I am not a network administrator or a hardware guy, I'm just a developer who is going to have a computer store build me a super fast machine next week. I can read the wikipedia page on RAID but it is just way too many trees and not enough forest to help me build a faster PC: RAID-0: "Striped set without parity" or "Striping". Provides improved performance and additional storage but no redundancy or fault tolerance. Because there is no redundancy, this level is not actually a Redundant Array of Inexpensive Disks, i.e. not true RAID. However, because of the similarities to RAID (especially the need for a controller to distribute data across multiple disks), simple strip sets are normally referred to as RAID 0. Any disk failure destroys the array, which has greater consequences with more disks in the array (at a minimum, catastrophic data loss is twice as severe compared to single drives without RAID). A single disk failure destroys the entire array because when data is written to a RAID 0 drive, the data is broken into fragments. The number of fragments is dictated by the number of disks in the array. The fragments are written to their respective disks simultaneously on the same sector. This allows smaller sections of the entire chunk of data to be read off the drive in parallel, increasing bandwidth. RAID 0 does not implement error checking so any error is unrecoverable. More disks in the array means higher bandwidth, but greater risk of data loss. So in plain English, how can "RAID-0" help me build a faster Windows-7 PC that I am going to order next week?

    Read the article

  • Unable to call through asterisk

    - by sk
    I want to create a voip service. I have installed asterisk-1.4 on a dedicated remotely hosted debian lenny distro. I made a sip.conf and extensions.conf so as to place a call between two sip phones(i am using xlite 3.0) installed in some other Windows PC. Whenever i switch this phones the asterisk console shows that Registration from '"1000"<sip:[email protected]>' failed for '122.168.10.254' - Peer is not supposed to register Where xx.xx.xx.xx is the server's IP. i.e my sip phones are unable to register with the asterisk server. Please help me to place call between two sip phones #sip show peers Name/username Host Dyn Nat ACL Port Status 2000 (Unspecified) D 0 Unmonitored 1000 (Unspecified) D 0 Unmonitored 2 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 2 offline] # sip show registry Host Username Refresh State Reg.Time # sip show channels Peer User/ANR Call ID Seq (Tx/Rx) Format Hold Last Message 0 active SIP channels

    Read the article

  • Problems in "Save as PDF" plugin with Arabic numbers

    - by Mohamed Mohsen
    I use the "Save as PDF" plugin with Microsoft word 2007 to generate a PDF document from DOCX document. It works great except that the Arabic numbers in the word file have been converted to English numbers in the PDF document. Kindly find two links containing two screen shots explaining the problem. http://img27.imageshack.us/img27/2893/englishpdf.jpg http://img4.imageshack.us/img4/1857/arabicword.jpg The first image is the generated PDF file with the English numbers highlighted. The second image is the original word file with the Arabic numbers highlighted. Thanks in advance

    Read the article

  • Is it possible to fake a Windows install for grub to add to boot menu?

    - by Mussnoon
    When doing a fresh install of a Linux distro (Ubuntu, for instance) on a fresh hard drive, if I want to install Linux first, and Windows later, is it possible to make grub think there's a Windows install on the first partition so that it'll be added to the boot menu after the installation is complete? To illustrate, I have a new hard drive and have created two primary partitions (both still raw) and two logical (Ext4 and Swap). I want to install Ubuntu on the Ext4 partition first, and some version of Windows on the first primary partition only after that (because I currently don't have a Windows install disk, but do have one for Ubuntu). Is it possible to make Ubuntu add an entry for Windows right now and avoid having to repair grub after I've installed Windows?

    Read the article

  • Critique My Backup and Storage Plan

    - by MetaHyperBolic
    My current storage (RAID-1 off of a hardware RAID card) and backup (a spare drive) solutions for my home network are inadequate. I have too much data scattered on various one-off drives. It is time to evolve. Backups seem simple enough, at least: lots of big drives. However, I am bewildered by the number of choices for small home storage. The Drobo S looks appealing. So does the ReadyNAS. I am not looking for bunches of shiny features, I'm mostly interested in reliability. I am not interested in building Yet Another PC to create a file server or doing something in the cloud, or whatever. I'm stupid, so I am keeping it simple. Requirements for Main Volume: Starting working space roughly 2TB, with options for growth up to 5TB RAID or something RAID-like with at least one parity drive eSATA II for speed during backups Ability to shut down gracefully when alerted of low power by a UPS Optional but Desirable: Will take 2TB drives now with options for the larger 3TB drives coming in 2010-2011 Optional but Desirable: : RAID-6 or something similar, with two parity drives Optional but Desirable: : Hot spare Ethernet connection not required, as the volume will be shared via the same machines which runs my home print server Backups: Backup performed via ROBOCOPY in mirror mode to an external hard drive via a eSATA II connection. Start with rotating between two external 2TB hard drives, will go up to six external 2TB drives. Start with a weekly backup, move to a bi-weekly backup as more drives are added. Move to 3TB drives as the size of my main volume increases. Backup drives will be stored on an off-site location. Hard drives: I plan on buying all of the same model, but different batches from different vendors. I found a "burn-in" utility with which I can pound away on the drives for a couple of weeks before adding them to the backup pool or the main volume. I estimate that I am looking at roughly $1,500 to start, once I start throwing in two TB drives for backup and four for storage. So, are there any obvious flaws in my plan? What have I overlooked? Any suggestions for the storage device for my main volume that fits my requirements? Or do I just keep it simple, 2 drives in RAID-1, then perform due diligence with my backups, accepting that I will have to buy a whole new unit when my data grows past 2TB?

    Read the article

  • Unicast traffic between hosts on a switch leaving the switch by its uplink. Why?

    - by Rich Lafferty
    I have a weird thing happening on our network at my office which I can't quite get my head around. In particular I can't tell if it's a problem with a switch, or a problem with configuration. We have a Cisco SG300-52 switch (sw01) in the top of a rack in our server room, connected to another SG300-28 that acts as our core switch (core01). Both run layer 2 only, our firewalls do routing between VLANs. They have a dozen or so VLANs between them. Gi1 on sw01 is a trunk port connected to gi1 on core01. (Disclosure: There are other switches in our environment but I'm pretty sure I've isolated the problem down to these two. Happy to provide more info if necessary.) The behaviour I'm seeing is limited to one VLAN, vlan 12 -- or, at least, it's not happening on the other ones I checked (It's hard to guarantee the absence of packets), and it is: sw01 is forwarding, to core01, traffic which is between two hosts which are both plugged into sw01. (I noticed this because the IDS in our firewall gave a false positive on traffic which should not reach the firewall.) We noticed this mostly between our two dhcp/dns servers, net01 (10.12.0.10) and net02 (10.12.0.11). net01 is physical hardware and net02 is on a VMware ESX server. net01 is connected to gi44 on sw01 and net02's ESX server to gi11. [net01]----gi44-[sw01]-gi1----gi1-[core01] [net02]----gi11/ Let's see some interfaces! Remember, vlan 12 is the problem vlan. Of the others I explicitly verified that vlan 27 was not affected. Here's the two hosts' ports: esx01 contains net02. sw01#sh run int gi11 interface gigabitethernet11 description esx01 lldp med disable switchport trunk allowed vlan add 5-7,11-13,100 switchport trunk native vlan 27 ! sw01#sh run int gi44 interface gigabitethernet44 description net01-1 lldp med disable switchport mode access switchport access vlan 12 ! Here's the trunk on sw01. sw01#sh run int gi1 interface gigabitethernet1 description "trunk to core01" lldp med disable switchport trunk allowed vlan add 4-7,11-13,27,100 ! And the other end of the trunk on core01. interface gigabitethernet1 description sw01 macro description switch switchport trunk allowed vlan add 2-7,11-16,27,100 ! I have a monitor port on core01, thus: core01#sh run int gi12 interface gigabitethernet12 description "monitor port" port monitor GigabitEthernet 1 ! And the monitor port on core01 sees unicast traffic going between net01 and net02, both of which are on sw01! I've verified this with a monitor port on sw01 that sees the net01-net02 unicast traffic leaving via gi1 too. sw01 knows that both of those hosts are on ports that are not its trunk port: :) ratchet$ arp -a | grep net net02.2ndsiteinc.com (10.12.0.11) at 00:0C:29:1A:66:15 [ether] on eth0 net01.2ndsiteinc.com (10.12.0.10) at 00:11:43:D8:9F:94 [ether] on eth0 sw01#sh mac addr addr 00:0C:29:1A:66:15 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:0c:29:1a:66:15 gi11 dynamic sw01#sh mac addr addr 00:11:43:D8:9F:94 Aging time is 300 sec Vlan Mac Address Port Type -------- --------------------- ---------- ---------- 12 00:11:43:d8:9f:94 gi44 dynamic I also brought up an unused port on sw01 on vlan 12, but the unicast traffic was (as best as I could tell) not coming out that port. So it doesn't look like sw01 is pushing it out all its ports, just the right ports and also gi1! I've verified that sw01 is not filling up its address-table: sw01#sh mac addr count This may take some time. Capacity : 8192 Free : 7983 Used : 208 The full configs for both core01 and sw01 are available: core01, sw01. Finally, versions: sw01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.0.0.4 ( date 08-Apr-2010 time 16:37:57 ) HW version V01 core01#sh ver SW version 1.1.2.0 ( date 12-Nov-2011 time 23:34:26 ) Boot version 1.1.0.6 ( date 11-May-2011 time 18:31:00 ) HW version V01 So my understanding is this: sw01 should take unicast traffic for net01 and send it only out net02's port, and vice versa; none of it should go out sw01's uplink. But core01, receiving traffic on gi1 for a host it knows is on gi1, is right in sending it out all of its ports. (That is: sw01 is misbehaving, but core01 is doing what it should given the circumstances.) My question is: Why is sw01 sending that unicast traffic out its uplink, gi1? (And pre-emptively: yes, I know SG300s leave much to be desired, and yes, we should have spanning-tree enabled, but that's where I'm at right now.)

    Read the article

  • Ubuntu 12.04 boot degraded raid

    - by beacon_bonanza
    I've installed Ubuntu 12.04.1 in a new server and set up the 4 hard drives with 3 RAID 1 devices, the configuration is such that the first two drives have md0 (swap space) and md1 (/) with the third and fourth drives having md2 (/var). I've been testing the operation under a drive failure and found that the system boots fine if I remove disk two but if I remove disk one then the system gets to grub and then just restarts. I'm confused as to why grub appears to be loading properly from disk two but then the boot fails. I've tried to copy the MBR from disk 1 to 2: dd if=/dev/sda of=/dev/sdb bs=512 count=1 but this didn't make a difference. Any ideas how to get it to boot from just the second disk? fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sda1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sda2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ccfa5 Device Boot Start End Blocks Id System /dev/sdb1 2048 31250431 15624192 fd Linux RAID autodetect /dev/sdb2 * 31250432 3907028991 1937889280 fd Linux RAID autodetect Disk /dev/sdd: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00035b05 Device Boot Start End Blocks Id System /dev/sdd1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c73aa Device Boot Start End Blocks Id System /dev/sdc1 2048 3907028991 1953513472 fd Linux RAID autodetect Disk /dev/md1: 1984.3 GB, 1984264208384 bytes 2 heads, 4 sectors/track, 484439504 cylinders, total 3875516032 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2: 2000.3 GB, 2000263380992 bytes 2 heads, 4 sectors/track, 488345552 cylinders, total 3906764416 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0: 16.0 GB, 15990652928 bytes 2 heads, 4 sectors/track, 3903968 cylinders, total 31231744 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

    Read the article

  • Can I set up a VM Host's drives to appear as if they belong to the VM OS?

    - by Sinaesthetic
    A couple things. I added two of the host drives to the shared drives area of the VM. Neither of them show up in the VM's OS. What I actually would like to do is configure two of these drives that are on the host OS to appear as if they are on the VM. So that I can share them through the VM. Sounds wonkey, I know. The VM is Windows Server 2008 and the Host is Mac OSX Lion. I would like to host my media drives through windows server rather than over OSX as I have nothing but problems. I'm not sure if this is possible. Any input?

    Read the article

  • Excel scatter chart with multiple date ranges

    - by Abiel
    I have multiple blocks of time series data on an Excel sheet, with each block having its own set of dates. For example, I might have dates in column A, values in column B, and then dates in column D and values in column E. The values in B go with the dates in A, and the values in E go with the dates in D. The dates in A and D may not be the same. I would like to create a scatter chart with a time category axis that is the union of my two input date ranges in columns A and D. If I select all the data and then go insert chart (in Excel 2010), Excel treats only column A as the X axis, and looks at D as just another set of values. I can get Excel to do what I want by first just charting columns A and B, then selecting D and E and copy-pasting onto the chart. However, I would like to avoid this two-step procedure if possible.

    Read the article

  • secure synchronization of large amount of data

    - by goncalopp
    I need to automatically mirror a large amount (terabytes) of files in two unix machines over a slow link (1 Mbps). This needs to be done frequently, but the data doesn't change too much (delta transmission doesn't saturate the link). The usual solution would be rsync, but there's an additional requirement: it's undesirable, from a security standpoint, that either the source or destination machines have (keyless) ssh keys to each other, or any kind of filesystem access. All communication between the two machines should thus be initialized (and mediated) through a third machine. I've asked a separate question about rsync in particular here. Are there other obvious solutions I'm missing?

    Read the article

  • Apache disabled virtual host domains resolve an enabled virtual host

    - by littleK
    I have three virtual hosts defined on apache on my Ubuntu server for three different domains. If I disable two of the virtual hosts (a2dissite) and try to resolve those two URL's in the browser, then the one remaining enabled site will resolve. How can I configure apache so that the domains for the disabled virtual hosts do not resolve? This is how all 3 virtual hosts are configured (info is masked): # domain: myfirstdomain.com # public: /home/me/public/myfirstdomain.com/ <VirtualHost *:80> # Admin email, Server Name (domain name), and any aliases ServerAdmin [email protected] ServerName www.myfirstdomain.com ServerAlias myfirstdomain.com # Index file and Document Root (where the public files are located) DirectoryIndex index.html index.php DocumentRoot /home/me/public/myfirstdomain.com/public # Log file locations LogLevel warn ErrorLog /home/me/public/myfirstdomain.com/log/error.log CustomLog /home/me/public/myfirstdomain.com/log/access.log combined </VirtualHost>

    Read the article

  • Launchd execute command when folder contents modified or changed.

    - by ThomasReggi
    For the past two days i've been trying to get a launchd plist to execute a script "program" when the contents of a folder on my desktop contents have modified or changed. I've gone through tons of configuration settings and have tried the Users/me/Desktop/folderinquestion and Users/me/Desktop/folderinquestion (with and without trailing slash). The script executes only when something is added or removed but it doesn't recognize when files are updated and subdirectories. launchd is really my last hope to getting this to working i've already exausted folder actions, and bash scripts, uninstallable linux methods etc. I have used Lingon to create my plists and have followed this youtube tutorial. Any help would be greatly appreciated. This is what I have right now, and like I said does not work when folder is modified or changed IDEA: Thinking about creating two separate plists that reference each other one plist can watch a folder for additions and subtractions and when one occurs it can create another plist that watches every file in the folder, this could also be recursive and count in for subdirectories.

    Read the article

  • Upgrading NAS hard drives

    - by Mihai Damian
    I was thinking of buying a NAS for home-usage. I've never used a NAS or had HDDs set up in Raids. Before I commit myself to moving all my data to a NAS I need to find out how difficult it is to upgrade and replace the NAS' hard drives. Suppose I set up a Raid 1 NAS with two 1TB hdds. At some point in the future I will use up all the space and will have to install two new 2TB hdds. Now I'll need to migrate the data from the old disks to the new ones. Will I have to hook up one of the old disks in a computer and copy all the data back in the NAS? Or can the migration be done using only the NAS? I realize the answer to the question might depend on the NAS model. Being a simple for-home solution I was thinking of getting something along the lines of D-link's 323.

    Read the article

  • Windows 7 Machine Makes Router Drop -All- Wireless Connections [closed]

    - by Hammer Bro.
    Note: I accidentally originally posted this question over at SuperUser, and I still think the issue is caused by some low-level networking practice of Windows 7, but I think the expertise here would be more apt to figuring it out. Apologies for the cross-post. Some background: My home network consists of my Desktop, a two-month old Windows 7 (x64) machine which is online most frequently (N-spec), as well as three other Windows XP laptops (all G) that only connect every now and then (one for work, one for Netflix, and the other for infrequent regular laptop uses). I used to have a Belkin F5D8236-4 wireless router, and everything worked great. A week ago, however, I found out that the Belkin absolutely in no way would establish a VPN connection, something that has become important for work. So I bought a Netgear WNR3500v2/U/L. The wireless was acting a little sketchy at first for just the Windows 7 machine, but I thought it had something to do with 802.11N and I was in a hurry so I just fished up an ethernet cable and disabled the computer's wireless. It has now become apparent, though, that whenever the Windows 7 machine is connected to the router, all wireless connections become unstable. I was using my work laptop for a solid six hours today with no trouble, having multiple SSH connections open over VPN and streaming internet radio in the background. Then, within two minutes of turning on this Windows 7 box, I had lost all connectivity over the wireless. And I was two feet away from the router. The same sort of thing happens on all of the other laptops -- Netflix can be playing stuff all weekend, but if I come up here and do things on this (W7) computer, the streaming will be dead within ten minutes. So here are my basic observations: If the Windows 7 machine is off, then all connections will have a Signal Strength of Very Good or Excellent and a Speed of 48-54 Mbps for an indefinite amount of time. Shortly after the Windows 7 machine is turned on, all wireless connections will experience a consistent decline in Speed down to 1.0 Mbps, eventually losing their connection entirely. These machines will continue to maintain 70% signal strength, as observed by themselves and router. Once dropped, a wireless connection will have difficulty reconnecting. And, if a connection manages to become established, it will quickly drop off again. The Windows 7 machine itself will continue to function just fine if it's using a wired connection, although it will experience these same issues over the wireless. All of the drivers and firmwares are up to date, and this happened both with the stock Netgear firmware as well as the (current) DD-WRT. What I've tried: Making sure each computer is being assigned a distinct IP. (They are.) Disabling UPnP and Stateful Packet Inspection on the router. Disabling Network Sharing, SSDP Discovery, TCP/IP NetBios Helper and Computer Browser services on the Windows 7 machine. Disabling QoS Packet Scheduler, IPv6, and Link Layer Topology Discovery options on my ethernet controller (leaving only Client for Microsoft Networks, File and Printer Sharing, and IPv4 enabled). What I think: It seems awfully similar to the problems discussed in detail at http://social.msdn.microsoft.com/Forums/en/wsk/thread/1064e397-9d9b-4ae2-bc8e-c8798e591915 (which was both the most relevant and concrete information I could dig up on the internet). I still think that something the Windows 7 IP stack (or just Operating System itself) is doing is giving the router fits. However, I could be wrong, because I have two key differences. One is that most instances of this problem are reported as the entire router dying or restarting, and mine still works just fine over the wired connection. The other is that it's a new router, tested with both the factory firmware and the (I assume) well-maintained DD-WRT project. Even if Windows 7 is still secretly sending IPv6 packets or the TCP Window Scaling implementation that I hear Vista caused some trouble with (even though I've tried my best to disable anything fancy), this router should support those functions. I don't want to get a new or a replacement router unless someone can convince me that this is a defective unit. But the problem seems too specific and predictable by my instincts to be a hardware hiccup. And I don't want to deal with the inevitable problems that always seem to take half a day to resolve when getting a new router, since I'm frantically working (including tomorrow) to complete a project by next week's deadline. Plus, I think in the worst case scenario, I could keep this router connected directly to the modem, disable its wireless entirely, and connect the old Belkin to it directly. That should allow me to still use VPN (although I'll have to plug my work laptop directly into that router), and then maintain wireless connections for all of the other computers. But that feels so wrong to me. Anyone have any ideas what the cause and possible solution could be? Clarifications: The Windows 7 machine is directly connected via an ethernet cable to the router for everything above. But while it is online, all other computers' wireless connections become unusable. It is not an issue of signal strength or interference -- no other devices within scanning range are using Channel 1, and the problem will affect computers that are literally feet away from the router with 95% signal strength.

    Read the article

  • Confusion about TCP packet analysis terms

    - by Berkay
    I'm analyzing our network and have some confusion about the terms: this is the 2-packet output from source to destination. from these i have to get some features as describe, pls make me clear... packets with at least a bytes of TCP data payload: it seems tcp.len0; The minimum segment size (confusion is headers are included or or not) The average segment size observed during the lifetime of the connection, the definition: is calculated as the value reported in the actual data bytes divided by the actual data pkts reported. Total bytes in IP packets, should be ip_len value. Total bytes in (Ethernet) The total number of bytes sent probably related to frame.len and frame.cap_len these two terms are describes as, also make me clear about these two terms. frame.cap_len: Frame length stored into the capture file frame.len: Frame length on the wire

    Read the article

  • So how does one use rockmongo to connect to a mongo sharded setup with replicasets?

    - by Tom
    I try to use rockmongo, to connect to our cluster. Our setup is a setup of two shards each consisting of a replicaset. I try to connect to the mongos instance and while rockmongo connects I get an error when trying to list the dbs: Execute failed:not master function (){ return db.getCollectionNames(); } This has something to do with the replica sets and everybody points to: $MONGO["servers"][$i] = array("replicaSet" => "xxxxx"); This is all fine, but I have two replicasets and as far as I understand I should connect to the mongos instance and not directly to the members of the set. So how does one use rockmongo to connect to a mongo sharded setup with replicasets?

    Read the article

  • Database Performance Across 3 NetApp FAS2050

    - by bjd145
    I recently inherited a SQL Server 2005 box that has LUNs mounted on it from three different NetApp FAS2050 filers. The reason there are three is because the first two filers are out of space and our databases continually need more of it. What kind of performance impact (if any) does this setup have? Is it better to move the LUNs from the two other older filers to the newer one so that we have only one filer/controller for caching, etc ? This is in general. I apologize for not having more specifics.

    Read the article

< Previous Page | 254 255 256 257 258 259 260 261 262 263 264 265  | Next Page >