Search Results

Search found 8125 results on 325 pages for 'metadata cache'.

Page 270/325 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

• F# and the rose-tinted reflection

  - by CliveT

  We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

  Read the article

• Is SugarCRM really adequate for custom development (or adequate at all)? [closed]

  - by dukeofgaming

  Have you used SugarCRM for custom development successfully?, if so, have you done it programmatically or through the Module Builder? Were you successful? If not, why? I used SugarCRM for a project about two years ago, I ran into errors from the very installation, having to hack the actual installation file to deploy the software in the server and other erros that I can't recall now. Two years after, I'm picking it up for a project once again. I'm feeling like I should have developed the whole thing from scratch myself. Some examples: I couldn't install it in the server (again). I had to install it locally, then copy the files and database over to the server and manually edit the config file. Constantly getting deployment errors from the module builder. One reason is SugarCRM keeps creating a record in the upgrade_history table for a file that does not exist, I keep deleting such record and it keeps coming back corrupt. I get other deployment errors, but have not figured them out. then I have to rollback all files and database to try again. I deleted a custom module with relationships, the relationships stayed in the other modules and cannot be deleted anymore, PHP warnings all over the place. Quick create for custom modules does not appear, hack needed. Its whole cache directory is a joke, permanent data/files are stored there. The module builder interface disappears required fields. Edit the wrong thing, module builder won't deploy again, then pray Quick Repair and/or Rebuild Relationships do the trick. My impression of SugarCRM now is that, regardless of its pretty exterior and apparent functionality, it is a very low quality piece of software. This even scared me more: http://amplicate.com/hate/sugarcrm; a quote: I wis this info had been available when I tried to implement it 2 years ago... I searched high and low and the only info I found was positive. Yes, it's a piece of crap. The community edition was full of bugs... nothing worked. Essentially I got fired for implementing it. I'm glad though, because now I work for myself, am much happier and make more money... so, I should really thank SugarCRM for sucking so much I guess! I figured that perhaps some of you have had similar experiences, and have either sticked with SugarCRM or moved on to another solution. I'm very interested in knowing what your resolutions were -or your current situations are- to make up my own mind, since the project I'm working on is long term and I'm feeling SugarCRM will be more an obstacle than an aid. After further failed attempts to continue using this software I continued to stumble upon dead-ends when using the module editor, I could only recover from this errors by using version control. We are now moving on to a custom implementation using Symfony; perhaps if we were using it with its out-of-the-box modules we would have sticked with it.

  Read the article

• How to Create and Manage Contact Groups in Outlook 2010

  - by Mysticgeek

  If you find you’re sending emails to the same people all the time during the day, it’s tedious entering in their addresses individually. Today we take a look at creating Contact Groups to make the process a lot easier. Create Contact Groups Open Outlook and click on New Items \ More Items \ Contact Group. This opens the Contract Group window. Give your group a name, click on Add Members, and select the people you want to add from your Outlook Contacts, Address Book, or Create new ones. If you select from your address book you can scroll through and add the contacts you want. If you have a large amount of contacts you might want to search for them or use Advanced Find. If you want to add a new email contact to your group, you’ll just need to enter in their display name and email address then click OK. If you want the new member added to your Contacts list then make sure Add to Contacts is checked. After you have the contacts you want in the group, click Save & Close. Now when you compose a message you should be able to type in the name of the Contact Group you created… If you want to make sure you have everyone included in the group, click on the plus icon to expand the contacts. You will get a dialog box telling you the members of the group will be shown and you cannot collapse it again. Check the box not to see the message again then click OK. Then the members of the group will appear in the To field. Of course you can enter a Contact Group into the CC or Bcc fields as well. Add or Remove Members to a Contact Group After expanding the group you might notice some contacts aren’t included, or there is an old contact you don’t want to be in the group anymore. Click on the To button… Right-click on the Contact Group and select Properties. Now you can go ahead and Add Members… Or highlight a member and remove them…when finished click Save & Close. If you need to send emails to several of the same people, creating Contact Groups is a great way to save time by not entering them individually. If you work in for a large company, creating Contact Groups by department is a must! Similar Articles Productive Geek Tips Schedule Auto Send & Receive in Microsoft OutlookCreate An Electronic Business Card In Outlook 2007Create an Email Template in Outlook 2003Clear the Auto-Complete Email Address Cache in OutlookGet Maps and Directions to Your Contacts in Outlook 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor tinysong gives a shortened URL for you to post on Twitter (or anywhere)

  Read the article

• Is Linear Tape File System (LTFS) Best For Transportable Storage?

  - by rickramsey

  Those of us in tape storage engineering take a lot of pride in what we do, but understand that tape is the right answer to a storage problem only some of the time. And, unfortunately for a storage medium with such a long history, it has built up a few preconceived notions that are no longer valid. When I hear customers debate whether to implement tape vs. disk, one of the common strikes against tape is its perceived lack of usability. If you could go back a few generations of corporate acquisitions, you would discover that StorageTek engineers recognized this problem and started developing a solution where a tape drive could look just like a memory stick to a user. The goal was to not have to care about where files were on the cartridge, but to simply see the list of files that were on the tape, and click on them to open them up. Eventually, our friends in tape over at IBM built upon our work at StorageTek and Sun Microsystems and released the Linear Tape File System (LTFS) feature for the current LTO5 generation of tape drives as an open specification. LTFS is really a wonderful feature and we’re proud to have taken part in its beginnings and, as you’ll soon read, its future. Today we offer LTFS-Open Edition, which is free for you to use in your in Oracle Enterprise Linux 5.5 environment - not only on your LTO5 drives, but also on your Oracle StorageTek T10000C drives. You can download it free from Oracle and try it out. LTFS does exactly what its forefathers imagined. Now you can see immediately which files are on a cartridge. LTFS does this by splitting a cartridge into two partitions. The first holds all of the necessary metadata to create a directory structure for you to easily view the contents of the cartridge. The second partition holds all of the files themselves. When tape media is loaded onto a drive, a complete file system image is presented to the user. Adding files to a cartridge can be as simple as a drag-and-drop just as you do today on your laptop when transferring files from your hard drive to a thumb drive or with standard POSIX file operations. You may be thinking all of this sounds nice, but asking, “when will I actually use it?” As I mentioned at the beginning, tape is not the right solution all of the time. However, if you ever need to physically move data between locations, tape storage with LTFS should be your most cost-effective and reliable answer. I will give you a few use cases examples of when LTFS can be utilized. Media and Entertainment (M&E), Oil and Gas (O&G), and other industries have a strong need for their storage to be transportable. For example, an O&G company hunting for new oil deposits in remote locations takes very large underground seismic images which need to be shipped back to a central data center. M&E operations conduct similar activities when shooting video for productions. M&E companies also often transfers files to third-parties for editing and other activities. These companies have three highly flawed options for transporting data: electronic transfer, disk storage transport, or tape storage transport. The first option, electronic transfer, is impractical because of the expense of the bandwidth required to transfer multi-terabyte files reliably and efficiently. If there’s one place that has bandwidth, it’s your local post office so many companies revert to physically shipping storage media. Typically, M&E companies rely on transporting disk storage between sites even though it, too, is expensive. Tape storage should be the preferred format because as IDC points out, “Tape is more suitable for physical transportation of large amounts of data as it is less vulnerable to mechanical damage during transportation compared with disk" (See note 1, below). However, tape storage has not been used in the past because of the restrictions created by proprietary formats. A tape may only be readable if both the sender and receiver have the same proprietary application used to write the file. In addition, the workflows may be slowed by the need to read the entire tape cartridge during recall. LTFS solves both of these problems, clearing the way for tape to become the standard platform for transferring large files. LTFS is open and, as long as you’ve downloaded the free reader from our website or that of anyone in the LTO consortium, you can read the data. So if a movie studio ships a scene to a third-party partner to add, for example, sounds effects or a music score, it doesn’t have to care what technology the third-party has. If it’s written back to an LTFS-formatted tape cartridge, it can be read. Some tape vendors like to claim LTFS is a “standard,” but beauty is in the eye of the beholder. It’s a specification at this point, not a standard. That said, we’re already seeing application vendors create functionality to write in an LTFS format based on the specification. And it’s my belief that both customers and the tape storage industry will see the most benefit if we all follow the same path. As such, we have volunteered to lead the way in making LTFS a standard first with the Storage Network Industry Association (SNIA), and eventually through to standard bodies such as American National Standards Institute (ANSI). Expect to hear good news soon about our efforts. So, if storage transportability is one of your requirements, I recommend giving LTFS a look. It makes tape much more user-friendly and it’s free, which allows tape to maintain all of its cost advantages over disk! Note 1 - IDC Report. April, 2011. “IDC’s Archival Storage Solutions Taxonomy, 2011” - Brian Zents Website Newsletter Facebook Twitter

  Read the article

• The enterprise vendor con - connecting SSD's using SATA 2 (3Gbits) thus limiting there performance

  - by tonyrogerson

  When comparing SSD against Hard drive performance it really makes me cross when folk think comparing an array of SSD running on 3GBits/sec to hard drives running on 6GBits/second is somehow valid. In a paper from DELL (http://www.dell.com/downloads/global/products/pvaul/en/PowerEdge-PowerVaultH800-CacheCade-final.pdf) on increasing database performance using the DELL PERC H800 with Solid State Drives they compare four SSD drives connected at 3Gbits/sec against ten 10Krpm drives connected at 6Gbits [Tony slaps forehead while shouting DOH!]. It is true in the case of hard drives it probably doesn’t make much difference 3Gbit or 6Gbit because SAS and SATA are both end to end protocols rather than shared bus architecture like SCSI, so the hard drive doesn’t share bandwidth and probably can’t get near the 600MiBytes/second throughput that 6Gbit gives unless you are doing contiguous reads, in my own tests on a single 15Krpm SAS disk using IOMeter (8 worker threads, queue depth of 16 with a stripe size of 64KiB, an 8KiB transfer size on a drive formatted with an allocation size of 8KiB for a 100% sequential read test) I only get 347MiBytes per second sustained throughput at an average latency of 2.87ms per IO equating to 44.5K IOps, ok, if that was 3GBits it would be less – around 280MiBytes per second, oh, but wait a minute [...fingers tap desk] You’ll struggle to find in the commodity space an SSD that doesn’t have the SATA 3 (6GBits) interface, SSD’s are fast not only low latency and high IOps but they also offer a very large sustained transfer rate, consider the OCZ Agility 3 it so happens that in my masters dissertation I did the same test but on a difference box, I got 374MiBytes per second at an average latency of 2.67ms per IO equating to 47.9K IOps – cost of an 240GB Agility 3 is £174.24 (http://www.scan.co.uk/products/240gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-500mb-s-85k-iops), but that same drive set in a box connected with SATA 2 (3Gbits) would only yield around 280MiBytes per second thus losing almost 100MiBytes per second throughput and a ton of IOps too. So why the hell are “enterprise” vendors still only connecting SSD’s at 3GBits? Well, my conspiracy states that they have no interest in you moving to SSD because they’ll lose so much money, the argument that they use SATA 2 doesn’t wash, SATA 3 has been out for some time now and all the commodity stuff you buy uses it now. Consider the cost, not in terms of price per GB but price per IOps, SSD absolutely thrash Hard Drives on that, it was true that the opposite was also true that Hard Drives thrashed SSD’s on price per GB, but is that true now, I’m not so sure – a 300GByte 2.5” 15Krpm SAS drive costs £329.76 ex VAT (http://www.scan.co.uk/products/300gb-seagate-st9300653ss-savvio-15k3-25-hdd-sas-6gb-s-15000rpm-64mb-cache-27ms) which equates to £1.09 per GB compared to a 480GB OCZ Agility 3 costing £422.10 ex VAT (http://www.scan.co.uk/products/480gb-ocz-agility-3-ssd-25-sata-6gb-s-sandforce-2281-read-525mb-s-write-410mb-s-30k-iops) which equates to £0.88 per GB. Ok, I compared an “enterprise” hard drive with a “commodity” SSD, ok, so things get a little more complicated here, most “enterprise” SSD’s are SLC and most commodity are MLC, SLC gives more performance and wear, I’ll talk about that another day. For now though, don’t get sucked in by vendor marketing, SATA 2 (3Gbit) just doesn’t cut it, SSD need 6Gbit to breath and even that SSD’s are pushing. Alas, SSD’s are connected using SATA so all the controllers I’ve seen thus far from HP and DELL only do SATA 2 – deliberate? Well, I’ll let you decide on that one.

  Read the article

• Streaming desktop with avconv - severe sound issues

  - by Tommy Brunn

  I'm trying to do some live streaming in Ubuntu 12.10, but I'm having some problems with audio. More specifically, the quality is complete garbage and it's at least 10 seconds out of sync with the video. I'm using an excellent guide found here to set up my loopback devices so that I can combine the desktop audio with the microphone input. It seems to work, as I'm able to stream both audio and video to Twitch.tv. But, as I said, the audio quality is terrible. The microphone audio is very, very low, but if I increase it, I get a horrible garbled sound that is absolutely unbearable. Nothing like that is present during VoIP calls or when recording sound alone with the sound recorder, so it's not an issue with the microphone itself. The entire audio stream is also delayed about 10-15 seconds compared to the video stream. I put together an imgur album of my settings. Here is some example output from when I'm streaming: avconv version 0.8.4-6:0.8.4-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Nov 6 2012 16:51:11 with gcc 4.7.2 [x11grab @ 0x162fd80] device: :0.0+570,262 -> display: :0.0 x: 570 y: 262 width: 1280 height: 720 [x11grab @ 0x162fd80] shared memory extension found [x11grab @ 0x162fd80] Estimating duration from bitrate, this may be inaccurate Input #0, x11grab, from ':0.0+570,262': Duration: N/A, start: 1353181686.735113, bitrate: 884736 kb/s Stream #0.0: Video: rawvideo, bgra, 1280x720, 884736 kb/s, 30 tbr, 1000k tbn, 30 tbc [alsa @ 0x163fce0] capture with some ALSA plugins, especially dsnoop, may hang. [alsa @ 0x163fce0] Estimating duration from bitrate, this may be inaccurate Input #1, alsa, from 'pulse': Duration: N/A, start: 1353181686.773841, bitrate: N/A Stream #1.0: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s Incompatible pixel format 'bgra' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 0x1641ec0] w:1280 h:720 pixfmt:bgra [scale @ 0x1642480] w:1280 h:720 fmt:bgra -> w:852 h:480 fmt:yuv420p flags:0x4 [libx264 @ 0x165ae80] VBV maxrate unspecified, assuming CBR [libx264 @ 0x165ae80] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x165ae80] profile Main, level 3.1 [libx264 @ 0x165ae80] 264 - core 123 r2189 35cf912 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=0 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=4 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=0 b_adapt=1 b_bias=0 direct=1 weightb=0 open_gop=1 weightp=1 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=30 rc=cbr mbtree=1 bitrate=712 ratetol=1.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 vbv_maxrate=712 vbv_bufsize=512 nal_hrd=none ip_ratio=1.25 aq=1:1.00 Output #0, flv, to 'rtmp://live.justin.tv/app/live_23011330_Pt1plSRM0z5WVNJ0QmCHvTPmpUnfC4': Metadata: encoder : Lavf53.21.0 Stream #0.0: Video: libx264, yuv420p, 852x480, q=-1--1, 712 kb/s, 1k tbn, 30 tbc Stream #0.1: Audio: libmp3lame, 44100 Hz, 2 channels, s16, 712 kb/s Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> libx264) Stream #1:0 -> #0:1 (pcm_s16le -> libmp3lame) Press ctrl-c to stop encoding frame= 17 fps= 0 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 32 fps= 31 q=0.0 size= 0kB time=10000000000.00 bitrate= 0.0kbitframe= 40 fps= 23 q=29.0 size= 44kB time=0.03 bitrate=13786.2kbits/s dup=frame= 47 fps= 21 q=31.0 size= 93kB time=2.73 bitrate= 277.7kbits/s dup=0frame= 62 fps= 23 q=29.0 size= 160kB time=3.23 bitrate= 406.2kbits/s dup=0frame= 77 fps= 24 q=23.0 size= 209kB time=3.71 bitrate= 462.5kbits/s dup=0frame= 92 fps= 25 q=20.0 size= 267kB time=4.91 bitrate= 445.2kbits/s dup=0frame= 107 fps= 25 q=20.0 size= 318kB time=5.41 bitrate= 482.1kbits/s dup=0frame= 123 fps= 26 q=18.0 size= 368kB time=5.96 bitrate= 505.7kbits/s dup=0frame= 139 fps= 26 q=16.0 size= 419kB time=6.48 bitrate= 529.7kbits/s dup=0frame= 155 fps= 27 q=15.0 size= 473kB time=7.00 bitrate= 553.6kbits/s dup=0frame= 170 fps= 27 q=14.0 size= 525kB time=7.52 bitrate= 571.7kbits/s dup=0 frame= 180 fps= 25 q=-1.0 Lsize= 652kB time=7.97 bitrate= 670.0kbits/s dup=0 drop=32 //Here I stop the streaming video:531kB audio:112kB global headers:0kB muxing overhead 1.345945% [libx264 @ 0x165ae80] frame I:1 Avg QP:30.43 size: 39748 [libx264 @ 0x165ae80] frame P:45 Avg QP:11.37 size: 11110 [libx264 @ 0x165ae80] frame B:134 Avg QP:15.93 size: 27 [libx264 @ 0x165ae80] consecutive B-frames: 0.6% 0.0% 1.7% 97.8% [libx264 @ 0x165ae80] mb I I16..4: 7.3% 0.0% 92.7% [libx264 @ 0x165ae80] mb P I16..4: 0.1% 0.0% 0.1% P16..4: 49.1% 1.2% 2.1% 0.0% 0.0% skip:47.4% [libx264 @ 0x165ae80] mb B I16..4: 0.0% 0.0% 0.0% B16..8: 0.1% 0.0% 0.0% direct: 0.0% skip:99.9% L0:42.5% L1:56.9% BI: 0.6% [libx264 @ 0x165ae80] coded y,uvDC,uvAC intra: 82.3% 87.4% 71.9% inter: 7.1% 8.4% 7.0% [libx264 @ 0x165ae80] i16 v,h,dc,p: 27% 29% 16% 28% [libx264 @ 0x165ae80] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 22% 21% 14% 8% 8% 8% 7% 5% 7% [libx264 @ 0x165ae80] i8c dc,h,v,p: 47% 22% 20% 11% [libx264 @ 0x165ae80] Weighted P-Frames: Y:0.0% UV:0.0% [libx264 @ 0x165ae80] ref P L0: 96.4% 3.6% [libx264 @ 0x165ae80] kb/s:474.19 Received signal 2: terminating. Any ideas on how I can resolve this? The video delay is perfectly acceptable, so I wouldn't think that it's a network issue that's causing the delay in the audio. Any help would be appreciated.

  Read the article

• Silverlight Cream for February 21, 2011 -- #1049

  - by Dave Campbell

  In this Issue: Rob Eisenberg(-2-), Gill Cleeren, Colin Eberhardt, Alex van Beek, Ishai Hachlili, Ollie Riches, Kevin Dockx, WindowsPhoneGeek(-2-), Jesse Liberty(-2-), and John Papa. Above the Fold: Silverlight: "Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4" Alex van Beek WP7: "Google Sky on Windows Phone 7" Colin Eberhardt Shoutouts: My friends at SilverlightShow have their top 5 for last week posted: SilverlightShow for Feb 14 - 20, 2011 From SilverlightCream.com: Rob Eisenberg MVVMs Us with Caliburn.Micro! Rob Eisenberg chats with Carl and Richard on .NET Rocks episode 638 about Caliburn.Micro which takes Convention-over-Configuration further, utilizing naming conventions to handle a large number of data binding, validation and other action-based characteristics in your app. Two Caliburn Releases in One Day! Rob Eisenberg also announced that release candidates for both Caliburn 2.0 and Caliburn.Micro 1.0 are now available. Check out the docs and get the bits. Getting ready for Microsoft Silverlight Exam 70-506 (Part 6) Gill Cleeren has Part 6 of his series on getting ready for the Silverlight Exam up at SilverlightShow.... this time out, Gill is discussing app startup, localization, and using resource dictionaries, just to name a few things. Google Sky on Windows Phone 7 Colin Eberhardt has a very cool WP7 app described where he's using Google Sky as the tile source for Bing Maps, and then has a list of 110 Messier Objects.. interesting astronomical objects that you can look at... all with source! Silverlight 4: Creating useful base classes for your views and viewmodels with PRISM 4 Alex van Beek has some Prism4/Unity MVVM goodness up with this discussion of a login module using View and ViewModel base classes. Windows Phone 7 and WCF REST – Authentication Solutions Ishai Hachlili sent me this link to his post about WCF REST web service and authentication for WP7, and he offers up 2 solutions... from the looks of this, I'm also putting his blog on my watch list WP7Contrib: Isolated Storage Cache Provider Ollie Riches has a complete explanation and code example of using the IsolatedStorageCacheProvider in their WP7Contrib library. Using a ChannelFactory in Silverlight, part two: binary cows & new-born calves Kevin Dockx follows-up his post on Channel Factories with this part 2, expanding the knowledge-base into usin parameters and custom binding with binary encoding, both from reader suggestions. All about UriMapping in WP7 WindowsPhoneGeek has a post up about URI mappings in WP7 ... what it is, how to enable it in code behind or XAML, then using it either with a hyperlink button or via the NavigationService class... all with code. Passing WP7 Memory Consumption requirements with the Coding4Fun MemoryCounter tool WindowsPhoneGeek's latest is a tutorial on the use of the Memory Counter control from the Coding4Fun toolkit and WP7 Memory consumption. Getting Started With Linq Jesse Liberty gets into LINQ in his Episode 33 of his WP7 'From Scratch' series... looks like a good LINQ starting point, and he's going to be doing a series on it. Linq with Objects In his second post on LINQ, Jesse Liberty is looking at creating a Linq query against a collection of objects... always good stuff, Jesse! Silverlight TV Silverlight TV 62: The Silverlight 5 Triad Unplugged John Papa is joined by Sam George, Larry Olson, and Vijay Devetha (the Silverlight Triad) on this Silverlight TV episode 62 to discuss how the team works together, and hey... they're hiring! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Design review for application facing memory issues

  - by Mr Moose

  I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

  Read the article

• WIF, ADFS 2 and WCF&ndash;Part 6: Chaining multiple Token Services

  - by Your DisplayName here!

  See the previous posts first. So far we looked at the (simpler) scenario where a client acquires a token from an identity provider and uses that for authentication against a relying party WCF service. Another common scenario is, that the client first requests a token from an identity provider, and then uses this token to request a new token from a Resource STS or a partner’s federation gateway. This sounds complicated, but is actually very easy to achieve using WIF’s WS-Trust client support. The sequence is like this: Request a token from an identity provider. You use some “bootstrap” credential for that like Windows integrated, UserName or a client certificate. The realm used for this request is the identifier of the Resource STS/federation gateway. Use the resulting token to request a new token from the Resource STS/federation gateway. The realm for this request would be the ultimate service you want to talk to. Use this resulting token to authenticate against the ultimate service. Step 1 is very much the same as the code I have shown in the last post. In the following snippet, I use a client certificate to get a token from my STS: private static SecurityToken GetIdPToken() {     var factory = new WSTrustChannelFactory(         new CertificateWSTrustBinding(SecurityMode.TransportWithMessageCredential,         idpEndpoint);     factory.TrustVersion = TrustVersion.WSTrust13;       factory.Credentials.ClientCertificate.SetCertificate(         StoreLocation.CurrentUser,         StoreName.My,         X509FindType.FindBySubjectDistinguishedName,         "CN=Client");       var rst = new RequestSecurityToken     {         RequestType = RequestTypes.Issue,         AppliesTo = new EndpointAddress(rstsRealm),         KeyType = KeyTypes.Symmetric     };       var channel = factory.CreateChannel();     return channel.Issue(rst); } To use a token to request another token is slightly different. First the IssuedTokenWSTrustBinding is used and second the channel factory extension methods are used to send the identity provider token to the Resource STS: private static SecurityToken GetRSTSToken(SecurityToken idpToken) {     var binding = new IssuedTokenWSTrustBinding();     binding.SecurityMode = SecurityMode.TransportWithMessageCredential;       var factory = new WSTrustChannelFactory(         binding,         rstsEndpoint);     factory.TrustVersion = TrustVersion.WSTrust13;     factory.Credentials.SupportInteractive = false;       var rst = new RequestSecurityToken     {         RequestType = RequestTypes.Issue,         AppliesTo = new EndpointAddress(svcRealm),         KeyType = KeyTypes.Symmetric     };       factory.ConfigureChannelFactory();     var channel = factory.CreateChannelWithIssuedToken(idpToken);     return channel.Issue(rst); } For this particular case I chose an ADFS endpoint for issued token authentication (see part 1 for more background). Calling the service now works exactly like I described in my last post. You may now wonder if the same thing can be also achieved using configuration only – absolutely. But there are some gotchas. First of all the configuration files becomes quite complex. As we discussed in part 4, the bindings must be nested for WCF to unwind the token call-stack. But in this case svcutil cannot resolve the first hop since it cannot use metadata to inspect the identity provider. This binding must be supplied manually. The other issue is around the value for the realm/appliesTo when requesting a token for the R-STS. Using the manual approach you have full control over that parameter and you can simply use the R-STS issuer URI. Using the configuration approach, the exact address of the R-STS endpoint will be used. This means that you may have to register multiple R-STS endpoints in the identity provider. Another issue you will run into is, that ADFS does only accepts its configured issuer URI as a known realm by default. You’d have to manually add more audience URIs for the specific endpoints using the ADFS Powershell commandlets. I prefer the “manual” approach. That’s it. Hope this is useful information.

  Read the article

• EPM and Business Analytics Talking-head Videos from Oracle OpenWorld 2013

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE Here is a selection of 2 to 3 minute video interviews at this year’s Oracle OpenWorld: 1. George Somogyi, Solutions Architect, New Edge Group, talks about the importance of having their integrated Oracle Hyperion Platform consisting of Oracle Hyperion Financial Management, Oracle Hyperion Financial Data Quality Management, Oracle E-Business Suite R12 and Oracle Business Intelligence Extended Edition plus their use of Oracle Managed Cloud Services. Speaker: George Somogyi @ http://youtu.be/kWn0dQxCUy8 2. Gregg Thompson, Director of Financial Systems for ADT, talks about using Oracle Data Relationship Management prior to implementing an Enterprise Performance Management solution. Gregg confirmed that there are big benefits to bringing the full Oracle Hyperion Financial Close suite online with Oracle DRM as the metadata source. Reduced maintenance time and use of external consultants translates into significant time and cost savings and faster implementation times. Speaker: Gregg Thompson @ http://youtu.be/XnFrR9Uk4xk 3. Jeff Spangler, Director Financial Planning and Analysis for Speedy Cash Holdings Corp, talked to us about the benefits achieved through implementing Oracle Hyperion Planning and financial reporting solutions. He also describes how the use of Data Relationship Management will keep the process running smoothly now and in the future. Speaker: Jeff Spangler @ http://youtu.be/kkkuMkgJ22U 4. Marc Seewald, Senior Director of Product Management for Oracle Hyperion Tax Provision at Oracle, talks about Oracle Hyperion Tax Provision, how it is an integral part of the financial close process and that it provides better internal controls and automation of this task. Marc talks about Oracle Partners and customers alike who are seeing great value. Speaker: Marc Seewald @ http://youtu.be/lM_nfvACGuA 5. Matt Bradley, SVP of Product Development for Enterprise Performance Management (EPM) Applications at Oracle, talked to us about different deployment options for Oracle EPM. Cloud services (SaaS), managed services, on-premise, off-premise all have their merits, and organizations need flexibility to easily move between them as their companies evolve. Speaker: Matt Bradley @ http://youtu.be/ATO7Z9dbE-o 6. Neil Sellers, Partner, Qubix International talks about their experience with previewing Oracle’s new Planning and Budgeting Cloud Service. He describes the benefits of the step-by-step task lists, the speed of getting the application up and running, and the huge benefits of not having to manage the software and hardware side of the planning process. Speaker: Neil Sellers @ http://youtu.be/xmosO28e4_I 7. Praveen Pasupuleti, Senior Business Intelligence Development Manager of Citrix Systems Inc., talks about their Oracle Hyperion Planning upgrade and the huge performance improvement now experienced in forecasting. He also talked about the benefits of Oracle Hyperion Workforce Planning achieved by Citrix. Speaker: Praveen Pasupuleti @ http://youtu.be/d1e_4hLqw8c 8. CheckPoint Consulting, talked to us about how Enterprise Performance Management should be viewed as an entire solution, rather than as a bunch of applications in silos, to provide significant benefits; and how Data Relationship Management can tie it all together effectively. Speaker: Ron Dimon @ http://youtu.be/sRwbdbbXvUE 9. Sonal Kulkarni, Enterprise Performance Management Leader, Cummins Inc., talks about their use of Oracle Hyperion Financial Close Management (Account Reconciliation Manager), Oracle Hyperion Financial Management and Oracle Hyperion Financial Data Quality Management and how this is providing efficiency, visibility and compliance benefits. Speaker: Sonal Kulkarni @ http://youtu.be/OEgup5dKyVc 10. Todd Renard, Manager Financial Planning and Business Analytics for B/E Aerospace Inc., talks about the huge benefits that B/E Aerospace is experiencing from Oracle Financial Close Suite. He was extremely excited about Oracle Hyperion Financial Data Quality Management and how this helps them integrate a new business in as little as three weeks. Speaker: Todd Renard @ http://youtu.be/nIfqK46uVI8 11. Peter Smolianski, Chief Technology Officer for the District of Columbia Courts, talked to us about how D.C. Courts is using Oracle Scorecard and Strategy Management to push their 5 year plan forward, to report results to their constituents, and take accountability for process changes to become more efficient. Speaker: Peter Smolianski @ http://www.youtube.com/watch?v=T-DtB5pl-uk 12. Rich Wilkie, Senior Director of Product Management for Financial Close Suite at Oracle, talked to us about Oracle Financial Management Analytics. He told us how the prebuilt dashboards on top of Oracle Hyperion Financial Close Suite make it easy for everyone to see the numbers and understand where they are in the close process, and if there is an issue, they can see where it is. Executives are excited to get this information on mobile devices too. Speaker: Rich Wilkie @ http://www.youtube.com/watch?v=4UHuHgx74Yg 13. Dinesh Balebail, Senior Director of Software Development for Oracle Hyperion Profitability and Cost Management, talked to us about the power and speed of Oracle Hyperion Profitability and Cost Management and how it is being used to do deep costing for Telecoms, Hospitals, Banks and other high transaction volume organizations effectively. Speaker: Dinesh Balebail @ http://youtu.be/ivx5AZCXAfs /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman"; mso-ansi-language:EN-US; mso-fareast-language:EN-US;}

  Read the article

• MCM Lab exam this week

  - by Rob Farley

  In two days I’ll’ve finished the MCM Lab exam, 88-971. If you do an internet search for 88-971, it’ll tell you the answer is –883. Obviously. It’ll also give you a link to the actual exam page, which is useful too, once you’ve finished being distracted by the calculator instead of going to the thing you’re actually looking for. (Do people actually search the internet for the results of mathematical questions? Really?) The list of Skills Measured for this exam is quite short, but can essentially be broken down into one word “Anything”. The Preparation Materials section is even better. Classroom Training – none available. Microsoft E-Learning – none available. Microsoft Press Books – none available. Practice Tests – none available. But there are links to Readiness Videos and a page which has no resources listed, but tells you a list of people who have already qualified. Three in Australia who have MCM SQL Server 2008 so far. The list doesn’t include some of the latest batch, such as Jason Strate or Tom LaRock. I’ve used SQL Server for almost 15 years. During that time I’ve been awarded SQL Server MVP seven times, but the MVP award doesn’t actually mean all that much when considering this particular certification. I know lots of MVPs who have tried this particular exam and failed – including Jason and Tom. Right now, I have no idea whether I’ll pass or not. People tell me I’ll pass no problem, but I honestly have no idea. There’s something about that “Anything” aspect that worries me. I keep looking at the list of things in the Readiness Videos, and think to myself “I’m comfortable with Resource Governor (or whatever) – that should be fine.” Except that then I feel like I maybe don’t know all the different things that can go wrong with Resource Governor (or whatever), and I wonder what kind of situations I’ll be faced with. And then I find myself looking through the stuff that’s explained in the videos, and wondering what kinds of things I should know that I don’t, and then I get amazingly bored and frustrated (after all, I tell people that these exams aren’t supposed to be studied for – you’ve been studying for the last 15 years, right?), and I figure “What’s the worst that can happen? A fail?” I’m told that the exam provides a list of scenarios (maybe 14 of them?) and you have 5.5 hours to complete them. When I say “complete”, I mean complete – you don’t get to leave them unfinished, that’ll get you ‘nil points’ for that scenario. Apparently no-one gets to complete all of them. Now, I’m a consultant. I get called on to fix the problems that people have on their SQL boxes. Sometimes this involves fixing corruption. Sometimes it’s figuring out some performance problem. Sometimes it’s as straight forward as getting past a full transaction log; sometimes it’s as tricky as recovering a database that has lost its metadata, without backups. Most situations aren’t a problem, but I also have the confidence of being able to do internet searches to verify my maths (in case I forget it’s –883). In the exam, I’ll have maybe twenty minutes per scenario (but if I need longer, I’ll have to take longer – no point in stopping half way if it takes more than twenty minutes, unless I don’t see an end coming up), so I’ll have time constraints too. And of course, I won’t have any of my usual tools. I can’t take scripts in, I can’t take staff members. Hopefully I can use the coffee machine that will be in the room. I figure it’s going to feel like one of those days when I’ve gone into a client site, and found that the problems are way worse than I expected, and that the site is down, with people standing over me needing me to get things right first time... ...so it should be fine, I’ve done that before. :) If I do fail, it won’t make me any less of a consultant. It won’t make me any less able to help all of my clients (including you if you get in touch – hehe), it’ll just mean that the particular problem might’ve taken me more than the twenty minutes that the exam gave me. @rob_farley PS: Apparently the done thing is to NOT advertise that you’re sitting the exam at a particular time, only that you’re expecting to take it at some point in the future. I think it’s akin to the idea of not telling people you’re pregnant for the first few months – it’s just in case the worst happens. Personally, I’m happy to tell you all that I’m going to take this exam the day after tomorrow (which is the 19th in the US, the 20th here). If I end up failing, you can all commiserate and tell me that I’m not actually as unqualified as I feel.

  Read the article

• Branching and Merging Improvements in TFS2010

  - by jehan

  Introducing the concept of “first class branches” is a significant improvement as part of the 2010 release with respect to version control.  Not only does it help to distinguish between folders and branches, but it enables branch visualizations. Let us see improvements in detail. ·         In TFS2008, you don’t know which of the folders are Branches: All folders looks the same, all have the folder icon. Now, In TFS 2010 there is a new icon that shows which of the folder is a Branch.       ·      There is no visual means to manage branches in TFS2008:   You dont have any means to identify which branches are related and the relation type. Now, In TFS 2010 you have visual tools to see the Branches Hierarchy. In order to see a Branch Hierarchy just Right Click the Branch and choose: Branching and Merging –> View Hierarchy     ·         In TFS2008, there is no option to track changes path between the Branches:  If you have made a merge in a Branch you can’t track from which Branch this Merge came from. Now, you have the tools that shows the path of change between the Branches, you can also see where change was added on a timeline.  In order to track a change do the following: Step1: Right click the Branch and click View History   Step 2: Choose a changeset to track and click the “Track Changeset” button.     Step 3: Choose the branches that will be in the view and click “Visualize”. In above visual, you can see that Changesets 108,109,110 and 119 where merged from Main to Release1.0 Branch and then “Release_1.0” Branched to “Dev1.0. Step4: You can also see the Merges on a Timeline by clicking on the “Timeline Tracking” button.   Creating New Branches: In TFS 2010, the creation of branches has been streamlined a bit from the process in 2008.  In 2008, creating a new branch was like every other action in the system – changes were pended on the client, and then checked in to the server. Because of this creating new branch in TFS2008 was time-consuming process.  In TFS2010, the step where changes are pended has been bypassed and now performing the branch creation is entirely on the server.  With this approach, the round trip time for downloading a copy of each file on the branch and then uploading each file again has been eliminated.  Note: In TFS2010, the new branch will be created and committed as a single operation on the server. Pending changes will not be created, it doesn’t require a check-in as it will be carried out as a single operation and it’s not possible to cancel.     Manage Branch Permissions: The properties view for branches is also different than that of ordinary folders or file, containing some metadata for the branch, relationship information, and permissions for the branch. In TFS2008, the users who have checkout and Check-in permissions can create a branch. But, In TFS2010 you can control the permissions for Branches using Manage Branch permissions.   Reparent option in TFS2010: In TFS2008, if we have two branches which don’t have parent-child relation and we want perform merge between these two branches then we have to perform baseless merge using tf.exe command line. I have two branches Release_1.0 and Dev1.0_F2 which don’t have any relation between them, that’s why when I click on merge option in Release_1.0, in Target Branch it’s not showing Dev1.0_F2 branch to perform the merges.     Let us see what can we do for this in TFS2010, first perform a TFS baseless merge to establish a relationship between the parent branch and the child branches.  It will only merge the folder, not its contents. TFS baseless merges are performed via the command line using VS2010 command prompt and do the following:   tf merge /baseless <ParentBranch> <childBranch> Check in your pending changes. It will create the link between the branches but the relationships are still not completed.  Now, select the child branch in Source Control Explorer and from the File menu choose Source Control –> Branching and Merging –> Reparent.      In the dialog box,  choose the appropriate branch as the new parent.   Click Reparent and then go to parent branch and click merge. Now, will see that in Target Branch option Dev1.0_F2 branch is added.         Converting Folders to Branches and Branches to Folders: You can convert any Folder as Branch from Context Menu by performing right click on the folderàBranching and MergingàConvert to Branch. In similar way, you can convert the Branches to Folder using Convert to Folder option available in File Menu (FileàSource ControlàBranching and MergingàConvert to Branch). This option is not available in context menu.

  Read the article

• Integration Patterns with Azure Service Bus Relay, Part 2: Anonymous full-trust .NET consumer

  - by Elton Stoneman

  This is the second in the IPASBR series, see also: Integration Patterns with Azure Service Bus Relay, Part 1: Exposing the on-premise service Part 2 is nice and easy. From Part 1 we exposed our service over the Azure Service Bus Relay using the netTcpRelayBinding and verified we could set up our network to listen for relayed messages. Assuming we want to consume that service in .NET from an environment which is fairly unrestricted for us, but quite restricted for attackers, we can use netTcpRelay and shared secret authentication. Pattern applicability This is a good fit for scenarios where: the consumer can run .NET in full trust the environment does not restrict use of external DLLs the runtime environment is secure enough to keep shared secrets the service does not need to know who is consuming it the service does not need to know who the end-user is So for example, the consumer is an ASP.NET website sitting in a cloud VM or Azure worker role, where we can keep the shared secret in web.config and we don't need to flow any identity through to the on-premise service. The service doesn't care who the consumer or end-user is - say it's a reference data service that provides a list of vehicle manufacturers. Provided you can authenticate with ACS and have access to Service Bus endpoint, you can use the service and it doesn't care who you are. In this post, we’ll consume the service from Part 1 in ASP.NET using netTcpRelay. The code for Part 2 (+ Part 1) is on GitHub here: IPASBR Part 2 Authenticating and authorizing with ACS In this scenario the consumer is a server in a controlled environment, so we can use a shared secret to authenticate with ACS, assuming that there is governance around the environment and the codebase which will prevent the identity being compromised. From the provider's side, we will create a dedicated service identity for this consumer, so we can lock down their permissions. The provider controls the identity, so the consumer's rights can be revoked. We'll add a new service identity for the namespace in ACS , just as we did for the serviceProvider identity in Part 1. I've named the identity fullTrustConsumer. We then need to add a rule to map the incoming identity claim to an outgoing authorization claim that allows the identity to send messages to Service Bus (see Part 1 for a walkthrough creating Service Idenitities): Issuer: Access Control Service Input claim type: http://schemas.xmlsoap.org/ws/2005/05/identity/claims/nameidentifier Input claim value: fullTrustConsumer Output claim type: net.windows.servicebus.action Output claim value: Send This sets up a service identity which can send messages into Service Bus, but cannot register itself as a listener, or manage the namespace. Adding a Service Reference The Part 2 sample client code is ready to go, but if you want to replicate the steps, you’re going to add a WSDL reference, add a reference to Microsoft.ServiceBus and sort out the ServiceModel config. In Part 1 we exposed metadata for our service, so we can browse to the WSDL locally at: http://localhost/Sixeyed.Ipasbr.Services/FormatService.svc?wsdl If you add a Service Reference to that in a new project you'll get a confused config section with a customBinding, and a set of unrecognized policy assertions in the namespace http://schemas.microsoft.com/netservices/2009/05/servicebus/connect. If you NuGet the ASB package (“windowsazure.servicebus”) first and add the service reference - you'll get the same messy config. Either way, the WSDL should have downloaded and you should have the proxy code generated. You can delete the customBinding entries and copy your config from the service's web.config (this is already done in the sample project in Sixeyed.Ipasbr.NetTcpClient), specifying details for the client:     <client>       <endpoint address="sb://sixeyed-ipasbr.servicebus.windows.net/net"                 behaviorConfiguration="SharedSecret"                 binding="netTcpRelayBinding"                 contract="FormatService.IFormatService" />     </client>     <behaviors>       <endpointBehaviors>         <behavior name="SharedSecret">           <transportClientEndpointBehavior credentialType="SharedSecret">             <clientCredentials>               <sharedSecret issuerName="fullTrustConsumer"                             issuerSecret="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/>             </clientCredentials>           </transportClientEndpointBehavior>         </behavior>       </endpointBehaviors>     </behaviors>   The proxy is straight WCF territory, and the same client can run against Azure Service Bus through any relay binding, or directly to the local network service using any WCF binding - the contract is exactly the same. The code is simple, standard WCF stuff: using (var client = new FormatService.FormatServiceClient()) { outputString = client.ReverseString(inputString); } Running the sample First, update Solution Items\AzureConnectionDetails.xml with your service bus namespace, and your service identity credentials for the netTcpClient and the provider:   <!-- ACS credentials for the full trust consumer (Part2): -->   <netTcpClient identityName="fullTrustConsumer"                 symmetricKey="E3feJSMuyGGXksJi2g2bRY5/Bpd2ll5Eb+1FgQrXIqo="/> Then rebuild the solution and verify the unit tests work. If they’re green, your service is listening through Azure. Check out the client by navigating to http://localhost:53835/Sixeyed.Ipasbr.NetTcpClient. Enter a string and hit Go! - your string will be reversed by your on-premise service, routed through Azure: Using shared secret client credentials in this way means ACS is the identity provider for your service, and the claim which allows Send access to Service Bus is consumed by Service Bus. None of the authentication details make it through to your service, so your service is not aware who the consumer is (MSDN calls this "anonymous authentication").

  Read the article

• Upgrades in 5 Easy Pieces

  - by Anne R.

  Even though there are a few select tasks that I have to do once or twice a year, I can’t remember how to do them! Or where to find the bits and pieces to complete the task. So I love it when someone consolidates everything under one spot. That’s what the CRM On Demand team has done with the upgrade information. Specifically, they have: Provided a “one-stop” area for managing upgrades at your company. Broken down the upgrade process into 5 (yes, 5) steps. Explained when and how to perform each step with dates specific to your pod. Included details about each step, visible by expanding the step. Translated the steps into 11 languages. Added a list of release-specific resources with links from the page. Now, just head for the Training and Support portal, click the Release Info tab, and walk through the “5 Essential Steps to a Successful Upgrade.” Before you continue, though, select your language from the drop-down list on the Release Info page. CRM On Demand now has the upgrade steps translated into 11 languages. On the Step page, you can expand each section in sequence and follow the more detailed instructions that appear. This will ensure that you’ve covered all your bases for each upgrade. Here’s a shortened version of the information that you’ll find: 1. Verify your Primary Contact Information. Have you checked your primary contact information to make sure you’re being notified of all upgrade information? Or do you want more users to receive upgrade announcements? This section provides you with the navigation path to do that in CRM On Demand. 2. Review your Key Upgrade Dates. If you expand this step, a nice table appears with your critical dates for the various milestones. IMPORTANT: When your CRM On Demand pod has been officially added to the upgrade schedule, closer to the release date itself, this table will display your specific timetable. 3. Migrate your Customizations from the Staging Environment before the Snapshot Date. Oracle refreshes the Staging data with a copy of your Production data made on the Production Snapshot Date. So this section lists considerations relevant to this step. It also reminds you of the 2-week period when you should not be making any changes in your Staging environment.   4. Conduct your Upgrade Validation on the Staging Environment. When the Customer Validation Testing period begins, you need to log in to your Staging Environment to validate that your key business processes and customizations continue to behave as expected. If your company utilizes Web Services, Web Links, Web Applets or Workflow, focus on testing these first. You generally have about two weeks for testing. If you run into problems during this time, follow the instructions shown in this section for logging a service request. It describes exactly how to fill out the fields in the SR for the fastest resolution. 5. Conduct "White Glove" Testing in your Upgraded Production Environment. Before users start using the upgrade, you should access a few tabs and reports. Doing this actually warms up the cache so that frequently used pages and reports will come up at normal speed on Monday morning, when users log in to the upgraded system. Resources listed under this step help you in further preparing for the upgrade. Now there’s also a new Documentation section on the right with links to these release-specific resources.   Very nice, I commented, when discussing these improvements with the “responsible party.” She confirmed that, yes, they tried to consolidate the upgrade information, translate it for better communication, simplify it into 5 easy pieces, and drive admins responsible for handling upgrades to this one site instead of sending out elaborate emails. Yes, I just love it when someone practically reaches out and holds my hand through a process. Next best thing to a wizard!

  Read the article

• Breaking through the class sealing

  - by Jason Crease

  Do you understand 'sealing' in C#?  Somewhat?  Anyway, here's the lowdown. I've done this article from a C# perspective, but I've occasionally referenced .NET when appropriate. What is sealing a class? By sealing a class in C#, you ensure that you ensure that no class can be derived from that class.  You do this by simply adding the word 'sealed' to a class definition: public sealed class Dog {} Now writing something like " public sealed class Hamster: Dog {} " you'll get a compile error like this: 'Hamster: cannot derive from sealed type 'Dog' If you look in an IL disassembler, you'll see a definition like this: .class public auto ansi sealed beforefieldinit Dog extends [mscorlib]System.Object Note the addition of the word 'sealed'. What about sealing methods? You can also seal overriding methods.  By adding the word 'sealed', you ensure that the method cannot be overridden in a derived class.  Consider the following code: public class Dog : Mammal { public sealed override void Go() { } } public class Mammal { public virtual void Go() { } } In this code, the method 'Go' in Dog is sealed.  It cannot be overridden in a subclass.  Writing this would cause a compile error: public class Dachshund : Dog { public override void Go() { } } However, we can 'new' a method with the same name.  This is essentially a new method; distinct from the 'Go' in the subclass: public class Terrier : Dog { public new void Go() { } } Sealing properties? You can also seal seal properties.  You add 'sealed' to the property definition, like so: public sealed override string Name {     get { return m_Name; }     set { m_Name = value; } } In C#, you can only seal a property, not the underlying setters/getters.  This is because C# offers no override syntax for setters or getters.  However, in underlying IL you seal the setter and getter methods individually - a property is just metadata. Why bother sealing? There are a few traditional reasons to seal: Invariance. Other people may want to derive from your class, even though your implementation may make successful derivation near-impossible.  There may be twisted, hacky logic that could never be second-guessed by another developer.  By sealing your class, you're protecting them from wasting their time.  The CLR team has sealed most of the framework classes, and I assume they did this for this reason. Security.  By deriving from your type, an attacker may gain access to functionality that enables him to hack your system.  I consider this a very weak security precaution. Speed.  If a class is sealed, then .NET doesn't need to consult the virtual-function-call table to find the actual type, since it knows that no derived type can exist.  Therefore, it could emit a 'call' instead of 'callvirt' or at least optimise the machine code, thus producing a performance benefit.  But I've done trials, and have been unable to demonstrate this If you have an example, please share! All in all, I'm not convinced that sealing is interesting or important.  Anyway, moving-on... What is automatically sealed? Value types and structs.  If they were not always sealed, all sorts of things would go wrong.  For instance, structs are laid-out inline within a class.  But what if you assigned a substruct to a struct field of that class?  There may be too many fields to fit. Static classes.  Static classes exist in C# but not .NET.  The C# compiler compiles a static class into an 'abstract sealed' class.  So static classes are already sealed in C#. Enumerations.  The CLR does not track the types of enumerations - it treats them as simple value types.  Hence, polymorphism would not work. What cannot be sealed? Interfaces.  Interfaces exist to be implemented, so sealing to prevent implementation is dumb.  But what if you could prevent interfaces from being extended (i.e. ban declarations like "public interface IMyInterface : ISealedInterface")?  There is no good reason to seal an interface like this.  Sealing finalizes behaviour, but interfaces have no intrinsic behaviour to finalize Abstract classes.  In IL you can create an abstract sealed class.  But C# syntax for this already exists - declaring a class as a 'static', so it forces you to declare it as such. Non-override methods.  If a method isn't declared as override it cannot be overridden, so sealing would make no difference.  Note this is stated from a C# perspective - the words are opposite in IL.  In IL, you have four choices in total: no declaration (which actually seals the method), 'virtual' (called 'override' in C#), 'sealed virtual' ('sealed override' in C#) and 'newslot virtual' ('new virtual' or 'virtual' in C#, depending on whether the method already exists in a base class). Methods that implement interface methods.  Methods that implement an interface method must be virtual, so cannot be sealed. Fields.  A field cannot be overridden, only hidden (using the 'new' keyword in C#), so sealing would make no sense.

  Read the article

• WebLogic Server–Use the Execution Context ID in Applications–Lessons From Hansel and Gretel

  - by james.bayer

  I learned a neat trick this week.  Don’t let your breadcrumbs go to waste like Hansel and Gretel did!  Keep track of the code path, logs and errors for each request as they flow through the system.  Earlier this week an OTN forum post in the WLS – General category by Oracle Ace John Stegeman asked a question how to retrieve the Execution Context ID so that it could be used on an error page that a user could provide to a help desk or use to check with application administrators so they could look up what went wrong.  What is the Execution Context ID (ECID)?  Fusion Middleware injects an ECID as a request enters the system and it says with the request as it flows from Oracle HTTP Server to Oracle Web Cache to multiple WebLogic Servers to the Oracle Database. It’s a way to uniquely identify a request across tiers.  According to the documentation it’s: The value of the ECID is a unique identifier that can be used to correlate individual events as being part of the same request execution flow. For example, events that are identified as being related to a particular request typically have the same ECID value.  The format of the ECID string itself is determined by an internal mechanism that is subject to change; therefore, you should not have or place any dependencies on that format. The novel idea that I see John had was to extend this concept beyond the diagnostic information that is captured by Fusion Middleware.  Why not also use this identifier in your logs and errors so you can correlate even more information together!  Your logging might already identify the user, so why not identify the request so you filter down even more.  All you need to do inside of WebLogic Server to get ahold of this information is invoke DiagnosticConextHelper: weblogic.diagnostics.context.DiagnosticContextHelper.getContextId() This class has other helpful methods to see other values tracked by the diagnostics framework too.  This way I can see even more detail and get information across tiers. In performance profiling, this can be very handy to track down where time is being spent in code.  I’ve blogged and made videos about this before.  JRockit Flight Recorder can use the WLDF Diagnostic Volume in WLS 10.3.3+ to automatically capture and correlate lots of helpful information for each request without installing any special agents and with the out-of-the-box JRockit and WLS settings!  You can see here how information is displayed in JRockit Flight Recorder about a single request as it calls a Servlet, which calls an EJB, which gets a DB connection, which starts a transaction, etc.  You can get timings around everything and even see the SQL that is used. http://download.oracle.com/docs/cd/E21764_01/web.1111/e13714/using_flightrecorder.htm#WLDFC480 Recent versions of the WLS console also are able to visualize this data too, so it works with other JVMs besides JRockit when you turn on WLDF instrumentation. I wrote a little sample application that verified to myself that the ECID did actually cross JVM boundaries.  I invoked a Servlet in one JVM, which acted as an EJB client to Stateless Session Bean running in another JVM.  Each call returned the same ECID.  You need to turn on WLDF Instrumentation for this to work otherwise the framework returns null.  I’m glad John put me on to this API as I have some interesting ideas on how to correlate some information together.

  Read the article

• Using a parser to locate faulty code

  - by ryan.riverside

  Lately I've been working a lot in PHP and have run into an abnormally large number of parsing errors. I realize these are my own fault and a result of sloppy initial coding on my part, but it's getting to the point that I'm spending more time resolving tags than developing. In the interest of not slamming my productivity, are there any tricks to locating the problem in the code? What I'd really be looking for would be a line to put in the code which would output the entire faulty tag in the parsing error, or something similar. Purely for reference sake, my current error is Parse error: syntax error, unexpected '}' in /home/content/80/9480880/html/cache/tpl_prosilver_viewtopic_body.html.php on line 50 (which refers to this): </dd><dd><?php if ($_poll_option_val['POLL_OPTION_RESULT'] == 0) { echo ((isset($this->_rootref['L_NO_VOTES'])) ? $this->_rootref['L_NO_VOTES'] : ((isset($user->lang['NO_VOTES'])) ? $user->lang['NO_VOTES'] : '{ NO_VOTES }')); } else { echo $_poll_option_val['POLL_OPTION_PERCENT']; } ?></dd> </dl> <?php }} if ($this->_rootref['S_DISPLAY_RESULTS']) { ?> <dl> <dt>&nbsp;</dt> <dd class="resultbar"><?php echo ((isset($this->_rootref['L_TOTAL_VOTES'])) ? $this->_rootref['L_TOTAL_VOTES'] : ((isset($user->lang['TOTAL_VOTES'])) ? $user->lang['TOTAL_VOTES'] : '{ TOTAL_VOTES }')); ?> : <?php echo (isset($this->_rootref['TOTAL_VOTES'])) ? $this->_rootref['TOTAL_VOTES'] : ''; ?></dd> </dl> <?php } if ($this->_rootref['S_CAN_VOTE']) { ?> <dl style="border-top: none;"> <dt>&nbsp;</dt> <dd class="resultbar"><input type="submit" name="update" value="<?php echo ((isset($this->_rootref['L_SUBMIT_VOTE'])) ? $this->_rootref['L_SUBMIT_VOTE'] : ((isset($user->lang['SUBMIT_VOTE'])) ? $user->lang['SUBMIT_VOTE'] : '{ SUBMIT_VOTE }')); ?>" class="button1" /></dd> </dl> <?php } if (! $this->_rootref['S_DISPLAY_RESULTS']) { ?> <dl style="border-top: none;"> <dt>&nbsp;</dt> <dd class="resultbar"><a href="<?php echo (isset($this->_rootref['U_VIEW_RESULTS'])) ? $this->_rootref['U_VIEW_RESULTS'] : ''; ?>"><?php echo ((isset($this->_rootref['L_VIEW_RESULTS'])) ? $this->_rootref['L_VIEW_RESULTS'] : ((isset($user->lang['VIEW_RESULTS'])) ? $user->lang['VIEW_RESULTS'] : '{ VIEW_RESULTS }')); ?></a></dd> </dl> <?php } ?> </fieldset></div>

  Read the article

• SQL SERVER – A Puzzle Part 4 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value

  - by pinaldave

  It seems like every weekend I get a new puzzle in my mind. Before continuing I suggest you read my previous posts here where I have shared earlier puzzles. A Puzzle – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value  A Puzzle Part 2 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value A Puzzle Part 3 – Fun with SEQUENCE in SQL Server 2012 – Guess the Next Value After reading above three posts, I am very confident that you all will be ready for the next set of puzzles now. First execute the script which I have written here. Now guess what will be the next value as requested in the query. USE TempDB GO -- Create sequence CREATE SEQUENCE dbo.SequenceID AS DECIMAL(3,0) START WITH 1 INCREMENT BY -1 MINVALUE 1 MAXVALUE 3 CYCLE NO CACHE; GO SELECT next value FOR dbo.SequenceID; -- Guess the number SELECT next value FOR dbo.SequenceID; -- Clean up DROP SEQUENCE dbo.SequenceID; GO Please note that Starting value is 1, Increment value is the negative value of -1 and Minimum value is 3. Now let us first assume how this will work out. In our example of the sequence starting value is equal to 1 and decrement value is -1, this means the value should decrement from 1 to 0. However, the minimum value is 1. This means the value cannot further decrement at all. What will happen here? The natural assumption is that it should throw an error. How many of you are assuming about query will throw an ERROR? Well, you are WRONG! Do not blame yourself, it is my fault as I have told you only half of the story. Now if you have voted for error, let us continue running above code in SQL Server Management Studio. The above script will give the following output: Isn’t it interesting that instead of error out it is giving us result value 3. To understand the answer about the same, carefully observe the original syntax of creating SEQUENCE – there is a keyword CYCLE. This keyword cycles the values between the minimum and maximum value and when one of the range is exhausted it cycles the values from the other end of the cycle. As we have negative incremental value when query reaches to the minimum value or lower end it will cycle it from the maximum value. Here the maximum value is 3 so the next logical value is 3. If your business requirement is such that if sequence reaches the maximum or minimum value, it should throw an error, you should not use the keyword cycle, and it will behave as discussed. I hope, you are enjoying the puzzles as much as I am enjoying it. If you have any interesting puzzle to share, please do share with me and I will share this on blog with due credit to you. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology

  Read the article

• Nec USB 3.0 controller drops connection - Ubuntu 12.04.1

  - by Tom

  I have some serious problems with Technaxx pci-e 302p card. It has uPD720200a NEC chip with 4020 firmware. BIOS recognises it. Sometimes it recognises devices and system mounts them and are functional for few minutes, other times they can't be mount and error occours. After fresh install card worked fine, but after kernel and firmware update it behaves as mentioned. Outputs: uname -a Linux asd-GA-MA770-UD3 3.2.0-30-generic #48-Ubuntu SMP Fri Aug 24 16:52:48 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lspci -vvv USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fd8fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 07d1:3c0a D-Link System DWA-140 RangeBooster N Adapter(rev.B2) [Ralink RT3072] Bus 005 Device 004: ID 1997:1221 Bus 005 Device 003: ID 15c2:003c SoundGraph Inc. lsmod Module Size Used by nls_iso8859_1 12713 0 nls_cp437 16991 0 vfat 17585 0 fat 61512 1 vfat vesafb 13844 1 saa7134_alsa 18602 1 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep tda827x 18182 1 snd_hda_codec_hdmi 32474 1 ir_lirc_codec 12859 0 lirc_dev 19204 1 ir_lirc_codec tda8290 22616 1 arc4 12529 2 snd_hda_codec_realtek 224173 1 ir_mce_kbd_decoder 12777 0 ir_sony_decoder 12510 0 ir_jvc_decoder 12507 0 tuner 27428 1 ir_rc6_decoder 12507 0 snd_hda_intel 33773 5 rt2800usb 22684 0 rt2800lib 58925 1 rt2800usb crc_ccitt 12667 1 rt2800lib rt2x00usb 20762 1 rt2800usb rt2x00lib 51144 3 rt2800usb,rt2800lib,rt2x00usb mac80211 506816 3 rt2800lib,rt2x00usb,rt2x00lib ir_rc5_decoder 12507 0 rc_avermedia_m135a 12526 0 rc_imon_pad 12505 0 ir_nec_decoder 12507 0 cfg80211 205544 2 rt2x00lib,mac80211 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_ctxfi 111202 2 snd_hwdep 13668 1 snd_hda_codec imon 32839 0 snd_pcm 97188 5 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_ctxfi snd_seq_midi 13324 0 saa7134 181851 1 saa7134_alsa videobuf_dma_sg 19354 2 saa7134_alsa,saa7134 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi joydev 17693 0 rc_core 26412 13 ir_lirc_codec,ir_mce_kbd_decoder,ir_sony_decoder,ir_jvc_decoder,ir_rc6_decoder,ir_rc5_decoder,rc_avermedia_m135a,rc_imon_pad,ir_nec_decoder,imon,saa7134 snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 101 videobuf_core 26390 2 saa7134,videobuf_dma_sg v4l2_common 16454 2 tuner,saa7134 videodev 98259 3 tuner,saa7134,v4l2_common sp5100_tco 13791 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 28 saa7134_alsa,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_ctxfi,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device v4l2_compat_ioctl32 17128 1 videodev tveeprom 21249 1 saa7134 i2c_piix4 13301 0 soundcore 15091 1 snd edac_core 53746 0 serio_raw 13211 0 snd_page_alloc 18529 3 snd_hda_intel,snd_ctxfi,snd_pcm edac_mce_amd 23709 0 wmi 19256 0 mac_hid 13253 0 ppdev 17113 0 parport_pc 32866 1 k10temp 13166 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usb_storage 49198 0 uas 18180 0 usbhid 47199 0 hid 99559 1 usbhid firewire_ohci 41000 0 firewire_core 63558 1 firewire_ohci crc_itu_t 12707 1 firewire_core floppy 70365 0 pata_atiixp 13204 2 r8169 62099 0 dmesg | tail after plugging to usb 3.0 port [ 834.871296] sd 9:0:0:0: rejecting I/O to offline device [ 834.871308] sd 9:0:0:0: rejecting I/O to offline device [ 834.871319] sd 9:0:0:0: rejecting I/O to offline device [ 834.871330] sd 9:0:0:0: rejecting I/O to offline device [ 834.871530] sd 9:0:0:0: [sdd] Unhandled error code [ 834.871536] sd 9:0:0:0: [sdd] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 834.871545] sd 9:0:0:0: [sdd] CDB: Read(10): 28 00 0e 8e 48 0a 00 00 3e 00 [ 834.871564] end_request: I/O error, dev sdd, sector 244205578 [ 834.875497] sd 8:0:0:1: Device offlined - not ready after error recovery [ 834.885339] usb 9-2: USB disconnect, device number 2 Are there any other outputs need for answering? I'll post them ASAP. I could of course reject updating the system but I think it's halfway solution. Any help appreciated. BTW USB 2.0 and 1.1 ports run well, card itself runs under win7 as charm. Tom

  Read the article

• The Virtues and Challenges of Implementing Basel III: What Every CFO and CRO Needs To Know

  - by Jenna Danko

  The Basel Committee on Banking Supervision (BCBS) is a group tasked with providing thought-leadership to the global banking industry.  Over the years, the BCBS has released volumes of guidance in an effort to promote stability within the financial sector.  By effectively communicating best-practices, the Basel Committee has influenced financial regulations worldwide.  Basel regulations are intended to help banks: More easily absorb shocks due to various forms of financial-economic stress Improve risk management and governance Enhance regulatory reporting and transparency In June 2011, the BCBS released Basel III: A global regulatory framework for more resilient banks and banking systems.  This new set of regulations included many enhancements to previous rules and will have both short and long term impacts on the banking industry.  Some of the key features of Basel III include: A stronger capital base More stringent capital standards and higher capital requirements Introduction of capital buffers  Additional risk coverage Enhanced quantification of counterparty credit risk Credit valuation adjustments  Wrong  way risk  Asset Value Correlation Multiplier for large financial institutions Liquidity management and monitoring Introduction of leverage ratio Even more rigorous data requirements To implement these features banks need to embark on a journey replete with challenges. These can be categorized into three key areas: Data, Models and Compliance. Data Challenges Data quality - All standard dimensions of Data Quality (DQ) have to be demonstrated.  Manual approaches are now considered too cumbersome and automation has become the norm. Data lineage - Data lineage has to be documented and demonstrated.  The PPT / Excel approach to documentation is being replaced by metadata tools.  Data lineage has become dynamic due to a variety of factors, making static documentation out-dated quickly.  Data dictionaries - A strong and clean business glossary is needed with proper identification of business owners for the data.  Data integrity - A strong, scalable architecture with work flow tools helps demonstrate data integrity.  Manual touch points have to be minimized.   Data relevance/coverage - Data must be relevant to all portfolios and storage devices must allow for sufficient data retention.  Coverage of both on and off balance sheet exposures is critical.   Model Challenges Model development - Requires highly trained resources with both quantitative and subject matter expertise. Model validation - All Basel models need to be validated. This requires additional resources with skills that may not be readily available in the marketplace.  Model documentation - All models need to be adequately documented.  Creation of document templates and model development processes/procedures is key. Risk and finance integration - This integration is necessary for Basel as the Allowance for Loan and Lease Losses (ALLL) is calculated by Finance, yet Expected Loss (EL) is calculated by Risk Management – and they need to somehow be equal.  This is tricky at best from an implementation perspective.  Compliance Challenges Rules interpretation - Some Basel III requirements leave room for interpretation.  A misinterpretation of regulations can lead to delays in Basel compliance and undesired reprimands from supervisory authorities. Gap identification and remediation - Internal identification and remediation of gaps ensures smoother Basel compliance and audit processes.  However business lines are challenged by the competing priorities which arise from regulatory compliance and business as usual work.  Qualification readiness - Providing internal and external auditors with robust evidence of a thorough examination of the readiness to proceed to parallel run and Basel qualification  In light of new regulations like Basel III and local variations such as the Dodd Frank Act (DFA) and Comprehensive Capital Analysis and Review (CCAR) in the US, banks are now forced to ask themselves many difficult questions.  For example, executives must consider: How will Basel III play into their Risk Appetite? How will they create project plans for Basel III when they haven’t yet finished implementing Basel II? How will new regulations impact capital structure including profitability and capital distributions to shareholders? After all, new regulations often lead to diminished profitability as well as an assortment of implementation problems as we discussed earlier in this note.  However, by requiring banks to focus on premium growth, regulators increase the potential for long-term profitability and sustainability.  And a more stable banking system: Increases consumer confidence which in turn supports banking activity  Ensures that adequate funding is available for individuals and companies Puts regulators at ease, allowing bankers to focus on banking Stability is intended to bring long-term profitability to banks.  Therefore, it is important that every banking institution takes the steps necessary to properly manage, monitor and disclose its risks.  This can be done with the assistance and oversight of an independent regulatory authority.  A spectrum of banks exist today wherein some continue to debate and negotiate with regulators over the implementation of new requirements, while others are simply choosing to embrace them for the benefits I highlighted above. Do share with me how your institution is coping with and embracing these new regulations within your bank. Dr. Varun Agarwal is a Principal in the Banking Practice for Capgemini Financial Services.  He has over 19 years experience in areas that span from enterprise risk management, credit, market, and to country risk management; financial modeling and valuation; and international financial markets research and analyses.

  Read the article

• Windows Azure Recipe: Social Web / Big Media

  - by Clint Edmonson

  With the rise of social media there’s been an explosion of special interest media web sites on the web. From athletics to board games to funny animal behaviors, you can bet there’s a group of people somewhere on the web talking about it. Social media sites allow us to interact, share experiences, and bond with like minded enthusiasts around the globe. And through the power of software, we can follow trends in these unique domains in real time. Drivers Reach Scalability Media hosting Global distribution Solution Here’s a sketch of how a social media application might be built out on Windows Azure: Ingredients Traffic Manager (optional) – can be used to provide hosting and load balancing across different instances and/or data centers. Perfect if the solution needs to be delivered to different cultures or regions around the world. Access Control – this service is essential to managing user identity. It’s backed by a full blown implementation of Active Directory and allows the definition and management of users, groups, and roles. A pre-built ASP.NET membership provider is included in the training kit to leverage this capability but it’s also flexible enough to be combined with external Identity providers including Windows LiveID, Google, Yahoo!, and Facebook. The provider model has extensibility points to hook into other identity providers as well. Web Role – hosts the core of the web application and presents a central social hub users. Database – used to store core operational, functional, and workflow data for the solution’s web services. Caching (optional) – as a web site traffic grows caching can be leveraged to keep frequently used read-only, user specific, and application resource data in a high-speed distributed in-memory for faster response times and ultimately higher scalability without spinning up more web and worker roles. It includes a token based security model that works alongside the Access Control service. Tables (optional) – for semi-structured data streams that don’t need relational integrity such as conversations, comments, or activity streams, tables provide a faster and more flexible way to store this kind of historical data. Blobs (optional) – users may be creating or uploading large volumes of heterogeneous data such as documents or rich media. Blob storage provides a scalable, resilient way to store terabytes of user data. The storage facilities can also integrate with the Access Control service to ensure users’ data is delivered securely. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training These links point to online Windows Azure training labs and resources where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• ArchBeat Link-o-Rama Top 10 for September 2-8, 2012

  - by Bob Rhubart

  The Top 10 items shared on the OTN Facebook Page for the week of September 2-8, 2012. Adding a runtime LOV for a taskflow parameter in WebCenter | Yannick Ongena Oracle ACE Yannick Ongena illustrates how to customize the parameters tab for a taskflow in WebCenter. Tips on Migrating from AquaLogic .NET Accelerator to WebCenter WSRP Producer for .NET | Scott Nelson "It has been a very winding path and this blog entry is intended to share both the lessons learned and relevant approaches that led to those learnings," says Scott Nelson. "Like most journeys of discovery, it was not a direct path, and there are notes to let you know when it is practical to skip a section if you are in a hurry to get from here to there." Free Event: Oracle Technology Network Architect Day – Boston, MA – 9/12/2012 Sure, you could ask a voodoo priestess for help in improving your solution architecture skills. But there's the whole snake thing, and the zombie thing, and other complications. So why not keep it simple and register for Oracle Technology Network Architect Day in Boston, MA. There's no magic, just a full day of technical sessions covering Cloud, SOA, Engineered Systems, and more. Registration is free, but seating is limited. You'll curse yourself if you miss this one. Starting and Stopping Fusion Applications the Right Way | Ronaldo Viscuso While the fastartstop tool that ships with Oracle Fusion Applications does most of the work to start/stop/bounce the Fusion Apps environment, it does not do it all. Oracle Fusion Applications A-Team blogger Ronaldo Viscuso's post "aims to explain all tasks involved in starting and stopping a Fusion Apps environment completely." Article Index: Architect Community Column in Oracle Magazine Did you know that Oracle Magazine features a regular column devoted specifically to the architect community? Every issue includes insight and expertise from architects who regularly work with Oracle Technologies. Click here to see a complete list of these articles. Using FMAP and AnalyticsRes in a Oracle BI High Availability Implementation | Art of Business Intelligence "The fmap syntax has been used for a long time in Oracle BI / Siebel Analytics when referencing images inherent in the application as well as custom images," says Oracle ACE Christian Screen. "This syntax is used on Analysis requests an dashboards." Dodeca Customer Feedback - The Rosewood Company | Tim Tow Oracle ACE Director Tim Tow shares anecdotal comments from one of his clients, a company that is deploying Dodeca to replace an aging VBA/Essbase application. Configuring UCM cache to check for external Content Server changes | Martin Deh Oracle WebCenter and ADF A-Team blogger shares the background information and the solution to a recently encountered customer scenario. Attend OTN Architect Day in Los Angeles – by Architects, for Architects – October 25 The OTN Architect Day roadshow stops in Boston next week, then it's on to Los Angeles for another all architecture, all day event on Thursday October 25, 2012 at the Sofitel Los Angeles, 555 Beverly Boulevard, Los Angeles, CA 90048. Like all Architect Day events, this one is absolutley free, so register now. The Role of Oracle VM Server for SPARC In a Virtualization Strategy New OTN article from Matthias Pfutzner. Thought for the Day "Practicing architects, through eduction, experience and examples, accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• ArchBeat Link-o-Rama for 2012-08-30

  - by Bob Rhubart

  Next Generation Mobile Clients for Oracle Applications & the role of Oracle Fusion Middleware | Manish Palaparthy Manish Palaparthy examines some of Oracle's mobile applications, and takes a look at the underlying technology. Master Data Management: A Foundation for Big Data Analysis | Manouj Tahiliani "Businesses that have embraced MDM to get a single, enriched and unified view of Master data by resolving semantic discrepancies and augmenting the explicit master data information from within the enterprise with implicit data from outside the enterprise like social profiles will have a leg up in embracing Big Data solutions. This is especially true for large and medium-sized businesses in industries like Retail, Communications, Financial Services, etc that would find it very challenging to get comprehensive analytical coverage and derive long-term success without resolving the limitations of the heterogeneous topology that leads to disparate, fragmented and incomplete master data." — Manouj Tahiliani Architect Day: Boston - Agenda Update Here's the latest updated information on the session schedule and content for Oracle Technology Network Architect Day in Boston, MA on September 12, 2012. Registration is open, but seating is limited. OTN Architect Day: Boston is being held on Wednesday September 12, 2012, 8:00 a.m. – 5:00 p.m., at the Boston Marriott Burlington, One Burlington Mall Road, Burlington, MA 01803. Integrating Coherence & Java EE 6 Applications using ActiveCache | Ricardo Ferreira The seamless integration between Oracle Coherence and Oracle WebLogic Server "provides a comprehensive environment to develop applications without the complexity of extra Java code to manage cache as a dependency," explains Ricardo Ferreira, "since Oracle provides a DI (Dependency Injection) mechanism for Coherence, the same DI mechanism available in standard Java EE applications. This feature is called ActiveCache." Ricardo shows you how to configure ActiveCache in WebLogic and your Java EE application. Cloud Infrastructure has a new standard from the DMTF "Unlike a de facto standard where typically one vendor has change control over the interface, and everyone else has to reverse engineer the inner workings of it, [Cloud Infrastructure Management Interface (CIMI)] is a de jure standard that is under change control of a standards body. One reason the standard took two years to create is that we factored in use cases, requirements and contributed APIs from multiple vendors. These vendors have products shipping today and as a result CIMI has a strong foundation in real world experience." Oracle GoldenGate 11g Release Launch Webcast- September 12 The new release of Oracle GoldenGate 11g is now available for major databases and platforms. Register for this webcast and live Q&A with product experts to learn about the solution's new features. September 12, 2012. 8:00am AM and 10:00AM PT. Speakers: Doug Reid (Director, Product Management, Oracle GoldenGate), Irem Radzik (Director, Product Marketing, Oracle Data Integration Products) Thought for the Day "[When] asking skilled architects…what they do when confronted with highly complex problems… [they] would most likely answer, 'Just use Common Sense.' [A] better expression than 'common sense' is 'contextual sense'—a knowledge of what is reasonable within a given context. Practicing architects through eduction, experience and examples accumulate a considerable body of contextual sense by the time they're entrusted with solving a system-level problem…" — Eberhardt Rechtin (January 16, 1926 – April 14, 2006) Source: SoftwareQuotes.com

  Read the article

• Ajax Autocomplete Extender

  - by Jason Ulloa

  El objetivo de este post es preparar un ejemplo sobre un tema que es planteado muy frecuentemente en los Foros de MSDN, como realizar un Autocomplete contra una base de datos. Qué requerimos? Antes de poder realizar un Autocomplete debemos tener en cuenta los elementos principales que requerimos para poder hacerlo funcionar, descritos de la siguiente manera: 1. Textbox: Nuestro grandioso amigo Textbox, que será donde el usuario ingresará los datos a buscar. 2. Un Webservice: que contendrá el método que se conectara a la base de datos y devolverá una lista con la información encontrada. 3. Ajax Autocomplete Extender: este es por decirlo así, el elemento más importante. Nos servirá como medio de enlace entre el webservice que expone el método y el textbox recuperando y mostrando los datos en forma de lista desplegable. La implementación Si bien parecierá complicado, crear un autocomplete extender es bastante sencillo. Empezaremos creando un nuevo sitio asp.net, en este sitio agregaremos un textbox y dos controles muy importantes de Ajax el ToolkitScriptManager para controlar el rende rizado de los script de ajax y el AutocompleteExtender que, como mencione anteriormente, será el medio de enlace. Antes de mostrar como quedará el código de lo anterior, explicaré algunas propiedades del AutocompleteExtender para que se entienda de mejor manera: 1. El ServicePath: contiene la ruta relativa al webservice que utilizaremos. 2. MinimumPrefixLength: se refiere al número de caracteres que deben ser digitados antes de iniciar la búsqueda. 3. ServiceMethod: el nombre del metodo de nuestro webservice que se encargará de devolver los datos. 4. EnableCaching: para mantener en cache los datos consultados, obteniendo mayor velocidad. 5. TargetControlID: una de las propiedades más importantes, acá se coloca el nombre del textbox al cual se unirá el Autocomplete 6. CompletionInterval: tiempo que debe transcurrir antes de iniciar con el trabajo de los datos. Una vez, explicadas las propiedades básicas, veamos como queda implementada la primer parte de nuestro autocomplete: <form id="form1" runat="server"> <div> <asp:ToolkitScriptManager ID="manager" runat="server" /> <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> <asp:AutoCompleteExtender ID="AutoCompleteExtender1" runat="server" ServicePath="WebService.asmx" MinimumPrefixLength="1" ServiceMethod="PersonasInfo " EnableCaching="true" TargetControlID="TextBox1" UseContextKey="True" CompletionSetCount="10" CompletionInterval="0"> </asp:AutoCompleteExtender> </div> </form>   Ahora que nuestro código html está completo, es hora de trabajar directamente con nuestro webservice, este deberá contener un método que devuelva una lista o arreglo de datos, los cuales por supuesto, serán traídos desde la base de datos. Antes de implementar este método, debemos asegurarnos de que nuestra clase del webservice tiene habilitados los espacios para ser utilizada [System.Web.Script.Services.ScriptService()] [WebService(Namespace = "http://tempuri.org/")] [WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)] public class WebService : System.Web.Services.WebService {}   Ahora si, nuestro metodo principal [WebMethod()] [System.Web.Script.Services.ScriptMethod()] public string[] PersonasInfo(string prefixText, int count) { string connstring = ConfigurationManager.ConnectionStrings["LocalSqlServer"].ConnectionString;   using (SqlConnection conn = new SqlConnection(connstring)) { SqlCommand comando = new SqlCommand("select nombre from personas where nombre LIKE '%' + @param + '%' ", conn); comando.Parameters.AddWithValue("@param", prefixText); SqlDataReader dr = default(SqlDataReader); comando.Connection.Open(); dr = comando.ExecuteReader(); List<string> items = new List<string>();   while (dr.Read()) { items.Add(dr["nombre"].ToString()); } comando.Connection.Close(); return items.ToArray(); } }   Del método anterior no explicaré en profundidad, pues es bastante sencillo. Una consulta a la base de datos utilizando un datareader y devolviendo los datos en una lista como arreglo. Lo más importante serían las 2 primeras líneas [WebMethod()] y el [ScriptMethod()] las cuales habilitan nuestro método para poder ser accedido y utilizado. Por último, el código de ejemplo en C# (VB Autcomplete):

  Read the article

• Cardinality Estimation Bug with Lookups in SQL Server 2008 onward

  - by Paul White

  Cost-based optimization stands or falls on the quality of cardinality estimates (expected row counts).  If the optimizer has incorrect information to start with, it is quite unlikely to produce good quality execution plans except by chance.  There are many ways we can provide good starting information to the optimizer, and even more ways for cardinality estimation to go wrong.  Good database people know this, and work hard to write optimizer-friendly queries with a schema and metadata (e.g. statistics) that reduce the chances of poor cardinality estimation producing a sub-optimal plan.  Today, I am going to look at a case where poor cardinality estimation is Microsoft’s fault, and not yours. SQL Server 2005 SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; The query plan on SQL Server 2005 is as follows (if you are using a more recent version of AdventureWorks, you will need to change the year on the date range from 2003 to 2007): There is an Index Seek on ProductID = 1, followed by a Key Lookup to find the Transaction Date for each row, and finally a Filter to restrict the results to only those rows where Transaction Date falls in the range specified.  The cardinality estimate of 45 rows at the Index Seek is exactly correct.  The table is not very large, there are up-to-date statistics associated with the index, so this is as expected. The estimate for the Key Lookup is also exactly right.  Each lookup into the Clustered Index to find the Transaction Date is guaranteed to return exactly one row.  The plan shows that the Key Lookup is expected to be executed 45 times.  The estimate for the Inner Join output is also correct – 45 rows from the seek joining to one row each time, gives 45 rows as output. The Filter estimate is also very good: the optimizer estimates 16.9951 rows will match the specified range of transaction dates.  Eleven rows are produced by this query, but that small difference is quite normal and certainly nothing to worry about here.  All good so far. SQL Server 2008 onward The same query executed against an identical copy of AdventureWorks on SQL Server 2008 produces a different execution plan: The optimizer has pushed the Filter conditions seen in the 2005 plan down to the Key Lookup.  This is a good optimization – it makes sense to filter rows out as early as possible.  Unfortunately, it has made a bit of a mess of the cardinality estimates. The post-Filter estimate of 16.9951 rows seen in the 2005 plan has moved with the predicate on Transaction Date.  Instead of estimating one row, the plan now suggests that 16.9951 rows will be produced by each clustered index lookup – clearly not right!  This misinformation also confuses SQL Sentry Plan Explorer: Plan Explorer shows 765 rows expected from the Key Lookup (it multiplies a rounded estimate of 17 rows by 45 expected executions to give 765 rows total). Workarounds One workaround is to provide a covering non-clustered index (avoiding the lookup avoids the problem of course): CREATE INDEX nc1 ON Production.TransactionHistory (ProductID) INCLUDE (TransactionDate); With the Transaction Date filter applied as a residual predicate in the same operator as the seek, the estimate is again as expected: We could also force the use of the ultimate covering index (the clustered one): SELECT th.ProductID, th.TransactionID, th.TransactionDate FROM Production.TransactionHistory AS th WITH (INDEX(1)) WHERE th.ProductID = 1 AND th.TransactionDate BETWEEN '20030901' AND '20031231'; Summary Providing a covering non-clustered index for all possible queries is not always practical, and scanning the clustered index will rarely be optimal.  Nevertheless, these are the best workarounds we have today. In the meantime, watch out for poor cardinality estimates when a predicate is applied as part of a lookup. The worst thing is that the estimate after the lookup join in the 2008+ plans is wrong.  It’s not hopelessly wrong in this particular case (45 versus 16.9951 is not the end of the world) but it easily can be much worse, and there’s not much you can do about it.  Any decisions made by the optimizer after such a lookup could be based on very wrong information – which can only be bad news. If you think this situation should be improved, please vote for this Connect item. © 2012 Paul White – All Rights Reserved twitter: @SQL_Kiwi email: [email protected]

  Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >